diff options
| author | Murali Karicheri <m-karicheri2@ti.com> | 2017-07-04 13:53:24 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-07-05 11:23:53 +0300 |
| commit | 371444764b9882d754d1e67dd212c932359a2293 (patch) | |
| tree | 481610b7bace6165ba28cfe1c54eeb9151d8133b | |
| parent | 908a7733250a2ebcacfafb2ebe0f25c853ac7fdc (diff) | |
| download | linux-371444764b9882d754d1e67dd212c932359a2293.tar.xz | |
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017,
advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not
supported (see note below Table 5 (4-Level Strap Pins)).
There are some boards which have the pin strapped this way and need
software workaround suggested by the data manual. Bit[7] of
Configuration Register 4 (address 0x0031) must be cleared to 0. This
ensures proper operation of the PHY.
Implement driver support for device-tree property meant to advertise
the wrong strapping.
[1] http://www.ti.com/lit/ds/snls484e/snls484e.pdf
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
[nsekhar@ti.com: rebase to mainline, code simplification]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/phy/dp83867.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index b57f20e552ba..c1ab976cc800 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -91,6 +91,7 @@ struct dp83867_private { int fifo_depth; int io_impedance; int port_mirroring; + bool rxctrl_strap_quirk; }; static int dp83867_ack_interrupt(struct phy_device *phydev) @@ -164,6 +165,9 @@ static int dp83867_of_init(struct phy_device *phydev) else if (of_property_read_bool(of_node, "ti,min-output-impedance")) dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN; + dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node, + "ti,dp83867-rxctrl-strap-quirk"); + ret = of_property_read_u32(of_node, "ti,rx-internal-delay", &dp83867->rx_id_delay); if (ret && @@ -214,6 +218,13 @@ static int dp83867_config_init(struct phy_device *phydev) dp83867 = (struct dp83867_private *)phydev->priv; } + /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */ + if (dp83867->rxctrl_strap_quirk) { + val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); + val &= ~BIT(7); + phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); + } + if (phy_interface_is_rgmii(phydev)) { val = phy_read(phydev, MII_DP83867_PHYCTRL); if (val < 0) |