| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This makes sure the set of devices for ConOut and ErrOut is identical.
Without this things get a bit messy because ConSplitterDxe can not deal
very well with the situation that a ConOut + ErrOut share some but not
all devices (i.e. vga + serial for ConOut and serial only for ErrOut).
It ends up running ConOut in 128x40 and ErrOut in 80x50 mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The virtio input device can be used to create virtual human interface
devices such as mice and tablets, not just keyboards. Rename
VirtioKeyboardDxe to VirtioInputDxe for adding virtio-mouse and
virtio-tablet support in following commits.
No functional change.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Jiaqing Zhao <Zhao.Jiaqing@amd.com>
|
|
Replace traditional `#ifndef`/`#define`/`#endif` include guards with
`#pragma` once.
`#pragma once` is a widely supported preprocessor directive that
prevents header files from being included multiple times. It is
supported by all toolchains used to build edk2: GCC, Clang/LLVM, and
MSVC.
Note: Headers taken directly from external projects, such as those
in OvmfPkg/Include/IndustryStandard/Xen/ were not modified since they
may be periodically re-synced and do not follow other edk2 coding
stadards.
Compared to macro-based include guards, `#pragma once`:
- Eliminates the risk of macro name collisions or copy/paste errors
where two headers inadvertently use the same guard macro.
- Eliminate inconsistency in the way include guard macros are named
(e.g., some files use `__FILE_H__`, others use `FILE_H_`, etc.).
- Reduces boilerplate (three lines replaced by one).
- Avoids polluting the macro namespace with guard symbols.
- Can improve build times as the preprocessor can skip re-opening the
file entirely, rather than re-reading it to find the matching
`#endif` ("multiple-include optimization").
- Note that some compilers may already optimize traditional include
guards, by recognzining the idiomatic pattern.
This change is made acknowledging that overall portability of the
code will technically be reduced, as `#pragma once` is not part of the
C/C++ standards.
However, this is considered acceptable given:
1. edk2 already defines a subset of supported compilers in
BaseTools/Conf/tools_def.template, all of which have supported
`#pragma once` for over two decades.
2. There have been concerns raised to the project about inconsistent
include guard naming and potential macro collisions.
Approximate compiler support dates:
- MSVC: Supported since Visual C++ 4.2 (1996)
- GCC: Supported since 3.4 (2004)
(http://gnu.ist.utl.pt/software/gcc/gcc-3.4/changes.html)
- Clang (LLVM based): Since initial release in 2007
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
This commit removes OVMF IA32 from edk2 per RFC
https://edk2.groups.io/g/devel/topic/rfc_remove_ovmf_ia32_and/114152215.
OVMF IA32 is a 32 bit only platform that no longer represents the vast
majority of physical platforms. The RFC details more reasoning in
much more depth.
OVMF IA32 will be kept in a branch off the edk2-stable202508 tag for
any long term consumers; it will receive build break updates only
(e.g. if an upstream submodule changes location).
Signed-off-by: Oliver Smith-Denny <osde@microsoft.com>
|
|
Introduce gUiAppFileGuid: it has the same value of UiApp guid defined in
the .inf file. This is used to register UiApp as a boot entry in the
BootManagerMenu.
This registration is done in PlatformBootManagerBeforeConsole because
it must be done before the hotkeys are registered. This is because
in a system with hotkeys still bound to UiApp, but with firmware disabled,
you can still boot into the latter by hitting ESC or F2 during boot.
UiApp can be enabled/disabled using fw_cfg option FirmwareSetupSupport
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
Setting the LOAD_OPTION_CATEGORY_APP flag for EFI Shell prevents the boot
loader from using it as a fallback if all other entries fail to boot.
With a boot manager menu available, it can be annoying to enter the EFI Shell
directly, because from the menu, the user can try to boot again (e.g.
temporary network problem) or enter the shell/firmware config only if
necessary.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
Delete functions that are available in the PlatformBootManagerCommonLib
and add this Lib to dependencies in .inf file.
This is to reduce code duplication, because many functions have the same
implementation in PlatformBootManagerLib and PlatformBootManagerLibLight.
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
This commit adds:
- missing virtio subsystem ID for input device
- PrepareVirtioKeyboardDevicePath() handler to boot manager library
Signed-off-by: Paweł Poławski <ppolawsk@redhat.com>
|
|
Add a FileIsInFv check to PlatformRegisterFvBootOption, this is to
to avoid adding and then removing a boot option shortly after,
because the file is no longer in the firmware volume.
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
Move out file presence check from RemoveStaleFvFileOptions
to a new helper function for reusability. No functional changes
intended.
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
usage: qemu -fw_cfg name=opt/org.tianocore/EFIShellSupport,string=no
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
Add a new parameter to selectively enable or disable the BootOption.
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
|
|
Since the pixiefail CVE fix the network stack requires a hardware
random number generator. This can currently be a modern CPU supporting
the RDRAND instruction or a virtio-rng device.
The latter is initialized during the BDS phase.
To ensure all depending (network) modules are also started, we need to
run the dispatcher once more after the device was initialized.
Without this, network boot is not available under certain hardware
configurations.
Fixes: 4c4ceb2ceb ("NetworkPkg: SECURITY PATCH CVE-2023-45237")
Analysed-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
|
|
"OvmfPkg/Include/IndustryStandard/Virtio095.h" defines the macro
VIRTIO_SUBSYSTEM_CONSOLE with value 3; other locations in the tree already
use it (such as ArmVirtPkg/PlatformBootManagerLib,
OvmfPkg/VirtioSerialDxe). We should use it in
OvmfPkg/PlatformBootManagerLib too, rather than the naked constant 3.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add DetectAndPreparePlatformVirtioDevicePath() helper function
to setup virtio-mmio devices. Start with virtio-serial support.
This makes virtio console usable with microvm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add new PCD PcdBootRestrictToFirmware. When set to TRUE restrict
boot options to EFI applications embedded into the firmware image.
Behavior should be identical to the PlatformBootManagerLibGrub
library variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In case a virtio-serial device is present in the system register the
first serial port as console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
OvmfPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
|
|
Time to leave behind relics from the last century and arrive in the
modern world. Drop PC-ANSI Terminal Type for the serial console, use
UTF-8 instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The function reads the boot order from qemu fw_cfg, translates it into
device paths and stores them in 'QemuBootOrderNNNN' variables. In case
there is no boot ordering configured the function will do nothing.
Use case: Allow applications loaded via 'qemu -kernel bootloader.efi'
obey the boot order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Cloud Hypervisor doesn't emulate any LPC bridge, therefore we simply
need to rely on the serial I/O port to be connected as a console.
It reuses the code from Xen since it's very generic.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
|
|
For GPU passthrough support we have to initialize the console after
EfiBootManagerDispatchDeferredImages() has loaded ROMs, so call it after
this. This was the calling order before the TCG physical presence support
had to be moved and the console initialized earlier so user interaction
could be supported before processing TCG physical presence opcodes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Shivanshu Goyal <shivanshu3@gmail.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Handle things differently when the detected host bridge matches the
Cloud Hypervisor PCI host bridge identifier.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
Use DEBUG_LINE_NUMBER instead of __LINE__.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
Microvm has no LPC bridge, so drop the PciSioSerialDxe driver.
Use SerialDxe instead, with ioport hardcoded to 0x3f8 aka com1 aka ttyS0.
With this tianocore boots to uefi shell prompt on the serial console.
Direct kernel boot can be used too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
|
|
Nothing to do here ;)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
|
|
Handle the TPM 2 physical presence interface (PPI) opcodes in
PlatformBootManagerBeforeConsole() before the TPM 2 platform hierarchy
is disabled. Since the handling of the PPI opcodes may require inter-
action with the user, initialize the keyboard before handling PPI codes.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
|
|
To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies PlatformBootManagerLib to
detect S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
|
|
This patch fixes an issue with the current programming of the i440fx
PCI Interrupt routing assignment.
Explanation by Laszlo Ersek:
(1) The rotating pattern is a map:
(slot, function) --> (interrupt link) [LNKA..LNKD]
(more precisely, it is a pattern from (slot, pin) to (interrupt link),
but function<->pin is an identity mapping in the QEMU hardware, so we
can just use (slot, function) rather than (slot, pin) on the left hand
side. But I digress.)
The ACPI _PRT object is generated by QEMU; it describes this map.
(2) Another map is
(interrupt link) --> { set of possible interrupt numbers,
for this link }
This map is given by the LNK[A..D] ACPI objects, also given by QEMU.
(3) What the firmware is expected to do is:
(3a) for each interrupt link, select an *actual* interrupt from the set
that's possible for that link, yielding a deterministic map
(interrupt link) --> (actual interrupt number)
and
(3b) for each PCI device/function with an interrupt pin, resolve the
(slot, function) --> (interrupt link) --> (actual interrupt number)
functional composition, and program the result into the Interrupt Line
register of the device.
In OVMF, we do not parse the rotating map described under (1) from
QEMU's _PRT object. Instead, we duplicate the code. This is not a
problem.
In OVMF, we also do not parse the map described under (2) from QEMU's
ACPI content. Instead, we pick a specific selection (3a) that we
"apriori" know satisfies (2). This is also not a problem. OVMF's
particular selection is the PciHostIrqs table.
(
Table (2) from QEMU is
LNKA -> { 5, 10, 11 }
LNKB -> { 5, 10, 11 }
LNKC -> { 5, 10, 11 }
LNKD -> { 5, 10, 11 }
and our specific pick in OVMF, in the PciHostIrqs table, is
LNKA -> 10
LNKB -> 10
LNKC -> 11
LNKD -> 11
)
In OVMF, we also cover step (3b), in the SetPciIntLine() function.
What's missing in OVMF -- and what this patch corrects -- is that we
currently fail to program our selection for table (3) into the hardware.
We pick a specific LNKx->IRQ# mapping for each interrupt link, and we
correctly program the PCI Interrupt Line registers through those
link-to-IRQ mappings -- but we don't tell the hardware about the
link-to-IRQ mappings. More precisely, we program such a link-to-IRQ
mapping table into the hardware that is then not matched by the mapping
we use for programming the PCI device/function interrupt lines. As a
result, some PCI Interrupt Line registers will have impossible values --
a given (slot, function) may use a particular link, but also report an
interrupt number that was never picked for that link.
Output of Linux PCI Interrupt Links for i440fx before the patch:
[ 0.327305] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
[ 0.327944] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.328582] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[ 0.329208] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
[ 0.329807] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
after the patch:
[ 0.327292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.327934] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.328564] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.329195] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.329785] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Output of Linux PCI Interrupt Links for q35 before the patch:
[ 0.307474] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.308027] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.308764] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.309310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.309853] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.310508] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.311051] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.311589] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
after the patch:
[ 0.301991] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.302833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.303354] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.303873] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.304399] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.304918] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.305436] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.305954] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <8dbedc4c7a1c3fd390aca915270814e3b35e13a5.camel@amazon.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Generated mechanically with:
find OvmfPkg -type f -exec sed -i -e 's/EFI_D_/DEBUG_/g' {} \;
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200429215327.606467-1-rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Replace the open coded sequence to load Linux on x86 with a short and
generic sequence invoking QemuLoadImageLib, which can be provided by
a generic version that only supports the LoadImage and StartImage boot
services, and one that incorporates the entire legacy loading sequence
as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
|
|
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be06ded3a59726a4052a9039be7d459b, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
|
|
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
|
|
When running in a Xen PVH guest, there's nothing to do in
PciAcpiInitialization() because there isn't any PCI bus. When the Host
Bridge DID isn't recognised, simply continue. (The value of
PcdOvmfHostBridgePciDevId would be 0 because it isn't set.)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-29-anthony.perard@citrix.com>
|
|
Replace the XenDetected() implementation by the one from
XenPlatformLib.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-28-anthony.perard@citrix.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for OvmfPkg.
So instead, use the symbolic GUID in ShellPkg for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Mps.h is included in BdsPlatform.h but not actually used.
So remove it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
|
|
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Virtio RNG devices are never boot devices, so in commit 245c643cc8b7 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8b7 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8b73240c3b88cb55b2911b285a8c10d
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8b7.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8b73240c3b88cb55b2911b285a8c10d
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8b7.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
