net: dsa: lantiq_gswip: permit dynamic changes to VLAN filtering state

The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.

The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c58759074fb699581336dc2c2c6bf106257b134e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 12 insertions, 27 deletions

diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.c b/drivers/net/dsa/lantiq/lantiq_gswip.c
index 30cff623bec0..58fdd54094d6 100644
--- a/drivers/net/dsa/lantiq/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq/lantiq_gswip.c
@@ -590,16 +590,8 @@ static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
 				     bool vlan_filtering,
 				     struct netlink_ext_ack *extack)
 {
-	struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port));
 	struct gswip_priv *priv = ds->priv;
 
-	/* Do not allow changing the VLAN filtering options while in bridge */
-	if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) {
-		NL_SET_ERR_MSG_MOD(extack,
-				   "Dynamic toggling of vlan_filtering not supported");
-		return -EIO;
-	}
-
 	if (vlan_filtering) {
 		/* Use tag based VLAN */
 		gswip_switch_mask(priv,
@@ -927,18 +919,15 @@ static int gswip_port_bridge_join(struct dsa_switch *ds, int port,
 	struct gswip_priv *priv = ds->priv;
 	int err;
 
-	/* When the bridge uses VLAN filtering we have to configure VLAN
-	 * specific bridges. No bridge is configured here.
+	/* Set up the VLAN for VLAN-unaware bridging for this port, and remove
+	 * it from the "single-port bridge" through which it was operating as
+	 * standalone.
 	 */
-	if (!br_vlan_enabled(br)) {
-		err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID,
-				     true, true, false);
-		if (err)
-			return err;
-		priv->port_vlan_filter &= ~BIT(port);
-	} else {
-		priv->port_vlan_filter |= BIT(port);
-	}
+	err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID,
+			     true, true, false);
+	if (err)
+		return err;
+
 	return gswip_add_single_port_br(priv, port, false);
 }
 
@@ -948,14 +937,11 @@ static void gswip_port_bridge_leave(struct dsa_switch *ds, int port,
 	struct net_device *br = bridge.dev;
 	struct gswip_priv *priv = ds->priv;
 
-	gswip_add_single_port_br(priv, port, true);
-
-	/* When the bridge uses VLAN filtering we have to configure VLAN
-	 * specific bridges. No bridge is configured here.
+	/* Add the port back to the "single-port bridge", and remove it from
+	 * the VLAN-unaware PVID created for this bridge.
 	 */
-	if (!br_vlan_enabled(br))
-		gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, true,
-				  false);
+	gswip_add_single_port_br(priv, port, true);
+	gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, true, false);
 }
 
 static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.h b/drivers/net/dsa/lantiq/lantiq_gswip.h
index 6aae1ff2f130..4590a1a7dbd9 100644
--- a/drivers/net/dsa/lantiq/lantiq_gswip.h
+++ b/drivers/net/dsa/lantiq/lantiq_gswip.h
@@ -270,7 +270,6 @@ struct gswip_priv {
 	struct gswip_vlan vlans[64];
 	int num_gphy_fw;
 	struct gswip_gphy_fw *gphy_fw;
-	u32 port_vlan_filter;
 	struct mutex pce_table_lock;
 	u16 version;
 };