Merge tag 'gemini-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

DTS updates for the Gemini:
- Set righ flashes on DNS-313
- Activate ATA1 on NAS4220B
- Set right harddisk triggers on the D-Link devices
- Fix all DTC warnings

* tag 'gemini-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Fix DTC warnings
  ARM: dts: Add second ATA to NAS4220B
  ARM: dts: Fix bootargs for Gemini D-Link devices
  ARM: dts: Fix the DNS-313 flash compatible
  ARM: dts: Set DNS-685 LEDs to use better triggers
  ARM: dtd: Set DNS-313 LEDs to use better triggers
  ARM: dts: gemini: Fix "debounce-interval" property misspelling

Signed-off-by: Olof Johansson <olof@lixom.net>

8 files changed, 56 insertions, 58 deletions

diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cadde92bc6b5..fb5c954ab95a 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -13,22 +13,22 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory {
+	memory@0 {
 		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
 
 	chosen {
-		stdout-path = "uart0:115200n8";
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:19200n8";
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+
 		button-esc {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_ESC>;
 			label = "reset";
@@ -36,7 +36,7 @@
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 		button-eject {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
 			label = "unmount";
@@ -98,7 +98,7 @@
 		/*
 		 * These two LEDs are on the side of the device.
 		 * For electrical reasons, both LEDs cannot be active
-		 * at the same time so only blue or orange can on at
+		 * at the same time so only blue or orange can be on at
 		 * one time. Enabling both makes the LED go dark.
 		 * The LEDs both sit inside the unmount button and the
 		 * label on the case says "unmount".
@@ -108,12 +108,14 @@
 			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
 			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			linux,default-trigger = "disk-read";
 		};
 		led-orange-hd {
 			label = "dir685:orange:HD";
 			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			linux,default-trigger = "disk-write";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 403364a7aab9..d1329322b968 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -15,7 +15,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory {
+	memory@0 {
 		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
 		device_type = "memory";
 		reg = <0x00000000 0x4000000>;
@@ -26,15 +26,15 @@
 	};
 
 	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
 		stdout-path = "uart0:19200n8";
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+
 		button-esc {
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_ESC>;
 			label = "reset";
@@ -59,14 +59,13 @@
 			label = "dns313:green:disk";
 			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "ide-disk";
-			/* Ideally should activate while reading */
+			linux,default-trigger = "disk-read";
 		};
 		led-disk-red {
 			label = "dns313:red:disk";
 			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			/* Ideally should activate while writing */
+			linux,default-trigger = "disk-write";
 		};
 	};
 
@@ -158,8 +157,12 @@
 
 	soc {
 		flash@30000000 {
+			/*
+			 * This is a Eon EN29LV400AB 512 KiB flash with
+			 * three partitions.
+			 */
+			compatible = "cortina,gemini-flash", "jedec-flash";
 			status = "okay";
-			/* 512KB of flash */
 			reg = <0x30000000 0x00080000>;
 
 			/*
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 4785fbcc41ed..963ea890c87f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -14,7 +14,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory { /* 128 MB */
+	memory@0 { /* 128 MB */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
@@ -26,19 +26,17 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@29 {
-			debounce_interval = <50>;
+		button-setup {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "Backup button";
 			/* Conflict with TVC */
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 		};
-		button@31 {
-			debounce_interval = <50>;
+		button-restart {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_RESTART>;
 			label = "Softreset button";
@@ -49,13 +47,13 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@28 {
+		led-orange-hdd {
 			label = "nas4220b:orange:hdd";
 			/* Conflict with TVC */
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		led@30 {
+		led-green-os {
 			label = "nas4220b:green:os";
 			/* Conflict with TVC */
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
@@ -202,5 +200,9 @@
 		ata@63000000 {
 			status = "okay";
 		};
+
+		ata@63400000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 15f20178642c..eb4f0bf074da 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -14,7 +14,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory { /* 128 MB */
+	memory@0 { /* 128 MB */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
@@ -26,11 +26,9 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@28 {
-			debounce_interval = <50>;
+		button-setup {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "Reset to defaults";
@@ -41,14 +39,14 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@7 {
+		led-gsm {
 			/* FIXME: add the LED color */
 			label = "rut1xx::gsm";
 			/* Conflict with ICE */
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		led@31 {
+		led-power {
 			/* FIXME: add the LED color */
 			label = "rut1xx::power";
 			/* Conflict with NAND CE0 */
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 63c02ca9513c..e5cf9d1a98cd 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -14,7 +14,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory { /* 128 MB */
+	memory@0 { /* 128 MB */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
@@ -26,11 +26,9 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@18 {
-			debounce_interval = <50>;
+		button-setup {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "factory reset";
@@ -41,14 +39,14 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@20 {
+		led-green-info {
 			label = "sq201:green:info";
 			/* Conflict with parallel flash */
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
-		led@31 {
+		led-green-usb {
 			label = "sq201:green:usb";
 			/* Conflict with parallel and NAND flash */
 			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index b4ec9ad85d72..29af86cd10f7 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -14,7 +14,8 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory { /* 128 MB */
+	memory@0 {
+		/* 128 MB */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
@@ -26,11 +27,9 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@5 {
-			debounce_interval = <50>;
+		button-setup {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "reset";
@@ -42,25 +41,25 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@1 {
+		led-red-l3 {
 			label = "wbd111:red:L3";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@2 {
+		led-green-l4 {
 			label = "wbd111:green:L4";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@3 {
+		led-red-l4 {
 			label = "wbd111:red:L4";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@5 {
+		led-greeb-l3 {
 			label = "wbd111:green:L3";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 6d25bcc046e7..24e6ae3616f7 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -14,7 +14,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	memory { /* 128 MB */
+	memory@0 { /* 128 MB */
 		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
@@ -26,11 +26,9 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@5 {
-			debounce_interval = <50>;
+		button-setup {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "reset";
@@ -42,25 +40,25 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@1 {
+		led-red-l3 {
 			label = "wbd111:red:L3";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@2 {
+		led-green-l4 {
 			label = "wbd111:green:L4";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@3 {
+		led-red-l4 {
 			label = "wbd111:red:L4";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		led@5 {
+		led-green-l3 {
 			label = "wbd111:green:L3";
 			/* Conflict with TVC and extended parallel flash */
 			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 0568baca500a..eb752e9495de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -3,8 +3,6 @@
  * Device Tree file for Cortina systems Gemini SoC
  */
 
-/include/ "skeleton.dtsi"
-
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/cortina,gemini-clock.h>
 #include <dt-bindings/reset/cortina,gemini-reset.h>