MIPS: Alchemy: au1000.h move C-code after register definitions.

Move the C-code after all macros:  A follow-on patch which
introduces helpers to access the SYS_* registers needs this to build.

Just code shuffling, no functional changes.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 622 insertions, 618 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index e50671019122..16cd01236dc3 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -34,6 +34,607 @@
 #ifndef _AU1000_H_
 #define _AU1000_H_
 
+/* SOC Interrupt numbers */
+/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR		AU1000_INTC1_INT_LAST
+
+/* Au1300-style (GPIC): 1 controller with up to 128 sources */
+#define ALCHEMY_GPIC_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define ALCHEMY_GPIC_INT_NUM	128
+#define ALCHEMY_GPIC_INT_LAST	(ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
+
+
+/* Au1300 peripheral interrupt numbers */
+#define AU1300_FIRST_INT	(ALCHEMY_GPIC_INT_BASE)
+#define AU1300_UART1_INT	(AU1300_FIRST_INT + 17)
+#define AU1300_UART2_INT	(AU1300_FIRST_INT + 25)
+#define AU1300_UART3_INT	(AU1300_FIRST_INT + 27)
+#define AU1300_SD1_INT		(AU1300_FIRST_INT + 32)
+#define AU1300_SD2_INT		(AU1300_FIRST_INT + 38)
+#define AU1300_PSC0_INT		(AU1300_FIRST_INT + 48)
+#define AU1300_PSC1_INT		(AU1300_FIRST_INT + 52)
+#define AU1300_PSC2_INT		(AU1300_FIRST_INT + 56)
+#define AU1300_PSC3_INT		(AU1300_FIRST_INT + 60)
+#define AU1300_NAND_INT		(AU1300_FIRST_INT + 62)
+#define AU1300_DDMA_INT		(AU1300_FIRST_INT + 75)
+#define AU1300_MMU_INT		(AU1300_FIRST_INT + 76)
+#define AU1300_MPU_INT		(AU1300_FIRST_INT + 77)
+#define AU1300_GPU_INT		(AU1300_FIRST_INT + 78)
+#define AU1300_UDMA_INT		(AU1300_FIRST_INT + 79)
+#define AU1300_TOY_INT		(AU1300_FIRST_INT + 80)
+#define AU1300_TOY_MATCH0_INT	(AU1300_FIRST_INT + 81)
+#define AU1300_TOY_MATCH1_INT	(AU1300_FIRST_INT + 82)
+#define AU1300_TOY_MATCH2_INT	(AU1300_FIRST_INT + 83)
+#define AU1300_RTC_INT		(AU1300_FIRST_INT + 84)
+#define AU1300_RTC_MATCH0_INT	(AU1300_FIRST_INT + 85)
+#define AU1300_RTC_MATCH1_INT	(AU1300_FIRST_INT + 86)
+#define AU1300_RTC_MATCH2_INT	(AU1300_FIRST_INT + 87)
+#define AU1300_UART0_INT	(AU1300_FIRST_INT + 88)
+#define AU1300_SD0_INT		(AU1300_FIRST_INT + 89)
+#define AU1300_USB_INT		(AU1300_FIRST_INT + 90)
+#define AU1300_LCD_INT		(AU1300_FIRST_INT + 91)
+#define AU1300_BSA_INT		(AU1300_FIRST_INT + 92)
+#define AU1300_MPE_INT		(AU1300_FIRST_INT + 93)
+#define AU1300_ITE_INT		(AU1300_FIRST_INT + 94)
+#define AU1300_AES_INT		(AU1300_FIRST_INT + 95)
+#define AU1300_CIM_INT		(AU1300_FIRST_INT + 96)
+
+/**********************************************************************/
+
+/*
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
+ */
+
+#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
+#define AU1300_ROM_PHYS_ADDR		0x10000000 /* 5 */
+#define AU1300_OTP_PHYS_ADDR		0x10002000 /* 5 */
+#define AU1300_VSS_PHYS_ADDR		0x10003000 /* 5 */
+#define AU1300_UART0_PHYS_ADDR		0x10100000 /* 5 */
+#define AU1300_UART1_PHYS_ADDR		0x10101000 /* 5 */
+#define AU1300_UART2_PHYS_ADDR		0x10102000 /* 5 */
+#define AU1300_UART3_PHYS_ADDR		0x10103000 /* 5 */
+#define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
+#define AU1300_GPIC_PHYS_ADDR		0x10200000 /* 5 */
+#define AU1000_IRDA_PHYS_ADDR		0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR		0x10300000 /* 45 */
+#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
+#define AU1300_GPU_PHYS_ADDR		0x10500000 /* 5 */
+#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 245 */
+#define AU1300_SD1_PHYS_ADDR		0x10601000 /* 5 */
+#define AU1300_SD2_PHYS_ADDR		0x10602000 /* 5 */
+#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
+#define AU1300_SYS_PHYS_ADDR		0x10900000 /* 5 */
+#define AU1550_PSC2_PHYS_ADDR		0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR		0x10B00000 /* 3 */
+#define AU1300_PSC0_PHYS_ADDR		0x10A00000 /* 5 */
+#define AU1300_PSC1_PHYS_ADDR		0x10A01000 /* 5 */
+#define AU1300_PSC2_PHYS_ADDR		0x10A02000 /* 5 */
+#define AU1300_PSC3_PHYS_ADDR		0x10A03000 /* 5 */
+#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR		0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR		0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR		0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 012345 */
+#define AU1550_PSC0_PHYS_ADDR		0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR		0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR		0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR	0x14001000 /* 01234 */
+#define AU1300_UDMA_PHYS_ADDR		0x14001800 /* 5 */
+#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 345 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 345 */
+#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 45 */
+#define AU1500_PCI_PHYS_ADDR		0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR		0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR		0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR		0x14012000 /* 4 */
+#define AU1300_MAEITE_PHYS_ADDR		0x14010000 /* 5 */
+#define AU1300_MAEMPE_PHYS_ADDR		0x14014000 /* 5 */
+#define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
+#define AU1300_USB_EHCI_PHYS_ADDR	0x14020000 /* 5 */
+#define AU1300_USB_OHCI0_PHYS_ADDR	0x14020400 /* 5 */
+#define AU1300_USB_OHCI1_PHYS_ADDR	0x14020800 /* 5 */
+#define AU1300_USB_CTL_PHYS_ADDR	0x14021000 /* 5 */
+#define AU1300_USB_OTG_PHYS_ADDR	0x14022000 /* 5 */
+#define AU1300_MAEBSA_PHYS_ADDR		0x14030000 /* 5 */
+#define AU1100_LCD_PHYS_ADDR		0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 45 */
+#define AU1500_PCI_MEM_PHYS_ADDR	0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR		0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR	0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR	0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 012345 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 012345 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 012345 */
+
+/**********************************************************************/
+
+
+/*
+ * Au1300 GPIO+INT controller (GPIC) register offsets and bits
+ * Registers are 128bits (0x10 bytes), divided into 4 "banks".
+ */
+#define AU1300_GPIC_PINVAL	0x0000
+#define AU1300_GPIC_PINVALCLR	0x0010
+#define AU1300_GPIC_IPEND	0x0020
+#define AU1300_GPIC_PRIENC	0x0030
+#define AU1300_GPIC_IEN		0x0040	/* int_mask in manual */
+#define AU1300_GPIC_IDIS	0x0050	/* int_maskclr in manual */
+#define AU1300_GPIC_DMASEL	0x0060
+#define AU1300_GPIC_DEVSEL	0x0080
+#define AU1300_GPIC_DEVCLR	0x0090
+#define AU1300_GPIC_RSTVAL	0x00a0
+/* pin configuration space. one 32bit register for up to 128 IRQs */
+#define AU1300_GPIC_PINCFG	0x1000
+
+#define GPIC_GPIO_TO_BIT(gpio)	\
+	(1 << ((gpio) & 0x1f))
+
+#define GPIC_GPIO_BANKOFF(gpio) \
+	(((gpio) >> 5) * 4)
+
+/* Pin Control bits: who owns the pin, what does it do */
+#define GPIC_CFG_PC_GPIN		0
+#define GPIC_CFG_PC_DEV			1
+#define GPIC_CFG_PC_GPOLOW		2
+#define GPIC_CFG_PC_GPOHIGH		3
+#define GPIC_CFG_PC_MASK		3
+
+/* assign pin to MIPS IRQ line */
+#define GPIC_CFG_IL_SET(x)	(((x) & 3) << 2)
+#define GPIC_CFG_IL_MASK	(3 << 2)
+
+/* pin interrupt type setup */
+#define GPIC_CFG_IC_OFF		(0 << 4)
+#define GPIC_CFG_IC_LEVEL_LOW	(1 << 4)
+#define GPIC_CFG_IC_LEVEL_HIGH	(2 << 4)
+#define GPIC_CFG_IC_EDGE_FALL	(5 << 4)
+#define GPIC_CFG_IC_EDGE_RISE	(6 << 4)
+#define GPIC_CFG_IC_EDGE_BOTH	(7 << 4)
+#define GPIC_CFG_IC_MASK	(7 << 4)
+
+/* allow interrupt to wake cpu from 'wait' */
+#define GPIC_CFG_IDLEWAKE	(1 << 7)
+
+/***********************************************************************/
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0		0x0000
+#define AU1000_MEM_SDMODE1		0x0004
+#define AU1000_MEM_SDMODE2		0x0008
+#define AU1000_MEM_SDADDR0		0x000C
+#define AU1000_MEM_SDADDR1		0x0010
+#define AU1000_MEM_SDADDR2		0x0014
+#define AU1000_MEM_SDREFCFG		0x0018
+#define AU1000_MEM_SDPRECMD		0x001C
+#define AU1000_MEM_SDAUTOREF		0x0020
+#define AU1000_MEM_SDWRMD0		0x0024
+#define AU1000_MEM_SDWRMD1		0x0028
+#define AU1000_MEM_SDWRMD2		0x002C
+#define AU1000_MEM_SDSLEEP		0x0030
+#define AU1000_MEM_SDSMCKE		0x0034
+
+/* MEM_SDMODE register content definitions */
+#define MEM_SDMODE_F		(1 << 22)
+#define MEM_SDMODE_SR		(1 << 21)
+#define MEM_SDMODE_BS		(1 << 20)
+#define MEM_SDMODE_RS		(3 << 18)
+#define MEM_SDMODE_CS		(7 << 15)
+#define MEM_SDMODE_TRAS		(15 << 11)
+#define MEM_SDMODE_TMRD		(3 << 9)
+#define MEM_SDMODE_TWR		(3 << 7)
+#define MEM_SDMODE_TRP		(3 << 5)
+#define MEM_SDMODE_TRCD		(3 << 3)
+#define MEM_SDMODE_TCL		(7 << 0)
+
+#define MEM_SDMODE_BS_2Bank	(0 << 20)
+#define MEM_SDMODE_BS_4Bank	(1 << 20)
+#define MEM_SDMODE_RS_11Row	(0 << 18)
+#define MEM_SDMODE_RS_12Row	(1 << 18)
+#define MEM_SDMODE_RS_13Row	(2 << 18)
+#define MEM_SDMODE_RS_N(N)	((N) << 18)
+#define MEM_SDMODE_CS_7Col	(0 << 15)
+#define MEM_SDMODE_CS_8Col	(1 << 15)
+#define MEM_SDMODE_CS_9Col	(2 << 15)
+#define MEM_SDMODE_CS_10Col	(3 << 15)
+#define MEM_SDMODE_CS_11Col	(4 << 15)
+#define MEM_SDMODE_CS_N(N)	((N) << 15)
+#define MEM_SDMODE_TRAS_N(N)	((N) << 11)
+#define MEM_SDMODE_TMRD_N(N)	((N) << 9)
+#define MEM_SDMODE_TWR_N(N)	((N) << 7)
+#define MEM_SDMODE_TRP_N(N)	((N) << 5)
+#define MEM_SDMODE_TRCD_N(N)	((N) << 3)
+#define MEM_SDMODE_TCL_N(N)	((N) << 0)
+
+/* MEM_SDADDR register contents definitions */
+#define MEM_SDADDR_E		(1 << 20)
+#define MEM_SDADDR_CSBA		(0x03FF << 10)
+#define MEM_SDADDR_CSMASK	(0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
+
+/* MEM_SDREFCFG register content definitions */
+#define MEM_SDREFCFG_TRC	(15 << 28)
+#define MEM_SDREFCFG_TRPM	(3 << 26)
+#define MEM_SDREFCFG_E		(1 << 25)
+#define MEM_SDREFCFG_RE		(0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N)	(N)
+
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0		0x0800
+#define AU1550_MEM_SDMODE1		0x0808
+#define AU1550_MEM_SDMODE2		0x0810
+#define AU1550_MEM_SDADDR0		0x0820
+#define AU1550_MEM_SDADDR1		0x0828
+#define AU1550_MEM_SDADDR2		0x0830
+#define AU1550_MEM_SDCONFIGA		0x0840
+#define AU1550_MEM_SDCONFIGB		0x0848
+#define AU1550_MEM_SDSTAT		0x0850
+#define AU1550_MEM_SDERRADDR		0x0858
+#define AU1550_MEM_SDSTRIDE0		0x0860
+#define AU1550_MEM_SDSTRIDE1		0x0868
+#define AU1550_MEM_SDSTRIDE2		0x0870
+#define AU1550_MEM_SDWRMD0		0x0880
+#define AU1550_MEM_SDWRMD1		0x0888
+#define AU1550_MEM_SDWRMD2		0x0890
+#define AU1550_MEM_SDPRECMD		0x08C0
+#define AU1550_MEM_SDAUTOREF		0x08C8
+#define AU1550_MEM_SDSREF		0x08D0
+#define AU1550_MEM_SDSLEEP		MEM_SDSREF
+
+/* Static Bus Controller */
+#define MEM_STCFG0		0xB4001000
+#define MEM_STTIME0		0xB4001004
+#define MEM_STADDR0		0xB4001008
+
+#define MEM_STCFG1		0xB4001010
+#define MEM_STTIME1		0xB4001014
+#define MEM_STADDR1		0xB4001018
+
+#define MEM_STCFG2		0xB4001020
+#define MEM_STTIME2		0xB4001024
+#define MEM_STADDR2		0xB4001028
+
+#define MEM_STCFG3		0xB4001030
+#define MEM_STTIME3		0xB4001034
+#define MEM_STADDR3		0xB4001038
+
+#define MEM_STNDCTL		0xB4001100
+#define MEM_STSTAT		0xB4001104
+
+#define MEM_STNAND_CMD		0x0
+#define MEM_STNAND_ADDR		0x4
+#define MEM_STNAND_DATA		0x20
+
+
+/* Programmable Counters 0 and 1 */
+#define SYS_BASE		0xB1900000
+#define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
+#  define SYS_CNTRL_E1S		(1 << 23)
+#  define SYS_CNTRL_T1S		(1 << 20)
+#  define SYS_CNTRL_M21		(1 << 19)
+#  define SYS_CNTRL_M11		(1 << 18)
+#  define SYS_CNTRL_M01		(1 << 17)
+#  define SYS_CNTRL_C1S		(1 << 16)
+#  define SYS_CNTRL_BP		(1 << 14)
+#  define SYS_CNTRL_EN1		(1 << 13)
+#  define SYS_CNTRL_BT1		(1 << 12)
+#  define SYS_CNTRL_EN0		(1 << 11)
+#  define SYS_CNTRL_BT0		(1 << 10)
+#  define SYS_CNTRL_E0		(1 << 8)
+#  define SYS_CNTRL_E0S		(1 << 7)
+#  define SYS_CNTRL_32S		(1 << 5)
+#  define SYS_CNTRL_T0S		(1 << 4)
+#  define SYS_CNTRL_M20		(1 << 3)
+#  define SYS_CNTRL_M10		(1 << 2)
+#  define SYS_CNTRL_M00		(1 << 1)
+#  define SYS_CNTRL_C0S		(1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM		(SYS_BASE + 0)
+#define SYS_TOYWRITE		(SYS_BASE + 4)
+#define SYS_TOYMATCH0		(SYS_BASE + 8)
+#define SYS_TOYMATCH1		(SYS_BASE + 0xC)
+#define SYS_TOYMATCH2		(SYS_BASE + 0x10)
+#define SYS_TOYREAD		(SYS_BASE + 0x40)
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM		(SYS_BASE + 0x44)
+#define SYS_RTCWRITE		(SYS_BASE + 0x48)
+#define SYS_RTCMATCH0		(SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1		(SYS_BASE + 0x50)
+#define SYS_RTCMATCH2		(SYS_BASE + 0x54)
+#define SYS_RTCREAD		(SYS_BASE + 0x58)
+
+
+/* GPIO */
+#define SYS_PINFUNC		0xB190002C
+#  define SYS_PF_USB		(1 << 15)	/* 2nd USB device/host */
+#  define SYS_PF_U3		(1 << 14)	/* GPIO23/U3TXD */
+#  define SYS_PF_U2		(1 << 13)	/* GPIO22/U2TXD */
+#  define SYS_PF_U1		(1 << 12)	/* GPIO21/U1TXD */
+#  define SYS_PF_SRC		(1 << 11)	/* GPIO6/SROMCKE */
+#  define SYS_PF_CK5		(1 << 10)	/* GPIO3/CLK5 */
+#  define SYS_PF_CK4		(1 << 9)	/* GPIO2/CLK4 */
+#  define SYS_PF_IRF		(1 << 8)	/* GPIO15/IRFIRSEL */
+#  define SYS_PF_UR3		(1 << 7)	/* GPIO[14:9]/UART3 */
+#  define SYS_PF_I2D		(1 << 6)	/* GPIO8/I2SDI */
+#  define SYS_PF_I2S		(1 << 5)	/* I2S/GPIO[29:31] */
+#  define SYS_PF_NI2		(1 << 4)	/* NI2/GPIO[24:28] */
+#  define SYS_PF_U0		(1 << 3)	/* U0TXD/GPIO20 */
+#  define SYS_PF_RD		(1 << 2)	/* IRTXD/GPIO19 */
+#  define SYS_PF_A97		(1 << 1)	/* AC97/SSL1 */
+#  define SYS_PF_S0		(1 << 0)	/* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+#  define SYS_PF_PC		(1 << 18)	/* PCMCIA/GPIO[207:204] */
+#  define SYS_PF_LCD		(1 << 17)	/* extern lcd/GPIO[203:200] */
+#  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
+#  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
+
+/* Au1550 only.	 Redefines lots of pins */
+#  define SYS_PF_PSC2_MASK	(7 << 17)
+#  define SYS_PF_PSC2_AC97	0
+#  define SYS_PF_PSC2_SPI	0
+#  define SYS_PF_PSC2_I2S	(1 << 17)
+#  define SYS_PF_PSC2_SMBUS	(3 << 17)
+#  define SYS_PF_PSC2_GPIO	(7 << 17)
+#  define SYS_PF_PSC3_MASK	(7 << 20)
+#  define SYS_PF_PSC3_AC97	0
+#  define SYS_PF_PSC3_SPI	0
+#  define SYS_PF_PSC3_I2S	(1 << 20)
+#  define SYS_PF_PSC3_SMBUS	(3 << 20)
+#  define SYS_PF_PSC3_GPIO	(7 << 20)
+#  define SYS_PF_PSC1_S1	(1 << 1)
+#  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#define SYS_PINFUNC_DMA		(1 << 31)
+#define SYS_PINFUNC_S0A		(1 << 30)
+#define SYS_PINFUNC_S1A		(1 << 29)
+#define SYS_PINFUNC_LP0		(1 << 28)
+#define SYS_PINFUNC_LP1		(1 << 27)
+#define SYS_PINFUNC_LD16	(1 << 26)
+#define SYS_PINFUNC_LD8		(1 << 25)
+#define SYS_PINFUNC_LD1		(1 << 24)
+#define SYS_PINFUNC_LD0		(1 << 23)
+#define SYS_PINFUNC_P1A		(3 << 21)
+#define SYS_PINFUNC_P1B		(1 << 20)
+#define SYS_PINFUNC_FS3		(1 << 19)
+#define SYS_PINFUNC_P0A		(3 << 17)
+#define SYS_PINFUNC_CS		(1 << 16)
+#define SYS_PINFUNC_CIM		(1 << 15)
+#define SYS_PINFUNC_P1C		(1 << 14)
+#define SYS_PINFUNC_U1T		(1 << 12)
+#define SYS_PINFUNC_U1R		(1 << 11)
+#define SYS_PINFUNC_EX1		(1 << 10)
+#define SYS_PINFUNC_EX0		(1 << 9)
+#define SYS_PINFUNC_U0R		(1 << 8)
+#define SYS_PINFUNC_MC		(1 << 7)
+#define SYS_PINFUNC_S0B		(1 << 6)
+#define SYS_PINFUNC_S0C		(1 << 5)
+#define SYS_PINFUNC_P0B		(1 << 4)
+#define SYS_PINFUNC_U0T		(1 << 3)
+#define SYS_PINFUNC_S1B		(1 << 2)
+
+/* Power Management */
+#define SYS_SCRATCH0		0xB1900018
+#define SYS_SCRATCH1		0xB190001C
+#define SYS_WAKEMSK		0xB1900034
+#define SYS_ENDIAN		0xB1900038
+#define SYS_POWERCTRL		0xB190003C
+#define SYS_WAKESRC		0xB190005C
+#define SYS_SLPPWR		0xB1900078
+#define SYS_SLEEP		0xB190007C
+
+#define SYS_WAKEMSK_D2		(1 << 9)
+#define SYS_WAKEMSK_M2		(1 << 8)
+#define SYS_WAKEMSK_GPIO(x)	(1 << (x))
+
+/* Clock Controller */
+#define SYS_FREQCTRL0		0xB1900020
+#  define SYS_FC_FRDIV2_BIT	22
+#  define SYS_FC_FRDIV2_MASK	(0xff << SYS_FC_FRDIV2_BIT)
+#  define SYS_FC_FE2		(1 << 21)
+#  define SYS_FC_FS2		(1 << 20)
+#  define SYS_FC_FRDIV1_BIT	12
+#  define SYS_FC_FRDIV1_MASK	(0xff << SYS_FC_FRDIV1_BIT)
+#  define SYS_FC_FE1		(1 << 11)
+#  define SYS_FC_FS1		(1 << 10)
+#  define SYS_FC_FRDIV0_BIT	2
+#  define SYS_FC_FRDIV0_MASK	(0xff << SYS_FC_FRDIV0_BIT)
+#  define SYS_FC_FE0		(1 << 1)
+#  define SYS_FC_FS0		(1 << 0)
+#define SYS_FREQCTRL1		0xB1900024
+#  define SYS_FC_FRDIV5_BIT	22
+#  define SYS_FC_FRDIV5_MASK	(0xff << SYS_FC_FRDIV5_BIT)
+#  define SYS_FC_FE5		(1 << 21)
+#  define SYS_FC_FS5		(1 << 20)
+#  define SYS_FC_FRDIV4_BIT	12
+#  define SYS_FC_FRDIV4_MASK	(0xff << SYS_FC_FRDIV4_BIT)
+#  define SYS_FC_FE4		(1 << 11)
+#  define SYS_FC_FS4		(1 << 10)
+#  define SYS_FC_FRDIV3_BIT	2
+#  define SYS_FC_FRDIV3_MASK	(0xff << SYS_FC_FRDIV3_BIT)
+#  define SYS_FC_FE3		(1 << 1)
+#  define SYS_FC_FS3		(1 << 0)
+#define SYS_CLKSRC		0xB1900028
+#  define SYS_CS_ME1_BIT	27
+#  define SYS_CS_ME1_MASK	(0x7 << SYS_CS_ME1_BIT)
+#  define SYS_CS_DE1		(1 << 26)
+#  define SYS_CS_CE1		(1 << 25)
+#  define SYS_CS_ME0_BIT	22
+#  define SYS_CS_ME0_MASK	(0x7 << SYS_CS_ME0_BIT)
+#  define SYS_CS_DE0		(1 << 21)
+#  define SYS_CS_CE0		(1 << 20)
+#  define SYS_CS_MI2_BIT	17
+#  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
+#  define SYS_CS_DI2		(1 << 16)
+#  define SYS_CS_CI2		(1 << 15)
+
+#  define SYS_CS_ML_BIT		7
+#  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
+#  define SYS_CS_DL		(1 << 6)
+#  define SYS_CS_CL		(1 << 5)
+
+#  define SYS_CS_MUH_BIT	12
+#  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
+#  define SYS_CS_DUH		(1 << 11)
+#  define SYS_CS_CUH		(1 << 10)
+#  define SYS_CS_MUD_BIT	7
+#  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
+#  define SYS_CS_DUD		(1 << 6)
+#  define SYS_CS_CUD		(1 << 5)
+
+#  define SYS_CS_MIR_BIT	2
+#  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
+#  define SYS_CS_DIR		(1 << 1)
+#  define SYS_CS_CIR		(1 << 0)
+
+#  define SYS_CS_MUX_AUX	0x1
+#  define SYS_CS_MUX_FQ0	0x2
+#  define SYS_CS_MUX_FQ1	0x3
+#  define SYS_CS_MUX_FQ2	0x4
+#  define SYS_CS_MUX_FQ3	0x5
+#  define SYS_CS_MUX_FQ4	0x6
+#  define SYS_CS_MUX_FQ5	0x7
+#define SYS_CPUPLL		0xB1900060
+#define SYS_AUXPLL		0xB1900064
+
+
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI.  When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
+ */
+#define ALCHEMY_PCI_MEMWIN_START	(AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END		(ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
+
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START		0x00001000
+#define ALCHEMY_PCI_IOWIN_END		0x0000FFFF
+
+#ifdef CONFIG_PCI
+
+#define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xfffffffffULL
+
+#else
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START	0x10000000
+#define IOPORT_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_START	0x10000000
+#define IOMEM_RESOURCE_END	0xfffffffffULL
+
+#endif
+
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM		0x0000
+#define PCI_REG_CONFIG		0x0004
+#define PCI_REG_B2BMASK_CCH	0x0008
+#define PCI_REG_B2BBASE0_VID	0x000C
+#define PCI_REG_B2BBASE1_SID	0x0010
+#define PCI_REG_MWMASK_DEV	0x0014
+#define PCI_REG_MWBASE_REV_CCL	0x0018
+#define PCI_REG_ERR_ADDR	0x001C
+#define PCI_REG_SPEC_INTACK	0x0020
+#define PCI_REG_ID		0x0100
+#define PCI_REG_STATCMD		0x0104
+#define PCI_REG_CLASSREV	0x0108
+#define PCI_REG_PARAM		0x010C
+#define PCI_REG_MBAR		0x0110
+#define PCI_REG_TIMEOUT		0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E		(1 << 28)	/* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x)	(((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x)	((x) & 0x3fff)
+#define PCI_CONFIG_ERD		(1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET		(1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF		(1 << 25) /* fatal error */
+#define PCI_CONFIG_EP		(1 << 24) /* parity error */
+#define PCI_CONFIG_EM		(1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM		(1 << 22) /* bad master error */
+#define PCI_CONFIG_PD		(1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME		(1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC		(1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA		(1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP		(1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS		(1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM		(1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM		(1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT		(1 << 9)  /* int on target abort (as target) */
+#define PCI_CONFIG_IPB		(1 << 8)  /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO	(0 << 6)  /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR	(1 << 6)  /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT	(2 << 6)  /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL	(3 << 6)  /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST		(1 << 5)  /* swap data by target transactions */
+#define PCI_CONFIG_SM		(1 << 4)  /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN		(1 << 3)  /* enable internal arbiter */
+#define PCI_CONFIG_R2H		(1 << 2)  /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H		(1 << 1)  /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH		(1 << 0)  /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x)	((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x)	((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x)	(((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x)	((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x)	((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x)	 (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x)	 ((x) & 0xff)
+#define PCI_ID_DID(x)		(((x) & 0xffff) << 16)
+#define PCI_ID_VID(x)		((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x)	(((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x)	((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x)	(((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x)	((x) & 0xff)
+#define PCI_PARAM_BIST(x)	(((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x)		(((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x)		(((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x)	((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x)	(((x) & 0xff) << 8)	/* max retries */
+#define PCI_TIMEOUT_TO(x)	((x) & 0xff)	/* target ready timeout */
+
+
+/**********************************************************************/
+
 
 #ifndef _LANGUAGE_ASSEMBLY
 
@@ -192,19 +793,20 @@ static inline void alchemy_uart_enable(u32 uart_phys)
 	/* reset, enable clock, deassert reset */
 	if ((__raw_readl(addr + 0x100) & 3) != 3) {
 		__raw_writel(0, addr + 0x100);
-		wmb();
+		wmb(); /* drain writebuffer */
 		__raw_writel(1, addr + 0x100);
-		wmb();
+		wmb(); /* drain writebuffer */
 	}
 	__raw_writel(3, addr + 0x100);
-	wmb();
+	wmb(); /* drain writebuffer */
 }
 
 static inline void alchemy_uart_disable(u32 uart_phys)
 {
 	void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys);
+
 	__raw_writel(0, addr + 0x100);	/* UART_MOD_CNTRL */
-	wmb();
+	wmb(); /* drain writebuffer */
 }
 
 static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
@@ -223,7 +825,7 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
 	} while (--timeout);
 
 	__raw_writel(c, base + 0x04);	/* tx */
-	wmb();
+	wmb(); /* drain writebuffer */
 }
 
 /* return number of ethernet MACs on a given cputype */
@@ -253,7 +855,7 @@ void alchemy_sleep_au1550(void);
 void alchemy_sleep_au1300(void);
 void au_sleep(void);
 
-/* USB: drivers/usb/host/alchemy-common.c */
+/* USB: arch/mips/alchemy/common/usb.c */
 enum alchemy_usb_block {
 	ALCHEMY_USB_OHCI0,
 	ALCHEMY_USB_UDC0,
@@ -272,6 +874,20 @@ struct alchemy_pci_platdata {
 	unsigned long pci_cfg_clr;
 };
 
+/* The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's
+ * not used to select FIR/SIR mode on the transceiver but as a GPIO.
+ * Instead a CPLD has to be told about the mode.  The driver calls the
+ * set_phy_mode() function in addition to driving the IRFIRSEL pin.
+ */
+#define AU1000_IRDA_PHY_MODE_OFF	0
+#define AU1000_IRDA_PHY_MODE_SIR	1
+#define AU1000_IRDA_PHY_MODE_FIR	2
+
+struct au1k_irda_platform_data {
+	void (*set_phy_mode)(int mode);
+};
+
+
 /* Multifunction pins: Each of these pins can either be assigned to the
  * GPIO controller or a on-chip peripheral.
  * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to
@@ -344,20 +960,6 @@ enum au1300_vss_block {
 
 extern void au1300_vss_block_control(int block, int enable);
 
-
-/* SOC Interrupt numbers */
-/* Au1000-style (IC0/1): 2 controllers with 32 sources each */
-#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
-#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
-#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
-#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
-#define AU1000_MAX_INTR		AU1000_INTC1_INT_LAST
-
-/* Au1300-style (GPIC): 1 controller with up to 128 sources */
-#define ALCHEMY_GPIC_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
-#define ALCHEMY_GPIC_INT_NUM	128
-#define ALCHEMY_GPIC_INT_LAST	(ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1)
-
 enum soc_au1000_ints {
 	AU1000_FIRST_INT	= AU1000_INTC0_INT_BASE,
 	AU1000_UART0_INT	= AU1000_FIRST_INT,
@@ -678,602 +1280,4 @@ enum soc_au1200_ints {
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
-/* Au1300 peripheral interrupt numbers */
-#define AU1300_FIRST_INT	(ALCHEMY_GPIC_INT_BASE)
-#define AU1300_UART1_INT	(AU1300_FIRST_INT + 17)
-#define AU1300_UART2_INT	(AU1300_FIRST_INT + 25)
-#define AU1300_UART3_INT	(AU1300_FIRST_INT + 27)
-#define AU1300_SD1_INT		(AU1300_FIRST_INT + 32)
-#define AU1300_SD2_INT		(AU1300_FIRST_INT + 38)
-#define AU1300_PSC0_INT		(AU1300_FIRST_INT + 48)
-#define AU1300_PSC1_INT		(AU1300_FIRST_INT + 52)
-#define AU1300_PSC2_INT		(AU1300_FIRST_INT + 56)
-#define AU1300_PSC3_INT		(AU1300_FIRST_INT + 60)
-#define AU1300_NAND_INT		(AU1300_FIRST_INT + 62)
-#define AU1300_DDMA_INT		(AU1300_FIRST_INT + 75)
-#define AU1300_MMU_INT		(AU1300_FIRST_INT + 76)
-#define AU1300_MPU_INT		(AU1300_FIRST_INT + 77)
-#define AU1300_GPU_INT		(AU1300_FIRST_INT + 78)
-#define AU1300_UDMA_INT		(AU1300_FIRST_INT + 79)
-#define AU1300_TOY_INT		(AU1300_FIRST_INT + 80)
-#define AU1300_TOY_MATCH0_INT	(AU1300_FIRST_INT + 81)
-#define AU1300_TOY_MATCH1_INT	(AU1300_FIRST_INT + 82)
-#define AU1300_TOY_MATCH2_INT	(AU1300_FIRST_INT + 83)
-#define AU1300_RTC_INT		(AU1300_FIRST_INT + 84)
-#define AU1300_RTC_MATCH0_INT	(AU1300_FIRST_INT + 85)
-#define AU1300_RTC_MATCH1_INT	(AU1300_FIRST_INT + 86)
-#define AU1300_RTC_MATCH2_INT	(AU1300_FIRST_INT + 87)
-#define AU1300_UART0_INT	(AU1300_FIRST_INT + 88)
-#define AU1300_SD0_INT		(AU1300_FIRST_INT + 89)
-#define AU1300_USB_INT		(AU1300_FIRST_INT + 90)
-#define AU1300_LCD_INT		(AU1300_FIRST_INT + 91)
-#define AU1300_BSA_INT		(AU1300_FIRST_INT + 92)
-#define AU1300_MPE_INT		(AU1300_FIRST_INT + 93)
-#define AU1300_ITE_INT		(AU1300_FIRST_INT + 94)
-#define AU1300_AES_INT		(AU1300_FIRST_INT + 95)
-#define AU1300_CIM_INT		(AU1300_FIRST_INT + 96)
-
-/**********************************************************************/
-
-/*
- * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300
- */
-
-#define AU1000_AC97_PHYS_ADDR		0x10000000 /* 012 */
-#define AU1300_ROM_PHYS_ADDR		0x10000000 /* 5 */
-#define AU1300_OTP_PHYS_ADDR		0x10002000 /* 5 */
-#define AU1300_VSS_PHYS_ADDR		0x10003000 /* 5 */
-#define AU1300_UART0_PHYS_ADDR		0x10100000 /* 5 */
-#define AU1300_UART1_PHYS_ADDR		0x10101000 /* 5 */
-#define AU1300_UART2_PHYS_ADDR		0x10102000 /* 5 */
-#define AU1300_UART3_PHYS_ADDR		0x10103000 /* 5 */
-#define AU1000_USB_OHCI_PHYS_ADDR	0x10100000 /* 012 */
-#define AU1000_USB_UDC_PHYS_ADDR	0x10200000 /* 0123 */
-#define AU1300_GPIC_PHYS_ADDR		0x10200000 /* 5 */
-#define AU1000_IRDA_PHYS_ADDR		0x10300000 /* 02 */
-#define AU1200_AES_PHYS_ADDR		0x10300000 /* 45 */
-#define AU1000_IC0_PHYS_ADDR		0x10400000 /* 01234 */
-#define AU1300_GPU_PHYS_ADDR		0x10500000 /* 5 */
-#define AU1000_MAC0_PHYS_ADDR		0x10500000 /* 023 */
-#define AU1000_MAC1_PHYS_ADDR		0x10510000 /* 023 */
-#define AU1000_MACEN_PHYS_ADDR		0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR		0x10600000 /* 245 */
-#define AU1300_SD1_PHYS_ADDR		0x10601000 /* 5 */
-#define AU1300_SD2_PHYS_ADDR		0x10602000 /* 5 */
-#define AU1100_SD1_PHYS_ADDR		0x10680000 /* 24 */
-#define AU1300_SYS_PHYS_ADDR		0x10900000 /* 5 */
-#define AU1550_PSC2_PHYS_ADDR		0x10A00000 /* 3 */
-#define AU1550_PSC3_PHYS_ADDR		0x10B00000 /* 3 */
-#define AU1300_PSC0_PHYS_ADDR		0x10A00000 /* 5 */
-#define AU1300_PSC1_PHYS_ADDR		0x10A01000 /* 5 */
-#define AU1300_PSC2_PHYS_ADDR		0x10A02000 /* 5 */
-#define AU1300_PSC3_PHYS_ADDR		0x10A03000 /* 5 */
-#define AU1000_I2S_PHYS_ADDR		0x11000000 /* 02 */
-#define AU1500_MAC0_PHYS_ADDR		0x11500000 /* 1 */
-#define AU1500_MAC1_PHYS_ADDR		0x11510000 /* 1 */
-#define AU1500_MACEN_PHYS_ADDR		0x11520000 /* 1 */
-#define AU1000_UART0_PHYS_ADDR		0x11100000 /* 01234 */
-#define AU1200_SWCNT_PHYS_ADDR		0x1110010C /* 4 */
-#define AU1000_UART1_PHYS_ADDR		0x11200000 /* 0234 */
-#define AU1000_UART2_PHYS_ADDR		0x11300000 /* 0 */
-#define AU1000_UART3_PHYS_ADDR		0x11400000 /* 0123 */
-#define AU1000_SSI0_PHYS_ADDR		0x11600000 /* 02 */
-#define AU1000_SSI1_PHYS_ADDR		0x11680000 /* 02 */
-#define AU1500_GPIO2_PHYS_ADDR		0x11700000 /* 1234 */
-#define AU1000_IC1_PHYS_ADDR		0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR		0x11900000 /* 012345 */
-#define AU1550_PSC0_PHYS_ADDR		0x11A00000 /* 34 */
-#define AU1550_PSC1_PHYS_ADDR		0x11B00000 /* 34 */
-#define AU1000_MEM_PHYS_ADDR		0x14000000 /* 01234 */
-#define AU1000_STATIC_MEM_PHYS_ADDR	0x14001000 /* 01234 */
-#define AU1300_UDMA_PHYS_ADDR		0x14001800 /* 5 */
-#define AU1000_DMA_PHYS_ADDR		0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR		0x14002000 /* 345 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR	0x14003000 /* 345 */
-#define AU1000_MACDMA0_PHYS_ADDR	0x14004000 /* 0123 */
-#define AU1000_MACDMA1_PHYS_ADDR	0x14004200 /* 0123 */
-#define AU1200_CIM_PHYS_ADDR		0x14004000 /* 45 */
-#define AU1500_PCI_PHYS_ADDR		0x14005000 /* 13 */
-#define AU1550_PE_PHYS_ADDR		0x14008000 /* 3 */
-#define AU1200_MAEBE_PHYS_ADDR		0x14010000 /* 4 */
-#define AU1200_MAEFE_PHYS_ADDR		0x14012000 /* 4 */
-#define AU1300_MAEITE_PHYS_ADDR		0x14010000 /* 5 */
-#define AU1300_MAEMPE_PHYS_ADDR		0x14014000 /* 5 */
-#define AU1550_USB_OHCI_PHYS_ADDR	0x14020000 /* 3 */
-#define AU1200_USB_CTL_PHYS_ADDR	0x14020000 /* 4 */
-#define AU1200_USB_OTG_PHYS_ADDR	0x14020020 /* 4 */
-#define AU1200_USB_OHCI_PHYS_ADDR	0x14020100 /* 4 */
-#define AU1200_USB_EHCI_PHYS_ADDR	0x14020200 /* 4 */
-#define AU1200_USB_UDC_PHYS_ADDR	0x14022000 /* 4 */
-#define AU1300_USB_EHCI_PHYS_ADDR	0x14020000 /* 5 */
-#define AU1300_USB_OHCI0_PHYS_ADDR	0x14020400 /* 5 */
-#define AU1300_USB_OHCI1_PHYS_ADDR	0x14020800 /* 5 */
-#define AU1300_USB_CTL_PHYS_ADDR	0x14021000 /* 5 */
-#define AU1300_USB_OTG_PHYS_ADDR	0x14022000 /* 5 */
-#define AU1300_MAEBSA_PHYS_ADDR		0x14030000 /* 5 */
-#define AU1100_LCD_PHYS_ADDR		0x15000000 /* 2 */
-#define AU1200_LCD_PHYS_ADDR		0x15000000 /* 45 */
-#define AU1500_PCI_MEM_PHYS_ADDR	0x400000000ULL /* 13 */
-#define AU1500_PCI_IO_PHYS_ADDR		0x500000000ULL /* 13 */
-#define AU1500_PCI_CONFIG0_PHYS_ADDR	0x600000000ULL /* 13 */
-#define AU1500_PCI_CONFIG1_PHYS_ADDR	0x680000000ULL /* 13 */
-#define AU1000_PCMCIA_IO_PHYS_ADDR	0xF00000000ULL /* 012345 */
-#define AU1000_PCMCIA_ATTR_PHYS_ADDR	0xF40000000ULL /* 012345 */
-#define AU1000_PCMCIA_MEM_PHYS_ADDR	0xF80000000ULL /* 012345 */
-
-/**********************************************************************/
-
-
-/*
- * Au1300 GPIO+INT controller (GPIC) register offsets and bits
- * Registers are 128bits (0x10 bytes), divided into 4 "banks".
- */
-#define AU1300_GPIC_PINVAL	0x0000
-#define AU1300_GPIC_PINVALCLR	0x0010
-#define AU1300_GPIC_IPEND	0x0020
-#define AU1300_GPIC_PRIENC	0x0030
-#define AU1300_GPIC_IEN		0x0040	/* int_mask in manual */
-#define AU1300_GPIC_IDIS	0x0050	/* int_maskclr in manual */
-#define AU1300_GPIC_DMASEL	0x0060
-#define AU1300_GPIC_DEVSEL	0x0080
-#define AU1300_GPIC_DEVCLR	0x0090
-#define AU1300_GPIC_RSTVAL	0x00a0
-/* pin configuration space. one 32bit register for up to 128 IRQs */
-#define AU1300_GPIC_PINCFG	0x1000
-
-#define GPIC_GPIO_TO_BIT(gpio)	\
-	(1 << ((gpio) & 0x1f))
-
-#define GPIC_GPIO_BANKOFF(gpio) \
-	(((gpio) >> 5) * 4)
-
-/* Pin Control bits: who owns the pin, what does it do */
-#define GPIC_CFG_PC_GPIN		0
-#define GPIC_CFG_PC_DEV			1
-#define GPIC_CFG_PC_GPOLOW		2
-#define GPIC_CFG_PC_GPOHIGH		3
-#define GPIC_CFG_PC_MASK		3
-
-/* assign pin to MIPS IRQ line */
-#define GPIC_CFG_IL_SET(x)	(((x) & 3) << 2)
-#define GPIC_CFG_IL_MASK	(3 << 2)
-
-/* pin interrupt type setup */
-#define GPIC_CFG_IC_OFF		(0 << 4)
-#define GPIC_CFG_IC_LEVEL_LOW	(1 << 4)
-#define GPIC_CFG_IC_LEVEL_HIGH	(2 << 4)
-#define GPIC_CFG_IC_EDGE_FALL	(5 << 4)
-#define GPIC_CFG_IC_EDGE_RISE	(6 << 4)
-#define GPIC_CFG_IC_EDGE_BOTH	(7 << 4)
-#define GPIC_CFG_IC_MASK	(7 << 4)
-
-/* allow interrupt to wake cpu from 'wait' */
-#define GPIC_CFG_IDLEWAKE	(1 << 7)
-
-/***********************************************************************/
-
-/* Au1000 SDRAM memory controller register offsets */
-#define AU1000_MEM_SDMODE0		0x0000
-#define AU1000_MEM_SDMODE1		0x0004
-#define AU1000_MEM_SDMODE2		0x0008
-#define AU1000_MEM_SDADDR0		0x000C
-#define AU1000_MEM_SDADDR1		0x0010
-#define AU1000_MEM_SDADDR2		0x0014
-#define AU1000_MEM_SDREFCFG		0x0018
-#define AU1000_MEM_SDPRECMD		0x001C
-#define AU1000_MEM_SDAUTOREF		0x0020
-#define AU1000_MEM_SDWRMD0		0x0024
-#define AU1000_MEM_SDWRMD1		0x0028
-#define AU1000_MEM_SDWRMD2		0x002C
-#define AU1000_MEM_SDSLEEP		0x0030
-#define AU1000_MEM_SDSMCKE		0x0034
-
-/* MEM_SDMODE register content definitions */
-#define MEM_SDMODE_F		(1 << 22)
-#define MEM_SDMODE_SR		(1 << 21)
-#define MEM_SDMODE_BS		(1 << 20)
-#define MEM_SDMODE_RS		(3 << 18)
-#define MEM_SDMODE_CS		(7 << 15)
-#define MEM_SDMODE_TRAS		(15 << 11)
-#define MEM_SDMODE_TMRD		(3 << 9)
-#define MEM_SDMODE_TWR		(3 << 7)
-#define MEM_SDMODE_TRP		(3 << 5)
-#define MEM_SDMODE_TRCD		(3 << 3)
-#define MEM_SDMODE_TCL		(7 << 0)
-
-#define MEM_SDMODE_BS_2Bank	(0 << 20)
-#define MEM_SDMODE_BS_4Bank	(1 << 20)
-#define MEM_SDMODE_RS_11Row	(0 << 18)
-#define MEM_SDMODE_RS_12Row	(1 << 18)
-#define MEM_SDMODE_RS_13Row	(2 << 18)
-#define MEM_SDMODE_RS_N(N)	((N) << 18)
-#define MEM_SDMODE_CS_7Col	(0 << 15)
-#define MEM_SDMODE_CS_8Col	(1 << 15)
-#define MEM_SDMODE_CS_9Col	(2 << 15)
-#define MEM_SDMODE_CS_10Col	(3 << 15)
-#define MEM_SDMODE_CS_11Col	(4 << 15)
-#define MEM_SDMODE_CS_N(N)	((N) << 15)
-#define MEM_SDMODE_TRAS_N(N)	((N) << 11)
-#define MEM_SDMODE_TMRD_N(N)	((N) << 9)
-#define MEM_SDMODE_TWR_N(N)	((N) << 7)
-#define MEM_SDMODE_TRP_N(N)	((N) << 5)
-#define MEM_SDMODE_TRCD_N(N)	((N) << 3)
-#define MEM_SDMODE_TCL_N(N)	((N) << 0)
-
-/* MEM_SDADDR register contents definitions */
-#define MEM_SDADDR_E		(1 << 20)
-#define MEM_SDADDR_CSBA		(0x03FF << 10)
-#define MEM_SDADDR_CSMASK	(0x03FF << 0)
-#define MEM_SDADDR_CSBA_N(N)	((N) & (0x03FF << 22) >> 12)
-#define MEM_SDADDR_CSMASK_N(N)	((N)&(0x03FF << 22) >> 22)
-
-/* MEM_SDREFCFG register content definitions */
-#define MEM_SDREFCFG_TRC	(15 << 28)
-#define MEM_SDREFCFG_TRPM	(3 << 26)
-#define MEM_SDREFCFG_E		(1 << 25)
-#define MEM_SDREFCFG_RE		(0x1ffffff << 0)
-#define MEM_SDREFCFG_TRC_N(N)	((N) << MEM_SDREFCFG_TRC)
-#define MEM_SDREFCFG_TRPM_N(N)	((N) << MEM_SDREFCFG_TRPM)
-#define MEM_SDREFCFG_REF_N(N)	(N)
-
-/* Au1550 SDRAM Register Offsets */
-#define AU1550_MEM_SDMODE0		0x0800
-#define AU1550_MEM_SDMODE1		0x0808
-#define AU1550_MEM_SDMODE2		0x0810
-#define AU1550_MEM_SDADDR0		0x0820
-#define AU1550_MEM_SDADDR1		0x0828
-#define AU1550_MEM_SDADDR2		0x0830
-#define AU1550_MEM_SDCONFIGA		0x0840
-#define AU1550_MEM_SDCONFIGB		0x0848
-#define AU1550_MEM_SDSTAT		0x0850
-#define AU1550_MEM_SDERRADDR		0x0858
-#define AU1550_MEM_SDSTRIDE0		0x0860
-#define AU1550_MEM_SDSTRIDE1		0x0868
-#define AU1550_MEM_SDSTRIDE2		0x0870
-#define AU1550_MEM_SDWRMD0		0x0880
-#define AU1550_MEM_SDWRMD1		0x0888
-#define AU1550_MEM_SDWRMD2		0x0890
-#define AU1550_MEM_SDPRECMD		0x08C0
-#define AU1550_MEM_SDAUTOREF		0x08C8
-#define AU1550_MEM_SDSREF		0x08D0
-#define AU1550_MEM_SDSLEEP		MEM_SDSREF
-
-/* Static Bus Controller */
-#define MEM_STCFG0		0xB4001000
-#define MEM_STTIME0		0xB4001004
-#define MEM_STADDR0		0xB4001008
-
-#define MEM_STCFG1		0xB4001010
-#define MEM_STTIME1		0xB4001014
-#define MEM_STADDR1		0xB4001018
-
-#define MEM_STCFG2		0xB4001020
-#define MEM_STTIME2		0xB4001024
-#define MEM_STADDR2		0xB4001028
-
-#define MEM_STCFG3		0xB4001030
-#define MEM_STTIME3		0xB4001034
-#define MEM_STADDR3		0xB4001038
-
-#define MEM_STNDCTL		0xB4001100
-#define MEM_STSTAT		0xB4001104
-
-#define MEM_STNAND_CMD		0x0
-#define MEM_STNAND_ADDR		0x4
-#define MEM_STNAND_DATA		0x20
-
-
-/* Programmable Counters 0 and 1 */
-#define SYS_BASE		0xB1900000
-#define SYS_COUNTER_CNTRL	(SYS_BASE + 0x14)
-#  define SYS_CNTRL_E1S		(1 << 23)
-#  define SYS_CNTRL_T1S		(1 << 20)
-#  define SYS_CNTRL_M21		(1 << 19)
-#  define SYS_CNTRL_M11		(1 << 18)
-#  define SYS_CNTRL_M01		(1 << 17)
-#  define SYS_CNTRL_C1S		(1 << 16)
-#  define SYS_CNTRL_BP		(1 << 14)
-#  define SYS_CNTRL_EN1		(1 << 13)
-#  define SYS_CNTRL_BT1		(1 << 12)
-#  define SYS_CNTRL_EN0		(1 << 11)
-#  define SYS_CNTRL_BT0		(1 << 10)
-#  define SYS_CNTRL_E0		(1 << 8)
-#  define SYS_CNTRL_E0S		(1 << 7)
-#  define SYS_CNTRL_32S		(1 << 5)
-#  define SYS_CNTRL_T0S		(1 << 4)
-#  define SYS_CNTRL_M20		(1 << 3)
-#  define SYS_CNTRL_M10		(1 << 2)
-#  define SYS_CNTRL_M00		(1 << 1)
-#  define SYS_CNTRL_C0S		(1 << 0)
-
-/* Programmable Counter 0 Registers */
-#define SYS_TOYTRIM		(SYS_BASE + 0)
-#define SYS_TOYWRITE		(SYS_BASE + 4)
-#define SYS_TOYMATCH0		(SYS_BASE + 8)
-#define SYS_TOYMATCH1		(SYS_BASE + 0xC)
-#define SYS_TOYMATCH2		(SYS_BASE + 0x10)
-#define SYS_TOYREAD		(SYS_BASE + 0x40)
-
-/* Programmable Counter 1 Registers */
-#define SYS_RTCTRIM		(SYS_BASE + 0x44)
-#define SYS_RTCWRITE		(SYS_BASE + 0x48)
-#define SYS_RTCMATCH0		(SYS_BASE + 0x4C)
-#define SYS_RTCMATCH1		(SYS_BASE + 0x50)
-#define SYS_RTCMATCH2		(SYS_BASE + 0x54)
-#define SYS_RTCREAD		(SYS_BASE + 0x58)
-
-
-/*
- * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not
- * used to select FIR/SIR mode on the transceiver but as a GPIO.  Instead a
- * CPLD has to be told about the mode.
- */
-#define AU1000_IRDA_PHY_MODE_OFF	0
-#define AU1000_IRDA_PHY_MODE_SIR	1
-#define AU1000_IRDA_PHY_MODE_FIR	2
-
-struct au1k_irda_platform_data {
-	void(*set_phy_mode)(int mode);
-};
-
-
-/* GPIO */
-#define SYS_PINFUNC		0xB190002C
-#  define SYS_PF_USB		(1 << 15)	/* 2nd USB device/host */
-#  define SYS_PF_U3		(1 << 14)	/* GPIO23/U3TXD */
-#  define SYS_PF_U2		(1 << 13)	/* GPIO22/U2TXD */
-#  define SYS_PF_U1		(1 << 12)	/* GPIO21/U1TXD */
-#  define SYS_PF_SRC		(1 << 11)	/* GPIO6/SROMCKE */
-#  define SYS_PF_CK5		(1 << 10)	/* GPIO3/CLK5 */
-#  define SYS_PF_CK4		(1 << 9)	/* GPIO2/CLK4 */
-#  define SYS_PF_IRF		(1 << 8)	/* GPIO15/IRFIRSEL */
-#  define SYS_PF_UR3		(1 << 7)	/* GPIO[14:9]/UART3 */
-#  define SYS_PF_I2D		(1 << 6)	/* GPIO8/I2SDI */
-#  define SYS_PF_I2S		(1 << 5)	/* I2S/GPIO[29:31] */
-#  define SYS_PF_NI2		(1 << 4)	/* NI2/GPIO[24:28] */
-#  define SYS_PF_U0		(1 << 3)	/* U0TXD/GPIO20 */
-#  define SYS_PF_RD		(1 << 2)	/* IRTXD/GPIO19 */
-#  define SYS_PF_A97		(1 << 1)	/* AC97/SSL1 */
-#  define SYS_PF_S0		(1 << 0)	/* SSI_0/GPIO[16:18] */
-
-/* Au1100 only */
-#  define SYS_PF_PC		(1 << 18)	/* PCMCIA/GPIO[207:204] */
-#  define SYS_PF_LCD		(1 << 17)	/* extern lcd/GPIO[203:200] */
-#  define SYS_PF_CS		(1 << 16)	/* EXTCLK0/32KHz to gpio2 */
-#  define SYS_PF_EX0		(1 << 9)	/* GPIO2/clock */
-
-/* Au1550 only.	 Redefines lots of pins */
-#  define SYS_PF_PSC2_MASK	(7 << 17)
-#  define SYS_PF_PSC2_AC97	0
-#  define SYS_PF_PSC2_SPI	0
-#  define SYS_PF_PSC2_I2S	(1 << 17)
-#  define SYS_PF_PSC2_SMBUS	(3 << 17)
-#  define SYS_PF_PSC2_GPIO	(7 << 17)
-#  define SYS_PF_PSC3_MASK	(7 << 20)
-#  define SYS_PF_PSC3_AC97	0
-#  define SYS_PF_PSC3_SPI	0
-#  define SYS_PF_PSC3_I2S	(1 << 20)
-#  define SYS_PF_PSC3_SMBUS	(3 << 20)
-#  define SYS_PF_PSC3_GPIO	(7 << 20)
-#  define SYS_PF_PSC1_S1	(1 << 1)
-#  define SYS_PF_MUST_BE_SET	((1 << 5) | (1 << 2))
-
-/* Au1200 only */
-#define SYS_PINFUNC_DMA		(1 << 31)
-#define SYS_PINFUNC_S0A		(1 << 30)
-#define SYS_PINFUNC_S1A		(1 << 29)
-#define SYS_PINFUNC_LP0		(1 << 28)
-#define SYS_PINFUNC_LP1		(1 << 27)
-#define SYS_PINFUNC_LD16	(1 << 26)
-#define SYS_PINFUNC_LD8		(1 << 25)
-#define SYS_PINFUNC_LD1		(1 << 24)
-#define SYS_PINFUNC_LD0		(1 << 23)
-#define SYS_PINFUNC_P1A		(3 << 21)
-#define SYS_PINFUNC_P1B		(1 << 20)
-#define SYS_PINFUNC_FS3		(1 << 19)
-#define SYS_PINFUNC_P0A		(3 << 17)
-#define SYS_PINFUNC_CS		(1 << 16)
-#define SYS_PINFUNC_CIM		(1 << 15)
-#define SYS_PINFUNC_P1C		(1 << 14)
-#define SYS_PINFUNC_U1T		(1 << 12)
-#define SYS_PINFUNC_U1R		(1 << 11)
-#define SYS_PINFUNC_EX1		(1 << 10)
-#define SYS_PINFUNC_EX0		(1 << 9)
-#define SYS_PINFUNC_U0R		(1 << 8)
-#define SYS_PINFUNC_MC		(1 << 7)
-#define SYS_PINFUNC_S0B		(1 << 6)
-#define SYS_PINFUNC_S0C		(1 << 5)
-#define SYS_PINFUNC_P0B		(1 << 4)
-#define SYS_PINFUNC_U0T		(1 << 3)
-#define SYS_PINFUNC_S1B		(1 << 2)
-
-/* Power Management */
-#define SYS_SCRATCH0		0xB1900018
-#define SYS_SCRATCH1		0xB190001C
-#define SYS_WAKEMSK		0xB1900034
-#define SYS_ENDIAN		0xB1900038
-#define SYS_POWERCTRL		0xB190003C
-#define SYS_WAKESRC		0xB190005C
-#define SYS_SLPPWR		0xB1900078
-#define SYS_SLEEP		0xB190007C
-
-#define SYS_WAKEMSK_D2		(1 << 9)
-#define SYS_WAKEMSK_M2		(1 << 8)
-#define SYS_WAKEMSK_GPIO(x)	(1 << (x))
-
-/* Clock Controller */
-#define SYS_FREQCTRL0		0xB1900020
-#  define SYS_FC_FRDIV2_BIT	22
-#  define SYS_FC_FRDIV2_MASK	(0xff << SYS_FC_FRDIV2_BIT)
-#  define SYS_FC_FE2		(1 << 21)
-#  define SYS_FC_FS2		(1 << 20)
-#  define SYS_FC_FRDIV1_BIT	12
-#  define SYS_FC_FRDIV1_MASK	(0xff << SYS_FC_FRDIV1_BIT)
-#  define SYS_FC_FE1		(1 << 11)
-#  define SYS_FC_FS1		(1 << 10)
-#  define SYS_FC_FRDIV0_BIT	2
-#  define SYS_FC_FRDIV0_MASK	(0xff << SYS_FC_FRDIV0_BIT)
-#  define SYS_FC_FE0		(1 << 1)
-#  define SYS_FC_FS0		(1 << 0)
-#define SYS_FREQCTRL1		0xB1900024
-#  define SYS_FC_FRDIV5_BIT	22
-#  define SYS_FC_FRDIV5_MASK	(0xff << SYS_FC_FRDIV5_BIT)
-#  define SYS_FC_FE5		(1 << 21)
-#  define SYS_FC_FS5		(1 << 20)
-#  define SYS_FC_FRDIV4_BIT	12
-#  define SYS_FC_FRDIV4_MASK	(0xff << SYS_FC_FRDIV4_BIT)
-#  define SYS_FC_FE4		(1 << 11)
-#  define SYS_FC_FS4		(1 << 10)
-#  define SYS_FC_FRDIV3_BIT	2
-#  define SYS_FC_FRDIV3_MASK	(0xff << SYS_FC_FRDIV3_BIT)
-#  define SYS_FC_FE3		(1 << 1)
-#  define SYS_FC_FS3		(1 << 0)
-#define SYS_CLKSRC		0xB1900028
-#  define SYS_CS_ME1_BIT	27
-#  define SYS_CS_ME1_MASK	(0x7 << SYS_CS_ME1_BIT)
-#  define SYS_CS_DE1		(1 << 26)
-#  define SYS_CS_CE1		(1 << 25)
-#  define SYS_CS_ME0_BIT	22
-#  define SYS_CS_ME0_MASK	(0x7 << SYS_CS_ME0_BIT)
-#  define SYS_CS_DE0		(1 << 21)
-#  define SYS_CS_CE0		(1 << 20)
-#  define SYS_CS_MI2_BIT	17
-#  define SYS_CS_MI2_MASK	(0x7 << SYS_CS_MI2_BIT)
-#  define SYS_CS_DI2		(1 << 16)
-#  define SYS_CS_CI2		(1 << 15)
-
-#  define SYS_CS_ML_BIT		7
-#  define SYS_CS_ML_MASK	(0x7 << SYS_CS_ML_BIT)
-#  define SYS_CS_DL		(1 << 6)
-#  define SYS_CS_CL		(1 << 5)
-
-#  define SYS_CS_MUH_BIT	12
-#  define SYS_CS_MUH_MASK	(0x7 << SYS_CS_MUH_BIT)
-#  define SYS_CS_DUH		(1 << 11)
-#  define SYS_CS_CUH		(1 << 10)
-#  define SYS_CS_MUD_BIT	7
-#  define SYS_CS_MUD_MASK	(0x7 << SYS_CS_MUD_BIT)
-#  define SYS_CS_DUD		(1 << 6)
-#  define SYS_CS_CUD		(1 << 5)
-
-#  define SYS_CS_MIR_BIT	2
-#  define SYS_CS_MIR_MASK	(0x7 << SYS_CS_MIR_BIT)
-#  define SYS_CS_DIR		(1 << 1)
-#  define SYS_CS_CIR		(1 << 0)
-
-#  define SYS_CS_MUX_AUX	0x1
-#  define SYS_CS_MUX_FQ0	0x2
-#  define SYS_CS_MUX_FQ1	0x3
-#  define SYS_CS_MUX_FQ2	0x4
-#  define SYS_CS_MUX_FQ3	0x5
-#  define SYS_CS_MUX_FQ4	0x6
-#  define SYS_CS_MUX_FQ5	0x7
-#define SYS_CPUPLL		0xB1900060
-#define SYS_AUXPLL		0xB1900064
-
-
-/* The PCI chip selects are outside the 32bit space, and since we can't
- * just program the 36bit addresses into BARs, we have to take a chunk
- * out of the 32bit space and reserve it for PCI.  When these addresses
- * are ioremap()ed, they'll be fixed up to the real 36bit address before
- * being passed to the real ioremap function.
- */
-#define ALCHEMY_PCI_MEMWIN_START	(AU1500_PCI_MEM_PHYS_ADDR >> 4)
-#define ALCHEMY_PCI_MEMWIN_END		(ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
-
-/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
- * adjust the device's resources.
- */
-#define ALCHEMY_PCI_IOWIN_START		0x00001000
-#define ALCHEMY_PCI_IOWIN_END		0x0000FFFF
-
-#ifdef CONFIG_PCI
-
-#define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
-#define IOPORT_RESOURCE_END	0xffffffff
-#define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xfffffffffULL
-
-#else
-
-/* Don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START	0x10000000
-#define IOPORT_RESOURCE_END	0xffffffff
-#define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xfffffffffULL
-
-#endif
-
-/* PCI controller block register offsets */
-#define PCI_REG_CMEM		0x0000
-#define PCI_REG_CONFIG		0x0004
-#define PCI_REG_B2BMASK_CCH	0x0008
-#define PCI_REG_B2BBASE0_VID	0x000C
-#define PCI_REG_B2BBASE1_SID	0x0010
-#define PCI_REG_MWMASK_DEV	0x0014
-#define PCI_REG_MWBASE_REV_CCL	0x0018
-#define PCI_REG_ERR_ADDR	0x001C
-#define PCI_REG_SPEC_INTACK	0x0020
-#define PCI_REG_ID		0x0100
-#define PCI_REG_STATCMD		0x0104
-#define PCI_REG_CLASSREV	0x0108
-#define PCI_REG_PARAM		0x010C
-#define PCI_REG_MBAR		0x0110
-#define PCI_REG_TIMEOUT		0x0140
-
-/* PCI controller block register bits */
-#define PCI_CMEM_E		(1 << 28)	/* enable cacheable memory */
-#define PCI_CMEM_CMBASE(x)	(((x) & 0x3fff) << 14)
-#define PCI_CMEM_CMMASK(x)	((x) & 0x3fff)
-#define PCI_CONFIG_ERD		(1 << 27) /* pci error during R/W */
-#define PCI_CONFIG_ET		(1 << 26) /* error in target mode */
-#define PCI_CONFIG_EF		(1 << 25) /* fatal error */
-#define PCI_CONFIG_EP		(1 << 24) /* parity error */
-#define PCI_CONFIG_EM		(1 << 23) /* multiple errors */
-#define PCI_CONFIG_BM		(1 << 22) /* bad master error */
-#define PCI_CONFIG_PD		(1 << 20) /* PCI Disable */
-#define PCI_CONFIG_BME		(1 << 19) /* Byte Mask Enable for reads */
-#define PCI_CONFIG_NC		(1 << 16) /* mark mem access non-coherent */
-#define PCI_CONFIG_IA		(1 << 15) /* INTA# enabled (target mode) */
-#define PCI_CONFIG_IP		(1 << 13) /* int on PCI_PERR# */
-#define PCI_CONFIG_IS		(1 << 12) /* int on PCI_SERR# */
-#define PCI_CONFIG_IMM		(1 << 11) /* int on master abort */
-#define PCI_CONFIG_ITM		(1 << 10) /* int on target abort (as master) */
-#define PCI_CONFIG_ITT		(1 << 9)  /* int on target abort (as target) */
-#define PCI_CONFIG_IPB		(1 << 8)  /* int on PERR# in bus master acc */
-#define PCI_CONFIG_SIC_NO	(0 << 6)  /* no byte mask changes */
-#define PCI_CONFIG_SIC_BA_ADR	(1 << 6)  /* on byte/hw acc, invert adr bits */
-#define PCI_CONFIG_SIC_HWA_DAT	(2 << 6)  /* on halfword acc, swap data */
-#define PCI_CONFIG_SIC_ALL	(3 << 6)  /* swap data bytes on all accesses */
-#define PCI_CONFIG_ST		(1 << 5)  /* swap data by target transactions */
-#define PCI_CONFIG_SM		(1 << 4)  /* swap data from PCI ctl */
-#define PCI_CONFIG_AEN		(1 << 3)  /* enable internal arbiter */
-#define PCI_CONFIG_R2H		(1 << 2)  /* REQ2# to hi-prio arbiter */
-#define PCI_CONFIG_R1H		(1 << 1)  /* REQ1# to hi-prio arbiter */
-#define PCI_CONFIG_CH		(1 << 0)  /* PCI ctl to hi-prio arbiter */
-#define PCI_B2BMASK_B2BMASK(x)	(((x) & 0xffff) << 16)
-#define PCI_B2BMASK_CCH(x)	((x) & 0xffff) /* 16 upper bits of class code */
-#define PCI_B2BBASE0_VID_B0(x)	(((x) & 0xffff) << 16)
-#define PCI_B2BBASE0_VID_SV(x)	((x) & 0xffff)
-#define PCI_B2BBASE1_SID_B1(x)	(((x) & 0xffff) << 16)
-#define PCI_B2BBASE1_SID_SI(x)	((x) & 0xffff)
-#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
-#define PCI_MWMASKDEV_DEVID(x)	((x) & 0xffff)
-#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
-#define PCI_MWBASEREVCCL_REV(x)	 (((x) & 0xff) << 8)
-#define PCI_MWBASEREVCCL_CCL(x)	 ((x) & 0xff)
-#define PCI_ID_DID(x)		(((x) & 0xffff) << 16)
-#define PCI_ID_VID(x)		((x) & 0xffff)
-#define PCI_STATCMD_STATUS(x)	(((x) & 0xffff) << 16)
-#define PCI_STATCMD_CMD(x)	((x) & 0xffff)
-#define PCI_CLASSREV_CLASS(x)	(((x) & 0x00ffffff) << 8)
-#define PCI_CLASSREV_REV(x)	((x) & 0xff)
-#define PCI_PARAM_BIST(x)	(((x) & 0xff) << 24)
-#define PCI_PARAM_HT(x)		(((x) & 0xff) << 16)
-#define PCI_PARAM_LT(x)		(((x) & 0xff) << 8)
-#define PCI_PARAM_CLS(x)	((x) & 0xff)
-#define PCI_TIMEOUT_RETRIES(x)	(((x) & 0xff) << 8)	/* max retries */
-#define PCI_TIMEOUT_TO(x)	((x) & 0xff)	/* target ready timeout */
-
 #endif