arm64: dts: qcom: sm8250: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-13-dmitry.baryshkov@linaro.org

4 files changed, 133 insertions, 133 deletions

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index dfcaac266456..9022ad726741 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -535,30 +535,6 @@
 	firmware-name = "qcom/sm8250/cdsp.mbn";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l9a_1p2>;
-
-#if 0
-	qcom,dual-dsi-mode;
-	qcom,master-dsi;
-#endif
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l5a_0p88>;
-};
-
 &gmu {
 	status = "okay";
 };
@@ -604,7 +580,7 @@
 				reg = <0>;
 
 				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -613,7 +589,7 @@
 				reg = <1>;
 
 				lt9611_b: endpoint {
-					remote-endpoint = <&dsi1_out>;
+					remote-endpoint = <&mdss_dsi1_out>;
 				};
 			};
 #endif
@@ -639,6 +615,30 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l9a_1p2>;
+
+#if 0
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+#endif
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p88>;
+};
+
 &pm8150_adc {
 	xo-therm@4c {
 		reg = <ADC5_XO_THERM_100K_PU>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 1326c171fe72..cfbc4fc1eba9 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -311,25 +311,6 @@
 	status = "okay";
 };
 
-&dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l1a_0p875>;
-};
-
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -422,7 +403,7 @@
 			port@0 {
 				reg = <0>;
 				sn65dsi86_in_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -475,6 +456,25 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index eaac00085894..b841ea9192ae 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -470,75 +470,6 @@
 	status = "okay";
 };
 
-&dsi0 {
-	vdda-supply = <&vreg_l9a_1p2>;
-	qcom,dual-dsi-mode;
-	qcom,sync-dual-dsi;
-	qcom,master-dsi;
-	status = "okay";
-
-	display_panel: panel@0 {
-		reg = <0>;
-		vddio-supply = <&vreg_l14a_1p88>;
-		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
-		backlight = <&backlight>;
-
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				panel_in_0: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-
-			port@1{
-				reg = <1>;
-
-				panel_in_1: endpoint {
-					remote-endpoint = <&dsi1_out>;
-				};
-			};
-		};
-	};
-};
-
-&dsi0_out {
-	data-lanes = <0 1 2>;
-	remote-endpoint = <&panel_in_0>;
-};
-
-&dsi0_phy {
-	vdds-supply = <&vreg_l5a_0p88>;
-	phy-type = <PHY_TYPE_CPHY>;
-	status = "okay";
-};
-
-&dsi1 {
-	vdda-supply = <&vreg_l9a_1p2>;
-	qcom,dual-dsi-mode;
-	qcom,sync-dual-dsi;
-	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-	status = "okay";
-};
-
-&dsi1_out {
-	data-lanes = <0 1 2>;
-	remote-endpoint = <&panel_in_1>;
-};
-
-&dsi1_phy {
-	vdds-supply = <&vreg_l5a_0p88>;
-	phy-type = <PHY_TYPE_CPHY>;
-	status = "okay";
-};
-
 &gmu {
 	status = "okay";
 };
@@ -607,6 +538,75 @@
 	status = "okay";
 };
 
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	qcom,master-dsi;
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p88>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				panel_in_0: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1{
+				reg = <1>;
+
+				panel_in_1: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_0>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	status = "okay";
+};
+
+&mdss_dsi1_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_1>;
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 08ea6396d364..83ab6de459bc 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4242,14 +4242,14 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
 						dpu_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
@@ -4279,7 +4279,7 @@
 				};
 			};
 
-			dsi0: dsi@ae94000 {
+			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8250-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -4302,12 +4302,12 @@
 					      "bus";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				status = "disabled";
 
@@ -4320,14 +4320,14 @@
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -4352,7 +4352,7 @@
 				};
 			};
 
-			dsi0_phy: phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -4371,7 +4371,7 @@
 				status = "disabled";
 			};
 
-			dsi1: dsi@ae96000 {
+			mdss_dsi1: dsi@ae96000 {
 				compatible = "qcom,sm8250-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
@@ -4394,12 +4394,12 @@
 					      "bus";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
-				phys = <&dsi1_phy>;
+				phys = <&mdss_dsi1_phy>;
 
 				status = "disabled";
 
@@ -4412,20 +4412,20 @@
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 							remote-endpoint = <&dpu_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi1_phy: phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -4451,10 +4451,10 @@
 			power-domains = <&rpmhpd SM8250_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&dsi0_phy 0>,
-				 <&dsi0_phy 1>,
-				 <&dsi1_phy 0>,
-				 <&dsi1_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
 				 <&dp_phy 0>,
 				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",