diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-17 01:52:38 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-17 01:52:38 +0300 |
commit | 399eb9b6cbf31ff6ef91a6930e2e94c703d74078 (patch) | |
tree | 60c26e51c167efdfec5ab5821111df9ea90cbf7f /arch/arm/mach-davinci | |
parent | 2b97c39514a6130f38b14227a36d9cd37e650a9d (diff) | |
parent | 3dc8dcb02fdba3370aec0696727e6adfe8033aa4 (diff) | |
download | linux-399eb9b6cbf31ff6ef91a6930e2e94c703d74078.tar.xz |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r-- | arch/arm/mach-davinci/board-da850-evm.c | 90 |
1 files changed, 66 insertions, 24 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 0628e7d7dcf3..5b3549f1236c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -36,6 +36,7 @@ #include <linux/platform_data/ti-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/uio_pruss.h> +#include <linux/property.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> #include <linux/regulator/fixed.h> @@ -802,37 +803,79 @@ static const short da850_evm_mmcsd0_pins[] __initconst = { -1 }; -static void da850_panel_power_ctrl(int val) -{ - /* lcd backlight */ - gpio_set_value(DA850_LCD_BL_PIN, val); +static struct property_entry da850_lcd_backlight_props[] = { + PROPERTY_ENTRY_BOOL("default-on"), + { } +}; - /* lcd power */ - gpio_set_value(DA850_LCD_PWR_PIN, val); -} +static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = { + .dev_id = "gpio-backlight", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0), + { } + }, +}; + +static const struct platform_device_info da850_lcd_backlight_info = { + .name = "gpio-backlight", + .id = PLATFORM_DEVID_NONE, + .properties = da850_lcd_backlight_props, +}; + +static struct regulator_consumer_supply da850_lcd_supplies[] = { + REGULATOR_SUPPLY("lcd", NULL), +}; + +static struct regulator_init_data da850_lcd_supply_data = { + .consumer_supplies = da850_lcd_supplies, + .num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config da850_lcd_supply = { + .supply_name = "lcd", + .microvolts = 33000000, + .init_data = &da850_lcd_supply_data, +}; + +static struct platform_device da850_lcd_supply_device = { + .name = "reg-fixed-voltage", + .id = 1, /* Dummy fixed regulator is 0 */ + .dev = { + .platform_data = &da850_lcd_supply, + }, +}; + +static struct gpiod_lookup_table da850_lcd_supply_gpio_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0), + { } + }, +}; + +static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = { + &da850_lcd_backlight_gpio_table, + &da850_lcd_supply_gpio_table, +}; static int da850_lcd_hw_init(void) { + struct platform_device *backlight; int status; - status = gpio_request(DA850_LCD_BL_PIN, "lcd bl"); - if (status < 0) - return status; - - status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr"); - if (status < 0) { - gpio_free(DA850_LCD_BL_PIN); - return status; - } + gpiod_add_lookup_tables(da850_lcd_gpio_lookups, + ARRAY_SIZE(da850_lcd_gpio_lookups)); - gpio_direction_output(DA850_LCD_BL_PIN, 0); - gpio_direction_output(DA850_LCD_PWR_PIN, 0); + backlight = platform_device_register_full(&da850_lcd_backlight_info); + if (IS_ERR(backlight)) + return PTR_ERR(backlight); - /* Switch off panel power and backlight */ - da850_panel_power_ctrl(0); - - /* Switch on panel power and backlight */ - da850_panel_power_ctrl(1); + status = platform_device_register(&da850_lcd_supply_device); + if (status) + return status; return 0; } @@ -1443,7 +1486,6 @@ static __init void da850_evm_init(void) if (ret) pr_warn("%s: LCD initialization failed: %d\n", __func__, ret); - sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl, ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata); if (ret) pr_warn("%s: LCDC registration failed: %d\n", __func__, ret); |