1 files changed, 111 insertions, 111 deletions
diff --git a/MdeModulePkg/Include/Guid/VariableFlashInfo.h b/MdeModulePkg/Include/Guid/VariableFlashInfo.h
index 992a0dcdd3..5d836f3ea9 100644
--- a/MdeModulePkg/Include/Guid/VariableFlashInfo.h
+++ b/MdeModulePkg/Include/Guid/VariableFlashInfo.h
@@ -1,111 +1,111 @@
-/** @file
-  This file defines the GUID and data structure used to pass information about
-  a variable store mapped on flash (i.e. a MMIO firmware volume) to the modules
-  that consume that information such as the DXE and MM UEFI variable drivers.
-
-  The HOB described in this file is currently optional. It is primarily provided
-  to allow a platform to dynamically describe the flash information to environments
-  such as Standalone MM that cannot access the prior method using dynamic PCDs.
-
-  Even for platforms that use Standalone MM, if the information is only stored
-  statically such as with FixedAtBuild PCDs, the HOB is not required.
-
-  Every point of consumption in this package that uses the PCDs will first check
-  for the HOB and use its value if present.
-
-  Early modules such as the PEI UEFI variable driver might also consume this
-  information. For modules such as these, that execute early in the boot flow,
-  at least two approaches are possible depending on platform design.
-
-  1. If the information in the HOB exactly matches the information in the PCDs,
-     (i.e. the HOB values are set using the PCD values), let the driver read
-     the information from the PCD and produce the HOB later in boot.
-
-  2. Produce the HOB very early in boot. For example, the earliest point the HOB
-     is currently consumed is in FaultTolerantWritePei. Note that FaultTolerantWritePei
-     produces gEdkiiFaultTolerantWriteGuid which is a dependency for VariablePei.
-
-     Therefore, attaching a NULL class library to FaultTolerantWritePei with a
-     constructor that produces the HOB will guarantee it is produced before the first
-     point of consumption as the constructor is executed before the module entry point.
-
-  Copyright (c) Microsoft Corporation.<BR>
-
-  SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef VARIABLE_FLASH_INFO_H_
-#define VARIABLE_FLASH_INFO_H_
-
-#define VARIABLE_FLASH_INFO_HOB_GUID \
-  { 0x5d11c653, 0x8154, 0x4ac3, { 0xa8, 0xc2, 0xfb, 0xa2, 0x89, 0x20, 0xfc, 0x90 }}
-
-#define VARIABLE_FLASH_INFO_HOB_VERSION  1
-
-extern EFI_GUID  gVariableFlashInfoHobGuid;
-
-#pragma pack (push, 1)
-
-///
-/// This structure can be used to describe UEFI variable
-/// flash information.
-///
-typedef struct {
-  ///
-  /// Version of this structure.
-  ///
-  /// Increment the value when the structure is modified.
-  ///
-  UINT32                  Version;
-  ///
-  /// Reserved field.
-  ///
-  /// Currently reserved for natural alignment.
-  ///
-  UINT32                  Reserved;
-  ///
-  /// Base address of the non-volatile variable range in the flash device.
-  ///
-  /// Note that this address should align with the block size requirements of the flash device.
-  ///
-  EFI_PHYSICAL_ADDRESS    NvVariableBaseAddress;
-  ///
-  /// Size of the non-volatile variable range in the flash device.
-  ///
-  /// Note that this value should be less than or equal to FtwSpareLength to support reclaim of
-  /// entire variable store area.
-  /// Note that this address should align with the block size requirements of the flash device.
-  ///
-  UINT64                  NvVariableLength;
-  ///
-  /// Base address of the FTW spare block range in the flash device.
-  ///
-  /// Note that this address should align with the block size requirements of the flash device.
-  ///
-  EFI_PHYSICAL_ADDRESS    FtwSpareBaseAddress;
-  ///
-  /// Size of the FTW spare block range in the flash device.
-  ///
-  /// Note that this value should be greater than or equal to NvVariableLength.
-  /// Note that this address should align with the block size requirements of the flash device.
-  ///
-  UINT64                  FtwSpareLength;
-  ///
-  /// Base address of the FTW working block range in the flash device.
-  ///
-  /// Note that if FtwWorkingLength is larger than on block size, this value should be block size aligned.
-  ///
-  EFI_PHYSICAL_ADDRESS    FtwWorkingBaseAddress;
-  ///
-  /// Size of the FTW working block range in the flash device.
-  ///
-  /// Note that if the value is less than on block size, the range should not span blocks.
-  /// Note that if the value is larger than one block size, this value should be block size aligned.
-  ///
-  UINT64                  FtwWorkingLength;
-} VARIABLE_FLASH_INFO;
-
-#pragma pack (pop)
-
-#endif
+/** @file
+  This file defines the GUID and data structure used to pass information about
+  a variable store mapped on flash (i.e. a MMIO firmware volume) to the modules
+  that consume that information such as the DXE and MM UEFI variable drivers.
+
+  The HOB described in this file is currently optional. It is primarily provided
+  to allow a platform to dynamically describe the flash information to environments
+  such as Standalone MM that cannot access the prior method using dynamic PCDs.
+
+  Even for platforms that use Standalone MM, if the information is only stored
+  statically such as with FixedAtBuild PCDs, the HOB is not required.
+
+  Every point of consumption in this package that uses the PCDs will first check
+  for the HOB and use its value if present.
+
+  Early modules such as the PEI UEFI variable driver might also consume this
+  information. For modules such as these, that execute early in the boot flow,
+  at least two approaches are possible depending on platform design.
+
+  1. If the information in the HOB exactly matches the information in the PCDs,
+     (i.e. the HOB values are set using the PCD values), let the driver read
+     the information from the PCD and produce the HOB later in boot.
+
+  2. Produce the HOB very early in boot. For example, the earliest point the HOB
+     is currently consumed is in FaultTolerantWritePei. Note that FaultTolerantWritePei
+     produces gEdkiiFaultTolerantWriteGuid which is a dependency for VariablePei.
+
+     Therefore, attaching a NULL class library to FaultTolerantWritePei with a
+     constructor that produces the HOB will guarantee it is produced before the first
+     point of consumption as the constructor is executed before the module entry point.
+
+  Copyright (c) Microsoft Corporation.<BR>
+
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef VARIABLE_FLASH_INFO_H_
+#define VARIABLE_FLASH_INFO_H_
+
+#define VARIABLE_FLASH_INFO_HOB_GUID \
+  { 0x5d11c653, 0x8154, 0x4ac3, { 0xa8, 0xc2, 0xfb, 0xa2, 0x89, 0x20, 0xfc, 0x90 }}
+
+#define VARIABLE_FLASH_INFO_HOB_VERSION  1
+
+extern EFI_GUID  gVariableFlashInfoHobGuid;
+
+#pragma pack (push, 1)
+
+///
+/// This structure can be used to describe UEFI variable
+/// flash information.
+///
+typedef struct {
+  ///
+  /// Version of this structure.
+  ///
+  /// Increment the value when the structure is modified.
+  ///
+  UINT32                  Version;
+  ///
+  /// Reserved field.
+  ///
+  /// Currently reserved for natural alignment.
+  ///
+  UINT32                  Reserved;
+  ///
+  /// Base address of the non-volatile variable range in the flash device.
+  ///
+  /// Note that this address should align with the block size requirements of the flash device.
+  ///
+  EFI_PHYSICAL_ADDRESS    NvVariableBaseAddress;
+  ///
+  /// Size of the non-volatile variable range in the flash device.
+  ///
+  /// Note that this value should be less than or equal to FtwSpareLength to support reclaim of
+  /// entire variable store area.
+  /// Note that this address should align with the block size requirements of the flash device.
+  ///
+  UINT64                  NvVariableLength;
+  ///
+  /// Base address of the FTW spare block range in the flash device.
+  ///
+  /// Note that this address should align with the block size requirements of the flash device.
+  ///
+  EFI_PHYSICAL_ADDRESS    FtwSpareBaseAddress;
+  ///
+  /// Size of the FTW spare block range in the flash device.
+  ///
+  /// Note that this value should be greater than or equal to NvVariableLength.
+  /// Note that this address should align with the block size requirements of the flash device.
+  ///
+  UINT64                  FtwSpareLength;
+  ///
+  /// Base address of the FTW working block range in the flash device.
+  ///
+  /// Note that if FtwWorkingLength is larger than on block size, this value should be block size aligned.
+  ///
+  EFI_PHYSICAL_ADDRESS    FtwWorkingBaseAddress;
+  ///
+  /// Size of the FTW working block range in the flash device.
+  ///
+  /// Note that if the value is less than on block size, the range should not span blocks.
+  /// Note that if the value is larger than one block size, this value should be block size aligned.
+  ///
+  UINT64                  FtwWorkingLength;
+} VARIABLE_FLASH_INFO;
+
+#pragma pack (pop)
+
+#endif