Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2016-10-08 07:16:16 +0300
committer: Linus Torvalds <torvalds@linux-foundation.org> 2016-10-08 07:16:16 +0300
commit: a771151a8323a5ca81f443a9a439851b8a872c85 (patch)
tree: e1cd1a77beae03bb03ec238c227ae26199998dc7
parent: 997b611baf7591ea5119539ee821a3e2f4fcf24e (diff)
parent: e13688fe618881dd407a68dfbd2295d70b21a445 (diff)
download: linux-a771151a8323a5ca81f443a9a439851b8a872c85.tar.xz
101 files changed, 105 insertions, 8108 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3cd9042fbb62..125657b602a4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -279,10 +279,9 @@ config PHYS_OFFSET
 			ARCH_INTEGRATOR || \
 			ARCH_IOP13XX || \
 			ARCH_KS8695 || \
-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+			ARCH_REALVIEW
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x20000000 if ARCH_S5PV210
-	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 	default 0xc0000000 if ARCH_SA1100
 	help
 	  Please provide the physical address corresponding to the
@@ -338,6 +337,7 @@ config ARCH_MULTIPLATFORM
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
+	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 9083399a8ab1..5f013c9fc1ed 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -22,14 +22,13 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 433eebb4103f..9a6390c172d6 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -20,9 +20,7 @@ CONFIG_INTEGRATOR_CM720T=y
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MACH_IMX1_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5204395efda8..841e924143f9 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -55,7 +55,6 @@ config SOC_AT91RM9200
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
-	select MIGHT_HAVE_PCI
 	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 6c6d5e76565b..fe627cbcfdc5 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,8 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
 	  This enables support for the LSI Axxia devices.
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
deleted file mode 100644
index ba3d7d1b28f8..000000000000
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/autcpu12.c
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-/* NOR flash */
-#define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
-
-/* Board specific hardware definitions */
-#define AUTCPU12_CHAR_LCD_BASE	(CS1_PHYS_BASE + 0x00000000)
-#define AUTCPU12_CSAUX1_BASE	(CS1_PHYS_BASE + 0x04000000)
-#define AUTCPU12_CAN_BASE	(CS1_PHYS_BASE + 0x08000000)
-#define AUTCPU12_TOUCH_BASE	(CS1_PHYS_BASE + 0x0a000000)
-#define AUTCPU12_IO_BASE	(CS1_PHYS_BASE + 0x0c000000)
-#define AUTCPU12_LPT_BASE	(CS1_PHYS_BASE + 0x0e000000)
-
-/* NVRAM */
-#define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
-
-/* SmartMedia flash */
-#define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
-#define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
-
-/* Ethernet */
-#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
-
-/* NAND flash */
-#define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-#define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
-#define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
-#define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
-#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
-
-/* LCD contrast digital potentiometer */
-#define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
-#define AUTCPU12_DPOT_CLK	CLPS711X_GPIO(4, 1)
-#define AUTCPU12_DPOT_UD	CLPS711X_GPIO(4, 2)
-
-static struct resource autcpu12_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
-};
-
-static struct resource autcpu12_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
-};
-
-static struct mtd_partition autcpu12_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata,
-					 size_t sz)
-{
-	switch (sz) {
-	case SZ_16M:
-	case SZ_32M:
-		break;
-	case SZ_64M:
-	case SZ_128M:
-		pdata->parts[0].size = SZ_16M;
-		break;
-	default:
-		pr_warn("Unsupported SmartMedia device size %u\n", sz);
-		break;
-	}
-}
-
-static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = {
-	.gpio_rdy	= AUTCPU12_SMC_RDY,
-	.gpio_nce	= AUTCPU12_SMC_NCE,
-	.gpio_ale	= AUTCPU12_SMC_ALE,
-	.gpio_cle	= AUTCPU12_SMC_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 20,
-	.parts		= autcpu12_nand_parts,
-	.num_parts	= ARRAY_SIZE(autcpu12_nand_parts),
-	.adjust_parts	= autcpu12_adjust_parts,
-};
-
-static struct platform_device autcpu12_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= autcpu12_nand_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nand_resource),
-	.dev		= {
-		.platform_data = &autcpu12_nand_pdata,
-	},
-};
-
-static struct resource autcpu12_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"),
-};
-
-static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = {
-	.base	= AUTCPU12_MMGPIO_BASE,
-	.ngpio	= 8,
-};
-
-static struct platform_device autcpu12_mmgpio_pdev __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= autcpu12_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_mmgpio_resource),
-	.dev		= {
-		.platform_data = &autcpu12_mmgpio_pdata,
-	},
-};
-
-static const struct gpio const autcpu12_gpios[] __initconst = {
-	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
-	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
-	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
-};
-
-static struct mtd_partition autcpu12_flash_partitions[] = {
-	{
-		.name	= "NOR.0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data autcpu12_flash_pdata = {
-	.width		= 4,
-	.parts		= autcpu12_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(autcpu12_flash_partitions),
-};
-
-static struct resource autcpu12_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M),
-};
-
-static struct platform_device autcpu12_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= autcpu12_flash_resources,
-	.num_resources	= ARRAY_SIZE(autcpu12_flash_resources),
-	.dev		= {
-		.platform_data	= &autcpu12_flash_pdata,
-	},
-};
-
-static struct resource autcpu12_nvram_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0),
-};
-
-static struct platdata_mtd_ram autcpu12_nvram_pdata = {
-	.bankwidth	= 4,
-};
-
-static struct platform_device autcpu12_nvram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= autcpu12_nvram_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
-	.dev		= {
-		.platform_data	= &autcpu12_nvram_pdata,
-	},
-};
-
-static void __init autcpu12_nvram_init(void)
-{
-	void __iomem *nvram;
-	unsigned int save[2];
-	resource_size_t nvram_size = SZ_128K;
-
-	/*
-	 * Check for 32K/128K
-	 * Read ofs 0K
-	 * Read ofs 64K
-	 * Write complement to ofs 64K
-	 * Read and check result on ofs 0K
-	 * Restore contents
-	 */
-	nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K);
-	if (nvram) {
-		save[0] = readl(nvram + 0);
-		save[1] = readl(nvram + SZ_64K);
-		writel(~save[0], nvram + SZ_64K);
-		if (readl(nvram + 0) != save[0]) {
-			writel(save[0], nvram + 0);
-			nvram_size = SZ_32K;
-		} else
-			writel(save[1], nvram + SZ_64K);
-		iounmap(nvram);
-
-		autcpu12_nvram_resource[0].end =
-			autcpu12_nvram_resource[0].start + nvram_size - 1;
-		platform_device_register(&autcpu12_nvram_pdev);
-	} else
-		pr_err("Failed to remap NVRAM resource\n");
-}
-
-static void __init autcpu12_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&autcpu12_flash_pdev);
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
-					ARRAY_SIZE(autcpu12_cs8900_resource));
-	platform_device_register(&autcpu12_mmgpio_pdev);
-	autcpu12_nvram_init();
-}
-
-static void __init autcpu12_init_late(void)
-{
-	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-	platform_device_register(&autcpu12_nand_pdev);
-}
-
-MACHINE_START(AUTCPU12, "autronix autcpu12")
-	/* Maintainer: Thomas Gleixner */
-	.atag_offset	= 0x20000,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= autcpu12_init,
-	.init_late	= autcpu12_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
deleted file mode 100644
index 972abdb10028..000000000000
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/cdb89712.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define CDB89712_CS8900_IRQ	(IRQ_EINT3)
-
-static struct resource cdb89712_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(CDB89712_CS8900_IRQ),
-};
-
-static struct mtd_partition cdb89712_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_flash_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_flash_partitions),
-};
-
-static struct resource cdb89712_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M),
-};
-
-static struct platform_device cdb89712_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= cdb89712_flash_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_flash_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_flash_pdata,
-	},
-};
-
-static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = {
-	{
-		.name	= "BootROM",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_bootrom_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_bootrom_partitions),
-};
-
-static struct resource cdb89712_bootrom_resources[] __initdata = {
-	DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
-			 IORESOURCE_READONLY),
-};
-
-static struct platform_device cdb89712_bootrom_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.resource	= cdb89712_bootrom_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_bootrom_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_bootrom_pdata,
-	},
-};
-
-static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = {
-	.bankwidth	= 4,
-};
-
-static struct resource cdb89712_sram_resources[] __initdata = {
-	DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE),
-};
-
-static struct platform_device cdb89712_sram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= cdb89712_sram_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_sram_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_sram_pdata,
-	},
-};
-
-static void __init cdb89712_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&cdb89712_flash_pdev);
-	platform_device_register(&cdb89712_bootrom_pdev);
-	platform_device_register(&cdb89712_sram_pdev);
-	platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource,
-					ARRAY_SIZE(cdb89712_cs8900_resource));
-}
-
-MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	/* Maintainer: Ray Lehtiniemi */
-	.atag_offset	= 0x100,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= cdb89712_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
deleted file mode 100644
index f9ca22b646bf..000000000000
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/clep7312.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/memblock.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices.h"
-
-static void __init
-fixup_clep7312(struct tag *tags, char **cmdline)
-{
-	memblock_add(0xc0000000, 0x01000000);
-}
-
-MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	/* Maintainer: Nobody */
-	.atag_offset	= 0x0100,
-	.fixup		= fixup_clep7312,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
deleted file mode 100644
index f33979784f38..000000000000
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/memblock.h>
-#include <linux/types.h>
-#include <linux/i2c-gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define VIDEORAM_SIZE		SZ_128K
-
-#define EDB7211_LCD_DC_DC_EN	CLPS711X_GPIO(3, 1)
-#define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
-#define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
-
-#define EDB7211_I2C_SDA		CLPS711X_GPIO(3, 4)
-#define EDB7211_I2C_SCL		CLPS711X_GPIO(3, 5)
-
-#define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
-#define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
-
-#define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define EDB7211_CS8900_IRQ	(IRQ_EINT3)
-
-/* The extra 8 lines of the keyboard matrix */
-#define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
-
-static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = {
-	.sda_pin	= EDB7211_I2C_SDA,
-	.scl_pin	= EDB7211_I2C_SCL,
-	.scl_is_output_only = 1,
-};
-
-static struct resource edb7211_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
-};
-
-static struct mtd_partition edb7211_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data edb7211_flash_pdata __initdata = {
-	.width		= 4,
-	.parts		= edb7211_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(edb7211_flash_partitions),
-};
-
-static struct resource edb7211_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M),
-	DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M),
-};
-
-static struct platform_device edb7211_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= edb7211_flash_resources,
-	.num_resources	= ARRAY_SIZE(edb7211_flash_resources),
-	.dev	= {
-		.platform_data	= &edb7211_flash_pdata,
-	},
-};
-
-static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(EDB7211_LCDEN, 1);
-		udelay(100);
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 1);
-	} else {
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 0);
-		udelay(100);
-		gpio_set_value(EDB7211_LCDEN, 0);
-	}
-}
-
-static struct plat_lcd_data edb7211_lcd_power_pdata = {
-	.set_power	= edb7211_lcd_power_set,
-};
-
-static struct pwm_lookup edb7211_pwm_lookup[] = {
-	PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
-		   0, PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pwm_bl_pdata = {
-	.dft_brightness	= 0x01,
-	.max_brightness	= 0x0f,
-	.enable_gpio	= EDB7211_LCDBL,
-};
-
-static struct resource clps711x_pwm_res =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
-
-static struct gpio edb7211_gpios[] __initconst = {
-	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
-	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
-};
-
-/* Reserve screen memory region at the start of main system memory. */
-static void __init edb7211_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE);
-}
-
-static void __init
-fixup_edb7211(struct tag *tags, char **cmdline)
-{
-	/*
-	 * Bank start addresses are not present in the information
-	 * passed in from the boot loader.  We could potentially
-	 * detect them, but instead we hard-code them.
-	 *
-	 * Banks sizes _are_ present in the param block, but we're
-	 * not using that information yet.
-	 */
-	memblock_add(0xc0000000, SZ_8M);
-	memblock_add(0xc1000000, SZ_8M);
-}
-
-static void __init edb7211_init_late(void)
-{
-	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
-
-	platform_device_register(&edb7211_flash_pdev);
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &edb7211_lcd_power_pdata,
-				      sizeof(edb7211_lcd_power_pdata));
-
-	platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
-					&clps711x_pwm_res, 1);
-	pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
-
-	platform_device_register_data(&platform_bus, "pwm-backlight", 0,
-				      &pwm_bl_pdata, sizeof(pwm_bl_pdata));
-
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
-					ARRAY_SIZE(edb7211_cs8900_resource));
-	platform_device_register_data(NULL, "i2c-gpio", 0,
-				      &edb7211_i2c_pdata,
-				      sizeof(edb7211_i2c_pdata));
-}
-
-MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	/* Maintainer: Jon McClintock */
-	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.fixup		= fixup_edb7211,
-	.reserve	= edb7211_reserve,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.init_late	= edb7211_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
deleted file mode 100644
index 80a16a8b3776..000000000000
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/p720t.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-#include <linux/sizes.h>
-#include <linux/backlight.h>
-#include <linux/gpio/driver.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define P720T_USERLED		CLPS711X_GPIO(3, 0)
-#define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
-#define P720T_NAND_ALE		CLPS711X_GPIO(4, 1)
-#define P720T_NAND_NCE		CLPS711X_GPIO(4, 2)
-
-#define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
-
-#define P720T_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-
-#define SYSPLD_PHYS_BASE	IOMEM(CS1_PHYS_BASE)
-
-#define PLD_INT			(SYSPLD_PHYS_BASE + 0x000000)
-#define PLD_INT_MMGPIO_BASE	(P720T_MMGPIO_BASE + 0)
-#define PLD_INT_PENIRQ		(PLD_INT_MMGPIO_BASE + 5)
-#define PLD_INT_UCB_IRQ		(PLD_INT_MMGPIO_BASE + 1)
-#define PLD_INT_KBD_ATN		(PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
-
-#define PLD_PWR			(SYSPLD_PHYS_BASE + 0x000004)
-#define PLD_PWR_MMGPIO_BASE	(P720T_MMGPIO_BASE + 8)
-#define PLD_PWR_EXT		(PLD_PWR_MMGPIO_BASE + 5)
-#define PLD_PWR_MODE		(PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
-#define PLD_S3_ON		(PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
-#define PLD_S2_ON		(PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
-#define PLD_S1_ON		(PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
-
-#define PLD_KBD			(SYSPLD_PHYS_BASE + 0x000008)
-#define PLD_KBD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 16)
-#define PLD_KBD_WAKE		(PLD_KBD_MMGPIO_BASE + 1)
-#define PLD_KBD_EN		(PLD_KBD_MMGPIO_BASE + 0)
-
-#define PLD_SPI			(SYSPLD_PHYS_BASE + 0x00000c)
-#define PLD_SPI_MMGPIO_BASE	(P720T_MMGPIO_BASE + 24)
-#define PLD_SPI_EN		(PLD_SPI_MMGPIO_BASE + 0)
-
-#define PLD_IO			(SYSPLD_PHYS_BASE + 0x000010)
-#define PLD_IO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 32)
-#define PLD_IO_BOOTSEL		(PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
-#define PLD_IO_USER		(PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
-#define PLD_IO_LED3		(PLD_IO_MMGPIO_BASE + 4)
-#define PLD_IO_LED2		(PLD_IO_MMGPIO_BASE + 3)
-#define PLD_IO_LED1		(PLD_IO_MMGPIO_BASE + 2)
-#define PLD_IO_LED0		(PLD_IO_MMGPIO_BASE + 1)
-#define PLD_IO_LEDEN		(PLD_IO_MMGPIO_BASE + 0)
-
-#define PLD_IRDA		(SYSPLD_PHYS_BASE + 0x000014)
-#define PLD_IRDA_MMGPIO_BASE	(P720T_MMGPIO_BASE + 40)
-#define PLD_IRDA_EN		(PLD_IRDA_MMGPIO_BASE + 0)
-
-#define PLD_COM2		(SYSPLD_PHYS_BASE + 0x000018)
-#define PLD_COM2_MMGPIO_BASE	(P720T_MMGPIO_BASE + 48)
-#define PLD_COM2_EN		(PLD_COM2_MMGPIO_BASE + 0)
-
-#define PLD_COM1		(SYSPLD_PHYS_BASE + 0x00001c)
-#define PLD_COM1_MMGPIO_BASE	(P720T_MMGPIO_BASE + 56)
-#define PLD_COM1_EN		(PLD_COM1_MMGPIO_BASE + 0)
-
-#define PLD_AUD			(SYSPLD_PHYS_BASE + 0x000020)
-#define PLD_AUD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 64)
-#define PLD_AUD_DIV1		(PLD_AUD_MMGPIO_BASE + 6)
-#define PLD_AUD_DIV0		(PLD_AUD_MMGPIO_BASE + 5)
-#define PLD_AUD_CLK_SEL1	(PLD_AUD_MMGPIO_BASE + 4)
-#define PLD_AUD_CLK_SEL0	(PLD_AUD_MMGPIO_BASE + 3)
-#define PLD_AUD_MIC_PWR		(PLD_AUD_MMGPIO_BASE + 2)
-#define PLD_AUD_MIC_GAIN	(PLD_AUD_MMGPIO_BASE + 1)
-#define PLD_AUD_CODEC_EN	(PLD_AUD_MMGPIO_BASE + 0)
-
-#define PLD_CF			(SYSPLD_PHYS_BASE + 0x000024)
-#define PLD_CF_MMGPIO_BASE	(P720T_MMGPIO_BASE + 72)
-#define PLD_CF2_SLEEP		(PLD_CF_MMGPIO_BASE + 5)
-#define PLD_CF1_SLEEP		(PLD_CF_MMGPIO_BASE + 4)
-#define PLD_CF2_nPDREQ		(PLD_CF_MMGPIO_BASE + 3)
-#define PLD_CF1_nPDREQ		(PLD_CF_MMGPIO_BASE + 2)
-#define PLD_CF2_nIRQ		(PLD_CF_MMGPIO_BASE + 1)
-#define PLD_CF1_nIRQ		(PLD_CF_MMGPIO_BASE + 0)
-
-#define PLD_SDC			(SYSPLD_PHYS_BASE + 0x000028)
-#define PLD_SDC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 80)
-#define PLD_SDC_INT_EN		(PLD_SDC_MMGPIO_BASE + 2)
-#define PLD_SDC_WP		(PLD_SDC_MMGPIO_BASE + 1)
-#define PLD_SDC_CD		(PLD_SDC_MMGPIO_BASE + 0)
-
-#define PLD_CODEC		(SYSPLD_PHYS_BASE + 0x400000)
-#define PLD_CODEC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 88)
-#define PLD_CODEC_IRQ3		(PLD_CODEC_MMGPIO_BASE + 4)
-#define PLD_CODEC_IRQ2		(PLD_CODEC_MMGPIO_BASE + 3)
-#define PLD_CODEC_IRQ1		(PLD_CODEC_MMGPIO_BASE + 2)
-#define PLD_CODEC_EN		(PLD_CODEC_MMGPIO_BASE + 0)
-
-#define PLD_BRITE		(SYSPLD_PHYS_BASE + 0x400004)
-#define PLD_BRITE_MMGPIO_BASE	(P720T_MMGPIO_BASE + 96)
-#define PLD_BRITE_UP		(PLD_BRITE_MMGPIO_BASE + 1)
-#define PLD_BRITE_DN		(PLD_BRITE_MMGPIO_BASE + 0)
-
-#define PLD_LCDEN		(SYSPLD_PHYS_BASE + 0x400008)
-#define PLD_LCDEN_MMGPIO_BASE	(P720T_MMGPIO_BASE + 104)
-#define PLD_LCDEN_EN		(PLD_LCDEN_MMGPIO_BASE + 0)
-
-#define PLD_TCH			(SYSPLD_PHYS_BASE + 0x400010)
-#define PLD_TCH_MMGPIO_BASE	(P720T_MMGPIO_BASE + 112)
-#define PLD_TCH_PENIRQ		(PLD_TCH_MMGPIO_BASE + 1)
-#define PLD_TCH_EN		(PLD_TCH_MMGPIO_BASE + 0)
-
-#define PLD_GPIO		(SYSPLD_PHYS_BASE + 0x400014)
-#define PLD_GPIO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 120)
-#define PLD_GPIO2		(PLD_GPIO_MMGPIO_BASE + 2)
-#define PLD_GPIO1		(PLD_GPIO_MMGPIO_BASE + 1)
-#define PLD_GPIO0		(PLD_GPIO_MMGPIO_BASE + 0)
-
-static struct gpio p720t_gpios[] __initconst = {
-	{ PLD_S1_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S1_ON" },
-	{ PLD_S2_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S2_ON" },
-	{ PLD_S3_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S3_ON" },
-	{ PLD_S4_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S4_ON" },
-	{ PLD_KBD_EN,	GPIOF_OUT_INIT_LOW,	"PLD_KBD_EN" },
-	{ PLD_SPI_EN,	GPIOF_OUT_INIT_LOW,	"PLD_SPI_EN" },
-	{ PLD_IO_USER,	GPIOF_OUT_INIT_LOW,	"PLD_IO_USER" },
-	{ PLD_IO_LED0,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED0" },
-	{ PLD_IO_LED1,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED1" },
-	{ PLD_IO_LED2,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED2" },
-	{ PLD_IO_LED3,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED3" },
-	{ PLD_IO_LEDEN,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LEDEN" },
-	{ PLD_IRDA_EN,	GPIOF_OUT_INIT_LOW,	"PLD_IRDA_EN" },
-	{ PLD_COM1_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM1_EN" },
-	{ PLD_COM2_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM2_EN" },
-	{ PLD_CODEC_EN,	GPIOF_OUT_INIT_LOW,	"PLD_CODEC_EN" },
-	{ PLD_LCDEN_EN,	GPIOF_OUT_INIT_LOW,	"PLD_LCDEN_EN" },
-	{ PLD_TCH_EN,	GPIOF_OUT_INIT_LOW,	"PLD_TCH_EN" },
-	{ P720T_USERLED,GPIOF_OUT_INIT_LOW,	"USER_LED" },
-};
-
-static struct resource p720t_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(0, 4, "dat"),
-};
-
-static struct bgpio_pdata p720t_mmgpio_pdata = {
-	.ngpio	= 8,
-};
-
-static struct platform_device p720t_mmgpio __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= p720t_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(p720t_mmgpio_resource),
-	.dev		= {
-		.platform_data	= &p720t_mmgpio_pdata,
-	},
-};
-
-static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
-{
-	p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
-	p720t_mmgpio_pdata.base = gpiobase;
-
-	platform_device_register(&p720t_mmgpio);
-}
-
-static struct {
-	void __iomem	*addrbase;
-	int		gpiobase;
-} mmgpios[] __initconst = {
-	{ PLD_INT,	PLD_INT_MMGPIO_BASE },
-	{ PLD_PWR,	PLD_PWR_MMGPIO_BASE },
-	{ PLD_KBD,	PLD_KBD_MMGPIO_BASE },
-	{ PLD_SPI,	PLD_SPI_MMGPIO_BASE },
-	{ PLD_IO,	PLD_IO_MMGPIO_BASE },
-	{ PLD_IRDA,	PLD_IRDA_MMGPIO_BASE },
-	{ PLD_COM2,	PLD_COM2_MMGPIO_BASE },
-	{ PLD_COM1,	PLD_COM1_MMGPIO_BASE },
-	{ PLD_AUD,	PLD_AUD_MMGPIO_BASE },
-	{ PLD_CF,	PLD_CF_MMGPIO_BASE },
-	{ PLD_SDC,	PLD_SDC_MMGPIO_BASE },
-	{ PLD_CODEC,	PLD_CODEC_MMGPIO_BASE },
-	{ PLD_BRITE,	PLD_BRITE_MMGPIO_BASE },
-	{ PLD_LCDEN,	PLD_LCDEN_MMGPIO_BASE },
-	{ PLD_TCH,	PLD_TCH_MMGPIO_BASE },
-	{ PLD_GPIO,	PLD_GPIO_MMGPIO_BASE },
-};
-
-static struct resource p720t_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
-};
-
-static struct mtd_partition p720t_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct gpio_nand_platdata p720t_nand_pdata __initdata = {
-	.gpio_rdy	= -1,
-	.gpio_nce	= P720T_NAND_NCE,
-	.gpio_ale	= P720T_NAND_ALE,
-	.gpio_cle	= P720T_NAND_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 15,
-	.parts		= p720t_nand_parts,
-	.num_parts	= ARRAY_SIZE(p720t_nand_parts),
-};
-
-static struct platform_device p720t_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= p720t_nand_resource,
-	.num_resources	= ARRAY_SIZE(p720t_nand_resource),
-	.dev		= {
-		.platform_data = &p720t_nand_pdata,
-	},
-};
-
-static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(PLD_LCDEN_EN, 1);
-		gpio_set_value(PLD_S1_ON, 1);
-		gpio_set_value(PLD_S2_ON, 1);
-		gpio_set_value(PLD_S4_ON, 1);
-	} else {
-		gpio_set_value(PLD_S1_ON, 0);
-		gpio_set_value(PLD_S2_ON, 0);
-		gpio_set_value(PLD_S4_ON, 0);
-		gpio_set_value(PLD_LCDEN_EN, 0);
-	}
-}
-
-static struct plat_lcd_data p720t_lcd_power_pdata = {
-	.set_power	= p720t_lcd_power_set,
-};
-
-static void p720t_lcd_backlight_set_intensity(int intensity)
-{
-	gpio_set_value(PLD_S3_ON, intensity);
-}
-
-static struct generic_bl_info p720t_lcd_backlight_pdata = {
-	.name			= "lcd-backlight.0",
-	.default_intensity	= 0x01,
-	.max_intensity		= 0x01,
-	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
-};
-
-static void __init
-fixup_p720t(struct tag *tag, char **cmdline)
-{
-	/*
-	 * Our bootloader doesn't setup any tags (yet).
-	 */
-	if (tag->hdr.tag != ATAG_CORE) {
-		tag->hdr.tag = ATAG_CORE;
-		tag->hdr.size = tag_size(tag_core);
-		tag->u.core.flags = 0;
-		tag->u.core.pagesize = PAGE_SIZE;
-		tag->u.core.rootdev = 0x0100;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = 4096;
-		tag->u.mem.start = PHYS_OFFSET;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_NONE;
-		tag->hdr.size = 0;
-	}
-}
-
-static struct gpio_led p720t_gpio_leds[] = {
-	{
-		.name			= "User LED",
-		.default_trigger	= "heartbeat",
-		.gpio			= P720T_USERLED,
-	},
-};
-
-static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
-	.leds		= p720t_gpio_leds,
-	.num_leds	= ARRAY_SIZE(p720t_gpio_leds),
-};
-
-static void __init p720t_init(void)
-{
-	int i;
-
-	clps711x_devices_init();
-
-	for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
-		p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
-
-	platform_device_register(&p720t_nand_pdev);
-}
-
-static void __init p720t_init_late(void)
-{
-	WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &p720t_lcd_power_pdata,
-				      sizeof(p720t_lcd_power_pdata));
-	platform_device_register_data(NULL, "generic-bl", 0,
-				      &p720t_lcd_backlight_pdata,
-				      sizeof(p720t_lcd_backlight_pdata));
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_data(NULL, "leds-gpio", 0,
-				      &p720t_gpio_led_pdata,
-				      sizeof(p720t_gpio_led_pdata));
-}
-
-MACHINE_START(P720T, "ARM-Prospector720T")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= fixup_p720t,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= p720t_init,
-	.init_late	= p720t_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
deleted file mode 100644
index 6466da8f3c11..000000000000
--- a/arch/arm/mach-clps711x/common.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/core.c
- *
- *  Core support for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
-		.length		= 48 * SZ_1K,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
-
-void __init clps711x_init_irq(void)
-{
-	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
-}
-
-void __init clps711x_timer_init(void)
-{
-	clps711x_clk_init(CLPS711X_VIRT_BASE);
-	clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D,
-			     CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI);
-}
-
-void clps711x_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
deleted file mode 100644
index 370200b26333..000000000000
--- a/arch/arm/mach-clps711x/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/common.h
- *
- * Common bits.
- */
-
-#include <linux/reboot.h>
-
-#define CLPS711X_NR_GPIO	(4 * 8 + 3)
-#define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
-
-extern void clps711x_map_io(void);
-extern void clps711x_init_irq(void);
-extern void clps711x_timer_init(void);
-extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
-
-/* drivers/irqchip/irq-clps711x.c */
-void clps711x_intc_init(phys_addr_t, resource_size_t);
-/* drivers/clk/clk-clps711x.c */
-void clps711x_clk_init(void __iomem *base);
-/* drivers/clocksource/clps711x-timer.c */
-void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
-			  unsigned int irq);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
deleted file mode 100644
index 77a9617c216d..000000000000
--- a/arch/arm/mach-clps711x/devices.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/of_fdt.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/sizes.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-
-#include <asm/system_info.h>
-
-#include <mach/hardware.h>
-
-static const struct resource clps711x_cpuidle_res __initconst =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
-
-static void __init clps711x_add_cpuidle(void)
-{
-	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
-					&clps711x_cpuidle_res, 1);
-}
-
-static const phys_addr_t clps711x_gpios[][2] __initconst = {
-	{ PADR, PADDR },
-	{ PBDR, PBDDR },
-	{ PCDR, PCDDR },
-	{ PDDR, PDDDR },
-	{ PEDR, PEDDR },
-};
-
-static void __init clps711x_add_gpio(void)
-{
-	unsigned i;
-	struct resource gpio_res[2];
-
-	memset(gpio_res, 0, sizeof(gpio_res));
-
-	gpio_res[0].flags = IORESOURCE_MEM;
-	gpio_res[1].flags = IORESOURCE_MEM;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
-		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
-		gpio_res[0].end = gpio_res[0].start;
-		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
-		gpio_res[1].end = gpio_res[1].start;
-
-		platform_device_register_simple("clps711x-gpio", i,
-						gpio_res, ARRAY_SIZE(gpio_res));
-	}
-}
-
-const struct resource clps711x_syscon_res[] __initconst = {
-	/* SYSCON1, SYSFLG1 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128),
-	/* SYSCON2, SYSFLG2 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128),
-	/* SYSCON3 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64),
-};
-
-static void __init clps711x_add_syscon(void)
-{
-	unsigned i;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("syscon", i + 1,
-						&clps711x_syscon_res[i], 1);
-}
-
-static const struct resource clps711x_uart1_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT1),
-	DEFINE_RES_IRQ(IRQ_URXINT1),
-};
-
-static const struct resource clps711x_uart2_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT2),
-	DEFINE_RES_IRQ(IRQ_URXINT2),
-};
-
-static void __init clps711x_add_uart(void)
-{
-	platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res,
-					ARRAY_SIZE(clps711x_uart1_res));
-	platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res,
-					ARRAY_SIZE(clps711x_uart2_res));
-};
-
-static void __init clps711x_soc_init(void)
-{
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
-	void __iomem *base;
-	u32 id[5];
-
-	base = ioremap(CLPS711X_PHYS_BASE, SZ_32K);
-	if (!base)
-		return;
-
-	id[0] = readl(base + UNIQID);
-	id[1] = readl(base + RANDID0);
-	id[2] = readl(base + RANDID1);
-	id[3] = readl(base + RANDID2);
-	id[4] = readl(base + RANDID3);
-	system_rev = SYSFLG1_VERID(readl(base + SYSFLG1));
-
-	add_device_randomness(id, sizeof(id));
-
-	system_serial_low = id[0];
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		goto out_unmap;
-
-	soc_dev_attr->machine = of_flat_dt_get_machine_name();
-	soc_dev_attr->family = "Cirrus Logic CLPS711X";
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev);
-	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->revision);
-		kfree(soc_dev_attr->soc_id);
-		kfree(soc_dev_attr);
-	}
-
-out_unmap:
-	iounmap(base);
-}
-
-void __init clps711x_devices_init(void)
-{
-	clps711x_add_cpuidle();
-	clps711x_add_gpio();
-	clps711x_add_syscon();
-	clps711x_add_uart();
-	clps711x_soc_init();
-}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
deleted file mode 100644
index a5efc1744b84..000000000000
--- a/arch/arm/mach-clps711x/devices.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-void clps711x_devices_init(void);
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index eb14a0ff0093..5fd836be2701 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f820de890b4..18f0c856f290 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -126,8 +126,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
 	help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318cab31..9155b639c9aa 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config SOC_IMX1
-	bool
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-	select PINCTRL_IMX1
-
 config SOC_IMX21
 	bool
 	select CPU_ARM926T
@@ -88,7 +81,6 @@ config SOC_IMX31
 	bool
 	select CPU_V6
 	select MXC_AVIC
-	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -96,35 +88,6 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select MXC_AVIC
 	select PINCTRL_IMX35
-	select SMP_ON_UP if SMP
-
-if ARCH_MULTI_V4T
-
-comment "MX1 platforms:"
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-config MACH_APF9328
-	bool "APF9328"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Yes here if you are using the Armadeus APF9328 development board
-
-config MACH_IMX1_DT
-	bool "Support i.MX1 platforms from device tree"
-	select SOC_IMX1
-	help
-	  Include support for Freescale i.MX1 based platforms
-	  using the device tree for discovery.
-
-endif
 
 if ARCH_MULTI_V5
 
@@ -461,6 +424,18 @@ endif
 
 comment "Device tree only"
 
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+	bool "i.MX1 support"
+	select CPU_ARM920T
+	select MXC_AVIC
+	select PINCTRL_IMX1
+	help
+	  This enables support for Freescale i.MX1 processor
+
+endif
+
 if ARCH_MULTI_V5
 
 config SOC_IMX25
@@ -523,7 +498,6 @@ config SOC_IMX6Q
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
@@ -569,7 +543,6 @@ config SOC_LS1021A
 	bool "Freescale LS1021A support"
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA if ARM_LPAE
 	help
 	  This enables support for Freescale LS1021A processor.
@@ -585,7 +558,6 @@ config SOC_VF610
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select SMP_ON_UP if SMP
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9f5fffd62702..2636adfcb999 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,6 +1,5 @@
 obj-y := cpu.o system.o irq-common.o
 
-obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
 obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
@@ -35,11 +34,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# i.MX1 based machines
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
-obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
-
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
@@ -93,6 +87,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
+obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index a8f469333027..bcca48138933 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,29 +21,24 @@ struct device_node;
 enum mxc_cpu_pwr_mode;
 struct of_device_id;
 
-void mx1_map_io(void);
 void mx21_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void imx1_init_early(void);
 void imx21_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
-void imx1_soc_init(void);
 void imx21_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
 void epit_timer_init(void __iomem *base, int irq);
-int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
deleted file mode 100644
index f9b5afc6bcd1..000000000000
--- a/arch/arm/mach-imx/devices-imx1.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_fb_data imx1_imx_fb_data;
-#define imx1_add_imx_fb(pdata) \
-    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
-#define imx1_add_imx_i2c(pdata)		\
-	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
-#define imx1_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
-#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
-#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
-
-extern const struct imx_spi_imx_data imx1_cspi_data[];
-#define imx1_add_cspi(id, pdata)   \
-	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
-
-#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
-#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index e5cf587bc1a0..aa6cee870795 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 09cebd8cef2b..6920e356f4e5 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_ssi_platform_data *pdata);
 
 #include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_3irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irqrx;
-	resource_size_t irqtx;
-	resource_size_t irqrts;
-};
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
 struct imx_imx_uart_1irq_data {
 	int id;
 	resource_size_t iobase;
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 7df6328306f9..aa00272252e0 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -19,11 +19,6 @@
 		.irq = soc ## _INT_LCDC,				\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index ae9791522fc8..9822bedb5d09 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -21,11 +21,6 @@
 #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
 	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 6962cff4a950..e3c89e9caf93 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -27,15 +27,6 @@
 		.irq = soc ## _INT_UART ## _hwid,			\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
-#define imx1_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
-	imx1_imx_uart_data_entry(0, 1),
-	imx1_imx_uart_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 #define imx21_imx_uart_data_entry(_id, _hwid)				\
@@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqrx,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqtx,
-			.end = data->irqtx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqrts,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx1-uart", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
 struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 5e9707b47f92..d93c446c9c02 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -21,15 +21,6 @@
 #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
 	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
-#define imx1_cspi_data_entry(_id, _hwid) \
-	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
-	imx1_cspi_data_entry(0, 1),
-	imx1_cspi_data_entry(1, 2),
-};
-#endif
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 #define imx21_cspi_data_entry(_id, _hwid)                            \
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index d737f95ebb07..90e10cbd8fd1 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -112,7 +112,6 @@
 #include "mx2x.h"
 #include "mx21.h"
 #include "mx27.h"
-#include "mx1.h"
 
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
@@ -121,7 +120,7 @@
 	.type = _type,							\
 }
 
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* There's an off-by-one between the gpio bank number and the gpiochip */
 /* range e.g. GPIO_1_5 is gpio 5 under linux */
 #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
 
diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h
deleted file mode 100644
index 95f4681d85d7..000000000000
--- a/arch/arm/mach-imx/iomux-mx1.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX1_H__
-#define __MACH_IOMUX_MX1_H__
-
-#include "iomux-v1.h"
-
-#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
-
-#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
index 2e4a0ddca76c..368667b32760 100644
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ b/arch/arm/mach-imx/iomux-mx3.h
@@ -598,10 +598,7 @@ enum iomux_pins {
 #define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
@@ -665,37 +662,6 @@ enum iomux_pins {
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
deleted file mode 100644
index ebbb5ab63529..000000000000
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &apf9328_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-	.flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-	{
-		.start  = MX1_CS4_PHYS + 0x00C00000,
-		.end    = MX1_CS4_PHYS + 0x00C00001,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CS4_PHYS + 0x00C00002,
-		.end    = MX1_CS4_PHYS + 0x00C00003,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &dm9000_setup,
-	}
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&apf9328_flash_device,
-	&dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(apf9328_pins,
-			ARRAY_SIZE(apf9328_pins),
-			"APF9328");
-
-	imx1_add_imx_uart0(NULL);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	imx1_add_imx_i2c(&apf9328_i2c_data);
-
-	dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-	mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-	.map_io       = mx1_map_io,
-	.init_early   = imx1_init_early,
-	.init_irq     = mx1_init_irq,
-	.init_time	= apf9328_timer_init,
-	.init_machine = apf9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c
index 6f915b0961c4..de5ab8d88549 100644
--- a/arch/arm/mach-imx/imx1-dt.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -9,8 +9,27 @@
 
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
+#include "hardware.h"
+
+#define MX1_AVIC_ADDR	0x00223000
+
+static void __init imx1_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+}
+
+static void __init imx1_init_irq(void)
+{
+	void __iomem *avic_addr;
+
+	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
+	WARN_ON(!avic_addr);
+
+	mxc_init_irq(avic_addr);
+}
 
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
@@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= mx1_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
-	.init_irq	= mx1_init_irq,
+	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 31df4361996f..e277d9c230e5 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -63,7 +63,7 @@
  */
 #define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
@@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void)
 /*
  * SMSC LAN9118
  */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 static struct smsc911x_platform_config kzm_smsc9118_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
@@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void)
 }
 #endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_IMX)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 6d879417db49..a159a7739993 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CONTRAST__CONTRAST,
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
+	MX31_PIN_LCS0__GPIO3_23,
 	/* CSI */
 	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
 	MX31_PIN_CSI_D6__CSI_D6,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
deleted file mode 100644
index 1f6bc3f7ae14..000000000000
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-mx1/mach-scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= MX1_CS5_PHYS,
-		.end	= MX1_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= MX1_CS5_PHYS + 4,
-		.end	= MX1_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		/* irq number is run-time assigned */
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static const int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-
-	imx1_add_imx_uart0(&uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-	/* Sascha Hauer */
-	.atag_offset = 100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= scb9328_timer_init,
-	.init_machine = scb9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
deleted file mode 100644
index 9a42f19be81e..000000000000
--- a/arch/arm/mach-imx/mm-imx1.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX1 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static struct map_desc imx_io_desc[] __initdata = {
-	imx_map_entry(MX1, IO, MT_DEVICE),
-};
-
-void __init mx1_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init imx1_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-			MX1_NUM_GPIO_PORT);
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-}
-
-void __init imx1_soc_init(void)
-{
-	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-	mxc_device_init();
-
-	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTA, 0);
-	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTB, 0);
-	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTC, 0);
-	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTD, 0);
-	imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
-			MX1_DMA_INT, MX1_DMA_ERR);
-	pinctrl_provide_dummies();
-}
diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h
deleted file mode 100644
index 45bd31cc34d6..000000000000
--- a/arch/arm/mach-imx/mx1.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 1997,1998 Russell King
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX1_H__
-#define __MACH_MX1_H__
-
-/*
- * Memory map
- */
-#define MX1_IO_BASE_ADDR	0x00200000
-#define MX1_IO_SIZE		SZ_1M
-
-#define MX1_CS0_PHYS		0x10000000
-#define MX1_CS0_SIZE		0x02000000
-
-#define MX1_CS1_PHYS		0x12000000
-#define MX1_CS1_SIZE		0x01000000
-
-#define MX1_CS2_PHYS		0x13000000
-#define MX1_CS2_SIZE		0x01000000
-
-#define MX1_CS3_PHYS		0x14000000
-#define MX1_CS3_SIZE		0x01000000
-
-#define MX1_CS4_PHYS		0x15000000
-#define MX1_CS4_SIZE		0x01000000
-
-#define MX1_CS5_PHYS		0x16000000
-#define MX1_CS5_SIZE		0x01000000
-
-/*
- *  Register BASEs, based on OFFSETs
- */
-#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
-#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
-#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
-#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
-#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
-#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
-#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
-#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
-#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
-#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
-#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
-#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
-#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
-#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
-#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
-#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
-#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
-#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
-#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
-#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
-#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
-#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
-#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
-#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
-
-/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
-
-/* fixed interrput numbers */
-#include <asm/irq.h>
-#define MX1_INT_SOFTINT		(NR_IRQS_LEGACY + 0)
-#define MX1_INT_CSI		(NR_IRQS_LEGACY + 6)
-#define MX1_DSPA_MAC_INT	(NR_IRQS_LEGACY + 7)
-#define MX1_DSPA_INT		(NR_IRQS_LEGACY + 8)
-#define MX1_COMP_INT		(NR_IRQS_LEGACY + 9)
-#define MX1_MSHC_XINT		(NR_IRQS_LEGACY + 10)
-#define MX1_GPIO_INT_PORTA	(NR_IRQS_LEGACY + 11)
-#define MX1_GPIO_INT_PORTB	(NR_IRQS_LEGACY + 12)
-#define MX1_GPIO_INT_PORTC	(NR_IRQS_LEGACY + 13)
-#define MX1_INT_LCDC		(NR_IRQS_LEGACY + 14)
-#define MX1_SIM_INT		(NR_IRQS_LEGACY + 15)
-#define MX1_SIM_DATA_INT	(NR_IRQS_LEGACY + 16)
-#define MX1_RTC_INT		(NR_IRQS_LEGACY + 17)
-#define MX1_RTC_SAMINT		(NR_IRQS_LEGACY + 18)
-#define MX1_INT_UART2PFERR	(NR_IRQS_LEGACY + 19)
-#define MX1_INT_UART2RTS	(NR_IRQS_LEGACY + 20)
-#define MX1_INT_UART2DTR	(NR_IRQS_LEGACY + 21)
-#define MX1_INT_UART2UARTC	(NR_IRQS_LEGACY + 22)
-#define MX1_INT_UART2TX		(NR_IRQS_LEGACY + 23)
-#define MX1_INT_UART2RX		(NR_IRQS_LEGACY + 24)
-#define MX1_INT_UART1PFERR	(NR_IRQS_LEGACY + 25)
-#define MX1_INT_UART1RTS	(NR_IRQS_LEGACY + 26)
-#define MX1_INT_UART1DTR	(NR_IRQS_LEGACY + 27)
-#define MX1_INT_UART1UARTC	(NR_IRQS_LEGACY + 28)
-#define MX1_INT_UART1TX		(NR_IRQS_LEGACY + 29)
-#define MX1_INT_UART1RX		(NR_IRQS_LEGACY + 30)
-#define MX1_VOICE_DAC_INT	(NR_IRQS_LEGACY + 31)
-#define MX1_VOICE_ADC_INT	(NR_IRQS_LEGACY + 32)
-#define MX1_PEN_DATA_INT	(NR_IRQS_LEGACY + 33)
-#define MX1_PWM_INT		(NR_IRQS_LEGACY + 34)
-#define MX1_SDHC_INT		(NR_IRQS_LEGACY + 35)
-#define MX1_INT_I2C		(NR_IRQS_LEGACY + 39)
-#define MX1_INT_CSPI2		(NR_IRQS_LEGACY + 40)
-#define MX1_INT_CSPI1		(NR_IRQS_LEGACY + 41)
-#define MX1_SSI_TX_INT		(NR_IRQS_LEGACY + 42)
-#define MX1_SSI_TX_ERR_INT	(NR_IRQS_LEGACY + 43)
-#define MX1_SSI_RX_INT		(NR_IRQS_LEGACY + 44)
-#define MX1_SSI_RX_ERR_INT	(NR_IRQS_LEGACY + 45)
-#define MX1_TOUCH_INT		(NR_IRQS_LEGACY + 46)
-#define MX1_INT_USBD0		(NR_IRQS_LEGACY + 47)
-#define MX1_INT_USBD1		(NR_IRQS_LEGACY + 48)
-#define MX1_INT_USBD2		(NR_IRQS_LEGACY + 49)
-#define MX1_INT_USBD3		(NR_IRQS_LEGACY + 50)
-#define MX1_INT_USBD4		(NR_IRQS_LEGACY + 51)
-#define MX1_INT_USBD5		(NR_IRQS_LEGACY + 52)
-#define MX1_INT_USBD6		(NR_IRQS_LEGACY + 53)
-#define MX1_BTSYS_INT		(NR_IRQS_LEGACY + 55)
-#define MX1_BTTIM_INT		(NR_IRQS_LEGACY + 56)
-#define MX1_BTWUI_INT		(NR_IRQS_LEGACY + 57)
-#define MX1_TIM2_INT		(NR_IRQS_LEGACY + 58)
-#define MX1_TIM1_INT		(NR_IRQS_LEGACY + 59)
-#define MX1_DMA_ERR		(NR_IRQS_LEGACY + 60)
-#define MX1_DMA_INT		(NR_IRQS_LEGACY + 61)
-#define MX1_GPIO_INT_PORTD	(NR_IRQS_LEGACY + 62)
-#define MX1_WDT_INT		(NR_IRQS_LEGACY + 63)
-
-/* DMA */
-#define MX1_DMA_REQ_UART3_T		2
-#define MX1_DMA_REQ_UART3_R		3
-#define MX1_DMA_REQ_SSI2_T		4
-#define MX1_DMA_REQ_SSI2_R		5
-#define MX1_DMA_REQ_CSI_STAT		6
-#define MX1_DMA_REQ_CSI_R		7
-#define MX1_DMA_REQ_MSHC		8
-#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
-#define MX1_DMA_REQ_DSPA_DCT_DIN	10
-#define MX1_DMA_REQ_DSPA_MAC		11
-#define MX1_DMA_REQ_EXT			12
-#define MX1_DMA_REQ_SDHC		13
-#define MX1_DMA_REQ_SPI1_R		14
-#define MX1_DMA_REQ_SPI1_T		15
-#define MX1_DMA_REQ_SSI_T		16
-#define MX1_DMA_REQ_SSI_R		17
-#define MX1_DMA_REQ_ASP_DAC		18
-#define MX1_DMA_REQ_ASP_ADC		19
-#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
-#define MX1_DMA_REQ_SPI2_R		26
-#define MX1_DMA_REQ_SPI2_T		27
-#define MX1_DMA_REQ_UART2_T		28
-#define MX1_DMA_REQ_UART2_R		29
-#define MX1_DMA_REQ_UART1_T		30
-#define MX1_DMA_REQ_UART1_R		31
-
-/*
- * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
- * to not break drivers/usb/gadget/imx_udc.  Should go
- * away after this driver uses the new name.
- */
-#define USBD_INT0		MX1_INT_USBD0
-
-#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 599f973e10d8..cefe44f6889b 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -21,7 +21,6 @@ if ARCH_INTEGRATOR
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select INTEGRATOR_AP_TIMER
-	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 8ff61be1a29f..24bd64dabdfc 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,8 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0b7fe74ff46d..e4f21086b42b 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -268,80 +268,6 @@ static void __init apx4devkit_init(void)
 					   apx4devkit_phy_fixup);
 }
 
-#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
-#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
-#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
-#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
-#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
-#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
-#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
-#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
-#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
-
-static const struct gpio const tx28_gpios[] __initconst = {
-	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
-	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
-	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
-	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
-	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
-	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
-	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
-	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
-	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
-	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
-	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
-};
-
-static void __init tx28_post_init(void)
-{
-	struct device_node *np;
-	struct platform_device *pdev;
-	struct pinctrl *pctl;
-	int ret;
-
-	enable_clk_enet_out();
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
-	pdev = of_find_device_by_node(np);
-	if (!pdev) {
-		pr_err("%s: failed to find fec device\n", __func__);
-		return;
-	}
-
-	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
-	if (IS_ERR(pctl)) {
-		pr_err("%s: failed to get pinctrl state\n", __func__);
-		return;
-	}
-
-	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
-	if (ret) {
-		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
-		return;
-	}
-
-	/* Power up fec phy */
-	gpio_set_value(TX28_FEC_PHY_POWER, 1);
-	msleep(26); /* 25ms according to data sheet */
-
-	/* Mode strap pins */
-	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
-	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
-	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	/* Deasserting FEC PHY RESET */
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	pinctrl_put(pctl);
-}
-
 static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
@@ -501,9 +427,6 @@ static void __init mxs_machine_init(void)
 	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
-
-	if (of_machine_is_compatible("karo,tx28"))
-		tx28_post_init();
 }
 
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 7119ef28e0ad..357be2debc9d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,7 +19,7 @@
 #include "board-h2.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cd146ed0538d..675254ee4b1e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -349,7 +349,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 43aab63cbc39..4f58bfa5e754 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -20,7 +20,7 @@
 #include "board-h3.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f7c8c63dd532..e62f9d454f10 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -368,7 +368,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 9525ef9bc6c0..e424df901dbd 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -401,7 +401,7 @@ static struct platform_device lcd_device = {
 };
 
 /* MMC Card */
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 static struct omap_mmc_platform_data htc_mmc1_data = {
 	.nr_slots                       = 1,
 	.switch_slot                    = NULL,
@@ -586,7 +586,7 @@ static void __init htcherald_init(void)
 
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 	htc_mmc_data[0] = &htc_mmc1_data;
 	omap1_init_mmc(htc_mmc_data, 1);
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index ae90bd02b3bf..67e188271643 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -315,7 +315,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
@@ -328,7 +328,7 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
 };
 #endif
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index dd3a3ad797ea..ee8d9f553db4 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -159,7 +159,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.extcon		= "tahvo-usb",
 };
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 #define NOKIA770_GPIO_MMC_POWER		41
 #define NOKIA770_GPIO_MMC_SWITCH	23
@@ -216,7 +216,7 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
 static struct i2c_cbus_platform_data nokia770_cbus_data = {
 	.clk_gpio = OMAP_MPUIO(9),
 	.dat_gpio = OMAP_MPUIO(10),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index a9373570bbb1..79f0af8bfae0 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -20,7 +20,7 @@
 
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 8c8be861fff2..baaf902b7016 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -33,7 +33,7 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
 
 #define	OMAP_RTC_BASE		0xfffb4800
 
@@ -72,7 +72,7 @@ static inline void omap_init_mbox(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
@@ -230,7 +230,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 /*-------------------------------------------------------------------------*/
 
 /* OMAP7xx SPI support */
-#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
 
 struct platform_device omap_spi1 = {
 	.name           = "omap1_spi100k",
@@ -312,7 +312,7 @@ static inline void omap_init_sti(void) {}
  * mcbsp1..3	= 5..7
  */
 
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
 
 #define	OMAP_UWIRE_BASE		0xfffb3000
 
@@ -418,7 +418,7 @@ static int __init omap1_init_devices(void)
 }
 arch_initcall(omap1_init_devices);
 
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
 
 static struct resource wdt_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index c770d45c7226..ddab04087b7a 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -33,7 +33,7 @@
 
 #include <asm/mach/map.h>
 
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 2c263051dc51..a7c5559caef2 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -12,7 +12,7 @@
 
 void omap_otg_init(struct omap_usb_config *config);
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+#if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
index 39c2b13de884..d7b46880e4ca 100644
--- a/arch/arm/mach-omap1/mmc.h
+++ b/arch/arm/mach-omap1/mmc.h
@@ -7,7 +7,7 @@
 #define OMAP1_MMC1_BASE		0xfffb7800
 #define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 #else
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 4118db50d5e8..2506e598a067 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -136,7 +136,7 @@ omap_otg_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->otg || config->register_host) {
 		struct platform_device *ohci_device = config->ohci_device;
 		int status;
@@ -221,7 +221,7 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
@@ -612,7 +612,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->register_host) {
 		int status;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5a0b380a8166..a9afeebd59f2 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -192,12 +192,6 @@ config MACH_OMAP2_TUSB6010
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP_LDP
-	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -222,12 +216,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config MACH_NOKIA_RX51
-	bool "Nokia N900 (RX-51) phone"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a7f2d051f524..5b37ec29996e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -231,11 +231,7 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70b21cc279ba..2188dc30e232 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -81,8 +81,7 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 		pr_err("Unable to register NOR device\n");
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
@@ -97,10 +96,9 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 
 /* Note that all values in this struct are in nanoseconds */
 struct gpmc_timings nand_default_timings[1] = {
@@ -144,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
 
 /**
  * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index ea9aaebe11e7..8b39eec07318 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -23,10 +23,7 @@ struct flash_partitions {
 	int nr_parts;
 };
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
 #else
@@ -36,8 +33,7 @@ static inline void board_flash_init(struct flash_partitions part[],
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
 extern struct gpmc_timings nand_default_timings[];
@@ -49,8 +45,7 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 #define	nand_default_timings	NULL
 #endif
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_onenand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs);
 #else
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
deleted file mode 100644
index 390795b334c3..000000000000
--- a/arch/arm/mach-omap2/board-ldp.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-ldp.c
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- * Nishant Kamat <nskamat@ti.com>
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "display.h"
-
-#define LDP_SMSC911X_CS		1
-#define LDP_SMSC911X_GPIO	152
-#define DEBUG_BASE		0x08000000
-#define LDP_ETHR_START		DEBUG_BASE
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data ldp_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
-	[0] = {
-		.code			= KEY_ENTER,
-		.gpio			= 101,
-		.desc			= "enter sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[1] = {
-		.code			= KEY_F1,
-		.gpio			= 102,
-		.desc			= "func 1",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[2] = {
-		.code			= KEY_F2,
-		.gpio			= 103,
-		.desc			= "func 2",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[3] = {
-		.code			= KEY_F3,
-		.gpio			= 104,
-		.desc			= "func 3",
-		.active_low		= 1,
-		.debounce_interval 	= 30,
-	},
-	[4] = {
-		.code			= KEY_F4,
-		.gpio			= 105,
-		.desc			= "func 4",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[5] = {
-		.code			= KEY_LEFT,
-		.gpio			= 106,
-		.desc			= "left sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[6] = {
-		.code			= KEY_RIGHT,
-		.gpio			= 107,
-		.desc			= "right sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[7] = {
-		.code			= KEY_UP,
-		.gpio			= 108,
-		.desc			= "up sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[8] = {
-		.code			= KEY_DOWN,
-		.gpio			= 109,
-		.desc			= "down sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-};
-
-static struct gpio_keys_platform_data ldp_gpio_keys = {
-	.buttons		= ldp_gpio_keys_buttons,
-	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
-	.rep			= 1,
-};
-
-static struct platform_device ldp_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ldp_gpio_keys,
-	},
-};
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = LDP_SMSC911X_CS,
-	.gpio_irq       = LDP_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init ldp_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-/* LCD */
-
-#define LCD_PANEL_RESET_GPIO		55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static const struct display_timing ldp_lcd_videomode = {
-	.pixelclock	= { 0, 5400000, 0 },
-
-	.hactive = { 0, 240, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 39, 0 },
-	.hsync_len = { 0, 3, 0 },
-
-	.vactive = { 0, 320, 0 },
-	.vfront_porch = { 0, 2, 0 },
-	.vback_porch = { 0, 7, 0 },
-	.vsync_len = { 0, 1, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data ldp_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.display_timing		= &ldp_lcd_videomode,
-
-	.enable_gpio		= -1,	/* filled in code */
-	.backlight_gpio		= -1,	/* filled in code */
-};
-
-static struct platform_device ldp_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &ldp_lcd_pdata,
-};
-
-static struct omap_dss_board_info ldp_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init ldp_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&ldp_dss_data);
-}
-
-static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
-{
-	int res;
-
-	/* LCD enable GPIO */
-	ldp_lcd_pdata.enable_gpio = gpio + 7;
-
-	/* Backlight enable GPIO */
-	ldp_lcd_pdata.backlight_gpio = gpio + 15;
-
-	res = platform_device_register(&ldp_lcd_device);
-	if (res)
-		pr_err("Unable to register LCD: %d\n", res);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.setup		= ldp_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= ldp_vmmc1_supply,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VAUX1 */
-static struct regulator_init_data ldp_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
-	.consumer_supplies		= ldp_vaux1_supplies,
-};
-
-static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data ldp_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
-	.consumer_supplies	= ldp_vpll2_supplies,
-};
-
-static struct twl4030_platform_data ldp_twldata = {
-	/* platform_data for children goes here */
-	.vmmc1		= &ldp_vmmc1,
-	.vaux1		= &ldp_vaux1,
-	.vpll2		= &ldp_vpll2,
-	.gpio		= &ldp_gpio_data,
-	.keypad		= &ldp_kp_twl4030_data,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&ldp_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
-	omap3_pmic_init("twl4030", &ldp_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_gpio_keys_device,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition ldp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "File System - NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
-	},
-
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap_ldp_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	ldp_init_smsc911x();
-	omap_i2c_init();
-	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_ads7846_init(1, 54, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			0, 0, nand_default_timings);
-
-	omap_hsmmc_init(mmc);
-	ldp_display_init();
-}
-
-MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap_ldp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index b6443a4e0c78..6b6fda65fb3b 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -66,7 +66,7 @@ static void board_check_revision(void)
 		pr_err("Unknown board\n");
 }
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -163,8 +163,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
 	},
 };
 
-#if defined(CONFIG_MENELAUS) &&						\
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
  * On both N800 and N810, only the first of the two MMC controllers is in use.
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
deleted file mode 100644
index 6d3af43ae3e4..000000000000
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ /dev/null
@@ -1,1313 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
- *
- * Copyright (C) 2008-2009 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/wl12xx.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mmc/host.h>
-#include <linux/power/isp1704_charger.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/module.h>
-
-#include <plat/dmtimer.h>
-
-#include <asm/system_info.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-
-#include "board-rx51.h"
-
-#include <sound/tlv320aic3x.h>
-#include <sound/tpa6130a2-plat.h>
-#include <linux/platform_data/media/si4713.h>
-#include <linux/platform_data/leds-lp55xx.h>
-
-#include <linux/platform_data/tsl2563.h>
-#include <linux/lis3lv02d.h>
-
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/pwm_omap_dmtimer.h>
-#include <linux/platform_data/media/ir-rx51.h>
-
-#include "mux.h"
-#include "omap-pm.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "soc.h"
-#include "omap-secure.h"
-
-#define SYSTEM_REV_B_USES_VAUX3	0x1699
-#define SYSTEM_REV_S_USES_VAUX3 0x8
-
-#define RX51_WL1251_POWER_GPIO		87
-#define RX51_WL1251_IRQ_GPIO		42
-#define RX51_FMTX_RESET_GPIO		163
-#define RX51_FMTX_IRQ			53
-#define RX51_LP5523_CHIP_EN_GPIO	41
-
-#define RX51_USB_TRANSCEIVER_RST_GPIO	67
-
-#define RX51_TSC2005_RESET_GPIO         104
-#define RX51_TSC2005_IRQ_GPIO           100
-
-#define LIS302_IRQ1_GPIO 181
-#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
-
-/* List all SPI devices here. Note that the list/probe order seems to matter! */
-enum {
-	RX51_SPI_WL1251,
-	RX51_SPI_TSC2005,	/* Touch Controller */
-	RX51_SPI_MIPID,		/* LCD panel */
-};
-
-static struct wl1251_platform_data wl1251_pdata;
-static struct tsc2005_platform_data tsc2005_pdata;
-
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-static int lis302_setup(void)
-{
-	int err;
-	int irq1 = LIS302_IRQ1_GPIO;
-	int irq2 = LIS302_IRQ2_GPIO;
-
-	/* gpio for interrupt pin 1 */
-	err = gpio_request(irq1, "lis3lv02dl_irq1");
-	if (err) {
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	/* gpio for interrupt pin 2 */
-	err = gpio_request(irq2, "lis3lv02dl_irq2");
-	if (err) {
-		gpio_free(irq1);
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	gpio_direction_input(irq1);
-	gpio_direction_input(irq2);
-
-out:
-	return err;
-}
-
-static int lis302_release(void)
-{
-	gpio_free(LIS302_IRQ1_GPIO);
-	gpio_free(LIS302_IRQ2_GPIO);
-
-	return 0;
-}
-
-static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
-	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	/* Limits are 0.5g * value */
-	.click_thresh_x = 8,
-	.click_thresh_y = 8,
-	.click_thresh_z = 10,
-	/* Click must be longer than time limit */
-	.click_time_limit = 9,
-	/* Kind of debounce filter */
-	.click_latency    = 50,
-
-	/* Limits for all axis. millig-value / 18 to get HW values */
-	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
-	.wakeup_thresh = 800 / 18,
-	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
-	.wakeup_thresh2 = 900 / 18,
-
-	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
-
-	/* Interrupt line 2 for click detection, line 1 for thresholds */
-	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
-
-	.axis_x = LIS3_DEV_X,
-	.axis_y = LIS3_INV_DEV_Y,
-	.axis_z = LIS3_INV_DEV_Z,
-	.setup_resources = lis302_setup,
-	.release_resources = lis302_release,
-	.st_min_limits = {-32, 3, 3},
-	.st_max_limits = {-3, 32, 32},
-};
-#endif
-
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
-	.cover_comp_gain = 16,
-};
-#endif
-
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-static struct lp55xx_led_config rx51_lp5523_led_config[] = {
-	{
-		.name		= "lp5523:kb1",
-		.chan_nr	= 0,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb2",
-		.chan_nr	= 1,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb3",
-		.chan_nr	= 2,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb4",
-		.chan_nr	= 3,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:b",
-		.chan_nr	= 4,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:g",
-		.chan_nr	= 5,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:r",
-		.chan_nr	= 6,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb5",
-		.chan_nr	= 7,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb6",
-		.chan_nr	= 8,
-		.led_current	= 50,
-		.max_current	= 100,
-	}
-};
-
-static struct lp55xx_platform_data rx51_lp5523_platform_data = {
-	.led_config		= rx51_lp5523_led_config,
-	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
-	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
-};
-#endif
-
-#define RX51_LCD_RESET_GPIO	90
-
-static struct panel_acx565akm_platform_data acx_pdata = {
-	.name		= "lcd",
-	.source		= "sdi.0",
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
-	.datapairs	= 2,
-};
-
-static struct omap2_mcspi_device_config wl1251_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config mipid_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
-	[RX51_SPI_WL1251] = {
-		.modalias		= "wl1251",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz   	= 48000000,
-		.mode                   = SPI_MODE_3,
-		.controller_data	= &wl1251_mcspi_config,
-		.platform_data		= &wl1251_pdata,
-	},
-	[RX51_SPI_MIPID] = {
-		.modalias		= "acx565akm",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &mipid_mcspi_config,
-		.platform_data		= &acx_pdata,
-	},
-	[RX51_SPI_TSC2005] = {
-		.modalias		= "tsc2005",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &tsc2005_mcspi_config,
-		.platform_data		= &tsc2005_pdata,
-	},
-};
-
-static struct platform_device rx51_battery_device = {
-	.name	= "rx51-battery",
-	.id	= -1,
-};
-
-static void rx51_charger_set_power(bool on)
-{
-	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
-}
-
-static struct isp1704_charger_data rx51_charger_data = {
-	.set_power	= rx51_charger_set_power,
-};
-
-static struct platform_device rx51_charger_device = {
-	.name	= "isp1704_charger",
-	.dev	= {
-		.platform_data = &rx51_charger_data,
-	},
-};
-
-static void __init rx51_charger_init(void)
-{
-	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
-
-	platform_device_register(&rx51_battery_device);
-	platform_device_register(&rx51_charger_device);
-}
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-
-#define RX51_GPIO_CAMERA_LENS_COVER	110
-#define RX51_GPIO_CAMERA_FOCUS		68
-#define RX51_GPIO_CAMERA_CAPTURE	69
-#define RX51_GPIO_KEYPAD_SLIDE		71
-#define RX51_GPIO_LOCK_BUTTON		113
-#define RX51_GPIO_PROXIMITY		89
-
-#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
-
-static struct gpio_keys_button rx51_gpio_keys[] = {
-	{
-		.desc			= "Camera Lens Cover",
-		.type			= EV_SW,
-		.code			= SW_CAMERA_LENS_COVER,
-		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Focus",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA_FOCUS,
-		.gpio			= RX51_GPIO_CAMERA_FOCUS,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Capture",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA,
-		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Lock Button",
-		.type			= EV_KEY,
-		.code			= KEY_SCREENLOCK,
-		.gpio			= RX51_GPIO_LOCK_BUTTON,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Keypad Slide",
-		.type			= EV_SW,
-		.code			= SW_KEYPAD_SLIDE,
-		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= RX51_GPIO_PROXIMITY,
-		.active_low		= 0,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}
-};
-
-static struct gpio_keys_platform_data rx51_gpio_keys_data = {
-	.buttons	= rx51_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
-};
-
-static struct platform_device rx51_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &rx51_gpio_keys_data,
-	},
-};
-
-static void __init rx51_add_gpio_keys(void)
-{
-	platform_device_register(&rx51_gpio_keys_device);
-}
-#else
-static void __init rx51_add_gpio_keys(void)
-{
-}
-#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
-
-static uint32_t board_keymap[] = {
-	/*
-	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
-	 * connected to the ground" matrix state.
-	 */
-	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_O),
-	KEY(0, 2, KEY_P),
-	KEY(0, 3, KEY_COMMA),
-	KEY(0, 4, KEY_BACKSPACE),
-	KEY(0, 6, KEY_A),
-	KEY(0, 7, KEY_S),
-
-	KEY(1, 0, KEY_W),
-	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_F),
-	KEY(1, 3, KEY_G),
-	KEY(1, 4, KEY_H),
-	KEY(1, 5, KEY_J),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_L),
-
-	KEY(2, 0, KEY_E),
-	KEY(2, 1, KEY_DOT),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(2, 5, KEY_Z),
-	KEY(2, 6, KEY_X),
-	KEY(2, 7, KEY_C),
-	KEY(2, 8, KEY_F9),
-
-	KEY(3, 0, KEY_R),
-	KEY(3, 1, KEY_V),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_N),
-	KEY(3, 4, KEY_M),
-	KEY(3, 5, KEY_SPACE),
-	KEY(3, 6, KEY_SPACE),
-	KEY(3, 7, KEY_LEFT),
-
-	KEY(4, 0, KEY_T),
-	KEY(4, 1, KEY_DOWN),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(4, 5, KEY_RIGHTALT),
-	KEY(4, 6, KEY_LEFTSHIFT),
-	KEY(4, 8, KEY_F10),
-
-	KEY(5, 0, KEY_Y),
-	KEY(5, 8, KEY_F11),
-
-	KEY(6, 0, KEY_U),
-
-	KEY(7, 0, KEY_I),
-	KEY(7, 1, KEY_F7),
-	KEY(7, 2, KEY_F8),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data rx51_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-/* Enable input logic and pull all lines up when eMMC is on. */
-static struct omap_board_mux rx51_mmc2_on_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/* Disable input logic and pull all lines down when eMMC is off. */
-static struct omap_board_mux rx51_mmc2_off_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_mux_partition *partition;
-
-/*
- * Current flows to eMMC when eMMC is off and the data lines are pulled up,
- * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
- */
-static void rx51_mmc2_remux(struct device *dev, int power_on)
-{
-	if (power_on)
-		omap_mux_write_array(partition, rx51_mmc2_on_mux);
-	else
-		omap_mux_write_array(partition, rx51_mmc2_off_mux);
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.cover_only	= true,
-		.gpio_cd	= 160,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-						/* See also rx51_mmc2_remux */
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.remux		= rx51_mmc2_remux,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply rx51_vaux2_supply[] = {
-	REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
-};
-
-static struct regulator_consumer_supply rx51_vaux3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
-	/* tlv320aic3x analog supplies */
-	REGULATOR_SUPPLY("AVDD", "2-0018"),
-	REGULATOR_SUPPLY("DRVDD", "2-0018"),
-	REGULATOR_SUPPLY("AVDD", "2-0019"),
-	REGULATOR_SUPPLY("DRVDD", "2-0019"),
-	/* tpa6130a2 */
-	REGULATOR_SUPPLY("Vdd", "2-0060"),
-	/* Keep vmmc as last item. It is not iterated for newer boards */
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vio_supplies[] = {
-	/* tlv320aic3x digital supplies */
-	REGULATOR_SUPPLY("IOVDD", "2-0018"),
-	REGULATOR_SUPPLY("DVDD", "2-0018"),
-	REGULATOR_SUPPLY("IOVDD", "2-0019"),
-	REGULATOR_SUPPLY("DVDD", "2-0019"),
-	/* Si4713 IO supply */
-	REGULATOR_SUPPLY("vio", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd_IO", "3-001d"),
-};
-
-static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"),
-	/* Si4713 supply */
-	REGULATOR_SUPPLY("vdd", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd", "3-001d"),
-};
-
-static struct regulator_init_data rx51_vaux1 = {
-	.constraints = {
-		.name			= "V28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.always_on		= true, /* due battery cover sensor */
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
-	.consumer_supplies	= rx51_vaux1_consumers,
-};
-
-static struct regulator_init_data rx51_vaux2 = {
-	.constraints = {
-		.name			= "VCSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux2_supply),
-	.consumer_supplies	= rx51_vaux2_supply,
-};
-
-/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3_cam = {
-	.constraints = {
-		.name			= "VCAM_DIG_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vaux3_mmc = {
-	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
-	.consumer_supplies	= rx51_vaux3_supply,
-};
-
-static struct regulator_init_data rx51_vaux4 = {
-	.constraints = {
-		.name			= "VCAM_ANA_28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
-	.consumer_supplies	= rx51_vmmc1_supply,
-};
-
-static struct regulator_init_data rx51_vmmc2 = {
-	.constraints = {
-		.name			= "V28_A",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.always_on		= true, /* due VIO leak to AIC34 VDDs */
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
-	.consumer_supplies	= rx51_vmmc2_supplies,
-};
-
-static struct regulator_init_data rx51_vpll1 = {
-	.constraints = {
-		.name			= "VPLL",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vpll2 = {
-	.constraints = {
-		.name			= "VSDI_CSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vsim = {
-	.constraints = {
-		.name			= "VMMC2_IO_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
-	.consumer_supplies	= rx51_vsim_supply,
-};
-
-static struct regulator_init_data rx51_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
-	.consumer_supplies	= rx51_vio_supplies,
-};
-
-static struct regulator_init_data rx51_vintana1 = {
-	.constraints = {
-		.name			= "VINTANA1",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintana2 = {
-	.constraints = {
-		.name			= "VINTANA2",
-		.min_uV			= 2750000,
-		.max_uV			= 2750000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintdig = {
-	.constraints = {
-		.name			= "VINTDIG",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
-	.dev_id = "2-0063",
-	.table = {
-		GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
-		{ },
-	},
-};
-
-static __init void rx51_gpio_init(void)
-{
-	gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
-}
-
-static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
-{
-	/* FIXME this gpio setup is just a placeholder for now */
-	gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
-				| BIT(4) | BIT(5)
-				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
-				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
-				| BIT(16) | BIT(17) ,
-	.setup			= rx51_twlgpio_setup,
-};
-
-static struct twl4030_ins sleep_on_seq[] __initdata = {
-/*
- * Turn off everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
-};
-
-static struct twl4030_script sleep_on_script __initdata = {
-	.script = sleep_on_seq,
-	.size   = ARRAY_SIZE(sleep_on_seq),
-	.flags  = TWL4030_SLEEP_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_script __initdata = {
-	.script	= wakeup_seq,
-	.size	= ARRAY_SIZE(wakeup_seq),
-	.flags	= TWL4030_WAKEUP12_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_p3_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_p3_script __initdata = {
-	.script	= wakeup_p3_seq,
-	.size	= ARRAY_SIZE(wakeup_p3_seq),
-	.flags	= TWL4030_WAKEUP3_SCRIPT,
-};
-
-static struct twl4030_ins wrst_seq[] __initdata = {
-/*
- * Reset twl4030.
- * Reset VDD1 regulator.
- * Reset VDD2 regulator.
- * Reset VPLL1 regulator.
- * Enable sysclk output.
- * Reenable twl4030.
- */
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
-		0x13},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
-	{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wrst_script __initdata = {
-	.script = wrst_seq,
-	.size   = ARRAY_SIZE(wrst_seq),
-	.flags  = TWL4030_WRST_SCRIPT,
-};
-
-static struct twl4030_script *twl4030_scripts[] __initdata = {
-	/* wakeup12 script should be loaded before sleep script, otherwise a
-	   board might hit retention before loading of wakeup script is
-	   completed. This can cause boot failures depending on timing issues.
-	*/
-	&wakeup_script,
-	&sleep_on_script,
-	&wakeup_p3_script,
-	&wrst_script,
-};
-
-static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
-	{ .resource = RES_VDD1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VDD2, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX3, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX4, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VDAC, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VSIM, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_32KCLKOUT, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_RESET, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_MAIN_REF, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ 0, 0},
-};
-
-static struct twl4030_power_data rx51_t2scripts_data __initdata = {
-	.scripts        = twl4030_scripts,
-	.num = ARRAY_SIZE(twl4030_scripts),
-	.resource_config = twl4030_rconfig,
-};
-
-static struct twl4030_vibra_data rx51_vibra_data __initdata = {
-	.coexist	= 0,
-};
-
-static struct twl4030_audio_data rx51_audio_data __initdata = {
-	.audio_mclk	= 26000000,
-	.vibra		= &rx51_vibra_data,
-};
-
-static struct twl4030_platform_data rx51_twldata __initdata = {
-	/* platform_data for children goes here */
-	.gpio			= &rx51_gpio_data,
-	.keypad			= &rx51_kp_data,
-	.power			= &rx51_t2scripts_data,
-	.audio			= &rx51_audio_data,
-
-	.vaux1			= &rx51_vaux1,
-	.vaux2			= &rx51_vaux2,
-	.vaux4			= &rx51_vaux4,
-	.vmmc1			= &rx51_vmmc1,
-	.vpll1			= &rx51_vpll1,
-	.vpll2			= &rx51_vpll2,
-	.vsim			= &rx51_vsim,
-	.vintana1		= &rx51_vintana1,
-	.vintana2		= &rx51_vintana2,
-	.vintdig		= &rx51_vintdig,
-	.vio			= &rx51_vio,
-};
-
-static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.power_gpio		= 98,
-};
-
-/* Audio setup data */
-static struct aic3x_setup_data rx51_aic34_setup = {
-	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
-	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
-};
-
-static struct aic3x_pdata rx51_aic3x_data = {
-	.setup = &rx51_aic34_setup,
-	.gpio_reset = 60,
-};
-
-static struct aic3x_pdata rx51_aic3x_data2 = {
-	.gpio_reset = 60,
-};
-
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-static struct si4713_platform_data rx51_si4713_platform_data = {
-	.is_platform_device = true
-};
-#endif
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	{
-		I2C_BOARD_INFO("si4713", 0x63),
-		.platform_data = &rx51_si4713_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-		.platform_data = &rx51_aic3x_data,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x19),
-		.platform_data = &rx51_aic3x_data2,
-	},
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-	{
-		I2C_BOARD_INFO("tsl2563", 0x29),
-		.platform_data = &rx51_tsl2563_platform_data,
-	},
-#endif
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-	{
-		I2C_BOARD_INFO("lp5523", 0x32),
-		.platform_data  = &rx51_lp5523_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("bq27200", 0x55),
-	},
-	{
-		I2C_BOARD_INFO("tpa6130a2", 0x60),
-		.platform_data = &rx51_tpa6130a2_data,
-	}
-};
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	{
-		I2C_BOARD_INFO("lis3lv02d", 0x1d),
-		.platform_data = &rx51_lis3lv02d_data,
-	},
-#endif
-};
-
-static int __init rx51_i2c_init(void)
-{
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	int err;
-#endif
-
-	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
-		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-		/* Only older boards use VMMC2 for internal MMC */
-		rx51_vmmc2.num_consumer_supplies--;
-	} else {
-		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-	}
-	rx51_twldata.vmmc2 = &rx51_vmmc2;
-	omap3_pmic_get_config(&rx51_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
-			TWL_COMMON_REGULATOR_VDAC);
-
-	rx51_twldata.vdac->constraints.apply_uV = true;
-	rx51_twldata.vdac->constraints.name = "VDAC";
-
-	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
-	if (err) {
-		printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
-		return err;
-	}
-	rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
-#endif
-	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
-	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
-#endif
-	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
-	return 0;
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-static struct mtd_partition onenand_partitions[] = {
-	{
-		.name           = "bootloader",
-		.offset         = 0,
-		.size           = 0x20000,
-		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
-	},
-	{
-		.name           = "config",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x60000,
-	},
-	{
-		.name           = "log",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x40000,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "initfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.cs		= 0,
-		.gpio_irq	= 65,
-		.parts		= onenand_partitions,
-		.nr_parts	= ARRAY_SIZE(onenand_partitions),
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-static struct gpio rx51_wl1251_gpios[] __initdata = {
-	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
-};
-
-static void __init rx51_init_wl1251(void)
-{
-	int irq, ret;
-
-	ret = gpio_request_array(rx51_wl1251_gpios,
-				 ARRAY_SIZE(rx51_wl1251_gpios));
-	if (ret < 0)
-		goto error;
-
-	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
-	if (irq < 0)
-		goto err_irq;
-
-	wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
-	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
-
-	return;
-
-err_irq:
-	gpio_free(RX51_WL1251_IRQ_GPIO);
-error:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-	wl1251_pdata.power_gpio = -1;
-
-	/*
-	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
-	 * set_power is null, and wl1251_probe() will fail.
-	 */
-}
-
-static struct tsc2005_platform_data tsc2005_pdata = {
-	.ts_pressure_max	= 2048,
-	.ts_pressure_fudge	= 2,
-	.ts_x_max		= 4096,
-	.ts_x_fudge		= 4,
-	.ts_y_max		= 4096,
-	.ts_y_fudge		= 7,
-	.ts_x_plate_ohm		= 280,
-	.esd_timeout_ms		= 8000,
-};
-
-static struct gpio rx51_tsc2005_gpios[] __initdata = {
-	{ RX51_TSC2005_IRQ_GPIO,   GPIOF_IN,		"tsc2005 IRQ"	},
-	{ RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,	"tsc2005 reset"	},
-};
-
-static void rx51_tsc2005_set_reset(bool enable)
-{
-	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-}
-
-static void __init rx51_init_tsc2005(void)
-{
-	int r;
-
-	omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_array(rx51_tsc2005_gpios,
-			       ARRAY_SIZE(rx51_tsc2005_gpios));
-	if (r < 0) {
-		printk(KERN_ERR "tsc2005 board initialization failed\n");
-		tsc2005_pdata.esd_timeout_ms = 0;
-		return;
-	}
-
-	tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
-	rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
-				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
-}
-
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
-	.request_by_node = omap_dm_timer_request_by_node,
-	.request_specific = omap_dm_timer_request_specific,
-	.request = omap_dm_timer_request,
-	.set_source = omap_dm_timer_set_source,
-	.get_irq = omap_dm_timer_get_irq,
-	.set_int_enable = omap_dm_timer_set_int_enable,
-	.set_int_disable = omap_dm_timer_set_int_disable,
-	.free = omap_dm_timer_free,
-	.enable = omap_dm_timer_enable,
-	.disable = omap_dm_timer_disable,
-	.get_fclk = omap_dm_timer_get_fclk,
-	.start = omap_dm_timer_start,
-	.stop = omap_dm_timer_stop,
-	.set_load = omap_dm_timer_set_load,
-	.set_match = omap_dm_timer_set_match,
-	.set_pwm = omap_dm_timer_set_pwm,
-	.set_prescaler = omap_dm_timer_set_prescaler,
-	.read_counter = omap_dm_timer_read_counter,
-	.write_counter = omap_dm_timer_write_counter,
-	.read_status = omap_dm_timer_read_status,
-	.write_status = omap_dm_timer_write_status,
-};
-#endif
-
-#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-static struct lirc_rx51_platform_data rx51_lirc_data = {
-	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
-};
-
-static struct platform_device rx51_lirc_device = {
-	.name           = "lirc_rx51",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &rx51_lirc_data,
-	},
-};
-
-static void __init rx51_init_lirc(void)
-{
-	platform_device_register(&rx51_lirc_device);
-}
-#else
-static void __init rx51_init_lirc(void)
-{
-}
-#endif
-
-static struct platform_device madc_hwmon = {
-	.name	= "twl4030_madc_hwmon",
-	.id	= -1,
-};
-
-static void __init rx51_init_twl4030_hwmon(void)
-{
-	platform_device_register(&madc_hwmon);
-}
-
-static struct platform_device omap3_rom_rng_device = {
-	.name		= "omap3-rom-rng",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= rx51_secure_rng_call,
-	},
-};
-
-static void __init rx51_init_omap3_rom_rng(void)
-{
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
-		platform_device_register(&omap3_rom_rng_device);
-	}
-}
-
-void __init rx51_peripherals_init(void)
-{
-	rx51_gpio_init();
-	rx51_i2c_init();
-	regulator_has_full_constraints();
-	gpmc_onenand_init(board_onenand_data);
-	rx51_add_gpio_keys();
-	rx51_init_wl1251();
-	rx51_init_tsc2005();
-	rx51_init_lirc();
-	spi_register_board_info(rx51_peripherals_spi_board_info,
-				ARRAY_SIZE(rx51_peripherals_spi_board_info));
-
-	partition = omap_mux_get("core");
-	if (partition)
-		omap_hsmmc_init(mmc);
-
-	rx51_charger_init();
-	rx51_init_twl4030_hwmon();
-	rx51_init_omap3_rom_rng();
-}
-
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
deleted file mode 100644
index 180c6aa633bd..000000000000
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-video.c
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/mm.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "soc.h"
-#include "board-rx51.h"
-#include "display.h"
-
-#include "mux.h"
-
-#define RX51_LCD_RESET_GPIO	90
-
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-
-static struct connector_atv_platform_data rx51_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.invert_polarity = false,
-};
-
-static struct platform_device rx51_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &rx51_tv_pdata,
-};
-
-static struct omap_dss_board_info rx51_dss_board_info = {
-	.default_display_name = "lcd",
-};
-
-static int __init rx51_video_init(void)
-{
-	if (!machine_is_nokia_rx51())
-		return 0;
-
-	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
-		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
-		return 0;
-	}
-
-	omap_display_init(&rx51_dss_board_info);
-
-	platform_device_register(&rx51_tv_connector_device);
-
-	return 0;
-}
-
-omap_subsys_initcall(rx51_video_init);
-#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
deleted file mode 100644
index 41161ca97d74..000000000000
--- a/arch/arm/mach-omap2/board-rx51.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Board support file for Nokia N900 (aka RX-51).
- *
- * Copyright (C) 2007, 2008 Nokia
- * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/musb.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/omap-dma.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "pm.h"
-#include "soc.h"
-#include "sdram-nokia.h"
-#include "omap-secure.h"
-
-#define RX51_GPIO_SLEEP_IND 162
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name	= "sleep_ind",
-		.gpio	= RX51_GPIO_SLEEP_IND,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-/*
- * cpuidle C-states definition for rx51.
- *
- * The 'exit_latency' field is the sum of sleep
- * and wake-up latencies.
-
-    ---------------------------------------------
-   | state |  exit_latency  |  target_residency  |
-    ---------------------------------------------
-   |  C1   |    110 + 162   |            5       |
-   |  C2   |    106 + 180   |          309       |
-   |  C3   |    107 + 410   |        46057       |
-   |  C4   |    121 + 3374  |        46057       |
-   |  C5   |    855 + 1146  |        46057       |
-   |  C6   |   7580 + 4134  |       484329       |
-   |  C7   |   7505 + 15274 |       484329       |
-    ---------------------------------------------
-
-*/
-
-extern void __init rx51_peripherals_init(void);
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 0,
-};
-
-static void __init rx51_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-	rx51_peripherals_init();
-
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-#ifdef CONFIG_ARM_ERRATA_430973
-		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
-		/* set IBE to 1 */
-		rx51_secure_update_aux_cr(BIT(6), 0);
-#endif
-	}
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	platform_device_register(&leds_gpio);
-}
-
-static void __init rx51_reserve(void)
-{
-	omap_reserve();
-}
-
-MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
-	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= rx51_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= rx51_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
deleted file mode 100644
index b76f49e7eed5..000000000000
--- a/arch/arm/mach-omap2/board-rx51.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index d246efd9f734..5388fcd3de72 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -29,8 +29,7 @@
 #include "common.h"
 #include "common-board-devices.h"
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d7f1d69daf6d..60a20f3b44de 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -67,7 +67,7 @@ omap_postcore_initcall(omap3_l3_init);
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP24XX)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -163,9 +163,8 @@ static void __init omap_init_aes(void)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
-	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
 };
 #else
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index facd7406a03d..44fef961bb70 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -28,7 +28,7 @@
 #include "soc.h"
 #include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_DRM_OMAP)
 
 static struct omap_drm_platform_data platform_data;
 
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 1f1ecf8807eb..ecd00b63181e 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -90,7 +90,7 @@ int __init omap_init_vrfb(void)
 int __init omap_init_vrfb(void) { return 0; }
 #endif
 
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
index ea6c9c88c725..99a05b8412fa 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.h
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.h
@@ -21,7 +21,7 @@ struct omap_smsc911x_platform_data {
 	u32	flags;
 };
 
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 
 extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index cff079e563f4..478097741bce 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -26,7 +26,7 @@
 #include "hsmmc.h"
 #include "control.h"
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 148cd9b15499..69b619ddc765 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -28,7 +28,7 @@ struct omap2_hsmmc_info {
 	void (*init_card)(struct mmc_card *card);
 };
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 void omap_hsmmc_init(struct omap2_hsmmc_info *);
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 292eca0e78ed..a72738eab009 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -532,8 +532,7 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 }
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
 #include <linux/platform_data/omap-twl4030.h>
 
 /* Commonly used configuration */
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 70ab4a25a5f8..1d7c83e73ffb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -2,34 +2,29 @@ menuconfig ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CLK_SP810
 	select COMMON_CLK_VERSATILE
 	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config REALVIEW_DT
-	bool "Support RealView(R) Device Tree based boot"
-	select ARM_GIC
-	select CLK_SP810
-	select HAVE_SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
 	select ICST
 	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
-	select SMP_ON_UP if SMP
 	select SOC_REALVIEW
 	select USE_OF
 	help
-	  Include support for booting the ARM(R) RealView(R) evaluation
-	  boards using a device tree machine description.
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
@@ -60,8 +55,6 @@ config REALVIEW_EB_ARM1176
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -71,30 +64,15 @@ config REALVIEW_EB_A9MP
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM11MPCore Revision B tile on the
-	  Realview(R) Emulation Baseboard platform. Since there are device
-	  address differences, a kernel built with this option enabled is
-	  not compatible with other revisions of the ARM11MPCore tile.
-
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -106,7 +84,6 @@ config MACH_REALVIEW_PB11MP
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
@@ -114,20 +91,9 @@ config MACH_REALVIEW_PB1176
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
 
-config REALVIEW_PB1176_SECURE_FLASH
-	bool "Allow access to the secure flash memory block"
-	depends on MACH_REALVIEW_PB1176
-	default n
-	help
-	  Select this option if Linux will only run in secure mode on the
-	  RealView PB1176 platform and access to the secure flash memory
-	  block (64MB @ 0x3c000000) is required.
-
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
 	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
@@ -136,10 +102,6 @@ config MACH_REALVIEW_PBA8
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ZONE_DMA
@@ -147,16 +109,4 @@ config MACH_REALVIEW_PBX
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
 
-config REALVIEW_HIGH_PHYS_OFFSET
-	bool "High physical base address for the RealView platform"
-	depends on MMU && !MACH_REALVIEW_PB1176
-	default y
-	help
-	  RealView boards other than PB1176 have the RAM available at
-	  0x70000000, 256MB of which being mirrored at 0x00000000. If
-	  the board supports 512MB of RAM, this option allows the
-	  memory to be accessed contiguously at the high physical
-	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with HIGHMEM.
-
 endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 404882130956..adf39ad71cc3 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -3,16 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= core.o
-obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-y					+= realview-dt.o
 obj-$(CONFIG_SMP)			+= platsmp-dt.o
-
-ifdef CONFIG_ATAGS
-obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
-obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
-obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h
deleted file mode 100644
index a850ae6945b0..000000000000
--- a/arch/arm/mach-realview/board-eb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include "platform.h"
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
-#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
-
-#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
-#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-#define REALVIEW_EB_PROC_A9MP		0x0C000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#ifdef CONFIG_REALVIEW_EB_A9MP
-#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
-#else
-#define core_tile_a9mp()	0
-#endif
-
-#define machine_is_realview_eb_mp() \
-	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
deleted file mode 100644
index 29c04a9e1344..000000000000
--- a/arch/arm/mach-realview/board-pb1176.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
-#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
- */
-#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
deleted file mode 100644
index b16e6e85e92d..000000000000
--- a/arch/arm/mach-realview/board-pb11mp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
-#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
- /*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
deleted file mode 100644
index 6a1391f50373..000000000000
--- a/arch/arm/mach-realview/board-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PBA8_H
-#define __ASM_ARCH_BOARD_PBA8_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
-#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
-#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
-
-/*
- * PBA8 PCI regions
- */
-#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
deleted file mode 100644
index 5cda480b12bb..000000000000
--- a/arch/arm/mach-realview/board-pbx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_BOARD_PBX_H
-#define __ASM_ARCH_BOARD_PBX_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
-#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
-#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
-#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
-#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_FLASH0_BASE		0x40000000
-#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBX_FLASH1_BASE		0x44000000
-#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-/*
- * Tile-specific addresses
- */
-#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
-#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
-#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
-#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
-#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
-#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
-
-#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
-
-/*
- * PBX PCI regions
- */
-#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_PBX_PROC_MASK          0xFF000000
-#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
-#define REALVIEW_PBX_PROC_ARM9          0x02000000
-#define REALVIEW_PBX_PROC_ARM11         0x04000000
-#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
-#define REALVIEW_PBX_PROC_A9MP          0x0C000000
-#define REALVIEW_PBX_PROC_A8            0x0E000000
-
-#define check_pbx_proc(proc_type)                                            \
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
-	== proc_type)
-
-#ifdef CONFIG_MACH_REALVIEW_PBX
-#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
-#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
-#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
-#else
-#define core_tile_pbx11mp()     0
-#define core_tile_pbxa9mp()     0
-#define core_tile_pbxa8()       0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
deleted file mode 100644
index a0ead0ae23d6..000000000000
--- a/arch/arm/mach-realview/core.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/smc91x.h>
-#include <linux/ata_platform.h>
-#include <linux/amba/mmci.h>
-#include <linux/gfp.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memblock.h>
-
-#include <clocksource/timer-sp804.h>
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "platform.h"
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-
-static void realview_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(REALVIEW_FLASHCTRL);
-	if (on)
-		val |= REALVIEW_FLASHPROG_FLVPPEN;
-	else
-		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
-	__raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static struct physmap_flash_data realview_flash_data = {
-	.width			= 4,
-	.set_vpp		= realview_flash_set_vpp,
-};
-
-struct platform_device realview_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &realview_flash_data,
-	},
-};
-
-int realview_flash_register(struct resource *res, u32 num)
-{
-	realview_flash_device.resource = res;
-	realview_flash_device.num_resources = num;
-	return platform_device_register(&realview_flash_device);
-}
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_NOWAIT,
-};
-
-static struct platform_device realview_eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.num_resources	= 2,
-};
-
-int realview_eth_register(const char *name, struct resource *res)
-{
-	if (name)
-		realview_eth_device.name = name;
-	realview_eth_device.resource = res;
-	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
-		realview_eth_device.dev.platform_data = &smsc911x_config;
-	else
-		realview_eth_device.dev.platform_data = &smc91x_platdata;
-
-	return platform_device_register(&realview_eth_device);
-}
-
-struct platform_device realview_usb_device = {
-	.name			= "isp1760",
-	.num_resources		= 2,
-};
-
-int realview_usb_register(struct resource *res)
-{
-	realview_usb_device.resource = res;
-	return platform_device_register(&realview_usb_device);
-}
-
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift		= 1,
-};
-
-static struct resource pata_resources[] = {
-	[0] = {
-		.start		= REALVIEW_CF_BASE,
-		.end		= REALVIEW_CF_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_CF_BASE + 0x100,
-		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_cf_device = {
-	.name			= "pata_platform",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pata_resources),
-	.resource		= pata_resources,
-	.dev			= {
-		.platform_data	= &pata_platform_data,
-	},
-};
-
-static struct resource realview_leds_resources[] = {
-	{
-		.start	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET,
-		.end	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(realview_leds_resources),
-	.resource	= realview_leds_resources,
-};
-
-static struct resource realview_i2c_resource = {
-	.start		= REALVIEW_I2C_BASE,
-	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device realview_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &realview_i2c_resource,
-};
-
-static struct i2c_board_info realview_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init realview_i2c_init(void)
-{
-	return i2c_register_board_info(0, realview_i2c_board_info,
-				       ARRAY_SIZE(realview_i2c_board_info));
-}
-arch_initcall(realview_i2c_init);
-
-#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
-
-/*
- * This is only used if GPIOLIB support is disabled
- */
-static unsigned int realview_mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (machine_is_realview_pb1176()) {
-		static bool inserted = false;
-
-		/*
-		 * The PB1176 does not have the status register,
-		 * assume it is inserted at startup, then invert
-		 * for each call so card insertion/removal will
-		 * be detected anyway. This will not be called if
-		 * GPIO on PL061 is active, which is the proper
-		 * way to do this on the PB1176.
-		 */
-		inserted = !inserted;
-		return inserted ? 0 : 1;
-	}
-
-	if (adev->res.start == REALVIEW_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(REALVIEW_SYSMCI) & mask;
-}
-
-struct mmci_platform_data realview_mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 17,
-	.gpio_cd	= 16,
-	.cd_invert	= true,
-};
-
-struct mmci_platform_data realview_mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 19,
-	.gpio_cd	= 18,
-	.cd_invert	= true,
-};
-
-void __init realview_init_early(void)
-{
-	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
-
-	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
-}
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void realview_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void realview_clcd_enable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	/*
-	 * Enable the PSUs
-	 */
-	val = readl(sys_clcd);
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int realview_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	const char *panel_name, *vga_panel_name;
-	unsigned long framesize;
-	u32 val;
-
-	if (machine_is_realview_eb()) {
-		/* VGA, 16bpp */
-		framesize = 640 * 480 * 2;
-		vga_panel_name = "VGA";
-	} else {
-		/* XVGA, 16bpp */
-		framesize = 1024 * 768 * 2;
-		vga_panel_name = "XVGA";
-	}
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5)
-		panel_name = "Sanyo QVGA Portrait";
-	else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = vga_panel_name;
-	else {
-		pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
-		panel_name = vga_panel_name;
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-struct clcd_board clcd_plat_data = {
-	.name		= "RealView",
-	.caps		= CLCD_CAP_ALL,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= realview_clcd_disable,
-	.enable		= realview_clcd_enable,
-	.setup		= realview_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-/*
- * Where is the timer (VA)?
- */
-void __iomem *timer0_va_base;
-void __iomem *timer1_va_base;
-void __iomem *timer2_va_base;
-void __iomem *timer3_va_base;
-
-/*
- * Set up the clock source and clock events devices
- */
-void __init realview_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	REALVIEW_REFCLK is 32KHz
-	 *	REALVIEW_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(REALVIEW_SCTL_BASE));
-	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
-	       __io_address(REALVIEW_SCTL_BASE));
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(timer0_va_base);
-	sp804_timer_disable(timer1_va_base);
-	sp804_timer_disable(timer2_va_base);
-	sp804_timer_disable(timer3_va_base);
-
-	sp804_clocksource_init(timer3_va_base, "timer3");
-	sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
-}
-
-/*
- * Setup the memory banks.
- */
-void realview_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
-	 * Half of this is mirrored at 0.
-	 */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-	memblock_add(0x70000000, SZ_512M);
-#else
-	memblock_add(0, SZ_256M);
-#endif
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
deleted file mode 100644
index 05a995ea16d3..000000000000
--- a/arch/arm/mach-realview/core.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_REALVIEW_H
-#define __ASM_ARCH_REALVIEW_H
-
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-
-#define APB_DEVICE(name, busid, base, plat)			\
-static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)			\
-static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-struct machine_desc;
-
-extern struct platform_device realview_flash_device;
-extern struct platform_device realview_cf_device;
-extern struct platform_device realview_leds_device;
-extern struct platform_device realview_i2c_device;
-extern struct mmci_platform_data realview_mmc0_plat_data;
-extern struct mmci_platform_data realview_mmc1_plat_data;
-extern struct clcd_board clcd_plat_data;
-extern void __iomem *timer0_va_base;
-extern void __iomem *timer1_va_base;
-extern void __iomem *timer2_va_base;
-extern void __iomem *timer3_va_base;
-
-extern void realview_timer_init(unsigned int timer_irq);
-extern int realview_flash_register(struct resource *res, u32 num);
-extern int realview_eth_register(const char *name, struct resource *res);
-extern int realview_usb_register(struct resource *res);
-extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from);
-
-extern const struct smp_operations realview_smp_ops;
-extern void realview_cpu_die(unsigned int cpu);
-
-#endif
diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h
deleted file mode 100644
index 957a230aadf4..000000000000
--- a/arch/arm/mach-realview/hardware.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-/*
- * Statically mapped addresses:
- *
- * 10xx xxxx -> fbxx xxxx
- * 1exx xxxx -> fdxx xxxx
- * 1fxx xxxx -> fexx xxxx
- */
-#define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
-#else
-#define IO_ADDRESS(x)		(x)
-#endif
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-realview/hotplug.h b/arch/arm/mach-realview/hotplug.h
new file mode 100644
index 000000000000..eacd7a4dad2f
--- /dev/null
+++ b/arch/arm/mach-realview/hotplug.h
@@ -0,0 +1 @@
+void realview_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
deleted file mode 100644
index 61e31680a749..000000000000
--- a/arch/arm/mach-realview/irqs-eb.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_EB_H
-#define __MACH_IRQS_EB_H
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-/*
- * The 11MPcore tile leaves the following unconnected.
- */
-#define IRQ_EB11MP_UART2	0
-#define IRQ_EB11MP_UART3	0
-#define IRQ_EB11MP_CLCD		0
-#define IRQ_EB11MP_DMA		0
-#define IRQ_EB11MP_WDOG		0
-#define IRQ_EB11MP_GPIO0	0
-#define IRQ_EB11MP_GPIO1	0
-#define IRQ_EB11MP_GPIO2	0
-#define IRQ_EB11MP_SCI		0
-#define IRQ_EB11MP_SSP		0
-
-#define NR_GIC_EB11MP		2
-
-#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
deleted file mode 100644
index 778edfd430e7..000000000000
--- a/arch/arm/mach-realview/irqs-pb1176.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB1176_H
-#define __MACH_IRQS_PB1176_H
-
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
-#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_SCTL		-1
-
-#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
deleted file mode 100644
index 938898a3df9f..000000000000
--- a/arch/arm/mach-realview/irqs-pb11mp.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB11MP_H
-#define __MACH_IRQS_PB11MP_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
deleted file mode 100644
index 262e321938b8..000000000000
--- a/arch/arm/mach-realview/irqs-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PBA8_H
-#define __MACH_IRQS_PBA8_H
-
-#define IRQ_PBA8_GIC_START			32
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
deleted file mode 100644
index 4ef0567dec32..000000000000
--- a/arch/arm/mach-realview/irqs-pbx.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_IRQS_PBX_H
-#define __MACH_IRQS_PBX_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_PBX_GIC_START			32
-
-/*
- * PBX on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
-#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
-#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC		-1
-#define IRQ_PBX_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h
deleted file mode 100644
index 11121739d371..000000000000
--- a/arch/arm/mach-realview/platform.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * CompactFlash
- */
-#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
-#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c
index 6964e8876061..70ca99eb52c6 100644
--- a/arch/arm/mach-realview/platsmp-dt.c
+++ b/arch/arm/mach-realview/platsmp-dt.c
@@ -17,8 +17,7 @@
 #include <asm/smp_scu.h>
 
 #include <plat/platsmp.h>
-
-#include "core.h"
+#include "hotplug.h"
 
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
deleted file mode 100644
index e8ab69c7abfb..000000000000
--- a/arch/arm/mach-realview/platsmp.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
-
-#include "board-eb.h"
-#include "board-pb11mp.h"
-#include "board-pbx.h"
-
-#include <plat/platsmp.h>
-
-#include "core.h"
-
-static void __iomem *scu_base_addr(void)
-{
-	if (machine_is_realview_eb_mp())
-		return __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		return __io_address(REALVIEW_TC11MP_SCU_BASE);
-	else if (machine_is_realview_pbx() &&
-		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
-		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
-	else
-		return (void __iomem *)0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init realview_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(versatile_secondary_startup),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-}
-
-const struct smp_operations realview_smp_ops __initconst = {
-	.smp_init_cpus		= realview_smp_init_cpus,
-	.smp_prepare_cpus	= realview_smp_prepare_cpus,
-	.smp_secondary_init	= versatile_secondary_init,
-	.smp_boot_secondary	= versatile_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= realview_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
deleted file mode 100644
index b442fa61e943..000000000000
--- a/arch/arm/mach-realview/realview_eb.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_eb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-#include <asm/system_info.h>
-#include <asm/outercache.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-eb.h"
-#include "irqs-eb.h"
-
-#include "core.h"
-
-static struct map_desc realview_eb_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-#endif
-};
-
-static struct map_desc realview_eb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init realview_eb_map_io(void)
-{
-	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView EB AMBA devices
- */
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
-
-#define AACI_IRQ	{ IRQ_EB_AACI }
-#define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0 }
-#define KMI1_IRQ	{ IRQ_EB_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define EB_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
-#define DMAC_IRQ	{ IRQ_EB_DMA }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_EB_SCI }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView EB platform devices
- */
-static struct resource realview_eb_flash_resource = {
-	.start			= REALVIEW_EB_FLASH_BASE,
-	.end			= REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct resource realview_eb_eth_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_ETH_BASE,
-		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_ETH,
-		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/*
- * Detect and register the correct Ethernet device. RealView/EB rev D
- * platforms use the newer SMSC LAN9118 Ethernet chip
- */
-static int eth_device_register(void)
-{
-	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
-	const char *name = NULL;
-	u32 idrev;
-
-	if (!eth_addr)
-		return -ENOMEM;
-
-	idrev = readl(eth_addr + 0x50);
-	if ((idrev & 0xFFFF0000) != 0x01180000)
-		/* SMSC LAN9118 not present, use LAN91C111 instead */
-		name = "smc91x";
-
-	iounmap(eth_addr);
-	return realview_eth_register(name, realview_eb_eth_resources);
-}
-
-static struct resource realview_eb_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_USB_BASE,
-		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_USB,
-		.end		= IRQ_EB_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_EB11MP_PMU_CPU0,
-		.end		= IRQ_EB11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_EB11MP_PMU_CPU1,
-		.end		= IRQ_EB11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_EB11MP_PMU_CPU2,
-		.end		= IRQ_EB11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_EB11MP_PMU_CPU3,
-		.end		= IRQ_EB11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EB_CHARLCD,
-		.end	= IRQ_EB_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		unsigned int pldctrl;
-
-		/* new irq mode */
-		writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-		pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		pldctrl |= 0x00800000;
-		writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-		/* core tile GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
-
-#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
-		/* board GIC, secondary */
-		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
-#endif
-	} else {
-		/* board GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-	}
-}
-
-/*
- * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
- */
-static void realview_eb11mp_fixup(void)
-{
-	/* AMBA devices */
-	dmac_device.irq[0]	= IRQ_EB11MP_DMA;
-	uart0_device.irq[0]	= IRQ_EB11MP_UART0;
-	uart1_device.irq[0]	= IRQ_EB11MP_UART1;
-	uart2_device.irq[0]	= IRQ_EB11MP_UART2;
-	uart3_device.irq[0]	= IRQ_EB11MP_UART3;
-	clcd_device.irq[0]	= IRQ_EB11MP_CLCD;
-	wdog_device.irq[0]	= IRQ_EB11MP_WDOG;
-	gpio0_device.irq[0]	= IRQ_EB11MP_GPIO0;
-	gpio1_device.irq[0]	= IRQ_EB11MP_GPIO1;
-	gpio2_device.irq[0]	= IRQ_EB11MP_GPIO2;
-	rtc_device.irq[0]	= IRQ_EB11MP_RTC;
-	sci0_device.irq[0]	= IRQ_EB11MP_SCI;
-	ssp0_device.irq[0]	= IRQ_EB11MP_SSP;
-	aaci_device.irq[0]	= IRQ_EB11MP_AACI;
-	mmc0_device.irq[0]	= IRQ_EB11MP_MMCI0A;
-	mmc0_device.irq[1]	= IRQ_EB11MP_MMCI0B;
-	kmi0_device.irq[0]	= IRQ_EB11MP_KMI0;
-	kmi1_device.irq[0]	= IRQ_EB11MP_KMI1;
-
-	/* platform devices */
-	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
-	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
-	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
-	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_EB11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_eb_twd_init(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		int err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define realview_eb_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_eb_timer_init(void)
-{
-	unsigned int timer_irq;
-
-	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
-
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		timer_irq = IRQ_EB11MP_TIMER0_1;
-	else
-		timer_irq = IRQ_EB_TIMER0_1;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(timer_irq);
-	realview_eb_twd_init();
-}
-
-static void realview_eb_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	if (core_tile_eb11mp())
-		__raw_writel(0x0008, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_eb_init(void)
-{
-	int i;
-
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		realview_eb11mp_fixup();
-
-#ifdef CONFIG_CACHE_L2X0
-		/*
-		 * The PL220 needs to be manually configured as the hardware
-		 * doesn't report the correct sizes.
-		 * 1MB (128KB/way), 8-way associativity, event monitor and
-		 * parity enabled, ignore share bit, no force write allocate
-		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-		 */
-		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
-
-		/*
-		 * due to a bug in the l220 cache controller, we must not call
-		 * the sync function. stub it out here instead!
-		 */
-		outer_cache.sync = NULL;
-#endif
-		pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
-		platform_device_register(&pmu_device);
-	}
-
-	realview_flash_register(&realview_eb_flash_resource, 1);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-	eth_device_register();
-	realview_usb_register(realview_eb_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_eb_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_eb_timer_init,
-	.init_machine	= realview_eb_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_eb_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
deleted file mode 100644
index 537f3878d501..000000000000
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb1176.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-pb1176.h"
-#include "irqs-pb1176.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb1176_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb1176_map_io(void)
-{
-	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB1176 AMBA devices
- */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
-#define AACI_IRQ	{ IRQ_PB1176_AACI }
-#define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
-#define PB1176_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
-#define SCTL_IRQ	{ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
-#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
-#define SCI_IRQ		{ IRQ_PB1176_SCI }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&uart4_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB1176 platform devices
- */
-static struct resource realview_pb1176_flash_resources[] = {
-	{
-		.start		= REALVIEW_PB1176_FLASH_BASE,
-		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
-	{
-		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
-		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct physmap_flash_data pb1176_rom_pdata = {
-	.probe_type	= "map_rom",
-	.width		= 4,
-	.nr_parts	= 0,
-};
-
-static struct resource pb1176_rom_resources[] = {
-	/*
-	 * This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
-	 * The reference manual states that this is actually a pseudo-ROM
-	 * programmed in NVRAM.
-	 */
-	{
-		.start		= REALVIEW_DC1176_ROM_BASE,
-		.end		= REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device pb1176_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pb1176_rom_resources),
-	.resource	= pb1176_rom_resources,
-	.dev = {
-		.platform_data = &pb1176_rom_pdata,
-	},
-};
-
-static struct resource realview_pb1176_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_ETH_BASE,
-		.end		= REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_ETH,
-		.end		= IRQ_PB1176_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb1176_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_USB_BASE,
-		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_USB,
-		.end		= IRQ_PB1176_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_DC1176_CORE_PMU,
-	.end		= IRQ_DC1176_CORE_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_PB1176_CHARLCD,
-		.end	= IRQ_PB1176_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM1176 DevChip GIC, primary */
-	gic_init(0, IRQ_DC1176_GIC_START,
-		 __io_address(REALVIEW_DC1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_DC1176_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB1176_GIC_START,
-		 __io_address(REALVIEW_PB1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
-}
-
-static void __init realview_pb1176_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
-	realview_timer_init(IRQ_DC1176_TIMER0);
-}
-
-static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
-	dsb();
-}
-
-static void realview_pb1176_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * RealView PB1176 only has 128MB of RAM mapped at 0.
-	 */
-	memblock_add(0, SZ_128M);
-}
-
-static void __init realview_pb1176_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 128kB (16kB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 0011 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
-#endif
-
-	realview_flash_register(realview_pb1176_flash_resources,
-				ARRAY_SIZE(realview_pb1176_flash_resources));
-	platform_device_register(&pb1176_rom_device);
-	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	realview_usb_register(realview_pb1176_isp1761_resources);
-	platform_device_register(&pmu_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_pb1176_fixup,
-	.map_io		= realview_pb1176_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb1176_timer_init,
-	.init_machine	= realview_pb1176_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb1176_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
deleted file mode 100644
index a90a0752f157..000000000000
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb11mp.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/outercache.h>
-
-#include "board-pb11mp.h"
-#include "irqs-pb11mp.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb11mp_map_io(void)
-{
-	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB11MPCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI }
-#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
-#define PB11MP_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
-#define SCTL_IRQ		{ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB11MPCore platform devices
- */
-static struct resource realview_pb11mp_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_FLASH0_BASE,
-		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_FLASH1_BASE,
-		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pb11mp_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_ETH_BASE,
-		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_ETH,
-		.end		= IRQ_TC11MP_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb11mp_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_USB_BASE,
-		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_USB,
-		.end		= IRQ_TC11MP_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_TC11MP_PMU_CPU0,
-		.end		= IRQ_TC11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_PMU_CPU1,
-		.end		= IRQ_TC11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_TC11MP_PMU_CPU2,
-		.end		= IRQ_TC11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_TC11MP_PMU_CPU3,
-		.end		= IRQ_TC11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	unsigned int pldctrl;
-
-	/* new irq mode with no DCC */
-	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	pldctrl |= 2 << 22;
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-	/* ARM11MPCore test chip GIC, primary */
-	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB11MP_GIC_START,
-		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_TC11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pb11mp_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pb11mp_twd_init()	do {} while(0)
-#endif
-
-static void __init realview_pb11mp_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_TC11MP_TIMER0_1);
-	realview_pb11mp_twd_init();
-}
-
-static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pb11mp_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 1MB (128KB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
-	/*
-	 * due to a bug in the l220 cache controller, we must not call
-	 * the sync function. stub it out here instead!
-	 */
-	outer_cache.sync = NULL;
-#endif
-
-	realview_flash_register(realview_pb11mp_flash_resource,
-				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pb11mp_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_pb11mp_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb11mp_timer_init,
-	.init_machine	= realview_pb11mp_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb11mp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
deleted file mode 100644
index ddafb67c2b6f..000000000000
--- a/arch/arm/mach-realview/realview_pba8.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pba8.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pba8.h"
-#include "irqs-pba8.h"
-
-#include "core.h"
-
-static struct map_desc realview_pba8_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pba8_map_io(void)
-{
-	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBA8Core AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBA8_AACI }
-#define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
-#define PBA8_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
-#define SCTL_IRQ		{ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
-#define SCI_IRQ			{ IRQ_PBA8_SCI }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-A8 platform devices
- */
-static struct resource realview_pba8_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_FLASH0_BASE,
-		.end		= REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PBA8_FLASH1_BASE,
-		.end		= REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pba8_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_ETH_BASE,
-		.end		= REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_ETH,
-		.end		= IRQ_PBA8_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pba8_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_USB_BASE,
-		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_USB,
-		.end		= IRQ_PBA8_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_PBA8_PMU,
-	.end		= IRQ_PBA8_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PB-A8 on-board GIC */
-	gic_init(0, IRQ_PBA8_GIC_START,
-		 __io_address(REALVIEW_PBA8_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
-}
-
-static void __init realview_pba8_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBA8_TIMER0_1);
-}
-
-static void realview_pba8_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pba8_init(void)
-{
-	int i;
-
-	realview_flash_register(realview_pba8_flash_resource,
-				ARRAY_SIZE(realview_pba8_flash_resource));
-	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pba8_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_pba8_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pba8_timer_init,
-	.init_machine	= realview_pba8_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pba8_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
deleted file mode 100644
index be1cec5fe3ad..000000000000
--- a/arch/arm/mach-realview/realview_pbx.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- *  arch/arm/mach-realview/realview_pbx.c
- *
- *  Copyright (C) 2009 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/smp_twd.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pbx.h"
-#include "irqs-pbx.h"
-
-#include "core.h"
-
-static struct map_desc realview_pbx_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static struct map_desc realview_local_io_desc[] __initdata = {
-	{
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	}
-};
-
-static void __init realview_pbx_map_io(void)
-{
-	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBXCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBX_AACI }
-#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
-#define PBX_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC }
-#define SCTL_IRQ		{ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
-#define SCI_IRQ			{ IRQ_PBX_SCI }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-X platform devices
- */
-static struct resource realview_pbx_flash_resources[] = {
-	[0] = {
-		.start          = REALVIEW_PBX_FLASH0_BASE,
-		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = REALVIEW_PBX_FLASH1_BASE,
-		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pbx_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_ETH_BASE,
-		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_ETH,
-		.end		= IRQ_PBX_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pbx_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_USB_BASE,
-		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_USB,
-		.end		= IRQ_PBX_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#ifdef CONFIG_CACHE_L2X0
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_PBX_PMU_CPU0,
-		.end		= IRQ_PBX_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_PBX_PMU_CPU1,
-		.end		= IRQ_PBX_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_PBX_PMU_CPU2,
-		.end		= IRQ_PBX_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_PBX_PMU_CPU3,
-		.end		= IRQ_PBX_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-#endif
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PBX on-board GIC */
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
-		gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
-	} else {
-		gic_init(0, IRQ_PBX_GIC_START,
-			 __io_address(REALVIEW_PBX_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_GIC_CPU_BASE));
-	}
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_PBX_TILE_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pbx_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pbx_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_pbx_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBX_TIMER0_1);
-	realview_pbx_twd_init();
-}
-
-static void realview_pbx_fixup(struct tag *tags, char **from)
-{
-#ifdef CONFIG_SPARSEMEM
-	/*
-	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
-	 * asm/mach/memory.h for more information).
-	 */
-
-	memblock_add(0, SZ_256M);
-	memblock_add(0x20000000, SZ_512M);
-	memblock_add(0x80000000, SZ_256M);
-#else
-	realview_fixup(tags, from);
-#endif
-}
-
-static void realview_pbx_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x00F0, reset_ctrl);
-	__raw_writel(0x00F4, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pbx_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	if (core_tile_pbxa9mp()) {
-		void __iomem *l2x0_base =
-			__io_address(REALVIEW_PBX_TILE_L220_BASE);
-
-		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
-
-		/* 16KB way size, 8-way associativity, parity disabled
-		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
-		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
-		platform_device_register(&pmu_device);
-	}
-#endif
-
-	realview_flash_register(realview_pbx_flash_resources,
-				ARRAY_SIZE(realview_pbx_flash_resources));
-	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pbx_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_pbx_fixup,
-	.map_io		= realview_pbx_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pbx_timer_init,
-	.init_machine	= realview_pbx_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pbx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4a48c9f5f725..09817bae4558 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,7 +22,6 @@ config ARCH_RCAR_GEN2
 	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
-	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b7260c2b510c..1b6cae5e78f4 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -20,7 +20,6 @@ config ARCH_SPEAR13XX
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	help
 	  Supports for ARM's SPEAR13XX family
 
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b0cc26284fc9..c257d40ca51d 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -9,7 +9,6 @@ config ARCH_VERSATILE
 	select CPU_ARM926T
 	select ICST
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
diff --git a/drivers/clk/imx/clk-imx1.c b/drivers/clk/imx/clk-imx1.c
index 99cf802fa51f..eaa462ad09e8 100644
--- a/drivers/clk/imx/clk-imx1.c
+++ b/drivers/clk/imx/clk-imx1.c
@@ -45,10 +45,13 @@ static void __iomem *ccm __initdata;
 #define CCM_PCDR	(ccm + 0x0020)
 #define SCM_GCCR	(ccm + 0x0810)
 
-static void __init _mx1_clocks_init(unsigned long fref)
+static void __init mx1_clocks_init_dt(struct device_node *np)
 {
+	ccm = of_iomap(np, 0);
+	BUG_ON(!ccm);
+
 	clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
-	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+	clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", 32768);
 	clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
 	clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
 	clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
@@ -74,45 +77,6 @@ static void __init _mx1_clocks_init(unsigned long fref)
 	clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
 
 	imx_check_clocks(clk, ARRAY_SIZE(clk));
-}
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	ccm = ioremap(MX1_CCM_BASE_ADDR, SZ_4K);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(fref);
-
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
-	clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
-	clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
-	clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
-	clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
-
-	mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT, GPT_TYPE_IMX1);
-
-	return 0;
-}
-
-static void __init mx1_clocks_init_dt(struct device_node *np)
-{
-	ccm = of_iomap(np, 0);
-	BUG_ON(!ccm);
-
-	_mx1_clocks_init(32768);
 
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index b372e792adc2..e4dbfc85abdb 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
 obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
-obj-$(CONFIG_REALVIEW_DT)		+= irq-gic-realview.o
+obj-$(CONFIG_ARCH_REALVIEW)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
 obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 392f9eff5fb7..5bcc896a48c3 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -78,7 +78,7 @@ config MTD_PHYSMAP_OF_VERSATILE
 	bool "Support ARM Versatile physmap OF"
 	depends on MTD_PHYSMAP_OF
 	depends on MFD_SYSCON
-	default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || REALVIEW_DT)
+	default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
 	help
 	  This provides some extra DT physmap parsing for the ARM Versatile
 	  platforms, basically to add a VPP (write protection) callback so
author	Linus Torvalds <torvalds@linux-foundation.org>	2016-10-08 07:16:16 +0300
committer	Linus Torvalds <torvalds@linux-foundation.org>	2016-10-08 07:16:16 +0300
commit	a771151a8323a5ca81f443a9a439851b8a872c85 (patch)
tree	e1cd1a77beae03bb03ec238c227ae26199998dc7
parent	997b611baf7591ea5119539ee821a3e2f4fcf24e (diff)
parent	e13688fe618881dd407a68dfbd2295d70b21a445 (diff)
download	linux-a771151a8323a5ca81f443a9a439851b8a872c85.tar.xz