diff options
| author | Loic Poulain <loic.poulain@oss.qualcomm.com> | 2026-01-08 20:05:49 +0300 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2026-01-09 00:33:28 +0300 |
| commit | 141f384413fbeada38f3fa46e2beed9bf8c0f6fe (patch) | |
| tree | 6d4a15da94e20a2d26336c2f78175f7cc7089667 | |
| parent | 165287f761aaf7f5c2d4d8b19343569b6a26f8bf (diff) | |
| download | linux-141f384413fbeada38f3fa46e2beed9bf8c0f6fe.tar.xz | |
arm64: dts: qcom: qrb2210-rb1: Add PM8008 node
The PM8008 device is a dedicated camera PMIC integrating all the necessary
camera power management features.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260108170550.359968-3-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 75 |
1 files changed, 75 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 1b9ca957a94b..9814ac4896c5 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -267,6 +267,81 @@ firmware-name = "qcom/qcm2290/a702_zap.mbn"; }; +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&pm4125_s3>; + vdd-l3-l4-supply = <&vph_pwr>; + vdd-l5-supply = <&vph_pwr>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-supply = <&vph_pwr>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + status = "disabled"; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3404000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + &i2c2_gpio { clock-frequency = <400000>; status = "okay"; |