Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a calm development cycle. There were an ALSA core extension for
  subformat PCM bits and a few ASoC core changes to support N:M
  mappings, while the most of remaining changes are driver-specific.

  Core:
   - API extensions for properly limiting PCM format bits via subformat
   - Enhanced support for N:M CPU:CODEC mappings in the core and in
     audio-graph-card2

  ASoC:
   - Lots of SOF updates: fallback support to older IPC versions,
     notification on control changes with IPC4. Also supports for ACPI
     parse for the ES83xx driver that reduces quirks.
   - Device tree support for describing parts of the card which can be
     active over suspend (for very low power playback or wake word use
     cases)
   - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
     SM8250, SM8550, SM8650 and X1E80100
   - Drop of Freescale MPC8610 code that is no longer supported

  HD-audio:
   - More CS35L41 codec extensions for Dell, HP and Lenovo models
   - TAS2781 codec extensions for Lenovo and co
   - New PCM subformat supports

  Others:
   - More enhancement for Scarlett2 USB mixer support
   - Various kselftest fixes"

* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
  kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
  ALSA: hda/tas2781: annotate calibration data endianness
  ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
  ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
  ALSA: ac97: fix build regression
  ALSA: hda: cs35l41: Support more HP models without _DSD
  ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
  ALSA: hda/tas2781: add TAS2563 support for 14ARB7
  ALSA: hda/tas2781: add configurable global i2c address
  ALSA: hda/tas2781: add ptrs to calibration functions
  ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
  ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
  ALSA: hda/tas2781: configure the amp after firmware load
  ALSA: mark all struct bus_type as const
  ASoC: pxa: sspa: Don't select SND_ARM
  ASoC: rt5663: cancel the work when system suspends
  ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
  ...

24 files changed, 318 insertions, 138 deletions

diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
index a844b63f3930..c388cda56011 100644
--- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
@@ -39,7 +39,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index 60b5e3fd1115..b13c08de505e 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -19,6 +19,12 @@ definitions:
     properties:
       mclk-fs:
         $ref: simple-card.yaml#/definitions/mclk-fs
+      playback-only:
+        description: port connection used only for playback
+        $ref: /schemas/types.yaml#/definitions/flag
+      capture-only:
+        description: port connection used only for capture
+        $ref: /schemas/types.yaml#/definitions/flag
 
   endpoint-base:
     allOf:
diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt
deleted file mode 100644
index 33fbf058c997..000000000000
--- a/Documentation/devicetree/bindings/sound/es8328.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Everest ES8328 audio CODEC
-
-This device supports both I2C and SPI.
-
-Required properties:
-
-  - compatible  : Should be "everest,es8328" or "everest,es8388"
-  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
-  - AVDD-supply : Regulator providing analog supply voltage 3.3V
-  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
-  - IPVDD-supply : Regulator providing analog output voltage 3.3V
-  - clocks : A 22.5792 or 11.2896 MHz clock
-  - reg : the I2C address of the device for I2C, the chip select number for SPI
-
-Pins on the device (for linking into audio routes):
-
-  * LOUT1
-  * LOUT2
-  * ROUT1
-  * ROUT2
-  * LINPUT1
-  * RINPUT1
-  * LINPUT2
-  * RINPUT2
-  * Mic Bias
-
-
-Example:
-
-codec: es8328@11 {
-	compatible = "everest,es8328";
-	DVDD-supply = <&reg_3p3v>;
-	AVDD-supply = <&reg_3p3v>;
-	PVDD-supply = <&reg_3p3v>;
-	HPVDD-supply = <&reg_3p3v>;
-	clocks = <&clks 169>;
-	reg = <0x11>;
-};
diff --git a/Documentation/devicetree/bindings/sound/everest,es8328.yaml b/Documentation/devicetree/bindings/sound/everest,es8328.yaml
new file mode 100644
index 000000000000..a0f4670fa38c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8328.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8328 audio CODEC
+
+description:
+  Everest Audio Codec, which can be connected via I2C or SPI.
+  Pins on the device (for linking into audio routes) are
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    enum:
+      - everest,es8328
+      - everest,es8388
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: A 22.5792 or 11.2896 MHz clock
+
+  DVDD-supply:
+    description: Regulator providing digital core supply voltage 1.8 - 3.6V
+
+  AVDD-supply:
+    description: Regulator providing analog supply voltage 3.3V
+
+  PVDD-supply:
+    description: Regulator providing digital IO supply voltage 1.8 - 3.6V
+
+  HPVDD-supply:
+    description: Regulator providing analog output voltage 3.3V
+
+required:
+  - compatible
+  - clocks
+  - DVDD-supply
+  - AVDD-supply
+  - PVDD-supply
+  - HPVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8328: codec@11 {
+        compatible = "everest,es8328";
+        reg = <0x11>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+        HPVDD-supply = <&reg_3p3v>;
+        PVDD-supply = <&reg_3p3v>;
+        clocks = <&clks 169>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
deleted file mode 100644
index d66284b8bef2..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-fsl,mqs audio CODEC
-
-Required properties:
-  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
-  - clocks : A list of phandles + clock-specifiers, one for each entry in
-	     clock-names
-  - clock-names : "mclk" - must required.
-		  "core" - required if compatible is "fsl,imx8qm-mqs", it
-		           is for register access.
-  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
-	  Required if compatible is "fsl,imx6sx-mqs".
-
-Required if compatible is "fsl,imx8qm-mqs":
-  - power-domains: A phandle of PM domain provider node.
-  - reg: Offset and length of the register set for the device.
-
-Example:
-
-mqs: mqs {
-	compatible = "fsl,imx6sx-mqs";
-	gpr = <&gpr>;
-	clocks = <&clks IMX6SX_CLK_SAI1>;
-	clock-names = "mclk";
-	status = "disabled";
-};
-
-mqs: mqs@59850000 {
-	compatible = "fsl,imx8qm-mqs";
-	reg = <0x59850000 0x10000>;
-	clocks = <&clk IMX8QM_AUD_MQS_IPG>,
-		 <&clk IMX8QM_AUD_MQS_HMCLK>;
-	clock-names = "core", "mclk";
-	power-domains = <&pd_mqs0>;
-	status = "disabled";
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.yaml b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
new file mode 100644
index 000000000000..8b33353a80ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,mqs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Medium Quality Sound (MQS)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+  - Chancel Liu <chancel.liu@nxp.com>
+
+description: |
+  Medium quality sound (MQS) is used to generate medium quality audio
+  via a standard GPIO in the pinmux, allowing the user to connect
+  stereo speakers or headphones to a power amplifier without an
+  additional DAC chip.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mqs
+      - fsl,imx8qm-mqs
+      - fsl,imx8qxp-mqs
+      - fsl,imx93-mqs
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-mqs
+              - fsl,imx8qxp-mqs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+            - description: Clock for register access
+        clock-names:
+          items:
+            - const: mclk
+            - const: core
+      required:
+        - reg
+        - power-domains
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Master clock
+        clock-names:
+          items:
+            - const: mclk
+      required:
+        - gpr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    mqs0: mqs {
+        compatible = "fsl,imx6sx-mqs";
+        gpr = <&gpr>;
+        clocks = <&clks IMX6SX_CLK_SAI1>;
+        clock-names = "mclk";
+    };
+
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mqs1: mqs@59850000 {
+        compatible = "fsl,imx8qm-mqs";
+        reg = <0x59850000 0x10000>;
+        clocks = <&mqs0_lpcg 0>, <&mqs0_lpcg 1>;
+        clock-names = "mclk", "core";
+        power-domains = <&pd IMX_SC_R_MQS_0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
index 799b362ba498..0eb0c1ba8710 100644
--- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -38,7 +38,10 @@ properties:
       - const: txfifo
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: WAKEUPMIX Audio XCVR Interrupt 1
+      - description: WAKEUPMIX Audio XCVR Interrupt 2
+    minItems: 1
 
   clocks:
     items:
@@ -78,6 +81,23 @@ required:
   - dma-names
   - resets
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-xcvr
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 4c8c95057ef7..f94ad0715e32 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - mediatek,mt8188-es8326
       - mediatek,mt8188-mt6359-evb
       - mediatek,mt8188-nau8825
       - mediatek,mt8188-rt5682s
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
index 3e54abd4ca74..054b53954ac3 100644
--- a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -89,6 +89,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 3072000
 
+  nuvoton,dmic-slew-rate:
+    description: The range 0 to 7 represents the speed of DMIC slew rate.
+        The lowest value 0 means the slowest rate and the highest value
+        7 means the fastest rate.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
   nuvoton,left-input-single-end:
     description: Enable left input with single-ended settings if set.
         For the headset mic application, the single-ended control is
@@ -127,6 +135,7 @@ examples:
             nuvoton,jack-insert-debounce = <7>;
             nuvoton,jack-eject-debounce = <0>;
             nuvoton,dmic-clk-threshold = <3072000>;
+            nuvoton,dmic-slew-rate = <0>;
             #sound-dai-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
index ec4b0ac8ad68..b8540b30741e 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-rx-macro
-      - qcom,sm8250-lpass-rx-macro
-      - qcom,sm8450-lpass-rx-macro
-      - qcom,sm8550-lpass-rx-macro
-      - qcom,sc8280xp-lpass-rx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-rx-macro
+          - qcom,sm8250-lpass-rx-macro
+          - qcom,sm8450-lpass-rx-macro
+          - qcom,sm8550-lpass-rx-macro
+          - qcom,sc8280xp-lpass-rx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-rx-macro
+              - qcom,x1e80100-lpass-rx-macro
+          - const: qcom,sm8550-lpass-rx-macro
 
   reg:
     maxItems: 1
@@ -96,8 +102,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-rx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-rx-macro
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
index 962701e9eb42..3e2ae16c6aba 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@@ -11,13 +11,19 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-tx-macro
-      - qcom,sm6115-lpass-tx-macro
-      - qcom,sm8250-lpass-tx-macro
-      - qcom,sm8450-lpass-tx-macro
-      - qcom,sm8550-lpass-tx-macro
-      - qcom,sc8280xp-lpass-tx-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-tx-macro
+          - qcom,sm6115-lpass-tx-macro
+          - qcom,sm8250-lpass-tx-macro
+          - qcom,sm8450-lpass-tx-macro
+          - qcom,sm8550-lpass-tx-macro
+          - qcom,sc8280xp-lpass-tx-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-tx-macro
+              - qcom,x1e80100-lpass-tx-macro
+          - const: qcom,sm8550-lpass-tx-macro
 
   reg:
     maxItems: 1
@@ -118,8 +124,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-tx-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-tx-macro
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
index 4a56108c444b..6b483fa3c428 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-va-macro
-      - qcom,sm8250-lpass-va-macro
-      - qcom,sm8450-lpass-va-macro
-      - qcom,sm8550-lpass-va-macro
-      - qcom,sc8280xp-lpass-va-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-va-macro
+          - qcom,sm8250-lpass-va-macro
+          - qcom,sm8450-lpass-va-macro
+          - qcom,sm8550-lpass-va-macro
+          - qcom,sc8280xp-lpass-va-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-va-macro
+              - qcom,x1e80100-lpass-va-macro
+          - const: qcom,sm8550-lpass-va-macro
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
index eea7609d1b33..06b5f7be3608 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7280-lpass-wsa-macro
-      - qcom,sm8250-lpass-wsa-macro
-      - qcom,sm8450-lpass-wsa-macro
-      - qcom,sm8550-lpass-wsa-macro
-      - qcom,sc8280xp-lpass-wsa-macro
+    oneOf:
+      - enum:
+          - qcom,sc7280-lpass-wsa-macro
+          - qcom,sm8250-lpass-wsa-macro
+          - qcom,sm8450-lpass-wsa-macro
+          - qcom,sm8550-lpass-wsa-macro
+          - qcom,sc8280xp-lpass-wsa-macro
+      - items:
+          - enum:
+              - qcom,sm8650-lpass-wsa-macro
+              - qcom,x1e80100-lpass-wsa-macro
+          - const: qcom,sm8550-lpass-wsa-macro
 
   reg:
     maxItems: 1
@@ -94,8 +100,9 @@ allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sm8550-lpass-wsa-macro
+          contains:
+            enum:
+              - qcom,sm8550-lpass-wsa-macro
     then:
       properties:
         clocks:
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index e082a4fe095d..6f419747273e 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -21,6 +21,11 @@ properties:
               - lenovo,yoga-c630-sndcard
               - qcom,db845c-sndcard
           - const: qcom,sdm845-sndcard
+      - items:
+          - enum:
+              - qcom,sm8550-sndcard
+              - qcom,sm8650-sndcard
+          - const: qcom,sm8450-sndcard
       - enum:
           - qcom,apq8016-sbc-sndcard
           - qcom,msm8916-qdsp6-sndcard
@@ -30,6 +35,7 @@ properties:
           - qcom,sdm845-sndcard
           - qcom,sm8250-sndcard
           - qcom,sm8450-sndcard
+          - qcom,x1e80100-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 4df59f3b7b01..beb0ff0245b0 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -201,9 +201,9 @@ examples:
   - |
     codec@1,0{
         compatible = "slim217,250";
-        reg  = <1 0>;
+        reg = <1 0>;
         reset-gpios = <&tlmm 64 0>;
-        slim-ifc-dev  = <&wcd9340_ifd>;
+        slim-ifc-dev = <&wcd9340_ifd>;
         #sound-dai-cells = <1>;
         interrupt-parent = <&tlmm>;
         interrupts = <54 4>;
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
index b430dd3e1841..7b31bf93f1a1 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@@ -51,7 +51,7 @@ examples:
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -62,7 +62,7 @@ examples:
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index 018565793a3e..adbfa67f88ed 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -137,7 +137,7 @@ examples:
         reg = <0x03210000 0x2000>;
         wcd938x_rx: codec@0,4 {
             compatible = "sdw20217010d00";
-            reg  = <0 4>;
+            reg = <0 4>;
             qcom,rx-port-mapping = <1 2 3 4 5>;
         };
     };
@@ -148,7 +148,7 @@ examples:
         reg = <0x03230000 0x2000>;
         wcd938x_tx: codec@0,3 {
             compatible = "sdw20217010d00";
-            reg  = <0 3>;
+            reg = <0 3>;
             qcom,tx-port-mapping = <2 3 4 5>;
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
index ba572a7f4f3c..8e462cdf0018 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -52,7 +52,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller@3250000 {
+    soundwire@3250000 {
         #address-cells = <2>;
         #size-cells = <0>;
         reg = <0x3250000 0x2000>;
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
index e6723c9e312a..d717017b0fdb 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -48,7 +48,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    soundwire-controller {
+    soundwire {
         #address-cells = <2>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 13a5a0a10fe6..0d7a6b576d88 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -9,20 +9,6 @@ title: Renesas R-Car Sound Driver
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
-definitions:
-  port-def:
-    $ref: audio-graph-port.yaml#/definitions/port-base
-    unevaluatedProperties: false
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        $ref: audio-graph-port.yaml#/definitions/endpoint-base
-        properties:
-          playback:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-          capture:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-        unevaluatedProperties: false
-
 properties:
 
   compatible:
@@ -125,7 +111,17 @@ properties:
 
   # ports is below
   port:
-    $ref: "#/definitions/port-def"
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
 
   rcar_sound,dvc:
     description: DVC subnode.
@@ -269,7 +265,7 @@ patternProperties:
     unevaluatedProperties: false
     patternProperties:
       '^port(@[0-9a-f]+)?$':
-        $ref: "#/definitions/port-def"
+        $ref: "#/properties/port"
 
 required:
   - compatible
@@ -501,19 +497,19 @@ examples:
         rcar_sound,dai {
             dai0 {
                 playback = <&ssi5>, <&src5>;
-                capture  = <&ssi6>;
+                capture = <&ssi6>;
             };
             dai1 {
                 playback = <&ssi3>;
             };
             dai2 {
-                capture  = <&ssi4>;
+                capture = <&ssi4>;
             };
             dai3 {
                 playback = <&ssi7>;
             };
             dai4 {
-                capture  = <&ssi8>;
+                capture = <&ssi8>;
             };
         };
 
@@ -527,7 +523,7 @@ examples:
                 frame-master = <&rsnd_endpoint0>;
 
                 playback = <&ssi0>, <&src0>, <&dvc0>;
-                capture  = <&ssi1>, <&src1>, <&dvc1>;
+                capture = <&ssi1>, <&src1>, <&dvc1>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
index 3b5ae45eee4a..8b9695f5decc 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@@ -16,7 +16,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g043-ssi  # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
           - renesas,r9a07g054-ssi  # RZ/V2L
       - const: renesas,rz-ssi
diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
index 3a941177f684..721950f65748 100644
--- a/Documentation/devicetree/bindings/sound/sound-card-common.yaml
+++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
@@ -17,6 +17,13 @@ properties:
       pair of strings, the first being the connection's sink, the second
       being the connection's source.
 
+  ignore-suspend-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of audio sound widgets which are marked ignoring system suspend.
+      Paths between these endpoints are still active over suspend of the main
+      application processor that the current operating system is running.
+
   model:
     $ref: /schemas/types.yaml#/definitions/string
     description: User specified audio sound card name
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
index a7cc9aa34468..4783e6dbb5c4 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@@ -90,7 +90,7 @@ examples:
         ldoin-supply = <&reg_3v3>;
         clocks = <&clks 201>;
         clock-names = "mclk";
-        aic32x4-gpio-func= <
+        aic32x4-gpio-func = <
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
           0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
diff --git a/Documentation/sound/soc/dapm.rst b/Documentation/sound/soc/dapm.rst
index 8e44107933ab..c3154ce6e1b2 100644
--- a/Documentation/sound/soc/dapm.rst
+++ b/Documentation/sound/soc/dapm.rst
@@ -234,7 +234,7 @@ corresponding soft power control. In this case it is necessary to create
 a virtual widget - a widget with no control bits e.g.
 ::
 
-  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 
 This can be used to merge to signal paths together in software.