Merge branch 'dsa-microchip-phylink-mac-config'

Arun Ramadoss says:

====================
net: dsa: microchip: add support for phylink mac config and link up

This patch series add support common phylink mac config and link up for the ksz
series switches. At present, ksz8795 and ksz9477 doesn't implement the phylink
mac config and link up. It configures the mac interface in the port setup hook.
ksz8830 series switch does not mac link configuration. For lan937x switches, in
the part support patch series has support only for MII and RMII configuration.
Some group of switches have some register address and bit fields common and
others are different. So, this patch aims to have common phylink implementation
which configures the register based on the chip id.

Changes in v2
- combined the modification of duplex, tx_pause and rx_pause into single
  function.

Changes in v1
- Squash the reading rgmii value from dt to patch which apply the rgmii value
- Created the new function ksz_port_set_xmii_speed
- Seperated the namespace values for xmii_ctrl_0 and xmii_ctrl_1 register
- Applied the rgmii delay value based on the rx/tx-internal-delay-ps
====================

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 files changed, 431 insertions, 355 deletions

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 911aace42284..c79a5128235f 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -26,11 +26,6 @@
 #include "ksz8795_reg.h"
 #include "ksz8.h"
 
-static bool ksz_is_ksz88x3(struct ksz_device *dev)
-{
-	return dev->chip_id == 0x8830;
-}
-
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
 	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
@@ -1116,7 +1111,6 @@ void ksz8_port_mirror_del(struct ksz_device *dev, int port,
 static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
 {
 	struct ksz_port *p = &dev->ports[port];
-	u8 data8;
 
 	if (!p->interface && dev->compat_interface) {
 		dev_warn(dev->dev,
@@ -1125,40 +1119,6 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
 			 port);
 		p->interface = dev->compat_interface;
 	}
-
-	/* Configure MII interface for proper network communication. */
-	ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
-	data8 &= ~PORT_INTERFACE_TYPE;
-	data8 &= ~PORT_GMII_1GPS_MODE;
-	switch (p->interface) {
-	case PHY_INTERFACE_MODE_MII:
-		p->phydev.speed = SPEED_100;
-		break;
-	case PHY_INTERFACE_MODE_RMII:
-		data8 |= PORT_INTERFACE_RMII;
-		p->phydev.speed = SPEED_100;
-		break;
-	case PHY_INTERFACE_MODE_GMII:
-		data8 |= PORT_GMII_1GPS_MODE;
-		data8 |= PORT_INTERFACE_GMII;
-		p->phydev.speed = SPEED_1000;
-		break;
-	default:
-		data8 &= ~PORT_RGMII_ID_IN_ENABLE;
-		data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
-		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-		    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-			data8 |= PORT_RGMII_ID_IN_ENABLE;
-		if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-		    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-			data8 |= PORT_RGMII_ID_OUT_ENABLE;
-		data8 |= PORT_GMII_1GPS_MODE;
-		data8 |= PORT_INTERFACE_RGMII;
-		p->phydev.speed = SPEED_1000;
-		break;
-	}
-	ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
-	p->phydev.duplex = 1;
 }
 
 void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index a848eb4c54cb..77487d611824 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -170,15 +170,7 @@
 #define REG_PORT_5_CTRL_6		0x56
 
 #define PORT_MII_INTERNAL_CLOCK		BIT(7)
-#define PORT_GMII_1GPS_MODE		BIT(6)
-#define PORT_RGMII_ID_IN_ENABLE		BIT(4)
-#define PORT_RGMII_ID_OUT_ENABLE	BIT(3)
 #define PORT_GMII_MAC_MODE		BIT(2)
-#define PORT_INTERFACE_TYPE		0x3
-#define PORT_INTERFACE_MII		0
-#define PORT_INTERFACE_RMII		1
-#define PORT_INTERFACE_GMII		2
-#define PORT_INTERFACE_RGMII		3
 
 #define REG_PORT_1_CTRL_7		0x17
 #define REG_PORT_2_CTRL_7		0x27
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 6453642fa14c..4b14d80d27ed 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -19,11 +19,6 @@
 #include "ksz_common.h"
 #include "ksz9477.h"
 
-/* Used with variable features to indicate capabilities. */
-#define GBIT_SUPPORT			BIT(0)
-#define NEW_XMII			BIT(1)
-#define IS_9893				BIT(2)
-
 static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
 {
 	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
@@ -866,142 +861,18 @@ void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
 			     PORT_MIRROR_SNIFFER, false);
 }
 
-static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
-{
-	bool gbit;
-
-	if (dev->features & NEW_XMII)
-		gbit = !(data & PORT_MII_NOT_1GBIT);
-	else
-		gbit = !!(data & PORT_MII_1000MBIT_S1);
-	return gbit;
-}
-
-static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data)
-{
-	if (dev->features & NEW_XMII) {
-		if (gbit)
-			*data &= ~PORT_MII_NOT_1GBIT;
-		else
-			*data |= PORT_MII_NOT_1GBIT;
-	} else {
-		if (gbit)
-			*data |= PORT_MII_1000MBIT_S1;
-		else
-			*data &= ~PORT_MII_1000MBIT_S1;
-	}
-}
-
-static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
-{
-	int mode;
-
-	if (dev->features & NEW_XMII) {
-		switch (data & PORT_MII_SEL_M) {
-		case PORT_MII_SEL:
-			mode = 0;
-			break;
-		case PORT_RMII_SEL:
-			mode = 1;
-			break;
-		case PORT_GMII_SEL:
-			mode = 2;
-			break;
-		default:
-			mode = 3;
-		}
-	} else {
-		switch (data & PORT_MII_SEL_M) {
-		case PORT_MII_SEL_S1:
-			mode = 0;
-			break;
-		case PORT_RMII_SEL_S1:
-			mode = 1;
-			break;
-		case PORT_GMII_SEL_S1:
-			mode = 2;
-			break;
-		default:
-			mode = 3;
-		}
-	}
-	return mode;
-}
-
-static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
-{
-	u8 xmii;
-
-	if (dev->features & NEW_XMII) {
-		switch (mode) {
-		case 0:
-			xmii = PORT_MII_SEL;
-			break;
-		case 1:
-			xmii = PORT_RMII_SEL;
-			break;
-		case 2:
-			xmii = PORT_GMII_SEL;
-			break;
-		default:
-			xmii = PORT_RGMII_SEL;
-			break;
-		}
-	} else {
-		switch (mode) {
-		case 0:
-			xmii = PORT_MII_SEL_S1;
-			break;
-		case 1:
-			xmii = PORT_RMII_SEL_S1;
-			break;
-		case 2:
-			xmii = PORT_GMII_SEL_S1;
-			break;
-		default:
-			xmii = PORT_RGMII_SEL_S1;
-			break;
-		}
-	}
-	*data &= ~PORT_MII_SEL_M;
-	*data |= xmii;
-}
-
 static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
 {
 	phy_interface_t interface;
 	bool gbit;
-	int mode;
-	u8 data8;
 
 	if (port < dev->phy_port_cnt)
 		return PHY_INTERFACE_MODE_NA;
-	ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-	gbit = ksz9477_get_gbit(dev, data8);
-	mode = ksz9477_get_xmii(dev, data8);
-	switch (mode) {
-	case 2:
-		interface = PHY_INTERFACE_MODE_GMII;
-		if (gbit)
-			break;
-		fallthrough;
-	case 0:
-		interface = PHY_INTERFACE_MODE_MII;
-		break;
-	case 1:
-		interface = PHY_INTERFACE_MODE_RMII;
-		break;
-	default:
-		interface = PHY_INTERFACE_MODE_RGMII;
-		if (data8 & PORT_RGMII_ID_EG_ENABLE)
-			interface = PHY_INTERFACE_MODE_RGMII_TXID;
-		if (data8 & PORT_RGMII_ID_IG_ENABLE) {
-			interface = PHY_INTERFACE_MODE_RGMII_RXID;
-			if (data8 & PORT_RGMII_ID_EG_ENABLE)
-				interface = PHY_INTERFACE_MODE_RGMII_ID;
-		}
-		break;
-	}
+
+	gbit = ksz_get_gbit(dev, port);
+
+	interface = ksz_get_xmii(dev, port, gbit);
+
 	return interface;
 }
 
@@ -1073,10 +944,9 @@ void ksz9477_get_caps(struct ksz_device *dev, int port,
 
 void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
-	struct ksz_port *p = &dev->ports[port];
 	struct dsa_switch *ds = dev->ds;
-	u8 data8, member;
 	u16 data16;
+	u8 member;
 
 	/* enable tag tail for host port */
 	if (cpu_port)
@@ -1116,44 +986,6 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
 			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
 			     true);
-
-		/* configure MAC to 1G & RGMII mode */
-		ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-		switch (p->interface) {
-		case PHY_INTERFACE_MODE_MII:
-			ksz9477_set_xmii(dev, 0, &data8);
-			ksz9477_set_gbit(dev, false, &data8);
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_RMII:
-			ksz9477_set_xmii(dev, 1, &data8);
-			ksz9477_set_gbit(dev, false, &data8);
-			p->phydev.speed = SPEED_100;
-			break;
-		case PHY_INTERFACE_MODE_GMII:
-			ksz9477_set_xmii(dev, 2, &data8);
-			ksz9477_set_gbit(dev, true, &data8);
-			p->phydev.speed = SPEED_1000;
-			break;
-		default:
-			ksz9477_set_xmii(dev, 3, &data8);
-			ksz9477_set_gbit(dev, true, &data8);
-			data8 &= ~PORT_RGMII_ID_IG_ENABLE;
-			data8 &= ~PORT_RGMII_ID_EG_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-				data8 |= PORT_RGMII_ID_IG_ENABLE;
-			if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-			    p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-				data8 |= PORT_RGMII_ID_EG_ENABLE;
-			/* On KSZ9893, disable RGMII in-band status support */
-			if (dev->features & IS_9893)
-				data8 &= ~PORT_MII_MAC_MODE;
-			p->phydev.speed = SPEED_1000;
-			break;
-		}
-		ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
-		p->phydev.duplex = 1;
 	}
 
 	if (cpu_port)
@@ -1341,9 +1173,6 @@ int ksz9477_switch_init(struct ksz_device *dev)
 			dev->features &= ~GBIT_SUPPORT;
 		dev->phy_port_cnt = 2;
 	} else {
-		/* Chip uses new XMII register definitions. */
-		dev->features |= NEW_XMII;
-
 		/* Chip does not support gigabit. */
 		if (!(data8 & SW_GIGABIT_ABLE))
 			dev->features &= ~GBIT_SUPPORT;
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index d0cce4ca3cf9..ddf99d1e4bbd 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -1175,35 +1175,11 @@
 #define PORT_LINK_STATUS_FAIL		BIT(0)
 
 /* 3 - xMII */
-#define REG_PORT_XMII_CTRL_0		0x0300
-
 #define PORT_SGMII_SEL			BIT(7)
-#define PORT_MII_FULL_DUPLEX		BIT(6)
-#define PORT_MII_100MBIT		BIT(4)
 #define PORT_GRXC_ENABLE		BIT(0)
 
-#define REG_PORT_XMII_CTRL_1		0x0301
-
 #define PORT_RMII_CLK_SEL		BIT(7)
-/* S1 */
-#define PORT_MII_1000MBIT_S1		BIT(6)
-/* S2 */
-#define PORT_MII_NOT_1GBIT		BIT(6)
 #define PORT_MII_SEL_EDGE		BIT(5)
-#define PORT_RGMII_ID_IG_ENABLE		BIT(4)
-#define PORT_RGMII_ID_EG_ENABLE		BIT(3)
-#define PORT_MII_MAC_MODE		BIT(2)
-#define PORT_MII_SEL_M			0x3
-/* S1 */
-#define PORT_MII_SEL_S1			0x0
-#define PORT_RMII_SEL_S1		0x1
-#define PORT_GMII_SEL_S1		0x2
-#define PORT_RGMII_SEL_S1		0x3
-/* S2 */
-#define PORT_RGMII_SEL			0x0
-#define PORT_RMII_SEL			0x1
-#define PORT_GMII_SEL			0x2
-#define PORT_MII_SEL			0x3
 
 /* 4 - MAC */
 #define REG_PORT_MAC_CTRL_0		0x0400
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index fd12a68c1dcd..ed7d137cba99 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -222,8 +222,7 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mirror_add = ksz9477_port_mirror_add,
 	.mirror_del = ksz9477_port_mirror_del,
 	.get_caps = lan937x_phylink_get_caps,
-	.phylink_mac_config = lan937x_phylink_mac_config,
-	.phylink_mac_link_up = lan937x_phylink_mac_link_up,
+	.setup_rgmii_delay = lan937x_setup_rgmii_delay,
 	.fdb_dump = ksz9477_fdb_dump,
 	.fdb_add = ksz9477_fdb_add,
 	.fdb_del = ksz9477_fdb_del,
@@ -257,6 +256,8 @@ static const u16 ksz8795_regs[] = {
 	[S_START_CTRL]			= 0x01,
 	[S_BROADCAST_CTRL]		= 0x06,
 	[S_MULTICAST_CTRL]		= 0x04,
+	[P_XMII_CTRL_0]			= 0x06,
+	[P_XMII_CTRL_1]			= 0x56,
 };
 
 static const u32 ksz8795_masks[] = {
@@ -279,6 +280,24 @@ static const u32 ksz8795_masks[] = {
 	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(26, 20),
 	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(26, 24),
 	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(28, 27),
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(5),
+};
+
+static const u8 ksz8795_xmii_ctrl0[] = {
+	[P_MII_100MBIT]			= 0,
+	[P_MII_10MBIT]			= 1,
+	[P_MII_FULL_DUPLEX]		= 0,
+	[P_MII_HALF_DUPLEX]		= 1,
+};
+
+static const u8 ksz8795_xmii_ctrl1[] = {
+	[P_RGMII_SEL]			= 3,
+	[P_GMII_SEL]			= 2,
+	[P_RMII_SEL]			= 1,
+	[P_MII_SEL]			= 0,
+	[P_GMII_1GBIT]			= 1,
+	[P_GMII_NOT_1GBIT]		= 0,
 };
 
 static const u8 ksz8795_shifts[] = {
@@ -351,20 +370,42 @@ static const u16 ksz9477_regs[] = {
 	[S_START_CTRL]			= 0x0300,
 	[S_BROADCAST_CTRL]		= 0x0332,
 	[S_MULTICAST_CTRL]		= 0x0331,
+	[P_XMII_CTRL_0]			= 0x0300,
+	[P_XMII_CTRL_1]			= 0x0301,
 };
 
 static const u32 ksz9477_masks[] = {
 	[ALU_STAT_WRITE]		= 0,
 	[ALU_STAT_READ]			= 1,
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(3),
 };
 
 static const u8 ksz9477_shifts[] = {
 	[ALU_STAT_INDEX]		= 16,
 };
 
+static const u8 ksz9477_xmii_ctrl0[] = {
+	[P_MII_100MBIT]			= 1,
+	[P_MII_10MBIT]			= 0,
+	[P_MII_FULL_DUPLEX]		= 1,
+	[P_MII_HALF_DUPLEX]		= 0,
+};
+
+static const u8 ksz9477_xmii_ctrl1[] = {
+	[P_RGMII_SEL]			= 0,
+	[P_RMII_SEL]			= 1,
+	[P_GMII_SEL]			= 2,
+	[P_MII_SEL]			= 3,
+	[P_GMII_1GBIT]			= 0,
+	[P_GMII_NOT_1GBIT]		= 1,
+};
+
 static const u32 lan937x_masks[] = {
 	[ALU_STAT_WRITE]		= 1,
 	[ALU_STAT_READ]			= 2,
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(3),
 };
 
 static const u8 lan937x_shifts[] = {
@@ -388,6 +429,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz8795_regs,
 		.masks = ksz8795_masks,
 		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
 		.supports_mii = {false, false, false, false, true},
 		.supports_rmii = {false, false, false, false, true},
 		.supports_rgmii = {false, false, false, false, true},
@@ -424,6 +467,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz8795_regs,
 		.masks = ksz8795_masks,
 		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
 		.supports_mii = {false, false, false, false, true},
 		.supports_rmii = {false, false, false, false, true},
 		.supports_rgmii = {false, false, false, false, true},
@@ -446,6 +491,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz8795_regs,
 		.masks = ksz8795_masks,
 		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
 		.supports_mii = {false, false, false, false, true},
 		.supports_rmii = {false, false, false, false, true},
 		.supports_rgmii = {false, false, false, false, true},
@@ -488,6 +535,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = ksz9477_masks,
 		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   false, true, false},
 		.supports_rmii	= {false, false, false, false,
@@ -514,6 +563,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = ksz9477_masks,
 		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   false, true, true},
 		.supports_rmii	= {false, false, false, false,
@@ -539,6 +590,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = ksz9477_masks,
 		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
 		.supports_mii = {false, false, true},
 		.supports_rmii = {false, false, true},
 		.supports_rgmii = {false, false, true},
@@ -561,6 +614,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = ksz9477_masks,
 		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   false, true, true},
 		.supports_rmii	= {false, false, false, false,
@@ -586,6 +641,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = lan937x_masks,
 		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii = {false, false, false, false, true},
 		.supports_rmii = {false, false, false, false, true},
 		.supports_rgmii = {false, false, false, false, true},
@@ -607,6 +664,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = lan937x_masks,
 		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii = {false, false, false, false, true, true},
 		.supports_rmii = {false, false, false, false, true, true},
 		.supports_rgmii = {false, false, false, false, true, true},
@@ -628,6 +687,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = lan937x_masks,
 		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   true, true, false, false},
 		.supports_rmii	= {false, false, false, false,
@@ -653,6 +714,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = lan937x_masks,
 		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   true, true, false, false},
 		.supports_rmii	= {false, false, false, false,
@@ -678,6 +741,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.regs = ksz9477_regs,
 		.masks = lan937x_masks,
 		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
 		.supports_mii	= {false, false, false, false,
 				   true, true, false, false},
 		.supports_rmii	= {false, false, false, false,
@@ -1343,14 +1408,205 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
 	return dev->dev_ops->max_mtu(dev, port);
 }
 
+static void ksz_set_xmii(struct ksz_device *dev, int port,
+			 phy_interface_t interface)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	struct ksz_port *p = &dev->ports[port];
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
+		   P_RGMII_ID_EG_ENABLE);
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_MII:
+		data8 |= bitval[P_MII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		data8 |= bitval[P_RMII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		data8 |= bitval[P_GMII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		data8 |= bitval[P_RGMII_SEL];
+		/* On KSZ9893, disable RGMII in-band status support */
+		if (dev->features & IS_9893)
+			data8 &= ~P_MII_MAC_MODE;
+		break;
+	default:
+		dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
+			phy_modes(interface), port);
+		return;
+	}
+
+	if (p->rgmii_tx_val)
+		data8 |= P_RGMII_ID_EG_ENABLE;
+
+	if (p->rgmii_rx_val)
+		data8 |= P_RGMII_ID_IG_ENABLE;
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
+}
+
+phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	phy_interface_t interface;
+	u8 data8;
+	u8 val;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	val = FIELD_GET(P_MII_SEL_M, data8);
+
+	if (val == bitval[P_MII_SEL]) {
+		if (gbit)
+			interface = PHY_INTERFACE_MODE_GMII;
+		else
+			interface = PHY_INTERFACE_MODE_MII;
+	} else if (val == bitval[P_RMII_SEL]) {
+		interface = PHY_INTERFACE_MODE_RGMII;
+	} else {
+		interface = PHY_INTERFACE_MODE_RGMII;
+		if (data8 & P_RGMII_ID_EG_ENABLE)
+			interface = PHY_INTERFACE_MODE_RGMII_TXID;
+		if (data8 & P_RGMII_ID_IG_ENABLE) {
+			interface = PHY_INTERFACE_MODE_RGMII_RXID;
+			if (data8 & P_RGMII_ID_EG_ENABLE)
+				interface = PHY_INTERFACE_MODE_RGMII_ID;
+		}
+	}
+
+	return interface;
+}
+
 static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
 				   unsigned int mode,
 				   const struct phylink_link_state *state)
 {
 	struct ksz_device *dev = ds->priv;
 
+	if (ksz_is_ksz88x3(dev))
+		return;
+
+	/* Internal PHYs */
+	if (dev->info->internal_phy[port])
+		return;
+
+	if (phylink_autoneg_inband(mode)) {
+		dev_err(dev->dev, "In-band AN not supported!\n");
+		return;
+	}
+
+	ksz_set_xmii(dev, port, state->interface);
+
 	if (dev->dev_ops->phylink_mac_config)
 		dev->dev_ops->phylink_mac_config(dev, port, mode, state);
+
+	if (dev->dev_ops->setup_rgmii_delay)
+		dev->dev_ops->setup_rgmii_delay(dev, port);
+}
+
+bool ksz_get_gbit(struct ksz_device *dev, int port)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	bool gbit = false;
+	u8 data8;
+	bool val;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	val = FIELD_GET(P_GMII_1GBIT_M, data8);
+
+	if (val == bitval[P_GMII_1GBIT])
+		gbit = true;
+
+	return gbit;
+}
+
+static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	data8 &= ~P_GMII_1GBIT_M;
+
+	if (gbit)
+		data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]);
+	else
+		data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]);
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
+}
+
+static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
+{
+	const u8 *bitval = dev->info->xmii_ctrl0;
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
+
+	data8 &= ~P_MII_100MBIT_M;
+
+	if (speed == SPEED_100)
+		data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
+	else
+		data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
+}
+
+static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
+{
+	if (speed == SPEED_1000)
+		ksz_set_gbit(dev, port, true);
+	else
+		ksz_set_gbit(dev, port, false);
+
+	if (speed == SPEED_100 || speed == SPEED_10)
+		ksz_set_100_10mbit(dev, port, speed);
+}
+
+static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
+				bool tx_pause, bool rx_pause)
+{
+	const u8 *bitval = dev->info->xmii_ctrl0;
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+	u8 mask;
+	u8 val;
+
+	mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
+	       masks[P_MII_RX_FLOW_CTRL];
+
+	if (duplex == DUPLEX_FULL)
+		val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
+	else
+		val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
+
+	if (tx_pause)
+		val |= masks[P_MII_TX_FLOW_CTRL];
+
+	if (rx_pause)
+		val |= masks[P_MII_RX_FLOW_CTRL];
+
+	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
 }
 
 static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -1360,6 +1616,19 @@ static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
 				    int duplex, bool tx_pause, bool rx_pause)
 {
 	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+
+	p = &dev->ports[port];
+
+	/* Internal PHYs */
+	if (dev->info->internal_phy[port])
+		return;
+
+	p->phydev.speed = speed;
+
+	ksz_port_set_xmii_speed(dev, port, speed);
+
+	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
 
 	if (dev->dev_ops->phylink_mac_link_up)
 		dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
@@ -1494,6 +1763,43 @@ struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
 }
 EXPORT_SYMBOL(ksz_switch_alloc);
 
+static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
+				  struct device_node *port_dn)
+{
+	phy_interface_t phy_mode = dev->ports[port_num].interface;
+	int rx_delay = -1, tx_delay = -1;
+
+	if (!phy_interface_mode_is_rgmii(phy_mode))
+		return;
+
+	of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
+	of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
+
+	if (rx_delay == -1 && tx_delay == -1) {
+		dev_warn(dev->dev,
+			 "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, "
+			 "please update device tree to specify \"rx-internal-delay-ps\" and "
+			 "\"tx-internal-delay-ps\"",
+			 port_num);
+
+		if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
+		    phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = 2000;
+
+		if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+		    phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
+			tx_delay = 2000;
+	}
+
+	if (rx_delay < 0)
+		rx_delay = 0;
+	if (tx_delay < 0)
+		tx_delay = 0;
+
+	dev->ports[port_num].rgmii_rx_val = rx_delay;
+	dev->ports[port_num].rgmii_tx_val = tx_delay;
+}
+
 int ksz_switch_register(struct ksz_device *dev)
 {
 	const struct ksz_chip_data *info;
@@ -1591,6 +1897,8 @@ int ksz_switch_register(struct ksz_device *dev)
 				}
 				of_get_phy_mode(port,
 						&dev->ports[port_num].interface);
+
+				ksz_parse_rgmii_delay(dev, port_num, port);
 			}
 			of_node_put(ports);
 		}
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index d5dddb7ec045..764ada3a0f42 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -51,6 +51,8 @@ struct ksz_chip_data {
 	const u16 *regs;
 	const u32 *masks;
 	const u8 *shifts;
+	const u8 *xmii_ctrl0;
+	const u8 *xmii_ctrl1;
 	int stp_ctrl_reg;
 	int broadcast_ctrl_reg;
 	int multicast_ctrl_reg;
@@ -77,6 +79,8 @@ struct ksz_port {
 	struct ksz_port_mib mib;
 	phy_interface_t interface;
 	u16 max_frame;
+	u32 rgmii_tx_val;
+	u32 rgmii_rx_val;
 };
 
 struct ksz_device {
@@ -169,6 +173,8 @@ enum ksz_regs {
 	S_START_CTRL,
 	S_BROADCAST_CTRL,
 	S_MULTICAST_CTRL,
+	P_XMII_CTRL_0,
+	P_XMII_CTRL_1,
 };
 
 enum ksz_masks {
@@ -193,6 +199,8 @@ enum ksz_masks {
 	DYNAMIC_MAC_TABLE_TIMESTAMP,
 	ALU_STAT_WRITE,
 	ALU_STAT_READ,
+	P_MII_TX_FLOW_CTRL,
+	P_MII_RX_FLOW_CTRL,
 };
 
 enum ksz_shifts {
@@ -208,6 +216,22 @@ enum ksz_shifts {
 	ALU_STAT_INDEX,
 };
 
+enum ksz_xmii_ctrl0 {
+	P_MII_100MBIT,
+	P_MII_10MBIT,
+	P_MII_FULL_DUPLEX,
+	P_MII_HALF_DUPLEX,
+};
+
+enum ksz_xmii_ctrl1 {
+	P_RGMII_SEL,
+	P_RMII_SEL,
+	P_GMII_SEL,
+	P_MII_SEL,
+	P_GMII_1GBIT,
+	P_GMII_NOT_1GBIT,
+};
+
 struct alu_struct {
 	/* entry 1 */
 	u8	is_static:1;
@@ -279,6 +303,7 @@ struct ksz_dev_ops {
 				    phy_interface_t interface,
 				    struct phy_device *phydev, int speed,
 				    int duplex, bool tx_pause, bool rx_pause);
+	void (*setup_rgmii_delay)(struct ksz_device *dev, int port);
 	void (*config_cpu_port)(struct dsa_switch *ds);
 	int (*enable_stp_addr)(struct ksz_device *dev);
 	int (*reset)(struct ksz_device *dev);
@@ -293,6 +318,8 @@ void ksz_switch_remove(struct ksz_device *dev);
 void ksz_init_mib_timer(struct ksz_device *dev);
 void ksz_r_mib_stats64(struct ksz_device *dev, int port);
 void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
+bool ksz_get_gbit(struct ksz_device *dev, int port);
+phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
 extern const struct ksz_chip_data ksz_switch_chips[];
 
 /* Common register access functions */
@@ -399,6 +426,14 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
 	ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data);
 }
 
+static inline void ksz_prmw8(struct ksz_device *dev, int port, int offset,
+			     u8 mask, u8 val)
+{
+	regmap_update_bits(dev->regmap[0],
+			   dev->dev_ops->get_port_addr(port, offset),
+			   mask, val);
+}
+
 static inline void ksz_regmap_lock(void *__mtx)
 {
 	struct mutex *mtx = __mtx;
@@ -411,6 +446,11 @@ static inline void ksz_regmap_unlock(void *__mtx)
 	mutex_unlock(mtx);
 }
 
+static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
+{
+	return dev->chip_id == KSZ8830_CHIP_ID;
+}
+
 static inline int is_lan937x(struct ksz_device *dev)
 {
 	return dev->chip_id == LAN9370_CHIP_ID ||
@@ -456,6 +496,20 @@ static inline int is_lan937x(struct ksz_device *dev)
 
 #define SW_START			0x01
 
+/* Used with variable features to indicate capabilities. */
+#define GBIT_SUPPORT			BIT(0)
+#define IS_9893				BIT(2)
+
+/* xMII configuration */
+#define P_MII_DUPLEX_M			BIT(6)
+#define P_MII_100MBIT_M			BIT(4)
+
+#define P_GMII_1GBIT_M			BIT(6)
+#define P_RGMII_ID_IG_ENABLE		BIT(4)
+#define P_RGMII_ID_EG_ENABLE		BIT(3)
+#define P_MII_MAC_MODE			BIT(2)
+#define P_MII_SEL_M			0x3
+
 /* Regmap tables generation */
 #define KSZ_SPI_OP_RD		3
 #define KSZ_SPI_OP_WR		2
diff --git a/drivers/net/dsa/microchip/lan937x.h b/drivers/net/dsa/microchip/lan937x.h
index 72ba9cb2fbc6..4e0b1dccec27 100644
--- a/drivers/net/dsa/microchip/lan937x.h
+++ b/drivers/net/dsa/microchip/lan937x.h
@@ -17,11 +17,5 @@ void lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
 int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu);
 void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
 			      struct phylink_config *config);
-void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
-				 unsigned int mode, phy_interface_t interface,
-				 struct phy_device *phydev, int speed,
-				 int duplex, bool tx_pause, bool rx_pause);
-void lan937x_phylink_mac_config(struct ksz_device *dev, int port,
-				unsigned int mode,
-				const struct phylink_link_state *state);
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port);
 #endif
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index c29d175ca6f7..daedd2bf20c1 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -234,6 +234,8 @@ int lan937x_reset_switch(struct ksz_device *dev)
 
 void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
 	struct dsa_switch *ds = dev->ds;
 	u8 member;
 
@@ -254,8 +256,9 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
 
 	if (!dev->info->internal_phy[port])
-		lan937x_port_cfg(dev, port, REG_PORT_XMII_CTRL_0,
-				 PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL,
+		lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0],
+				 masks[P_MII_TX_FLOW_CTRL] |
+				 masks[P_MII_RX_FLOW_CTRL],
 				 true);
 
 	if (cpu_port)
@@ -312,75 +315,43 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
 	return 0;
 }
 
-static void lan937x_config_gbit(struct ksz_device *dev, bool gbit, u8 *data)
+static void lan937x_set_tune_adj(struct ksz_device *dev, int port,
+				 u16 reg, u8 val)
 {
-	if (gbit)
-		*data &= ~PORT_MII_NOT_1GBIT;
-	else
-		*data |= PORT_MII_NOT_1GBIT;
-}
+	u16 data16;
 
-static void lan937x_mac_config(struct ksz_device *dev, int port,
-			       phy_interface_t interface)
-{
-	u8 data8;
-
-	ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-
-	/* clear MII selection & set it based on interface later */
-	data8 &= ~PORT_MII_SEL_M;
-
-	/* configure MAC based on interface */
-	switch (interface) {
-	case PHY_INTERFACE_MODE_MII:
-		lan937x_config_gbit(dev, false, &data8);
-		data8 |= PORT_MII_SEL;
-		break;
-	case PHY_INTERFACE_MODE_RMII:
-		lan937x_config_gbit(dev, false, &data8);
-		data8 |= PORT_RMII_SEL;
-		break;
-	default:
-		dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
-			phy_modes(interface), port);
-		return;
-	}
+	ksz_pread16(dev, port, reg, &data16);
 
-	/* Write the updated value */
-	ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+	/* Update tune Adjust */
+	data16 |= FIELD_PREP(PORT_TUNE_ADJ, val);
+	ksz_pwrite16(dev, port, reg, data16);
+
+	/* write DLL reset to take effect */
+	data16 |= PORT_DLL_RESET;
+	ksz_pwrite16(dev, port, reg, data16);
 }
 
-static void lan937x_config_interface(struct ksz_device *dev, int port,
-				     int speed, int duplex,
-				     bool tx_pause, bool rx_pause)
+static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port)
 {
-	u8 xmii_ctrl0, xmii_ctrl1;
-
-	ksz_pread8(dev, port, REG_PORT_XMII_CTRL_0, &xmii_ctrl0);
-	ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &xmii_ctrl1);
-
-	xmii_ctrl0 &= ~(PORT_MII_100MBIT | PORT_MII_FULL_DUPLEX |
-			PORT_MII_TX_FLOW_CTRL | PORT_MII_RX_FLOW_CTRL);
-
-	if (speed == SPEED_1000)
-		lan937x_config_gbit(dev, true, &xmii_ctrl1);
-	else
-		lan937x_config_gbit(dev, false, &xmii_ctrl1);
+	u8 val;
 
-	if (speed == SPEED_100)
-		xmii_ctrl0 |= PORT_MII_100MBIT;
+	/* Apply different codes based on the ports as per characterization
+	 * results
+	 */
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS :
+		RGMII_2_TX_DELAY_2NS;
 
-	if (duplex)
-		xmii_ctrl0 |= PORT_MII_FULL_DUPLEX;
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val);
+}
 
-	if (tx_pause)
-		xmii_ctrl0 |= PORT_MII_TX_FLOW_CTRL;
+static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
 
-	if (rx_pause)
-		xmii_ctrl0 |= PORT_MII_RX_FLOW_CTRL;
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS :
+		RGMII_2_RX_DELAY_2NS;
 
-	ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_0, xmii_ctrl0);
-	ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, xmii_ctrl1);
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val);
 }
 
 void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
@@ -395,33 +366,21 @@ void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
 	}
 }
 
-void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
-				 unsigned int mode, phy_interface_t interface,
-				 struct phy_device *phydev, int speed,
-				 int duplex, bool tx_pause, bool rx_pause)
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
 {
-	/* Internal PHYs */
-	if (dev->info->internal_phy[port])
-		return;
+	struct ksz_port *p = &dev->ports[port];
 
-	lan937x_config_interface(dev, port, speed, duplex,
-				 tx_pause, rx_pause);
-}
-
-void lan937x_phylink_mac_config(struct ksz_device *dev, int port,
-				unsigned int mode,
-				const struct phylink_link_state *state)
-{
-	/* Internal PHYs */
-	if (dev->info->internal_phy[port])
-		return;
-
-	if (phylink_autoneg_inband(mode)) {
-		dev_err(dev->dev, "In-band AN not supported!\n");
-		return;
+	if (p->rgmii_tx_val) {
+		lan937x_set_rgmii_tx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n",
+			 port);
 	}
 
-	lan937x_mac_config(dev, port, state->interface);
+	if (p->rgmii_rx_val) {
+		lan937x_set_rgmii_rx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n",
+			 port);
+	}
 }
 
 int lan937x_setup(struct dsa_switch *ds)
diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h
index c187d0a3e7fa..ba4adaddb3ec 100644
--- a/drivers/net/dsa/microchip/lan937x_reg.h
+++ b/drivers/net/dsa/microchip/lan937x_reg.h
@@ -131,24 +131,16 @@
 #define REG_PORT_T1_PHY_CTRL_BASE	0x0100
 
 /* 3 - xMII */
-#define REG_PORT_XMII_CTRL_0		0x0300
 #define PORT_SGMII_SEL			BIT(7)
-#define PORT_MII_FULL_DUPLEX		BIT(6)
-#define PORT_MII_TX_FLOW_CTRL		BIT(5)
-#define PORT_MII_100MBIT		BIT(4)
-#define PORT_MII_RX_FLOW_CTRL		BIT(3)
 #define PORT_GRXC_ENABLE		BIT(0)
 
-#define REG_PORT_XMII_CTRL_1		0x0301
-#define PORT_MII_NOT_1GBIT		BIT(6)
 #define PORT_MII_SEL_EDGE		BIT(5)
-#define PORT_RGMII_ID_IG_ENABLE		BIT(4)
-#define PORT_RGMII_ID_EG_ENABLE		BIT(3)
-#define PORT_MII_MAC_MODE		BIT(2)
-#define PORT_MII_SEL_M			0x3
-#define PORT_RGMII_SEL			0x0
-#define PORT_RMII_SEL			0x1
-#define PORT_MII_SEL			0x2
+
+#define REG_PORT_XMII_CTRL_4		0x0304
+#define REG_PORT_XMII_CTRL_5		0x0306
+
+#define PORT_DLL_RESET			BIT(15)
+#define PORT_TUNE_ADJ			GENMASK(13, 7)
 
 /* 4 - MAC */
 #define REG_PORT_MAC_CTRL_0		0x0400
@@ -175,6 +167,18 @@
 
 #define P_PRIO_CTRL			REG_PORT_MRI_PRIO_CTRL
 
+/* The port number as per the datasheet */
+#define RGMII_2_PORT_NUM		5
+#define RGMII_1_PORT_NUM		6
+
+#define LAN937X_RGMII_2_PORT		(RGMII_2_PORT_NUM - 1)
+#define LAN937X_RGMII_1_PORT		(RGMII_1_PORT_NUM - 1)
+
+#define RGMII_1_TX_DELAY_2NS		2
+#define RGMII_2_TX_DELAY_2NS		0
+#define RGMII_1_RX_DELAY_2NS		0x1B
+#define RGMII_2_RX_DELAY_2NS		0x14
+
 #define LAN937X_TAG_LEN			2
 
 #endif