| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Following the APs now always initializing separate exception
stacks, this commit always initializes a separate exception
stack for the BSP as well. Previously, this was only enabled
when PcdCpuStackGuard was set.
However, even when a stack guard page is not present,
stack overflows can still occur and corrupt the stack; if an
exception is taken here, it is still valuable to have a separate
exception stack for sanity.
Signed-off-by: Oliver Smith-Denny <osde@microsoft.com>
|
|
Add a late initialize in DxeMain for the debug agent. This is required
for the debug agent to be able to setup events to handle image loads,
exit boot services, and other important callbacks.
Define a reinitialize debug agent.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
|
|
According to UEFI spec 2.10 errata A section 7.4.6
"All events from the EFI_EVENT_GROUP_BEFORE_EXIT_BOOT_SERVICES and
EFI_EVENT_GROUP_EXIT_BOOT_SERVICES event notification groups as well
as events of type EVT_SIGNAL_EXIT_BOOT_SERVICES must be signaled
before ExitBootServices() returns EFI_SUCCESS. The events are only
signaled once even if ExitBootServices() is called multiple times."
So keep track of whether ExitBootServices() has been called, and signal
the event group EFI_EVENT_GROUP_BEFORE_EXIT_BOOT_SERVICES only the first
time around.
EFI_EVENT_GROUP_EXIT_BOOT_SERVICES will only be signalled if
ExitBootServices() is going to run to [successful] completion, after
which calling it a second time is not possible anyway. So for this case,
no special handling is needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4817
Before entering BIOS setup, CoreValidateHandle function executed
over 600,000 times during BDS phase on latest 8S server platform.
In CoreValidateHandle function, current implementation will go
through the doubly-linked list handle database in each call, and
this will have big impact on boot performance.
The optimization is using Red-black tree to store the EFI handle
address when insert each EFI handle into the handle database, and
remove the handle from Red-black tree if the handle is removed
from the handle database. CoreValidateHandle function changed to
go through the Red-black tree.
After verification on latest 8S server platform, BDS boot time can
save 20s+ after this change.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Andrew Fish <afish@apple.com>
Tested-by: Xiaoqiang Zhang <xiaoqiang.zhang@intel.com>
|
|
Update the DxeMain initialization order to initialize GCD
services before any runtime allocations are performed. This
is required to prevent runtime data fragmentation when the
UEFI System Table and UEFI Runtime Service Table are allocated
before both the memory and GCD services are initialized.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Location of notification is has been specified in UEFI v2.9.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "Min M. Xu" <min.m.xu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: "Michael D. Kinney" <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Message-Id: <20221108164616.3251967-4-dionnaglaze@google.com>
|
|
Hide the Exception implementation details in CpuExcetionHandlerLib and
caller only need to provide buffer
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
|
Commit e7abb94d1 removed InitializeCpuExceptionHandlersEx
and updated DxeMain to call InitializeCpuExceptionHandlers
for exception setup. But the old behavior that calls *Ex() sets
up the stack guard as well. To match the old behavior,
the patch calls InitializeSeparateExceptionStacks.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Today InitializeCpuExceptionHandlersEx is called from three modules:
1. DxeCore (links to DxeCpuExceptionHandlerLib)
DxeCore expects it initializes the IDT entries as well as
assigning separate stacks for #DF and #PF.
2. CpuMpPei (links to PeiCpuExceptionHandlerLib)
and CpuDxe (links to DxeCpuExceptionHandlerLib)
It's called for each thread for only assigning separate stacks for
#DF and #PF. The IDT entries initialization is skipped because
caller sets InitData->X64.InitDefaultHandlers to FALSE.
Additionally, SecPeiCpuExceptionHandlerLib, SmmCpuExceptionHandlerLib
also implement such API and the behavior of the API is simply to initialize
IDT entries only.
Because it mixes the IDT entries initialization and separate stacks
assignment for certain exception handlers together, in order to know
whether the function call only initializes IDT entries, or assigns stacks,
we need to check:
1. value of InitData->X64.InitDefaultHandlers
2. library instance
This patch cleans up the code to separate the stack assignment to a new API:
InitializeSeparateExceptionStacks().
Only when caller calls the new API, the separate stacks are assigned.
With this change, the SecPei and Smm instance can return unsupported which
gives caller a very clear status.
The old API InitializeCpuExceptionHandlersEx() is removed in this patch.
Because no platform module is consuming the old API, the impact is none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the MdeModulePkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
CoreInitializeMemoryServices() logs "BaseAddress" and "Length" with
DEBUG() before DxeMain() calls ProcessLibraryConstructorList()
explicitly. (Library construction is not an automatic part of the DXE
Core entry point.)
So those DEBUG()s in CoreInitializeMemoryServices() are issued against
an un-constructed DebugLib, and also against a -- possibly underlying --
un-constructed SerialPortLib.
Some DebugLib instances can deal with this (see for example commit
91a5b1365075, "OvmfPkg/PlatformDebugLibIoPort: fix port detection for
use in the DXE Core", 2018-08-06), while some others can't (see for
example the DebugLib instance
"MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf"
coupled with the SerialPortLib instance
"ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.inf").
Addressing this issue in a SerialPortLib instance that underlies
BaseDebugLibSerialPort seems wrong; either the DebugLib instance should
cope directly with being called un-constructed (see again commit
91a5b1365075), or the DXE Core should log relevant information *at
least* after library instances have been constructed. This patch
implements the latter (only for the "BaseAddress" and "Length" values
calculated by CoreInitializeMemoryServices()).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jeff Brasen <jbrasen@nvidia.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201103161557.30621-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
The memory attributes table handling code shared some parts of the
properties table handling code when it was introduced. The latter has
been dropped, and so we can merge the remaining pieces into the former.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2633
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
The functions that are never called have been removed.
They are ClearGuardMapBit,SetGuardMapBit,IsHeadGuard,
IsTailGuard and CoreEfiNotAvailableYetArg0.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Replace old Perf macros with the new added ones.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Within function CoreExitBootServices(), this commit will move the call
of:
MemoryProtectionExitBootServicesCallback();
before:
SaveAndSetDebugTimerInterrupt (FALSE);
and
gCpu->DisableInterrupt (gCpu);
The reason is that, within MemoryProtectionExitBootServicesCallback(),
APIs like RaiseTpl and RestoreTpl maybe called. An example will be:
DebugLib (using PeiDxeDebugLibReportStatusCode instance)
|
v
ReportStatusCodeLib (using DxeReportStatusCodeLib instance)
|
v
Raise/RestoreTpl
The call of Raise/RestoreTpl APIs will re-enable BSP interrupts. Hence,
this commit refine the calling sequence to ensure BSP interrupts before
leaving CoreExitBootServices().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Original API InitializeCpuExceptionHandlers is used in DxeMain to initialize
exception handlers but it does not support setting up stack switch required
by Stack Guard feature. Using the new API instead to make sure Stack Guard
feature is applicable to most part of code.
Since this API is called before memory service initialization, there's no
way to call AllocateXxx API to reserve memory. Global variables are used
for this special case. GDT table is reserved at least 2KB which should be
big enough for all current use cases.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
|
|
FV3 HOB was introduced by new (>= 1.5) PI spec, it is intended to
be used to propagate PEI-phase FV authentication status to DXE.
This patch is to update PeiCore to build FV3 HOB with the
authentication status and DxeCore to get the authentication
status from FV3 HOB when producing FVB Protocol.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
If the UEFI image is page aligned, the image code section is set to read
only and the image data section is set to non-executable.
1) This policy is applied for all UEFI image including boot service driver,
runtime driver or application.
2) This policy is applied only if the UEFI image meets the page alignment
requirement.
3) This policy is applied only if the Source UEFI image matches the
PcdImageProtectionPolicy definition.
4) This policy is not applied to the non-PE image region.
The DxeCore calls CpuArchProtocol->SetMemoryAttributes() to protect
the image. If the CpuArch protocol is not installed yet, the DxeCore
enqueues the protection request. Once the CpuArch is installed, the
DxeCore dequeues the protection request and applies policy.
Once the image is unloaded, the protection is removed automatically.
The UEFI runtime image protection is teared down at ExitBootServices(),
the runtime image code relocation need write code segment at
SetVirtualAddressMap(). We cannot assume OS/Loader has taken over
page table at that time.
NOTE: It is per-requisite that code section and data section
should not be not merged. That is same criteria for SMM/runtime driver.
We are not able to detect during BIOS boot, because
we can only get LINK warning below:
"LINK : warning LNK4254: section '.data' (C0000040) merged into
'.text' (60000020) with different attributes"
But final attribute in PE code section is same.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
- paramters -> parameters
- funciton -> function
- dependecy -> dependency
- evauated -> evaluated
- genric -> generic
- retore -> restore
- Protocl -> Protocol
- availible -> available
- elasped -> elapsed
- sarted -> started
- boundry -> boundary
- permenent -> permanent
- debuging -> debugging
- availble -> available
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
PeiCore EntryPoint library _ModuleEntryPoint() will call PeiCore(), then call
CpuDeadLoop (). When NORETURN is added for PeiCore(), MSVC compiler will report
warning C4702: unreachable code for CpuDeadLoop (). And, the warning is treated
as error and cause build break. DxeMain() has the similar issue.
edk2 uses EntryPoint library to wrap every module entry point function except
for SEC. The module entry point is still called by _ModuleEntryPoint(). So,
there will be negative impact to add NORETURN for the module entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
|
|
This patch adds the NORETURN attribute to functions that transfer to
other phases, along with an UNREACHABLE() call at the end to avoid
false warnings.
DxeIpl has been excluded as its main function returns a status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Set the ImageContext.Handle and ImageContext.ImageRead() fields so that
PeCoffLoaderRelocateImageExtraAction() can invoke PeCoffLoaderGetImageInfo
or PeCoffLoaderGetPeHeader if desired to obtain additional metadata.
We will use this to create a PeCoffLoaderRelocateImageExtraAction()
implementation that applies boot time strict mapping permissions to
PE/COFF modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Current MemoryAttributesTable will be installed on ReadyToBoot event
at TPL_NOTIFY level, it maybe incorrect when PcdHiiOsRuntimeSupport
= TRUE as HiiDatabaseDxe will have runtime memory allocation for HII
OS runtime support on and after ReadyToBoot. The issue was exposed at
http://article.gmane.org/gmane.comp.bios.edk2.devel/10125.
To make sure the correctness of MemoryAttributesTable, this patch is
to enhance MemoryAttributesTable installation to install
MemoryAttributesTable on ReadyToBoot event at TPL_CALLBACK - 1 level
to make sure it is at the last of ReadyToBoot event, and also hook
runtime memory allocation after ReadyToBoot.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
Originally, the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" was after ProcessLibraryConstructorList(). To fix an issue,
ProcessLibraryConstructorList() was moved to be right after CoreInitializeGcdServices()
at c5d5379937629f3061d08b8d9a3386a40152ca2c, but the code block was left.
As there maybe PeCoffExtraActionLib implementation need Constructor executed first,
the patch is to move the code block for "Report DXE Core image information to the PE/COFF
Extra Action Library" to be after ProcessLibraryConstructorList.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
|
|
When the DXE core is loaded, it invokes the PeCoffExtraActionLib library
function 'PeCoffLoaderRelocateImageExtraAction' explicitly, which may be
in addition to the same function having been called by the DxeIpl PE/COFF
loader instance.
The ImageContext that DXE core presents to this function is only partially
initialized, which may result in the following output on AArch64 systems:
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226240
<some intermediate output>
add-symbol-file ..MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x5F226000
This is caused by incorrect data in the ImageContext structure, which means
the start of the .text section is calculated incorrectly. In general, it is
the duty of the caller to present a valid ImageContext structure, so let's
add the missing values before invoking PeCoffLoaderRelocateImageExtraAction().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Call CoreInitializeMemoryAttributesTable() in DXE Entrypoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Gao, Liming" <liming.gao@intel.com>
|
|
to right after CoreInitializeGcdServices().
Why?
Some platforms maybe report both below 4G and above 4G memory resource hob as tested,
then CoreInitializeMemoryServices() will find and add the tested above 4G memory resource hob to memory descriptor for early memory allocation services,
then if ProcessLibraryConstructorList() that has library constructor tries to allocate below 4G memory and will fail.
In fact, the following CoreInitializeGcdServices() will add all the memory resource hob to GCD map,
and add the tested below 4G memory resource hob to memory descriptor,
but it has been too late for ProcessLibraryConstructorList().
Also move below two lines as they are needed to be after
the constructor of DxeCorePerfomanceLib.
PERF_END (NULL,"PEI", NULL, 0) ;
PERF_START (NULL,"DXE", NULL, 0) ;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18146 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Add PropertiesTableAttributesDxe driver to set ACPINvs/Reserved memory type to be XP, as default policy.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
Reviewed-by: "Zeng, Star" <Star.Zeng@intel.com>
Reviewed-by: "Gao, Liming" <Liming.Gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17564 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Modify DxeMain.c which displays incorrect debug message regarding FV Hob.
Specifically, the BaseAddress and Length are not related to the same FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16660 6f19259b-4bc3-4df7-8a09-765794883524
|
|
It is defined in the PI Specification version 1.3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16409 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16335 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15695 6f19259b-4bc3-4df7-8a09-765794883524
|
|
down to PeCoffLoaderRelocateImageExtraAction()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15587 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Zeng, Star <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15522 6f19259b-4bc3-4df7-8a09-765794883524
|
|
boot service usage after () after gCpu->DisableInterrupt ().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-By: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zeng, Star <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15243 6f19259b-4bc3-4df7-8a09-765794883524
|
|
it has.
2. DxeMain will get Vector Handoff Table GUIDed HOB to install configuration table if it has.
3. Updated CPU Exception Handler Library to provide 3 new APIs to replace original one API and updated NULL instance accordingly.
4. Updated DxeMain/CapsuleX64/BootSriptExectorDxe to use the new API in CPU Exception Handler Lib.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14884 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: Li Elvin <elvin.li@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
Reviewed-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Fan Jeff <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13890 6f19259b-4bc3-4df7-8a09-765794883524
|
|
1. Update SecurityManagementLib to support SAP2 and SAP services.
2. Update SecurityStub driver to produce SAP2 and SAP protocol both.
3. Update DxeCore and SmmCore to use SAP2 and SAP service to verify Image.
4. Update DxeCore ConnectController() to use SAP2 service to check user permission.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <dong.guo@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13660 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Signed-off-by: Chao Zhang<chao.b.zhang@intel.com>
Reviewed-by: Dong Guo<guo.dong@intel.com>
Reviewed-by: Gao Liming<liming.gao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13581 6f19259b-4bc3-4df7-8a09-765794883524
|
|
handlers and add one NULL library instance.
2. Updated DXE Core, BootScriptExecutorDxe and CapsuleX64Pei to consume CPU Exception Library to setup the default CPU Exception handlers.
Signed-off-by: vanjeff
Reviewed-by: jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13097 6f19259b-4bc3-4df7-8a09-765794883524
|
|
memory map unchanged.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10999 6f19259b-4bc3-4df7-8a09-765794883524
|
|
constructors have been executed.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10778 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. Add definition DEBUG_AGENT_CONTINUE.
3. Update the definition of InitializeDebugAgent() more comments.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10660 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10420 6f19259b-4bc3-4df7-8a09-765794883524
|
|
DEBUG_AGENT_INIT_DXE to DEBUG_AGENT_INIT_DXE_CORE and add DEBUG_AGENT_INIT_S3.
2. disable debug timer interrupt in ExitBootServices().
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10239 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. DxeCore and DxeIpl consume debug agent library.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10119 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10058 6f19259b-4bc3-4df7-8a09-765794883524
|
