wifi: cfg80211: Advertise supported NAN capabilities

Allow drivers to specify the supported NAN capabilities and support
advertising the NAN capabilities to user space.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.2976966556f5.Ic6e43b10049573180c909dad806f279cfb31143e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

3 files changed, 96 insertions, 0 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d350263f23f3..2110345de8ef 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -6065,4 +6065,21 @@ static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap)
 				 _data + ieee80211_mle_common_size(_data),\
 				 _len - ieee80211_mle_common_size(_data))
 
+/* NAN operation mode, as defined in Wi-Fi Aware (TM) specification Table 81 */
+#define NAN_OP_MODE_PHY_MODE_VHT	0x01
+#define NAN_OP_MODE_PHY_MODE_HE		0x10
+#define NAN_OP_MODE_PHY_MODE_MASK	0x11
+#define NAN_OP_MODE_80P80MHZ		0x02
+#define NAN_OP_MODE_160MHZ		0x04
+#define NAN_OP_MODE_PNDL_SUPPRTED	0x08
+
+/* NAN Device capabilities, as defined in Wi-Fi Aware (TM) specification
+ * Table 79
+ */
+#define NAN_DEV_CAPA_DFS_OWNER			0x01
+#define NAN_DEV_CAPA_EXT_KEY_ID_SUPPORTED	0x02
+#define NAN_DEV_CAPA_SIM_NDP_RX_SUPPORTED	0x04
+#define NAN_DEV_CAPA_NDPE_SUPPORTED		0x08
+#define NAN_DEV_CAPA_S3_SUPPORTED		0x10
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b10bd31bdd6..e30c1886c530 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5711,6 +5711,42 @@ struct wiphy_radio {
 	u32 antenna_mask;
 };
 
+/**
+ * enum wiphy_nan_flags - NAN capabilities
+ *
+ * @WIPHY_NAN_FLAGS_CONFIGURABLE_SYNC: Device supports NAN configurable
+ *     synchronization.
+ * @WIPHY_NAN_FLAGS_USERSPACE_DE: Device doesn't support DE offload.
+ */
+enum wiphy_nan_flags {
+	WIPHY_NAN_FLAGS_CONFIGURABLE_SYNC = BIT(0),
+	WIPHY_NAN_FLAGS_USERSPACE_DE   = BIT(1),
+};
+
+/**
+ * struct wiphy_nan_capa - NAN capabilities
+ *
+ * This structure describes the NAN capabilities of a wiphy.
+ *
+ * @flags: NAN capabilities flags, see &enum wiphy_nan_flags
+ * @op_mode: NAN operation mode, as defined in Wi-Fi Aware (TM) specification
+ *     Table 81.
+ * @n_antennas: number of antennas supported by the device for Tx/Rx. Lower
+ *     nibble indicates the number of TX antennas and upper nibble indicates the
+ *     number of RX antennas. Value 0 indicates the information is not
+ *     available.
+ * @max_channel_switch_time: maximum channel switch time in milliseconds.
+ * @dev_capabilities: NAN device capabilities as defined in Wi-Fi Aware (TM)
+ *     specification Table 79 (Capabilities field).
+ */
+struct wiphy_nan_capa {
+	u32 flags;
+	u8 op_mode;
+	u8 n_antennas;
+	u16 max_channel_switch_time;
+	u8 dev_capabilities;
+};
+
 #define CFG80211_HW_TIMESTAMP_ALL_PEERS	0xffff
 
 /**
@@ -5884,6 +5920,7 @@ struct wiphy_radio {
  *	bitmap of &enum nl80211_band values.  For instance, for
  *	NL80211_BAND_2GHZ, bit 0 would be set
  *	(i.e. BIT(NL80211_BAND_2GHZ)).
+ * @nan_capa: NAN capabilities
  *
  * @txq_limit: configuration of internal TX queue frame limit
  * @txq_memory_limit: configuration internal TX queue memory limit
@@ -6065,6 +6102,7 @@ struct wiphy {
 	u32 bss_select_support;
 
 	u8 nan_supported_bands;
+	struct wiphy_nan_capa nan_capa;
 
 	u32 txq_limit;
 	u32 txq_memory_limit;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 904a725a4f4a..bcd18ae59e84 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2605,6 +2605,41 @@ fail:
 	return -ENOBUFS;
 }
 
+static int nl80211_put_nan_capa(struct wiphy *wiphy, struct sk_buff *msg)
+{
+	struct nlattr *nan_caps;
+
+	nan_caps = nla_nest_start(msg, NL80211_ATTR_NAN_CAPABILITIES);
+	if (!nan_caps)
+		return -ENOBUFS;
+
+	if (wiphy->nan_capa.flags & WIPHY_NAN_FLAGS_CONFIGURABLE_SYNC &&
+	    nla_put_flag(msg, NL80211_NAN_CAPA_CONFIGURABLE_SYNC))
+		goto fail;
+
+	if ((wiphy->nan_capa.flags & WIPHY_NAN_FLAGS_USERSPACE_DE) &&
+	    nla_put_flag(msg, NL80211_NAN_CAPA_USERSPACE_DE))
+		goto fail;
+
+	if (nla_put_u8(msg, NL80211_NAN_CAPA_OP_MODE,
+		       wiphy->nan_capa.op_mode) ||
+	    nla_put_u8(msg, NL80211_NAN_CAPA_NUM_ANTENNAS,
+		       wiphy->nan_capa.n_antennas) ||
+	    nla_put_u16(msg, NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME,
+			wiphy->nan_capa.max_channel_switch_time) ||
+	    nla_put_u8(msg, NL80211_NAN_CAPA_CAPABILITIES,
+		       wiphy->nan_capa.dev_capabilities))
+		goto fail;
+
+	nla_nest_end(msg, nan_caps);
+
+	return 0;
+
+fail:
+	nla_nest_cancel(msg, nan_caps);
+	return -ENOBUFS;
+}
+
 struct nl80211_dump_wiphy_state {
 	s64 filter_wiphy;
 	long start;
@@ -3257,6 +3292,12 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		if (nl80211_put_radios(&rdev->wiphy, msg))
 			goto nla_put_failure;
 
+		state->split_start++;
+		break;
+	case 18:
+		if (nl80211_put_nan_capa(&rdev->wiphy, msg))
+			goto nla_put_failure;
+
 		/* done */
 		state->split_start = 0;
 		break;