diff options
| author | Thangaraj Samynathan <thangaraj.s@microchip.com> | 2026-03-18 09:32:28 +0300 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2026-03-21 04:50:23 +0300 |
| commit | e783e40fb689381caca31e03d28c39e10c82e722 (patch) | |
| tree | 9d633fe7a1b62683f07f6e3cd8b303acc5016892 | |
| parent | 64cf4b95de0741e25a5c1f3140de50149fa68937 (diff) | |
| download | linux-e783e40fb689381caca31e03d28c39e10c82e722.tar.xz | |
net: lan743x: fix SGMII detection on PCI1xxxx B0+ during warm reset
A warm reset on boards using an EEPROM-only strap configuration (where
no MAC address is set in the image) can cause the driver to incorrectly
revert to RGMII mode. This occurs because the ENET_CONFIG_LOAD_STARTED
bit may not persist or behave as expected.
Update pci11x1x_strap_get_status() to use revision-specific validation:
- For PCI11x1x A0: Continue using the legacy check (config load started
or reset protection) to validate the SGMII strap.
- For PCI11x1x B0 and later: Use the newly available
STRAP_READ_USE_SGMII_EN_ bit in the upper strap register to validate
the lower SGMII_EN bit.
This ensures the SGMII interface is correctly identified even after a
warm reboot.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260318063228.17110-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/microchip/lan743x_main.c | 15 | ||||
| -rw-r--r-- | drivers/net/ethernet/microchip/lan743x_main.h | 1 |
2 files changed, 12 insertions, 4 deletions
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index a3845edf0e48..ff48012c8046 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -28,6 +28,12 @@ #define RFE_RD_FIFO_TH_3_DWORDS 0x3 +static bool pci11x1x_is_a0(struct lan743x_adapter *adapter) +{ + u32 dev_rev = adapter->csr.id_rev & ID_REV_CHIP_REV_MASK_; + return dev_rev == ID_REV_CHIP_REV_PCI11X1X_A0_; +} + static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter) { u32 chip_rev; @@ -47,10 +53,11 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter) cfg_load = lan743x_csr_read(adapter, ETH_SYS_CONFIG_LOAD_STARTED_REG); lan743x_hs_syslock_release(adapter); hw_cfg = lan743x_csr_read(adapter, HW_CFG); - - if (cfg_load & GEN_SYS_LOAD_STARTED_REG_ETH_ || - hw_cfg & HW_CFG_RST_PROTECT_) { - strap = lan743x_csr_read(adapter, STRAP_READ); + strap = lan743x_csr_read(adapter, STRAP_READ); + if ((pci11x1x_is_a0(adapter) && + (cfg_load & GEN_SYS_LOAD_STARTED_REG_ETH_ || + hw_cfg & HW_CFG_RST_PROTECT_)) || + (strap & STRAP_READ_USE_SGMII_EN_)) { if (strap & STRAP_READ_SGMII_EN_) adapter->is_sgmii_en = true; else diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h index 02a28b709163..160d94a7cee6 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.h +++ b/drivers/net/ethernet/microchip/lan743x_main.h @@ -27,6 +27,7 @@ #define ID_REV_CHIP_REV_MASK_ (0x0000FFFF) #define ID_REV_CHIP_REV_A0_ (0x00000000) #define ID_REV_CHIP_REV_B0_ (0x00000010) +#define ID_REV_CHIP_REV_PCI11X1X_A0_ (0x000000A0) #define ID_REV_CHIP_REV_PCI11X1X_B0_ (0x000000B0) #define FPGA_REV (0x04) |