bpf,x86: Implement JIT support for stack arguments

Add x86_64 JIT support for BPF functions and kfuncs with more than
5 arguments. The extra arguments are passed through a stack area
addressed by register r11 (BPF_REG_PARAMS) in BPF bytecode,
which the JIT translates to native code.

The JIT follows the x86-64 calling convention for both BPF-to-BPF
and kfunc calls:
  - Arg 6 is passed in the R9 register
  - Args 7+ are passed on the stack

Incoming arg 6 (BPF r11+8) is translated to a MOV from R9 rather
than a memory load. Incoming args 7+ (BPF r11+16, r11+24, ...) map
directly to [rbp + 16], [rbp + 24], ..., matching the x86-64 stack
layout after CALL + PUSH RBP, so no offset adjustment is needed.

tail_call_reachable is rejected by the verifier and priv_stack is
disabled by the JIT when stack args exist, so R9 is always
available. When BPF bytecode writes to the arg-6 stack slot
(offset -8), the JIT emits a MOV into R9 instead of a memory store.
Outgoing args 7+ are placed at [rsp] in a pre-allocated area below
callee-saved registers, using:
  native_off = outgoing_arg_base - outgoing_rsp - bpf_off - 16

The native x86_64 stack layout with stack arguments:

  high address
  +-------------------------+
  | incoming stack arg N    |  [rbp + 16 + (N-7)*8]  (from caller)
  | ...                     |
  | incoming stack arg 7    |  [rbp + 16]
  +-------------------------+
  | return address          |  [rbp + 8]
  | saved rbp               |  [rbp]
  +-------------------------+
  | BPF program stack       |  (round_up(stack_depth, 8) bytes)
  +-------------------------+
  | callee-saved regs       |  (r12, rbx, r13, r14, r15 as needed)
  +-------------------------+
  | outgoing arg M          |  [rsp + (M-7)*8]
  | ...                     |
  | outgoing arg 7          |  [rsp]
  +-------------------------+  rsp
  low address

Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045122.2393118-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

3 files changed, 154 insertions, 6 deletions

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index ea9e707e8abf..ceefefb4da21 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -10,6 +10,7 @@
 #include <linux/if_vlan.h>
 #include <linux/bitfield.h>
 #include <linux/bpf.h>
+#include <linux/bpf_verifier.h>
 #include <linux/memory.h>
 #include <linux/sort.h>
 #include <asm/extable.h>
@@ -390,6 +391,34 @@ static void pop_callee_regs(u8 **pprog, bool *callee_regs_used)
 	*pprog = prog;
 }
 
+/* add rsp, depth */
+static void emit_add_rsp(u8 **pprog, u16 depth)
+{
+	u8 *prog = *pprog;
+
+	if (!depth)
+		return;
+	if (is_imm8(depth))
+		EMIT4(0x48, 0x83, 0xC4, depth); /* add rsp, imm8 */
+	else
+		EMIT3_off32(0x48, 0x81, 0xC4, depth); /* add rsp, imm32 */
+	*pprog = prog;
+}
+
+/* sub rsp, depth */
+static void emit_sub_rsp(u8 **pprog, u16 depth)
+{
+	u8 *prog = *pprog;
+
+	if (!depth)
+		return;
+	if (is_imm8(depth))
+		EMIT4(0x48, 0x83, 0xEC, depth); /* sub rsp, imm8 */
+	else
+		EMIT3_off32(0x48, 0x81, 0xEC, depth); /* sub rsp, imm32 */
+	*pprog = prog;
+}
+
 static void emit_nops(u8 **pprog, int len)
 {
 	u8 *prog = *pprog;
@@ -1659,21 +1688,47 @@ static int do_jit(struct bpf_verifier_env *env, struct bpf_prog *bpf_prog, int *
 	bool seen_exit = false;
 	u8 temp[BPF_MAX_INSN_SIZE + BPF_INSN_SAFETY];
 	void __percpu *priv_frame_ptr = NULL;
+	u16 out_stack_arg_cnt, outgoing_rsp;
 	u64 arena_vm_start, user_vm_start;
 	void __percpu *priv_stack_ptr;
 	int i, excnt = 0;
 	int ilen, proglen = 0;
 	u8 *ip, *prog = temp;
 	u32 stack_depth;
+	int callee_saved_size;
+	s32 outgoing_arg_base;
 	int err;
 
 	stack_depth = bpf_prog->aux->stack_depth;
+	out_stack_arg_cnt = bpf_out_stack_arg_cnt(env, bpf_prog);
 	priv_stack_ptr = bpf_prog->aux->priv_stack_ptr;
 	if (priv_stack_ptr) {
 		priv_frame_ptr = priv_stack_ptr + PRIV_STACK_GUARD_SZ + round_up(stack_depth, 8);
 		stack_depth = 0;
 	}
 
+	/*
+	 * Follow x86-64 calling convention for both BPF-to-BPF and
+	 * kfunc calls:
+	 *   - Arg 6 is passed in R9 register
+	 *   - Args 7+ are passed on the stack at [rsp]
+	 *
+	 * Incoming arg 6 is read from R9 (BPF r11+8 → MOV from R9).
+	 * Incoming args 7+ are read from [rbp + 16], [rbp + 24], ...
+	 * (BPF r11+16, r11+24, ... map directly with no offset change).
+	 *
+	 * tail_call_reachable is rejected by the verifier and priv_stack
+	 * is disabled by the JIT when stack args exist, so R9 is always
+	 * available.
+	 *
+	 * Stack layout (high to low):
+	 *   [rbp + 16 + ...]    incoming stack args 7+ (from caller)
+	 *   [rbp + 8]           return address
+	 *   [rbp]               saved rbp
+	 *   [rbp - prog_stack]  program stack
+	 *   [below]             callee-saved regs
+	 *   [below]             outgoing args 7+ (= rsp)
+	 */
 	arena_vm_start = bpf_arena_get_kern_vm_start(bpf_prog->aux->arena);
 	user_vm_start = bpf_arena_get_user_vm_start(bpf_prog->aux->arena);
 
@@ -1700,6 +1755,42 @@ static int do_jit(struct bpf_verifier_env *env, struct bpf_prog *bpf_prog, int *
 			push_r12(&prog);
 		push_callee_regs(&prog, callee_regs_used);
 	}
+
+	/* Compute callee-saved register area size. */
+	callee_saved_size = 0;
+	if (bpf_prog->aux->exception_boundary || arena_vm_start)
+		callee_saved_size += 8; /* r12 */
+	if (bpf_prog->aux->exception_boundary) {
+		callee_saved_size += 4 * 8; /* rbx, r13, r14, r15 */
+	} else {
+		int j;
+
+		for (j = 0; j < 4; j++)
+			if (callee_regs_used[j])
+				callee_saved_size += 8;
+	}
+	/*
+	 * Base offset from rbp for translating BPF outgoing args 7+
+	 * to native offsets. BPF uses negative offsets from r11
+	 * (r11-8 for arg6, r11-16 for arg7, ...) while x86 uses
+	 * positive offsets from rsp ([rsp+0] for arg7, [rsp+8] for
+	 * arg8, ...). Arg 6 goes to R9 directly.
+	 *
+	 * The translation reverses direction:
+	 *   native_off = outgoing_arg_base - outgoing_rsp - bpf_off - 16
+	 *
+	 * Note that tail_call_reachable is guaranteed to be false when
+	 * stack args exist, so tcc pushes need not be accounted for.
+	 */
+	outgoing_arg_base = -(round_up(stack_depth, 8) + callee_saved_size);
+
+	/*
+	 * Allocate outgoing stack arg area for args 7+ only.
+	 * Arg 6 goes into r9 register, not on stack.
+	 */
+	outgoing_rsp = out_stack_arg_cnt > 1 ? (out_stack_arg_cnt - 1) * 8 : 0;
+	emit_sub_rsp(&prog, outgoing_rsp);
+
 	if (arena_vm_start)
 		emit_mov_imm64(&prog, X86_REG_R12,
 			       arena_vm_start >> 32, (u32) arena_vm_start);
@@ -1721,7 +1812,7 @@ static int do_jit(struct bpf_verifier_env *env, struct bpf_prog *bpf_prog, int *
 		u8 b2 = 0, b3 = 0;
 		u8 *start_of_ldx;
 		s64 jmp_offset;
-		s16 insn_off;
+		s32 insn_off;
 		u8 jmp_cond;
 		u8 *func;
 		int nops;
@@ -2134,12 +2225,27 @@ static int do_jit(struct bpf_verifier_env *env, struct bpf_prog *bpf_prog, int *
 				EMIT1(0xC7);
 			goto st;
 		case BPF_ST | BPF_MEM | BPF_DW:
+			if (dst_reg == BPF_REG_PARAMS && insn->off == -8) {
+				/* Arg 6: store immediate in r9 register */
+				emit_mov_imm64(&prog, X86_REG_R9, imm32 >> 31, (u32)imm32);
+				break;
+			}
 			EMIT2(add_1mod(0x48, dst_reg), 0xC7);
 
-st:			if (is_imm8(insn->off))
-				EMIT2(add_1reg(0x40, dst_reg), insn->off);
+st:			insn_off = insn->off;
+			if (dst_reg == BPF_REG_PARAMS) {
+				/*
+				 * Args 7+: reverse BPF negative offsets to
+				 * x86 positive rsp offsets.
+				 * BPF off=-16 → [rsp+0], off=-24 → [rsp+8], ...
+				 */
+				insn_off = outgoing_arg_base - outgoing_rsp - insn_off - 16;
+				dst_reg = BPF_REG_FP;
+			}
+			if (is_imm8(insn_off))
+				EMIT2(add_1reg(0x40, dst_reg), insn_off);
 			else
-				EMIT1_off32(add_1reg(0x80, dst_reg), insn->off);
+				EMIT1_off32(add_1reg(0x80, dst_reg), insn_off);
 
 			EMIT(imm32, bpf_size_to_x86_bytes(BPF_SIZE(insn->code)));
 			break;
@@ -2149,7 +2255,17 @@ st:			if (is_imm8(insn->off))
 		case BPF_STX | BPF_MEM | BPF_H:
 		case BPF_STX | BPF_MEM | BPF_W:
 		case BPF_STX | BPF_MEM | BPF_DW:
-			emit_stx(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
+			if (dst_reg == BPF_REG_PARAMS && insn->off == -8) {
+				/* Arg 6: store register value in r9 */
+				EMIT_mov(X86_REG_R9, src_reg);
+				break;
+			}
+			insn_off = insn->off;
+			if (dst_reg == BPF_REG_PARAMS) {
+				insn_off = outgoing_arg_base - outgoing_rsp - insn_off - 16;
+				dst_reg = BPF_REG_FP;
+			}
+			emit_stx(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn_off);
 			break;
 
 		case BPF_ST | BPF_PROBE_MEM32 | BPF_B:
@@ -2248,6 +2364,19 @@ populate_extable:
 		case BPF_LDX | BPF_PROBE_MEMSX | BPF_H:
 		case BPF_LDX | BPF_PROBE_MEMSX | BPF_W:
 			insn_off = insn->off;
+			if (src_reg == BPF_REG_PARAMS) {
+				if (insn_off == 8) {
+					/* Incoming arg 6: read from r9 */
+					EMIT_mov(dst_reg, X86_REG_R9);
+					break;
+				}
+				src_reg = BPF_REG_FP;
+				/*
+				 * Incoming args 7+: native_off == bpf_off
+				 * (r11+16 → [rbp+16], r11+24 → [rbp+24], ...)
+				 * No offset adjustment needed.
+				 */
+			}
 
 			if (BPF_MODE(insn->code) == BPF_PROBE_MEM ||
 			    BPF_MODE(insn->code) == BPF_PROBE_MEMSX) {
@@ -2736,6 +2865,8 @@ emit_jmp:
 				if (emit_spectre_bhb_barrier(&prog, ip, bpf_prog))
 					return -EINVAL;
 			}
+			/* Deallocate outgoing args 7+ area. */
+			emit_add_rsp(&prog, outgoing_rsp);
 			if (bpf_prog->aux->exception_boundary) {
 				pop_callee_regs(&prog, all_callee_regs_used);
 				pop_r12(&prog);
@@ -3793,7 +3924,8 @@ skip_init_addrs:
 	for (pass = 0; pass < MAX_PASSES || image; pass++) {
 		if (!padding && pass >= PADDING_PASSES)
 			padding = true;
-		proglen = do_jit(env, prog, addrs, image, rw_image, oldproglen, &ctx, padding);
+		proglen = do_jit(env, prog, addrs, image, rw_image, oldproglen,
+				 &ctx, padding);
 		if (proglen <= 0) {
 out_image:
 			image = NULL;
@@ -3910,6 +4042,11 @@ bool bpf_jit_supports_kfunc_call(void)
 	return true;
 }
 
+bool bpf_jit_supports_stack_args(void)
+{
+	return true;
+}
+
 void *bpf_arch_text_copy(void *dst, void *src, size_t len)
 {
 	if (text_poke_copy(dst, src, len) == NULL)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 9e16e91647d3..242f9597d9ab 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1548,6 +1548,7 @@ void bpf_jit_uncharge_modmem(u32 size);
 bool bpf_prog_has_trampoline(const struct bpf_prog *prog);
 bool bpf_insn_is_indirect_target(const struct bpf_verifier_env *env, const struct bpf_prog *prog,
 				 int insn_idx);
+u16 bpf_out_stack_arg_cnt(const struct bpf_verifier_env *env, const struct bpf_prog *prog);
 #else
 static inline int bpf_trampoline_link_prog(struct bpf_tramp_link *link,
 					   struct bpf_trampoline *tr,
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index e6b836f846eb..427a6d828e01 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1582,6 +1582,16 @@ bool bpf_insn_is_indirect_target(const struct bpf_verifier_env *env, const struc
 	insn_idx += prog->aux->subprog_start;
 	return env->insn_aux_data[insn_idx].indirect_target;
 }
+
+u16 bpf_out_stack_arg_cnt(const struct bpf_verifier_env *env, const struct bpf_prog *prog)
+{
+	const struct bpf_subprog_info *sub;
+
+	if (!env)
+		return 0;
+	sub = &env->subprog_info[prog->aux->func_idx];
+	return sub->stack_arg_cnt - bpf_in_stack_arg_cnt(sub);
+}
 #endif /* CONFIG_BPF_JIT */
 
 /* Base function for offset calculation. Needs to go into .text section,