Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

3 files changed, 11 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index a61dd40f3792..551ae26f60da 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
 
 MDSS:
 Required properties:
-- compatible: "qcom,sdm845-mdss"
+- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
 - reg: physical base address and length of contoller's registers.
 - reg-names: register region names. The following region is required:
   * "mdss"
@@ -41,7 +41,7 @@ Optional properties:
 
 MDP:
 Required properties:
-- compatible: "qcom,sdm845-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
 - reg: physical base address and length of controller's registers.
 - reg-names : register region names. The following region is required:
   * "mdp"
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 2b8fd26c43b0..7edc298a15f2 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -23,13 +23,18 @@ Required properties:
 - iommus: optional phandle to an adreno iommu instance
 - operating-points-v2: optional phandle to the OPP operating points
 - interconnects: optional phandle to an interconnect provider.  See
-  ../interconnect/interconnect.txt for details.
+  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
+  will have two paths; all others will have one path.
+- interconnect-names: The names of the interconnect paths that correspond to the
+  interconnects property. Values must be gfx-mem and ocmem.
 - qcom,gmu: For GMU attached devices a phandle to the GMU device that will
   control the power for the GPU. Applicable targets:
     - qcom,adreno-630.2
 - zap-shader: For a5xx and a6xx devices this node contains a memory-region that
   points to reserved memory to store the zap shader that can be used to help
   bring the GPU out of secure mode.
+- firmware-name: optional property of the 'zap-shader' node, listing the
+  relative path of the device specific zap firmware.
 
 Example 3xx/4xx/a5xx:
 
@@ -76,11 +81,13 @@ Example a6xx (with GMU):
 		operating-points-v2 = <&gpu_opp_table>;
 
 		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+		interconnect-names = "gfx-mem";
 
 		qcom,gmu = <&gmu>;
 
 		zap-shader {
 			memory-region = <&zap_shader_region>;
+			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
 		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
index 472e1ea6c591..c985871c46b3 100644
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@@ -6,6 +6,7 @@ Required properties:
 - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
 		Should be "fsl,imx28-lcdif" for i.MX28.
 		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
 - reg:		Address and length of the register set for LCDIF
 - interrupts:	Should contain LCDIF interrupt
 - clocks:	A list of phandle + clock-specifier pairs, one for each