Merge tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next

Manivannan writes:

MHI Host
========

- Fix conflict between MHI power up and SYSERR state transitions by issuing MHI
  reset only if the device is in SYSERR state while in SBL/PBL EEs. The device
  won't respond to reset if it is not in SYSERR state in SBL/PBL EEs.

- Remove redundant call to pci_assign_resource() since PCI core calls this API
  internally.

- Add Telit FN920C04 modem which is based on Qcom SDX35 chipset.

* tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
  bus: mhi: host: pci_generic: Add Telit FN920C04 modem support
  bus: mhi: host: pci_generic: Remove redundant assign resource usage
  bus: mhi: host: Fix conflict between power_up and SYSERR

2 files changed, 56 insertions, 5 deletions

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 03aa88795209..a4a62429c784 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -782,6 +782,42 @@ static const struct mhi_pci_dev_info mhi_telit_fe990a_info = {
 	.mru_default = 32768,
 };
 
+static const struct mhi_channel_config mhi_telit_fn920c04_channels[] = {
+	MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 1),
+	MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 1),
+	MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
+	MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
+	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
+	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
+	MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1),
+	MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1),
+	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
+	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
+};
+
+static const struct mhi_controller_config modem_telit_fn920c04_config = {
+	.max_channels = 128,
+	.timeout_ms = 50000,
+	.num_channels = ARRAY_SIZE(mhi_telit_fn920c04_channels),
+	.ch_cfg = mhi_telit_fn920c04_channels,
+	.num_events = ARRAY_SIZE(mhi_telit_fn990_events),
+	.event_cfg = mhi_telit_fn990_events,
+};
+
+static const struct mhi_pci_dev_info mhi_telit_fn920c04_info = {
+	.name = "telit-fn920c04",
+	.config = &modem_telit_fn920c04_config,
+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+	.dma_data_width = 32,
+	.sideband_wake = false,
+	.mru_default = 32768,
+	.edl_trigger = true,
+};
+
 static const struct mhi_pci_dev_info mhi_netprisma_lcur57_info = {
 	.name = "netprisma-lcur57",
 	.edl = "qcom/prog_firehose_sdx24.mbn",
@@ -806,6 +842,9 @@ static const struct mhi_pci_dev_info mhi_netprisma_fcun69_info = {
 static const struct pci_device_id mhi_pci_id_table[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0116),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sa8775p_info },
+	/* Telit FN920C04 (sdx35) */
+	{PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x011a, 0x1c5d, 0x2020),
+		.driver_data = (kernel_ulong_t) &mhi_telit_fn920c04_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
@@ -996,10 +1035,6 @@ static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
 	struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
 	int err;
 
-	err = pci_assign_resource(pdev, bar_num);
-	if (err)
-		return err;
-
 	err = pcim_enable_device(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
index 2fb27e6f8f88..33d92bf2fc3e 100644
--- a/drivers/bus/mhi/host/pm.c
+++ b/drivers/bus/mhi/host/pm.c
@@ -602,6 +602,7 @@ static void mhi_pm_sys_error_transition(struct mhi_controller *mhi_cntrl)
 	struct mhi_cmd *mhi_cmd;
 	struct mhi_event_ctxt *er_ctxt;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	bool reset_device = false;
 	int ret, i;
 
 	dev_dbg(dev, "Transitioning from PM state: %s to: %s\n",
@@ -630,8 +631,23 @@ static void mhi_pm_sys_error_transition(struct mhi_controller *mhi_cntrl)
 	/* Wake up threads waiting for state transition */
 	wake_up_all(&mhi_cntrl->state_event);
 
-	/* Trigger MHI RESET so that the device will not access host memory */
 	if (MHI_REG_ACCESS_VALID(prev_state)) {
+		/*
+		 * If the device is in PBL or SBL, it will only respond to
+		 * RESET if the device is in SYSERR state. SYSERR might
+		 * already be cleared at this point.
+		 */
+		enum mhi_state cur_state = mhi_get_mhi_state(mhi_cntrl);
+		enum mhi_ee_type cur_ee = mhi_get_exec_env(mhi_cntrl);
+
+		if (cur_state == MHI_STATE_SYS_ERR)
+			reset_device = true;
+		else if (cur_ee != MHI_EE_PBL && cur_ee != MHI_EE_SBL)
+			reset_device = true;
+	}
+
+	/* Trigger MHI RESET so that the device will not access host memory */
+	if (reset_device) {
 		u32 in_reset = -1;
 		unsigned long timeout = msecs_to_jiffies(mhi_cntrl->timeout_ms);