arm64: dts: qcom: kaanapali-mtp: Enable display DSI devices

Enable MDSS/DPU/DSI0 and add Novatek NT37801 panel on Kaanapali MTP
board.

NT37801 Spec V1.0 chapter "5.7.1 Power On Sequence" states VDDI ranges
1.65V~1.95V, but ldo12 ranges 1.2V~1.8V, so change ldo12 range to
1.65V~1.8V.

pmh0110_d_e0_gpios and pmh0110_f_e0_gpios are configured for
level shifters. Kaanapali need configure these pinctrl for panel
function.

Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260322-knp-pmic-dt-v1-6-70bc40ea4428@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

1 files changed, 117 insertions, 1 deletions

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index d0f3909621c9..07247dc98b70 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -375,7 +375,7 @@
 
 		vreg_l12b_1p8: ldo12 {
 			regulator-name = "vreg_l12b_1p8";
-			regulator-min-microvolt = <1200000>;
+			regulator-min-microvolt = <1650000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 			regulator-allow-set-load;
@@ -873,6 +873,51 @@
 	qcom,dmic-sample-rate = <4800000>;
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l1d_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "novatek,nt37801";
+		reg = <0>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active &sde_esync0_suspend
+			     &sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active
+			     &sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend &sde_esync0_suspend
+			     &sde_mdp_vsync_p_1p2_active &sde_mdp_vsync_p_1p8_active
+			     &sde_disp0_rst_1p2_active &sde_disp0_rst_1p8_active>;
+		pinctrl-names = "default", "sleep";
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p0>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l3d_0p8>;
+
+	status = "okay";
+};
+
 &pcie0 {
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
@@ -970,6 +1015,42 @@
 	};
 };
 
+&pmh0110_d_e0_gpios {
+	sde_mdp_vsync_p_1p2_active: sde-mdp-vsync-p-1p2-active-state {
+		pins = "gpio9";
+		function = "paired";
+		input-disable;
+		output-enable;
+		power-source = <2>; /* 1.2v */
+	};
+
+	sde_mdp_vsync_p_1p8_active: sde-mdp-vsync-p-1p8-active-state {
+		pins = "gpio10";
+		function = "paired";
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8v */
+	};
+};
+
+&pmh0110_f_e0_gpios {
+	sde_disp0_rst_1p2_active: sde-disp0-rst-1p2-active-state {
+		pins = "gpio9";
+		function = "paired";
+		input-enable;
+		output-disable;
+		power-source = <2>; /* 1.2v */
+	};
+
+	sde_disp0_rst_1p8_active: sde-disp0-rst-1p8-active-state {
+		pins = "gpio10";
+		function = "paired";
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8v */
+	};
+};
+
 &pon_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 
@@ -1128,6 +1209,41 @@
 		bias-disable;
 	};
 
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_esync0_suspend: sde-esync0-suspend-state {
+		pins = "gpio88";
+		function = "mdp_esync0_out";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	key_vol_up_default: key-vol-up-default-state {
 		pins = "gpio101";
 		function = "gpio";