Merge tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have a new GPIO multiplexer driver, bunch of driver updates and
  refactoring in the core GPIO library.

  GPIO core:
   - teach gpiolib to work with software nodes for HW description
   - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
     the number of GPIOS since the allocation became entirely dynamic
   - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
     controller, Freescale PCIe and Ethernet controller, Himax LCDs and
     Mediatek mt2701
   - refactor OF quirk code
   - some general refactoring of the OF and ACPI code, adding new
     helpers, minor tweaks and fixes, making fwnode usage consistent
     etc.

  GPIO uAPI:
   - fix an issue where the user-space can trigger a NULL-pointer
     dereference in the kernel by opening a device file, forcing a
     driver unbind and then calling one of the syscalls on the
     associated file descriptor

  New drivers:
   - add gpio-latch: a new GPIO multiplexer based on latches connected
     to other GPIOs

  Driver updates:
   - convert i2c GPIO expanders to using .probe_new()
   - drop the gpio-sta2x11 driver
   - factor out common code for the ACCES IDIO-16 family of controllers
     and use this new library wherever applicable in drivers
   - add DT support to gpio-hisi
   - allow building gpio-davinci as a module and increase its maxItems
     property
   - add support for a new model to gpio-pca9570
   - other minor changes to various drivers"

* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
  gpio: sim: set a limit on the number of GPIOs
  gpiolib: protect the GPIO device against being dropped while in use by user-space
  gpiolib: cdev: fix NULL-pointer dereferences
  gpiolib: Provide to_gpio_device() helper
  gpiolib: Unify access to the device properties
  gpio: Do not include <linux/kernel.h> when not really needed.
  gpio: pcf857x: Convert to i2c's .probe_new()
  gpio: pca953x: Convert to i2c's .probe_new()
  gpio: max732x: Convert to i2c's .probe_new()
  dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
  gpiolib: ensure that fwnode is properly set
  gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
  gpiolib: of: Use correct fwnode for DT-probed chips
  gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
  gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
  gpiolib: add support for software nodes
  gpiolib: consolidate GPIO lookups
  gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
  gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
  gpiolib: acpi: change acpi_find_gpio() to accept firmware node
  ...

5 files changed, 152 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
index f32e09ef937c..10e56cf306db 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
@@ -35,7 +35,7 @@ properties:
   gpio-line-names:
     description: strings describing the names of each gpio line.
     minItems: 1
-    maxItems: 100
+    maxItems: 144
 
   "#gpio-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
new file mode 100644
index 000000000000..1ed82a2cebda
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  This binding describes a GPIO multiplexer based on latches connected to
+  other GPIOs, like this:
+
+  CLK0 ----------------------.        ,--------.
+  CLK1 -------------------.  `--------|>    #0 |
+                          |           |        |
+  OUT0 ----------------+--|-----------|D0    Q0|-----|<
+  OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+  OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+  OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+  OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+  OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+  OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+  OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+         | | | | | | | |  |           `--------'
+         | | | | | | | |  |
+         | | | | | | | |  |           ,--------.
+         | | | | | | | |  `-----------|>    #1 |
+         | | | | | | | |              |        |
+         | | | | | | | `--------------|D0    Q0|-----|<
+         | | | | | | `----------------|D1    Q1|-----|<
+         | | | | | `------------------|D2    Q2|-----|<
+         | | | | `--------------------|D3    Q3|-----|<
+         | | | `----------------------|D4    Q4|-----|<
+         | | `------------------------|D5    Q5|-----|<
+         | `--------------------------|D6    Q6|-----|<
+         `----------------------------|D7    Q7|-----|<
+                                      `--------'
+
+  The number of clk-gpios and latched-gpios is not fixed. The actual number
+  of number of latches and the number of inputs per latch is derived from
+  the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+  compatible:
+    const: gpio-latch
+  "#gpio-cells":
+    const: 2
+
+  clk-gpios:
+    description: Array of GPIOs to be used to clock a latch
+
+  latched-gpios:
+    description: Array of GPIOs to be used as inputs per latch
+
+  setup-duration-ns:
+    description: Delay in nanoseconds to wait after the latch inputs have been
+      set up
+
+  clock-duration-ns:
+    description: Delay in nanoseconds to wait between clock output changes
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - clk-gpios
+  - latched-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-latch {
+        #gpio-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_di_do_leds>;
+        compatible = "gpio-latch";
+        gpio-controller;
+        setup-duration-ns = <100>;
+        clock-duration-ns = <100>;
+
+        clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+        latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+                       <&gpio3 23 0>, <&gpio3 24 0>,
+                       <&gpio3 25 0>, <&gpio3 26 0>,
+                       <&gpio3 27 0>, <&gpio3 28 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 1acaa0a3d35a..48bf414aa50e 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - dlg,slg7xl45106
       - nxp,pca9570
       - nxp,pca9571
 
diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 000000000000..735d97d645a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+  - Jay Fang <f.fangjian@huawei.com>
+
+description:
+  The HiSilicon common GPIO controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@840d0000 {
+      compatible = "hisilicon,ascend910-gpio";
+      reg = <0x840d0000 0x1000>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/driver-api/gpio/legacy.rst b/Documentation/driver-api/gpio/legacy.rst
index 9b12eeb89170..e17910cc3271 100644
--- a/Documentation/driver-api/gpio/legacy.rst
+++ b/Documentation/driver-api/gpio/legacy.rst
@@ -558,11 +558,6 @@ Platform Support
 To force-enable this framework, a platform's Kconfig will "select" GPIOLIB,
 else it is up to the user to configure support for GPIO.
 
-It may also provide a custom value for ARCH_NR_GPIOS, so that it better
-reflects the number of GPIOs in actual use on that platform, without
-wasting static table space.  (It should count both built-in/SoC GPIOs and
-also ones on GPIO expanders.
-
 If neither of these options are selected, the platform does not support
 GPIOs through GPIO-lib and the code cannot be enabled by the user.