Merge tag 'imx-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt

i.MX ARM device tree changes for 7.2:

DT Binding Cleanup:
- Replaced undocumented compatible strings with proper ones:
  * edt,edt-ft5x06 -> edt,edt-ft5206
  * marvell,88E1510 -> ethernet-phy-ieee802.3-c22
  * karo,imx6qdl-tx6-sgtl5000 -> simple-audio-card
- Fixed incorrect VAR-SOM-MX6UL references (corrected to VAR-SOM-MX6)
- Added missing required properties:
  * #phy-cells for usb-nop-xceiv
  * #io-channel-cells to ADC nodes
  * bus-type for ov5642/ov5640 cameras
  * ti,deskew = <0> for ti,tfp410
- Added missing supply properties (power-supply, vdd-supply, dvdd-supply, avdd-supply)
- Removed redundant/empty properties (bus-width for video-mux, empty clock-names)
- Fixed boolean property warnings and non-existent property references
- Converted TS-4800 watchdog to DT schema
- Renamed wdt nodes to watchdog for consistency

New Features Added:
- PCIe Root Port nodes and PERST property for imx6qdl, imx6sx, and imx7d
- OV5645 camera support for imx7d-pico-pi
- LVDS display panel support for imx6ul-var-som
- WiFi and Bluetooth support for VAR-SOM boards
- nvmem-layout support for imx7
- New bus bindings: fsl,aipi-bus and fsl,emi-bus
- New board binding: variscite,var-som-imx6ull

Code Refactoring:
- VAR-SOM-MX6UL/ULL: factored out common parts for CPU variants
- Separated audio, ethernet (ENET1/ENET2), and SD card support into reusable components

* tag 'imx-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (35 commits)
  dt-bindings: soc: imx: Add fsl,aipi-bus and fsl,emi-bus
  ARM: dts: freescale: add bootph-all to i.MX7ULP watchdog nodes
  ARM: dts: imx7: add nvmem-layout
  ARM: dts: imx7d-pico-pi: add OV5645 camera support
  ARM: dts: imx6-display5: replace marvell,88E1510 with ethernet-phy-ieee802.3-c22
  ARM: dts: imx: replace undocumented compatible string edt,edt-ft5x06 with edt,edt-ft5206
  ARM: dts: imx6qdl-tx6: remove undocumented karo,imx6qdl-tx6-sgtl5000 and keep only simple-audio-card
  ARM: dts: imx: Add bus-type for ov5642/ov5640
  ARM: dts: imx: remove redundant bus-width for video-mux
  ARM: dts: imx: add (power|vdd)-supply for related node
  ARM: dts: imx53-ppd: add '#phy-cells' for usb-nop-xceiv
  ARM: dts: imx53-qsb: add dvdd and avdd supply for panel sii,43wvf1g
  ARM: dts: imx: add ti,deskew = <0> for ti,tfp410
  ARM: dts: imx7d: Add Root Port node and PERST property
  ARM: dts: imx6sx: Add Root Port node and PERST property
  ARM: dts: imx6qdl: Add Root Port node and PERST property
  ARM: dts: nxp: imx51-ts4800: Rename wdt node to watchdog
  dt-bindings: watchdog: Convert TS-4800 to DT schema
  ARM: dts: imx6ul: add #io-channel-cells to ADC
  ARM: dts: imx25: remove empty clock-names for nand-controller@bb000000
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

67 files changed, 1143 insertions, 594 deletions

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0023cd126807..1a09b1eefd7e 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -688,7 +688,7 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
-      - description: i.MX6UL Variscite VAR-SOM-MX6 Boards
+      - description: i.MX6UL Variscite VAR-SOM-6UL Boards
         items:
           - const: variscite,mx6ulconcerto
           - const: variscite,var-som-imx6ul
@@ -797,6 +797,12 @@ properties:
           - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL Variscite VAR-SOM-6UL Boards
+        items:
+          - const: variscite,mx6ullconcerto  # Variscite VAR-SOM-6UL dev kit board
+          - const: variscite,var-som-imx6ull # Variscite VAR-SOM-6UL SoM (6ULL variant)
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
index 00bbde203f59..4808065fc911 100644
--- a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -26,8 +26,10 @@ select:
     compatible:
       contains:
         enum:
+          - fsl,aipi-bus
           - fsl,aips
           - fsl,emi
+          - fsl,emi-bus
           - fsl,spba-bus
   required:
     - compatible
@@ -39,8 +41,10 @@ properties:
   compatible:
     items:
       - enum:
+          - fsl,aipi-bus
           - fsl,aips
           - fsl,emi
+          - fsl,emi-bus
           - fsl,spba-bus
       - const: simple-bus
 
diff --git a/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml b/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml
new file mode 100644
index 000000000000..5c2541ac60cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/technologic,ts4800-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Technologic Systems TS-4800 Watchdog
+
+maintainers:
+  - Eduard Bostina <egbostina@gmail.com>
+
+properties:
+  compatible:
+    const: technologic,ts4800-wdt
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the FPGA's syscon
+          - description: Offset to the watchdog register
+    description: Phandle / integers array that points to the syscon node which
+      describes the FPGA's syscon registers.
+
+required:
+  - compatible
+  - syscon
+
+allOf:
+  - $ref: watchdog.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      watchdog {
+        compatible = "technologic,ts4800-wdt";
+        syscon = <&syscon 0xe>;
+        timeout-sec = <10>;
+      };
diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
deleted file mode 100644
index 8f6caad4258d..000000000000
--- a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Technologic Systems Watchdog
-
-Required properties:
-- compatible: must be "technologic,ts4800-wdt"
-- syscon: phandle / integer array that points to the syscon node which
-          describes the FPGA's syscon registers.
-          - phandle to FPGA's syscon
-          - offset to the watchdog register
-
-Optional property:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-syscon: syscon@b0010000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0xb0010000 0x3d>;
-	reg-io-width = <2>;
-
-	wdt@e {
-		compatible = "technologic,ts4800-wdt";
-		syscon = <&syscon 0xe>;
-		timeout-sec = <10>;
-	};
-}
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index 856c9f21bd70..1a2539fa19b4 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -376,6 +376,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ul-var-som-concerto.dtb \
+	imx6ul-var-som-concerto-full.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-aster.dtb \
 	imx6ull-colibri-emmc-aster.dtb \
@@ -414,6 +415,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-tqma6ull2-mba6ulx.dtb \
 	imx6ull-tqma6ull2l-mba6ulx.dtb \
 	imx6ull-uti260b.dtb \
+	imx6ull-var-som-concerto.dtb \
+	imx6ull-var-som-concerto-full.dtb \
 	imx6ulz-14x14-evk.dtb \
 	imx6ulz-bsh-smm-m2.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 94dbcef63b8c..160533b03794 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -618,7 +618,6 @@
 				compatible = "fsl,imx25-nand";
 				reg = <0xbb000000 0x2000>;
 				clocks = <&clks 50>;
-				clock-names = "";
 				interrupts = <33>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index ab7b64639989..314c4f484528 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -369,7 +369,6 @@
 				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
 				reg = <0xbb000000 0x2000>;
 				clocks = <&clks 29>;
-				clock-names = "";
 				interrupts = <33>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
index b17264e06e69..a02e9cd0b3fa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
@@ -126,6 +126,7 @@
 
 	dvi-encoder {
 		compatible = "ti,tfp410";
+		ti,deskew = <0>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
index 5118a68dbbdc..3610ce3951db 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
@@ -155,7 +155,7 @@
 			reg = <0x10000 0x3d>;
 			reg-io-width = <2>;
 
-			wdt {
+			watchdog {
 				compatible = "technologic,ts4800-wdt";
 				syscon = <&syscon 0xe>;
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index 0814f5665a59..02be8b6da696 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -60,6 +60,7 @@
 
 	dvi-converter {
 		compatible = "ti,tfp410";
+		ti,deskew = <0>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
index 6210673f93be..aa1c7e5012c6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
@@ -84,6 +84,7 @@
 		pinctrl-0 = <&pinctrl_display_gpio>;
 		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3p2v>;
 
 		port {
 			panel_in: endpoint {
@@ -98,6 +99,13 @@
 		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usbh1_vbus: regulator-usbh1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
@@ -240,7 +248,7 @@
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06>;
@@ -259,6 +267,7 @@
 	dac@60 {
 		compatible = "microchip,mcp4725";
 		reg = <0x60>;
+		vdd-supply = <&reg_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
index e45a97d3f449..f0fb88c14171 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -258,6 +258,7 @@
 		clock-names = "main_clk";
 		clock-frequency = <24000000>;
 		clocks = <&clks IMX5_CLK_CKO2>;
+		#phy-cells = <0>;
 		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
 		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
 	};
@@ -270,6 +271,7 @@
 
 		clock-frequency = <24000000>;
 		clocks = <&clks IMX5_CLK_CKO2>;
+		#phy-cells = <0>;
 		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
 		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
index 1869ad86baf2..d3b27dc3c2c7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -91,6 +91,8 @@
 		pinctrl-0 = <&pinctrl_display_power>;
 		backlight = <&backlight_parallel>;
 		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		dvdd-supply = <&reg_3p2v>;
+		avdd-supply = <&reg_5v>;
 
 		port {
 			panel_in: endpoint {
@@ -107,6 +109,14 @@
 		regulator-always-on;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	reg_usb_vbus: regulator-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
index e395004e80e6..34cb0c344ff6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
@@ -10,6 +10,7 @@
 / {
 	panel: panel-rgb {
 		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&reg_5v>;
 
 		port {
 			panel_rgb_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
index 1a00d290092a..ebec88495877 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
@@ -29,6 +29,13 @@
 		reg = <0x70000000 0x20000000>;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reg_usb1_vbus: regulator-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
index a1e19f9709b2..8c02731c7ba9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 #include "imx53.dtsi"
 
 / {
@@ -314,6 +315,7 @@
 		port {
 			ov5642_to_ipu_csi0: endpoint {
 				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 				bus-width = <8>;
 				hsync-active = <1>;
 				vsync-active = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
index 872cf7e16f20..6a1063c455f0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
@@ -201,7 +201,7 @@
 	};
 
 	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
index 9ea23dd54f3c..62b05fe70cd9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
@@ -32,12 +32,10 @@
 };
 
 &ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
index 182e8194c249..c1787510d394 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
@@ -32,12 +32,10 @@
 };
 
 &ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
index a106c4e3e329..934b0325e6f5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
@@ -32,12 +32,10 @@
 };
 
 &ipu1_csi1_from_ipu1_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index 4e448b4810f2..21e8bbdab4e6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -208,7 +208,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		ethernet_phy0: ethernet-phy@0 {
-			compatible = "marvell,88E1510";
+			compatible = "ethernet-phy-ieee802.3-c22";
 			device_type = "ethernet-phy";
 			/* Set LED0 control: */
 			/* On - Link, Blink - Activity, Off - No Link */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
index 6e1c493c9c8c..31996ddde117 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
@@ -32,12 +32,10 @@
 };
 
 &ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu2_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu2_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
index f13df8e9c8c4..f224273fa863 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
@@ -32,12 +32,10 @@
 };
 
 &ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu2_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu2_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
index d5d46908cf6e..804ee044be52 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
@@ -90,12 +90,10 @@
 };
 
 &ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <16>;
 };
 
 &ipu1_csi0_mux_from_parallel_sensor {
 	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
-	bus-width = <16>;
 };
 
 &ipu1_csi0 {
@@ -104,12 +102,10 @@
 };
 
 &ipu2_csi1_from_ipu2_csi1_mux {
-	bus-width = <8>;
 };
 
 &ipu2_csi1_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
-	bus-width = <8>;
 };
 
 &ipu2_csi1 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 24fc3ff1c70c..cd9a050fa906 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -109,6 +109,7 @@
 	panel: panel {
 		compatible = "innolux,n133hse-ea1";
 		backlight = <&backlight>;
+		power-supply = <&reg_lvds_lcd>;
 	};
 
 	reg_2p5v: regulator-2p5v {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
index c78f101c3cc1..c69052d776e3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -61,6 +61,7 @@
 
 	encoder {
 		compatible = "ti,tfp410";
+		ti,deskew = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -323,19 +324,10 @@
 	remote-endpoint = <&parallel_display_in>;
 };
 
-&pcie {
-	pcie@0,0 {
-		reg = <0x000000 0 0 0 0>;
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		ranges;
-
-		/* non-removable i211 ethernet card */
-		eth1: ethernet@0,0 {
-			reg = <0x010000 0 0 0 0>;
-		};
+&pcie_port0 {
+	/* non-removable i211 ethernet card */
+	eth1: ethernet@0,0 {
+		reg = <0x010000 0 0 0 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
index 0225a621ec7a..ccf6a048c918 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
@@ -169,7 +169,7 @@
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index beff5a0f58ab..fb18b87adb44 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -384,12 +384,10 @@
 };
 
 &ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi0_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 6136a95b9259..55647c1dacfa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -440,12 +440,10 @@
 };
 
 &ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <16>;
 };
 
 &ipu1_csi0_mux_from_parallel_sensor {
 	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
-	bus-width = <16>;
 };
 
 &ipu1_csi0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index 552114a69f5b..bdbcad5e35d8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -397,12 +397,10 @@
 };
 
 &ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi0_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
index 610b2a72fe82..cebfd622df68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -256,7 +256,7 @@
 	};
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index ef0c26688446..f8a7218b13ef 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -405,7 +405,7 @@
 	};
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 03fe053880ca..fb1c923c46bc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -326,7 +326,7 @@
 	};
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
index 6a353a99e13d..9fe52e0ca7aa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -333,7 +333,7 @@
 	};
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
index c39a9ebdaba1..ca4cb986efbc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
@@ -217,7 +217,7 @@
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index b9dde0af3b99..40d8887cb8bc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -245,12 +245,10 @@
 };
 
 &ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
 };
 
 &ipu1_csi0_mux_from_parallel_sensor {
 	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
 };
 
 &ipu1_csi0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index ba29720e3f72..fe9046c03ddd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -754,11 +754,16 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index 57297d6521cf..fe25934e06b1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -148,8 +148,7 @@
 	};
 
 	sound {
-		compatible = "karo,imx6qdl-tx6-sgtl5000",
-			     "simple-audio-card";
+		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_audmux>;
@@ -293,7 +292,7 @@
 	};
 
 	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 4dc2c410cf61..9438862b9927 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -302,6 +302,17 @@
 				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy";
 			status = "disabled";
+
+			pcie_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		aips1: bus@2000000 { /* AIPS1 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
index c5b220aeaefd..6b12cab7175f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
@@ -45,10 +45,15 @@
 };
 
 &pcie {
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 3e238d8118fa..338de4d144b2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -282,11 +282,16 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie_gpio>;
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+};
+
 &lcdif1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcd>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index aefae5a3a6be..5484c398aa37 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -1470,6 +1470,17 @@
 			power-domains = <&pd_disp>, <&pd_pci>;
 			power-domain-names = "pcie", "pcie_phy";
 			status = "disabled";
+
+			pcie_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 3d147b160ecf..32afe4130e21 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -217,6 +217,7 @@
 		port {
 			ov5640_to_parallel: endpoint {
 				remote-endpoint = <&parallel_from_ov5640>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 				bus-width = <8>;
 				data-shift = <2>; /* lines 9:2 are used */
 				hsync-active = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
index bf7dbb4f1f3e..e99ba04216b8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
@@ -62,7 +62,7 @@
 	status = "okay";
 
 	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
index 6cfc943a8fa3..f79090fb2e6e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index 1992dfb53b45..192c6a95ae58 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -317,7 +317,7 @@
 	};
 
 	polytouch: polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi
new file mode 100644
index 000000000000..3c480bc7a6ad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-audio.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Audio support for Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+&iomuxc {
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
new file mode 100644
index 000000000000..5600eeaa5854
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for the common parts shared by all the different CPU options on
+ * Variscite VAR-SOM-6UL Module
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Variscite VAR-SOM-6UL module";
+	compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_gpio_dvfs: reg-gpio-dvfs {
+		compatible = "regulator-gpio";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-name = "gpio_dvfs";
+		regulator-type = "voltage";
+		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		states = <1300000 0x1
+			  1400000 0x0>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi
new file mode 100644
index 000000000000..e5637310ba63
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-common.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL
+ * Variscite SoM mounted on it (all CPU variants)
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
+
+		key-back {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-wakeup {
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "gpled2";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_panel: lvds-panel {
+		compatible = "sgd,gktw70sdae4se", "panel-lvds";
+		data-mapping = "jeida-18";
+		width-mm = <153>;
+		height-mm = <86>;
+
+		panel-timing {
+			clock-frequency = <35000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <40>;
+			hfront-porch = <40>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <48>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		/*
+		 * To actually use this interrupt
+		 * connect pins J14.8 & J14.10 on the Concerto-Board.
+		 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_key_back: gpio-key-backgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x17059
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x1b0b0	/* GPLED2 */
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0 /* RTC alarm IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B	0x78b0
+		>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&tsc {
+	/*
+	 * Conflics with wdog1 ext-reset-output & SD CD pins,
+	 * so we keep it disabled by default.
+	 */
+	status = "disabled";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* ttymxc4 UART */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	/*
+	 * To actually use ext-reset-output
+	 * connect pins J17.3 & J17.8 on the Concerto-Board
+	 */
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts
new file mode 100644
index 000000000000..725f34d6b7ee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL
+ * Variscite SoM mounted on it (6UL CPU variant).
+ *
+ * Copyright 2026 Dimonoff
+ */
+
+/dts-v1/;
+
+#include "imx6ul-var-som.dtsi"
+#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-wifi.dtsi"
+#include "imx6ul-var-som-enet2.dtsi"
+#include "imx6ul-var-som-enet1.dtsi"
+#include "imx6ul-var-som-audio.dtsi"
+#include "imx6ul-var-som-lvds-panel.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)";
+	compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
index 9ff3b374a2b3..c249e15772b8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
@@ -1,320 +1,22 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL
- * Variscite SoM mounted on it
+ * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL
+ * Variscite SoM mounted on it (6UL CPU variant)
  *
  * Copyright 2019 Variscite Ltd.
  * Copyright 2025 Bootlin
  */
 
+/dts-v1/;
+
 #include "imx6ul-var-som.dtsi"
-#include <dt-bindings/leds/common.h>
+#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-sd.dtsi"
+#include "imx6ul-var-som-enet2.dtsi"
+#include "imx6ul-var-som-audio.dtsi"
+#include "imx6ul-var-som-lvds-panel.dtsi"
 
 / {
-	model = "Variscite VAR-SOM-MX6UL Concerto Board";
+	model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)";
 	compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
-
-		key-back {
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		key-wakeup {
-			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-0 {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			label = "gpled2";
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&fec1 {
-	status = "disabled";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@3 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <3>;
-			clocks = <&rmii_ref_clk>;
-			clock-names = "rmii-ref";
-			reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <100000>;
-			micrel,led-mode = <0>;
-			micrel,rmii-reference-clock-select-25-mhz = <1>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@68 {
-		/*
-		 * To actually use this interrupt
-		 * connect pins J14.8 & J14.10 on the Concerto-Board.
-		 */
-		compatible = "dallas,ds1337";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&iomuxc {
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2_gpio: enet2-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* fec2 reset */
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio_key_back: gpio-key-backgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x17059
-		>;
-	};
-
-	pinctrl_gpio_leds: gpio-ledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x1b0b0	/* GPLED2 */
-		>;
-	};
-
-	pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17059
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_rtc: rtcgrp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0 /* RTC alarm IRQ */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
-		>;
-	};
-
-	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x1b0b1 /* CD */
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B	0x78b0
-		>;
-	};
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&snvs_rtc {
-	status = "disabled";
-};
-
-&tsc {
-	/*
-	 * Conflics with wdog1 ext-reset-output & SD CD pins,
-	 * so we keep it disabled by default.
-	 */
-	status = "disabled";
-};
-
-/* Console UART */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* ttymxc4 UART */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	disable-over-current;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	/*
-	 * To actually use ext-reset-output
-	 * connect pins J17.3 & J17.8 on the Concerto-Board
-	 */
-	fsl,ext-reset-output;
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi
new file mode 100644
index 000000000000..6b1e34347bec
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet1.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ethernet ENET1 support for Variscite VAR-SOM-6UL module with
+ * the EC configuration option ((ethernet PHY assembled on SOM).
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+};
+
+&mdio_enet2 {
+	ethphy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		clocks = <&rmii_ref_clk>;
+		clock-names = "rmii-ref";
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <100000>;
+		micrel,led-mode = <1>;
+		micrel,rmii-reference-clock-select-25-mhz;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi
new file mode 100644
index 000000000000..b29fcdc079e3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-enet2.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ethernet ENET2 support for Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+/ {
+	rmii_ref_clk: rmii-ref-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "rmii-ref";
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio_enet2: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <1>;
+			micrel,rmii-reference-clock-select-25-mhz;
+		};
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <0>;
+			micrel,rmii-reference-clock-select-25-mhz;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2_gpio: enet2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* fec2 reset */
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi
new file mode 100644
index 000000000000..996b37d35d6e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-lvds-panel.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * LVDS panel support for Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+/ {
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 2000000 0>;
+		pwm-names = "LCD_BKLT_PWM";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds93", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_enc_in: endpoint {
+					remote-endpoint = <&lcdif_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_enc_out: endpoint {
+					remote-endpoint = <&lvds_panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0 /* LCD BACKLIGHT */
+		>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lvds_enc_in>;
+		};
+	};
+};
+
+&lvds_panel {
+	status = "okay";
+
+	port {
+		lvds_panel_in: endpoint {
+			remote-endpoint = <&lvds_enc_out>;
+		};
+	};
+};
+
+/* PWM LCD */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi
new file mode 100644
index 000000000000..0e6d9b945eb4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-sd.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support optional SD card interface on Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+&iomuxc {
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x1b0b1 /* CD */
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi
new file mode 100644
index 000000000000..6d16ff7909da
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support optional Wifi/Bluetooth on Variscite VAR-SOM-6UL module.
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+/ {
+	reg_sd1_vmmc: regulator_sd1_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VMMC1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <10000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_wifi>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_32k_clk: 32kclkgrp {
+		/*
+		 * For TP option, an additional oscillator is assembled on the
+		 * SOM to provide 32 kHz to the WiFi module. Without TP option,
+		 * this pin is configured to provide the 32 KHz clock to the
+		 * WiFi module.
+		 */
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x03029
+		>;
+	};
+};
+
+&tsc {
+	status = "disabled";
+};
+
+/* Bluetooth UART */
+&uart2 {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_bt>;
+		shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_32k_clk>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_32k_clk>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_32k_clk>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac"; /* LWB option: Sterling LWB5 */
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
index 4e536e0252de..feea24c0e068 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Support for Variscite VAR-SOM-MX6UL Module
+ * Support for Variscite VAR-SOM-6UL Module
  *
  * Copyright 2019 Variscite Ltd.
  * Copyright 2025 Bootlin
@@ -9,225 +9,30 @@
 /dts-v1/;
 
 #include "imx6ul.dtsi"
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "imx6ul-var-som-common.dtsi"
 
 / {
-	model = "Variscite VAR-SOM-MX6UL module";
+	model = "Variscite VAR-SOM-6UL module";
 	compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reg_gpio_dvfs: reg-gpio-dvfs {
-		compatible = "regulator-gpio";
-		regulator-min-microvolt = <1300000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-name = "gpio_dvfs";
-		regulator-type = "voltage";
-		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-		states = <1300000 0x1
-			  1400000 0x0>;
-	};
-
-	rmii_ref_clk: rmii-ref-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "rmii-ref";
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&cpu0 {
-	dc-supply = <&reg_gpio_dvfs>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			clocks = <&rmii_ref_clk>;
-			clock-names = "rmii-ref";
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <100000>;
-			micrel,led-mode = <1>;
-			micrel,rmii-reference-clock-select-25-mhz = <1>;
-		};
-	};
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet1_gpio: enet1-gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
+	pinctrl_brcm_bt: brcm-bt-grp {
 		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT Enable */
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x03029	/* WLAN Enable */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT_REG_ON (BT_EN) */
 		>;
 	};
 
-	pinctrl_sai2: sai2grp {
+	pinctrl_brcm_wifi: brcm-wifi-grp {
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* WL_PWR (WIFI_PWR 5G) */
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0	/* WL_REG_ON (WIFI_EN) */
 		>;
 	};
 
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	pinctrl_enet1_gpio: enet1-gpiogrp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
 		>;
 	};
 };
-
-&pxp {
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			  <&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <12288000>;
-	fsl,sai-mclk-direction-output;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xfff>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index 24541fdf49ce..d2bfa08b5e76 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -951,6 +951,7 @@
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ADC1>;
 				clock-names = "adc";
+				#io-channel-cells = <1>;
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts
new file mode 100644
index 000000000000..1b7c1a3383ee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL
+ * Variscite SoM mounted on it (6ULL CPU variant).
+ *
+ * Copyright 2026 Dimonoff
+ */
+
+/dts-v1/;
+
+#include "imx6ull-var-som.dtsi"
+#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-wifi.dtsi"
+#include "imx6ul-var-som-enet2.dtsi"
+#include "imx6ul-var-som-enet1.dtsi"
+#include "imx6ul-var-som-audio.dtsi"
+#include "imx6ul-var-som-lvds-panel.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)";
+	compatible = "variscite,mx6ullconcerto", "variscite,var-som-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts
new file mode 100644
index 000000000000..9c9d16eb1a11
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite Concerto Carrier board with the VAR-SOM-6UL
+ * Variscite SoM mounted on it (6ULL CPU variant)
+ *
+ * Copyright 2026 Dimonoff
+ */
+
+/dts-v1/;
+
+#include "imx6ull-var-som.dtsi"
+#include "imx6ul-var-som-concerto-common.dtsi"
+#include "imx6ul-var-som-sd.dtsi"
+#include "imx6ul-var-som-enet2.dtsi"
+#include "imx6ul-var-som-audio.dtsi"
+#include "imx6ul-var-som-lvds-panel.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)";
+	compatible = "variscite,mx6ullconcerto", "variscite,var-som-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi
new file mode 100644
index 000000000000..f120b1dca75c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-6UL module with imx6ull CPU
+ *
+ * Copyright 2019-2024 Variscite Ltd.
+ * Copyright 2026 Dimonoff
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-var-som-common.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-6UL module";
+	compatible = "variscite,var-som-imx6ull", "fsl,imx6ull";
+};
+
+&iomuxc {
+	pinctrl_brcm_bt: brcm-bt-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT_REG_ON (BT_EN) */
+		>;
+	};
+
+	pinctrl_brcm_wifi: brcm-wifi-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* WL_PWR (WIFI_PWR 5G) */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0	/* WL_REG_ON (WIFI_EN) */
+		>;
+	};
+
+	pinctrl_enet1_gpio: enet1-gpiogrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index f3d7a2d0cb7b..e1f740edfb76 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -151,6 +151,16 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		vcc-supply = <&vgen4_reg>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			module_info: module-info@20 {
+				reg = <0x20 0x60>;
+			};
+		};
 	};
 
 	at24c02: eeprom@56 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 347dd0fe4f82..fca8aab9d850 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -70,7 +70,7 @@
 	};
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
index 62221131336f..7a0e4dc5450e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
@@ -19,6 +19,13 @@
 		};
 	};
 
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -49,7 +56,7 @@
 
 &i2c4 {
 	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
@@ -59,6 +66,33 @@
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+
+		clocks = <&clks IMX7D_CLKO1_ROOT_DIV>;
+		assigned-clocks = <&clks IMX7D_CLKO1_ROOT_DIV>;
+		assigned-clock-rates = <24000000>;
+
+		enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+
+		vdda-supply = <&reg_2p5v>;
+		vdddo-supply = <&reg_vref_1v8>;
+		vddd-supply = <&reg_1p5v>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
 };
 
 &usdhc1 {
@@ -93,5 +127,37 @@
 			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
 		>;
 	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x15
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x15
+			MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1	0x7d
+		>;
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			mipi_csi2_in: endpoint {
+				remote-endpoint = <&ov5645_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
 
+&video_mux {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
index a370e868cafe..0046b276b8b9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
@@ -456,10 +456,15 @@
 };
 
 &pcie {
+	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&extended_io 1 GPIO_ACTIVE_LOW>;
+};
+
 &reg_1p0d {
 	vin-supply = <&sw2_reg>;
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
index d961c61a93af..3c5c1f2c1460 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -155,6 +155,17 @@
 			reset-names = "pciephy", "apps", "turnoff";
 			fsl,imx7d-pcie-phy = <&pcie_phy>;
 			status = "disabled";
+
+			pcie_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
index 1355feda1aa7..39e37ae9b2b1 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
@@ -325,6 +325,18 @@
 			clock-names = "divcore", "hsrun_divcore";
 		};
 
+		wdog2: watchdog@40430000 {
+			compatible = "fsl,imx7ulp-wdt";
+			reg = <0x40430000 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_WDG2>;
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG2>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			timeout-sec = <40>;
+			status = "disabled";
+			bootph-all;
+		};
+
 		pcc3: clock-controller@40b30000 {
 			compatible = "fsl,imx7ulp-pcc3";
 			reg = <0x40b30000 0x10000>;