ARM: dts: warp: Add initial WaRP Board support

The WaRP Board is a Wearable Reference Plaform. The board features:

 - Freescale i.MX6 SoloLite processor with 512MB of RAM
 - Freescale FXOS8700CQ 6-axis Xtrinsic sensor
 - Freescale Kinetis KL16 MCU
 - Freescale Xtrinsic MMA955xL intelligent motion sensing platform

The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.

For more information about the project, visit:

 http://www.warpboard.org/

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 190 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
new file mode 100644
index 000000000000..904efc48b096
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sl.dtsi"
+
+/ {
+	model = "WaRP Board";
+	compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+
+		reg_1p8v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6sl-warp {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+			>;
+		};
+	};
+};