summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJarkko Nikula <jarkko.nikula@linux.intel.com>2020-11-17 19:08:27 +0300
committerMarc Kleine-Budde <mkl@pengutronix.de>2020-12-10 12:40:10 +0300
commitcab7ffc0324f053c8fb56c821cdd63dc0383270d (patch)
tree08a07c2ec99c617796df6f9be8610ec9059d40a7
parent227619c3ff7c71eab76848b3b2add06838f5b6e6 (diff)
downloadlinux-cab7ffc0324f053c8fb56c821cdd63dc0383270d.tar.xz
can: m_can: add PCI glue driver for Intel Elkhart Lake
Add support for M_CAN controller on Intel Elkhart Lake attached to the PCI bus. It integrates the Bosch M_CAN controller with Message RAM and the wrapper IP block with additional registers which all of them are within the same MMIO range. Currently only interrupt control register from wrapper IP is used and the MRAM configuration is expected to come from the firmware via "bosch,mram-cfg" device property and parsed by m_can.c core. Initial implementation is done by Felipe Balbi while he was working at Intel with later changes from Raymond Tan and me. Co-developed-by: Felipe Balbi (Intel) <balbi@kernel.org> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Felipe Balbi (Intel) <balbi@kernel.org> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20201117160827.3636264-1-jarkko.nikula@linux.intel.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-rw-r--r--drivers/net/can/m_can/Kconfig7
-rw-r--r--drivers/net/can/m_can/Makefile1
-rw-r--r--drivers/net/can/m_can/m_can_pci.c186
3 files changed, 194 insertions, 0 deletions
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index e3eb69b76cf5..45ad1b3f0cd0 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -7,6 +7,13 @@ menuconfig CAN_M_CAN
if CAN_M_CAN
+config CAN_M_CAN_PCI
+ tristate "Generic PCI Bus based M_CAN driver"
+ depends on PCI
+ help
+ Say Y here if you want to support Bosch M_CAN controller connected
+ to the pci bus.
+
config CAN_M_CAN_PLATFORM
tristate "Bosch M_CAN support for io-mapped devices"
depends on HAS_IOMEM
diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
index 52a4a6fbe527..ef7963ff2006 100644
--- a/drivers/net/can/m_can/Makefile
+++ b/drivers/net/can/m_can/Makefile
@@ -4,5 +4,6 @@
#
obj-$(CONFIG_CAN_M_CAN) += m_can.o
+obj-$(CONFIG_CAN_M_CAN_PCI) += m_can_pci.o
obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
obj-$(CONFIG_CAN_M_CAN_TCAN4X5X) += tcan4x5x.o
diff --git a/drivers/net/can/m_can/m_can_pci.c b/drivers/net/can/m_can/m_can_pci.c
new file mode 100644
index 000000000000..04010ee0407c
--- /dev/null
+++ b/drivers/net/can/m_can/m_can_pci.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Specific M_CAN Glue
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ * Author: Felipe Balbi (Intel)
+ * Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+ * Author: Raymond Tan <raymond.tan@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+
+#include "m_can.h"
+
+#define M_CAN_PCI_MMIO_BAR 0
+
+#define M_CAN_CLOCK_FREQ_EHL 100000000
+#define CTL_CSR_INT_CTL_OFFSET 0x508
+
+struct m_can_pci_priv {
+ void __iomem *base;
+};
+
+static u32 iomap_read_reg(struct m_can_classdev *cdev, int reg)
+{
+ struct m_can_pci_priv *priv = cdev->device_data;
+
+ return readl(priv->base + reg);
+}
+
+static u32 iomap_read_fifo(struct m_can_classdev *cdev, int offset)
+{
+ struct m_can_pci_priv *priv = cdev->device_data;
+
+ return readl(priv->base + offset);
+}
+
+static int iomap_write_reg(struct m_can_classdev *cdev, int reg, int val)
+{
+ struct m_can_pci_priv *priv = cdev->device_data;
+
+ writel(val, priv->base + reg);
+
+ return 0;
+}
+
+static int iomap_write_fifo(struct m_can_classdev *cdev, int offset, int val)
+{
+ struct m_can_pci_priv *priv = cdev->device_data;
+
+ writel(val, priv->base + offset);
+
+ return 0;
+}
+
+static struct m_can_ops m_can_pci_ops = {
+ .read_reg = iomap_read_reg,
+ .write_reg = iomap_write_reg,
+ .write_fifo = iomap_write_fifo,
+ .read_fifo = iomap_read_fifo,
+};
+
+static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
+{
+ struct device *dev = &pci->dev;
+ struct m_can_classdev *mcan_class;
+ struct m_can_pci_priv *priv;
+ void __iomem *base;
+ int ret;
+
+ ret = pcim_enable_device(pci);
+ if (ret)
+ return ret;
+
+ pci_set_master(pci);
+
+ ret = pcim_iomap_regions(pci, BIT(M_CAN_PCI_MMIO_BAR), pci_name(pci));
+ if (ret)
+ return ret;
+
+ base = pcim_iomap_table(pci)[M_CAN_PCI_MMIO_BAR];
+
+ if (!base) {
+ dev_err(dev, "failed to map BARs\n");
+ return -ENOMEM;
+ }
+
+ priv = devm_kzalloc(&pci->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mcan_class = m_can_class_allocate_dev(&pci->dev);
+ if (!mcan_class)
+ return -ENOMEM;
+
+ priv->base = base;
+
+ ret = pci_alloc_irq_vectors(pci, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+
+ mcan_class->device_data = priv;
+ mcan_class->dev = &pci->dev;
+ mcan_class->net->irq = pci_irq_vector(pci, 0);
+ mcan_class->pm_clock_support = 1;
+ mcan_class->can.clock.freq = id->driver_data;
+ mcan_class->ops = &m_can_pci_ops;
+
+ pci_set_drvdata(pci, mcan_class->net);
+
+ ret = m_can_class_register(mcan_class);
+ if (ret)
+ goto err;
+
+ /* Enable interrupt control at CAN wrapper IP */
+ writel(0x1, base + CTL_CSR_INT_CTL_OFFSET);
+
+ pm_runtime_set_autosuspend_delay(dev, 1000);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put_noidle(dev);
+ pm_runtime_allow(dev);
+
+ return 0;
+
+err:
+ pci_free_irq_vectors(pci);
+ return ret;
+}
+
+static void m_can_pci_remove(struct pci_dev *pci)
+{
+ struct net_device *dev = pci_get_drvdata(pci);
+ struct m_can_classdev *mcan_class = netdev_priv(dev);
+ struct m_can_pci_priv *priv = mcan_class->device_data;
+
+ pm_runtime_forbid(&pci->dev);
+ pm_runtime_get_noresume(&pci->dev);
+
+ /* Disable interrupt control at CAN wrapper IP */
+ writel(0x0, priv->base + CTL_CSR_INT_CTL_OFFSET);
+
+ m_can_class_unregister(mcan_class);
+ pci_free_irq_vectors(pci);
+}
+
+static __maybe_unused int m_can_pci_suspend(struct device *dev)
+{
+ return m_can_class_suspend(dev);
+}
+
+static __maybe_unused int m_can_pci_resume(struct device *dev)
+{
+ return m_can_class_resume(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(m_can_pci_pm_ops,
+ m_can_pci_suspend, m_can_pci_resume);
+
+static const struct pci_device_id m_can_pci_id_table[] = {
+ { PCI_VDEVICE(INTEL, 0x4bc1), M_CAN_CLOCK_FREQ_EHL, },
+ { PCI_VDEVICE(INTEL, 0x4bc2), M_CAN_CLOCK_FREQ_EHL, },
+ { } /* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, m_can_pci_id_table);
+
+static struct pci_driver m_can_pci_driver = {
+ .name = "m_can_pci",
+ .probe = m_can_pci_probe,
+ .remove = m_can_pci_remove,
+ .id_table = m_can_pci_id_table,
+ .driver = {
+ .pm = &m_can_pci_pm_ops,
+ },
+};
+
+module_pci_driver(m_can_pci_driver);
+
+MODULE_AUTHOR("Felipe Balbi (Intel)");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>");
+MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller on PCI bus");