| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace existing checks against L"." and L".." by
a named function.
No functional change.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
|
|
Make use the newly introduced ShellPrintDefaultEx() alias and
replace wherever it is possible:
- "ShellPrintEx (-1, -1,"
with:
- "ShellPrintDefaultEx ("
No functional change is introduced.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
|
|
Having StrLen(Buffer) == 0 results in a Buffer underflow.
Also, StrLen iterates over the Buffer elements until finding a NULL
character. This results in a quadratic search for '\r' characters
in the while loop.
Fix these issues.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
|
|
InternalShellIsHexOrDecimalNumber() would fail to interpret e.g. "0 " or
"00 " as valid numeric strings. After skipping the "0" digits as
leading zeroes, it would check if the next character is a valid hex or
decimal digit, which would then fail on the terminating character.
Therefore return success if "leading" zeroes have been consumed and
there are no more characters.
InternalShellStrHexToUint64() would fail to interpret e.g. "0 " or "00 "
as valid numeric strings. After skipping the "0" digits as leading
zeroes, it would find itself surprised by the following space.
Restrict the "bad space" check to the case where it had just consumed
the "x" or "X" marker. Otherwise the space is fine (depending on
StopAtSpace either end of number or interspersed space) since there
were only zeroes so far.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3080
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
|
|
The ShellConvertStringToUint64() function documentation says:
"Upon a successful return the value of the conversion."
So do not write any value if the conversion failed.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
|
|
StrSize() uses StrLen() which counts until the terminating NULL
character.
For checking for an empty string it is more efficient to directly check
for the NULL terminator instead of calling StrSize().
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
|
|
StrSize() will never return zero since it counts the terminating NULL
character.
An empty string will have the storage size of the terminator.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
|
|
If InternalShellStrHexToUint64() is passed a string that starts with 'X'
or 'x' it would try to read the byte before the start of the string
buffer.
Instead check if leading zeroes have been consumed.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
|
|
Includes changes across the module for the following CodeQL rules:
- cpp/comparison-with-wider-type
- cpp/overflow-buffer
- cpp/redundant-null-check-param
- cpp/uselesstest
Co-authored-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
|
|
begining->beginning
dirve->drive
duplicat->duplicate
fuly->fully
Funciton->Function
Functino->Function
optioanl->optional
poitners->pointers
rountine->routine
sucessful->successful
sucessfully->successfully
Signed-off-by: Page Chen <paiching_chen@apple.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Message-Id: <829d2bed2a848229d719d7ae7b64ef1a47782720.1699557986.git.paiching_chen@apple.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
Increase max buffer size to support more than 64K.
Signed-off-by: Giri Mudusuru <girim@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ShellPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2361
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
The EDK 1 Shell (available at <https://github.com/tianocore/edk-Shell>)
has a bug in its EFI_SHELL_ENVIRONMENT2.Execute() implementation that
edk2's UefiShellLib has no choice but to work around.
Improve the explanation in the code. Also, document the implicit
EFI_HANDLE -> (EFI_HANDLE*) conversion, which happens implicitly after
dereferencing ParentHandle, with an explicit cast.
In practice, this patch is a no-op.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
The UefiShell*CommandsLib instances have constructor functions that do
something like:
gHiiHandle = HiiAddPackages (...);
...
ShellCommandRegisterCommandName (..., gHiiHandle, ...);
and destructor functions that implement the following pattern:
HiiRemovePackages (gHiiHandle);
The -- semantic, not functional -- problem is that "gHiiHandle" is
declared with type EFI_HANDLE, and not EFI_HII_HANDLE, in all of these
library instances, even though HiiAddPackages() correctly returns
EFI_HII_HANDLE, and HiiRemovePackages() takes EFI_HII_HANDLE.
Once we fix the type of "gHiiHandle", it causes sort of a butterfly
effect, because it is passed around widely. Track down and update all of
those locations.
The DynamicCommand lib instances use a similar pattern, so they are
affected too.
NOTE: in practice, this patch is a no-op, as both EFI_HII_HANDLE and
EFI_HANDLE are typedefs to (VOID*). However, we shouldn't use EFI_HANDLE
where semantically EFI_HII_HANDLE is passed around.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1906
While failed to allocate memory to save the response,
set the input/output parameter 'Response'(VOID **) to
NULL to indicate the failure not only depend on the
returned status.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Substitute InternalShellCharToUpper with CharToUpper which is a public
function with the same effect.
Remove the implement of InternalShellCharToUpper.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1310
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Add a function to return a clean, fully-qualified version of some path.
This function handles a (possibly "dirty") input path that may or may
not include a file system reference.
If it does not include a file system reference, then if the input path
does not begin with a forward or backward slash, then the input path is
relative to the current working directory of the current file system.
Otherwise, it is an absolute path within the current file system.
If it does include a file system reference, it may be a reference to the
current or some other file system. If the file system reference is not
immediately followed by a forward or backward slash, then the input path
is relative to the current working directory of the given file system.
Otherwise, it is an absolute path within the given file system.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Replace the "old shell method" implementation in
ShellOpenFileByDevicePath() with EfiOpenFileByDevicePath() from UefiLib,
correcting the following issues:
- code duplication between this module and other modules,
- local variable name "EfiSimpleFileSystemProtocol" starting with "Efi"
prefix,
- bogus "FileHandle = NULL" assignments,
- leaking "Handle1" when the device path type/subtype check or the
realignment-motivated AllocateCopyPool() fails in the loop.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
The ShellOpenFileByDevicePath() API promises to set the DeviceHandle
output parameter to the handle of the filesystem identified by the
FilePath input parameter. However, this doesn't actually happen when the
UEFI Shell 2.0 method is used (which is basically "always" nowadays).
Accordingly, the only caller of ShellOpenFileByDevicePath(), namely
ShellOpenFileByName(), defines a (dummy) local DeviceHandle variable just
so it can call ShellOpenFileByDevicePath().
Remove the useless output parameter.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1008
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
InternalShellIsHexOrDecimalNumber() wrongly treats "-" as a number.
The patch fixes this issue.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=730
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
The previous change in ShellLib: "commit
3d29f8c5e361525a0d2accfa7f5bb0a7210b8927
* ShellPkg/ShellLib: Constructor doesn't depend on ShellParameters"
resolved the issue when loading dynamic command driver from Shell
environment.
But when dynamic command driver is built into FV and started during
boot, the driver still fails to start because Shell protocol doesn't
exist at that time.
The patch changes ShellLib to:
1. Do not look for Shell and ShellParameters protocol when they are
non-NULL in ShellLibConstructorWorker();
The two protocols are assumed to be set by DynamicCommand.Handler.
When ShellInitialize() is called in DynamicCommand.Handler, this
change can prevent the two protocols to be changed to NULL by
the locating logic.
2. Do not reset the Shell and ShellParameters protocol to NULL in
ShellLibDestructor() when CloseProtocol() fails;
Dynamic command driver needs to set the PcdShellLibAutoInitialize
to FALSE in order to skip the constructor.
Current logic calls ShellLibDestructor() when the PCD is FALSE when
ShellInitialize() is called. The change prevent the two protocols
to be changed to NULL.
The two changes don't impact existing usage case so they are backward
compatible.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
When ShellLib is linked to a driver producing DynamicCommand
protocol, ShellParameters protocol is set by
DynamicCommand.Handler().
The driver image handle doesn't have ShellParameters protocol
installed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
|
|
V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Some developers/QAs complain the color of directory or executable
files is hard to see and suggest to use a more bright color.
I agree with this suggestion so make this patch.
The look and feel is much better now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
MAX_FILE_NAME_LEN and FIND_XXXXX_FILE_BUFFER_SIZE are not used
by ShellLib so remove them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=566
In function InternalShellPrintWorker(), if the string in variable
'mPostReplaceFormat2' starts with character L'%', the following
expression:
*(ResumeLocation-1) == L'^' at line 2831
will read an undefined value before the starting of string
'mPostReplaceFormat2'.
This commit adds additional logic to avoid reading undefined content.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
When copy command prompts to overwrite an existing file, pressing
backspace continuously removes everything including the shell prompt.
So print only valid characters for file overwrite prompt.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
|
|
In ShellOpenFileByName() the file is opened using
gEfiShellProtocol->OpenFileByName().
It is supposed that if this call returns an EFI_ERROR, the function
should return that error immediately. However, this return was missing,
and if UnicodeCollationProtocol has not been located by this time, the
Status gets overwritten with LocateProtocol() call result, which
eventually erroneously returns EFI_SUCCESS to the Shell.c, and this
leads to attempt to execute a non-existent startup script, which fails,
and which in turn leads to Shell being unloaded with "Invalid parameter"
error. This patch fixes the bug.
Cc: Tapan Shah <tapandshah@hpe.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Move gEfiUnicodeCollation2ProtocolGuid protocol outside of UefiShellLib constructor
function.
Locate gEfiUnicodeCollation2ProtocolGuid protocol in ShellOpenFileByName() which
consumes this protocol API.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
As per ECR 1349 change in UEFI Shell Specification 2.2, expanding
a special output file name to include "NULL". Previously it only
supported "NUL" as a special output file and it was case sensitive.
With this change both "NUL" and "NULL" are special output file and
checked as case insensitive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-By: Jaben Carsey <jaben.carsey@intel.com>
|
|
When ASSERT_EFI_ERROR() is compiled out, dependent on build flags, only
the status checking should be removed; the function calls should stay.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Do NULL pointer check before the pointer is used to avoid dereferenced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
When the last line in a script file is not an empty line the Shell
will not execute the command in the last line. The patch refine the
logic in function 'ShellFileHandleReturnLine' and fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
|
|
An earlier change had this function returning the type of lines that were in
the file being read (ASCII or UCS2). The way it is used, UCS2 output is
expected, even when the file being read is ASCII. This change restores that
behavior and documents it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <Jim_Dailey@Dell.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Fix various errors when piping a UNICODE or ASCII file to a simple shell application that reads standard input and writes it to standard output.
1) When the memory file is created by CreateFileInferfaceMem() to capture the pipe output, no UNICODE BOM is written to the memory file. Later, when the memory file is read by the application using ShellFileHandleReadLine(), the function indicates that the file is ASCII because there is no BOM.
2) If the file is piped as ASCII, the ASCII memory image is not correctly created by FileInterfaceMemWrite() as each ASCII character is followed by '\0' in the image (when the ASCII data is written to the memory image, the file position should only be incremented by half the buffer size).
3) ShellFileHandleReadLine() does not read ASCII files correctly (writes to Buffer need to be cast as CHAR8*).
4) FileInterfaceMemRead() and FileInterfaceMemWrite() as somewhat hard to read and difficult to debug with certain tools due to the typecasting of This. Added a local variable (MemFile) of the correct type to these functions and used it instead of This.
Enhancement: ShellFileHandleReadLine() now returns EFI_END_OF_FILE when appropriate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yao Jiewen <Jiewen.Yao@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19524 6f19259b-4bc3-4df7-8a09-765794883524
|
