diff options
| author | Riccardo Mereu <r.mereu@arduino.cc> | 2025-11-20 18:58:24 +0300 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2026-01-03 21:42:36 +0300 |
| commit | 925ac1f6ec75a773e0ec8b91673b647f6d456ccb (patch) | |
| tree | e9e3ff27a2c4669620667f553185d4516492770b | |
| parent | 311d173da672397a58498841299ec613ff9eb96b (diff) | |
| download | linux-925ac1f6ec75a773e0ec8b91673b647f6d456ccb.tar.xz | |
arm64: dts: qcom: agatti: add uart2 node
uart2 is used in Arduino UnoQ as an interface between microprocessor and
microcontroller.
Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251120155825.121483-6-r.mereu.kernel@arduino.cc
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/agatti.dtsi | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 8bf5c5583fc2..992a157c571f 100644 --- a/arch/arm64/boot/dts/qcom/agatti.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -562,6 +562,13 @@ bias-disable; }; + qup_uart2_default: qup-uart2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + qup_uart3_default: qup-uart3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; @@ -1315,6 +1322,23 @@ status = "disabled"; }; + uart2: serial@4a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a8c000 0x0 0x4000>; |