Merge tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...

1 files changed, 413 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/broadcom/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
new file mode 100644
index 000000000000..b271a9bf06a9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
+
+#include <dt-bindings/clock/bcm281xx.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM11351 SoC";
+	compatible = "brcm,bcm11351";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@3404c000 {
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uartb: serial@3e000000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e000000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb2: serial@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e001000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb3: serial@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uartb4: serial@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e003000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	L2: l2-cache@3ff20000 {
+		compatible = "brcm,bcm11351-a2-pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: mmc@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x10000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: mmc@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x10000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: mmc@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: mmc@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x10000>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	pinctrl@35004800 {
+		compatible = "brcm,bcm11351-pinctrl";
+		reg = <0x35004800 0x430>;
+	};
+
+	bsc1: i2c@3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	bsc2: i2c@3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	bsc3: i2c@3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	pmu_bsc: i2c@3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu@34000000 {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+		};
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_cx40_clk: ref_cx40 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};