summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorEyal Reizer <eyalreizer@gmail.com>2015-04-29 17:50:03 +0300
committerKalle Valo <kvalo@codeaurora.org>2015-05-09 16:42:27 +0300
commitbd763482c82ea24aacb51e0ba92b24074143bc86 (patch)
treee1fcab6dfb5cd40d281bb61bf268a4e83a81851a
parentad48013783dc40e44505cfd9ca9ade7887792a62 (diff)
downloadlinux-bd763482c82ea24aacb51e0ba92b24074143bc86.tar.xz
wl18xx: wlan_irq: support platform dependent interrupt types
* Interrupt request need to happen when the wilink chip is powered on and driving the wlan_irq line. This avoids spurious interrupt issues that are a result of different external pulls configuration on different platforms * Allow working with wl18xx level-low and falling edge irqs by configuring wl18xx to invert the device interrupt Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-rw-r--r--drivers/net/wireless/ti/wl18xx/main.c26
-rw-r--r--drivers/net/wireless/ti/wl18xx/reg.h1
-rw-r--r--drivers/net/wireless/ti/wlcore/main.c26
3 files changed, 40 insertions, 13 deletions
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 717c4f5a02c2..dc48448b76c0 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -24,6 +24,7 @@
#include <linux/ip.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/irq.h>
#include "../wlcore/wlcore.h"
#include "../wlcore/debug.h"
@@ -578,7 +579,7 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
[PART_TOP_PRCM_ELP_SOC] = {
- .mem = { .start = 0x00A02000, .size = 0x00010000 },
+ .mem = { .start = 0x00A00000, .size = 0x00012000 },
.reg = { .start = 0x00807000, .size = 0x00005000 },
.mem2 = { .start = 0x00800000, .size = 0x0000B000 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
@@ -862,6 +863,7 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
{
u32 tmp;
int ret;
+ u16 irq_invert;
BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) >
WL18XX_PHY_INIT_MEM_SIZE);
@@ -911,6 +913,28 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
/* re-enable FDSP clock */
ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
MEM_FDSP_CLK_120_ENABLE);
+ if (ret < 0)
+ goto out;
+
+ ret = irq_get_trigger_type(wl->irq);
+ if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) {
+ wl1271_info("using inverted interrupt logic: %d", ret);
+ ret = wlcore_set_partition(wl,
+ &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+ if (ret < 0)
+ goto out;
+
+ ret = wl18xx_top_reg_read(wl, TOP_FN0_CCCR_REG_32, &irq_invert);
+ if (ret < 0)
+ goto out;
+
+ irq_invert |= BIT(1);
+ ret = wl18xx_top_reg_write(wl, TOP_FN0_CCCR_REG_32, irq_invert);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+ }
out:
return ret;
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index a433a75f3cd7..bac2364c8e72 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -109,6 +109,7 @@
#define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100)
#define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C)
+#define TOP_FN0_CCCR_REG_32 (WL18XX_TOP_OCP_BASE + 0x64)
/* PRCM registers */
#define PLATFORM_DETECTION 0xA0E3E0
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 0be807951afe..c39a07b16591 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5966,10 +5966,6 @@ static int wl12xx_get_hw_info(struct wl1271 *wl)
{
int ret;
- ret = wl12xx_set_power_on(wl);
- if (ret < 0)
- return ret;
-
ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &wl->chip.id);
if (ret < 0)
goto out;
@@ -5985,7 +5981,6 @@ static int wl12xx_get_hw_info(struct wl1271 *wl)
ret = wl->ops->get_mac(wl);
out:
- wl1271_power_off(wl);
return ret;
}
@@ -6432,10 +6427,22 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
else
wl->irq_flags |= IRQF_ONESHOT;
+ ret = wl12xx_set_power_on(wl);
+ if (ret < 0)
+ goto out_free_nvs;
+
+ ret = wl12xx_get_hw_info(wl);
+ if (ret < 0) {
+ wl1271_error("couldn't get hw info");
+ wl1271_power_off(wl);
+ goto out_free_nvs;
+ }
+
ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq,
wl->irq_flags, pdev->name, wl);
if (ret < 0) {
- wl1271_error("request_irq() failed: %d", ret);
+ wl1271_error("interrupt configuration failed");
+ wl1271_power_off(wl);
goto out_free_nvs;
}
@@ -6449,12 +6456,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
}
#endif
disable_irq(wl->irq);
-
- ret = wl12xx_get_hw_info(wl);
- if (ret < 0) {
- wl1271_error("couldn't get hw info");
- goto out_irq;
- }
+ wl1271_power_off(wl);
ret = wl->ops->identify_chip(wl);
if (ret < 0)