summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-06-25 15:19:17 +0400
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-13 11:44:19 +0400
commitf860b0522f65d3a0f8e6a4d908933737e1a82817 (patch)
tree8002a666789db1196fd85df663d0fc4d8e852723
parent531c4f896ca380812c22841e8ae396428a3327bf (diff)
downloadlinux-f860b0522f65d3a0f8e6a4d908933737e1a82817.tar.xz
drivers/net: Kconfig and Makefile cleanup
After the move of the Ethernet drivers into drivers/net/ethernet/ there was some leftover cleanup to do in the Kconfig and Makefile. Removed the 10/100, 1000, and 10GbE Kconfig menus. Removed the out-dated pci-skeleton.c file which was used an example driver. With the current networking features and structure, the file is no longer a good example to use for driver creation. CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-rw-r--r--drivers/net/Kconfig116
-rw-r--r--drivers/net/Makefile4
-rw-r--r--drivers/net/ethernet/Kconfig6
-rw-r--r--drivers/net/pci-skeleton.c1923
4 files changed, 6 insertions, 2043 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 3a1fd2c716c3..31d87929c1ad 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -192,122 +192,6 @@ source "drivers/net/phy/Kconfig"
source "drivers/net/ethernet/Kconfig"
-menuconfig NET_ETHERNET
- bool "Ethernet (10 or 100Mbit)"
- depends on !UML
- ---help---
- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
- type of Local Area Network (LAN) in universities and companies.
-
- Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
- coaxial cable, linking computers in a chain), 10BASE-T or twisted
- pair (10 Mbps over twisted pair cable, linking computers to central
- hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
- 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
- 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
- cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
- [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
- Ethernet (1 Gbps over optical fiber or short copper links).
-
- If your Linux machine will be connected to an Ethernet and you have
- an Ethernet network interface card (NIC) installed in your computer,
- say Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. You will then also have
- to say Y to the driver for your particular NIC.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-if NET_ETHERNET
-
-config NET_PCI
- bool "EISA, VLB, PCI and on board controllers"
- depends on ISA || EISA || PCI
- help
- This is another class of network cards which attach directly to the
- bus. If you have one of those, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about this class of network cards. If you say Y, you
- will be asked for your specific card in the following questions. If
- you are unsure, say Y.
-
-config NET_POCKET
- bool "Pocket and portable adapters"
- depends on PARPORT
- ---help---
- Cute little network (Ethernet) devices which attach to the parallel
- port ("pocket adapters"), commonly used with laptops. If you have
- one of those, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- If you want to plug a network (or some other) card into the PCMCIA
- (or PC-card) slot of your laptop instead (PCMCIA is the standard for
- credit card size extension cards used by all modern laptops), you
- need the pcmcia-cs package (location contained in the file
- <file:Documentation/Changes>) and you can say N here.
-
- Laptop users should read the Linux Laptop home page at
- <http://www.linux-on-laptops.com/> or
- Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about this class of network devices. If you say Y, you
- will be asked for your specific device in the following questions.
-
-endif # NET_ETHERNET
-
-#
-# Gigabit Ethernet
-#
-
-menuconfig NETDEV_1000
- bool "Ethernet (1000 Mbit)"
- depends on !UML
- default y
- ---help---
- Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
- type of Local Area Network (LAN) in universities and companies.
-
- Say Y here to get to see options for Gigabit Ethernet drivers.
- This option alone does not add any kernel code.
- Note that drivers supporting both 100 and 1000 MBit may be listed
- under "Ethernet (10 or 100MBit)" instead.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_1000
-
-endif # NETDEV_1000
-
-#
-# 10 Gigabit Ethernet
-#
-
-menuconfig NETDEV_10000
- bool "Ethernet (10000 Mbit)"
- depends on !UML
- default y
- ---help---
- Say Y here to get to see options for 10 Gigabit Ethernet drivers.
- This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if NETDEV_10000
-
-config MDIO
- tristate
-
-config SUNGEM_PHY
- tristate
-
-endif # NETDEV_10000
-
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fcc62e603a28..9cb47bb3a816 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,9 +13,7 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
# link order important here
#
obj-$(CONFIG_PLIP) += plip.o
-
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_RIONET) += rionet.o
@@ -25,7 +23,6 @@ obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
@@ -35,7 +32,6 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
obj-$(CONFIG_PPPOL2TP) += pppox.o
obj-$(CONFIG_PPTP) += pppox.o pptp.o
-
obj-$(CONFIG_SLIP) += slip.o
obj-$(CONFIG_SLHC) += slhc.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1f5a32dbe04c..1f647471e651 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -11,6 +11,12 @@ menuconfig ETHERNET
if ETHERNET
+config MDIO
+ tristate
+
+config SUNGEM_PHY
+ tristate
+
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
deleted file mode 100644
index c0f23376a462..000000000000
--- a/drivers/net/pci-skeleton.c
+++ /dev/null
@@ -1,1923 +0,0 @@
-/*
-
- drivers/net/pci-skeleton.c
-
- Maintained by Jeff Garzik <jgarzik@pobox.com>
-
- Original code came from 8139too.c, which in turns was based
- originally on Donald Becker's rtl8139.c driver, versions 1.11
- and older. This driver was originally based on rtl8139.c
- version 1.07. Header of rtl8139.c version 1.11:
-
- -----<snip>-----
-
- Written 1997-2000 by Donald Becker.
- This software may be used and distributed according to the
- terms of the GNU General Public License (GPL), incorporated
- herein by reference. Drivers based on or derived from this
- code fall under the GPL and must retain the authorship,
- copyright and license notice. This file is not a complete
- program and may only be used when the entire operating
- system is licensed under the GPL.
-
- This driver is for boards based on the RTL8129 and RTL8139
- PCI ethernet chips.
-
- The author may be reached as becker@scyld.com, or C/O Scyld
- Computing Corporation 410 Severn Ave., Suite 210 Annapolis
- MD 21403
-
- Support and updates available at
- http://www.scyld.com/network/rtl8139.html
-
- Twister-tuning table provided by Kinston
- <shangh@realtek.com.tw>.
-
- -----<snip>-----
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
-
------------------------------------------------------------------------------
-
- Theory of Operation
-
-I. Board Compatibility
-
-This device driver is designed for the RealTek RTL8139 series, the RealTek
-Fast Ethernet controllers for PCI and CardBus. This chip is used on many
-low-end boards, sometimes with its markings changed.
-
-
-II. Board-specific settings
-
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board. The system BIOS will assign the
-PCI INTA signal to a (preferably otherwise unused) system IRQ line.
-
-III. Driver operation
-
-IIIa. Rx Ring buffers
-
-The receive unit uses a single linear ring buffer rather than the more
-common (and more efficient) descriptor-based architecture. Incoming frames
-are sequentially stored into the Rx region, and the host copies them into
-skbuffs.
-
-Comment: While it is theoretically possible to process many frames in place,
-any delay in Rx processing would cause us to drop frames. More importantly,
-the Linux protocol stack is not designed to operate in this manner.
-
-IIIb. Tx operation
-
-The RTL8139 uses a fixed set of four Tx descriptors in register space.
-In a stunningly bad design choice, Tx frames must be 32 bit aligned. Linux
-aligns the IP header on word boundaries, and 14 byte ethernet header means
-that almost all frames will need to be copied to an alignment buffer.
-
-IVb. References
-
-http://www.realtek.com.tw/
-http://www.scyld.com/expert/NWay.html
-
-IVc. Errata
-
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/io.h>
-
-#define NETDRV_VERSION "1.0.1"
-#define MODNAME "netdrv"
-#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
-
-static char version[] __devinitdata =
- KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
- " Support available from http://foo.com/bar/baz.html\n";
-
-/* define to 1 to enable PIO instead of MMIO */
-#undef USE_IO_OPS
-
-/* define to 1 to enable copious debugging info */
-#undef NETDRV_DEBUG
-
-/* define to 1 to disable lightweight runtime debugging checks */
-#undef NETDRV_NDEBUG
-
-
-#ifdef NETDRV_DEBUG
-/* note: prints function name for you */
-#define DPRINTK(fmt, args...) \
- printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-#define DPRINTK(fmt, args...) \
-do { \
- if (0) \
- printk(KERN_DEBUG fmt, ##args); \
-} while (0)
-#endif
-
-#ifdef NETDRV_NDEBUG
-#define assert(expr) do {} while (0)
-#else
-#define assert(expr) \
- if (!(expr)) { \
- printk("Assertion failed! %s,%s,%s,line=%d\n", \
- #expr, __FILE__, __func__, __LINE__); \
- }
-#endif
-
-
-/* A few user-configurable values. */
-/* media options */
-static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1};
-
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static int max_interrupt_work = 20;
-
-/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
- The RTL chips use a 64 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 32;
-
-/* Size of the in-memory receive ring. */
-#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */
-#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
-#define RX_BUF_PAD 16
-#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
-#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
-
-/* Number of Tx descriptor registers. */
-#define NUM_TX_DESC 4
-
-/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
-#define MAX_ETH_FRAME_SIZE 1536
-
-/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
-#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
-#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
-
-/* PCI Tuning Parameters
- Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
-
-/* The following settings are log_2(bytes)-4:
- 0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
-*/
-#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */
-#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
-#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
-
-
-/* Operational parameters that usually are not changed. */
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT (6 * HZ)
-
-enum {
- HAS_CHIP_XCVR = 0x020000,
- HAS_LNK_CHNG = 0x040000,
-};
-
-#define NETDRV_MIN_IO_SIZE 0x80
-#define RTL8139B_IO_SIZE 256
-
-#define NETDRV_CAPS (HAS_CHIP_XCVR | HAS_LNK_CHNG)
-
-typedef enum {
- RTL8139 = 0,
- NETDRV_CB,
- SMC1211TX,
- /*MPX5030,*/
- DELTA8139,
- ADDTRON8139,
-} board_t;
-
-
-/* indexed by board_t, above */
-static struct {
- const char *name;
-} board_info[] __devinitdata = {
- { "RealTek RTL8139 Fast Ethernet" },
- { "RealTek RTL8139B PCI/CardBus" },
- { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
-/* { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
- { "Delta Electronics 8139 10/100BaseTX" },
- { "Addtron Technology 8139 10/100BaseTX" },
-};
-
-
-static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
- {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
- {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, NETDRV_CB },
- {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMC1211TX },
-/* {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MPX5030 },*/
- {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DELTA8139 },
- {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
- {0,}
-};
-MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
-
-
-/* The rest of these values should never change. */
-
-/* Symbolic offsets to registers. */
-enum NETDRV_registers {
- MAC0 = 0, /* Ethernet hardware address. */
- MAR0 = 8, /* Multicast filter. */
- TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
- TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
- RxBuf = 0x30,
- RxEarlyCnt = 0x34,
- RxEarlyStatus = 0x36,
- ChipCmd = 0x37,
- RxBufPtr = 0x38,
- RxBufAddr = 0x3A,
- IntrMask = 0x3C,
- IntrStatus = 0x3E,
- TxConfig = 0x40,
- ChipVersion = 0x43,
- RxConfig = 0x44,
- Timer = 0x48, /* A general-purpose counter. */
- RxMissed = 0x4C, /* 24 bits valid, write clears. */
- Cfg9346 = 0x50,
- Config0 = 0x51,
- Config1 = 0x52,
- FlashReg = 0x54,
- MediaStatus = 0x58,
- Config3 = 0x59,
- Config4 = 0x5A, /* absent on RTL-8139A */
- HltClk = 0x5B,
- MultiIntr = 0x5C,
- TxSummary = 0x60,
- BasicModeCtrl = 0x62,
- BasicModeStatus = 0x64,
- NWayAdvert = 0x66,
- NWayLPAR = 0x68,
- NWayExpansion = 0x6A,
- /* Undocumented registers, but required for proper operation. */
- FIFOTMS = 0x70, /* FIFO Control and test. */
- CSCR = 0x74, /* Chip Status and Configuration Register. */
- PARA78 = 0x78,
- PARA7c = 0x7c, /* Magic transceiver parameter register. */
- Config5 = 0xD8, /* absent on RTL-8139A */
-};
-
-enum ClearBitMasks {
- MultiIntrClear = 0xF000,
- ChipCmdClear = 0xE2,
- Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
-};
-
-enum ChipCmdBits {
- CmdReset = 0x10,
- CmdRxEnb = 0x08,
- CmdTxEnb = 0x04,
- RxBufEmpty = 0x01,
-};
-
-/* Interrupt register bits, using my own meaningful names. */
-enum IntrStatusBits {
- PCIErr = 0x8000,
- PCSTimeout = 0x4000,
- RxFIFOOver = 0x40,
- RxUnderrun = 0x20,
- RxOverflow = 0x10,
- TxErr = 0x08,
- TxOK = 0x04,
- RxErr = 0x02,
- RxOK = 0x01,
-};
-enum TxStatusBits {
- TxHostOwns = 0x2000,
- TxUnderrun = 0x4000,
- TxStatOK = 0x8000,
- TxOutOfWindow = 0x20000000,
- TxAborted = 0x40000000,
- TxCarrierLost = 0x80000000,
-};
-enum RxStatusBits {
- RxMulticast = 0x8000,
- RxPhysical = 0x4000,
- RxBroadcast = 0x2000,
- RxBadSymbol = 0x0020,
- RxRunt = 0x0010,
- RxTooLong = 0x0008,
- RxCRCErr = 0x0004,
- RxBadAlign = 0x0002,
- RxStatusOK = 0x0001,
-};
-
-/* Bits in RxConfig. */
-enum rx_mode_bits {
- AcceptErr = 0x20,
- AcceptRunt = 0x10,
- AcceptBroadcast = 0x08,
- AcceptMulticast = 0x04,
- AcceptMyPhys = 0x02,
- AcceptAllPhys = 0x01,
-};
-
-/* Bits in TxConfig. */
-enum tx_config_bits {
- TxIFG1 = (1 << 25), /* Interframe Gap Time */
- TxIFG0 = (1 << 24), /* Enabling these bits violates IEEE 802.3 */
- TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
- TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */
- TxClearAbt = (1 << 0), /* Clear abort (WO) */
- TxDMAShift = 8, /* DMA burst value(0-7) is shift this many bits */
-
- TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
-};
-
-/* Bits in Config1 */
-enum Config1Bits {
- Cfg1_PM_Enable = 0x01,
- Cfg1_VPD_Enable = 0x02,
- Cfg1_PIO = 0x04,
- Cfg1_MMIO = 0x08,
- Cfg1_LWAKE = 0x10,
- Cfg1_Driver_Load = 0x20,
- Cfg1_LED0 = 0x40,
- Cfg1_LED1 = 0x80,
-};
-
-enum RxConfigBits {
- /* Early Rx threshold, none or X/16 */
- RxCfgEarlyRxNone = 0,
- RxCfgEarlyRxShift = 24,
-
- /* rx fifo threshold */
- RxCfgFIFOShift = 13,
- RxCfgFIFONone = (7 << RxCfgFIFOShift),
-
- /* Max DMA burst */
- RxCfgDMAShift = 8,
- RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
-
- /* rx ring buffer length */
- RxCfgRcv8K = 0,
- RxCfgRcv16K = (1 << 11),
- RxCfgRcv32K = (1 << 12),
- RxCfgRcv64K = (1 << 11) | (1 << 12),
-
- /* Disable packet wrap at end of Rx buffer */
- RxNoWrap = (1 << 7),
-};
-
-
-/* Twister tuning parameters from RealTek.
- Completely undocumented, but required to tune bad links. */
-enum CSCRBits {
- CSCR_LinkOKBit = 0x0400,
- CSCR_LinkChangeBit = 0x0800,
- CSCR_LinkStatusBits = 0x0f000,
- CSCR_LinkDownOffCmd = 0x003c0,
- CSCR_LinkDownCmd = 0x0f3c0,
-};
-
-
-enum Cfg9346Bits {
- Cfg9346_Lock = 0x00,
- Cfg9346_Unlock = 0xC0,
-};
-
-
-#define PARA78_default 0x78fa8388
-#define PARA7c_default 0xcb38de43 /* param[0][3] */
-#define PARA7c_xxx 0xcb38de43
-static const unsigned long param[4][4] = {
- {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
- {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
- {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
- {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
-};
-
-struct ring_info {
- struct sk_buff *skb;
- dma_addr_t mapping;
-};
-
-
-typedef enum {
- CH_8139 = 0,
- CH_8139_K,
- CH_8139A,
- CH_8139B,
- CH_8130,
- CH_8139C,
-} chip_t;
-
-
-/* directly indexed by chip_t, above */
-static const struct {
- const char *name;
- u8 version; /* from RTL8139C docs */
- u32 RxConfigMask; /* should clear the bits supported by this chip */
-} rtl_chip_info[] = {
- { "RTL-8139",
- 0x40,
- 0xf0fe0040, /* XXX copied from RTL8139A, verify */
- },
-
- { "RTL-8139 rev K",
- 0x60,
- 0xf0fe0040,
- },
-
- { "RTL-8139A",
- 0x70,
- 0xf0fe0040,
- },
-
- { "RTL-8139B",
- 0x78,
- 0xf0fc0040
- },
-
- { "RTL-8130",
- 0x7C,
- 0xf0fe0040, /* XXX copied from RTL8139A, verify */
- },
-
- { "RTL-8139C",
- 0x74,
- 0xf0fc0040, /* XXX copied from RTL8139B, verify */
- },
-
-};
-
-
-struct netdrv_private {
- board_t board;
- void *mmio_addr;
- int drv_flags;
- struct pci_dev *pci_dev;
- struct timer_list timer; /* Media selection timer. */
- unsigned char *rx_ring;
- unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
- unsigned int tx_flag;
- atomic_t cur_tx;
- atomic_t dirty_tx;
- /* The saved address of a sent-in-place packet/buffer, for skfree(). */
- struct ring_info tx_info[NUM_TX_DESC];
- unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
- unsigned char *tx_bufs; /* Tx bounce buffer region. */
- dma_addr_t rx_ring_dma;
- dma_addr_t tx_bufs_dma;
- char phys[4]; /* MII device addresses. */
- char twistie, twist_row, twist_col; /* Twister tune state. */
- unsigned int full_duplex:1; /* Full-duplex operation requested. */
- unsigned int duplex_lock:1;
- unsigned int default_port:4; /* Last dev->if_port value. */
- unsigned int media2:4; /* Secondary monitored media port. */
- unsigned int medialock:1; /* Don't sense media type. */
- unsigned int mediasense:1; /* Media sensing in progress. */
- spinlock_t lock;
- chip_t chipset;
-};
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
-MODULE_LICENSE("GPL");
-module_param(multicast_filter_limit, int, 0);
-module_param(max_interrupt_work, int, 0);
-module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC(multicast_filter_limit,
- MODNAME " maximum number of filtered multicast addresses");
-MODULE_PARM_DESC(max_interrupt_work,
- MODNAME " maximum events handled per interrupt");
-MODULE_PARM_DESC(media,
- MODNAME " Bits 0-3: media type, bit 17: full duplex");
-
-static int read_eeprom(void *ioaddr, int location, int addr_len);
-static int netdrv_open(struct net_device *dev);
-static int mdio_read(struct net_device *dev, int phy_id, int location);
-static void mdio_write(struct net_device *dev, int phy_id, int location,
- int val);
-static void netdrv_timer(unsigned long data);
-static void netdrv_tx_timeout(struct net_device *dev);
-static void netdrv_init_ring(struct net_device *dev);
-static int netdrv_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
-static int netdrv_close(struct net_device *dev);
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static void netdrv_set_rx_mode(struct net_device *dev);
-static void netdrv_hw_start(struct net_device *dev);
-
-
-#ifdef USE_IO_OPS
-
-#define NETDRV_R8(reg) inb(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R16(reg) inw(((unsigned long)ioaddr) + (reg))
-#define NETDRV_R32(reg) ((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
-#define NETDRV_W8(reg, val8) outb((val8), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W16(reg, val16) outw((val16), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W32(reg, val32) outl((val32), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W8_F NETDRV_W8
-#define NETDRV_W16_F NETDRV_W16
-#define NETDRV_W32_F NETDRV_W32
-#undef readb
-#undef readw
-#undef readl
-#undef writeb
-#undef writew
-#undef writel
-#define readb(addr) inb((unsigned long)(addr))
-#define readw(addr) inw((unsigned long)(addr))
-#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val, addr) outb((val), (unsigned long)(addr))
-#define writew(val, addr) outw((val), (unsigned long)(addr))
-#define writel(val, addr) outl((val), (unsigned long)(addr))
-
-#else
-
-/* write MMIO register, with flush */
-/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define NETDRV_W8_F(reg, val8) \
-do { \
- writeb((val8), ioaddr + (reg)); \
- readb(ioaddr + (reg)); \
-} while (0)
-#define NETDRV_W16_F(reg, val16) \
-do { \
- writew((val16), ioaddr + (reg)); \
- readw(ioaddr + (reg)); \
-} while (0)
-#define NETDRV_W32_F(reg, val32) \
-do { \
- writel((val32), ioaddr + (reg)); \
- readl(ioaddr + (reg)); \
-} while (0)
-
-
-#ifdef MMIO_FLUSH_AUDIT_COMPLETE
-
-/* write MMIO register */
-#define NETDRV_W8(reg, val8) writeb((val8), ioaddr + (reg))
-#define NETDRV_W16(reg, val16) writew((val16), ioaddr + (reg))
-#define NETDRV_W32(reg, val32) writel((val32), ioaddr + (reg))
-
-#else
-
-/* write MMIO register, then flush */
-#define NETDRV_W8 NETDRV_W8_F
-#define NETDRV_W16 NETDRV_W16_F
-#define NETDRV_W32 NETDRV_W32_F
-
-#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
-
-/* read MMIO register */
-#define NETDRV_R8(reg) readb(ioaddr + (reg))
-#define NETDRV_R16(reg) readw(ioaddr + (reg))
-#define NETDRV_R32(reg) ((unsigned long) readl(ioaddr + (reg)))
-
-#endif /* USE_IO_OPS */
-
-
-static const u16 netdrv_intr_mask =
- PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
- TxErr | TxOK | RxErr | RxOK;
-
-static const unsigned int netdrv_rx_config =
- RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
- (RX_FIFO_THRESH << RxCfgFIFOShift) |
- (RX_DMA_BURST << RxCfgDMAShift);
-
-
-static int __devinit netdrv_init_board(struct pci_dev *pdev,
- struct net_device **dev_out,
- void **ioaddr_out)
-{
- void *ioaddr = NULL;
- struct net_device *dev;
- struct netdrv_private *tp;
- int rc, i;
- u32 pio_start, pio_end, pio_flags, pio_len;
- unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
- u32 tmp;
-
- DPRINTK("ENTER\n");
-
- assert(pdev != NULL);
- assert(ioaddr_out != NULL);
-
- *ioaddr_out = NULL;
- *dev_out = NULL;
-
- /* dev zeroed in alloc_etherdev */
- dev = alloc_etherdev(sizeof(*tp));
- if (dev == NULL) {
- dev_err(&pdev->dev, "unable to alloc new ethernet\n");
- DPRINTK("EXIT, returning -ENOMEM\n");
- return -ENOMEM;
- }
- SET_NETDEV_DEV(dev, &pdev->dev);
- tp = netdev_priv(dev);
-
- /* enable device(incl. PCI PM wakeup), and bus-mastering */
- rc = pci_enable_device(pdev);
- if (rc)
- goto err_out;
-
- pio_start = pci_resource_start(pdev, 0);
- pio_end = pci_resource_end(pdev, 0);
- pio_flags = pci_resource_flags(pdev, 0);
- pio_len = pci_resource_len(pdev, 0);
-
- mmio_start = pci_resource_start(pdev, 1);
- mmio_end = pci_resource_end(pdev, 1);
- mmio_flags = pci_resource_flags(pdev, 1);
- mmio_len = pci_resource_len(pdev, 1);
-
- /* set this immediately, we need to know before
- * we talk to the chip directly */
- DPRINTK("PIO region size == %#02X\n", pio_len);
- DPRINTK("MMIO region size == %#02lX\n", mmio_len);
-
- /* make sure PCI base addr 0 is PIO */
- if (!(pio_flags & IORESOURCE_IO)) {
- dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
- rc = -ENODEV;
- goto err_out;
- }
-
- /* make sure PCI base addr 1 is MMIO */
- if (!(mmio_flags & IORESOURCE_MEM)) {
- dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
- rc = -ENODEV;
- goto err_out;
- }
-
- /* check for weird/broken PCI region reporting */
- if ((pio_len < NETDRV_MIN_IO_SIZE) ||
- (mmio_len < NETDRV_MIN_IO_SIZE)) {
- dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
- rc = -ENODEV;
- goto err_out;
- }
-
- rc = pci_request_regions(pdev, MODNAME);
- if (rc)
- goto err_out;
-
- pci_set_master(pdev);
-
-#ifdef USE_IO_OPS
- ioaddr = (void *)pio_start;
-#else
- /* ioremap MMIO region */
- ioaddr = ioremap(mmio_start, mmio_len);
- if (ioaddr == NULL) {
- dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
- rc = -EIO;
- goto err_out_free_res;
- }
-#endif /* USE_IO_OPS */
-
- /* Soft reset the chip. */
- NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
-
- /* Check that the chip has finished the reset. */
- for (i = 1000; i > 0; i--)
- if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
- break;
- else
- udelay(10);
-
- /* Bring the chip out of low-power mode. */
- /* <insert device-specific code here> */
-
-#ifndef USE_IO_OPS
- /* sanity checks -- ensure PIO and MMIO registers agree */
- assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
- assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
- assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
- assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
-#endif /* !USE_IO_OPS */
-
- /* identify chip attached to board */
- tmp = NETDRV_R8(ChipVersion);
- for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
- if (tmp == rtl_chip_info[i].version) {
- tp->chipset = i;
- goto match;
- }
-
- /* if unknown chip, assume array element #0, original RTL-8139 in this case */
- dev_printk(KERN_DEBUG, &pdev->dev,
- "unknown chip version, assuming RTL-8139\n");
- dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
- NETDRV_R32(TxConfig));
- tp->chipset = 0;
-
-match:
- DPRINTK("chipset id(%d) == index %d, '%s'\n",
- tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
-
- rc = register_netdev(dev);
- if (rc)
- goto err_out_unmap;
-
- DPRINTK("EXIT, returning 0\n");
- *ioaddr_out = ioaddr;
- *dev_out = dev;
- return 0;
-
-err_out_unmap:
-#ifndef USE_IO_OPS
- iounmap(ioaddr);
-err_out_free_res:
-#endif
- pci_release_regions(pdev);
-err_out:
- free_netdev(dev);
- DPRINTK("EXIT, returning %d\n", rc);
- return rc;
-}
-
-static const struct net_device_ops netdrv_netdev_ops = {
- .ndo_open = netdrv_open,
- .ndo_stop = netdrv_close,
- .ndo_start_xmit = netdrv_start_xmit,
- .ndo_set_multicast_list = netdrv_set_rx_mode,
- .ndo_do_ioctl = netdrv_ioctl,
- .ndo_tx_timeout = netdrv_tx_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
-};
-
-static int __devinit netdrv_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *dev = NULL;
- struct netdrv_private *tp;
- int i, addr_len, option;
- void *ioaddr = NULL;
- static int board_idx = -1;
-
-/* when built into the kernel, we only print version if device is found */
-#ifndef MODULE
- static int printed_version;
- if (!printed_version++)
- printk(version);
-#endif
-
- DPRINTK("ENTER\n");
-
- assert(pdev != NULL);
- assert(ent != NULL);
-
- board_idx++;
-
- i = netdrv_init_board(pdev, &dev, &ioaddr);
- if (i < 0) {
- DPRINTK("EXIT, returning %d\n", i);
- return i;
- }
-
- tp = netdev_priv(dev);
-
- assert(ioaddr != NULL);
- assert(dev != NULL);
- assert(tp != NULL);
-
- addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
- for (i = 0; i < 3; i++)
- ((u16 *)(dev->dev_addr))[i] =
- le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
-
- dev->netdev_ops = &netdrv_netdev_ops;
- dev->watchdog_timeo = TX_TIMEOUT;
-
- dev->irq = pdev->irq;
- dev->base_addr = (unsigned long) ioaddr;
-
- /* netdev_priv()/tp zeroed and aligned in alloc_etherdev */
- tp = netdev_priv(dev);
-
- /* note: tp->chipset set in netdrv_init_board */
- tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | NETDRV_CAPS;
- tp->pci_dev = pdev;
- tp->board = ent->driver_data;
- tp->mmio_addr = ioaddr;
- spin_lock_init(&tp->lock);
-
- pci_set_drvdata(pdev, dev);
-
- tp->phys[0] = 32;
-
- netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
- board_info[ent->driver_data].name,
- dev->base_addr, dev->dev_addr, dev->irq);
-
- netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
- rtl_chip_info[tp->chipset].name);
-
- /* Put the chip into low-power mode. */
- NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
-
- /* The lower four bits are the media type. */
- option = (board_idx > 7) ? 0 : media[board_idx];
- if (option > 0) {
- tp->full_duplex = (option & 0x200) ? 1 : 0;
- tp->default_port = option & 15;
- if (tp->default_port)
- tp->medialock = 1;
- }
-
- if (tp->full_duplex) {
- netdev_info(dev, "Media type forced to Full Duplex\n");
- mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
- tp->duplex_lock = 1;
- }
-
- DPRINTK("EXIT - returning 0\n");
- return 0;
-}
-
-
-static void __devexit netdrv_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct netdrv_private *np;
-
- DPRINTK("ENTER\n");
-
- assert(dev != NULL);
-
- np = netdev_priv(dev);
- assert(np != NULL);
-
- unregister_netdev(dev);
-
-#ifndef USE_IO_OPS
- iounmap(np->mmio_addr);
-#endif /* !USE_IO_OPS */
-
- pci_release_regions(pdev);
-
- free_netdev(dev);
-
- pci_set_drvdata(pdev, NULL);
-
- pci_disable_device(pdev);
-
- DPRINTK("EXIT\n");
-}
-
-
-/* Serial EEPROM section. */
-
-/* EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
-#define EE_CS 0x08 /* EEPROM chip select. */
-#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x00
-#define EE_WRITE_1 0x02
-#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
-#define EE_ENB (0x80 | EE_CS)
-
-/* Delay between EEPROM clock transitions.
- No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
-*/
-
-#define eeprom_delay() readl(ee_addr)
-
-/* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD (5)
-#define EE_READ_CMD (6)
-#define EE_ERASE_CMD (7)
-
-static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
-{
- int i;
- unsigned retval = 0;
- void *ee_addr = ioaddr + Cfg9346;
- int read_cmd = location | (EE_READ_CMD << addr_len);
-
- DPRINTK("ENTER\n");
-
- writeb(EE_ENB & ~EE_CS, ee_addr);
- writeb(EE_ENB, ee_addr);
- eeprom_delay();
-
- /* Shift the read command bits out. */
- for (i = 4 + addr_len; i >= 0; i--) {
- int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- writeb(EE_ENB | dataval, ee_addr);
- eeprom_delay();
- writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
- eeprom_delay();
- }
- writeb(EE_ENB, ee_addr);
- eeprom_delay();
-
- for (i = 16; i > 0; i--) {
- writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
- eeprom_delay();
- retval =
- (retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
- 0);
- writeb(EE_ENB, ee_addr);
- eeprom_delay();
- }
-
- /* Terminate the EEPROM access. */
- writeb(~EE_CS, ee_addr);
- eeprom_delay();
-
- DPRINTK("EXIT - returning %d\n", retval);
- return retval;
-}
-
-/* MII serial management: mostly bogus for now. */
-/* Read and write the MII management registers using software-generated
- serial MDIO protocol.
- The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
- met by back-to-back PCI I/O cycles, but we insert a delay to avoid
- "overclocking" issues. */
-#define MDIO_DIR 0x80
-#define MDIO_DATA_OUT 0x04
-#define MDIO_DATA_IN 0x02
-#define MDIO_CLK 0x01
-#define MDIO_WRITE0 (MDIO_DIR)
-#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
-
-#define mdio_delay() readb(mdio_addr)
-
-
-static char mii_2_8139_map[8] = {
- BasicModeCtrl,
- BasicModeStatus,
- 0,
- 0,
- NWayAdvert,
- NWayLPAR,
- NWayExpansion,
- 0
-};
-
-
-/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync(void *mdio_addr)
-{
- int i;
-
- DPRINTK("ENTER\n");
-
- for (i = 32; i >= 0; i--) {
- writeb(MDIO_WRITE1, mdio_addr);
- mdio_delay();
- writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
- mdio_delay();
- }
-
- DPRINTK("EXIT\n");
-}
-
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *mdio_addr = tp->mmio_addr + Config4;
- int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
- int retval = 0;
- int i;
-
- DPRINTK("ENTER\n");
-
- if (phy_id > 31) { /* Really a 8139. Use internal registers. */
- DPRINTK("EXIT after directly using 8139 internal regs\n");
- return location < 8 && mii_2_8139_map[location] ?
- readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
- }
- mdio_sync(mdio_addr);
- /* Shift the read command bits out. */
- for (i = 15; i >= 0; i--) {
- int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
-
- writeb(MDIO_DIR | dataval, mdio_addr);
- mdio_delay();
- writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
- mdio_delay();
- }
-
- /* Read the two transition, 16 data, and wire-idle bits. */
- for (i = 19; i > 0; i--) {
- writeb(0, mdio_addr);
- mdio_delay();
- retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
- ? 1 : 0);
- writeb(MDIO_CLK, mdio_addr);
- mdio_delay();
- }
-
- DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
- return (retval >> 1) & 0xffff;
-}
-
-
-static void mdio_write(struct net_device *dev, int phy_id, int location,
- int value)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *mdio_addr = tp->mmio_addr + Config4;
- int mii_cmd =
- (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
- int i;
-
- DPRINTK("ENTER\n");
-
- if (phy_id > 31) { /* Really a 8139. Use internal registers. */
- if (location < 8 && mii_2_8139_map[location]) {
- writew(value,
- tp->mmio_addr + mii_2_8139_map[location]);
- readw(tp->mmio_addr + mii_2_8139_map[location]);
- }
- DPRINTK("EXIT after directly using 8139 internal regs\n");
- return;
- }
- mdio_sync(mdio_addr);
-
- /* Shift the command bits out. */
- for (i = 31; i >= 0; i--) {
- int dataval =
- (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
- writeb(dataval, mdio_addr);
- mdio_delay();
- writeb(dataval | MDIO_CLK, mdio_addr);
- mdio_delay();
- }
-
- /* Clear out extra bits. */
- for (i = 2; i > 0; i--) {
- writeb(0, mdio_addr);
- mdio_delay();
- writeb(MDIO_CLK, mdio_addr);
- mdio_delay();
- }
-
- DPRINTK("EXIT\n");
-}
-
-
-static int netdrv_open(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- int retval;
- void *ioaddr = tp->mmio_addr;
-
- DPRINTK("ENTER\n");
-
- retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
- if (retval) {
- DPRINTK("EXIT, returning %d\n", retval);
- return retval;
- }
-
- tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
- &tp->tx_bufs_dma);
- tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
- &tp->rx_ring_dma);
- if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
- free_irq(dev->irq, dev);
-
- if (tp->tx_bufs)
- pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
- tp->tx_bufs, tp->tx_bufs_dma);
- if (tp->rx_ring)
- pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
- tp->rx_ring, tp->rx_ring_dma);
-
- DPRINTK("EXIT, returning -ENOMEM\n");
- return -ENOMEM;
-
- }
-
- tp->full_duplex = tp->duplex_lock;
- tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
-
- netdrv_init_ring(dev);
- netdrv_hw_start(dev);
-
- netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
- (unsigned long long)pci_resource_start(tp->pci_dev, 1),
- dev->irq, NETDRV_R8(MediaStatus),
- tp->full_duplex ? "full" : "half");
-
- /* Set the timer to switch to check for link beat and perhaps switch
- to an alternate media type. */
- init_timer(&tp->timer);
- tp->timer.expires = jiffies + 3 * HZ;
- tp->timer.data = (unsigned long) dev;
- tp->timer.function = netdrv_timer;
- add_timer(&tp->timer);
-
- DPRINTK("EXIT, returning 0\n");
- return 0;
-}
-
-
-/* Start the hardware at open or resume. */
-static void netdrv_hw_start(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- u32 i;
-
- DPRINTK("ENTER\n");
-
- /* Soft reset the chip. */
- NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
- udelay(100);
-
- /* Check that the chip has finished the reset. */
- for (i = 1000; i > 0; i--)
- if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
- break;
-
- /* Restore our idea of the MAC address. */
- NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
- NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
-
- /* Must enable Tx/Rx before setting transfer thresholds! */
- NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
- CmdRxEnb | CmdTxEnb);
-
- i = netdrv_rx_config |
- (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
- NETDRV_W32_F(RxConfig, i);
-
- /* Check this value: the documentation for IFG contradicts ifself. */
- NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
-
- /* unlock Config[01234] and BMCR register writes */
- NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
- udelay(10);
-
- tp->cur_rx = 0;
-
- /* Lock Config[01234] and BMCR register writes */
- NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
- udelay(10);
-
- /* init Rx ring buffer DMA address */
- NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
-
- /* init Tx buffer DMA addresses */
- for (i = 0; i < NUM_TX_DESC; i++)
- NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
-
- NETDRV_W32_F(RxMissed, 0);
-
- netdrv_set_rx_mode(dev);
-
- /* no early-rx interrupts */
- NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
-
- /* make sure RxTx has started */
- NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
- CmdRxEnb | CmdTxEnb);
-
- /* Enable all known interrupts by setting the interrupt mask. */
- NETDRV_W16_F(IntrMask, netdrv_intr_mask);
-
- netif_start_queue(dev);
-
- DPRINTK("EXIT\n");
-}
-
-
-/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void netdrv_init_ring(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- int i;
-
- DPRINTK("ENTER\n");
-
- tp->cur_rx = 0;
- atomic_set(&tp->cur_tx, 0);
- atomic_set(&tp->dirty_tx, 0);
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- tp->tx_info[i].skb = NULL;
- tp->tx_info[i].mapping = 0;
- tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
- }
-
- DPRINTK("EXIT\n");
-}
-
-
-static void netdrv_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- int next_tick = 60 * HZ;
- int mii_lpa;
-
- mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
-
- if (!tp->duplex_lock && mii_lpa != 0xffff) {
- int duplex = ((mii_lpa & LPA_100FULL) ||
- (mii_lpa & 0x01C0) == 0x0040);
- if (tp->full_duplex != duplex) {
- tp->full_duplex = duplex;
- netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
- tp->full_duplex ? "full" : "half",
- tp->phys[0], mii_lpa);
- NETDRV_W8(Cfg9346, Cfg9346_Unlock);
- NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
- NETDRV_W8(Cfg9346, Cfg9346_Lock);
- }
- }
-
- netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
- NETDRV_R16(NWayLPAR));
- netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
- NETDRV_R16(IntrMask),
- NETDRV_R16(IntrStatus),
- NETDRV_R32(RxEarlyStatus));
- netdev_dbg(dev, "Chip config %02x %02x\n",
- NETDRV_R8(Config0), NETDRV_R8(Config1));
-
- tp->timer.expires = jiffies + next_tick;
- add_timer(&tp->timer);
-}
-
-
-static void netdrv_tx_clear(struct net_device *dev)
-{
- int i;
- struct netdrv_private *tp = netdev_priv(dev);
-
- atomic_set(&tp->cur_tx, 0);
- atomic_set(&tp->dirty_tx, 0);
-
- /* Dump the unsent Tx packets. */
- for (i = 0; i < NUM_TX_DESC; i++) {
- struct ring_info *rp = &tp->tx_info[i];
- if (rp->mapping != 0) {
- pci_unmap_single(tp->pci_dev, rp->mapping,
- rp->skb->len, PCI_DMA_TODEVICE);
- rp->mapping = 0;
- }
- if (rp->skb) {
- dev_kfree_skb(rp->skb);
- rp->skb = NULL;
- dev->stats.tx_dropped++;
- }
- }
-}
-
-
-static void netdrv_tx_timeout(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- int i;
- u8 tmp8;
- unsigned long flags;
-
- netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
- NETDRV_R8(ChipCmd),
- NETDRV_R16(IntrStatus),
- NETDRV_R8(MediaStatus));
-
- /* disable Tx ASAP, if not already */
- tmp8 = NETDRV_R8(ChipCmd);
- if (tmp8 & CmdTxEnb)
- NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
-
- /* Disable interrupts by clearing the interrupt mask. */
- NETDRV_W16(IntrMask, 0x0000);
-
- /* Emit info to figure out what went wrong. */
- netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
- atomic_read(&tp->cur_tx),
- atomic_read(&tp->dirty_tx));
- for (i = 0; i < NUM_TX_DESC; i++)
- netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
- i, NETDRV_R32(TxStatus0 + (i * 4)),
- i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
- "(queue head)" : "");
-
- /* Stop a shared interrupt from scavenging while we are. */
- spin_lock_irqsave(&tp->lock, flags);
-
- netdrv_tx_clear(dev);
-
- spin_unlock_irqrestore(&tp->lock, flags);
-
- /* ...and finally, reset everything */
- netdrv_hw_start(dev);
-
- netif_wake_queue(dev);
-}
-
-
-
-static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- int entry;
-
- /* Calculate the next Tx descriptor entry. */
- entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
-
- assert(tp->tx_info[entry].skb == NULL);
- assert(tp->tx_info[entry].mapping == 0);
-
- tp->tx_info[entry].skb = skb;
- /* tp->tx_info[entry].mapping = 0; */
- skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
-
- /* Note: the chip doesn't have auto-pad! */
- NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
- tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
-
- atomic_inc(&tp->cur_tx);
- if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
- netif_stop_queue(dev);
-
- netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
- skb->data, skb->len, entry);
-
- return NETDEV_TX_OK;
-}
-
-
-static void netdrv_tx_interrupt(struct net_device *dev,
- struct netdrv_private *tp,
- void *ioaddr)
-{
- int cur_tx, dirty_tx, tx_left;
-
- assert(dev != NULL);
- assert(tp != NULL);
- assert(ioaddr != NULL);
-
- dirty_tx = atomic_read(&tp->dirty_tx);
-
- cur_tx = atomic_read(&tp->cur_tx);
- tx_left = cur_tx - dirty_tx;
- while (tx_left > 0) {
- int entry = dirty_tx % NUM_TX_DESC;
- int txstatus;
-
- txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
-
- if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
- break; /* It still hasn't been Txed */
-
- /* Note: TxCarrierLost is always asserted at 100mbps. */
- if (txstatus & (TxOutOfWindow | TxAborted)) {
- /* There was an major error, log it. */
- netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
- txstatus);
- dev->stats.tx_errors++;
- if (txstatus & TxAborted) {
- dev->stats.tx_aborted_errors++;
- NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
- }
- if (txstatus & TxCarrierLost)
- dev->stats.tx_carrier_errors++;
- if (txstatus & TxOutOfWindow)
- dev->stats.tx_window_errors++;
- } else {
- if (txstatus & TxUnderrun) {
- /* Add 64 to the Tx FIFO threshold. */
- if (tp->tx_flag < 0x00300000)
- tp->tx_flag += 0x00020000;
- dev->stats.tx_fifo_errors++;
- }
- dev->stats.collisions += (txstatus >> 24) & 15;
- dev->stats.tx_bytes += txstatus & 0x7ff;
- dev->stats.tx_packets++;
- }
-
- /* Free the original skb. */
- if (tp->tx_info[entry].mapping != 0) {
- pci_unmap_single(tp->pci_dev,
- tp->tx_info[entry].mapping,
- tp->tx_info[entry].skb->len,
- PCI_DMA_TODEVICE);
- tp->tx_info[entry].mapping = 0;
- }
- dev_kfree_skb_irq(tp->tx_info[entry].skb);
- tp->tx_info[entry].skb = NULL;
- dirty_tx++;
- if (dirty_tx < 0) { /* handle signed int overflow */
- atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
- dirty_tx = cur_tx - tx_left + 1;
- }
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
-
- cur_tx = atomic_read(&tp->cur_tx);
- tx_left = cur_tx - dirty_tx;
-
- }
-
-#ifndef NETDRV_NDEBUG
- if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
- netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
- dirty_tx, atomic_read(&tp->cur_tx));
- dirty_tx += NUM_TX_DESC;
- }
-#endif /* NETDRV_NDEBUG */
-
- atomic_set(&tp->dirty_tx, dirty_tx);
-}
-
-
-/* TODO: clean this up! Rx reset need not be this intensive */
-static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
- struct netdrv_private *tp, void *ioaddr)
-{
- u8 tmp8;
- int tmp_work = 1000;
-
- netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
- if (rx_status & RxTooLong)
- netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
- rx_status);
- /* A.C.: The chip hangs here. */
- dev->stats.rx_errors++;
- if (rx_status & (RxBadSymbol | RxBadAlign))
- dev->stats.rx_frame_errors++;
- if (rx_status & (RxRunt | RxTooLong))
- dev->stats.rx_length_errors++;
- if (rx_status & RxCRCErr)
- dev->stats.rx_crc_errors++;
- /* Reset the receiver, based on RealTek recommendation.(Bug?) */
- tp->cur_rx = 0;
-
- /* disable receive */
- tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
- NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
-
- /* A.C.: Reset the multicast list. */
- netdrv_set_rx_mode(dev);
-
- /* XXX potentially temporary hack to
- * restart hung receiver */
- while (--tmp_work > 0) {
- tmp8 = NETDRV_R8(ChipCmd);
- if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
- break;
- NETDRV_W8_F(ChipCmd,
- (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
- }
-
- /* G.S.: Re-enable receiver */
- /* XXX temporary hack to work around receiver hang */
- netdrv_set_rx_mode(dev);
-
- if (tmp_work <= 0)
- netdev_warn(dev, "tx/rx enable wait too long\n");
-}
-
-
-/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
- field alignments and semantics. */
-static void netdrv_rx_interrupt(struct net_device *dev,
- struct netdrv_private *tp, void *ioaddr)
-{
- unsigned char *rx_ring;
- u16 cur_rx;
-
- assert(dev != NULL);
- assert(tp != NULL);
- assert(ioaddr != NULL);
-
- rx_ring = tp->rx_ring;
- cur_rx = tp->cur_rx;
-
- netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
- cur_rx, NETDRV_R16(RxBufAddr),
- NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
- while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
- int ring_offset = cur_rx % RX_BUF_LEN;
- u32 rx_status;
- unsigned int rx_size;
- unsigned int pkt_size;
- struct sk_buff *skb;
-
- /* read size+status of next frame from DMA ring buffer */
- rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
- rx_size = rx_status >> 16;
- pkt_size = rx_size - 4;
-
- netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
- rx_status, rx_size, cur_rx);
-#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
- print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
- &rx_ring[ring_offset], 70);
-#endif
-
- /* If Rx err or invalid rx_size/rx_status received
- *(which happens if we get lost in the ring),
- * Rx process gets reset, so we abort any further
- * Rx processing.
- */
- if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
- (!(rx_status & RxStatusOK))) {
- netdrv_rx_err(rx_status, dev, tp, ioaddr);
- return;
- }
-
- /* Malloc up new buffer, compatible with net-2e. */
- /* Omit the four octet CRC from the length. */
-
- /* TODO: consider allocating skb's outside of
- * interrupt context, both to speed interrupt processing,
- * and also to reduce the chances of having to
- * drop packets here under memory pressure.
- */
-
- skb = dev_alloc_skb(pkt_size + 2);
- if (skb) {
- skb_reserve(skb, 2); /* 16 byte align the IP fields. */
-
- skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
- skb_put(skb, pkt_size);
-
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_bytes += pkt_size;
- dev->stats.rx_packets++;
- } else {
- netdev_warn(dev, "Memory squeeze, dropping packet\n");
- dev->stats.rx_dropped++;
- }
-
- cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
- NETDRV_W16_F(RxBufPtr, cur_rx - 16);
- }
-
- netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
- cur_rx, NETDRV_R16(RxBufAddr),
- NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
-
- tp->cur_rx = cur_rx;
-}
-
-
-static void netdrv_weird_interrupt(struct net_device *dev,
- struct netdrv_private *tp,
- void *ioaddr,
- int status, int link_changed)
-{
- netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
- status);
-
- assert(dev != NULL);
- assert(tp != NULL);
- assert(ioaddr != NULL);
-
- /* Update the error count. */
- dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
- NETDRV_W32(RxMissed, 0);
-
- if ((status & RxUnderrun) && link_changed &&
- (tp->drv_flags & HAS_LNK_CHNG)) {
- /* Really link-change on new chips. */
- int lpar = NETDRV_R16(NWayLPAR);
- int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
- tp->duplex_lock);
- if (tp->full_duplex != duplex) {
- tp->full_duplex = duplex;
- NETDRV_W8(Cfg9346, Cfg9346_Unlock);
- NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
- NETDRV_W8(Cfg9346, Cfg9346_Lock);
- }
- status &= ~RxUnderrun;
- }
-
- /* XXX along with netdrv_rx_err, are we double-counting errors? */
- if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
- dev->stats.rx_errors++;
-
- if (status & (PCSTimeout))
- dev->stats.rx_length_errors++;
- if (status & (RxUnderrun | RxFIFOOver))
- dev->stats.rx_fifo_errors++;
- if (status & RxOverflow) {
- dev->stats.rx_over_errors++;
- tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
- NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
- }
- if (status & PCIErr) {
- u16 pci_cmd_status;
- pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
-
- netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
- }
-}
-
-
-/* The interrupt handler does all of the Rx thread work and cleans up
- after the Tx thread. */
-static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
-{
- struct net_device *dev = (struct net_device *) dev_instance;
- struct netdrv_private *tp = netdev_priv(dev);
- int boguscnt = max_interrupt_work;
- void *ioaddr = tp->mmio_addr;
- int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
- int handled = 0;
-
- spin_lock(&tp->lock);
-
- do {
- status = NETDRV_R16(IntrStatus);
-
- /* h/w no longer present(hotplug?) or major error, bail */
- if (status == 0xFFFF)
- break;
-
- handled = 1;
- /* Acknowledge all of the current interrupt sources ASAP */
- NETDRV_W16_F(IntrStatus, status);
-
- netdev_dbg(dev, "interrupt status=%#04x new intstat=%#04x\n",
- status, NETDRV_R16(IntrStatus));
-
- if ((status &
- (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
- RxFIFOOver | TxErr | TxOK | RxErr | RxOK)) == 0)
- break;
-
- /* Check uncommon events with one test. */
- if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
- RxFIFOOver | TxErr | RxErr))
- netdrv_weird_interrupt(dev, tp, ioaddr,
- status, link_changed);
-
- if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */
- netdrv_rx_interrupt(dev, tp, ioaddr);
-
- if (status & (TxOK | TxErr))
- netdrv_tx_interrupt(dev, tp, ioaddr);
-
- boguscnt--;
- } while (boguscnt > 0);
-
- if (boguscnt <= 0) {
- netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
- status);
-
- /* Clear all interrupt sources. */
- NETDRV_W16(IntrStatus, 0xffff);
- }
-
- spin_unlock(&tp->lock);
-
- netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
- NETDRV_R16(IntrStatus));
- return IRQ_RETVAL(handled);
-}
-
-
-static int netdrv_close(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- netif_stop_queue(dev);
-
- netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
- NETDRV_R16(IntrStatus));
-
- del_timer_sync(&tp->timer);
-
- spin_lock_irqsave(&tp->lock, flags);
-
- /* Stop the chip's Tx and Rx DMA processes. */
- NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
- /* Disable interrupts by clearing the interrupt mask. */
- NETDRV_W16(IntrMask, 0x0000);
-
- /* Update the error counts. */
- dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
- NETDRV_W32(RxMissed, 0);
-
- spin_unlock_irqrestore(&tp->lock, flags);
-
- free_irq(dev->irq, dev);
-
- netdrv_tx_clear(dev);
-
- pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
- tp->rx_ring, tp->rx_ring_dma);
- pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN,
- tp->tx_bufs, tp->tx_bufs_dma);
- tp->rx_ring = NULL;
- tp->tx_bufs = NULL;
-
- /* Green! Put the chip in low-power mode. */
- NETDRV_W8(Cfg9346, Cfg9346_Unlock);
- NETDRV_W8(Config1, 0x03);
- NETDRV_W8(Cfg9346, Cfg9346_Lock);
-
- DPRINTK("EXIT\n");
- return 0;
-}
-
-
-static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- struct mii_ioctl_data *data = if_mii(rq);
- unsigned long flags;
- int rc = 0;
-
- DPRINTK("ENTER\n");
-
- switch (cmd) {
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- data->phy_id = tp->phys[0] & 0x3f;
- /* Fall Through */
-
- case SIOCGMIIREG: /* Read MII PHY register. */
- spin_lock_irqsave(&tp->lock, flags);
- data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
- spin_unlock_irqrestore(&tp->lock, flags);
- break;
-
- case SIOCSMIIREG: /* Write MII PHY register. */
- spin_lock_irqsave(&tp->lock, flags);
- mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_irqrestore(&tp->lock, flags);
- break;
-
- default:
- rc = -EOPNOTSUPP;
- break;
- }
-
- DPRINTK("EXIT, returning %d\n", rc);
- return rc;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- This routine is not state sensitive and need not be SMP locked. */
-
-static void netdrv_set_rx_mode(struct net_device *dev)
-{
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- u32 mc_filter[2]; /* Multicast hash filter */
- int rx_mode;
- u32 tmp;
-
- DPRINTK("ENTER\n");
-
- netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
- __func__, dev->flags, NETDRV_R32(RxConfig));
-
- /* Note: do not reorder, GCC is clever about common statements. */
- if (dev->flags & IFF_PROMISC) {
- rx_mode =
- AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
- AcceptAllPhys;
- mc_filter[1] = mc_filter[0] = 0xffffffff;
- } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
- (dev->flags & IFF_ALLMULTI)) {
- /* Too many to filter perfectly -- accept all multicasts. */
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
- mc_filter[1] = mc_filter[0] = 0xffffffff;
- } else {
- struct netdev_hw_addr *ha;
-
- rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
- mc_filter[1] = mc_filter[0] = 0;
- netdev_for_each_mc_addr(ha, dev) {
- int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
-
- mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
- }
- }
-
- /* if called from irq handler, lock already acquired */
- if (!in_irq())
- spin_lock_irq(&tp->lock);
-
- /* We can safely update without stopping the chip. */
- tmp = netdrv_rx_config | rx_mode |
- (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
- NETDRV_W32_F(RxConfig, tmp);
- NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
- NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
-
- if (!in_irq())
- spin_unlock_irq(&tp->lock);
-
- DPRINTK("EXIT\n");
-}
-
-
-#ifdef CONFIG_PM
-
-static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct netdrv_private *tp = netdev_priv(dev);
- void *ioaddr = tp->mmio_addr;
- unsigned long flags;
-
- if (!netif_running(dev))
- return 0;
- netif_device_detach(dev);
-
- spin_lock_irqsave(&tp->lock, flags);
-
- /* Disable interrupts, stop Tx and Rx. */
- NETDRV_W16(IntrMask, 0x0000);
- NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
-
- /* Update the error counts. */
- dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
- NETDRV_W32(RxMissed, 0);
-
- spin_unlock_irqrestore(&tp->lock, flags);
-
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-
-static int netdrv_resume(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- /*struct netdrv_private *tp = netdev_priv(dev);*/
-
- if (!netif_running(dev))
- return 0;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- netif_device_attach(dev);
- netdrv_hw_start(dev);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
-
-static struct pci_driver netdrv_pci_driver = {
- .name = MODNAME,
- .id_table = netdrv_pci_tbl,
- .probe = netdrv_init_one,
- .remove = __devexit_p(netdrv_remove_one),
-#ifdef CONFIG_PM
- .suspend = netdrv_suspend,
- .resume = netdrv_resume,
-#endif /* CONFIG_PM */
-};
-
-
-static int __init netdrv_init_module(void)
-{
-/* when a module, this is printed whether or not devices are found in probe */
-#ifdef MODULE
- printk(version);
-#endif
- return pci_register_driver(&netdrv_pci_driver);
-}
-
-
-static void __exit netdrv_cleanup_module(void)
-{
- pci_unregister_driver(&netdrv_pci_driver);
-}
-
-
-module_init(netdrv_init_module);
-module_exit(netdrv_cleanup_module);