Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d031773169df2 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...

1 files changed, 0 insertions, 47 deletions

diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 86d532916d56..2e1a75348908 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -107,53 +107,6 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
 };
 
 &mdio {