firmware: arm_scmi: Add clock determine_rate operation

Add a clock operation to help determining the effective rate, closest to
the required one, that a specific clock can support.

Calculation is currently performed kernel side and the logic is taken
directly from the SCMI Clock driver: embedding the determinate rate logic
in the protocol layer enables simplifications in the SCMI Clock protocol
interface and will more easily accommodate further evolutions where such
determine_rate logic into is optionally delegated to the platform SCMI
server.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260508153300.2224715-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>

2 files changed, 48 insertions, 0 deletions

diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index ab36871650a1..54b55517b759 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2018-2022 ARM Ltd.
  */
 
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/limits.h>
 #include <linux/sort.h>
@@ -624,6 +625,46 @@ static int scmi_clock_rate_set(const struct scmi_protocol_handle *ph,
 	return ret;
 }
 
+static int scmi_clock_determine_rate(const struct scmi_protocol_handle *ph,
+				     u32 clk_id, unsigned long *rate)
+{
+	u64 fmin, fmax, ftmp;
+	struct scmi_clock_info *clk;
+	struct clock_info *ci = ph->get_priv(ph);
+
+	if (!rate)
+		return -EINVAL;
+
+	clk = scmi_clock_domain_lookup(ci, clk_id);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	/*
+	 * If we can't figure out what rate it will be, so just return the
+	 * rate back to the caller.
+	 */
+	if (clk->rate_discrete)
+		return 0;
+
+	fmin = clk->range.min_rate;
+	fmax = clk->range.max_rate;
+	if (*rate <= fmin) {
+		*rate = fmin;
+		return 0;
+	} else if (*rate >= fmax) {
+		*rate = fmax;
+		return 0;
+	}
+
+	ftmp = *rate - fmin;
+	ftmp += clk->range.step_size - 1; /* to round up */
+	ftmp = div64_ul(ftmp, clk->range.step_size);
+
+	*rate = ftmp * clk->range.step_size + fmin;
+
+	return 0;
+}
+
 static int
 scmi_clock_config_set(const struct scmi_protocol_handle *ph, u32 clk_id,
 		      enum clk_state state,
@@ -936,6 +977,7 @@ static const struct scmi_clk_proto_ops clk_proto_ops = {
 	.info_get = scmi_clock_info_get,
 	.rate_get = scmi_clock_rate_get,
 	.rate_set = scmi_clock_rate_set,
+	.determine_rate = scmi_clock_determine_rate,
 	.enable = scmi_clock_enable,
 	.disable = scmi_clock_disable,
 	.state_get = scmi_clock_state_get,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 8d0b106caed8..984117f51695 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -91,6 +91,10 @@ enum scmi_clock_oem_config {
  * @info_get: get the information of the specified clock
  * @rate_get: request the current clock rate of a clock
  * @rate_set: set the clock rate of a clock
+ * @determine_rate: determine the effective rate that can be supported by a
+ *		    clock calculating the closest allowed rate.
+ *		    Note that @rate is an input/output parameter used both to
+ *		    describe the requested rate and report the closest match
  * @enable: enables the specified clock
  * @disable: disables the specified clock
  * @state_get: get the status of the specified clock
@@ -108,6 +112,8 @@ struct scmi_clk_proto_ops {
 			u64 *rate);
 	int (*rate_set)(const struct scmi_protocol_handle *ph, u32 clk_id,
 			u64 rate);
+	int (*determine_rate)(const struct scmi_protocol_handle *ph, u32 clk_id,
+			      unsigned long *rate);
 	int (*enable)(const struct scmi_protocol_handle *ph, u32 clk_id,
 		      bool atomic);
 	int (*disable)(const struct scmi_protocol_handle *ph, u32 clk_id,