arm: Remove plat-tcc directory

The Telechips ARM architecture is being removed. This patch
deletes the arch/arm/plat-tcc/ folder.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>

15 files changed, 0 insertions, 1411 deletions

diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf499570f42..000000000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
-	prompt "Telechips CPU type:"
-	default ARCH_TCC8K
-
-config ARCH_TCC8K
-	bool TCC8000
-	select USB_ARCH_HAS_OHCI
-	help
-	  Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc869b8f..000000000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10d5271..000000000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk@linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	BUG_ON(clk->refcount == 0);
-
-	if (!(--clk->refcount) && clk->disable) {
-		/* Unconditionally disable the clock in hardware */
-		clk->disable(clk);
-		/* recursively disable parents */
-		if (clk->parent)
-			__clk_disable(clk->parent);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->refcount++ == 0 && clk->enable) {
-		if (clk->parent)
-			ret = __clk_enable(clk->parent);
-		if (ret)
-			return ret;
-		else
-			return clk->enable(clk);
-	}
-
-	return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!clk)
-		return 0;
-	if (!clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (!clk)
-		return ret;
-	if (!clk->set_rate || !rate)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	struct clk *old;
-	int ret = -EINVAL;
-
-	if (!clk)
-		return ret;
-	if (!clk->set_parent || !parent)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	old = clk->parent;
-	if (clk->refcount)
-		__clk_enable(parent);
-	ret = clk->set_parent(clk, parent);
-	if (ret)
-		old = parent;
-	if (clk->refcount)
-		__clk_disable(old);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (!clk)
-		return NULL;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58ad71a8..000000000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
-	struct clk *parent;
-	/* id number of a root clock, 0 for normal clocks */
-	int root_id;
-	/* Reference count of clock enable/disable */
-	int refcount;
-	/* Address of associated BCLKCTRx register. Must be set. */
-	void __iomem *bclkctr;
-	/* Bit position for BCLKCTRx. Must be set. */
-	int bclk_shift;
-	/* Address of ACLKxxx register, if any. */
-	void __iomem *aclkreg;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04ec30d..000000000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-		.macro	addruart, rp, rv, tmp
-		moveq	\rp, #0x90000000	@ physical base address
-		movne	\rv, #0xF1000000	@ virtual base
-		orr	\rp, \rp, #0x00007000	@ UART0
-		orr	\rv, \rv, #0x00007000	@ UART0
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #0x44]
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:
-		ldr \rd, [\rx, #0x14]
-		tst \rd, #0x20
-
-		beq 1001b
-		.endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401e4b6d..000000000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr	\base, =0xF2003000 @ base address of PIC registers
-
-		@@ read MREQ register of PIC0
-
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base, #0x00000014 ]	@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		@@ read MREQ register of PIC1
-
-		ldr	\irqstat, [\base, #0x00000094]	@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126ccaf3..000000000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by:    <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		0xfffece00
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL		0xfffecf00
-
-#endif	/* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3ea0f1..000000000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			__typesafe_io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da863894d498..000000000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1	0
-#define INT_BDMA	1
-#define INT_ADMA0	2
-#define INT_GDMA1	3
-#define INT_I2S0RX	4
-#define INT_I2S0TX	5
-#define INT_TC		6
-#define INT_UART0	7
-#define INT_USBD	8
-#define INT_SPI0TX	9
-#define INT_UDMA	10
-#define INT_LIRQ	11
-#define INT_GDMA2	12
-#define INT_GDMA0	13
-#define INT_TC32	14
-#define INT_LCD		15
-#define INT_ADC		16
-#define INT_I2C		17
-#define INT_RTCP	18
-#define INT_RTCA	19
-#define INT_NFC		20
-#define INT_SD0		21
-#define INT_GSB0	22
-#define INT_PK		23
-#define INT_USBH0	24
-#define INT_USBH1	25
-#define INT_G2D		26
-#define INT_ECC		27
-#define INT_SPI0RX	28
-#define INT_UART1	29
-#define INT_MSCL	30
-#define INT_GSB1	31
-/* PIC1 interrupts */
-#define INT_E0		32
-#define INT_E1		33
-#define INT_E2		34
-#define INT_E3		35
-#define INT_E4		36
-#define INT_E5		37
-#define INT_E6		38
-#define INT_E7		39
-#define INT_UART2	40
-#define INT_UART3	41
-#define INT_SPI1TX	42
-#define INT_SPI1RX	43
-#define INT_GSB2	44
-#define INT_SPDIF	45
-#define INT_CDIF	46
-#define INT_VBON	47
-#define INT_VBOFF	48
-#define INT_SD1		49
-#define INT_UART4	50
-#define INT_GDMA3	51
-#define INT_I2S1RX	52
-#define INT_I2S1TX	53
-#define INT_CAN0	54
-#define INT_CAN1	55
-#define INT_GSB3	56
-#define INT_KRST	57
-#define INT_UNUSED	58
-#define INT_SD0D3	59
-#define INT_SD1D3	60
-#define INT_GPS0	61
-#define INT_GPS1	62
-#define INT_GPS2	63
-
-#endif  /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e6035d843..000000000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d9428295332..000000000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE		0x20000000
-#define INT_SRAM_BASE		0x30000000
-#define INT_SRAM_SIZE		SZ_32K
-#define CS0_BASE		0x40000000
-#define CS1_BASE		0x50000000
-#define CS1_SIZE		SZ_64K
-#define CS2_BASE		0x60000000
-#define CS3_BASE		0x70000000
-#define AHB_PERI_BASE		0x80000000
-#define AHB_PERI_SIZE		SZ_64K
-#define APB0_PERI_BASE		0x90000000
-#define APB0_PERI_SIZE		SZ_128K
-#define APB1_PERI_BASE		0x98000000
-#define APB1_PERI_SIZE		SZ_128K
-#define DATA_TCM_BASE		0xa0000000
-#define DATA_TCM_SIZE		SZ_8K
-#define EXT_MEM_CTRL_BASE	0xf0000000
-#define EXT_MEM_CTRL_SIZE	SZ_4K
-
-#define CS1_BASE_VIRT		(void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT	(void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT	(void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT	(void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT	(void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT	(void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT	(void __iomem *)0xf6000000
-
-#define __REG(x)     (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE	(AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS	(AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS		0x00
-#define UDC_EIR_OFFS		0x04
-#define UDC_EIER_OFFS		0x08
-#define UDC_FAR_OFFS		0x0c
-#define UDC_FNR_OFFS		0x10
-#define UDC_EDR_OFFS		0x14
-#define UDC_RT_OFFS		0x18
-#define UDC_SSR_OFFS		0x1c
-#define UDC_SCR_OFFS		0x20
-#define UDC_EP0SR_OFFS		0x24
-#define UDC_EP0CR_OFFS		0x28
-
-#define UDC_ESR_OFFS		0x2c
-#define UDC_ECR_OFFS		0x30
-#define UDC_BRCR_OFFS		0x34
-#define UDC_BWCR_OFFS		0x38
-#define UDC_MPR_OFFS		0x3c
-#define UDC_DCR_OFFS		0x40
-#define UDC_DTCR_OFFS		0x44
-#define UDC_DFCR_OFFS		0x48
-#define UDC_DTTCR1_OFFS		0x4c
-#define UDC_DTTCR2_OFFS		0x50
-#define UDC_ESR2_OFFS		0x54
-
-#define UDC_SCR2_OFFS		0x58
-#define UDC_EP0BUF_OFFS		0x60
-#define UDC_EP1BUF_OFFS		0x64
-#define UDC_EP2BUF_OFFS		0x68
-#define UDC_EP3BUF_OFFS		0x6c
-#define UDC_PLICR_OFFS		0xa0
-#define UDC_PCR_OFFS		0xa4
-
-#define UDC_UPCR0_OFFS		0xc8
-#define UDC_UPCR1_OFFS		0xcc
-#define UDC_UPCR2_OFFS		0xd0
-#define UDC_UPCR3_OFFS		0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I		(1 << 0)
-#define UDC_EIR_EP1I		(1 << 1)
-#define UDC_EIR_EP2I		(1 << 2)
-#define UDC_EIR_EP3I		(1 << 3)
-#define UDC_EIR_EPI_MASK	0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE		(1 << 0)
-#define UDC_EIER_EP1IE		(1 << 1)
-#define UDC_EIER_EP2IE		(1 << 2)
-#define UDC_EIER_EP3IE		(1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK		0x7ff
-#define UDC_FNR_SM		(1 << 13)
-#define UDC_FNR_FTL		(1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES		(1 << 0)
-#define UDC_SSR_HFSUSP		(1 << 1)
-#define UDC_SSR_HFRM		(1 << 2)
-#define UDC_SSR_SDE		(1 << 3)
-#define UDC_SSR_HSP		(1 << 4)
-#define UDC_SSR_DM		(1 << 5)
-#define UDC_SSR_DP		(1 << 6)
-#define UDC_SSR_TBM		(1 << 7)
-#define UDC_SSR_VBON		(1 << 8)
-#define UDC_SSR_VBOFF		(1 << 9)
-#define UDC_SSR_EOERR		(1 << 10)
-#define UDC_SSR_DCERR		(1 << 11)
-#define UDC_SSR_TCERR		(1 << 12)
-#define UDC_SSR_BSERR		(1 << 13)
-#define UDC_SSR_TMERR		(1 << 14)
-#define UDC_SSR_BAERR		(1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE		(1 << 0)
-#define UDC_SCR_HSSPE		(1 << 1)
-#define UDC_SCR_RRDE		(1 << 5)
-#define UDC_SCR_SPDEN		(1 << 6)
-#define UDC_SCR_DIEN		(1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR		(1 << 0)
-#define UDC_EP0SR_TST		(1 << 1)
-#define UDC_EP0SR_SHT		(1 << 4)
-#define UDC_EP0SR_LWO		(1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS		(1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS		(1 << 0)
-#define UDC_ESR_TPS		(1 << 1)
-#define UDC_ESR_LWO		(1 << 4)
-#define UDC_ESR_FFS		(1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS		(1 << 1)
-#define UDC_ECR_CDP		(1 << 2)
-
-#define UDC_ECR_FLUSH		(1 << 6)
-#define UDC_ECR_DUEN		(1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD		(1 << 1)
-#define UDC_UPCR0_VBDS		(1 << 6)
-#define UDC_UPCR0_RCD_12	(0x0 << 9)
-#define UDC_UPCR0_RCD_24	(0x1 << 9)
-#define UDC_UPCR0_RCD_48	(0x2 << 9)
-#define UDC_UPCR0_RCS_EXT	(0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL	(0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x)	((x) << 0)
-#define UDC_UPCR1_OTGT(x)	((x) << 3)
-#define UDC_UPCR1_SQRXT(x)	((x) << 8)
-#define UDC_UPCR1_TXFSLST(x)	((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP		(1 << 0)
-#define UDC_UPCR2_TXRT(x)	((x) << 2)
-#define UDC_UPCR2_TXVRT(x)	((x) << 5)
-#define UDC_UPCR2_OPMODE(x)	((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x)	((x) << 12)
-#define UDC_UPCR2_TM		(1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE	(AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE	(AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS	0x10
-
-#define RH_DESCRIPTOR_A_OFFS	0x48
-#define RH_DESCRIPTOR_B_OFFS	0x4c
-
-#define USBHTCFG0_OFFS		0x100
-#define USBHHCFG0_OFFS		0x104
-#define USBHHCFG1_OFFS		0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE	(AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE	(AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE	(AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE	(AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch)	(ch * 0x30)
-
-#define ST_SADR_OFFS		0x00
-#define SPARAM_OFFS		0x04
-#define C_SADR_OFFS		0x0c
-#define ST_DADR_OFFS		0x10
-#define DPARAM_OFFS		0x14
-#define C_DADR_OFFS		0x1c
-#define HCOUNT_OFFS		0x20
-#define CHCTRL_OFFS		0x24
-#define RPTCTRL_OFFS		0x28
-#define EXTREQ_A_OFFS		0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN		(1 << 0)
-
-#define CHCTRL_IEN		(1 << 2)
-#define CHCTRL_FLAG		(1 << 3)
-#define CHCTRL_WSIZE8		(0 << 4)
-#define CHCTRL_WSIZE16		(1 << 4)
-#define CHCTRL_WSIZE32		(2 << 4)
-
-#define CHCTRL_BSIZE1		(0 << 6)
-#define CHCTRL_BSIZE2		(1 << 6)
-#define CHCTRL_BSIZE4		(2 << 6)
-#define CHCTRL_BSIZE8		(3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E	(0 << 8)
-#define CHCTRL_TYPE_HW		(1 << 8)
-#define CHCTRL_TYPE_SW		(2 << 8)
-#define CHCTRL_TYPE_SINGLE_L	(3 << 8)
-
-#define CHCTRL_BST		(1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE		(DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE	(AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS	(AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS		0x00
-#define NFC_LADDR_OFFS		0x04
-#define NFC_BADDR_OFFS		0x08
-#define NFC_SADDR_OFFS		0x0c
-#define NFC_WDATA_OFFS		0x10
-#define NFC_LDATA_OFFS		0x20
-#define NFC_SDATA_OFFS		0x40
-#define NFC_CTRL_OFFS		0x50
-#define NFC_PSTART_OFFS		0x54
-#define NFC_RSTART_OFFS		0x58
-#define NFC_DSIZE_OFFS		0x5c
-#define NFC_IREQ_OFFS		0x60
-#define NFC_RST_OFFS		0x64
-#define NFC_CTRL1_OFFS		0x68
-#define NFC_MDATA_OFFS		0x70
-
-#define NFC_WDATA_PHYS_ADDR	(NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK	(0xf << 0)
-#define NFC_CTRL_BPW_MASK	(0xf << 4)
-#define NFC_CTRL_BSTP_MASK	(0xf << 8)
-#define NFC_CTRL_CADDR_MASK	(0x7 << 12)
-#define NFC_CTRL_CADDR_1	(0x0 << 12)
-#define NFC_CTRL_CADDR_2	(0x1 << 12)
-#define NFC_CTRL_CADDR_3	(0x2 << 12)
-#define NFC_CTRL_CADDR_4	(0x3 << 12)
-#define NFC_CTRL_CADDR_5	(0x4 << 12)
-#define NFC_CTRL_MSK		(1 << 15)
-#define NFC_CTRL_PSIZE256	(0 << 16)
-#define NFC_CTRL_PSIZE512	(1 << 16)
-#define NFC_CTRL_PSIZE1024	(2 << 16)
-#define NFC_CTRL_PSIZE2048	(3 << 16)
-#define NFC_CTRL_PSIZE4096	(4 << 16)
-#define NFC_CTRL_PSIZE_MASK	(7 << 16)
-#define NFC_CTRL_BSIZE1		(0 << 19)
-#define NFC_CTRL_BSIZE2		(1 << 19)
-#define NFC_CTRL_BSIZE4		(2 << 19)
-#define NFC_CTRL_BSIZE8		(3 << 19)
-#define NFC_CTRL_BSIZE_MASK	(3 << 19)
-#define NFC_CTRL_RDY		(1 << 21)
-#define NFC_CTRL_CS0SEL		(1 << 22)
-#define NFC_CTRL_CS1SEL		(1 << 23)
-#define NFC_CTRL_CS2SEL		(1 << 24)
-#define NFC_CTRL_CS3SEL		(1 << 25)
-#define NFC_CTRL_CSMASK		(0xf << 22)
-#define NFC_CTRL_BW		(1 << 26)
-#define NFC_CTRL_FS		(1 << 27)
-#define NFC_CTRL_DEN		(1 << 28)
-#define NFC_CTRL_READ_IEN	(1 << 29)
-#define NFC_CTRL_PROG_IEN	(1 << 30)
-#define NFC_CTRL_RDY_IEN	(1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0		(1 << 0)
-#define NFC_IREQ_IRQ1		(1 << 1)
-#define NFC_IREQ_IRQ2		(1 << 2)
-
-#define NFC_IREQ_FLAG0		(1 << 4)
-#define NFC_IREQ_FLAG1		(1 << 5)
-#define NFC_IREQ_FLAG2		(1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE	(AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE	(AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE	(APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS	(APB0_PERI_BASE + 0x07000)
-#define UART1_BASE	(APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS	(APB0_PERI_BASE + 0x08000)
-#define UART2_BASE	(APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS	(APB0_PERI_BASE + 0x09000)
-#define UART3_BASE	(APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS	(APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE	(APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS	(APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE	UART0_BASE
-#define UART_BASE_PHYS	UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE	(APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS		0x00
-#define ECC_BASE_OFFS		0x04
-#define ECC_MASK_OFFS		0x08
-#define ECC_CLEAR_OFFS		0x0c
-#define ECC4_0_OFFS		0x10
-#define ECC4_1_OFFS		0x14
-
-#define ECC_EADDR0_OFFS		0x50
-
-#define ECC_ERRNUM_OFFS		0x90
-#define ECC_IREQ_OFFS		0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN	(1 << 28)
-#define ECC_CTRL_ECC8_DIEN	(1 << 29)
-#define ECC_CTRL_ECC12_DIEN	(1 << 30)
-#define ECC_CTRL_ECC_DISABLE	0x0
-#define ECC_CTRL_ECC_SLC_ENC	0x8
-#define ECC_CTRL_ECC_SLC_DEC	0x9
-#define ECC_CTRL_ECC4_ENC	0xa
-#define ECC_CTRL_ECC4_DEC	0xb
-#define ECC_CTRL_ECC8_ENC	0xc
-#define ECC_CTRL_ECC8_DEC	0xd
-#define ECC_CTRL_ECC12_ENC	0xe
-#define ECC_CTRL_ECC12_DEC	0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI		(1 << 4)
-
-#define ECC_IREQ_E4DF		(1 << 20)
-#define ECC_IREQ_E4EF		(1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE	(APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS	(APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS		0x00
-#define PIC0_CREQ_OFFS		0x04
-#define PIC0_IREQ_OFFS		0x08
-#define PIC0_IRQSEL_OFFS	0x0c
-#define PIC0_SRC_OFFS		0x10
-#define PIC0_MREQ_OFFS		0x14
-#define PIC0_TSTREQ_OFFS	0x18
-#define PIC0_POL_OFFS		0x1c
-#define PIC0_IRQ_OFFS		0x20
-#define PIC0_FIQ_OFFS		0x24
-#define PIC0_MIRQ_OFFS		0x28
-#define PIC0_MFIQ_OFFS		0x2c
-#define PIC0_TMODE_OFFS		0x30
-#define PIC0_SYNC_OFFS		0x34
-#define PIC0_WKUP_OFFS		0x38
-#define PIC0_TMODEA_OFFS	0x3c
-#define PIC0_INTOEN_OFFS	0x40
-#define PIC0_MEN0_OFFS		0x44
-#define PIC0_MEN_OFFS		0x48
-
-#define PIC0_IEN		__REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS		__REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ		__REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS		__REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ		__REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL		__REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS	__REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC		__REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ		__REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ		__REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL		__REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ		__REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ		__REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ		__REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ		__REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE		__REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS		__REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC		__REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP		__REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA		__REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN		__REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0		__REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN		__REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE	(APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS		0x00
-#define PIC1_CREQ_OFFS		0x04
-#define PIC1_IREQ_OFFS		0x08
-#define PIC1_IRQSEL_OFFS	0x0c
-#define PIC1_SRC_OFFS		0x10
-#define PIC1_MREQ_OFFS		0x14
-#define PIC1_TSTREQ_OFFS	0x18
-#define PIC1_POL_OFFS		0x1c
-#define PIC1_IRQ_OFFS		0x20
-#define PIC1_FIQ_OFFS		0x24
-#define PIC1_MIRQ_OFFS		0x28
-#define PIC1_MFIQ_OFFS		0x2c
-#define PIC1_TMODE_OFFS		0x30
-#define PIC1_SYNC_OFFS		0x34
-#define PIC1_WKUP_OFFS		0x38
-#define PIC1_TMODEA_OFFS	0x3c
-#define PIC1_INTOEN_OFFS	0x40
-#define PIC1_MEN1_OFFS		0x44
-#define PIC1_MEN_OFFS		0x48
-
-#define PIC1_IEN	__REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ	__REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ	__REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL	__REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC	__REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ	__REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ	__REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL	__REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ	__REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ	__REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ	__REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ	__REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE	__REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC	__REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP	__REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA	__REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN	__REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1	__REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN	__REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE		(APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS		(APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS		0x70
-
-#define TC32EN_OFFS		0x80
-#define TC32LDV_OFFS		0x84
-#define TC32CMP0_OFFS		0x88
-#define TC32CMP1_OFFS		0x8c
-#define TC32PCNT_OFFS		0x90
-#define TC32MCNT_OFFS		0x94
-#define TC32IRQ_OFFS		0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK	0x00ffffff
-#define TC32EN_ENABLE		(1 << 24)
-#define TC32EN_LOADZERO		(1 << 25)
-#define TC32EN_STOPMODE		(1 << 26)
-#define TC32EN_LDM0		(1 << 28)
-#define TC32EN_LDM1		(1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK	0x0000001f
-#define TC32IRQ_RSTAT_MASK	(0x1f << 8)
-#define TC32IRQ_IRQEN0		(1 << 16)
-#define TC32IRQ_IRQEN1		(1 << 17)
-#define TC32IRQ_IRQEN2		(1 << 18)
-#define TC32IRQ_IRQEN3		(1 << 19)
-#define TC32IRQ_IRQEN4		(1 << 20)
-#define TC32IRQ_RSYNC		(1 << 30)
-#define TC32IRQ_IRQCLR		(1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS		0x00
-#define GPIOPD_DOE_OFFS		0x04
-#define GPIOPD_FS0_OFFS		0x08
-#define GPIOPD_FS1_OFFS		0x0c
-#define GPIOPD_FS2_OFFS		0x10
-#define GPIOPD_RPU_OFFS		0x30
-#define GPIOPD_RPD_OFFS		0x34
-#define GPIOPD_DV0_OFFS		0x38
-#define GPIOPD_DV1_OFFS		0x3c
-
-#define GPIOPS_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS		0x40
-#define GPIOPS_DOE_OFFS		0x44
-#define GPIOPS_FS0_OFFS		0x48
-#define GPIOPS_FS1_OFFS		0x4c
-#define GPIOPS_FS2_OFFS		0x50
-#define GPIOPS_FS3_OFFS		0x54
-#define GPIOPS_RPU_OFFS		0x70
-#define GPIOPS_RPD_OFFS		0x74
-#define GPIOPS_DV0_OFFS		0x78
-#define GPIOPS_DV1_OFFS		0x7c
-
-#define GPIOPS_FS1_SDH0_BITS	0x000000ff
-#define GPIOPS_FS1_SDH1_BITS	0x0000ff00
-
-#define GPIOPU_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS		0x80
-#define GPIOPU_DOE_OFFS		0x84
-#define GPIOPU_FS0_OFFS		0x88
-#define GPIOPU_FS1_OFFS		0x8c
-#define GPIOPU_FS2_OFFS		0x90
-#define GPIOPU_RPU_OFFS		0xb0
-#define GPIOPU_RPD_OFFS		0xb4
-#define GPIOPU_DV0_OFFS		0xb8
-#define GPIOPU_DV1_OFFS		0xbc
-
-#define GPIOPU_FS0_TXD0		(1 << 0)
-#define GPIOPU_FS0_RXD0		(1 << 1)
-#define GPIOPU_FS0_CTS0		(1 << 2)
-#define GPIOPU_FS0_RTS0		(1 << 3)
-#define GPIOPU_FS0_TXD1		(1 << 4)
-#define GPIOPU_FS0_RXD1		(1 << 5)
-#define GPIOPU_FS0_CTS1		(1 << 6)
-#define GPIOPU_FS0_RTS1		(1 << 7)
-#define GPIOPU_FS0_TXD2		(1 << 8)
-#define GPIOPU_FS0_RXD2		(1 << 9)
-#define GPIOPU_FS0_CTS2		(1 << 10)
-#define GPIOPU_FS0_RTS2		(1 << 11)
-#define GPIOPU_FS0_TXD3		(1 << 12)
-#define GPIOPU_FS0_RXD3		(1 << 13)
-#define GPIOPU_FS0_CTS3		(1 << 14)
-#define GPIOPU_FS0_RTS3		(1 << 15)
-#define GPIOPU_FS0_TXD4		(1 << 16)
-#define GPIOPU_FS0_RXD4		(1 << 17)
-#define GPIOPU_FS0_CTS4		(1 << 18)
-#define GPIOPU_FS0_RTS4		(1 << 19)
-
-#define GPIOFC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS		0xc0
-#define GPIOFC_DOE_OFFS		0xc4
-#define GPIOFC_FS0_OFFS		0xc8
-#define GPIOFC_FS1_OFFS		0xcc
-#define GPIOFC_FS2_OFFS		0xd0
-#define GPIOFC_FS3_OFFS		0xd4
-#define GPIOFC_RPU_OFFS		0xf0
-#define GPIOFC_RPD_OFFS		0xf4
-#define GPIOFC_DV0_OFFS		0xf8
-#define GPIOFC_DV1_OFFS		0xfc
-
-#define GPIOFD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS		0x100
-#define GPIOFD_DOE_OFFS		0x104
-#define GPIOFD_FS0_OFFS		0x108
-#define GPIOFD_FS1_OFFS		0x10c
-#define GPIOFD_FS2_OFFS		0x110
-#define GPIOFD_RPU_OFFS		0x130
-#define GPIOFD_RPD_OFFS		0x134
-#define GPIOFD_DV0_OFFS		0x138
-#define GPIOFD_DV1_OFFS		0x13c
-
-#define GPIOLC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS		0x140
-#define GPIOLC_DOE_OFFS		0x144
-#define GPIOLC_FS0_OFFS		0x148
-#define GPIOLC_FS1_OFFS		0x14c
-#define GPIOLC_RPU_OFFS		0x170
-#define GPIOLC_RPD_OFFS		0x174
-#define GPIOLC_DV0_OFFS		0x178
-#define GPIOLC_DV1_OFFS		0x17c
-
-#define GPIOLD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS		0x180
-#define GPIOLD_DOE_OFFS		0x184
-#define GPIOLD_FS0_OFFS		0x188
-#define GPIOLD_FS1_OFFS		0x18c
-#define GPIOLD_FS2_OFFS		0x190
-#define GPIOLD_RPU_OFFS		0x1b0
-#define GPIOLD_RPD_OFFS		0x1b4
-#define GPIOLD_DV0_OFFS		0x1b8
-#define GPIOLD_DV1_OFFS		0x1bc
-
-#define GPIOAD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS		0x1c0
-#define GPIOAD_DOE_OFFS		0x1c4
-#define GPIOAD_FS0_OFFS		0x1c8
-#define GPIOAD_RPU_OFFS		0x1f0
-#define GPIOAD_RPD_OFFS		0x1f4
-#define GPIOAD_DV0_OFFS		0x1f8
-#define GPIOAD_DV1_OFFS		0x1fc
-
-#define GPIOXC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS		0x200
-#define GPIOXC_DOE_OFFS		0x204
-#define GPIOXC_FS0_OFFS		0x208
-#define GPIOXC_RPU_OFFS		0x230
-#define GPIOXC_RPD_OFFS		0x234
-#define GPIOXC_DV0_OFFS		0x238
-#define GPIOXC_DV1_OFFS		0x23c
-
-#define GPIOXC_FS0		__REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0		(1 << 26)
-#define GPIOXC_FS0_CS1		(1 << 27)
-
-#define GPIOXD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS		0x240
-#define GPIOXD_FS0_OFFS		0x248
-#define GPIOXD_RPU_OFFS		0x270
-#define GPIOXD_RPD_OFFS		0x274
-#define GPIOXD_DV0_OFFS		0x278
-#define GPIOXD_DV1_OFFS		0x27c
-
-#define GPIOPK_BASE		(APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS		0x008
-#define GPIOPK_DAT_OFFS		0x100
-#define GPIOPK_DOE_OFFS		0x104
-#define GPIOPK_FS0_OFFS		0x108
-#define GPIOPK_FS1_OFFS		0x10c
-#define GPIOPK_FS2_OFFS		0x110
-#define GPIOPK_IRQST_OFFS	0x210
-#define GPIOPK_IRQEN_OFFS	0x214
-#define GPIOPK_IRQPOL_OFFS	0x218
-#define GPIOPK_IRQTM0_OFFS	0x21c
-#define GPIOPK_IRQTM1_OFFS	0x220
-#define GPIOPK_CTL_OFFS		0x22c
-
-#define PMGPIO_BASE		(APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE		PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS		0x800
-#define PMGPIO_DOE_OFFS		0x804
-#define PMGPIO_FS0_OFFS		0x808
-#define PMGPIO_RPU_OFFS		0x810
-#define PMGPIO_RPD_OFFS		0x814
-#define PMGPIO_DV0_OFFS		0x818
-#define PMGPIO_DV1_OFFS		0x81c
-#define PMGPIO_EE0_OFFS		0x820
-#define PMGPIO_EE1_OFFS		0x824
-#define PMGPIO_CTL_OFFS		0x828
-#define PMGPIO_DI_OFFS		0x82c
-#define PMGPIO_STR_OFFS		0x830
-#define PMGPIO_STF_OFFS		0x834
-#define PMGPIO_POL_OFFS		0x838
-#define PMGPIO_APB_OFFS		0x800
-
-/* Clock controller registers */
-#define CKC_BASE	((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS		0x00
-#define PLL0CFG_OFFS		0x04
-#define PLL1CFG_OFFS		0x08
-#define CLKDIVC0_OFFS		0x0c
-
-#define BCLKCTR0_OFFS		0x14
-#define SWRESET0_OFFS		0x18
-
-#define BCLKCTR1_OFFS		0x60
-#define SWRESET1_OFFS		0x64
-#define PWDCTL_OFFS		0x68
-#define PLL2CFG_OFFS		0x6c
-#define CLKDIVC1_OFFS		0x70
-
-#define ACLKREF_OFFS		0x80
-#define ACLKI2C_OFFS		0x84
-#define ACLKSPI0_OFFS		0x88
-#define ACLKSPI1_OFFS		0x8c
-#define ACLKUART0_OFFS		0x90
-#define ACLKUART1_OFFS		0x94
-#define ACLKUART2_OFFS		0x98
-#define ACLKUART3_OFFS		0x9c
-#define ACLKUART4_OFFS		0xa0
-#define ACLKTCT_OFFS		0xa4
-#define ACLKTCX_OFFS		0xa8
-#define ACLKTCZ_OFFS		0xac
-#define ACLKADC_OFFS		0xb0
-#define ACLKDAI0_OFFS		0xb4
-#define ACLKDAI1_OFFS		0xb8
-#define ACLKLCD_OFFS		0xbc
-#define ACLKSPDIF_OFFS		0xc0
-#define ACLKUSBH_OFFS		0xc4
-#define ACLKSDH0_OFFS		0xc8
-#define ACLKSDH1_OFFS		0xcc
-#define ACLKC3DEC_OFFS		0xd0
-#define ACLKEXT_OFFS		0xd4
-#define ACLKCAN0_OFFS		0xd8
-#define ACLKCAN1_OFFS		0xdc
-#define ACLKGSB0_OFFS		0xe0
-#define ACLKGSB1_OFFS		0xe4
-#define ACLKGSB2_OFFS		0xe8
-#define ACLKGSB3_OFFS		0xec
-
-#define PLLxCFG_PD		(1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE		(1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE		(1 << 7)
-#define CLKDIVC0_XE		(1 << 15)
-#define CLKDIVC0_P1E		(1 << 23)
-#define CLKDIVC0_P0E		(1 << 31)
-
-#define CLKDIVC1_P2E		(1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD		(1 << 4)
-#define BCLKCTR0_ECC		(1 << 9)
-#define BCLKCTR0_USBH0		(1 << 11)
-#define BCLKCTR0_NFC		(1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1		(1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD		(1 << 4)
-#define SWRESET0_USBH0		(1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1		(1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
-	CLK_SRC_NOROOT = -1,
-	CLK_SRC_PLL0 = 0,
-	CLK_SRC_PLL1,
-	CLK_SRC_PLL0DIV,
-	CLK_SRC_PLL1DIV,
-	CLK_SRC_XI,
-	CLK_SRC_XIDIV,
-	CLK_SRC_XTI,
-	CLK_SRC_XTIDIV,
-	CLK_SRC_PLL2,
-	CLK_SRC_PLL2DIV,
-	CLK_SRC_PK0,
-	CLK_SRC_PK1,
-	CLK_SRC_PK2,
-	CLK_SRC_PK3,
-	CLK_SRC_PK4,
-	CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK		0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN		(1 << 28)
-#define ACLK_SEL_SHIFT		24
-#define ACLK_SEL_MASK		0x0f000000
-#define ACLK_DIV_MASK		0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE		(APB1_PERI_BASE_VIRT + 0x13000)
-
-#define	BMI_OFFS		0x00
-#define AHBCON0_OFFS		0x04
-#define APBPWE_OFFS		0x08
-#define DTCMWAIT_OFFS		0x0c
-#define ECCSEL_OFFS		0x10
-#define AHBCON1_OFFS		0x14
-#define SDHCFG_OFFS		0x18
-#define REMAP_OFFS		0x20
-#define LCDSIAE_OFFS		0x24
-#define XMCCFG_OFFS		0xe0
-#define IMCCFG_OFFS		0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM		0x0
-#define ECCSEL_DTCM		0x1
-#define ECCSEL_INT_SRAM		0x2
-#define ECCSEL_AHB		0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE		(1 << 1)
-#define XMCCFG_FDXD		(1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE		EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS		0x00
-#define SDFSM_OFFS		0x04
-#define MCFG_OFFS		0x08
-
-#define CSCFG0_OFFS		0x10
-#define CSCFG1_OFFS		0x14
-#define CSCFG2_OFFS		0x18
-#define CSCFG3_OFFS		0x1c
-
-#define MCFG_SDEN		(1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe651d9..000000000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a27a30..000000000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK			0x7fff
-
-static void putc(int c)
-{
-	u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
-	u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
-	while (!(*uart_lsr & UART_LSR_THRE))
-		barrier();
-	*uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9c2b94..000000000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fae3e7a..000000000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
-	/* Make sure clocks are on */
-	__raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
-	/* Enable watchdog reset */
-	__raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
-	/* Wait for reset */
-	while(1)
-		;
-}