summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorHebbar, Gururaja <gururaja.hebbar@ti.com>2012-11-19 20:29:58 +0400
committerChris Ball <cjb@laptop.org>2012-12-06 22:54:56 +0400
commitcd587096c0e2b85a67e77721a753679bac89b394 (patch)
tree22ae2292f85cb8d36530535bc087bacdb8889158 /arch/arm
parentdc7745bd32272a614a6598c05db4510548ef18f2 (diff)
downloadlinux-cd587096c0e2b85a67e77721a753679bac89b394.tar.xz
mmc: omap_hsmmc: Enable HSPE bit for high speed cards
HSMMC IP on AM33xx need a special setting to handle High-speed cards. Other platforms like TI81xx, OMAP4 may need this as-well. This depends on the HSMMC IP timing closure done for the high speed cards. From AM335x TRM (SPRUH73F - 18.3.12 Output Signals Generation): The MMC/SD/SDIO output signals can be driven on either falling edge or rising edge depending on the SD_HCTL[2] HSPE bit. This feature allows to reach better timing performance, and thus to increase data transfer frequency. There are few pre-requisites for enabling the HSPE bit - Controller should support High-Speed-Enable Bit and - Controller should not be using DDR Mode and - Controller should advertise that it supports High Speed in capabilities register and - MMC/SD clock coming out of controller > 25MHz Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h1
1 files changed, 1 insertions, 0 deletions
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 8b4e4f2da2f5..346af5b490be 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -126,6 +126,7 @@ struct omap_mmc_platform_data {
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
unsigned features;
int switch_pin; /* gpio (card detect) */