diff options
author | Geert Uytterhoeven <geert+renesas@glider.be> | 2017-06-07 14:20:06 +0300 |
---|---|---|
committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2017-10-20 12:15:29 +0300 |
commit | 560869100b99a3daea329efce738a3b7ae357be8 (patch) | |
tree | 68cf1b8145d8646a1c5127d835e79e90ce9c7b77 /drivers/clk | |
parent | d9341f2b00c0f2a50e1fada55f6a2a2c51818ae6 (diff) | |
download | linux-560869100b99a3daea329efce738a3b7ae357be8.tar.xz |
clk: renesas: cpg-mssr: Restore module clocks during resume
During PSCI system suspend, R-Car Gen3 SoCs are powered down, and their
clock register state is lost. Note that as the boot loader skips most
initialization after system resume, clock register state differs from
the state encountered during normal system boot, too.
Hence after s2ram, some operations may fail because module clocks are
disabled, while drivers expect them to be still enabled. E.g. EtherAVB
fails when Wake-on-LAN has been enabled using "ethtool -s eth0 wol g":
ravb e6800000.ethernet eth0: failed to switch device to config mode
ravb e6800000.ethernet eth0: device will be stopped after h/w processes are done.
ravb e6800000.ethernet eth0: failed to switch device to config
PM: Device e6800000.ethernet failed to resume: error -110
In addition, some module clocks that were disabled by
clk_disable_unused() may have been re-enabled, wasting power.
To fix this, restore all bits of the SMSTPCR registers that represent
clocks under control of Linux.
Notes:
- While this fixes EtherAVB operation after resume from s2ram,
EtherAVB cannot be used as an actual wake-up source from s2ram, only
from s2idle, due to PSCI limitations,
- To avoid overhead on platforms not needing it, the suspend/resume
code has a build time dependency on sleep and PSCI support, and a
runtime dependency on PSCI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/renesas/renesas-cpg-mssr.c | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 1779b0cc7a2a..15fc8679d342 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -26,6 +26,7 @@ #include <linux/platform_device.h> #include <linux/pm_clock.h> #include <linux/pm_domain.h> +#include <linux/psci.h> #include <linux/reset-controller.h> #include <linux/slab.h> @@ -106,6 +107,8 @@ static const u16 srcr[] = { * @num_core_clks: Number of Core Clocks in clks[] * @num_mod_clks: Number of Module Clocks in clks[] * @last_dt_core_clk: ID of the last Core Clock exported to DT + * @smstpcr_saved[].mask: Mask of SMSTPCR[] bits under our control + * @smstpcr_saved[].val: Saved values of SMSTPCR[] */ struct cpg_mssr_priv { #ifdef CONFIG_RESET_CONTROLLER @@ -119,6 +122,11 @@ struct cpg_mssr_priv { unsigned int num_core_clks; unsigned int num_mod_clks; unsigned int last_dt_core_clk; + + struct { + u32 mask; + u32 val; + } smstpcr_saved[ARRAY_SIZE(smstpcr)]; }; @@ -382,6 +390,7 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod, dev_dbg(dev, "Module clock %pC at %pCr Hz\n", clk, clk); priv->clks[id] = clk; + priv->smstpcr_saved[clock->index / 32].mask |= BIT(clock->index % 32); return; fail: @@ -700,6 +709,79 @@ static void cpg_mssr_del_clk_provider(void *data) of_clk_del_provider(data); } +#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_ARM_PSCI_FW) +static int cpg_mssr_suspend_noirq(struct device *dev) +{ + struct cpg_mssr_priv *priv = dev_get_drvdata(dev); + unsigned int reg; + + /* This is the best we can do to check for the presence of PSCI */ + if (!psci_ops.cpu_suspend) + return 0; + + /* Save module registers with bits under our control */ + for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) { + if (priv->smstpcr_saved[reg].mask) + priv->smstpcr_saved[reg].val = + readl(priv->base + SMSTPCR(reg)); + } + + return 0; +} + +static int cpg_mssr_resume_noirq(struct device *dev) +{ + struct cpg_mssr_priv *priv = dev_get_drvdata(dev); + unsigned int reg, i; + u32 mask, oldval, newval; + + /* This is the best we can do to check for the presence of PSCI */ + if (!psci_ops.cpu_suspend) + return 0; + + /* Restore module clocks */ + for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) { + mask = priv->smstpcr_saved[reg].mask; + if (!mask) + continue; + + oldval = readl(priv->base + SMSTPCR(reg)); + newval = oldval & ~mask; + newval |= priv->smstpcr_saved[reg].val & mask; + if (newval == oldval) + continue; + + writel(newval, priv->base + SMSTPCR(reg)); + + /* Wait until enabled clocks are really enabled */ + mask &= ~priv->smstpcr_saved[reg].val; + if (!mask) + continue; + + for (i = 1000; i > 0; --i) { + oldval = readl(priv->base + MSTPSR(reg)); + if (!(oldval & mask)) + break; + cpu_relax(); + } + + if (!i) + dev_warn(dev, "Failed to enable SMSTP %p[0x%x]\n", + priv->base + SMSTPCR(reg), oldval & mask); + } + + return 0; +} + +static const struct dev_pm_ops cpg_mssr_pm = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(cpg_mssr_suspend_noirq, + cpg_mssr_resume_noirq) +}; +#define DEV_PM_OPS &cpg_mssr_pm +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP && CONFIG_ARM_PSCI_FW */ + static int __init cpg_mssr_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -735,6 +817,7 @@ static int __init cpg_mssr_probe(struct platform_device *pdev) if (!clks) return -ENOMEM; + dev_set_drvdata(dev, priv); priv->clks = clks; priv->num_core_clks = info->num_total_core_clks; priv->num_mod_clks = info->num_hw_mod_clks; @@ -775,6 +858,7 @@ static struct platform_driver cpg_mssr_driver = { .driver = { .name = "renesas-cpg-mssr", .of_match_table = cpg_mssr_match, + .pm = DEV_PM_OPS, }, }; |