Merge tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and PHY driver fixes from Greg KH:
 "Here are some USB and PHY driver fixes that resolve some reported
  regressions.  Also in here are some new device ids.

  All of the details are in the shortlog and these patches have been in
  linux-next with no problems"

* tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
  usb: renesas_usbhs: Don't disable the pipe if Control write status stage
  usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop
  usb: gadget: f_fs: fix check in read operation
  usb: musb: fix order of conditions for assigning end point operations
  usb: gadget: f_uac1: check return code from config_ep_by_speed
  usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear()
  usb: gadget: g_ffs: Fix counting of missing_functions
  usb: s3c2410_udc: correct reversed pullup logic
  usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
  usb: phy: tahvo: Pass the IRQF_ONESHOT flag
  usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flag
  usb: renesas_usbhs: Revise the binding document about the dma-names
  usb: host: xhci: add mutex for non-thread-safe data
  usb: make module xhci_hcd removable
  USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
  usb: gadget: f_midi: fix segfault when reading empty id
  phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value
  phy: omap-usb2: invoke pm_runtime_disable on error path
  phy: fix Kconfig dependencies
  ...

20 files changed, 123 insertions, 63 deletions

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index dc2a18f0b3a1..ddbe304beb21 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -15,10 +15,8 @@ Optional properties:
   - phys: phandle + phy specifier pair
   - phy-names: must be "usb"
   - dmas: Must contain a list of references to DMA specifiers.
-  - dma-names : Must contain a list of DMA names:
-   - tx0 ... tx<n>
-   - rx0 ... rx<n>
-    - This <n> means DnFIFO in USBHS module.
+  - dma-names : named "ch%d", where %d is the channel number ranging from zero
+                to the number of channels (DnFIFOs) minus one.
 
 Example:
 	usbhs: usb@e6590000 {
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a53bd5b52df9..fc9b9f0ea91e 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -38,7 +38,9 @@ config ARMADA375_USBCLUSTER_PHY
 config PHY_DM816X_USB
 	tristate "TI dm816x USB PHY driver"
 	depends on ARCH_OMAP2PLUS
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_PHY
 	help
 	  Enable this for dm816x USB to work.
 
@@ -97,8 +99,9 @@ config OMAP_CONTROL_PHY
 config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
-	depends on USB_PHY
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_PHY
 	select OMAP_CONTROL_PHY
 	depends on OMAP_OCP2SCP
 	help
@@ -122,8 +125,9 @@ config TI_PIPE3
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	depends on USB_PHY
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_PHY
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
 	  family chips (including the TWL5030 and TPS659x0 devices).
@@ -304,7 +308,7 @@ config PHY_STIH41X_USB
 
 config PHY_QCOM_UFS
 	tristate "Qualcomm UFS PHY driver"
-	depends on OF && ARCH_MSM
+	depends on OF && ARCH_QCOM
 	select GENERIC_PHY
 	help
 	  Support for UFS PHY on QCOM chipsets.
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 3791838f4bd4..63bc12d7a73e 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -530,7 +530,7 @@ struct phy *phy_optional_get(struct device *dev, const char *string)
 {
 	struct phy *phy = phy_get(dev, string);
 
-	if (PTR_ERR(phy) == -ENODEV)
+	if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV))
 		phy = NULL;
 
 	return phy;
@@ -584,7 +584,7 @@ struct phy *devm_phy_optional_get(struct device *dev, const char *string)
 {
 	struct phy *phy = devm_phy_get(dev, string);
 
-	if (PTR_ERR(phy) == -ENODEV)
+	if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV))
 		phy = NULL;
 
 	return phy;
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 183ef4368101..c1a468686bdc 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -275,6 +275,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
 		phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
 		if (IS_ERR(phy->wkupclk)) {
 			dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
+			pm_runtime_disable(phy->dev);
 			return PTR_ERR(phy->wkupclk);
 		} else {
 			dev_warn(&pdev->dev,
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index 778276aba3aa..97d45f47d1ad 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -23,7 +23,7 @@
 #define USBHS_LPSTS			0x02
 #define USBHS_UGCTRL			0x80
 #define USBHS_UGCTRL2			0x84
-#define USBHS_UGSTS			0x88	/* The manuals have 0x90 */
+#define USBHS_UGSTS			0x88	/* From technical update */
 
 /* Low Power Status register (LPSTS) */
 #define USBHS_LPSTS_SUSPM		0x4000
@@ -41,7 +41,7 @@
 #define USBHS_UGCTRL2_USB0SEL_HS_USB	0x00000030
 
 /* USB General status register (UGSTS) */
-#define USBHS_UGSTS_LOCK		0x00000300 /* The manuals have 0x3 */
+#define USBHS_UGSTS_LOCK		0x00000100 /* From technical update */
 
 #define PHYS_PER_CHANNEL	2
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index fdab715a0631..c0eafa6fd403 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -339,7 +339,7 @@
 #define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
 
-#define DWC3_DGCMD_STATUS(n)		(((n) >> 15) & 1)
+#define DWC3_DGCMD_STATUS(n)		(((n) >> 12) & 0x0F)
 #define DWC3_DGCMD_CMDACT		(1 << 10)
 #define DWC3_DGCMD_CMDIOC		(1 << 8)
 
@@ -355,7 +355,7 @@
 #define DWC3_DEPCMD_PARAM_SHIFT		16
 #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
 #define DWC3_DEPCMD_GET_RSC_IDX(x)	(((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
-#define DWC3_DEPCMD_STATUS(x)		(((x) >> 15) & 1)
+#define DWC3_DEPCMD_STATUS(x)		(((x) >> 12) & 0x0F)
 #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
 #define DWC3_DEPCMD_CMDACT		(1 << 10)
 #define DWC3_DEPCMD_CMDIOC		(1 << 8)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 6bdb57069044..3507f880eb74 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -315,7 +315,6 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 				return ret;
 			}
 
-			set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags);
 			return len;
 		}
 		break;
@@ -847,7 +846,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 				ret = ep->status;
 				if (io_data->read && ret > 0) {
 					ret = copy_to_iter(data, ret, &io_data->data);
-					if (unlikely(iov_iter_count(&io_data->data)))
+					if (!ret)
 						ret = -EFAULT;
 				}
 			}
@@ -1463,8 +1462,7 @@ static void ffs_data_clear(struct ffs_data *ffs)
 {
 	ENTER();
 
-	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags))
-		ffs_closed(ffs);
+	ffs_closed(ffs);
 
 	BUG_ON(ffs->gadget);
 
@@ -3422,9 +3420,13 @@ static int ffs_ready(struct ffs_data *ffs)
 	ffs_obj->desc_ready = true;
 	ffs_obj->ffs_data = ffs;
 
-	if (ffs_obj->ffs_ready_callback)
+	if (ffs_obj->ffs_ready_callback) {
 		ret = ffs_obj->ffs_ready_callback(ffs);
+		if (ret)
+			goto done;
+	}
 
+	set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags);
 done:
 	ffs_dev_unlock();
 	return ret;
@@ -3443,7 +3445,8 @@ static void ffs_closed(struct ffs_data *ffs)
 
 	ffs_obj->desc_ready = false;
 
-	if (ffs_obj->ffs_closed_callback)
+	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) &&
+	    ffs_obj->ffs_closed_callback)
 		ffs_obj->ffs_closed_callback(ffs);
 
 	if (!ffs_obj->opts || ffs_obj->opts->no_configfs
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 259b656c0b3e..6316aa5b1c49 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -973,7 +973,13 @@ static ssize_t f_midi_opts_id_show(struct f_midi_opts *opts, char *page)
 	int result;
 
 	mutex_lock(&opts->lock);
-	result = strlcpy(page, opts->id, PAGE_SIZE);
+	if (opts->id) {
+		result = strlcpy(page, opts->id, PAGE_SIZE);
+	} else {
+		page[0] = 0;
+		result = 0;
+	}
+
 	mutex_unlock(&opts->lock);
 
 	return result;
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 9719abfb6145..7856b3394494 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -588,7 +588,10 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 
 	if (intf == 1) {
 		if (alt == 1) {
-			config_ep_by_speed(cdev->gadget, f, out_ep);
+			err = config_ep_by_speed(cdev->gadget, f, out_ep);
+			if (err)
+				return err;
+
 			usb_ep_enable(out_ep);
 			out_ep->driver_data = audio;
 			audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
index 7b9ef7e257d2..e821931c965c 100644
--- a/drivers/usb/gadget/legacy/g_ffs.c
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -304,8 +304,10 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
 	gfs_registered = true;
 
 	ret = usb_composite_probe(&gfs_driver);
-	if (unlikely(ret < 0))
+	if (unlikely(ret < 0)) {
+		++missing_funcs;
 		gfs_registered = false;
+	}
 	
 	return ret;
 }
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index b808951491cc..99fd9a5667df 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1487,7 +1487,7 @@ static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on)
 
 	dprintk(DEBUG_NORMAL, "%s()\n", __func__);
 
-	s3c2410_udc_set_pullup(udc, is_on ? 0 : 1);
+	s3c2410_udc_set_pullup(udc, is_on);
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ec8ac1674854..36bf089b708f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3682,18 +3682,21 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	unsigned long flags;
-	int ret;
+	int ret, slot_id;
 	struct xhci_command *command;
 
 	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
 	if (!command)
 		return 0;
 
+	/* xhci->slot_id and xhci->addr_dev are not thread-safe */
+	mutex_lock(&xhci->mutex);
 	spin_lock_irqsave(&xhci->lock, flags);
 	command->completion = &xhci->addr_dev;
 	ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
+		mutex_unlock(&xhci->mutex);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
 		kfree(command);
 		return 0;
@@ -3702,8 +3705,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	wait_for_completion(command->completion);
+	slot_id = xhci->slot_id;
+	mutex_unlock(&xhci->mutex);
 
-	if (!xhci->slot_id || command->status != COMP_SUCCESS) {
+	if (!slot_id || command->status != COMP_SUCCESS) {
 		xhci_err(xhci, "Error while assigning device slot ID\n");
 		xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
 				HCS_MAX_SLOTS(
@@ -3728,11 +3733,11 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	 * xhci_discover_or_reset_device(), which may be called as part of
 	 * mass storage driver error handling.
 	 */
-	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
+	if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
 		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
 		goto disable_slot;
 	}
-	udev->slot_id = xhci->slot_id;
+	udev->slot_id = slot_id;
 
 #ifndef CONFIG_USB_DEFAULT_PERSIST
 	/*
@@ -3778,12 +3783,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	u64 temp_64;
-	struct xhci_command *command;
+	struct xhci_command *command = NULL;
+
+	mutex_lock(&xhci->mutex);
 
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"Bad Slot ID %d", udev->slot_id);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	virt_dev = xhci->devs[udev->slot_id];
@@ -3796,7 +3804,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		 */
 		xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
 			udev->slot_id);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	if (setup == SETUP_CONTEXT_ONLY) {
@@ -3804,13 +3813,15 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
 		    SLOT_STATE_DEFAULT) {
 			xhci_dbg(xhci, "Slot already in default state\n");
-			return 0;
+			goto out;
 		}
 	}
 
 	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
-	if (!command)
-		return -ENOMEM;
+	if (!command) {
+		ret = -ENOMEM;
+		goto out;
+	}
 
 	command->in_ctx = virt_dev->in_ctx;
 	command->completion = &xhci->addr_dev;
@@ -3820,8 +3831,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 	if (!ctrl_ctx) {
 		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
 				__func__);
-		kfree(command);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
 	/*
 	 * If this is the first Set Address since device plug-in or
@@ -3848,8 +3859,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"FIXME: allocate a command ring segment");
-		kfree(command);
-		return ret;
+		goto out;
 	}
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3896,10 +3906,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		ret = -EINVAL;
 		break;
 	}
-	if (ret) {
-		kfree(command);
-		return ret;
-	}
+	if (ret)
+		goto out;
 	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 			"Op regs DCBAA ptr = %#016llx", temp_64);
@@ -3932,8 +3940,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 		       "Internal device address = %d",
 		       le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+	mutex_unlock(&xhci->mutex);
 	kfree(command);
-	return 0;
+	return ret;
 }
 
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
@@ -4855,6 +4865,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		return 0;
 	}
 
+	mutex_init(&xhci->mutex);
 	xhci->cap_regs = hcd->regs;
 	xhci->op_regs = hcd->regs +
 		HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
@@ -5011,4 +5022,12 @@ static int __init xhci_hcd_init(void)
 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
 	return 0;
 }
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void) { }
+
 module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea75e8ccd3c1..6977f8491fa7 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1497,6 +1497,8 @@ struct xhci_hcd {
 	struct list_head	lpm_failed_devs;
 
 	/* slot enabling and address device helpers */
+	/* these are not thread safe so use mutex */
+	struct mutex mutex;
 	struct completion	addr_dev;
 	int slot_id;
 	/* For USB 3.0 LPM enable/disable. */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3789b08ef67b..6dca3d794ced 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2021,13 +2021,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (musb->ops->quirks)
 		musb->io.quirks = musb->ops->quirks;
 
-	/* At least tusb6010 has it's own offsets.. */
-	if (musb->ops->ep_offset)
-		musb->io.ep_offset = musb->ops->ep_offset;
-	if (musb->ops->ep_select)
-		musb->io.ep_select = musb->ops->ep_select;
-
-	/* ..and some devices use indexed offset or flat offset */
+	/* Most devices use indexed offset or flat offset */
 	if (musb->io.quirks & MUSB_INDEXED_EP) {
 		musb->io.ep_offset = musb_indexed_ep_offset;
 		musb->io.ep_select = musb_indexed_ep_select;
@@ -2036,6 +2030,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb->io.ep_select = musb_flat_ep_select;
 	}
 
+	/* At least tusb6010 has its own offsets */
+	if (musb->ops->ep_offset)
+		musb->io.ep_offset = musb->ops->ep_offset;
+	if (musb->ops->ep_select)
+		musb->io.ep_select = musb->ops->ep_select;
+
 	if (musb->ops->fifo_mode)
 		fifo_mode = musb->ops->fifo_mode;
 	else
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 7225d526df04..03ab0c699f74 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1179,7 +1179,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
 		}
 		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				ab8500_usb_link_status_irq,
-				IRQF_NO_SUSPEND | IRQF_SHARED,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
 				"usb-link-status", ab);
 		if (err < 0) {
 			dev_err(ab->dev, "request_irq failed for link status irq\n");
@@ -1195,7 +1195,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
 		}
 		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				ab8500_usb_disconnect_irq,
-				IRQF_NO_SUSPEND | IRQF_SHARED,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
 				"usb-id-fall", ab);
 		if (err < 0) {
 			dev_err(ab->dev, "request_irq failed for ID fall irq\n");
@@ -1211,7 +1211,7 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
 		}
 		err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 				ab8500_usb_disconnect_irq,
-				IRQF_NO_SUSPEND | IRQF_SHARED,
+				IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
 				"usb-vbus-fall", ab);
 		if (err < 0) {
 			dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 845f658276b1..2b28443d07b9 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -401,7 +401,8 @@ static int tahvo_usb_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, tu);
 
 	tu->irq = platform_get_irq(pdev, 0);
-	ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, 0,
+	ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
+				   IRQF_ONESHOT,
 				   "tahvo-vbus", tu);
 	if (ret) {
 		dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 8597cf9cfceb..c0f5c652d272 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -611,6 +611,8 @@ struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = {
 static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
 
 	if (usbhs_pipe_is_busy(pipe))
 		return 0;
@@ -624,6 +626,9 @@ static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
 	usbhs_pipe_data_sequence(pipe, pkt->sequence);
 	pkt->sequence = -1; /* -1 sequence will be ignored */
 
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_fifo_clear(pipe, fifo);
+
 	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length);
 	usbhs_pipe_enable(pipe);
 	usbhs_pipe_running(pipe, 1);
@@ -673,7 +678,14 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
 		*is_done = 1;
 		usbhsf_rx_irq_ctrl(pipe, 0);
 		usbhs_pipe_running(pipe, 0);
-		usbhs_pipe_disable(pipe);	/* disable pipe first */
+		/*
+		 * If function mode, since this controller is possible to enter
+		 * Control Write status stage at this timing, this driver
+		 * should not disable the pipe. If such a case happens, this
+		 * controller is not able to complete the status stage.
+		 */
+		if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe))
+			usbhs_pipe_disable(pipe);	/* disable pipe first */
 	}
 
 	/*
@@ -1227,15 +1239,21 @@ static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo,
 {
 	char name[16];
 
-	snprintf(name, sizeof(name), "tx%d", channel);
-	fifo->tx_chan = dma_request_slave_channel_reason(dev, name);
-	if (IS_ERR(fifo->tx_chan))
-		fifo->tx_chan = NULL;
-
-	snprintf(name, sizeof(name), "rx%d", channel);
-	fifo->rx_chan = dma_request_slave_channel_reason(dev, name);
-	if (IS_ERR(fifo->rx_chan))
-		fifo->rx_chan = NULL;
+	/*
+	 * To avoid complex handing for DnFIFOs, the driver uses each
+	 * DnFIFO as TX or RX direction (not bi-direction).
+	 * So, the driver uses odd channels for TX, even channels for RX.
+	 */
+	snprintf(name, sizeof(name), "ch%d", channel);
+	if (channel & 1) {
+		fifo->tx_chan = dma_request_slave_channel_reason(dev, name);
+		if (IS_ERR(fifo->tx_chan))
+			fifo->tx_chan = NULL;
+	} else {
+		fifo->rx_chan = dma_request_slave_channel_reason(dev, name);
+		if (IS_ERR(fifo->rx_chan))
+			fifo->rx_chan = NULL;
+	}
 }
 
 static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 9031750e7404..ffd739e31bfc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8eb68a31cab6..4c8b3b82103d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -699,6 +699,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 4e4f46f3c89c..792e054126de 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -155,6 +155,7 @@
 #define XSENS_AWINDA_STATION_PID 0x0101
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */