[ARM] pxa: move UART register definitions into dedicated regs-uart.h

Signed-off-by: Eric Miao <eric.miao@marvell.com>

6 files changed, 154 insertions, 150 deletions

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 541940b5d794..4db449258976 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -156,8 +156,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
 
 static struct resource pxa_resource_ffuart[] = {
 	{
-		.start	= __PREG(FFUART),
-		.end	= __PREG(FFUART) + 35,
+		.start	= 0x40100000,
+		.end	= 0x40100023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_FFUART,
@@ -175,8 +175,8 @@ struct platform_device pxa_device_ffuart= {
 
 static struct resource pxa_resource_btuart[] = {
 	{
-		.start	= __PREG(BTUART),
-		.end	= __PREG(BTUART) + 35,
+		.start	= 0x40200000,
+		.end	= 0x40200023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_BTUART,
@@ -194,8 +194,8 @@ struct platform_device pxa_device_btuart = {
 
 static struct resource pxa_resource_stuart[] = {
 	{
-		.start	= __PREG(STUART),
-		.end	= __PREG(STUART) + 35,
+		.start	= 0x40700000,
+		.end	= 0x40700023,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_STUART,
@@ -213,8 +213,8 @@ struct platform_device pxa_device_stuart = {
 
 static struct resource pxa_resource_hwuart[] = {
 	{
-		.start	= __PREG(HWUART),
-		.end	= __PREG(HWUART) + 47,
+		.start	= 0x41600000,
+		.end	= 0x4160002F,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IRQ_HWUART,
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index ab62f6c11e0e..cb9b46de97cc 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -123,147 +123,6 @@
 #define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-
 /*
  * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
  */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
new file mode 100644
index 000000000000..55aeb7fb72f6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-uart.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARCH_REGS_UART_H
+#define __ASM_ARCH_REGS_UART_H
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 21e3e890af98..a9a4f302b6ef 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,7 +10,7 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
 #define __REG(x)       ((volatile unsigned long *)x)
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 06f448a37ca0..ba445133f3eb 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -25,6 +25,7 @@
 #include <asm/dma.h>
 #include <mach/irda.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 
 #define FICP		__REG(0x40800000)  /* Start of FICP area */
 #define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index abc00be55433..a793d1fa1cde 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -48,6 +48,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-uart.h>
 
 
 struct uart_pxa_port {