summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorQu Wenruo <wqu@suse.com>2025-11-11 01:41:59 +0300
committerDavid Sterba <dsterba@suse.com>2025-11-25 00:42:23 +0300
commit2574e9011018a1d6d3da8d03d0bfc4e2675dee2a (patch)
tree9c410d043b981d9aaaf8d5b102dcc0d3a95f47a3
parent62bcbdca0ea9b1add9c22f400b51c56184902053 (diff)
downloadlinux-2574e9011018a1d6d3da8d03d0bfc4e2675dee2a.tar.xz
btrfs: make btrfs_repair_io_failure() handle bs > ps cases without large folios
Currently btrfs_repair_io_failure() only accept a single @paddr parameter, and for bs > ps cases it's required that @paddr is backed by a large folio. That assumption has quite some limitations, preventing us from utilizing true zero-copy direct-io and encoded read/writes. To address the problem, enhance btrfs_repair_io_failure() by: - Accept an array of paddrs, up to 64K / PAGE_SIZE entries This kind of acts like a bio_vec, but with very limited entries, as the function is only utilized to repair one fs data block, or a tree block. Both have an upper size limit (BTRFS_MAX_BLOCK_SIZE, i.e. 64K), so we don't need the full bio_vec thing to handle it. - Allocate a bio with multiple slots Previously even for bs > ps cases, we only passed in a contiguous physical address range, thus a single slot will be enough. But not anymore, so we have to allocate a bio structure, other than using the on-stack one. - Use on-stack memory to allocate @paddrs array It's at most 16 pages (4K page size, 64K block size), will take up at most 128 bytes. I think the on-stack cost is still acceptable. - Add one extra check to make sure the repair bio is exactly one block - Utilize btrfs_repair_io_failure() to submit a single bio for metadata This should improve the read-repair performance for metadata, as now we submit a node sized bio then wait, other than submit each block of the metadata and wait for each submitted block. - Add one extra parameter indicating the step This is due to the fact that metadata step can be as large as nodesize, instead of sectorsize. So we need a way to distinguish metadata and data repair. - Reduce the width of @length parameter of btrfs_repair_io_failure() Since we only call btrfs_repair_io_failure() on a single data or metadata block, u64 is overkilled. Use u32 instead and add one extra ASSERT()s to make sure the length never exceed BTRFS_MAX_BLOCK_SIZE. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-rw-r--r--fs/btrfs/bio.c68
-rw-r--r--fs/btrfs/bio.h5
-rw-r--r--fs/btrfs/disk-io.c31
3 files changed, 76 insertions, 28 deletions
diff --git a/fs/btrfs/bio.c b/fs/btrfs/bio.c
index a73652b8724a..383ea6731b35 100644
--- a/fs/btrfs/bio.c
+++ b/fs/btrfs/bio.c
@@ -172,7 +172,21 @@ static void btrfs_end_repair_bio(struct btrfs_bio *repair_bbio,
struct btrfs_inode *inode = repair_bbio->inode;
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct bio_vec *bv = bio_first_bvec_all(&repair_bbio->bio);
+ /*
+ * We can not move forward the saved_iter, as it will be later
+ * utilized by repair_bbio again.
+ */
+ struct bvec_iter saved_iter = repair_bbio->saved_iter;
+ const u32 step = min(fs_info->sectorsize, PAGE_SIZE);
+ const u64 logical = repair_bbio->saved_iter.bi_sector << SECTOR_SHIFT;
+ const u32 nr_steps = repair_bbio->saved_iter.bi_size / step;
int mirror = repair_bbio->mirror_num;
+ phys_addr_t paddrs[BTRFS_MAX_BLOCKSIZE / PAGE_SIZE];
+ phys_addr_t paddr;
+ unsigned int slot = 0;
+
+ /* Repair bbio should be eaxctly one block sized. */
+ ASSERT(repair_bbio->saved_iter.bi_size == fs_info->sectorsize);
if (repair_bbio->bio.bi_status ||
!btrfs_data_csum_ok(repair_bbio, dev, 0, bvec_phys(bv))) {
@@ -190,12 +204,17 @@ static void btrfs_end_repair_bio(struct btrfs_bio *repair_bbio,
return;
}
+ btrfs_bio_for_each_block(paddr, &repair_bbio->bio, &saved_iter, step) {
+ ASSERT(slot < nr_steps);
+ paddrs[slot] = paddr;
+ slot++;
+ }
+
do {
mirror = prev_repair_mirror(fbio, mirror);
btrfs_repair_io_failure(fs_info, btrfs_ino(inode),
repair_bbio->file_offset, fs_info->sectorsize,
- repair_bbio->saved_iter.bi_sector << SECTOR_SHIFT,
- bvec_phys(bv), mirror);
+ logical, paddrs, step, mirror);
} while (mirror != fbio->bbio->mirror_num);
done:
@@ -866,18 +885,36 @@ void btrfs_submit_bbio(struct btrfs_bio *bbio, int mirror_num)
*
* The I/O is issued synchronously to block the repair read completion from
* freeing the bio.
+ *
+ * @ino: Offending inode number
+ * @fileoff: File offset inside the inode
+ * @length: Length of the repair write
+ * @logical: Logical address of the range
+ * @paddrs: Physical address array of the content
+ * @step: Length of for each paddrs
+ * @mirror_num: Mirror number to write to. Must not be zero
*/
-int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 start,
- u64 length, u64 logical, phys_addr_t paddr, int mirror_num)
+int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 fileoff,
+ u32 length, u64 logical, const phys_addr_t paddrs[],
+ unsigned int step, int mirror_num)
{
+ const u32 nr_steps = DIV_ROUND_UP_POW2(length, step);
struct btrfs_io_stripe smap = { 0 };
- struct bio_vec bvec;
- struct bio bio;
+ struct bio *bio = NULL;
int ret = 0;
ASSERT(!(fs_info->sb->s_flags & SB_RDONLY));
BUG_ON(!mirror_num);
+ /* Basic alignment checks. */
+ ASSERT(IS_ALIGNED(logical, fs_info->sectorsize));
+ ASSERT(IS_ALIGNED(length, fs_info->sectorsize));
+ ASSERT(IS_ALIGNED(fileoff, fs_info->sectorsize));
+ /* Either it's a single data or metadata block. */
+ ASSERT(length <= BTRFS_MAX_BLOCKSIZE);
+ ASSERT(step <= length);
+ ASSERT(is_power_of_2(step));
+
if (btrfs_repair_one_zone(fs_info, logical))
return 0;
@@ -897,24 +934,27 @@ int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 start,
goto out_counter_dec;
}
- bio_init(&bio, smap.dev->bdev, &bvec, 1, REQ_OP_WRITE | REQ_SYNC);
- bio.bi_iter.bi_sector = smap.physical >> SECTOR_SHIFT;
- __bio_add_page(&bio, phys_to_page(paddr), length, offset_in_page(paddr));
- ret = submit_bio_wait(&bio);
+ bio = bio_alloc(smap.dev->bdev, nr_steps, REQ_OP_WRITE | REQ_SYNC, GFP_NOFS);
+ bio->bi_iter.bi_sector = smap.physical >> SECTOR_SHIFT;
+ for (int i = 0; i < nr_steps; i++) {
+ ret = bio_add_page(bio, phys_to_page(paddrs[i]), step, offset_in_page(paddrs[i]));
+ /* We should have allocated enough slots to contain all the different pages. */
+ ASSERT(ret == step);
+ }
+ ret = submit_bio_wait(bio);
+ bio_put(bio);
if (ret) {
/* try to remap that extent elsewhere? */
btrfs_dev_stat_inc_and_print(smap.dev, BTRFS_DEV_STAT_WRITE_ERRS);
- goto out_bio_uninit;
+ goto out_counter_dec;
}
btrfs_info_rl(fs_info,
"read error corrected: ino %llu off %llu (dev %s sector %llu)",
- ino, start, btrfs_dev_name(smap.dev),
+ ino, fileoff, btrfs_dev_name(smap.dev),
smap.physical >> SECTOR_SHIFT);
ret = 0;
-out_bio_uninit:
- bio_uninit(&bio);
out_counter_dec:
btrfs_bio_counter_dec(fs_info);
return ret;
diff --git a/fs/btrfs/bio.h b/fs/btrfs/bio.h
index deaeea3becf4..035145909b00 100644
--- a/fs/btrfs/bio.h
+++ b/fs/btrfs/bio.h
@@ -117,7 +117,8 @@ void btrfs_bio_end_io(struct btrfs_bio *bbio, blk_status_t status);
void btrfs_submit_bbio(struct btrfs_bio *bbio, int mirror_num);
void btrfs_submit_repair_write(struct btrfs_bio *bbio, int mirror_num, bool dev_replace);
-int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 start,
- u64 length, u64 logical, phys_addr_t paddr, int mirror_num);
+int btrfs_repair_io_failure(struct btrfs_fs_info *fs_info, u64 ino, u64 fileoff,
+ u32 length, u64 logical, const phys_addr_t paddrs[],
+ unsigned int step, int mirror_num);
#endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 4764108b0338..0df81a09a3d1 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -183,26 +183,33 @@ static int btrfs_repair_eb_io_failure(const struct extent_buffer *eb,
int mirror_num)
{
struct btrfs_fs_info *fs_info = eb->fs_info;
+ const u32 step = min(fs_info->nodesize, PAGE_SIZE);
+ const u32 nr_steps = eb->len / step;
+ phys_addr_t paddrs[BTRFS_MAX_BLOCKSIZE / PAGE_SIZE];
int ret = 0;
if (sb_rdonly(fs_info->sb))
return -EROFS;
- for (int i = 0; i < num_extent_folios(eb); i++) {
+ for (int i = 0; i < num_extent_pages(eb); i++) {
struct folio *folio = eb->folios[i];
- u64 start = max_t(u64, eb->start, folio_pos(folio));
- u64 end = min_t(u64, eb->start + eb->len,
- folio_pos(folio) + eb->folio_size);
- u32 len = end - start;
- phys_addr_t paddr = PFN_PHYS(folio_pfn(folio)) +
- offset_in_folio(folio, start);
-
- ret = btrfs_repair_io_failure(fs_info, 0, start, len, start,
- paddr, mirror_num);
- if (ret)
- break;
+
+ /* No large folio support yet. */
+ ASSERT(folio_order(folio) == 0);
+ ASSERT(i < nr_steps);
+
+ /*
+ * For nodesize < page size, there is just one paddr, with some
+ * offset inside the page.
+ *
+ * For nodesize >= page size, it's one or more paddrs, and eb->start
+ * must be aligned to page boundary.
+ */
+ paddrs[i] = page_to_phys(&folio->page) + offset_in_page(eb->start);
}
+ ret = btrfs_repair_io_failure(fs_info, 0, eb->start, eb->len, eb->start,
+ paddrs, step, mirror_num);
return ret;
}