Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextHEADmaster

Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...

22 files changed, 438 insertions, 73 deletions

diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 37a65badb448..0a2d7baf5db3 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -34,6 +34,12 @@ properties:
   firmware-name:
     maxItems: 1
 
+  device-wakeup-gpios:
+    maxItems: 1
+    description:
+      Host-To-Chip power save mechanism is driven by this GPIO
+      connected to BT_WAKE_IN pin of the NXP chipset.
+
 required:
   - compatible
 
@@ -41,10 +47,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     serial {
         bluetooth {
             compatible = "nxp,88w8987-bt";
             fw-init-baudrate = <3000000>;
             firmware-name = "uartuart8987_bt_v0.bin";
+            device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 30c0c3e6f37a..62ca63e8a26f 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -34,6 +34,7 @@ properties:
       - microchip,ksz9563
       - microchip,ksz8563
       - microchip,ksz8567
+      - microchip,lan9646
 
   reset-gpios:
     description:
@@ -81,6 +82,26 @@ properties:
   interrupts:
     maxItems: 1
 
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    properties:
+      mdio-parent-bus:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          Phandle pointing to the MDIO bus controller connected to the
+          secondary MDIO interface. This property should be used when
+          the internal MDIO bus is accessed via a secondary MDIO
+          interface rather than the primary management interface.
+
+    patternProperties:
+      "^ethernet-phy@[0-9a-f]$":
+        type: object
+        $ref: /schemas/net/ethernet-phy.yaml#
+        unevaluatedProperties: false
+        description:
+          Integrated PHY node
+
 required:
   - compatible
   - reg
@@ -138,7 +159,6 @@ examples:
 
         pinctrl-0 = <&pinctrl_spi_ksz>;
         cs-gpios = <&pioC 25 0>;
-        id = <1>;
 
         ksz9477: switch@0 {
             compatible = "microchip,ksz9477";
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 70b6bda3cf98..f348e66fb515 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -147,7 +147,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8366rb";
                     /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
                     mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -163,35 +163,35 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan0";
                                     phy-handle = <&phy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan1";
                                     phy-handle = <&phy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                                     phy-handle = <&phy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan3";
                                     phy-handle = <&phy3>;
                             };
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                                     phy-handle = <&phy4>;
                             };
-                            port@5 {
+                            ethernet-port@5 {
                                     reg = <5>;
                                     ethernet = <&gmac0>;
                                     phy-mode = "rgmii";
@@ -241,7 +241,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8365mb";
                     mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
                     mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@@ -255,30 +255,30 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "swp0";
                                     phy-handle = <&ethphy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "swp1";
                                     phy-handle = <&ethphy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "swp2";
                                     phy-handle = <&ethphy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "swp3";
                                     phy-handle = <&ethphy3>;
                             };
-                            port@6 {
+                            ethernet-port@6 {
                                     reg = <6>;
                                     ethernet = <&fec1>;
                                     phy-mode = "rgmii";
@@ -330,7 +330,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            switch@29 {
+            ethernet-switch@29 {
                     compatible = "realtek,rtl8365mb";
                     reg = <29>;
 
@@ -344,36 +344,36 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
 
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan4";
                             };
 
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan3";
                             };
 
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                             };
 
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan1";
                             };
 
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                             };
 
-                            port@7 {
+                            ethernet-port@7 {
                                     reg = <7>;
                                     ethernet = <&ethernet>;
                                     phy-mode = "rgmii";
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index d9b62741a225..2c71454ae8e3 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -158,6 +158,27 @@ properties:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
+  timing-role:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - forced-master
+      - forced-slave
+      - preferred-master
+      - preferred-slave
+    description: |
+      Specifies the timing role of the PHY in the network link. This property is
+      required for setups where the role must be explicitly assigned via the
+      device tree due to limitations in hardware strapping or incorrect strap
+      configurations.
+      It is applicable to Single Pair Ethernet (1000/100/10Base-T1) and other
+      PHY types, including 1000Base-T, where it controls whether the PHY should
+      be a master (clock source) or a slave (clock receiver).
+
+      - 'forced-master': The PHY is forced to operate as a master.
+      - 'forced-slave': The PHY is forced to operate as a slave.
+      - 'preferred-master': Prefer the PHY to be master but allow negotiation.
+      - 'preferred-slave': Prefer the PHY to be slave but allow negotiation.
+
   pses:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
index c1dd6aa04321..71c43ece8295 100644
--- a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml
@@ -20,10 +20,13 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - pci1957,ee01
-      - const: fsl,enetc-mdio
+    oneOf:
+      - items:
+          - enum:
+              - pci1957,ee01
+          - const: fsl,enetc-mdio
+      - items:
+          - const: pci1131,ee00
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
index e152c93998fe..ca70f0050171 100644
--- a/Documentation/devicetree/bindings/net/fsl,enetc.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml
@@ -20,14 +20,25 @@ maintainers:
 
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - enum:
+              - pci1957,e100
+          - const: fsl,enetc
       - enum:
-          - pci1957,e100
-      - const: fsl,enetc
+          - pci1131,e101
 
   reg:
     maxItems: 1
 
+  clocks:
+    items:
+      - description: MAC transmit/receive reference clock
+
+  clock-names:
+    items:
+      - const: ref
+
   mdio:
     $ref: mdio.yaml
     unevaluatedProperties: false
@@ -40,6 +51,17 @@ required:
 allOf:
   - $ref: /schemas/pci/pci-device.yaml
   - $ref: ethernet-controller.yaml
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - pci1131,e101
+    then:
+      properties:
+        clocks: false
+        clock-names: false
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
index 5536c06139ca..24e863fdbdab 100644
--- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -183,6 +183,13 @@ properties:
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
 
+  fsl,pps-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Specifies to which timer instance the PPS signal is routed.
+    enum: [0, 1, 2, 3]
+
   mdio:
     $ref: mdio.yaml#
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
index 9854fab4c4db..f269615126d8 100644
--- a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
@@ -48,6 +48,12 @@ properties:
   firmware-name:
     description: specify the name of PHY firmware to load
 
+  marvell,mdi-cfg-order:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      force normal (0) or reverse (1) order of MDI pairs, overriding MDI_CFG bootstrap pin.
+
   nvmem-cells:
     description: phandle to the firmware nvmem cell
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
index 71c25c4580ea..cc674b21588c 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
@@ -53,37 +53,21 @@ examples:
 
             ethernet-phy@1 {
                 reg = <1>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <10 8>; /* Pin 10, active low */
             };
             ethernet-phy@2 {
                 reg = <2>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <10 8>; /* Pin 10, active low */
             };
             ethernet-phy@3 {
                 reg = <3>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <10 8>; /* Pin 10, active low */
             };
             ethernet-phy@4 {
                 reg = <4>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <10 8>; /* Pin 10, active low */
             };
@@ -96,37 +80,21 @@ examples:
 
             ethernet-phy@1 {
                 reg = <1>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <12 8>; /* Pin 12, active low */
             };
             ethernet-phy@2 {
                 reg = <2>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <12 8>; /* Pin 12, active low */
             };
             ethernet-phy@3 {
                 reg = <3>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <12 8>; /* Pin 12, active low */
             };
             ethernet-phy@4 {
                 reg = <4>;
-                marvell,reg-init = <3 0x10 0 0x5777>,
-                  <3 0x11 0 0x00aa>,
-                  <3 0x12 0 0x4105>,
-                  <3 0x13 0 0x0a60>;
                 interrupt-parent = <&gpio>;
                 interrupts = <12 8>; /* Pin 12, active low */
             };
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
index fcafef8d5a33..dedfad526666 100644
--- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -9,6 +9,7 @@ title: Microchip Sparx5 Ethernet switch controller
 maintainers:
   - Steen Hegelund <steen.hegelund@microchip.com>
   - Lars Povlsen <lars.povlsen@microchip.com>
+  - Daniel Machon <daniel.machon@microchip.com>
 
 description: |
   The SparX-5 Enterprise Ethernet switch family provides a rich set of
@@ -34,7 +35,24 @@ properties:
     pattern: "^switch@[0-9a-f]+$"
 
   compatible:
-    const: microchip,sparx5-switch
+    oneOf:
+      - enum:
+          - microchip,lan9691-switch
+          - microchip,sparx5-switch
+      - items:
+          - enum:
+              - microchip,lan969c-switch
+              - microchip,lan969b-switch
+              - microchip,lan969a-switch
+              - microchip,lan9699-switch
+              - microchip,lan9698-switch
+              - microchip,lan9697-switch
+              - microchip,lan9696-switch
+              - microchip,lan9695-switch
+              - microchip,lan9694-switch
+              - microchip,lan9693-switch
+              - microchip,lan9692-switch
+          - const: microchip,lan9691-switch
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
index 6924aff0b2c5..364b36151180 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
@@ -17,6 +17,7 @@ properties:
           - enum:
               - nxp,nq310
               - nxp,pn547
+              - nxp,pn553
           - const: nxp,nxp-nci-i2c
 
   enable-gpios:
diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
new file mode 100644
index 000000000000..97389fd5dbbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,netc-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NETC Blocks Control
+
+description:
+  Usually, NETC has 2 blocks of 64KB registers, integrated endpoint register
+  block (IERB) and privileged register block (PRB). IERB is used for pre-boot
+  initialization for all NETC devices, such as ENETC, Timer, EMIDO and so on.
+  And PRB controls global reset and global error handling for NETC. Moreover,
+  for the i.MX platform, there is also a NETCMIX block for link configuration,
+  such as MII protocol, PCS protocol, etc.
+
+maintainers:
+  - Wei Fang <wei.fang@nxp.com>
+  - Clark Wang <xiaoning.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx95-netc-blk-ctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: ierb
+      - const: prb
+      - const: netcmix
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^pcie@[0-9a-f]+$":
+    $ref: /schemas/pci/host-generic-pci.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-controller@4cde0000 {
+            compatible = "nxp,imx95-netc-blk-ctrl";
+            reg = <0x0 0x4cde0000 0x0 0x10000>,
+                  <0x0 0x4cdf0000 0x0 0x10000>,
+                  <0x0 0x4c81000c 0x0 0x18>;
+            reg-names = "ierb", "prb", "netcmix";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            clocks = <&scmi_clk 98>;
+            clock-names = "ipg";
+            power-domains = <&scmi_devpd 18>;
+
+            pcie@4cb00000 {
+                compatible = "pci-host-ecam-generic";
+                reg = <0x0 0x4cb00000 0x0 0x100000>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                bus-range = <0x1 0x1>;
+                ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
+                          0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
+
+                mdio@0,0 {
+                    compatible = "pci1131,ee00";
+                    reg = <0x010000 0 0 0 0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index a754a61adc2d..5f9f7efff538 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -62,6 +62,22 @@ allOf:
             reference clock output when RMII mode enabled.
             Only supported on TJA1100 and TJA1101.
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ethernet-phy-id001b.b010
+              - ethernet-phy-id001b.b013
+              - ethernet-phy-id001b.b030
+              - ethernet-phy-id001b.b031
+
+    then:
+      properties:
+        nxp,rmii-refclk-out:
+          type: boolean
+          description: Enable 50MHz RMII reference clock output on REF_CLK pin.
+
 patternProperties:
   "^ethernet-phy@[0-9a-f]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 6672327358bc..0bcd593a7bd0 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -18,11 +18,20 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,qcs404-ethqos
-      - qcom,sa8775p-ethqos
-      - qcom,sc8280xp-ethqos
-      - qcom,sm8150-ethqos
+    oneOf:
+      - items:
+          - enum:
+              - qcom,qcs8300-ethqos
+          - const: qcom,sa8775p-ethqos
+      - items:
+          - enum:
+              - qcom,qcs615-ethqos
+          - const: qcom,sm8150-ethqos
+      - enum:
+          - qcom,qcs404-ethqos
+          - qcom,sa8775p-ethqos
+          - qcom,sc8280xp-ethqos
+          - qcom,sm8150-ethqos
 
   reg:
     maxItems: 2
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index 29355ab98569..f0a52f47f95a 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -59,6 +59,9 @@ properties:
   clocks:
     maxItems: 1
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -123,7 +126,6 @@ examples:
             reg = <1>;
             interrupt-parent = <&irqc0>;
             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-            micrel,led-mode = <1>;
             reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 90611b598d2b..15616ad737f5 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -132,7 +132,7 @@ examples:
         pinctrl-names = "default";
         pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
         reg = <0>;
-        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+        interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
         sfp = <&sfp2>;
       };
     };
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 4e2ba1bf788c..eb1f3ae41ab9 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -26,6 +26,7 @@ select:
           - snps,dwmac-3.610
           - snps,dwmac-3.70a
           - snps,dwmac-3.710
+          - snps,dwmac-3.72a
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
           - snps,dwmac-4.20a
@@ -90,6 +91,7 @@ properties:
         - snps,dwmac-3.610
         - snps,dwmac-3.70a
         - snps,dwmac-3.710
+        - snps,dwmac-3.72a
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
         - snps,dwmac-4.20a
@@ -99,6 +101,7 @@ properties:
         - snps,dwxgmac-2.10
         - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
+        - thead,th1520-gmac
 
   reg:
     minItems: 1
@@ -560,7 +563,7 @@ properties:
           max read outstanding req. limit
 
       snps,kbbe:
-        $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/flag
         description:
           do not cross 1KiB boundary.
 
diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
new file mode 100644
index 000000000000..6d9de3303762
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 GMAC Ethernet controller
+
+maintainers:
+  - Drew Fustini <dfustini@tenstorrent.com>
+
+description: |
+  The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual
+  https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
+
+  Features include
+    - Compliant with IEEE802.3 Specification
+    - IEEE 1588-2008 standard for precision networked clock synchronization
+    - Supports 10/100/1000Mbps data transfer rate
+    - Supports RGMII/MII interface
+    - Preamble and start of frame data (SFD) insertion in Transmit path
+    - Preamble and SFD deletion in the Receive path
+    - Automatic CRC and pad generation options for receive frames
+    - MDIO master interface for PHY device configuration and management
+
+  The GMAC Registers consists of two parts
+    - APB registers are used to configure clock frequency/clock enable/clock
+      direction/PHY interface type.
+    - AHB registers are use to configure GMAC core (DesignWare Core part).
+      GMAC core register consists of DMA registers and GMAC registers.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - thead,th1520-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - thead,th1520-gmac
+      - const: snps,dwmac-3.70a
+
+  reg:
+    items:
+      - description: DesignWare GMAC IP core registers
+      - description: GMAC APB registers
+
+  reg-names:
+    items:
+      - const: dwmac
+      - const: apb
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: Peripheral registers interface clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+
+  interrupts:
+    items:
+      - description: Combined signal for various interrupt events
+
+  interrupt-names:
+    items:
+      - const: macirq
+
+required:
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gmac0: ethernet@e7070000 {
+        compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
+        reg = <0xe7070000 0x2000>, <0xec003000 0x1000>;
+        reg-names = "dwmac", "apb";
+        clocks = <&clk 1>, <&clk 2>;
+        clock-names = "stmmaceth", "pclk";
+        interrupts = <66>;
+        interrupt-names = "macirq";
+        phy-mode = "rgmii-id";
+        snps,fixed-burst;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,pbl = <32>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index e564f20d8f41..a3607d55ef36 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -53,6 +53,7 @@ properties:
           - pci14e4,4488  # BCM4377
           - pci14e4,4425  # BCM4378
           - pci14e4,4433  # BCM4387
+          - pci14e4,449d  # BCM43752
 
   reg:
     description: SDIO function number for the device (for most cases
@@ -121,6 +122,14 @@ properties:
       NVRAM. This would normally be filled in by the bootloader from platform
       configuration data.
 
+  clocks:
+    items:
+      - description: External Low Power Clock input (32.768KHz)
+
+  clock-names:
+    items:
+      - const: lpo
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 2460ccc08237..5d40f22765bb 100644
--- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -16,7 +16,11 @@ description:
 
 properties:
   compatible:
-    const: microchip,wilc1000
+    oneOf:
+      - items:
+          - const: microchip,wilc3000
+          - const: microchip,wilc1000
+      - const: microchip,wilc1000
 
   reg: true
 
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
index 8675d7d0215c..a71fdf05bc1e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -50,6 +50,9 @@ properties:
   vddrfa1p7-supply:
     description: VDD_RFA_1P7 supply regulator handle
 
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
   vddpcie0p9-supply:
     description: VDD_PCIE_0P9 supply regulator handle
 
@@ -77,6 +80,22 @@ allOf:
         - vddrfa1p7-supply
         - vddpcie0p9-supply
         - vddpcie1p8-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: pci17cb,1103
+    then:
+      required:
+        - vddrfacmn-supply
+        - vddaon-supply
+        - vddwlcx-supply
+        - vddwlmx-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+        - vddpcie0p9-supply
+        - vddpcie1p8-supply
 
 additionalProperties: false
 
@@ -99,6 +118,16 @@ examples:
                 compatible = "pci17cb,1103";
                 reg = <0x10000 0x0 0x0 0x0 0x0>;
 
+                vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+                vddaon-supply = <&vreg_pmu_aon_0p8>;
+                vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+                vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+                vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+                vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+                vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+                vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+                vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
                 qcom,ath11k-calibration-variant = "LE_X13S";
             };
         };
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
index 92d8ade988f6..e16384aff557 100644
--- a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -29,6 +29,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   phy-handle: true
 
   local-mac-address: true
@@ -45,6 +48,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - clocks
   - phy-handle
 
 additionalProperties: false
@@ -56,6 +60,7 @@ examples:
         reg = <0x40e00000 0x10000>;
         interrupt-parent = <&axi_intc_1>;
         interrupts = <1>;
+        clocks = <&dummy>;
         local-mac-address = [00 00 00 00 00 00];
         phy-handle = <&phy0>;
         xlnx,rx-ping-pong;