Merge branch 'newsoc/axiado' into soc/newsoc

Support for the AX3000 SoC, from Harshit Shah <hshah@axiado.com>:

The AX3000 is a multi-core system-on-chip featuring four ARM Cortex-A53
cores, secure vault, hardware firewall, and AI acceleration engines. This
initial support enables basic bring-up of the SoC and evaluation platform
with CPU, timer, UART, and I3C functionality.

The series begins by adding the "axiado" vendor prefix and compatible
strings for the SoC and board. It then introduces the device tree files
and minimal ARCH_AXIADO platform support in arm64.

* newsoc/axiado:
  MAINTAINERS: Add entry for Axiado
  arm64: defconfig: enable the Axiado family
  arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
  arm64: add Axiado SoC family
  dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
  dt-bindings: serial: cdns: add Axiado AX3000 UART controller
  dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
  dt-bindings: gpio: cdns: convert to YAML
  dt-bindings: arm: axiado: add AX3000 EVK compatible strings
  dt-bindings: vendor-prefixes: Add Axiado Corporation

6 files changed, 119 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/arm/axiado.yaml b/Documentation/devicetree/bindings/arm/axiado.yaml
new file mode 100644
index 000000000000..bfabe7b32e65
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axiado.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axiado.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axiado Platforms
+
+maintainers:
+  - Harshit Shah <hshah@axiado.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AX3000 based boards
+        items:
+          - enum:
+              - axiado,ax3000-evk       # Axiado AX3000 Evaluation Board
+          - const: axiado,ax3000       # Axiado AX3000 SoC
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
deleted file mode 100644
index 706ef00f5c64..000000000000
--- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
-	* first cell is the GPIO number.
-	* second cell specifies the GPIO flags, as defined in
-		<dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
-		and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
-	the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
-	defined, interrupts, interrupt-parent and #interrupt-cells
-	are required.
-- interrupt-cells: should be 2.
-	* first cell is the GPIO number you want to use as an IRQ source.
-	* second cell specifies the IRQ type, as defined in
-		<dt-bindings/interrupt-controller/irq.h>.
-		Currently only level sensitive IRQs are supported.
-
-
-Example:
-	gpio0: gpio-controller@fd060000 {
-		compatible = "cdns,gpio-r1p02";
-		reg =<0xfd060000 0x1000>;
-
-		clocks = <&gpio_clk>;
-
-		interrupt-parent = <&gic>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
new file mode 100644
index 000000000000..a84d60b39459
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cdns,gpio-r1p02
+      - items:
+          - enum:
+              - axiado,ax3000-gpio
+          - const: cdns,gpio-r1p02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number.
+      - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+        only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number used as IRQ.
+      - Second cell is the trigger type, as defined in
+        <dt-bindings/interrupt-controller/irq.h>.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required: [interrupt-controller]
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio-controller@fd060000 {
+        compatible = "cdns,gpio-r1p02";
+        reg = <0xfd060000 0x1000>;
+        clocks = <&gpio_clk>;
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
index cad6d53d0e2e..6fa3078074d0 100644
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -14,7 +14,12 @@ allOf:
 
 properties:
   compatible:
-    const: cdns,i3c-master
+    oneOf:
+      - const: cdns,i3c-master
+      - items:
+          - enum:
+              - axiado,ax3000-i3c
+          - const: cdns,i3c-master
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index d7f047b0bf24..9d3e5c1d8502 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -16,9 +16,10 @@ properties:
         items:
           - const: xlnx,xuartps
           - const: cdns,uart-r1p8
-      - description: UART controller for Zynq Ultrascale+ MPSoC
-        items:
-          - const: xlnx,zynqmp-uart
+      - items:
+          - enum:
+              - axiado,ax3000-uart
+              - xlnx,zynqmp-uart
           - const: cdns,uart-r1p12
 
   reg:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f258c1f53b3c..a5a24619a29b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -200,6 +200,8 @@ patternProperties:
     description: Shanghai Awinic Technology Co., Ltd.
   "^axentia,.*":
     description: Axentia Technologies AB
+  "^axiado,.*":
+    description: Axiado Corporation
   "^axis,.*":
     description: Axis Communications AB
   "^azoteq,.*":