powerpc: Remove bootmem allocator

At the moment we transition from the memblock alloctor to the bootmem
allocator. Gitting rid of the bootmem allocator removes a bunch of
complicated code (most of which I owe the dubious honour of being
responsible for writing).

Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 34 insertions, 190 deletions

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b9d1dfdbe5bb..2e9ad2d76b75 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -134,28 +134,6 @@ static int __init fake_numa_create_new_node(unsigned long end_pfn,
 	return 0;
 }
 
-/*
- * get_node_active_region - Return active region containing pfn
- * Active range returned is empty if none found.
- * @pfn: The page to return the region for
- * @node_ar: Returned set to the active region containing @pfn
- */
-static void __init get_node_active_region(unsigned long pfn,
-					  struct node_active_region *node_ar)
-{
-	unsigned long start_pfn, end_pfn;
-	int i, nid;
-
-	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
-		if (pfn >= start_pfn && pfn < end_pfn) {
-			node_ar->nid = nid;
-			node_ar->start_pfn = start_pfn;
-			node_ar->end_pfn = end_pfn;
-			break;
-		}
-	}
-}
-
 static void reset_numa_cpu_lookup_table(void)
 {
 	unsigned int cpu;
@@ -928,134 +906,48 @@ static void __init dump_numa_memory_topology(void)
 	}
 }
 
-/*
- * Allocate some memory, satisfying the memblock or bootmem allocator where
- * required. nid is the preferred node and end is the physical address of
- * the highest address in the node.
- *
- * Returns the virtual address of the memory.
- */
-static void __init *careful_zallocation(int nid, unsigned long size,
-				       unsigned long align,
-				       unsigned long end_pfn)
-{
-	void *ret;
-	int new_nid;
-	unsigned long ret_paddr;
-
-	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
-
-	/* retry over all memory */
-	if (!ret_paddr)
-		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
-
-	if (!ret_paddr)
-		panic("numa.c: cannot allocate %lu bytes for node %d",
-		      size, nid);
-
-	ret = __va(ret_paddr);
-
-	/*
-	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the MEMBLOCK allocator to the
-	 * bootmem allocator.  If this function is called for
-	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the MEMBLOCK allocator.
-	 *
-	 * So, check the nid from which this allocation came
-	 * and double check to see if we need to use bootmem
-	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
-	 * since it would be useless.
-	 */
-	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
-	if (new_nid < nid) {
-		ret = __alloc_bootmem_node(NODE_DATA(new_nid),
-				size, align, 0);
-
-		dbg("alloc_bootmem %p %lx\n", ret, size);
-	}
-
-	memset(ret, 0, size);
-	return ret;
-}
-
 static struct notifier_block ppc64_numa_nb = {
 	.notifier_call = cpu_numa_callback,
 	.priority = 1 /* Must run before sched domains notifier. */
 };
 
-static void __init mark_reserved_regions_for_nid(int nid)
+/* Initialize NODE_DATA for a node on the local memory */
+static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 {
-	struct pglist_data *node = NODE_DATA(nid);
-	struct memblock_region *reg;
-
-	for_each_memblock(reserved, reg) {
-		unsigned long physbase = reg->base;
-		unsigned long size = reg->size;
-		unsigned long start_pfn = physbase >> PAGE_SHIFT;
-		unsigned long end_pfn = PFN_UP(physbase + size);
-		struct node_active_region node_ar;
-		unsigned long node_end_pfn = pgdat_end_pfn(node);
-
-		/*
-		 * Check to make sure that this memblock.reserved area is
-		 * within the bounds of the node that we care about.
-		 * Checking the nid of the start and end points is not
-		 * sufficient because the reserved area could span the
-		 * entire node.
-		 */
-		if (end_pfn <= node->node_start_pfn ||
-		    start_pfn >= node_end_pfn)
-			continue;
-
-		get_node_active_region(start_pfn, &node_ar);
-		while (start_pfn < end_pfn &&
-			node_ar.start_pfn < node_ar.end_pfn) {
-			unsigned long reserve_size = size;
-			/*
-			 * if reserved region extends past active region
-			 * then trim size to active region
-			 */
-			if (end_pfn > node_ar.end_pfn)
-				reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
-					- physbase;
-			/*
-			 * Only worry about *this* node, others may not
-			 * yet have valid NODE_DATA().
-			 */
-			if (node_ar.nid == nid) {
-				dbg("reserve_bootmem %lx %lx nid=%d\n",
-					physbase, reserve_size, node_ar.nid);
-				reserve_bootmem_node(NODE_DATA(node_ar.nid),
-						physbase, reserve_size,
-						BOOTMEM_DEFAULT);
-			}
-			/*
-			 * if reserved region is contained in the active region
-			 * then done.
-			 */
-			if (end_pfn <= node_ar.end_pfn)
-				break;
-
-			/*
-			 * reserved region extends past the active region
-			 *   get next active region that contains this
-			 *   reserved region
-			 */
-			start_pfn = node_ar.end_pfn;
-			physbase = start_pfn << PAGE_SHIFT;
-			size = size - reserve_size;
-			get_node_active_region(start_pfn, &node_ar);
-		}
-	}
+	u64 spanned_pages = end_pfn - start_pfn;
+	const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
+	u64 nd_pa;
+	void *nd;
+	int tnid;
+
+	if (spanned_pages)
+		pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n",
+			nid, start_pfn << PAGE_SHIFT,
+			(end_pfn << PAGE_SHIFT) - 1);
+	else
+		pr_info("Initmem setup node %d\n", nid);
+
+	nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
+	nd = __va(nd_pa);
+
+	/* report and initialize */
+	pr_info("  NODE_DATA [mem %#010Lx-%#010Lx]\n",
+		nd_pa, nd_pa + nd_size - 1);
+	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
+	if (tnid != nid)
+		pr_info("    NODE_DATA(%d) on node %d\n", nid, tnid);
+
+	node_data[nid] = nd;
+	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
+	NODE_DATA(nid)->node_id = nid;
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = spanned_pages;
 }
 
-
-void __init do_init_bootmem(void)
+void __init initmem_init(void)
 {
 	int nid, cpu;
 
-	min_low_pfn = 0;
 	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
@@ -1064,64 +956,16 @@ void __init do_init_bootmem(void)
 	else
 		dump_numa_memory_topology();
 
+	memblock_dump_all();
+
 	for_each_online_node(nid) {
 		unsigned long start_pfn, end_pfn;
-		void *bootmem_vaddr;
-		unsigned long bootmap_pages;
 
 		get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
-
-		/*
-		 * Allocate the node structure node local if possible
-		 *
-		 * Be careful moving this around, as it relies on all
-		 * previous nodes' bootmem to be initialized and have
-		 * all reserved areas marked.
-		 */
-		NODE_DATA(nid) = careful_zallocation(nid,
-					sizeof(struct pglist_data),
-					SMP_CACHE_BYTES, end_pfn);
-
-  		dbg("node %d\n", nid);
-		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
-
-		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
-		NODE_DATA(nid)->node_start_pfn = start_pfn;
-		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
-
-		if (NODE_DATA(nid)->node_spanned_pages == 0)
-  			continue;
-
-  		dbg("start_paddr = %lx\n", start_pfn << PAGE_SHIFT);
-  		dbg("end_paddr = %lx\n", end_pfn << PAGE_SHIFT);
-
-		bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-		bootmem_vaddr = careful_zallocation(nid,
-					bootmap_pages << PAGE_SHIFT,
-					PAGE_SIZE, end_pfn);
-
-		dbg("bootmap_vaddr = %p\n", bootmem_vaddr);
-
-		init_bootmem_node(NODE_DATA(nid),
-				  __pa(bootmem_vaddr) >> PAGE_SHIFT,
-				  start_pfn, end_pfn);
-
-		free_bootmem_with_active_regions(nid, end_pfn);
-		/*
-		 * Be very careful about moving this around.  Future
-		 * calls to careful_zallocation() depend on this getting
-		 * done correctly.
-		 */
-		mark_reserved_regions_for_nid(nid);
+		setup_node_data(nid, start_pfn, end_pfn);
 		sparse_memory_present_with_active_regions(nid);
 	}
 
-	init_bootmem_done = 1;
-
-	/*
-	 * Now bootmem is initialised we can create the node to cpumask
-	 * lookup tables and setup the cpu callback to populate them.
-	 */
 	setup_node_to_cpumask_map();
 
 	reset_numa_cpu_lookup_table();