diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-31 05:36:19 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-08-31 05:36:19 +0300 |
| commit | 4a3b1007eeb26b2bb7ae4d734cc8577463325165 (patch) | |
| tree | dd284afac6ff146117202fcd7300953b40abd7af /Documentation/devicetree | |
| parent | bb511d4b25a75bd67c4db4dcb570b2ca3b42c926 (diff) | |
| parent | 82a65f0844852cec6a70ac05c7d8edb0586c851c (diff) | |
| download | linux-4a3b1007eeb26b2bb7ae4d734cc8577463325165.tar.xz | |
Merge tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
Diffstat (limited to 'Documentation/devicetree')
37 files changed, 928 insertions, 1031 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index f35b77920786..0ce6665df4a2 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -8,7 +8,7 @@ control module driver itself. See [2] for documentation about clock/clockdomain nodes. -[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml [2] Documentation/devicetree/bindings/clock/ti/* Required properties: diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt deleted file mode 100644 index 966514744df4..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Oxford Semiconductor OXNAS SoC GPIO Controller - -Please refer to gpio.txt for generic information regarding GPIO bindings. - -Required properties: - - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - - reg: Base address and length for the device. - - interrupts: The port interrupt shared by all pins. - - gpio-controller: Marks the port as GPIO controller. - - #gpio-cells: Two. The first cell is the pin number and - the second cell is used to specify the gpio polarity as defined in - defined in <dt-bindings/gpio/gpio.h>: - 0 = GPIO_ACTIVE_HIGH - 1 = GPIO_ACTIVE_LOW - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells: Two. The first cell is the GPIO number and second cell - is used to specify the trigger type as defined in - <dt-bindings/interrupt-controller/irq.h>: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the - gpio base and count, should be in the format of numeric-gpio-range as - specified in the gpio.txt file. - -Example: - -gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&pinctrl 0 0 32>; -}; - -keys { - ... - - button-esc { - label = "ESC"; - linux,code = <1>; - gpios = <&gpio0 12 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index 99080c9eaac3..4e7a456ea4cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - amlogic,c3-periphs-pinctrl - amlogic,meson-a1-periphs-pinctrl - amlogic,meson-s4-periphs-pinctrl @@ -36,6 +37,10 @@ patternProperties: - const: mux - const: gpio + gpio-line-names: + minItems: 62 # A1 + maxItems: 82 # S4 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml index a7b29ef0bab6..e707c222a07f 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml @@ -41,6 +41,13 @@ $defs: gpio-ranges: maxItems: 1 + patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 7c9c94ec5b7b..0942ea60c6cd 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -36,6 +36,9 @@ patternProperties: - const: ds - const: gpio + gpio-line-names: + maxItems: 15 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index 4bcb8b60420f..e3c8bde30559 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -38,6 +38,9 @@ patternProperties: - const: mux - const: ds + gpio-line-names: + maxItems: 85 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index 32d99c9b6afc..c1b03147e8ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -44,6 +44,10 @@ patternProperties: - const: pull - const: gpio + gpio-line-names: + minItems: 11 # GXL + maxItems: 16 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index d0441051f34a..4ec85b8248fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -45,6 +45,10 @@ patternProperties: - const: pull-enable - const: gpio + gpio-line-names: + minItems: 86 # AXG + maxItems: 120 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bef85c25cdef..37c0a74c7c01 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -25,30 +25,32 @@ properties: reg: maxItems: 2 -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -56,8 +58,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 14c391f16899..863da5d80826 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -37,32 +37,34 @@ properties: 0: compatible with "aspeed,ast2500-gfx", "syscon" 1: compatible with "aspeed,ast2500-lhc", "syscon" -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -71,8 +73,6 @@ required: - compatible - aspeed,external-nodes -additionalProperties: false - examples: - | #include <dt-bindings/clock/aspeed-clock.h> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 859a1889dc1e..612464aef98b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -23,65 +23,65 @@ properties: compatible: const: aspeed,ast2600-pinctrl -patternProperties: - '^.*$': - if: - type: object - then: - properties: - function: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] - - groups: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + + groups: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] + + pins: true + bias-disable: true allOf: - $ref: pinctrl.yaml# @@ -89,8 +89,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt deleted file mode 100644 index e047a198db38..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ /dev/null @@ -1,461 +0,0 @@ -Broadcom BCM281xx Pin Controller - -This is a pin controller for the Broadcom BCM281xx SoC family, which includes -BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. - -=== Pin Controller Node === - -Required Properties: - -- compatible: Must be "brcm,bcm11351-pinctrl" -- reg: Base address of the PAD Controller register block and the size - of the block. - -For example, the following is the bare minimum node: - - pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - }; - -As a pin controller device, in addition to the required properties, this node -should also contain the pin configuration nodes that client devices reference, -if any. - -=== Pin Configuration Node === - -Each pin configuration node is a sub-node of the pin controller node and is a -container of an arbitrary number of subnodes, called pin group nodes in this -document. - -Please refer to the pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the definition of a -"pin configuration node". - -=== Pin Group Node === - -A pin group node specifies the desired pin mux and/or pin configuration for an -arbitrary number of pins. The name of the pin group node is optional and not -used. - -A pin group node only affects the properties specified in the node, and has no -effect on any properties that are omitted. - -The pin group node accepts a subset of the generic pin config properties. For -details generic pin config properties, please refer to pinctrl-bindings.txt -and <include/linux/pinctrl/pinconfig-generic.h>. - -Each pin controlled by this pin controller belong to one of three types: -Standard, I2C, and HDMI. Each type accepts a different set of pin config -properties. A list of pins and their types is provided below. - -Required Properties (applicable to all pins): - -- pins: Multiple strings. Specifies the name(s) of one or more pins to - be configured by this node. - -Optional Properties (for standard pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. -- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. -- bias-pull-up: No arguments. Pull up on pin. -- bias-pull-down: No arguments. Pull down on pin. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) -- drive-strength: Integer. Drive strength in mA. Valid values are - 2, 4, 6, 8, 10, 12, 14, 16 mA. - -Optional Properties (for I2C pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 - pull-up resistors (1.2k, 1.8k, 2.7k) available - in parallel for I2C pins, so the valid values - are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Optional Properties (for HDMI pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- slew-rate: Integer. Controls slew rate. - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Example: -// pin controller node -pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - - // pin configuration node - dev_a_default: dev_a_active { - //group node defining 1 standard pin - grp_1 { - pins = "std_pin1"; - function = "alt1"; - input-schmitt-enable; - bias-disable; - slew-rate = <1>; - drive-strength = <4>; - }; - - // group node defining 2 I2C pins - grp_2 { - pins = "i2c_pin1", "i2c_pin2"; - function = "alt2"; - bias-pull-up = <720>; - input-enable; - }; - - // group node defining 2 HDMI pins - grp_3 { - pins = "hdmi_pin1", "hdmi_pin2"; - function = "alt3"; - slew-rate = <1>; - }; - - // other pin group nodes - ... - }; - - // other pin configuration nodes - ... -}; - -In the example above, "dev_a_active" is a pin configuration node with a number -of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in -the "pins" property. Thus, the remaining properties in the "grp_1" node applies -only to this pin, including the following settings: - - setting pinmux to "alt1" - - enabling schmitt-trigger (hystersis) mode - - disabling pin bias - - setting the slew-rate to 1 - - setting the drive strength to 4 mA -Note that neither "input-enable" nor "input-disable" was specified - the pinctrl -subsystem will therefore leave this property unchanged from whatever state it -was in before applying these changes. - -The "pins" property in the pin group node "grp_2" specifies two pins - -"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, -therefore, applies to both of these pins. The properties include: - - setting pinmux to "alt2" - - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors - in parallel) - - enabling both pins' input -"slew-rate" is not specified in this pin group node, so the slew-rate for these -pins are left as-is. - -Finally, "grp_3" defines two HDMI pins. The following properties are applied to -both pins: - - setting pinmux to "alt3" - - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps - Highspeed mode -The input is neither enabled or disabled, and is left untouched. - -=== Pin Names and Type === - -The following are valid pin names and their pin types: - - "adcsync", Standard - "bat_rm", Standard - "bsc1_scl", I2C - "bsc1_sda", I2C - "bsc2_scl", I2C - "bsc2_sda", I2C - "classgpwr", Standard - "clk_cx8", Standard - "clkout_0", Standard - "clkout_1", Standard - "clkout_2", Standard - "clkout_3", Standard - "clkreq_in_0", Standard - "clkreq_in_1", Standard - "cws_sys_req1", Standard - "cws_sys_req2", Standard - "cws_sys_req3", Standard - "digmic1_clk", Standard - "digmic1_dq", Standard - "digmic2_clk", Standard - "digmic2_dq", Standard - "gpen13", Standard - "gpen14", Standard - "gpen15", Standard - "gpio00", Standard - "gpio01", Standard - "gpio02", Standard - "gpio03", Standard - "gpio04", Standard - "gpio05", Standard - "gpio06", Standard - "gpio07", Standard - "gpio08", Standard - "gpio09", Standard - "gpio10", Standard - "gpio11", Standard - "gpio12", Standard - "gpio13", Standard - "gpio14", Standard - "gps_pablank", Standard - "gps_tmark", Standard - "hdmi_scl", HDMI - "hdmi_sda", HDMI - "ic_dm", Standard - "ic_dp", Standard - "kp_col_ip_0", Standard - "kp_col_ip_1", Standard - "kp_col_ip_2", Standard - "kp_col_ip_3", Standard - "kp_row_op_0", Standard - "kp_row_op_1", Standard - "kp_row_op_2", Standard - "kp_row_op_3", Standard - "lcd_b_0", Standard - "lcd_b_1", Standard - "lcd_b_2", Standard - "lcd_b_3", Standard - "lcd_b_4", Standard - "lcd_b_5", Standard - "lcd_b_6", Standard - "lcd_b_7", Standard - "lcd_g_0", Standard - "lcd_g_1", Standard - "lcd_g_2", Standard - "lcd_g_3", Standard - "lcd_g_4", Standard - "lcd_g_5", Standard - "lcd_g_6", Standard - "lcd_g_7", Standard - "lcd_hsync", Standard - "lcd_oe", Standard - "lcd_pclk", Standard - "lcd_r_0", Standard - "lcd_r_1", Standard - "lcd_r_2", Standard - "lcd_r_3", Standard - "lcd_r_4", Standard - "lcd_r_5", Standard - "lcd_r_6", Standard - "lcd_r_7", Standard - "lcd_vsync", Standard - "mdmgpio0", Standard - "mdmgpio1", Standard - "mdmgpio2", Standard - "mdmgpio3", Standard - "mdmgpio4", Standard - "mdmgpio5", Standard - "mdmgpio6", Standard - "mdmgpio7", Standard - "mdmgpio8", Standard - "mphi_data_0", Standard - "mphi_data_1", Standard - "mphi_data_2", Standard - "mphi_data_3", Standard - "mphi_data_4", Standard - "mphi_data_5", Standard - "mphi_data_6", Standard - "mphi_data_7", Standard - "mphi_data_8", Standard - "mphi_data_9", Standard - "mphi_data_10", Standard - "mphi_data_11", Standard - "mphi_data_12", Standard - "mphi_data_13", Standard - "mphi_data_14", Standard - "mphi_data_15", Standard - "mphi_ha0", Standard - "mphi_hat0", Standard - "mphi_hat1", Standard - "mphi_hce0_n", Standard - "mphi_hce1_n", Standard - "mphi_hrd_n", Standard - "mphi_hwr_n", Standard - "mphi_run0", Standard - "mphi_run1", Standard - "mtx_scan_clk", Standard - "mtx_scan_data", Standard - "nand_ad_0", Standard - "nand_ad_1", Standard - "nand_ad_2", Standard - "nand_ad_3", Standard - "nand_ad_4", Standard - "nand_ad_5", Standard - "nand_ad_6", Standard - "nand_ad_7", Standard - "nand_ale", Standard - "nand_cen_0", Standard - "nand_cen_1", Standard - "nand_cle", Standard - "nand_oen", Standard - "nand_rdy_0", Standard - "nand_rdy_1", Standard - "nand_wen", Standard - "nand_wp", Standard - "pc1", Standard - "pc2", Standard - "pmu_int", Standard - "pmu_scl", I2C - "pmu_sda", I2C - "rfst2g_mtsloten3g", Standard - "rgmii_0_rx_ctl", Standard - "rgmii_0_rxc", Standard - "rgmii_0_rxd_0", Standard - "rgmii_0_rxd_1", Standard - "rgmii_0_rxd_2", Standard - "rgmii_0_rxd_3", Standard - "rgmii_0_tx_ctl", Standard - "rgmii_0_txc", Standard - "rgmii_0_txd_0", Standard - "rgmii_0_txd_1", Standard - "rgmii_0_txd_2", Standard - "rgmii_0_txd_3", Standard - "rgmii_1_rx_ctl", Standard - "rgmii_1_rxc", Standard - "rgmii_1_rxd_0", Standard - "rgmii_1_rxd_1", Standard - "rgmii_1_rxd_2", Standard - "rgmii_1_rxd_3", Standard - "rgmii_1_tx_ctl", Standard - "rgmii_1_txc", Standard - "rgmii_1_txd_0", Standard - "rgmii_1_txd_1", Standard - "rgmii_1_txd_2", Standard - "rgmii_1_txd_3", Standard - "rgmii_gpio_0", Standard - "rgmii_gpio_1", Standard - "rgmii_gpio_2", Standard - "rgmii_gpio_3", Standard - "rtxdata2g_txdata3g1", Standard - "rtxen2g_txdata3g2", Standard - "rxdata3g0", Standard - "rxdata3g1", Standard - "rxdata3g2", Standard - "sdio1_clk", Standard - "sdio1_cmd", Standard - "sdio1_data_0", Standard - "sdio1_data_1", Standard - "sdio1_data_2", Standard - "sdio1_data_3", Standard - "sdio4_clk", Standard - "sdio4_cmd", Standard - "sdio4_data_0", Standard - "sdio4_data_1", Standard - "sdio4_data_2", Standard - "sdio4_data_3", Standard - "sim_clk", Standard - "sim_data", Standard - "sim_det", Standard - "sim_resetn", Standard - "sim2_clk", Standard - "sim2_data", Standard - "sim2_det", Standard - "sim2_resetn", Standard - "sri_c", Standard - "sri_d", Standard - "sri_e", Standard - "ssp_extclk", Standard - "ssp0_clk", Standard - "ssp0_fs", Standard - "ssp0_rxd", Standard - "ssp0_txd", Standard - "ssp2_clk", Standard - "ssp2_fs_0", Standard - "ssp2_fs_1", Standard - "ssp2_fs_2", Standard - "ssp2_fs_3", Standard - "ssp2_rxd_0", Standard - "ssp2_rxd_1", Standard - "ssp2_txd_0", Standard - "ssp2_txd_1", Standard - "ssp3_clk", Standard - "ssp3_fs", Standard - "ssp3_rxd", Standard - "ssp3_txd", Standard - "ssp4_clk", Standard - "ssp4_fs", Standard - "ssp4_rxd", Standard - "ssp4_txd", Standard - "ssp5_clk", Standard - "ssp5_fs", Standard - "ssp5_rxd", Standard - "ssp5_txd", Standard - "ssp6_clk", Standard - "ssp6_fs", Standard - "ssp6_rxd", Standard - "ssp6_txd", Standard - "stat_1", Standard - "stat_2", Standard - "sysclken", Standard - "traceclk", Standard - "tracedt00", Standard - "tracedt01", Standard - "tracedt02", Standard - "tracedt03", Standard - "tracedt04", Standard - "tracedt05", Standard - "tracedt06", Standard - "tracedt07", Standard - "tracedt08", Standard - "tracedt09", Standard - "tracedt10", Standard - "tracedt11", Standard - "tracedt12", Standard - "tracedt13", Standard - "tracedt14", Standard - "tracedt15", Standard - "txdata3g0", Standard - "txpwrind", Standard - "uartb1_ucts", Standard - "uartb1_urts", Standard - "uartb1_urxd", Standard - "uartb1_utxd", Standard - "uartb2_urxd", Standard - "uartb2_utxd", Standard - "uartb3_ucts", Standard - "uartb3_urts", Standard - "uartb3_urxd", Standard - "uartb3_utxd", Standard - "uartb4_ucts", Standard - "uartb4_urts", Standard - "uartb4_urxd", Standard - "uartb4_utxd", Standard - "vc_cam1_scl", I2C - "vc_cam1_sda", I2C - "vc_cam2_scl", I2C - "vc_cam2_sda", I2C - "vc_cam3_scl", I2C - "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml new file mode 100644 index 000000000000..90c275295199 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM281xx pin controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: brcm,bcm11351-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + unevaluatedProperties: false + + properties: + pins: + description: + Specifies the name(s) of one or more pins to be configured by + this node. + items: + enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, + classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2, + clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1, + cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq, + digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00, + gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14, + gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe, + lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4, + lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1, + mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6, + mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2, + mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6, + mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14, + mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n, + mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1, + mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1, + nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle, + nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1, + pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g, + rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1, + rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0, + rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3, + rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1, + rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3, + sim_clk, sim_data, sim_det, sim_resetn, sim2_clk, + sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e, + ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, + ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk, + ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd, + ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk, + ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken, + traceclk, tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, tracedt08 + tracedt09, tracedt10, tracedt11, tracedt12, tracedt13 + tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts, + uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd, + uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd, + uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd, + uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + + function: + description: + Specifies the pin mux selection. + enum: [ alt1, alt2, alt3, alt4 ] + + slew-rate: + description: | + Meaning depends on configured pin mux: + *_scl or *_sda: + 0: Standard (100 kbps) & Fast (400 kbps) mode + 1: Highspeed (3.4 Mbps) mode + ic_dm or ic_dp: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate + + bias-disable: true + input-disable: true + input-enable: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + + # Optional properties for standard pins + - if: + properties: + pins: + contains: + enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0, + clkout_1, clkout_2, clkout_3, clkreq_in_0, + clkreq_in_1, cws_sys_req1, cws_sys_req2, + cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk, + digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01, + gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, + gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, + lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, + lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7, + lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3, + mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8, + mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3, + mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7, + mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, + mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0, + mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n, + mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk, + mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2, + nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, + nand_cle, nand_oen, nand_rdy_0, nand_rdy_1, + nand_wen, nand_wp, pc1, pc2, pmu_int, + rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc, + rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2, + rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, + rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2, + rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc, + rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2, + rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, + sdio4_data_3, sim_clk, sim_data, sim_det, + sim_resetn, sim2_clk, sim2_data, sim2_det, + sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk, + ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk, + ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, + ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, + ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs, + ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd, + ssp6_txd, stat_1, stat_2, sysclken, traceclk, + tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, + tracedt08, tracedt09, tracedt10, tracedt11, + tracedt12, tracedt13, tracedt14, tracedt15, + txdata3g0, txpwrind, uartb1_ucts, uartb1_urts, + uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd, + uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd, + uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ] + then: + properties: + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ] + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + input-schmitt-enable: true + input-schmitt-disable: true + + # Optional properties for I2C pins + - if: + properties: + pins: + contains: + enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl, + pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + then: + properties: + bias-pull-up: + description: + There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins. + enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ] + + bias-disable: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + + dev-a-active-pins { + /* group node defining 1 standard pin */ + std-grp0 { + pins = "gpio00"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + /* group node defining 2 I2C pins */ + i2c-grp0 { + pins = "bsc1_scl", "bsc1_sda"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + /* group node defining 2 HDMI pins */ + hdmi-grp0 { + pins = "hdmi_scl", "hdmi_sda"; + function = "alt3"; + slew-rate = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 222d57541b65..7f30ec2f1e54 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -51,6 +51,10 @@ properties: description: Optional power supply. + reset-gpios: + description: GPIO connected to the XRES pin + maxItems: 1 + patternProperties: '-pins$': type: object diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 35723966b70a..890961826c6f 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -135,7 +135,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -147,8 +146,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true additionalProperties: type: object allOf: @@ -156,7 +153,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml index 065dedb3573a..1690c0ef553a 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml index f924652bef0d..9b7368bd3862 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -32,8 +32,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml index 60a4bdf01bf2..87b6f4f42f25 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -23,8 +23,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml index 432ea40209a8..63cd743a30e0 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -24,8 +24,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml index 28ae2e6d0cbc..e99387a6da5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml index c0eda7848767..36c8f3301a8f 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt deleted file mode 100644 index b1159434f593..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Oxford Semiconductor OXNAS SoC Family Pin Controller - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -OXNAS 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configurations of -pins, optional function, and optional mux related configuration. - -Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - - oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - function: Mux function for the specified pins. - - bias-pull-up: Enable weak pull-up. - -Example: - -pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart2: pinctrl_uart2 { - uart2a { - pins = "gpio31"; - function = "fct3"; - }; - uart2b { - pins = "gpio32"; - function = "fct3"; - }; - }; -}; - -uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - resets = <&reset 22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b05495..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 000000000000..45a307d3ce16 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,am654-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 8aaf50181cef..3f8ad07c7cfd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -26,6 +26,7 @@ properties: - qcom,pm6350-gpio - qcom,pm7250b-gpio - qcom,pm7325-gpio + - qcom,pm7550ba-gpio - qcom,pm8005-gpio - qcom,pm8008-gpio - qcom,pm8018-gpio @@ -53,6 +54,8 @@ properties: - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmc8180-gpio + - qcom,pmc8180c-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +71,7 @@ properties: - qcom,pms405-gpio - qcom,pmx55-gpio - qcom,pmx65-gpio + - qcom,pmx75-gpio - enum: - qcom,spmi-gpio @@ -172,6 +176,7 @@ allOf: compatible: contains: enum: + - qcom,pm7550ba-gpio - qcom,pm8226-gpio - qcom,pm8350b-gpio - qcom,pm8550ve-gpio @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,pmx65-gpio + - qcom,pmx75-gpio then: properties: gpio-line-names: @@ -413,6 +419,7 @@ $defs: - gpio1-gpio9 for pm6350 - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 + - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 @@ -456,6 +463,7 @@ $defs: - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) - gpio1-gpio16 for pmx65 + - gpio1-gpio16 for pmx75 items: pattern: "^gpio([0-9]+)$" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index fa51fa9536f7..00c5a00e35fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -17,11 +17,6 @@ properties: compatible: const: qcom,sc7280-lpass-lpi-pinctrl - qcom,adsp-bypass-mode: - description: - Tells ADSP is in bypass mode. - type: boolean - reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..abac3311fc55 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 SoC LPASS LPI TLMM + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. + +properties: + compatible: + const: qcom,sm6115-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-lpass-state" + additionalProperties: false + +$defs: + qcom-sm6115-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, + i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, + i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0a7c0000 0x20000>, + <0x0a950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..2e65ae08dd21 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC. + +properties: + compatible: + const: qcom,sm8350-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8350-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8350-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8350-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8350-lpass-lpi-pinctrl"; + reg = <0x033c0000 0x20000>, + <0x03550000 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 0fc3c0f52c19..181cd1676c0a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -107,7 +107,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true function: true groups: true pins: true @@ -127,9 +126,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 83800fcf0ce4..2bd7d47d0fdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -108,7 +108,6 @@ additionalProperties: Integers values in "pinmux" argument list are assembled as: ((PORT * 16 + PIN) | MUX_FUNC << 16) - phandle: true input-enable: true output-enable: true @@ -118,9 +117,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 37173a64fed2..8271e7b2c162 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -37,40 +37,37 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + pinmux: description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + required: + - pinmux - properties: - phandle: true - - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. - - required: - - pinmux - - additionalProperties: false + additionalProperties: false allOf: - $ref: pinctrl.yaml# @@ -82,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ce1a07fc015..145c5442f268 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -83,7 +83,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -106,9 +105,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 19d4d2facfb4..816688580e33 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -74,7 +74,6 @@ additionalProperties: offset by 10. Additional identifiers are provided to specify the MDIO source peripheral. - phandle: true bias-disable: true bias-pull-up: description: Pull up the pin with 50 kOhm @@ -91,9 +90,6 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index c87161f2954f..cb81a17bd0b1 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -63,7 +63,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -87,9 +86,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index a6f34df82e90..880da721a927 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -32,7 +32,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -49,7 +48,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da91..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details. diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 24ad0614e61b..01b6f2b57843 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -273,6 +273,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. |