extcon: ptn5150: Add Type-C orientation switch support

PTN5150 is able to detect CC polarity. The field[1:0] of CC status
register (04H) will keep the result.

  00: Cable Not Attached
  01: CC1 is connected (normal orientation)
  10: CC2 is connected (reversed orientation)
  11: Reserved

Add orientation switch support to correctly set orientation of
multiplexer according to CC status.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250926025309.24267-2-xu.yang_2@nxp.com/

2 files changed, 41 insertions, 0 deletions

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index aec46bf03302..68d9df7d2dae 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -158,6 +158,7 @@ config EXTCON_PTN5150
 	tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
 	depends on I2C && (GPIOLIB || COMPILE_TEST)
 	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+	depends on TYPEC || !TYPEC
 	select REGMAP_I2C
 	help
 	  Say Y here to enable support for USB peripheral and USB host
diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 31970fb34fcb..de753d00c4c2 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -18,6 +18,7 @@
 #include <linux/extcon-provider.h>
 #include <linux/gpio/consumer.h>
 #include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
 
 /* PTN5150 registers */
 #define PTN5150_REG_DEVICE_ID			0x01
@@ -38,7 +39,11 @@
 #define PTN5150_REG_DEVICE_ID_VERSION		GENMASK(7, 3)
 #define PTN5150_REG_DEVICE_ID_VENDOR		GENMASK(2, 0)
 
+#define PTN5150_POLARITY_CC1			0x1
+#define PTN5150_POLARITY_CC2			0x2
+
 #define PTN5150_REG_CC_PORT_ATTACHMENT		GENMASK(4, 2)
+#define PTN5150_REG_CC_POLARITY			GENMASK(1, 0)
 #define PTN5150_REG_CC_VBUS_DETECTION		BIT(7)
 #define PTN5150_REG_INT_CABLE_ATTACH_MASK	BIT(0)
 #define PTN5150_REG_INT_CABLE_DETACH_MASK	BIT(1)
@@ -53,6 +58,7 @@ struct ptn5150_info {
 	int irq;
 	struct work_struct irq_work;
 	struct mutex mutex;
+	struct typec_switch *orient_sw;
 	struct usb_role_switch *role_sw;
 };
 
@@ -71,6 +77,7 @@ static const struct regmap_config ptn5150_regmap_config = {
 
 static void ptn5150_check_state(struct ptn5150_info *info)
 {
+	enum typec_orientation orient = TYPEC_ORIENTATION_NONE;
 	unsigned int port_status, reg_data, vbus;
 	enum usb_role usb_role = USB_ROLE_NONE;
 	int ret;
@@ -81,6 +88,23 @@ static void ptn5150_check_state(struct ptn5150_info *info)
 		return;
 	}
 
+	orient = FIELD_GET(PTN5150_REG_CC_POLARITY, reg_data);
+	switch (orient) {
+	case PTN5150_POLARITY_CC1:
+		orient = TYPEC_ORIENTATION_NORMAL;
+		break;
+	case PTN5150_POLARITY_CC2:
+		orient = TYPEC_ORIENTATION_REVERSE;
+		break;
+	default:
+		orient = TYPEC_ORIENTATION_NONE;
+		break;
+	}
+
+	ret = typec_switch_set(info->orient_sw, orient);
+	if (ret)
+		dev_err(info->dev, "failed to set orientation: %d\n", ret);
+
 	port_status = FIELD_GET(PTN5150_REG_CC_PORT_ATTACHMENT, reg_data);
 
 	switch (port_status) {
@@ -152,6 +176,12 @@ static void ptn5150_irq_work(struct work_struct *work)
 				dev_err(info->dev,
 					"failed to set none role: %d\n",
 					ret);
+
+			ret = typec_switch_set(info->orient_sw,
+					       TYPEC_ORIENTATION_NONE);
+			if (ret)
+				dev_err(info->dev,
+					"failed to set orientation: %d\n", ret);
 		}
 	}
 
@@ -219,12 +249,14 @@ static void ptn5150_work_sync_and_put(void *data)
 
 	cancel_work_sync(&info->irq_work);
 	usb_role_switch_put(info->role_sw);
+	typec_switch_put(info->orient_sw);
 }
 
 static int ptn5150_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
 	struct device_node *np = i2c->dev.of_node;
+	struct fwnode_handle *connector;
 	struct ptn5150_info *info;
 	int ret;
 
@@ -311,6 +343,14 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c)
 	if (ret)
 		return -EINVAL;
 
+	connector = device_get_named_child_node(dev, "connector");
+	if (connector) {
+		info->orient_sw = fwnode_typec_switch_get(connector);
+		if (IS_ERR(info->orient_sw))
+			return dev_err_probe(info->dev, PTR_ERR(info->orient_sw),
+					"failed to get orientation switch\n");
+	}
+
 	info->role_sw = usb_role_switch_get(info->dev);
 	if (IS_ERR(info->role_sw))
 		return dev_err_probe(info->dev, PTR_ERR(info->role_sw),