arm64: dts: apple: t8103: Add nodes for integrated USB Type-C ports

Add device nodes and connections to support USB 3.x on the SoC's
integrated USB-C ports of M1-based devices.
Each Type-C port has an Apple Type-C PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort, a Synopsys Designware USB 3.x
controller, two DART iommu instances and a CD321x USB PD controller.
The iMac variant with four USB-C ports has two SoC integrated USB-C
ports and two additional USB-C ports driven by an AsMedia PCIe USB
controller. The latter ports are not covered by this change.
The port labels use Apple's established naming scheme for the ports.

Signed-off-by: Hector Martin <marcan@marcan.st>
Co-developed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Tested-by: Sven Peter <sven@kernel.org> # M1 mac mini and macbook air
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20260109-apple-dt-usb-c-atc-dwc3-v1-1-ce0e92c1a016@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>

7 files changed, 299 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
index 1c3e37f86d46..968fe22163d4 100644
--- a/arch/arm64/boot/dts/apple/t8103-j274.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -30,6 +30,18 @@
 };
 
 /*
+ * Provide labels for the USB type C ports.
+ */
+
+&typec0 {
+	label = "USB-C Back-left";
+};
+
+&typec1 {
+	label = "USB-C Back-right";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 5b3c42e9f0e6..678f89c3d47f 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -46,6 +46,18 @@
 	brcm,board-type = "apple,honshu";
 };
 
+/*
+ * Provide labels for the USB type C ports.
+ */
+
+&typec0 {
+	label = "USB-C Left-back";
+};
+
+&typec1 {
+	label = "USB-C Left-front";
+};
+
 &i2c2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
index 97a4344d8dca..bce9b911009e 100644
--- a/arch/arm64/boot/dts/apple/t8103-j313.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -41,3 +41,15 @@
 &fpwm1 {
 	status = "okay";
 };
+
+/*
+ * Provide labels for the USB type C ports.
+ */
+
+&typec0 {
+	label = "USB-C Left-back";
+};
+
+&typec1 {
+	label = "USB-C Left-front";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 58c8e43789b4..9983e11cacdf 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -48,6 +48,18 @@
 };
 
 /*
+ * Provide labels for the USB type C ports.
+ */
+
+&typec0 {
+	label = "USB-C Back-right";
+};
+
+&typec1 {
+	label = "USB-C Back-right-middle";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 7089ccf3ce55..6703f4a3d3db 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -38,6 +38,18 @@
 };
 
 /*
+ * Provide labels for the USB type C ports.
+ */
+
+&typec0 {
+	label = "USB-C Back-right";
+};
+
+&typec1 {
+	label = "USB-C Back-left";
+};
+
+/*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
  * (such as MAC addresses).
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 0c8206156bfe..686fb1dd215d 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -15,6 +15,8 @@
 		serial0 = &serial0;
 		serial2 = &serial2;
 		wifi0 = &wifi0;
+		atcphy0 = &atcphy0;
+		atcphy1 = &atcphy1;
 	};
 
 	chosen {
@@ -53,6 +55,29 @@
 		interrupt-parent = <&pinctrl_ap>;
 		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "irq";
+
+		typec0: connector {
+			compatible = "usb-c-connector";
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					typec0_connector_hs: endpoint {
+						remote-endpoint = <&dwc3_0_hs>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					typec0_connector_ss: endpoint {
+						remote-endpoint = <&atcphy0_typec_lanes>;
+					};
+				};
+			};
+		};
 	};
 
 	hpm1: usb-pd@3f {
@@ -61,6 +86,115 @@
 		interrupt-parent = <&pinctrl_ap>;
 		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "irq";
+
+		typec1: connector {
+			compatible = "usb-c-connector";
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					typec1_connector_hs: endpoint {
+						remote-endpoint = <&dwc3_1_hs>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					typec1_connector_ss: endpoint {
+						remote-endpoint = <&atcphy1_typec_lanes>;
+					};
+				};
+			};
+		};
+	};
+};
+
+/* USB controllers */
+&dwc3_0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dwc3_0_hs: endpoint {
+				remote-endpoint = <&typec0_connector_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dwc3_0_ss: endpoint {
+				remote-endpoint = <&atcphy0_usb3>;
+			};
+		};
+	};
+};
+
+&dwc3_1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dwc3_1_hs: endpoint {
+				remote-endpoint = <&typec1_connector_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dwc3_1_ss: endpoint {
+				remote-endpoint = <&atcphy1_usb3>;
+			};
+		};
+	};
+};
+
+/* Type-C PHYs */
+&atcphy0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			atcphy0_typec_lanes: endpoint {
+				remote-endpoint = <&typec0_connector_ss>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			atcphy0_usb3: endpoint {
+				remote-endpoint = <&dwc3_0_ss>;
+			};
+		};
+	};
+};
+
+&atcphy1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			atcphy1_typec_lanes: endpoint {
+				remote-endpoint = <&typec1_connector_ss>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			atcphy1_usb3: endpoint {
+				remote-endpoint = <&dwc3_1_ss>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 8b7b27887968..c48b10ac65ef 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	compatible = "apple,t8103", "apple,arm-platform";
@@ -1007,6 +1008,110 @@
 			resets = <&ps_ans2>;
 		};
 
+		dwc3_0: usb@382280000 {
+			compatible = "apple,t8103-dwc3";
+			reg = <0x3 0x82280000 0x0 0xcd00>, <0x3 0x8228cd00 0x0 0x3200>;
+			reg-names = "dwc3-core", "dwc3-apple";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 777 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			usb-role-switch;
+			role-switch-default-mode = "host";
+			iommus = <&dwc3_0_dart_0 0>, <&dwc3_0_dart_1 1>;
+			power-domains = <&ps_atc0_usb>;
+			resets = <&atcphy0>;
+			phys = <&atcphy0 PHY_TYPE_USB2>, <&atcphy0 PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+
+		dwc3_0_dart_0: iommu@382f00000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x3 0x82f00000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_atc0_usb>;
+		};
+
+		dwc3_0_dart_1: iommu@382f80000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x3 0x82f80000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_atc0_usb>;
+		};
+
+		atcphy0: phy@383000000 {
+			compatible = "apple,t8103-atcphy";
+			reg = <0x3 0x83000000 0x0 0x4c000>,
+				<0x3 0x83050000 0x0 0x8000>,
+				<0x3 0x80000000 0x0 0x4000>,
+				<0x3 0x82a90000 0x0 0x4000>,
+				<0x3 0x82a84000 0x0 0x4000>;
+			reg-names = "core", "lpdptx", "axi2af", "usb2phy",
+				"pipehandler";
+
+			#phy-cells = <1>;
+			#reset-cells = <0>;
+
+			orientation-switch;
+			mode-switch;
+			power-domains = <&ps_atc0_usb>;
+		};
+
+		dwc3_1: usb@502280000 {
+			compatible = "apple,t8103-dwc3";
+			reg = <0x5 0x02280000 0x0 0xcd00>, <0x5 0x0228cd00 0x0 0x3200>;
+			reg-names = "dwc3-core", "dwc3-apple";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 857 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			usb-role-switch;
+			role-switch-default-mode = "host";
+			iommus = <&dwc3_1_dart_0 0>, <&dwc3_1_dart_1 1>;
+			power-domains = <&ps_atc1_usb>;
+			resets = <&atcphy1>;
+			phys = <&atcphy1 PHY_TYPE_USB2>, <&atcphy1 PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+
+		dwc3_1_dart_0: iommu@502f00000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x5 0x02f00000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 861 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_atc1_usb>;
+		};
+
+		dwc3_1_dart_1: iommu@502f80000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x5 0x02f80000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 861 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_atc1_usb>;
+		};
+
+		atcphy1: phy@503000000 {
+			compatible = "apple,t8103-atcphy";
+			reg = <0x5 0x03000000 0x0 0x4c000>,
+				<0x5 0x03050000 0x0 0x8000>,
+				<0x5 0x0 0x0 0x4000>,
+				<0x5 0x02a90000 0x0 0x4000>,
+				<0x5 0x02a84000 0x0 0x4000>;
+			reg-names = "core", "lpdptx", "axi2af", "usb2phy",
+				"pipehandler";
+
+			#phy-cells = <1>;
+			#reset-cells = <0>;
+
+			orientation-switch;
+			mode-switch;
+			power-domains = <&ps_atc1_usb>;
+		};
+
 		pcie0_dart_0: iommu@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;