diff options
| author | Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> | 2026-01-12 20:35:54 +0300 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2026-01-18 02:17:25 +0300 |
| commit | 98e8039a3b14281b3240f0b40469041365d0e378 (patch) | |
| tree | 82e4d0c9c9e0db461ed22c0181dea090b728f281 | |
| parent | 2a14e91b6d76639dac70ea170f4384c1ee3cb48d (diff) | |
| download | linux-98e8039a3b14281b3240f0b40469041365d0e378.tar.xz | |
dt-bindings: net: pcs: renesas,rzn1-miic: Add phy_link property
Add the renesas,miic-phy-link-active-low property to allow configuring
the active level of phy_link status signals provided by the MIIC block.
EtherPHY link-up and link-down status is required as a hardware IP
feature independent of whether GMAC or ETHSW is used. With GMAC, link
state is retrieved via MDC/MDIO and handled in software. In contrast,
ETHSW exposes dedicated PHY_LINK pins that provide this information
directly in hardware.
These PHY_LINK signals are required not only for host-controlled traffic
but also for switch-only forwarding paths where frames are exchanged
between external nodes without CPU involvement. This is particularly
important for redundancy protocols such as DLR (Device Level Ring),
which depend on fast detection of link-down events caused by cable or
port failures. Handling such events purely in software introduces
latency, which is why ETHSW provides dedicated hardware PHY_LINK pins.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260112173555.1166714-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml index 3adbcf56d2be..f9d39114e667 100644 --- a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml +++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml @@ -86,6 +86,13 @@ patternProperties: and include/dt-bindings/net/renesas,r9a09g077-pcs-miic.h for RZ/N2H, RZ/T2H SoCs. $ref: /schemas/types.yaml#/definitions/uint32 + renesas,miic-phy-link-active-low: + type: boolean + description: Indicates that the PHY-link signal provided by the Ethernet switch, + EtherCAT, or SERCOS3 interface is active low. When present, this property + sets the corresponding signal polarity to active low. When omitted, the signal + defaults to active high. + required: - reg - renesas,miic-input |