Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits)
  Revert "p54: Use SKB list handling helpers instead of by-hand code."
  sctp: fix warning at inet_sock_destruct() while release sctp socket
  tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.
  dsa: fix 88e6xxx statistics counter snapshotting
  forcedeth: Fix NAPI race.
  drivers/net/smsc911x.c: Fix resource size off by 1 error
  pcnet_cs: add new id
  bnx2x: Fix the maximal values of coalescing timeouts.
  bnx2x: Disable HC coalescing when setting timeout to zero.
  tun: Fix device unregister race
  be2net: fix spurious interrupt handling in intx mode
  e1000e: disable K1 at 1000Mbps for 82577/82578
  e1000e: delay second read of PHY_STATUS register on failure of first read
  e1000e: prevent NVM corruption on sectors larger than 4K
  e1000e: do not write SmartSpeed register bits on parts without support
  e1000e: delay after LCD reset and proper checks for PHY configuration done
  e1000e: PHY loopback broken on 82578
  ixgbe: Not allow 8259x unsupported wol options change from ethtool
  ixgbe: fix inconsistent SFP/SFP+ failure results.
  ixgbe: fix regression on some 82598 adapters
  ...

35 files changed, 658 insertions, 259 deletions

diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec5169604a6a..2d91049571a4 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@ struct reply_t gigaset_tab_cid[] =
 	{RSP_OK,      604,604, -1,                605, 5, {ACT_CMD+AT_MSN}},
 	{RSP_OK,      605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
 	{RSP_NULL,    605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      606,606, -1,                607, 5, {0},             "+VLS=17\r"}, /* set "Endgeraetemodus" */
+	{RSP_OK,      606,606, -1,                607, 5, {0}, "+VLS=17\r"},
 	{RSP_OK,      607,607, -1,                608,-1},
-	//{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    608, 0, {ACT_ERROR}},//DELETE
 	{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    609, 5, {ACT_CMD+AT_DIAL}},
 	{RSP_OK,      609,609, -1,                650, 0, {ACT_DIALING}},
 
-	{RSP_ZVLS,    608,608, 17,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCTP,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    609,609, -1,                 -1,-1, {ACT_DEBUG}},
 	{RSP_ERROR,   601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 	{EV_TIMEOUT,  601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
 
-	/* dialing */
-	{RSP_ZCTP,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    650,650, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZSAU,    650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
-
-	/* connection established  */
-	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
-	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+	/* optional dialing responses */
+	{EV_BC_OPEN,  650,650, -1,                651,-1},
+	{RSP_ZVLS,    608,651, 17,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCTP,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZCPN,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
+	{RSP_ZSAU,    650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
+
+	/* connect */
+	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    651,651,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
+	{RSP_ZSAU,    751,751,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
+							   ACT_NOTIFY_BC_UP}},
+	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}},
 
 	/* remote hangup */
-	{RSP_ZSAU,    650,650,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
-	{RSP_ZSAU,    750,750,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
+	{RSP_ZSAU,    650,651,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
+	{RSP_ZSAU,    750,751,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 	{RSP_ZSAU,    800,800,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
 
 	/* hangup */
@@ -358,7 +359,8 @@ struct reply_t gigaset_tab_cid[] =
 	{RSP_ZSAU,    700,729,ZSAU_ACTIVE,          0, 0, {ACT_ABORTACCEPT}},
 	{RSP_ZSAU,    700,729,ZSAU_DISCONNECT_IND,  0, 0, {ACT_ABORTACCEPT}},
 
-	{EV_TIMEOUT,  750,750, -1,                  0, 0, {ACT_CONNTIMEOUT}},
+	{EV_BC_OPEN,  750,750, -1,                751,-1},
+	{EV_TIMEOUT,  750,751, -1,                  0, 0, {ACT_CONNTIMEOUT}},
 
 	/* B channel closed (general case) */
 	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@ static void bchannel_down(struct bc_state *bcs)
 
 static void bchannel_up(struct bc_state *bcs)
 {
-	if (!(bcs->chstate & CHS_D_UP)) {
-		dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
-		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
-	}
-
 	if (bcs->chstate & CHS_B_UP) {
 		dev_notice(bcs->cs->dev, "%s: B channel already up\n",
 			   __func__);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4cd489..bed38fcc432b 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size)
 		pr_err("invalid size %d\n", size);
 		return -EINVAL;
 	}
-	src = iwb->read;
-	if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
-		     (read < src && limit >= src))) {
-		pr_err("isoc write buffer frame reservation violated\n");
-		return -EFAULT;
-	}
 #endif
 
 	if (read < write) {
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805c1db3..29c33c709c6d 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK  	0x7 	/* bits 26 - 28 */
 #define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT	26
 
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 			0xC18
+#define CEV_ISR_SIZE				4
+
 /********* Event Q door bell *************/
 #define DB_EQ_OFFSET			DB_CQ_OFFSET
 #define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 308eb09ca56b..c43f6a119295 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1274,15 +1274,17 @@ static irqreturn_t be_intx(int irq, void *dev)
 {
 	struct be_adapter *adapter = dev;
 	struct be_ctrl_info *ctrl = &adapter->ctrl;
-	int rx, tx;
+        int isr;
 
-	tx = event_handle(ctrl, &adapter->tx_eq);
-	rx = event_handle(ctrl, &adapter->rx_eq);
+	isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+                      ctrl->pci_func * CEV_ISR_SIZE);
+	if (!isr)
+                return IRQ_NONE;
 
-	if (rx || tx)
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
+        event_handle(ctrl, &adapter->tx_eq);
+        event_handle(ctrl, &adapter->rx_eq);
+
+        return IRQ_HANDLED;
 }
 
 static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8678457849f9..85a737c5c23f 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@ struct bnx2x {
 	u16			rx_quick_cons_trip;
 	u16			rx_ticks_int;
 	u16			rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT		(0xf0*12)
 
 	u32			lin_cnt;
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 951714a7f90a..6c67be679764 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4434,7 +4434,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     U_SB_ETH_RX_CQ_INDEX),
-			 bp->rx_ticks ? 0 : 1);
+			 (bp->rx_ticks/12) ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4444,7 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
 						     C_SB_ETH_TX_CQ_INDEX),
-			 bp->tx_ticks ? 0 : 1);
+			 (bp->tx_ticks/12) ? 0 : 1);
 	}
 }
 
@@ -9069,12 +9069,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 
 	bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
-	if (bp->rx_ticks > 3000)
-		bp->rx_ticks = 3000;
+	if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
-	if (bp->tx_ticks > 0x3000)
-		bp->tx_ticks = 0x3000;
+	if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+		bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
 
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97e1120..c0f185beb8bc 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA      0x00000400      /* PHY Reset Asserted */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
 
 /* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
 #define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
 
+#define PHY_CONTROL_LB   0x4000 /* PHY Loopback bit */
+
 /* NVM Control */
 #define E1000_EECD_SK        0x00000001 /* NVM Clock */
 #define E1000_EECD_CS        0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0cfee7..fd44d9f90769 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@ enum e1e_registers {
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
 	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
+	E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -302,6 +303,9 @@ enum e1e_registers {
 #define E1000_KMRNCTRLSTA_REN		0x00200000
 #define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
 #define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE	0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE	0x1400
 
 #define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
 #define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50fb9cd..d56c7473144a 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,6 +338,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+	union ich8_hws_flash_status hsfsts;
 	u32 gfpreg;
 	u32 sector_base_addr;
 	u32 sector_end_addr;
@@ -374,6 +375,20 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 	/* Adjust to word count */
 	nvm->flash_bank_size /= sizeof(u16);
 
+	/*
+	 * Make sure the flash bank size does not overwrite the 4k
+	 * sector ranges. We may have 64k allotted to us but we only care
+	 * about the first 2 4k sectors. Therefore, if we have anything less
+	 * than 64k set in the HSFSTS register, we will reduce the bank size
+	 * down to 4k and let the rest remain unused. If berasesz == 3, then
+	 * we are working in 64k mode. Otherwise we are not.
+	 */
+	if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
+		hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+		if (hsfsts.hsf_status.berasesz != 3)
+			nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
+	}
+
 	nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
 
 	/* Clear shadow ram */
@@ -446,6 +461,95 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	return 0;
 }
 
+/**
+ *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ *  @hw: pointer to the HW structure
+ *
+ *  Checks to see of the link status of the hardware has changed.  If a
+ *  change in link status has been detected, then we read the PHY registers
+ *  to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+	struct e1000_mac_info *mac = &hw->mac;
+	s32 ret_val;
+	bool link;
+
+	/*
+	 * We only want to go out to the PHY registers to see if Auto-Neg
+	 * has completed and/or if our link status has changed.  The
+	 * get_link_status flag is set upon receiving a Link Status
+	 * Change or Rx Sequence Error interrupt.
+	 */
+	if (!mac->get_link_status) {
+		ret_val = 0;
+		goto out;
+	}
+
+	if (hw->mac.type == e1000_pchlan) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                   E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                   E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * First we want to see if the MII Status Register reports
+	 * link.  If so, then we want to get the current speed/duplex
+	 * of the PHY.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link)
+		goto out; /* No link detected */
+
+	mac->get_link_status = false;
+
+	if (hw->phy.type == e1000_phy_82578) {
+		ret_val = e1000_link_stall_workaround_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
+	/*
+	 * Check if there was DownShift, must be checked
+	 * immediately after link-up
+	 */
+	e1000e_check_downshift(hw);
+
+	/*
+	 * If we are forcing speed/duplex, then we simply return since
+	 * we have already determined whether we have link or not.
+	 */
+	if (!mac->autoneg) {
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	/*
+	 * Auto-Neg is enabled.  Auto Speed Detection takes care
+	 * of MAC speed/duplex configuration.  So we only need to
+	 * configure Collision Distance in the MAC.
+	 */
+	e1000e_config_collision_dist(hw);
+
+	/*
+	 * Configure Flow Control now that Auto-Neg has completed.
+	 * First, we need to restore the desired flow control
+	 * settings because we may have had to re-autoneg with a
+	 * different link partner.
+	 */
+	ret_val = e1000e_config_fc_after_link_up(hw);
+	if (ret_val)
+		hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+	return ret_val;
+}
+
 static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -694,6 +798,38 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_lan_init_done_ich8lan - Check for PHY config completion
+ *  @hw: pointer to the HW structure
+ *
+ *  Check the appropriate indication the MAC has finished configuring the
+ *  PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+	u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+	/* Wait for basic configuration completes before proceeding */
+	do {
+		data = er32(STATUS);
+		data &= E1000_STATUS_LAN_INIT_DONE;
+		udelay(100);
+	} while ((!data) && --loop);
+
+	/*
+	 * If basic configuration is incomplete before the above loop
+	 * count reaches 0, loading the configuration from NVM will
+	 * leave the PHY in a bad state possibly resulting in no link.
+	 */
+	if (loop == 0)
+		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+	/* Clear the Init Done bit for the next init event */
+	data = er32(STATUS);
+	data &= ~E1000_STATUS_LAN_INIT_DONE;
+	ew32(STATUS, data);
+}
+
+/**
  *  e1000_phy_hw_reset_ich8lan - Performs a PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -707,13 +843,15 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 	u32 i;
 	u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
 	s32 ret_val;
-	u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
 	ret_val = e1000e_phy_hw_reset_generic(hw);
 	if (ret_val)
 		return ret_val;
 
+	/* Allow time for h/w to get to a quiescent state after reset */
+	mdelay(10);
+
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
@@ -741,26 +879,8 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 		if (!(data & sw_cfg_mask))
 			return 0;
 
-		/* Wait for basic configuration completes before proceeding*/
-		do {
-			data = er32(STATUS);
-			data &= E1000_STATUS_LAN_INIT_DONE;
-			udelay(100);
-		} while ((!data) && --loop);
-
-		/*
-		 * If basic configuration is incomplete before the above loop
-		 * count reaches 0, loading the configuration from NVM will
-		 * leave the PHY in a bad state possibly resulting in no link.
-		 */
-		if (loop == 0) {
-			hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
-		}
-
-		/* Clear the Init Done bit for the next init event */
-		data = er32(STATUS);
-		data &= ~E1000_STATUS_LAN_INIT_DONE;
-		ew32(STATUS, data);
+		/* Wait for basic configuration completes before proceeding */
+		e1000_lan_init_done_ich8lan(hw);
 
 		/*
 		 * Make sure HW does not configure LCD from PHY
@@ -961,12 +1081,14 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1101,9 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1038,6 +1163,10 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 	if (!active) {
 		phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
+
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
 		 * during Dx states where the power conservation is most
@@ -1073,12 +1202,14 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
 		ew32(PHY_CTRL, phy_ctrl);
 
+		if (phy->type != e1000_phy_igp_3)
+			return 0;
+
 		/*
 		 * Call gig speed drop workaround on LPLU before accessing
 		 * any PHY registers
 		 */
-		if ((hw->mac.type == e1000_ich8lan) &&
-		    (hw->phy.type == e1000_phy_igp_3))
+		if (hw->mac.type == e1000_ich8lan)
 			e1000e_gig_downshift_workaround_ich8lan(hw);
 
 		/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1905,7 +2036,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 		break;
 	case 1:
 		sector_size = ICH_FLASH_SEG_SIZE_4K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+		iteration = 1;
 		break;
 	case 2:
 		if (hw->mac.type == e1000_ich9lan) {
@@ -1917,7 +2048,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 		break;
 	case 3:
 		sector_size = ICH_FLASH_SEG_SIZE_64K;
-		iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+		iteration = 1;
 		break;
 	default:
 		return -E1000_ERR_NVM;
@@ -2143,6 +2274,12 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ctrl = er32(CTRL);
 
 	if (!e1000_check_reset_block(hw)) {
+		/* Clear PHY Reset Asserted bit */
+		if (hw->mac.type >= e1000_pchlan) {
+			u32 status = er32(STATUS);
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		}
+
 		/*
 		 * PHY HW reset requires MAC CORE reset at the same
 		 * time to make sure the interface between MAC and the
@@ -2156,23 +2293,34 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	if (!ret_val) {
-		/* release the swflag because it is not reset by
-		 * hardware reset
-		 */
+	if (!ret_val)
 		e1000_release_swflag_ich8lan(hw);
-	}
 
-	ret_val = e1000e_get_auto_rd_done(hw);
-	if (ret_val) {
-		/*
-		 * When auto config read does not complete, do not
-		 * return with an error. This can happen in situations
-		 * where there is no eeprom and prevents getting link.
-		 */
-		hw_dbg(hw, "Auto Read Done did not complete\n");
+	if (ctrl & E1000_CTRL_PHY_RST)
+		ret_val = hw->phy.ops.get_cfg_done(hw);
+
+	if (hw->mac.type >= e1000_ich10lan) {
+		e1000_lan_init_done_ich8lan(hw);
+	} else {
+		ret_val = e1000e_get_auto_rd_done(hw);
+		if (ret_val) {
+			/*
+			 * When auto config read does not complete, do not
+			 * return with an error. This can happen in situations
+			 * where there is no eeprom and prevents getting link.
+			 */
+			hw_dbg(hw, "Auto Read Done did not complete\n");
+		}
 	}
 
+	/*
+	 * For PCH, this write will make sure that any noise
+	 * will be detected as a CRC error and be dropped rather than show up
+	 * as a bad packet to the DMA engine.
+	 */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(CRC_OFFSET, 0x65656565);
+
 	ew32(IMC, 0xffffffff);
 	icr = er32(ICR);
 
@@ -2222,6 +2370,18 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
+	/*
+	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
+	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
+	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
+	 */
+	if (hw->phy.type == e1000_phy_82578) {
+		hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+		ret_val = e1000_phy_hw_reset_ich8lan(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Setup link and flow control */
 	ret_val = e1000_setup_link_ich8lan(hw);
 
@@ -2254,16 +2414,6 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	ew32(CTRL_EXT, ctrl_ext);
 
 	/*
-	 * The 82578 Rx buffer will stall if wakeup is enabled in host and
-	 * the ME.  Reading the BM_WUC register will clear the host wakeup bit.
-	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
-	 */
-	if (hw->phy.type == e1000_phy_82578) {
-		e1e_rphy(hw, BM_WUC, &i);
-		e1000e_phy_hw_reset_generic(hw);
-	}
-
-	/*
 	 * Clear all of the statistics registers (clear on read).  It is
 	 * important that we do this after we have tried to establish link
 	 * because the symbol error count will increment wildly if there
@@ -2485,6 +2635,14 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
 	if (ret_val)
 		return ret_val;
 
+	if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+		ret_val = e1000e_write_kmrn_reg(hw,
+		                                  E1000_KMRNCTRLSTA_K1_CONFIG,
+		                                  E1000_KMRNCTRLSTA_K1_DISABLE);
+		if (ret_val)
+			return ret_val;
+	}
+
 	if ((hw->mac.type == e1000_ich8lan) &&
 	    (hw->phy.type == e1000_phy_igp_3) &&
 	    (*speed == SPEED_1000)) {
@@ -2850,6 +3008,16 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 {
 	u32 bank = 0;
 
+	if (hw->mac.type >= e1000_pchlan) {
+		u32 status = er32(STATUS);
+
+		if (status & E1000_STATUS_PHYRA)
+			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+		else
+			hw_dbg(hw,
+			       "PHY Reset Asserted not set - needs delay\n");
+	}
+
 	e1000e_get_cfg_done(hw);
 
 	/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3089,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 static struct e1000_mac_operations ich8_mac_ops = {
 	.id_led_init		= e1000e_id_led_init,
 	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
-	.check_for_link		= e1000e_check_for_copper_link,
+	.check_for_link		= e1000_check_for_copper_link_ich8lan,
 	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
 	.get_bus_info		= e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e990374..99ba2b8a2a05 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 
 	mac->get_link_status = 0;
 
-	if (hw->phy.type == e1000_phy_82578) {
-		ret_val = e1000_link_stall_workaround_hv(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
 	/*
 	 * Check if there was DownShift, must be checked
 	 * immediately after link-up
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459cf3d0e..994401fd0664 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 		 */
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
-			break;
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
 		ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
 			break;
@@ -2737,6 +2742,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	if (hw->phy.type != e1000_phy_82578)
 		goto out;
 
+	/* Do not apply workaround if in PHY loopback bit 14 set */
+	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	if (data & PHY_CONTROL_LB)
+		goto out;
+
 	/* check if link is up and at 1Gbps */
 	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d292630f..3b4e0766c7b2 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 
 #else
 	do
@@ -3615,12 +3617,13 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 	nv_msi_workaround(np);
 
 #ifdef CONFIG_FORCEDETH_NAPI
-	napi_schedule(&np->napi);
-
-	/* Disable furthur irq's
-	   (msix not enabled with napi) */
-	writel(0, base + NvRegIrqMask);
-
+	if (napi_schedule_prep(&np->napi)) {
+		/*
+		 * Disable further irq's (msix not enabled with napi)
+		 */
+		writel(0, base + NvRegIrqMask);
+		__napi_schedule(&np->napi);
+	}
 #else
 	do
 	{
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0f7b6a3a2e68..2a978008fd6e 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1830,7 +1830,6 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
 		break;
 	default:
 		wol->supported = 0;
-		retval = 0;
 	}
 
 	return retval;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 5588ef493a3d..a3061aacffd8 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2697,19 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
 	/*
 	 * For hot-pluggable SFP+ devices, a new SFP+ module may have
-	 * arrived before interrupts were enabled.  We need to kick off
-	 * the SFP+ module setup first, then try to bring up link.
+	 * arrived before interrupts were enabled but after probe.  Such
+	 * devices wouldn't have their type identified yet. We need to
+	 * kick off the SFP+ module setup first, then try to bring up link.
 	 * If we're not hot-pluggable SFP+, we just need to configure link
 	 * and bring it up.
 	 */
-	err = hw->phy.ops.identify(hw);
-	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to initialize because "
-			"an unsupported SFP+ module type was detected.\n"
-			"Reload the driver after installing a supported "
-			"module.\n");
-		ixgbe_down(adapter);
-		return err;
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		err = hw->phy.ops.identify(hw);
+		if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+			/*
+			 * Take the device down and schedule the sfp tasklet
+			 * which will unregister_netdev and log it.
+			 */
+			ixgbe_down(adapter);
+			schedule_work(&adapter->sfp_config_module_task);
+			return err;
+		}
 	}
 
 	if (ixgbe_is_sfp(hw)) {
@@ -3724,7 +3728,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
 	if ((hw->phy.type == ixgbe_phy_nl) &&
 	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
 		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret)
+		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
@@ -4534,13 +4538,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 	u32 err;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+	/* Time for electrical oscillations to settle down */
+	msleep(100);
 	err = hw->phy.ops.identify_sfp(hw);
+
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
 		dev_err(&adapter->pdev->dev, "failed to initialize because "
 			"an unsupported SFP+ module type was detected.\n"
 			"Reload the driver after installing a supported "
 			"module.\n");
-		ixgbe_down(adapter);
+		unregister_netdev(adapter->netdev);
 		return;
 	}
 	hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966762f0..9ecad17522c3 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
@@ -68,6 +69,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 				break;
 			}
 		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
 	} else {
 		status = 0;
 	}
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cedeb5f37..e1cdba752e09 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
 #define _NETXEN_NIC_LINUX_SUBVERSION 30
 #define NETXEN_NIC_LINUX_VERSIONID  "4.0.30"
 
-#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
+#define _major(v)	(((v) >> 24) & 0xff)
+#define _minor(v)	(((v) >> 16) & 0xff)
+#define _build(v)	((v) & 0xffff)
+
+/* version in image has weird encoding:
+ *  7:0  - major
+ * 15:8  - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+	NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
 
 #define NETXEN_NUM_FLASH_SECTORS (64)
 #define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -614,6 +625,7 @@ struct netxen_new_user_info {
 #define NX_P2_MN_ROMIMAGE	0
 #define NX_P3_CT_ROMIMAGE	1
 #define NX_P3_MN_ROMIMAGE	2
+#define NX_FLASH_ROMIMAGE	3
 
 #define NETXEN_USER_START_OLD NETXEN_PXE_START	/* for backward compatibility */
 
@@ -1243,7 +1255,7 @@ struct netxen_adapter {
 	u32 resv3;
 
 	u8 has_link_events;
-	u8 resv1;
+	u8 fw_type;
 	u16 tx_context_id;
 	u16 mtu;
 	u16 is_up;
@@ -1387,6 +1399,7 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter);
 int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
 int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
 int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc047844af3..824103675648 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@ enum {
 #define NX_PEG_TUNE_CAPABILITY		(NETXEN_CAM_RAM(0x02c))
 
 #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL		(0x14)
+#define NETXEN_PEG_ALIVE_COUNTER	(NETXEN_CAM_RAM(0xb0))
 
 #define	ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
 #define ISR_LEGACY_INT_TRIGGERED(VAL)	(((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61d6e77..b899bd51fcd8 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -684,11 +684,84 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 }
 
 int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+	u32 count, old_count;
+	u32 val, version, major, minor, build;
+	int i, timeout;
+	u8 fw_type;
+
+	/* NX2031 firmware doesn't support heartbit */
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+		return 1;
+
+	/* last attempt had failed */
+	if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+		return 1;
+
+	old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+	for (i = 0; i < 10; i++) {
+
+		timeout = msleep_interruptible(200);
+		if (timeout) {
+			NXWR32(adapter, CRB_CMDPEG_STATE,
+					PHAN_INITIALIZE_FAILED);
+			return -EINTR;
+		}
+
+		count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+		if (count != old_count)
+			break;
+	}
+
+	/* firmware is dead */
+	if (count == old_count)
+		return 1;
+
+	/* check if we have got newer or different file firmware */
+	if (adapter->fw) {
+
+		const struct firmware *fw = adapter->fw;
+
+		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+		version = NETXEN_DECODE_VERSION(val);
+
+		major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+		minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+		build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+		if (version > NETXEN_VERSION_CODE(major, minor, build))
+			return 1;
+
+		if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+			val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+			fw_type = (val & 0x4) ?
+				NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+			if (adapter->fw_type != fw_type)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+static char *fw_name[] = {
+	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
 netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	u64 *ptr64;
 	u32 i, flashaddr, size;
 	const struct firmware *fw = adapter->fw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	dev_info(&pdev->dev, "loading firmware from %s\n",
+			fw_name[adapter->fw_type]);
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +829,7 @@ static int
 netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 {
 	__le32 val;
-	u32 major, minor, build, ver, min_ver, bios;
+	u32 ver, min_ver, bios;
 	struct pci_dev *pdev = adapter->pdev;
 	const struct firmware *fw = adapter->fw;
 
@@ -768,21 +841,18 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 		return -EINVAL;
 
 	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
 	else
 		min_ver = NETXEN_VERSION_CODE(3, 4, 216);
 
-	ver = NETXEN_VERSION_CODE(major, minor, build);
+	ver = NETXEN_DECODE_VERSION(val);
 
-	if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+	if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
 		dev_err(&pdev->dev,
 				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, major, minor, build);
+				fwname, _major(ver), _minor(ver), _build(ver));
 		return -EINVAL;
 	}
 
@@ -798,22 +868,21 @@ netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
 	if (netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&val))
 		return -EIO;
-	major = (__force u32)val & 0xff;
-	minor = ((__force u32)val >> 8) & 0xff;
-	build = (__force u32)val >> 16;
-	if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+	val = NETXEN_DECODE_VERSION(val);
+	if (val > ver) {
+		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+				fwname);
 		return -EINVAL;
+	}
 
 	NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
 	return 0;
 }
 
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
 void netxen_request_firmware(struct netxen_adapter *adapter)
 {
 	u32 capability, flashed_ver;
-	int fw_type;
+	u8 fw_type;
 	struct pci_dev *pdev = adapter->pdev;
 	int rc = 0;
 
@@ -830,6 +899,8 @@ request_mn:
 
 	netxen_rom_fast_read(adapter,
 			NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+	flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
 	if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
 		capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
 		if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +909,10 @@ request_mn:
 		}
 	}
 
+	fw_type = NX_FLASH_ROMIMAGE;
+	adapter->fw = NULL;
+	goto done;
+
 request_fw:
 	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
 	if (rc != 0) {
@@ -846,6 +921,7 @@ request_fw:
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
@@ -859,16 +935,13 @@ request_fw:
 			goto request_mn;
 		}
 
+		fw_type = NX_FLASH_ROMIMAGE;
 		adapter->fw = NULL;
 		goto done;
 	}
 
 done:
-	if (adapter->fw)
-		dev_info(&pdev->dev, "loading firmware from file %s\n",
-				fw_name[fw_type]);
-	else
-		dev_info(&pdev->dev, "loading firmware from flash\n");
+	adapter->fw_type = fw_type;
 }
 
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d12bf4..27539ddf94c4 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -718,6 +718,10 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw)
 	if (request_fw)
 		netxen_request_firmware(adapter);
 
+	err = netxen_need_fw_reset(adapter);
+	if (err <= 0)
+		return err;
+
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
 		netxen_pinit_from_rom(adapter, 0);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a36888361..9ef1c1bfa83d 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
 	PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
 	PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
 	PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
 	PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cbd978e..eda94fcd4065 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@ static void phy_state_machine(struct work_struct *work)
 				 * Otherwise, it's 0, and we're
 				 * still waiting for AN */
 				if (err > 0) {
-					phydev->state = PHY_RUNNING;
+					err = phy_read_status(phydev);
+					if (err)
+						break;
+
+					if (phydev->link) {
+						phydev->state = PHY_RUNNING;
+						netif_carrier_on(phydev->attached_dev);
+					} else
+						phydev->state = PHY_NOLINK;
+					phydev->adjust_link(phydev->attached_dev);
 				} else {
 					phydev->state = PHY_AN;
 					phydev->link_timeout = PHY_AN_TIMEOUT;
 				}
-			} else
-				phydev->state = PHY_RUNNING;
+			} else {
+				err = phy_read_status(phydev);
+				if (err)
+					break;
+
+				if (phydev->link) {
+					phydev->state = PHY_RUNNING;
+					netif_carrier_on(phydev->attached_dev);
+				} else
+					phydev->state = PHY_NOLINK;
+				phydev->adjust_link(phydev->attached_dev);
+			}
 			break;
 	}
 
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e8905d..6ed5317ab1c0 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe79770..eb6a9ee640ed 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->tx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@ static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 			cqicb->pkt_delay =
 			    cpu_to_le16(qdev->rx_max_coalesced_frames);
 			cqicb->flags = FLAGS_LI;
-			status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+			status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
 						CFG_LCQ, rx_ring->cq_id);
 			if (status) {
 				QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76c0e8b..5768af17f168 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 		return -ENOMEM;
 	}
 
+	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+	if (status)
+		return status;
+
 	status = ql_wait_cfg(qdev, bit);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 		goto exit;
 	}
 
-	status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
-	if (status)
-		goto exit;
 	ql_write32(qdev, ICB_L, (u32) map);
 	ql_write32(qdev, ICB_H, (u32) (map >> 32));
-	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 
 	mask = CFG_Q_MASK | (bit << 16);
 	value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@ int ql_write_cfg(struct ql_adapter *qdev, void *ptr, int size, u32 bit,
 	 */
 	status = ql_wait_cfg(qdev, bit);
 exit:
+	ql_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
 	pci_unmap_single(qdev->pdev, map, size, direction);
 	return status;
 }
@@ -412,6 +413,57 @@ exit:
 	return status;
 }
 
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+	int status;
+	char zero_mac_addr[ETH_ALEN];
+	char *addr;
+
+	if (set) {
+		addr = &qdev->ndev->dev_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+			"Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+			addr[0], addr[1], addr[2], addr[3],
+			addr[4], addr[5]);
+	} else {
+		memset(zero_mac_addr, 0, ETH_ALEN);
+		addr = &zero_mac_addr[0];
+		QPRINTK(qdev, IFUP, DEBUG,
+				"Clearing MAC address on %s\n",
+				qdev->ndev->name);
+	}
+	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+	status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+			MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+			"address.\n");
+	return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+				 qdev->ndev->name);
+	netif_carrier_on(qdev->ndev);
+	ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+	QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+				 qdev->ndev->name);
+	netif_carrier_off(qdev->ndev);
+	ql_set_mac_addr(qdev, 0);
+}
+
 /* Get a specific frame routing value from the CAM.
  * Used for debug and reg dump.
  */
@@ -1628,7 +1680,7 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
 	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
 	ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
-	qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+	qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
 	qdev->stats.tx_packets++;
 	dev_kfree_skb(tx_ring_desc->skb);
 	tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
 /* Fire up a handler to reset the MPI processor. */
 void ql_queue_fw_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
 }
 
 void ql_queue_asic_error(struct ql_adapter *qdev)
 {
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 	ql_disable_interrupts(qdev);
 	/* Clear adapter up bit to signal the recovery
 	 * process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@ static int qlge_send(struct sk_buff *skb, struct net_device *ndev)
 	}
 	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
 	mac_iocb_ptr = tx_ring_desc->queue_entry;
-	memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+	memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
 
 	mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
 	mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@ static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
 
 	ql_init_tx_ring(qdev, tx_ring);
 
-	err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+	err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
 			   (u16) tx_ring->wq_id);
 	if (err) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@ static int ql_start_rss(struct ql_adapter *qdev)
 	int i;
 	u8 *hash_id = (u8 *) ricb->hash_cq_id;
 
-	memset((void *)ricb, 0, sizeof(ricb));
+	memset((void *)ricb, 0, sizeof(*ricb));
 
 	ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
 	ricb->flags =
@@ -3030,7 +3082,7 @@ static int ql_start_rss(struct ql_adapter *qdev)
 
 	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
 
-	status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+	status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
 		return status;
@@ -3039,25 +3091,40 @@ static int ql_start_rss(struct ql_adapter *qdev)
 	return status;
 }
 
-/* Initialize the frame-to-queue routing. */
-static int ql_route_initialize(struct ql_adapter *qdev)
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
 {
-	int status = 0;
-	int i;
+	int i, status = 0;
 
 	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
 	if (status)
 		return status;
-
 	/* Clear all the entries in the routing table. */
 	for (i = 0; i < 16; i++) {
 		status = ql_set_routing_reg(qdev, i, 0, 0);
 		if (status) {
 			QPRINTK(qdev, IFUP, ERR,
-				"Failed to init routing register for CAM packets.\n");
-			goto exit;
+				"Failed to init routing register for CAM "
+				"packets.\n");
+			break;
 		}
 	}
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Initialize the frame-to-queue routing. */
+static int ql_route_initialize(struct ql_adapter *qdev)
+{
+	int status = 0;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
+	if (status)
+		goto exit;
 
 	status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
 	if (status) {
@@ -3096,14 +3163,15 @@ exit:
 
 int ql_cam_route_initialize(struct ql_adapter *qdev)
 {
-	int status;
+	int status, set;
 
-	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
-	if (status)
-		return status;
-	status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
-			     MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
-	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	/* If check if the link is up and use to
+	 * determine if we are setting or clearing
+	 * the MAC address in the CAM.
+	 */
+	set = ql_read32(qdev, STS);
+	set &= qdev->port_link_up;
+	status = ql_set_mac_addr(qdev, set);
 	if (status) {
 		QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
 		return status;
@@ -3210,9 +3278,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 {
 	u32 value;
 	int status = 0;
-	unsigned long end_jiffies = jiffies +
-		max((unsigned long)1, usecs_to_jiffies(30));
+	unsigned long end_jiffies;
 
+	/* Clear all the entries in the routing table. */
+	status = ql_clear_routing_entries(qdev);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+		return status;
+	}
+
+	end_jiffies = jiffies +
+		max((unsigned long)1, usecs_to_jiffies(30));
 	ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
 
 	do {
@@ -3252,7 +3328,7 @@ static int ql_adapter_down(struct ql_adapter *qdev)
 	int i, status = 0;
 	struct rx_ring *rx_ring;
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 
 	/* Don't kill the reset worker thread if we
 	 * are in the process of recovery.
@@ -3319,8 +3395,12 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
 	ql_alloc_rx_buffers(qdev);
-	if ((ql_read32(qdev, STS) & qdev->port_init))
-		netif_carrier_on(qdev->ndev);
+	/* If the port is initialized and the
+	 * link is up the turn on the carrier.
+	 */
+	if ((ql_read32(qdev, STS) & qdev->port_init) &&
+			(ql_read32(qdev, STS) & qdev->port_link_up))
+		ql_link_on(qdev);
 	ql_enable_interrupts(qdev);
 	ql_enable_all_completion_interrupts(qdev);
 	netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@ static int ql_get_adapter_resources(struct ql_adapter *qdev)
 		return -ENOMEM;
 	}
 	status = ql_request_irq(qdev);
-	if (status)
-		goto err_irq;
-	return status;
-err_irq:
-	ql_free_mem_resources(qdev);
 	return status;
 }
 
@@ -3414,7 +3489,7 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
-		memset((void *)tx_ring, 0, sizeof(tx_ring));
+		memset((void *)tx_ring, 0, sizeof(*tx_ring));
 		tx_ring->qdev = qdev;
 		tx_ring->wq_id = i;
 		tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		rx_ring = &qdev->rx_ring[i];
-		memset((void *)rx_ring, 0, sizeof(rx_ring));
+		memset((void *)rx_ring, 0, sizeof(*rx_ring));
 		rx_ring->qdev = qdev;
 		rx_ring->cq_id = i;
 		rx_ring->cpu = i % cpu_cnt;	/* CPU to run handler on. */
@@ -3789,7 +3864,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	int pos, err = 0;
 	u16 val16;
 
-	memset((void *)qdev, 0, sizeof(qdev));
+	memset((void *)qdev, 0, sizeof(*qdev));
 	err = pci_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 		pci_disable_device(pdev);
 		return err;
 	}
-	netif_carrier_off(ndev);
+	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
 	cards_found++;
 	return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8b9c50..6685bd97da91 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 				&qdev->mpi_port_cfg_work, 0);
 	}
 
-	netif_carrier_on(qdev->ndev);
+	ql_link_on(qdev);
 }
 
 static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	if (status)
 		QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
 
-	netif_carrier_off(qdev->ndev);
+	ql_link_off(qdev);
 }
 
 static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@ void ql_mpi_idc_work(struct work_struct *work)
 	case MB_CMD_PORT_RESET:
 	case MB_CMD_SET_PORT_CFG:
 	case MB_CMD_STOP_FW:
-		netif_carrier_off(qdev->ndev);
+		ql_link_off(qdev);
 		/* Signal the resulting link up AEN
 		 * that the frame routing and mac addr
 		 * needs to be set.
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639bd181b..66067f9d91c0 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1938,7 +1938,7 @@ static int __devexit smsc911x_drv_remove(struct platform_device *pdev)
 	if (!res)
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 
 	iounmap(pdata->ioaddr);
 
@@ -1976,7 +1976,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 		retval = -ENODEV;
 		goto out_0;
 	}
-	res_size = res->end - res->start + 1;
+	res_size = resource_size(res);
 
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
@@ -2104,7 +2104,7 @@ out_unmap_io_3:
 out_free_netdev_2:
 	free_netdev(dev);
 out_release_io_1:
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 out_0:
 	return retval;
 }
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba47b677..027f7aba26af 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun = __tun_get(tfile);
-	struct sock *sk = tun->sk;
+	struct sock *sk;
 	unsigned int mask = 0;
 
 	if (!tun)
 		return POLLERR;
 
+	sk = tun->sk;
+
 	DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
 
 	poll_wait(file, &tun->socket.wait, wait);
@@ -1324,20 +1326,22 @@ static int tun_chr_close(struct inode *inode, struct file *file)
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
 
-
-	rtnl_lock();
 	tun = __tun_get(tfile);
 	if (tun) {
-		DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+		struct net_device *dev = tun->dev;
+
+		DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
 
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
-		if (!(tun->flags & TUN_PERSIST))
-			unregister_netdevice(tun->dev);
-
+		if (!(tun->flags & TUN_PERSIST)) {
+			rtnl_lock();
+			if (dev->reg_state == NETREG_REGISTERED)
+				unregister_netdevice(dev);
+			rtnl_unlock();
+		}
 	}
-	rtnl_unlock();
 
 	tun = tfile->tun;
 	if (tun)
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd14583f..48d81d98e12d 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_tx_info *range;
 	unsigned long flags;
 
-	if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+	if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
 		return;
 
-	/* There used to be a check here to see if the SKB was on the
-	 * TX queue or not.  This can never happen because all SKBs we
-	 * see here successfully went through p54_assign_address()
-	 * which means the SKB is on the ->tx_queue.
+	/*
+	 * don't try to free an already unlinked skb
 	 */
+	if (unlikely((!skb->next) || (!skb->prev)))
+		return;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	info = IEEE80211_SKB_CB(skb);
 	range = (void *)info->rate_driver_data;
-	if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+	if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->prev);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
-	if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+	if (skb->next != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *ni;
 		struct p54_tx_info *mr;
 
-		ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+		ni = IEEE80211_SKB_CB(skb->next);
 		mr = (struct p54_tx_info *)ni->rate_driver_data;
 	}
 	__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@ static struct sk_buff *p54_find_tx_entry(struct ieee80211_hw *dev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
 		if (hdr->req_id == req_id) {
 			spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 			return entry;
 		}
+		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 	return NULL;
@@ -888,22 +890,24 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = (struct sk_buff *) priv->tx_queue.next;
+	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
 		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
-		if (range->start_addr != addr)
+		if (range->start_addr != addr) {
+			entry = entry->next;
 			continue;
+		}
 
-		if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+		if (entry->next != (struct sk_buff *)&priv->tx_queue) {
 			struct ieee80211_tx_info *ni;
 			struct p54_tx_info *mr;
 
-			ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
-							     entry));
+			ni = IEEE80211_SKB_CB(entry->next);
 			mr = (struct p54_tx_info *)ni->rate_driver_data;
 		}
 
@@ -1164,21 +1168,23 @@ static int p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		}
 	}
 
-	skb_queue_walk(&priv->tx_queue, entry) {
+	entry = priv->tx_queue.next;
+	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
 		range = (void *)info->rate_driver_data;
 		hole_size = range->start_addr - last_addr;
 		if (!target_skb && hole_size >= len) {
-			target_skb = skb_queue_prev(&priv->tx_queue, entry);
+			target_skb = entry->prev;
 			hole_size -= len;
 			target_addr = last_addr;
 		}
 		largest_hole = max(largest_hole, hole_size);
 		last_addr = range->end_addr;
+		entry = entry->next;
 	}
 	if (!target_skb && priv->rx_end - last_addr >= len) {
-		target_skb = skb_peek_tail(&priv->tx_queue);
+		target_skb = priv->tx_queue.prev;
 		largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
 		if (!skb_queue_empty(&priv->tx_queue)) {
 			info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2090,7 @@ out:
 static void p54_stop(struct ieee80211_hw *dev)
 {
 	struct p54_common *priv = dev->priv;
+	struct sk_buff *skb;
 
 	mutex_lock(&priv->conf_mutex);
 	priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2105,8 @@ static void p54_stop(struct ieee80211_hw *dev)
 		p54_tx_cancel(dev, priv->cached_beacon);
 
 	priv->stop(dev);
-	skb_queue_purge(&priv->tx_queue);
+	while ((skb = skb_dequeue(&priv->tx_queue)))
+		kfree_skb(skb);
 	priv->cached_beacon = NULL;
 	priv->tsf_high32 = priv->tsf_low32 = 0;
 	mutex_unlock(&priv->conf_mutex);
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a1871413d..70fdba2bbf71 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
 #define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
 #define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
 #define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
 #define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814c7a8d..8c2588e4edc0 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -735,12 +735,14 @@ static int parse_opts(char *params, struct p9_fd_opts *opts)
 		if (!*p)
 			continue;
 		token = match_token(p, tokens, args);
-		r = match_int(&args[0], &option);
-		if (r < 0) {
-			P9_DPRINTK(P9_DEBUG_ERROR,
-			 "integer field, but no integer?\n");
-			ret = r;
-			continue;
+		if (token != Opt_err) {
+			r = match_int(&args[0], &option);
+			if (r < 0) {
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				"integer field, but no integer?\n");
+				ret = r;
+				continue;
+			}
 		}
 		switch (token) {
 		case Opt_port:
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5ad03d..efe661a9def4 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@ static int mv88e6xxx_stats_wait(struct dsa_switch *ds)
 	int i;
 
 	for (i = 0; i < 10; i++) {
-		ret = REG_READ(REG_GLOBAL2, 0x1d);
+		ret = REG_READ(REG_GLOBAL, 0x1d);
 		if ((ret & 0x8000) == 0)
 			return 0;
 	}
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c96a4f..0071ee6f441f 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+			if (xprth + 4 < skb->data ||
+			    pskb_may_pull(skb, xprth + 4 - skb->data)) {
 				__be16 *ports = (__be16 *)xprth;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3883b4036a74..43b3c9f89c12 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@ ok:
 					update_lft = 1;
 				else if (stored_lft <= MIN_VALID_LIFETIME) {
 					/* valid_lft <= stored_lft is always true */
-					/* XXX: IPsec */
-					update_lft = 0;
+					/*
+					 * RFC 4862 Section 5.5.3e:
+					 * "Note that the preferred lifetime of
+					 *  the corresponding address is always
+					 *  reset to the Preferred Lifetime in
+					 *  the received Prefix Information
+					 *  option, regardless of whether the
+					 *  valid lifetime is also reset or
+					 *  ignored."
+					 *
+					 *  So if the preferred lifetime in
+					 *  this advertisement is different
+					 *  than what we have stored, but the
+					 *  valid lifetime is invalid, just
+					 *  reset prefered_lft.
+					 *
+					 *  We must set the valid lifetime
+					 *  to the stored lifetime since we'll
+					 *  be updating the timestamp below,
+					 *  else we'll set it back to the
+					 *  minumum.
+					 */
+					if (prefered_lft != ifp->prefered_lft) {
+						valid_lft = stored_lft;
+						update_lft = 1;
+					}
 				} else {
 					valid_lft = MIN_VALID_LIFETIME;
 					if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@ restart:
 				spin_unlock(&ifp->lock);
 				continue;
 			} else if (age >= ifp->prefered_lft) {
-				/* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+				/* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
 				int deprecate = 0;
 
 				if (!(ifp->flags&IFA_F_DEPRECATED)) {
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a43f277..3a3c677bc0f2 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
 	ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
 	ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
 
-	while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+	while (nh + offset + 1 < skb->data ||
+	       pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
 		nh = skb_network_header(skb);
 		exthdr = (struct ipv6_opt_hdr *)(nh + offset);
 
@@ -177,7 +178,8 @@ _decode_session6(struct sk_buff *skb, struct flowi *fl, int reverse)
 		case IPPROTO_TCP:
 		case IPPROTO_SCTP:
 		case IPPROTO_DCCP:
-			if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+			if (!onlyproto && (nh + offset + 4 < skb->data ||
+			     pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
 				__be16 *ports = (__be16 *)exthdr;
 
 				fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035970a2..971890dbfea0 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@ static void sctp_wait_for_close(struct sock *sk, long timeout)
 	finish_wait(sk->sk_sleep, &wait);
 }
 
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
-	struct sk_buff *frag;
-
-	if (!skb->data_len)
-		goto done;
-
-	/* Don't forget the fragments. */
-	skb_walk_frags(skb, frag)
-		sctp_sock_rfree_frag(frag);
-
-done:
-	sctp_sock_rfree(skb);
-}
-
 static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
 {
 	struct sk_buff *frag;
@@ -6776,7 +6761,6 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 	sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
 		event = sctp_skb2event(skb);
 		if (event->asoc == assoc) {
-			sctp_sock_rfree_frag(skb);
 			__skb_unlink(skb, &oldsk->sk_receive_queue);
 			__skb_queue_tail(&newsk->sk_receive_queue, skb);
 			sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 		sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
 			event = sctp_skb2event(skb);
 			if (event->asoc == assoc) {
-				sctp_sock_rfree_frag(skb);
 				__skb_unlink(skb, &oldsp->pd_lobby);
 				__skb_queue_tail(queue, skb);
 				sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 
 	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
-	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
-		sctp_sock_rfree_frag(skb);
+	sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
 		sctp_skb_set_owner_r_frag(skb, newsk);
-	}
 
 	/* Set the type of socket to indicate that it is peeled off from the
 	 * original UDP-style socket or created with the accept() call on a