summaryrefslogtreecommitdiff
path: root/BaseTools/Source/C/Include/Protocol
diff options
context:
space:
mode:
Diffstat (limited to 'BaseTools/Source/C/Include/Protocol')
-rw-r--r--BaseTools/Source/C/Include/Protocol/DevicePath.h2808
-rw-r--r--BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h576
-rw-r--r--BaseTools/Source/C/Include/Protocol/GraphicsOutput.h374
-rw-r--r--BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h290
-rw-r--r--BaseTools/Source/C/Include/Protocol/HiiFramework.h1888
-rw-r--r--BaseTools/Source/C/Include/Protocol/UgaDraw.h322
6 files changed, 3129 insertions, 3129 deletions
diff --git a/BaseTools/Source/C/Include/Protocol/DevicePath.h b/BaseTools/Source/C/Include/Protocol/DevicePath.h
index bcad2cfead..80ebaf98eb 100644
--- a/BaseTools/Source/C/Include/Protocol/DevicePath.h
+++ b/BaseTools/Source/C/Include/Protocol/DevicePath.h
@@ -1,1404 +1,1404 @@
-/** @file
- The device path protocol as defined in UEFI 2.0.
-
- The device path represents a programmatic path to a device,
- from a software point of view. The path must persist from boot to boot, so
- it can not contain things like PCI bus numbers that change from boot to boot.
-
-Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __EFI_DEVICE_PATH_H__
-#define __EFI_DEVICE_PATH_H__
-
-#include <Guid/PcAnsi.h>
-#include <IndustryStandard/Acpi30.h>
-#include <IndustryStandard/Bluetooth.h>
-
-///
-/// Device Path protocol.
-///
-#define EFI_DEVICE_PATH_PROTOCOL_GUID \
- { \
- 0x9576e91, 0x6d3f, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
- }
-
-///
-/// Device Path guid definition for backward-compatible with EFI1.1.
-///
-#define DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH_PROTOCOL_GUID
-
-#pragma pack(1)
-
-#if defined(_MSC_EXTENSIONS)
-//
-// Disable warning when last field of data structure is a zero sized array.
-//
-#pragma warning ( disable : 4200 )
-#endif
-
-/**
- This protocol can be used on any device handle to obtain generic path/location
- information concerning the physical device or logical device. If the handle does
- not logically map to a physical device, the handle may not necessarily support
- the device path protocol. The device path describes the location of the device
- the handle is for. The size of the Device Path can be determined from the structures
- that make up the Device Path.
-**/
-typedef struct {
- UINT8 Type; ///< 0x01 Hardware Device Path.
- ///< 0x02 ACPI Device Path.
- ///< 0x03 Messaging Device Path.
- ///< 0x04 Media Device Path.
- ///< 0x05 BIOS Boot Specification Device Path.
- ///< 0x7F End of Hardware Device Path.
-
- UINT8 SubType; ///< Varies by Type
- ///< 0xFF End Entire Device Path, or
- ///< 0x01 End This Instance of a Device Path and start a new
- ///< Device Path.
-
- UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define
- ///< type of data. Size of data is included in Length.
-
-} EFI_DEVICE_PATH_PROTOCOL;
-
-///
-/// Device Path protocol definition for backward-compatible with EFI1.1.
-///
-typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH;
-
-///
-/// Hardware Device Paths.
-///
-#define HARDWARE_DEVICE_PATH 0x01
-
-///
-/// PCI Device Path SubType.
-///
-#define HW_PCI_DP 0x01
-
-///
-/// PCI Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// PCI Function Number.
- ///
- UINT8 Function;
- ///
- /// PCI Device Number.
- ///
- UINT8 Device;
-} PCI_DEVICE_PATH;
-
-///
-/// PCCARD Device Path SubType.
-///
-#define HW_PCCARD_DP 0x02
-
-///
-/// PCCARD Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Function Number (0 = First Function).
- ///
- UINT8 FunctionNumber;
-} PCCARD_DEVICE_PATH;
-
-///
-/// Memory Mapped Device Path SubType.
-///
-#define HW_MEMMAP_DP 0x03
-
-///
-/// Memory Mapped Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// EFI_MEMORY_TYPE
- ///
- UINT32 MemoryType;
- ///
- /// Starting Memory Address.
- ///
- EFI_PHYSICAL_ADDRESS StartingAddress;
- ///
- /// Ending Memory Address.
- ///
- EFI_PHYSICAL_ADDRESS EndingAddress;
-} MEMMAP_DEVICE_PATH;
-
-///
-/// Hardware Vendor Device Path SubType.
-///
-#define HW_VENDOR_DP 0x04
-
-///
-/// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must
-/// allocate a Vendor GUID for a Device Path. The Vendor GUID can then be used to define the
-/// contents on the n bytes that follow in the Vendor Device Path node.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Vendor-assigned GUID that defines the data that follows.
- ///
- EFI_GUID Guid;
- ///
- /// Vendor-defined variable size data.
- ///
-} VENDOR_DEVICE_PATH;
-
-///
-/// Controller Device Path SubType.
-///
-#define HW_CONTROLLER_DP 0x05
-
-///
-/// Controller Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Controller number.
- ///
- UINT32 ControllerNumber;
-} CONTROLLER_DEVICE_PATH;
-
-///
-/// BMC Device Path SubType.
-///
-#define HW_BMC_DP 0x06
-
-///
-/// BMC Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Interface Type.
- ///
- UINT8 InterfaceType;
- ///
- /// Base Address.
- ///
- UINT8 BaseAddress[8];
-} BMC_DEVICE_PATH;
-
-///
-/// ACPI Device Paths.
-///
-#define ACPI_DEVICE_PATH 0x02
-
-///
-/// ACPI Device Path SubType.
-///
-#define ACPI_DP 0x01
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Device's PnP hardware ID stored in a numeric 32-bit
- /// compressed EISA-type ID. This value must match the
- /// corresponding _HID in the ACPI name space.
- ///
- UINT32 HID;
- ///
- /// Unique ID that is required by ACPI if two devices have the
- /// same _HID. This value must also match the corresponding
- /// _UID/_HID pair in the ACPI name space. Only the 32-bit
- /// numeric value type of _UID is supported. Thus, strings must
- /// not be used for the _UID in the ACPI name space.
- ///
- UINT32 UID;
-} ACPI_HID_DEVICE_PATH;
-
-///
-/// Expanded ACPI Device Path SubType.
-///
-#define ACPI_EXTENDED_DP 0x02
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Device's PnP hardware ID stored in a numeric 32-bit
- /// compressed EISA-type ID. This value must match the
- /// corresponding _HID in the ACPI name space.
- ///
- UINT32 HID;
- ///
- /// Unique ID that is required by ACPI if two devices have the
- /// same _HID. This value must also match the corresponding
- /// _UID/_HID pair in the ACPI name space.
- ///
- UINT32 UID;
- ///
- /// Device's compatible PnP hardware ID stored in a numeric
- /// 32-bit compressed EISA-type ID. This value must match at
- /// least one of the compatible device IDs returned by the
- /// corresponding _CID in the ACPI name space.
- ///
- UINT32 CID;
- ///
- /// Optional variable length _HIDSTR.
- /// Optional variable length _UIDSTR.
- /// Optional variable length _CIDSTR.
- ///
-} ACPI_EXTENDED_HID_DEVICE_PATH;
-
-//
-// EISA ID Macro
-// EISA ID Definition 32-bits
-// bits[15:0] - three character compressed ASCII EISA ID.
-// bits[31:16] - binary number
-// Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z'
-//
-#define PNP_EISA_ID_CONST 0x41d0
-#define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16))
-#define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))
-#define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))
-
-#define PNP_EISA_ID_MASK 0xffff
-#define EISA_ID_TO_NUM(_Id) ((_Id) >> 16)
-
-///
-/// ACPI _ADR Device Path SubType.
-///
-#define ACPI_ADR_DP 0x03
-
-///
-/// The _ADR device path is used to contain video output device attributes to support the Graphics
-/// Output Protocol. The device path can contain multiple _ADR entries if multiple video output
-/// devices are displaying the same output.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// _ADR value. For video output devices the value of this
- /// field comes from Table B-2 of the ACPI 3.0 specification. At
- /// least one _ADR value is required.
- ///
- UINT32 ADR;
- //
- // This device path may optionally contain more than one _ADR entry.
- //
-} ACPI_ADR_DEVICE_PATH;
-
-#define ACPI_ADR_DISPLAY_TYPE_OTHER 0
-#define ACPI_ADR_DISPLAY_TYPE_VGA 1
-#define ACPI_ADR_DISPLAY_TYPE_TV 2
-#define ACPI_ADR_DISPLAY_TYPE_EXTERNAL_DIGITAL 3
-#define ACPI_ADR_DISPLAY_TYPE_INTERNAL_DIGITAL 4
-
-#define ACPI_DISPLAY_ADR(_DeviceIdScheme, _HeadId, _NonVgaOutput, _BiosCanDetect, _VendorInfo, _Type, _Port, _Index) \
- ((UINT32)( ((UINT32)((_DeviceIdScheme) & 0x1) << 31) | \
- (((_HeadId) & 0x7) << 18) | \
- (((_NonVgaOutput) & 0x1) << 17) | \
- (((_BiosCanDetect) & 0x1) << 16) | \
- (((_VendorInfo) & 0xf) << 12) | \
- (((_Type) & 0xf) << 8) | \
- (((_Port) & 0xf) << 4) | \
- ((_Index) & 0xf) ))
-
-///
-/// Messaging Device Paths.
-/// This Device Path is used to describe the connection of devices outside the resource domain of the
-/// system. This Device Path can describe physical messaging information like SCSI ID, or abstract
-/// information like networking protocol IP addresses.
-///
-#define MESSAGING_DEVICE_PATH 0x03
-
-///
-/// ATAPI Device Path SubType
-///
-#define MSG_ATAPI_DP 0x01
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Set to zero for primary, or one for secondary.
- ///
- UINT8 PrimarySecondary;
- ///
- /// Set to zero for master, or one for slave mode.
- ///
- UINT8 SlaveMaster;
- ///
- /// Logical Unit Number.
- ///
- UINT16 Lun;
-} ATAPI_DEVICE_PATH;
-
-///
-/// SCSI Device Path SubType.
-///
-#define MSG_SCSI_DP 0x02
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Target ID on the SCSI bus (PUN).
- ///
- UINT16 Pun;
- ///
- /// Logical Unit Number (LUN).
- ///
- UINT16 Lun;
-} SCSI_DEVICE_PATH;
-
-///
-/// Fibre Channel SubType.
-///
-#define MSG_FIBRECHANNEL_DP 0x03
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Reserved for the future.
- ///
- UINT32 Reserved;
- ///
- /// Fibre Channel World Wide Number.
- ///
- UINT64 WWN;
- ///
- /// Fibre Channel Logical Unit Number.
- ///
- UINT64 Lun;
-} FIBRECHANNEL_DEVICE_PATH;
-
-///
-/// Fibre Channel Ex SubType.
-///
-#define MSG_FIBRECHANNELEX_DP 0x15
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Reserved for the future.
- ///
- UINT32 Reserved;
- ///
- /// 8 byte array containing Fibre Channel End Device Port Name.
- ///
- UINT8 WWN[8];
- ///
- /// 8 byte array containing Fibre Channel Logical Unit Number.
- ///
- UINT8 Lun[8];
-} FIBRECHANNELEX_DEVICE_PATH;
-
-///
-/// 1394 Device Path SubType
-///
-#define MSG_1394_DP 0x04
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Reserved for the future.
- ///
- UINT32 Reserved;
- ///
- /// 1394 Global Unique ID (GUID).
- ///
- UINT64 Guid;
-} F1394_DEVICE_PATH;
-
-///
-/// USB Device Path SubType.
-///
-#define MSG_USB_DP 0x05
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// USB Parent Port Number.
- ///
- UINT8 ParentPortNumber;
- ///
- /// USB Interface Number.
- ///
- UINT8 InterfaceNumber;
-} USB_DEVICE_PATH;
-
-///
-/// USB Class Device Path SubType.
-///
-#define MSG_USB_CLASS_DP 0x0f
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Vendor ID assigned by USB-IF. A value of 0xFFFF will
- /// match any Vendor ID.
- ///
- UINT16 VendorId;
- ///
- /// Product ID assigned by USB-IF. A value of 0xFFFF will
- /// match any Product ID.
- ///
- UINT16 ProductId;
- ///
- /// The class code assigned by the USB-IF. A value of 0xFF
- /// will match any class code.
- ///
- UINT8 DeviceClass;
- ///
- /// The subclass code assigned by the USB-IF. A value of
- /// 0xFF will match any subclass code.
- ///
- UINT8 DeviceSubClass;
- ///
- /// The protocol code assigned by the USB-IF. A value of
- /// 0xFF will match any protocol code.
- ///
- UINT8 DeviceProtocol;
-} USB_CLASS_DEVICE_PATH;
-
-///
-/// USB WWID Device Path SubType.
-///
-#define MSG_USB_WWID_DP 0x10
-
-///
-/// This device path describes a USB device using its serial number.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// USB interface number.
- ///
- UINT16 InterfaceNumber;
- ///
- /// USB vendor id of the device.
- ///
- UINT16 VendorId;
- ///
- /// USB product id of the device.
- ///
- UINT16 ProductId;
- ///
- /// Last 64-or-fewer UTF-16 characters of the USB
- /// serial number. The length of the string is
- /// determined by the Length field less the offset of the
- /// Serial Number field (10)
- ///
- /// CHAR16 SerialNumber[...];
-} USB_WWID_DEVICE_PATH;
-
-///
-/// Device Logical Unit SubType.
-///
-#define MSG_DEVICE_LOGICAL_UNIT_DP 0x11
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Logical Unit Number for the interface.
- ///
- UINT8 Lun;
-} DEVICE_LOGICAL_UNIT_DEVICE_PATH;
-
-///
-/// SATA Device Path SubType.
-///
-#define MSG_SATA_DP 0x12
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// The HBA port number that facilitates the connection to the
- /// device or a port multiplier. The value 0xFFFF is reserved.
- ///
- UINT16 HBAPortNumber;
- ///
- /// The Port multiplier port number that facilitates the connection
- /// to the device. Must be set to 0xFFFF if the device is directly
- /// connected to the HBA.
- ///
- UINT16 PortMultiplierPortNumber;
- ///
- /// Logical Unit Number.
- ///
- UINT16 Lun;
-} SATA_DEVICE_PATH;
-
-///
-/// Flag for if the device is directly connected to the HBA.
-///
-#define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000
-
-///
-/// I2O Device Path SubType.
-///
-#define MSG_I2O_DP 0x06
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Target ID (TID) for a device.
- ///
- UINT32 Tid;
-} I2O_DEVICE_PATH;
-
-///
-/// MAC Address Device Path SubType.
-///
-#define MSG_MAC_ADDR_DP 0x0b
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// The MAC address for a network interface padded with 0s.
- ///
- EFI_MAC_ADDRESS MacAddress;
- ///
- /// Network interface type(i.e. 802.3, FDDI).
- ///
- UINT8 IfType;
-} MAC_ADDR_DEVICE_PATH;
-
-///
-/// IPv4 Device Path SubType
-///
-#define MSG_IPv4_DP 0x0c
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// The local IPv4 address.
- ///
- EFI_IPv4_ADDRESS LocalIpAddress;
- ///
- /// The remote IPv4 address.
- ///
- EFI_IPv4_ADDRESS RemoteIpAddress;
- ///
- /// The local port number.
- ///
- UINT16 LocalPort;
- ///
- /// The remote port number.
- ///
- UINT16 RemotePort;
- ///
- /// The network protocol(i.e. UDP, TCP).
- ///
- UINT16 Protocol;
- ///
- /// 0x00 - The Source IP Address was assigned though DHCP.
- /// 0x01 - The Source IP Address is statically bound.
- ///
- BOOLEAN StaticIpAddress;
- ///
- /// The gateway IP address
- ///
- EFI_IPv4_ADDRESS GatewayIpAddress;
- ///
- /// The subnet mask
- ///
- EFI_IPv4_ADDRESS SubnetMask;
-} IPv4_DEVICE_PATH;
-
-///
-/// IPv6 Device Path SubType.
-///
-#define MSG_IPv6_DP 0x0d
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// The local IPv6 address.
- ///
- EFI_IPv6_ADDRESS LocalIpAddress;
- ///
- /// The remote IPv6 address.
- ///
- EFI_IPv6_ADDRESS RemoteIpAddress;
- ///
- /// The local port number.
- ///
- UINT16 LocalPort;
- ///
- /// The remote port number.
- ///
- UINT16 RemotePort;
- ///
- /// The network protocol(i.e. UDP, TCP).
- ///
- UINT16 Protocol;
- ///
- /// 0x00 - The Local IP Address was manually configured.
- /// 0x01 - The Local IP Address is assigned through IPv6
- /// stateless auto-configuration.
- /// 0x02 - The Local IP Address is assigned through IPv6
- /// stateful configuration.
- ///
- UINT8 IpAddressOrigin;
- ///
- /// The prefix length
- ///
- UINT8 PrefixLength;
- ///
- /// The gateway IP address
- ///
- EFI_IPv6_ADDRESS GatewayIpAddress;
-} IPv6_DEVICE_PATH;
-
-///
-/// InfiniBand Device Path SubType.
-///
-#define MSG_INFINIBAND_DP 0x09
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Flags to help identify/manage InfiniBand device path elements:
- /// Bit 0 - IOC/Service (0b = IOC, 1b = Service).
- /// Bit 1 - Extend Boot Environment.
- /// Bit 2 - Console Protocol.
- /// Bit 3 - Storage Protocol.
- /// Bit 4 - Network Protocol.
- /// All other bits are reserved.
- ///
- UINT32 ResourceFlags;
- ///
- /// 128-bit Global Identifier for remote fabric port.
- ///
- UINT8 PortGid[16];
- ///
- /// 64-bit unique identifier to remote IOC or server process.
- /// Interpretation of field specified by Resource Flags (bit 0).
- ///
- UINT64 ServiceId;
- ///
- /// 64-bit persistent ID of remote IOC port.
- ///
- UINT64 TargetPortId;
- ///
- /// 64-bit persistent ID of remote device.
- ///
- UINT64 DeviceId;
-} INFINIBAND_DEVICE_PATH;
-
-#define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01
-#define INFINIBAND_RESOURCE_FLAG_EXTENDED_BOOT_ENVIRONMENT 0x02
-#define INFINIBAND_RESOURCE_FLAG_CONSOLE_PROTOCOL 0x04
-#define INFINIBAND_RESOURCE_FLAG_STORAGE_PROTOCOL 0x08
-#define INFINIBAND_RESOURCE_FLAG_NETWORK_PROTOCOL 0x10
-
-///
-/// UART Device Path SubType.
-///
-#define MSG_UART_DP 0x0e
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Reserved.
- ///
- UINT32 Reserved;
- ///
- /// The baud rate setting for the UART style device. A value of 0
- /// means that the device's default baud rate will be used.
- ///
- UINT64 BaudRate;
- ///
- /// The number of data bits for the UART style device. A value
- /// of 0 means that the device's default number of data bits will be used.
- ///
- UINT8 DataBits;
- ///
- /// The parity setting for the UART style device.
- /// Parity 0x00 - Default Parity.
- /// Parity 0x01 - No Parity.
- /// Parity 0x02 - Even Parity.
- /// Parity 0x03 - Odd Parity.
- /// Parity 0x04 - Mark Parity.
- /// Parity 0x05 - Space Parity.
- ///
- UINT8 Parity;
- ///
- /// The number of stop bits for the UART style device.
- /// Stop Bits 0x00 - Default Stop Bits.
- /// Stop Bits 0x01 - 1 Stop Bit.
- /// Stop Bits 0x02 - 1.5 Stop Bits.
- /// Stop Bits 0x03 - 2 Stop Bits.
- ///
- UINT8 StopBits;
-} UART_DEVICE_PATH;
-
-///
-/// NVDIMM Namespace Device Path SubType.
-///
-#define NVDIMM_NAMESPACE_DP 0x20
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Namespace unique label identifier UUID.
- ///
- EFI_GUID Uuid;
-} NVDIMM_NAMESPACE_DEVICE_PATH;
-
-//
-// Use VENDOR_DEVICE_PATH struct
-//
-#define MSG_VENDOR_DP 0x0a
-typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH;
-
-#define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID
-#define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID
-#define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID
-#define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID
-
-///
-/// A new device path node is defined to declare flow control characteristics.
-/// UART Flow Control Messaging Device Path
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID.
- ///
- EFI_GUID Guid;
- ///
- /// Bitmap of supported flow control types.
- /// Bit 0 set indicates hardware flow control.
- /// Bit 1 set indicates Xon/Xoff flow control.
- /// All other bits are reserved and are clear.
- ///
- UINT32 FlowControlMap;
-} UART_FLOW_CONTROL_DEVICE_PATH;
-
-#define UART_FLOW_CONTROL_HARDWARE 0x00000001
-#define UART_FLOW_CONTROL_XON_XOFF 0x00000010
-
-#define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID
-///
-/// Serial Attached SCSI (SAS) Device Path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// DEVICE_PATH_MESSAGING_SAS GUID.
- ///
- EFI_GUID Guid;
- ///
- /// Reserved for future use.
- ///
- UINT32 Reserved;
- ///
- /// SAS Address for Serial Attached SCSI Target.
- ///
- UINT64 SasAddress;
- ///
- /// SAS Logical Unit Number.
- ///
- UINT64 Lun;
- ///
- /// More Information about the device and its interconnect.
- ///
- UINT16 DeviceTopology;
- ///
- /// Relative Target Port (RTP).
- ///
- UINT16 RelativeTargetPort;
-} SAS_DEVICE_PATH;
-
-///
-/// Serial Attached SCSI (SAS) Ex Device Path SubType
-///
-#define MSG_SASEX_DP 0x16
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// 8-byte array of the SAS Address for Serial Attached SCSI Target Port.
- ///
- UINT8 SasAddress[8];
- ///
- /// 8-byte array of the SAS Logical Unit Number.
- ///
- UINT8 Lun[8];
- ///
- /// More Information about the device and its interconnect.
- ///
- UINT16 DeviceTopology;
- ///
- /// Relative Target Port (RTP).
- ///
- UINT16 RelativeTargetPort;
-} SASEX_DEVICE_PATH;
-
-///
-/// NvmExpress Namespace Device Path SubType.
-///
-#define MSG_NVME_NAMESPACE_DP 0x17
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- UINT32 NamespaceId;
- UINT64 NamespaceUuid;
-} NVME_NAMESPACE_DEVICE_PATH;
-
-///
-/// DNS Device Path SubType
-///
-#define MSG_DNS_DP 0x1F
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Indicates the DNS server address is IPv4 or IPv6 address.
- ///
- UINT8 IsIPv6;
- ///
- /// Instance of the DNS server address.
- ///
- EFI_IP_ADDRESS DnsServerIp[];
-} DNS_DEVICE_PATH;
-
-///
-/// Uniform Resource Identifiers (URI) Device Path SubType
-///
-#define MSG_URI_DP 0x18
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Instance of the URI pursuant to RFC 3986.
- ///
- CHAR8 Uri[];
-} URI_DEVICE_PATH;
-
-///
-/// Universal Flash Storage (UFS) Device Path SubType.
-///
-#define MSG_UFS_DP 0x19
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Target ID on the UFS bus (PUN).
- ///
- UINT8 Pun;
- ///
- /// Logical Unit Number (LUN).
- ///
- UINT8 Lun;
-} UFS_DEVICE_PATH;
-
-///
-/// SD (Secure Digital) Device Path SubType.
-///
-#define MSG_SD_DP 0x1A
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- UINT8 SlotNumber;
-} SD_DEVICE_PATH;
-
-///
-/// EMMC (Embedded MMC) Device Path SubType.
-///
-#define MSG_EMMC_DP 0x1D
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- UINT8 SlotNumber;
-} EMMC_DEVICE_PATH;
-
-///
-/// iSCSI Device Path SubType
-///
-#define MSG_ISCSI_DP 0x13
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Network Protocol (0 = TCP, 1+ = reserved).
- ///
- UINT16 NetworkProtocol;
- ///
- /// iSCSI Login Options.
- ///
- UINT16 LoginOption;
- ///
- /// iSCSI Logical Unit Number.
- ///
- UINT64 Lun;
- ///
- /// iSCSI Target Portal group tag the initiator intends
- /// to establish a session with.
- ///
- UINT16 TargetPortalGroupTag;
- ///
- /// iSCSI NodeTarget Name. The length of the name
- /// is determined by subtracting the offset of this field from Length.
- ///
- /// CHAR8 iSCSI Target Name.
-} ISCSI_DEVICE_PATH;
-
-#define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000
-#define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002
-#define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000
-#define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008
-#define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000
-#define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000
-#define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000
-#define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000
-
-///
-/// VLAN Device Path SubType.
-///
-#define MSG_VLAN_DP 0x14
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// VLAN identifier (0-4094).
- ///
- UINT16 VlanId;
-} VLAN_DEVICE_PATH;
-
-///
-/// Bluetooth Device Path SubType.
-///
-#define MSG_BLUETOOTH_DP 0x1b
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// 48bit Bluetooth device address.
- ///
- BLUETOOTH_ADDRESS BD_ADDR;
-} BLUETOOTH_DEVICE_PATH;
-
-///
-/// Wi-Fi Device Path SubType.
-///
-#define MSG_WIFI_DP 0x1C
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Service set identifier. A 32-byte octets string.
- ///
- UINT8 SSId[32];
-} WIFI_DEVICE_PATH;
-
-///
-/// Bluetooth LE Device Path SubType.
-///
-#define MSG_BLUETOOTH_LE_DP 0x1E
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- BLUETOOTH_LE_ADDRESS Address;
-} BLUETOOTH_LE_DEVICE_PATH;
-
-//
-// Media Device Path
-//
-#define MEDIA_DEVICE_PATH 0x04
-
-///
-/// Hard Drive Media Device Path SubType.
-///
-#define MEDIA_HARDDRIVE_DP 0x01
-
-///
-/// The Hard Drive Media Device Path is used to represent a partition on a hard drive.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Describes the entry in a partition table, starting with entry 1.
- /// Partition number zero represents the entire device. Valid
- /// partition numbers for a MBR partition are [1, 4]. Valid
- /// partition numbers for a GPT partition are [1, NumberOfPartitionEntries].
- ///
- UINT32 PartitionNumber;
- ///
- /// Starting LBA of the partition on the hard drive.
- ///
- UINT64 PartitionStart;
- ///
- /// Size of the partition in units of Logical Blocks.
- ///
- UINT64 PartitionSize;
- ///
- /// Signature unique to this partition:
- /// If SignatureType is 0, this field has to be initialized with 16 zeros.
- /// If SignatureType is 1, the MBR signature is stored in the first 4 bytes of this field.
- /// The other 12 bytes are initialized with zeros.
- /// If SignatureType is 2, this field contains a 16 byte signature.
- ///
- UINT8 Signature[16];
- ///
- /// Partition Format: (Unused values reserved).
- /// 0x01 - PC-AT compatible legacy MBR.
- /// 0x02 - GUID Partition Table.
- ///
- UINT8 MBRType;
- ///
- /// Type of Disk Signature: (Unused values reserved).
- /// 0x00 - No Disk Signature.
- /// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR.
- /// 0x02 - GUID signature.
- ///
- UINT8 SignatureType;
-} HARDDRIVE_DEVICE_PATH;
-
-#define MBR_TYPE_PCAT 0x01
-#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02
-
-#define NO_DISK_SIGNATURE 0x00
-#define SIGNATURE_TYPE_MBR 0x01
-#define SIGNATURE_TYPE_GUID 0x02
-
-///
-/// CD-ROM Media Device Path SubType.
-///
-#define MEDIA_CDROM_DP 0x02
-
-///
-/// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero.
- ///
- UINT32 BootEntry;
- ///
- /// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing.
- ///
- UINT64 PartitionStart;
- ///
- /// Size of the partition in units of Blocks, also called Sectors.
- ///
- UINT64 PartitionSize;
-} CDROM_DEVICE_PATH;
-
-//
-// Use VENDOR_DEVICE_PATH struct
-//
-#define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype.
-
-///
-/// File Path Media Device Path SubType
-///
-#define MEDIA_FILEPATH_DP 0x04
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// A NULL-terminated Path string including directory and file names.
- ///
- CHAR16 PathName[1];
-} FILEPATH_DEVICE_PATH;
-
-#define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName)
-
-///
-/// Media Protocol Device Path SubType.
-///
-#define MEDIA_PROTOCOL_DP 0x05
-
-///
-/// The Media Protocol Device Path is used to denote the protocol that is being
-/// used in a device path at the location of the path specified.
-/// Many protocols are inherent to the style of device path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// The ID of the protocol.
- ///
- EFI_GUID Protocol;
-} MEDIA_PROTOCOL_DEVICE_PATH;
-
-///
-/// PIWG Firmware File SubType.
-///
-#define MEDIA_PIWG_FW_FILE_DP 0x06
-
-///
-/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Firmware file name
- ///
- EFI_GUID FvFileName;
-} MEDIA_FW_VOL_FILEPATH_DEVICE_PATH;
-
-///
-/// PIWG Firmware Volume Device Path SubType.
-///
-#define MEDIA_PIWG_FW_VOL_DP 0x07
-
-///
-/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Firmware volume name.
- ///
- EFI_GUID FvName;
-} MEDIA_FW_VOL_DEVICE_PATH;
-
-///
-/// Media relative offset range device path.
-///
-#define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08
-
-///
-/// Used to describe the offset range of media relative.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- UINT32 Reserved;
- UINT64 StartingOffset;
- UINT64 EndingOffset;
-} MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH;
-
-///
-/// This GUID defines a RAM Disk supporting a raw disk format in volatile memory.
-///
-#define EFI_VIRTUAL_DISK_GUID \
- { \
- 0x77AB535A, 0x45FC, 0x624B, {0x55, 0x60, 0xF7, 0xB2, 0x81, 0xD1, 0xF9, 0x6E } \
- }
-
-extern EFI_GUID gEfiVirtualDiskGuid;
-
-///
-/// This GUID defines a RAM Disk supporting an ISO image in volatile memory.
-///
-#define EFI_VIRTUAL_CD_GUID \
- { \
- 0x3D5ABD30, 0x4175, 0x87CE, {0x6D, 0x64, 0xD2, 0xAD, 0xE5, 0x23, 0xC4, 0xBB } \
- }
-extern EFI_GUID gEfiVirtualCdGuid;
-
-///
-/// This GUID defines a RAM Disk supporting a raw disk format in persistent memory.
-///
-#define EFI_PERSISTENT_VIRTUAL_DISK_GUID \
- { \
- 0x5CEA02C9, 0x4D07, 0x69D3, {0x26, 0x9F ,0x44, 0x96, 0xFB, 0xE0, 0x96, 0xF9 } \
- }
-
-extern EFI_GUID gEfiPersistentVirtualDiskGuid;
-
-///
-/// This GUID defines a RAM Disk supporting an ISO image in persistent memory.
-///
-#define EFI_PERSISTENT_VIRTUAL_CD_GUID \
- { \
- 0x08018188, 0x42CD, 0xBB48, {0x10, 0x0F, 0x53, 0x87, 0xD5, 0x3D, 0xED, 0x3D } \
- }
-
-extern EFI_GUID gEfiPersistentVirtualCdGuid;
-
-///
-/// Media ram disk device path.
-///
-#define MEDIA_RAM_DISK_DP 0x09
-
-///
-/// Used to describe the ram disk device path.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Starting Memory Address.
- ///
- UINT32 StartingAddr[2];
- ///
- /// Ending Memory Address.
- ///
- UINT32 EndingAddr[2];
- ///
- /// GUID that defines the type of the RAM Disk.
- ///
- EFI_GUID TypeGuid;
- ///
- /// RAM Diskinstance number, if supported. The default value is zero.
- ///
- UINT16 Instance;
-} MEDIA_RAM_DISK_DEVICE_PATH;
-
-///
-/// BIOS Boot Specification Device Path.
-///
-#define BBS_DEVICE_PATH 0x05
-
-///
-/// BIOS Boot Specification Device Path SubType.
-///
-#define BBS_BBS_DP 0x01
-
-///
-/// This Device Path is used to describe the booting of non-EFI-aware operating systems.
-///
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- ///
- /// Device Type as defined by the BIOS Boot Specification.
- ///
- UINT16 DeviceType;
- ///
- /// Status Flags as defined by the BIOS Boot Specification.
- ///
- UINT16 StatusFlag;
- ///
- /// Null-terminated ASCII string that describes the boot device to a user.
- ///
- CHAR8 String[1];
-} BBS_BBS_DEVICE_PATH;
-
-//
-// DeviceType definitions - from BBS specification
-//
-#define BBS_TYPE_FLOPPY 0x01
-#define BBS_TYPE_HARDDRIVE 0x02
-#define BBS_TYPE_CDROM 0x03
-#define BBS_TYPE_PCMCIA 0x04
-#define BBS_TYPE_USB 0x05
-#define BBS_TYPE_EMBEDDED_NETWORK 0x06
-#define BBS_TYPE_BEV 0x80
-#define BBS_TYPE_UNKNOWN 0xFF
-
-
-///
-/// Union of all possible Device Paths and pointers to Device Paths.
-///
-typedef union {
- EFI_DEVICE_PATH_PROTOCOL DevPath;
- PCI_DEVICE_PATH Pci;
- PCCARD_DEVICE_PATH PcCard;
- MEMMAP_DEVICE_PATH MemMap;
- VENDOR_DEVICE_PATH Vendor;
-
- CONTROLLER_DEVICE_PATH Controller;
- BMC_DEVICE_PATH Bmc;
- ACPI_HID_DEVICE_PATH Acpi;
- ACPI_EXTENDED_HID_DEVICE_PATH ExtendedAcpi;
- ACPI_ADR_DEVICE_PATH AcpiAdr;
-
- ATAPI_DEVICE_PATH Atapi;
- SCSI_DEVICE_PATH Scsi;
- ISCSI_DEVICE_PATH Iscsi;
- FIBRECHANNEL_DEVICE_PATH FibreChannel;
- FIBRECHANNELEX_DEVICE_PATH FibreChannelEx;
-
- F1394_DEVICE_PATH F1394;
- USB_DEVICE_PATH Usb;
- SATA_DEVICE_PATH Sata;
- USB_CLASS_DEVICE_PATH UsbClass;
- USB_WWID_DEVICE_PATH UsbWwid;
- DEVICE_LOGICAL_UNIT_DEVICE_PATH LogicUnit;
- I2O_DEVICE_PATH I2O;
- MAC_ADDR_DEVICE_PATH MacAddr;
- IPv4_DEVICE_PATH Ipv4;
- IPv6_DEVICE_PATH Ipv6;
- VLAN_DEVICE_PATH Vlan;
- INFINIBAND_DEVICE_PATH InfiniBand;
- UART_DEVICE_PATH Uart;
- UART_FLOW_CONTROL_DEVICE_PATH UartFlowControl;
- SAS_DEVICE_PATH Sas;
- SASEX_DEVICE_PATH SasEx;
- NVME_NAMESPACE_DEVICE_PATH NvmeNamespace;
- DNS_DEVICE_PATH Dns;
- URI_DEVICE_PATH Uri;
- BLUETOOTH_DEVICE_PATH Bluetooth;
- WIFI_DEVICE_PATH WiFi;
- UFS_DEVICE_PATH Ufs;
- SD_DEVICE_PATH Sd;
- EMMC_DEVICE_PATH Emmc;
- HARDDRIVE_DEVICE_PATH HardDrive;
- CDROM_DEVICE_PATH CD;
-
- FILEPATH_DEVICE_PATH FilePath;
- MEDIA_PROTOCOL_DEVICE_PATH MediaProtocol;
-
- MEDIA_FW_VOL_DEVICE_PATH FirmwareVolume;
- MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FirmwareFile;
- MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH Offset;
- MEDIA_RAM_DISK_DEVICE_PATH RamDisk;
- BBS_BBS_DEVICE_PATH Bbs;
-} EFI_DEV_PATH;
-
-
-
-typedef union {
- EFI_DEVICE_PATH_PROTOCOL *DevPath;
- PCI_DEVICE_PATH *Pci;
- PCCARD_DEVICE_PATH *PcCard;
- MEMMAP_DEVICE_PATH *MemMap;
- VENDOR_DEVICE_PATH *Vendor;
-
- CONTROLLER_DEVICE_PATH *Controller;
- BMC_DEVICE_PATH *Bmc;
- ACPI_HID_DEVICE_PATH *Acpi;
- ACPI_EXTENDED_HID_DEVICE_PATH *ExtendedAcpi;
- ACPI_ADR_DEVICE_PATH *AcpiAdr;
-
- ATAPI_DEVICE_PATH *Atapi;
- SCSI_DEVICE_PATH *Scsi;
- ISCSI_DEVICE_PATH *Iscsi;
- FIBRECHANNEL_DEVICE_PATH *FibreChannel;
- FIBRECHANNELEX_DEVICE_PATH *FibreChannelEx;
-
- F1394_DEVICE_PATH *F1394;
- USB_DEVICE_PATH *Usb;
- SATA_DEVICE_PATH *Sata;
- USB_CLASS_DEVICE_PATH *UsbClass;
- USB_WWID_DEVICE_PATH *UsbWwid;
- DEVICE_LOGICAL_UNIT_DEVICE_PATH *LogicUnit;
- I2O_DEVICE_PATH *I2O;
- MAC_ADDR_DEVICE_PATH *MacAddr;
- IPv4_DEVICE_PATH *Ipv4;
- IPv6_DEVICE_PATH *Ipv6;
- VLAN_DEVICE_PATH *Vlan;
- INFINIBAND_DEVICE_PATH *InfiniBand;
- UART_DEVICE_PATH *Uart;
- UART_FLOW_CONTROL_DEVICE_PATH *UartFlowControl;
- SAS_DEVICE_PATH *Sas;
- SASEX_DEVICE_PATH *SasEx;
- NVME_NAMESPACE_DEVICE_PATH *NvmeNamespace;
- DNS_DEVICE_PATH *Dns;
- URI_DEVICE_PATH *Uri;
- BLUETOOTH_DEVICE_PATH *Bluetooth;
- WIFI_DEVICE_PATH *WiFi;
- UFS_DEVICE_PATH *Ufs;
- SD_DEVICE_PATH *Sd;
- EMMC_DEVICE_PATH *Emmc;
- HARDDRIVE_DEVICE_PATH *HardDrive;
- CDROM_DEVICE_PATH *CD;
-
- FILEPATH_DEVICE_PATH *FilePath;
- MEDIA_PROTOCOL_DEVICE_PATH *MediaProtocol;
-
- MEDIA_FW_VOL_DEVICE_PATH *FirmwareVolume;
- MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FirmwareFile;
- MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH *Offset;
- MEDIA_RAM_DISK_DEVICE_PATH *RamDisk;
- BBS_BBS_DEVICE_PATH *Bbs;
- UINT8 *Raw;
-} EFI_DEV_PATH_PTR;
-
-#define EFI_DEBUGPORT_PROTOCOL_GUID \
- { \
- 0xEBA4E8D2, 0x3858, 0x41EC, {0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 } \
- }
-//
-// DEBUGPORT variable definitions...
-//
-#define EFI_DEBUGPORT_VARIABLE_NAME L"DEBUGPORT"
-#define EFI_DEBUGPORT_VARIABLE_GUID EFI_DEBUGPORT_PROTOCOL_GUID
-extern EFI_GUID gEfiDebugPortVariableGuid;
-
-//
-// DebugPort device path definitions...
-//
-#define DEVICE_PATH_MESSAGING_DEBUGPORT EFI_DEBUGPORT_PROTOCOL_GUID
-extern EFI_GUID gEfiDebugPortProtocolGuid;
-
-typedef struct {
- EFI_DEVICE_PATH_PROTOCOL Header;
- EFI_GUID Guid;
-} DEBUGPORT_DEVICE_PATH;
-
-#pragma pack()
-
-#define END_DEVICE_PATH_TYPE 0x7f
-#define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF
-#define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01
-
-extern EFI_GUID gEfiDevicePathProtocolGuid;
-
-#endif
+/** @file
+ The device path protocol as defined in UEFI 2.0.
+
+ The device path represents a programmatic path to a device,
+ from a software point of view. The path must persist from boot to boot, so
+ it can not contain things like PCI bus numbers that change from boot to boot.
+
+Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __EFI_DEVICE_PATH_H__
+#define __EFI_DEVICE_PATH_H__
+
+#include <Guid/PcAnsi.h>
+#include <IndustryStandard/Acpi30.h>
+#include <IndustryStandard/Bluetooth.h>
+
+///
+/// Device Path protocol.
+///
+#define EFI_DEVICE_PATH_PROTOCOL_GUID \
+ { \
+ 0x9576e91, 0x6d3f, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
+ }
+
+///
+/// Device Path guid definition for backward-compatible with EFI1.1.
+///
+#define DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH_PROTOCOL_GUID
+
+#pragma pack(1)
+
+#if defined(_MSC_EXTENSIONS)
+//
+// Disable warning when last field of data structure is a zero sized array.
+//
+#pragma warning ( disable : 4200 )
+#endif
+
+/**
+ This protocol can be used on any device handle to obtain generic path/location
+ information concerning the physical device or logical device. If the handle does
+ not logically map to a physical device, the handle may not necessarily support
+ the device path protocol. The device path describes the location of the device
+ the handle is for. The size of the Device Path can be determined from the structures
+ that make up the Device Path.
+**/
+typedef struct {
+ UINT8 Type; ///< 0x01 Hardware Device Path.
+ ///< 0x02 ACPI Device Path.
+ ///< 0x03 Messaging Device Path.
+ ///< 0x04 Media Device Path.
+ ///< 0x05 BIOS Boot Specification Device Path.
+ ///< 0x7F End of Hardware Device Path.
+
+ UINT8 SubType; ///< Varies by Type
+ ///< 0xFF End Entire Device Path, or
+ ///< 0x01 End This Instance of a Device Path and start a new
+ ///< Device Path.
+
+ UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define
+ ///< type of data. Size of data is included in Length.
+
+} EFI_DEVICE_PATH_PROTOCOL;
+
+///
+/// Device Path protocol definition for backward-compatible with EFI1.1.
+///
+typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH;
+
+///
+/// Hardware Device Paths.
+///
+#define HARDWARE_DEVICE_PATH 0x01
+
+///
+/// PCI Device Path SubType.
+///
+#define HW_PCI_DP 0x01
+
+///
+/// PCI Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// PCI Function Number.
+ ///
+ UINT8 Function;
+ ///
+ /// PCI Device Number.
+ ///
+ UINT8 Device;
+} PCI_DEVICE_PATH;
+
+///
+/// PCCARD Device Path SubType.
+///
+#define HW_PCCARD_DP 0x02
+
+///
+/// PCCARD Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Function Number (0 = First Function).
+ ///
+ UINT8 FunctionNumber;
+} PCCARD_DEVICE_PATH;
+
+///
+/// Memory Mapped Device Path SubType.
+///
+#define HW_MEMMAP_DP 0x03
+
+///
+/// Memory Mapped Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// EFI_MEMORY_TYPE
+ ///
+ UINT32 MemoryType;
+ ///
+ /// Starting Memory Address.
+ ///
+ EFI_PHYSICAL_ADDRESS StartingAddress;
+ ///
+ /// Ending Memory Address.
+ ///
+ EFI_PHYSICAL_ADDRESS EndingAddress;
+} MEMMAP_DEVICE_PATH;
+
+///
+/// Hardware Vendor Device Path SubType.
+///
+#define HW_VENDOR_DP 0x04
+
+///
+/// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must
+/// allocate a Vendor GUID for a Device Path. The Vendor GUID can then be used to define the
+/// contents on the n bytes that follow in the Vendor Device Path node.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Vendor-assigned GUID that defines the data that follows.
+ ///
+ EFI_GUID Guid;
+ ///
+ /// Vendor-defined variable size data.
+ ///
+} VENDOR_DEVICE_PATH;
+
+///
+/// Controller Device Path SubType.
+///
+#define HW_CONTROLLER_DP 0x05
+
+///
+/// Controller Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Controller number.
+ ///
+ UINT32 ControllerNumber;
+} CONTROLLER_DEVICE_PATH;
+
+///
+/// BMC Device Path SubType.
+///
+#define HW_BMC_DP 0x06
+
+///
+/// BMC Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Interface Type.
+ ///
+ UINT8 InterfaceType;
+ ///
+ /// Base Address.
+ ///
+ UINT8 BaseAddress[8];
+} BMC_DEVICE_PATH;
+
+///
+/// ACPI Device Paths.
+///
+#define ACPI_DEVICE_PATH 0x02
+
+///
+/// ACPI Device Path SubType.
+///
+#define ACPI_DP 0x01
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Device's PnP hardware ID stored in a numeric 32-bit
+ /// compressed EISA-type ID. This value must match the
+ /// corresponding _HID in the ACPI name space.
+ ///
+ UINT32 HID;
+ ///
+ /// Unique ID that is required by ACPI if two devices have the
+ /// same _HID. This value must also match the corresponding
+ /// _UID/_HID pair in the ACPI name space. Only the 32-bit
+ /// numeric value type of _UID is supported. Thus, strings must
+ /// not be used for the _UID in the ACPI name space.
+ ///
+ UINT32 UID;
+} ACPI_HID_DEVICE_PATH;
+
+///
+/// Expanded ACPI Device Path SubType.
+///
+#define ACPI_EXTENDED_DP 0x02
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Device's PnP hardware ID stored in a numeric 32-bit
+ /// compressed EISA-type ID. This value must match the
+ /// corresponding _HID in the ACPI name space.
+ ///
+ UINT32 HID;
+ ///
+ /// Unique ID that is required by ACPI if two devices have the
+ /// same _HID. This value must also match the corresponding
+ /// _UID/_HID pair in the ACPI name space.
+ ///
+ UINT32 UID;
+ ///
+ /// Device's compatible PnP hardware ID stored in a numeric
+ /// 32-bit compressed EISA-type ID. This value must match at
+ /// least one of the compatible device IDs returned by the
+ /// corresponding _CID in the ACPI name space.
+ ///
+ UINT32 CID;
+ ///
+ /// Optional variable length _HIDSTR.
+ /// Optional variable length _UIDSTR.
+ /// Optional variable length _CIDSTR.
+ ///
+} ACPI_EXTENDED_HID_DEVICE_PATH;
+
+//
+// EISA ID Macro
+// EISA ID Definition 32-bits
+// bits[15:0] - three character compressed ASCII EISA ID.
+// bits[31:16] - binary number
+// Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z'
+//
+#define PNP_EISA_ID_CONST 0x41d0
+#define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16))
+#define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))
+#define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId)))
+
+#define PNP_EISA_ID_MASK 0xffff
+#define EISA_ID_TO_NUM(_Id) ((_Id) >> 16)
+
+///
+/// ACPI _ADR Device Path SubType.
+///
+#define ACPI_ADR_DP 0x03
+
+///
+/// The _ADR device path is used to contain video output device attributes to support the Graphics
+/// Output Protocol. The device path can contain multiple _ADR entries if multiple video output
+/// devices are displaying the same output.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// _ADR value. For video output devices the value of this
+ /// field comes from Table B-2 of the ACPI 3.0 specification. At
+ /// least one _ADR value is required.
+ ///
+ UINT32 ADR;
+ //
+ // This device path may optionally contain more than one _ADR entry.
+ //
+} ACPI_ADR_DEVICE_PATH;
+
+#define ACPI_ADR_DISPLAY_TYPE_OTHER 0
+#define ACPI_ADR_DISPLAY_TYPE_VGA 1
+#define ACPI_ADR_DISPLAY_TYPE_TV 2
+#define ACPI_ADR_DISPLAY_TYPE_EXTERNAL_DIGITAL 3
+#define ACPI_ADR_DISPLAY_TYPE_INTERNAL_DIGITAL 4
+
+#define ACPI_DISPLAY_ADR(_DeviceIdScheme, _HeadId, _NonVgaOutput, _BiosCanDetect, _VendorInfo, _Type, _Port, _Index) \
+ ((UINT32)( ((UINT32)((_DeviceIdScheme) & 0x1) << 31) | \
+ (((_HeadId) & 0x7) << 18) | \
+ (((_NonVgaOutput) & 0x1) << 17) | \
+ (((_BiosCanDetect) & 0x1) << 16) | \
+ (((_VendorInfo) & 0xf) << 12) | \
+ (((_Type) & 0xf) << 8) | \
+ (((_Port) & 0xf) << 4) | \
+ ((_Index) & 0xf) ))
+
+///
+/// Messaging Device Paths.
+/// This Device Path is used to describe the connection of devices outside the resource domain of the
+/// system. This Device Path can describe physical messaging information like SCSI ID, or abstract
+/// information like networking protocol IP addresses.
+///
+#define MESSAGING_DEVICE_PATH 0x03
+
+///
+/// ATAPI Device Path SubType
+///
+#define MSG_ATAPI_DP 0x01
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Set to zero for primary, or one for secondary.
+ ///
+ UINT8 PrimarySecondary;
+ ///
+ /// Set to zero for master, or one for slave mode.
+ ///
+ UINT8 SlaveMaster;
+ ///
+ /// Logical Unit Number.
+ ///
+ UINT16 Lun;
+} ATAPI_DEVICE_PATH;
+
+///
+/// SCSI Device Path SubType.
+///
+#define MSG_SCSI_DP 0x02
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Target ID on the SCSI bus (PUN).
+ ///
+ UINT16 Pun;
+ ///
+ /// Logical Unit Number (LUN).
+ ///
+ UINT16 Lun;
+} SCSI_DEVICE_PATH;
+
+///
+/// Fibre Channel SubType.
+///
+#define MSG_FIBRECHANNEL_DP 0x03
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Reserved for the future.
+ ///
+ UINT32 Reserved;
+ ///
+ /// Fibre Channel World Wide Number.
+ ///
+ UINT64 WWN;
+ ///
+ /// Fibre Channel Logical Unit Number.
+ ///
+ UINT64 Lun;
+} FIBRECHANNEL_DEVICE_PATH;
+
+///
+/// Fibre Channel Ex SubType.
+///
+#define MSG_FIBRECHANNELEX_DP 0x15
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Reserved for the future.
+ ///
+ UINT32 Reserved;
+ ///
+ /// 8 byte array containing Fibre Channel End Device Port Name.
+ ///
+ UINT8 WWN[8];
+ ///
+ /// 8 byte array containing Fibre Channel Logical Unit Number.
+ ///
+ UINT8 Lun[8];
+} FIBRECHANNELEX_DEVICE_PATH;
+
+///
+/// 1394 Device Path SubType
+///
+#define MSG_1394_DP 0x04
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Reserved for the future.
+ ///
+ UINT32 Reserved;
+ ///
+ /// 1394 Global Unique ID (GUID).
+ ///
+ UINT64 Guid;
+} F1394_DEVICE_PATH;
+
+///
+/// USB Device Path SubType.
+///
+#define MSG_USB_DP 0x05
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// USB Parent Port Number.
+ ///
+ UINT8 ParentPortNumber;
+ ///
+ /// USB Interface Number.
+ ///
+ UINT8 InterfaceNumber;
+} USB_DEVICE_PATH;
+
+///
+/// USB Class Device Path SubType.
+///
+#define MSG_USB_CLASS_DP 0x0f
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Vendor ID assigned by USB-IF. A value of 0xFFFF will
+ /// match any Vendor ID.
+ ///
+ UINT16 VendorId;
+ ///
+ /// Product ID assigned by USB-IF. A value of 0xFFFF will
+ /// match any Product ID.
+ ///
+ UINT16 ProductId;
+ ///
+ /// The class code assigned by the USB-IF. A value of 0xFF
+ /// will match any class code.
+ ///
+ UINT8 DeviceClass;
+ ///
+ /// The subclass code assigned by the USB-IF. A value of
+ /// 0xFF will match any subclass code.
+ ///
+ UINT8 DeviceSubClass;
+ ///
+ /// The protocol code assigned by the USB-IF. A value of
+ /// 0xFF will match any protocol code.
+ ///
+ UINT8 DeviceProtocol;
+} USB_CLASS_DEVICE_PATH;
+
+///
+/// USB WWID Device Path SubType.
+///
+#define MSG_USB_WWID_DP 0x10
+
+///
+/// This device path describes a USB device using its serial number.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// USB interface number.
+ ///
+ UINT16 InterfaceNumber;
+ ///
+ /// USB vendor id of the device.
+ ///
+ UINT16 VendorId;
+ ///
+ /// USB product id of the device.
+ ///
+ UINT16 ProductId;
+ ///
+ /// Last 64-or-fewer UTF-16 characters of the USB
+ /// serial number. The length of the string is
+ /// determined by the Length field less the offset of the
+ /// Serial Number field (10)
+ ///
+ /// CHAR16 SerialNumber[...];
+} USB_WWID_DEVICE_PATH;
+
+///
+/// Device Logical Unit SubType.
+///
+#define MSG_DEVICE_LOGICAL_UNIT_DP 0x11
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Logical Unit Number for the interface.
+ ///
+ UINT8 Lun;
+} DEVICE_LOGICAL_UNIT_DEVICE_PATH;
+
+///
+/// SATA Device Path SubType.
+///
+#define MSG_SATA_DP 0x12
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// The HBA port number that facilitates the connection to the
+ /// device or a port multiplier. The value 0xFFFF is reserved.
+ ///
+ UINT16 HBAPortNumber;
+ ///
+ /// The Port multiplier port number that facilitates the connection
+ /// to the device. Must be set to 0xFFFF if the device is directly
+ /// connected to the HBA.
+ ///
+ UINT16 PortMultiplierPortNumber;
+ ///
+ /// Logical Unit Number.
+ ///
+ UINT16 Lun;
+} SATA_DEVICE_PATH;
+
+///
+/// Flag for if the device is directly connected to the HBA.
+///
+#define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000
+
+///
+/// I2O Device Path SubType.
+///
+#define MSG_I2O_DP 0x06
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Target ID (TID) for a device.
+ ///
+ UINT32 Tid;
+} I2O_DEVICE_PATH;
+
+///
+/// MAC Address Device Path SubType.
+///
+#define MSG_MAC_ADDR_DP 0x0b
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// The MAC address for a network interface padded with 0s.
+ ///
+ EFI_MAC_ADDRESS MacAddress;
+ ///
+ /// Network interface type(i.e. 802.3, FDDI).
+ ///
+ UINT8 IfType;
+} MAC_ADDR_DEVICE_PATH;
+
+///
+/// IPv4 Device Path SubType
+///
+#define MSG_IPv4_DP 0x0c
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// The local IPv4 address.
+ ///
+ EFI_IPv4_ADDRESS LocalIpAddress;
+ ///
+ /// The remote IPv4 address.
+ ///
+ EFI_IPv4_ADDRESS RemoteIpAddress;
+ ///
+ /// The local port number.
+ ///
+ UINT16 LocalPort;
+ ///
+ /// The remote port number.
+ ///
+ UINT16 RemotePort;
+ ///
+ /// The network protocol(i.e. UDP, TCP).
+ ///
+ UINT16 Protocol;
+ ///
+ /// 0x00 - The Source IP Address was assigned though DHCP.
+ /// 0x01 - The Source IP Address is statically bound.
+ ///
+ BOOLEAN StaticIpAddress;
+ ///
+ /// The gateway IP address
+ ///
+ EFI_IPv4_ADDRESS GatewayIpAddress;
+ ///
+ /// The subnet mask
+ ///
+ EFI_IPv4_ADDRESS SubnetMask;
+} IPv4_DEVICE_PATH;
+
+///
+/// IPv6 Device Path SubType.
+///
+#define MSG_IPv6_DP 0x0d
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// The local IPv6 address.
+ ///
+ EFI_IPv6_ADDRESS LocalIpAddress;
+ ///
+ /// The remote IPv6 address.
+ ///
+ EFI_IPv6_ADDRESS RemoteIpAddress;
+ ///
+ /// The local port number.
+ ///
+ UINT16 LocalPort;
+ ///
+ /// The remote port number.
+ ///
+ UINT16 RemotePort;
+ ///
+ /// The network protocol(i.e. UDP, TCP).
+ ///
+ UINT16 Protocol;
+ ///
+ /// 0x00 - The Local IP Address was manually configured.
+ /// 0x01 - The Local IP Address is assigned through IPv6
+ /// stateless auto-configuration.
+ /// 0x02 - The Local IP Address is assigned through IPv6
+ /// stateful configuration.
+ ///
+ UINT8 IpAddressOrigin;
+ ///
+ /// The prefix length
+ ///
+ UINT8 PrefixLength;
+ ///
+ /// The gateway IP address
+ ///
+ EFI_IPv6_ADDRESS GatewayIpAddress;
+} IPv6_DEVICE_PATH;
+
+///
+/// InfiniBand Device Path SubType.
+///
+#define MSG_INFINIBAND_DP 0x09
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Flags to help identify/manage InfiniBand device path elements:
+ /// Bit 0 - IOC/Service (0b = IOC, 1b = Service).
+ /// Bit 1 - Extend Boot Environment.
+ /// Bit 2 - Console Protocol.
+ /// Bit 3 - Storage Protocol.
+ /// Bit 4 - Network Protocol.
+ /// All other bits are reserved.
+ ///
+ UINT32 ResourceFlags;
+ ///
+ /// 128-bit Global Identifier for remote fabric port.
+ ///
+ UINT8 PortGid[16];
+ ///
+ /// 64-bit unique identifier to remote IOC or server process.
+ /// Interpretation of field specified by Resource Flags (bit 0).
+ ///
+ UINT64 ServiceId;
+ ///
+ /// 64-bit persistent ID of remote IOC port.
+ ///
+ UINT64 TargetPortId;
+ ///
+ /// 64-bit persistent ID of remote device.
+ ///
+ UINT64 DeviceId;
+} INFINIBAND_DEVICE_PATH;
+
+#define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01
+#define INFINIBAND_RESOURCE_FLAG_EXTENDED_BOOT_ENVIRONMENT 0x02
+#define INFINIBAND_RESOURCE_FLAG_CONSOLE_PROTOCOL 0x04
+#define INFINIBAND_RESOURCE_FLAG_STORAGE_PROTOCOL 0x08
+#define INFINIBAND_RESOURCE_FLAG_NETWORK_PROTOCOL 0x10
+
+///
+/// UART Device Path SubType.
+///
+#define MSG_UART_DP 0x0e
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Reserved.
+ ///
+ UINT32 Reserved;
+ ///
+ /// The baud rate setting for the UART style device. A value of 0
+ /// means that the device's default baud rate will be used.
+ ///
+ UINT64 BaudRate;
+ ///
+ /// The number of data bits for the UART style device. A value
+ /// of 0 means that the device's default number of data bits will be used.
+ ///
+ UINT8 DataBits;
+ ///
+ /// The parity setting for the UART style device.
+ /// Parity 0x00 - Default Parity.
+ /// Parity 0x01 - No Parity.
+ /// Parity 0x02 - Even Parity.
+ /// Parity 0x03 - Odd Parity.
+ /// Parity 0x04 - Mark Parity.
+ /// Parity 0x05 - Space Parity.
+ ///
+ UINT8 Parity;
+ ///
+ /// The number of stop bits for the UART style device.
+ /// Stop Bits 0x00 - Default Stop Bits.
+ /// Stop Bits 0x01 - 1 Stop Bit.
+ /// Stop Bits 0x02 - 1.5 Stop Bits.
+ /// Stop Bits 0x03 - 2 Stop Bits.
+ ///
+ UINT8 StopBits;
+} UART_DEVICE_PATH;
+
+///
+/// NVDIMM Namespace Device Path SubType.
+///
+#define NVDIMM_NAMESPACE_DP 0x20
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Namespace unique label identifier UUID.
+ ///
+ EFI_GUID Uuid;
+} NVDIMM_NAMESPACE_DEVICE_PATH;
+
+//
+// Use VENDOR_DEVICE_PATH struct
+//
+#define MSG_VENDOR_DP 0x0a
+typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH;
+
+#define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID
+#define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID
+#define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID
+#define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID
+
+///
+/// A new device path node is defined to declare flow control characteristics.
+/// UART Flow Control Messaging Device Path
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID.
+ ///
+ EFI_GUID Guid;
+ ///
+ /// Bitmap of supported flow control types.
+ /// Bit 0 set indicates hardware flow control.
+ /// Bit 1 set indicates Xon/Xoff flow control.
+ /// All other bits are reserved and are clear.
+ ///
+ UINT32 FlowControlMap;
+} UART_FLOW_CONTROL_DEVICE_PATH;
+
+#define UART_FLOW_CONTROL_HARDWARE 0x00000001
+#define UART_FLOW_CONTROL_XON_XOFF 0x00000010
+
+#define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID
+///
+/// Serial Attached SCSI (SAS) Device Path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// DEVICE_PATH_MESSAGING_SAS GUID.
+ ///
+ EFI_GUID Guid;
+ ///
+ /// Reserved for future use.
+ ///
+ UINT32 Reserved;
+ ///
+ /// SAS Address for Serial Attached SCSI Target.
+ ///
+ UINT64 SasAddress;
+ ///
+ /// SAS Logical Unit Number.
+ ///
+ UINT64 Lun;
+ ///
+ /// More Information about the device and its interconnect.
+ ///
+ UINT16 DeviceTopology;
+ ///
+ /// Relative Target Port (RTP).
+ ///
+ UINT16 RelativeTargetPort;
+} SAS_DEVICE_PATH;
+
+///
+/// Serial Attached SCSI (SAS) Ex Device Path SubType
+///
+#define MSG_SASEX_DP 0x16
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// 8-byte array of the SAS Address for Serial Attached SCSI Target Port.
+ ///
+ UINT8 SasAddress[8];
+ ///
+ /// 8-byte array of the SAS Logical Unit Number.
+ ///
+ UINT8 Lun[8];
+ ///
+ /// More Information about the device and its interconnect.
+ ///
+ UINT16 DeviceTopology;
+ ///
+ /// Relative Target Port (RTP).
+ ///
+ UINT16 RelativeTargetPort;
+} SASEX_DEVICE_PATH;
+
+///
+/// NvmExpress Namespace Device Path SubType.
+///
+#define MSG_NVME_NAMESPACE_DP 0x17
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ UINT32 NamespaceId;
+ UINT64 NamespaceUuid;
+} NVME_NAMESPACE_DEVICE_PATH;
+
+///
+/// DNS Device Path SubType
+///
+#define MSG_DNS_DP 0x1F
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Indicates the DNS server address is IPv4 or IPv6 address.
+ ///
+ UINT8 IsIPv6;
+ ///
+ /// Instance of the DNS server address.
+ ///
+ EFI_IP_ADDRESS DnsServerIp[];
+} DNS_DEVICE_PATH;
+
+///
+/// Uniform Resource Identifiers (URI) Device Path SubType
+///
+#define MSG_URI_DP 0x18
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Instance of the URI pursuant to RFC 3986.
+ ///
+ CHAR8 Uri[];
+} URI_DEVICE_PATH;
+
+///
+/// Universal Flash Storage (UFS) Device Path SubType.
+///
+#define MSG_UFS_DP 0x19
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Target ID on the UFS bus (PUN).
+ ///
+ UINT8 Pun;
+ ///
+ /// Logical Unit Number (LUN).
+ ///
+ UINT8 Lun;
+} UFS_DEVICE_PATH;
+
+///
+/// SD (Secure Digital) Device Path SubType.
+///
+#define MSG_SD_DP 0x1A
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ UINT8 SlotNumber;
+} SD_DEVICE_PATH;
+
+///
+/// EMMC (Embedded MMC) Device Path SubType.
+///
+#define MSG_EMMC_DP 0x1D
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ UINT8 SlotNumber;
+} EMMC_DEVICE_PATH;
+
+///
+/// iSCSI Device Path SubType
+///
+#define MSG_ISCSI_DP 0x13
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Network Protocol (0 = TCP, 1+ = reserved).
+ ///
+ UINT16 NetworkProtocol;
+ ///
+ /// iSCSI Login Options.
+ ///
+ UINT16 LoginOption;
+ ///
+ /// iSCSI Logical Unit Number.
+ ///
+ UINT64 Lun;
+ ///
+ /// iSCSI Target Portal group tag the initiator intends
+ /// to establish a session with.
+ ///
+ UINT16 TargetPortalGroupTag;
+ ///
+ /// iSCSI NodeTarget Name. The length of the name
+ /// is determined by subtracting the offset of this field from Length.
+ ///
+ /// CHAR8 iSCSI Target Name.
+} ISCSI_DEVICE_PATH;
+
+#define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000
+#define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002
+#define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000
+#define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008
+#define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000
+#define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000
+#define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000
+#define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000
+
+///
+/// VLAN Device Path SubType.
+///
+#define MSG_VLAN_DP 0x14
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// VLAN identifier (0-4094).
+ ///
+ UINT16 VlanId;
+} VLAN_DEVICE_PATH;
+
+///
+/// Bluetooth Device Path SubType.
+///
+#define MSG_BLUETOOTH_DP 0x1b
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// 48bit Bluetooth device address.
+ ///
+ BLUETOOTH_ADDRESS BD_ADDR;
+} BLUETOOTH_DEVICE_PATH;
+
+///
+/// Wi-Fi Device Path SubType.
+///
+#define MSG_WIFI_DP 0x1C
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Service set identifier. A 32-byte octets string.
+ ///
+ UINT8 SSId[32];
+} WIFI_DEVICE_PATH;
+
+///
+/// Bluetooth LE Device Path SubType.
+///
+#define MSG_BLUETOOTH_LE_DP 0x1E
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ BLUETOOTH_LE_ADDRESS Address;
+} BLUETOOTH_LE_DEVICE_PATH;
+
+//
+// Media Device Path
+//
+#define MEDIA_DEVICE_PATH 0x04
+
+///
+/// Hard Drive Media Device Path SubType.
+///
+#define MEDIA_HARDDRIVE_DP 0x01
+
+///
+/// The Hard Drive Media Device Path is used to represent a partition on a hard drive.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Describes the entry in a partition table, starting with entry 1.
+ /// Partition number zero represents the entire device. Valid
+ /// partition numbers for a MBR partition are [1, 4]. Valid
+ /// partition numbers for a GPT partition are [1, NumberOfPartitionEntries].
+ ///
+ UINT32 PartitionNumber;
+ ///
+ /// Starting LBA of the partition on the hard drive.
+ ///
+ UINT64 PartitionStart;
+ ///
+ /// Size of the partition in units of Logical Blocks.
+ ///
+ UINT64 PartitionSize;
+ ///
+ /// Signature unique to this partition:
+ /// If SignatureType is 0, this field has to be initialized with 16 zeros.
+ /// If SignatureType is 1, the MBR signature is stored in the first 4 bytes of this field.
+ /// The other 12 bytes are initialized with zeros.
+ /// If SignatureType is 2, this field contains a 16 byte signature.
+ ///
+ UINT8 Signature[16];
+ ///
+ /// Partition Format: (Unused values reserved).
+ /// 0x01 - PC-AT compatible legacy MBR.
+ /// 0x02 - GUID Partition Table.
+ ///
+ UINT8 MBRType;
+ ///
+ /// Type of Disk Signature: (Unused values reserved).
+ /// 0x00 - No Disk Signature.
+ /// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR.
+ /// 0x02 - GUID signature.
+ ///
+ UINT8 SignatureType;
+} HARDDRIVE_DEVICE_PATH;
+
+#define MBR_TYPE_PCAT 0x01
+#define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02
+
+#define NO_DISK_SIGNATURE 0x00
+#define SIGNATURE_TYPE_MBR 0x01
+#define SIGNATURE_TYPE_GUID 0x02
+
+///
+/// CD-ROM Media Device Path SubType.
+///
+#define MEDIA_CDROM_DP 0x02
+
+///
+/// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero.
+ ///
+ UINT32 BootEntry;
+ ///
+ /// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing.
+ ///
+ UINT64 PartitionStart;
+ ///
+ /// Size of the partition in units of Blocks, also called Sectors.
+ ///
+ UINT64 PartitionSize;
+} CDROM_DEVICE_PATH;
+
+//
+// Use VENDOR_DEVICE_PATH struct
+//
+#define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype.
+
+///
+/// File Path Media Device Path SubType
+///
+#define MEDIA_FILEPATH_DP 0x04
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// A NULL-terminated Path string including directory and file names.
+ ///
+ CHAR16 PathName[1];
+} FILEPATH_DEVICE_PATH;
+
+#define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName)
+
+///
+/// Media Protocol Device Path SubType.
+///
+#define MEDIA_PROTOCOL_DP 0x05
+
+///
+/// The Media Protocol Device Path is used to denote the protocol that is being
+/// used in a device path at the location of the path specified.
+/// Many protocols are inherent to the style of device path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// The ID of the protocol.
+ ///
+ EFI_GUID Protocol;
+} MEDIA_PROTOCOL_DEVICE_PATH;
+
+///
+/// PIWG Firmware File SubType.
+///
+#define MEDIA_PIWG_FW_FILE_DP 0x06
+
+///
+/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Firmware file name
+ ///
+ EFI_GUID FvFileName;
+} MEDIA_FW_VOL_FILEPATH_DEVICE_PATH;
+
+///
+/// PIWG Firmware Volume Device Path SubType.
+///
+#define MEDIA_PIWG_FW_VOL_DP 0x07
+
+///
+/// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Firmware volume name.
+ ///
+ EFI_GUID FvName;
+} MEDIA_FW_VOL_DEVICE_PATH;
+
+///
+/// Media relative offset range device path.
+///
+#define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08
+
+///
+/// Used to describe the offset range of media relative.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ UINT32 Reserved;
+ UINT64 StartingOffset;
+ UINT64 EndingOffset;
+} MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH;
+
+///
+/// This GUID defines a RAM Disk supporting a raw disk format in volatile memory.
+///
+#define EFI_VIRTUAL_DISK_GUID \
+ { \
+ 0x77AB535A, 0x45FC, 0x624B, {0x55, 0x60, 0xF7, 0xB2, 0x81, 0xD1, 0xF9, 0x6E } \
+ }
+
+extern EFI_GUID gEfiVirtualDiskGuid;
+
+///
+/// This GUID defines a RAM Disk supporting an ISO image in volatile memory.
+///
+#define EFI_VIRTUAL_CD_GUID \
+ { \
+ 0x3D5ABD30, 0x4175, 0x87CE, {0x6D, 0x64, 0xD2, 0xAD, 0xE5, 0x23, 0xC4, 0xBB } \
+ }
+extern EFI_GUID gEfiVirtualCdGuid;
+
+///
+/// This GUID defines a RAM Disk supporting a raw disk format in persistent memory.
+///
+#define EFI_PERSISTENT_VIRTUAL_DISK_GUID \
+ { \
+ 0x5CEA02C9, 0x4D07, 0x69D3, {0x26, 0x9F ,0x44, 0x96, 0xFB, 0xE0, 0x96, 0xF9 } \
+ }
+
+extern EFI_GUID gEfiPersistentVirtualDiskGuid;
+
+///
+/// This GUID defines a RAM Disk supporting an ISO image in persistent memory.
+///
+#define EFI_PERSISTENT_VIRTUAL_CD_GUID \
+ { \
+ 0x08018188, 0x42CD, 0xBB48, {0x10, 0x0F, 0x53, 0x87, 0xD5, 0x3D, 0xED, 0x3D } \
+ }
+
+extern EFI_GUID gEfiPersistentVirtualCdGuid;
+
+///
+/// Media ram disk device path.
+///
+#define MEDIA_RAM_DISK_DP 0x09
+
+///
+/// Used to describe the ram disk device path.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Starting Memory Address.
+ ///
+ UINT32 StartingAddr[2];
+ ///
+ /// Ending Memory Address.
+ ///
+ UINT32 EndingAddr[2];
+ ///
+ /// GUID that defines the type of the RAM Disk.
+ ///
+ EFI_GUID TypeGuid;
+ ///
+ /// RAM Diskinstance number, if supported. The default value is zero.
+ ///
+ UINT16 Instance;
+} MEDIA_RAM_DISK_DEVICE_PATH;
+
+///
+/// BIOS Boot Specification Device Path.
+///
+#define BBS_DEVICE_PATH 0x05
+
+///
+/// BIOS Boot Specification Device Path SubType.
+///
+#define BBS_BBS_DP 0x01
+
+///
+/// This Device Path is used to describe the booting of non-EFI-aware operating systems.
+///
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ ///
+ /// Device Type as defined by the BIOS Boot Specification.
+ ///
+ UINT16 DeviceType;
+ ///
+ /// Status Flags as defined by the BIOS Boot Specification.
+ ///
+ UINT16 StatusFlag;
+ ///
+ /// Null-terminated ASCII string that describes the boot device to a user.
+ ///
+ CHAR8 String[1];
+} BBS_BBS_DEVICE_PATH;
+
+//
+// DeviceType definitions - from BBS specification
+//
+#define BBS_TYPE_FLOPPY 0x01
+#define BBS_TYPE_HARDDRIVE 0x02
+#define BBS_TYPE_CDROM 0x03
+#define BBS_TYPE_PCMCIA 0x04
+#define BBS_TYPE_USB 0x05
+#define BBS_TYPE_EMBEDDED_NETWORK 0x06
+#define BBS_TYPE_BEV 0x80
+#define BBS_TYPE_UNKNOWN 0xFF
+
+
+///
+/// Union of all possible Device Paths and pointers to Device Paths.
+///
+typedef union {
+ EFI_DEVICE_PATH_PROTOCOL DevPath;
+ PCI_DEVICE_PATH Pci;
+ PCCARD_DEVICE_PATH PcCard;
+ MEMMAP_DEVICE_PATH MemMap;
+ VENDOR_DEVICE_PATH Vendor;
+
+ CONTROLLER_DEVICE_PATH Controller;
+ BMC_DEVICE_PATH Bmc;
+ ACPI_HID_DEVICE_PATH Acpi;
+ ACPI_EXTENDED_HID_DEVICE_PATH ExtendedAcpi;
+ ACPI_ADR_DEVICE_PATH AcpiAdr;
+
+ ATAPI_DEVICE_PATH Atapi;
+ SCSI_DEVICE_PATH Scsi;
+ ISCSI_DEVICE_PATH Iscsi;
+ FIBRECHANNEL_DEVICE_PATH FibreChannel;
+ FIBRECHANNELEX_DEVICE_PATH FibreChannelEx;
+
+ F1394_DEVICE_PATH F1394;
+ USB_DEVICE_PATH Usb;
+ SATA_DEVICE_PATH Sata;
+ USB_CLASS_DEVICE_PATH UsbClass;
+ USB_WWID_DEVICE_PATH UsbWwid;
+ DEVICE_LOGICAL_UNIT_DEVICE_PATH LogicUnit;
+ I2O_DEVICE_PATH I2O;
+ MAC_ADDR_DEVICE_PATH MacAddr;
+ IPv4_DEVICE_PATH Ipv4;
+ IPv6_DEVICE_PATH Ipv6;
+ VLAN_DEVICE_PATH Vlan;
+ INFINIBAND_DEVICE_PATH InfiniBand;
+ UART_DEVICE_PATH Uart;
+ UART_FLOW_CONTROL_DEVICE_PATH UartFlowControl;
+ SAS_DEVICE_PATH Sas;
+ SASEX_DEVICE_PATH SasEx;
+ NVME_NAMESPACE_DEVICE_PATH NvmeNamespace;
+ DNS_DEVICE_PATH Dns;
+ URI_DEVICE_PATH Uri;
+ BLUETOOTH_DEVICE_PATH Bluetooth;
+ WIFI_DEVICE_PATH WiFi;
+ UFS_DEVICE_PATH Ufs;
+ SD_DEVICE_PATH Sd;
+ EMMC_DEVICE_PATH Emmc;
+ HARDDRIVE_DEVICE_PATH HardDrive;
+ CDROM_DEVICE_PATH CD;
+
+ FILEPATH_DEVICE_PATH FilePath;
+ MEDIA_PROTOCOL_DEVICE_PATH MediaProtocol;
+
+ MEDIA_FW_VOL_DEVICE_PATH FirmwareVolume;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FirmwareFile;
+ MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH Offset;
+ MEDIA_RAM_DISK_DEVICE_PATH RamDisk;
+ BBS_BBS_DEVICE_PATH Bbs;
+} EFI_DEV_PATH;
+
+
+
+typedef union {
+ EFI_DEVICE_PATH_PROTOCOL *DevPath;
+ PCI_DEVICE_PATH *Pci;
+ PCCARD_DEVICE_PATH *PcCard;
+ MEMMAP_DEVICE_PATH *MemMap;
+ VENDOR_DEVICE_PATH *Vendor;
+
+ CONTROLLER_DEVICE_PATH *Controller;
+ BMC_DEVICE_PATH *Bmc;
+ ACPI_HID_DEVICE_PATH *Acpi;
+ ACPI_EXTENDED_HID_DEVICE_PATH *ExtendedAcpi;
+ ACPI_ADR_DEVICE_PATH *AcpiAdr;
+
+ ATAPI_DEVICE_PATH *Atapi;
+ SCSI_DEVICE_PATH *Scsi;
+ ISCSI_DEVICE_PATH *Iscsi;
+ FIBRECHANNEL_DEVICE_PATH *FibreChannel;
+ FIBRECHANNELEX_DEVICE_PATH *FibreChannelEx;
+
+ F1394_DEVICE_PATH *F1394;
+ USB_DEVICE_PATH *Usb;
+ SATA_DEVICE_PATH *Sata;
+ USB_CLASS_DEVICE_PATH *UsbClass;
+ USB_WWID_DEVICE_PATH *UsbWwid;
+ DEVICE_LOGICAL_UNIT_DEVICE_PATH *LogicUnit;
+ I2O_DEVICE_PATH *I2O;
+ MAC_ADDR_DEVICE_PATH *MacAddr;
+ IPv4_DEVICE_PATH *Ipv4;
+ IPv6_DEVICE_PATH *Ipv6;
+ VLAN_DEVICE_PATH *Vlan;
+ INFINIBAND_DEVICE_PATH *InfiniBand;
+ UART_DEVICE_PATH *Uart;
+ UART_FLOW_CONTROL_DEVICE_PATH *UartFlowControl;
+ SAS_DEVICE_PATH *Sas;
+ SASEX_DEVICE_PATH *SasEx;
+ NVME_NAMESPACE_DEVICE_PATH *NvmeNamespace;
+ DNS_DEVICE_PATH *Dns;
+ URI_DEVICE_PATH *Uri;
+ BLUETOOTH_DEVICE_PATH *Bluetooth;
+ WIFI_DEVICE_PATH *WiFi;
+ UFS_DEVICE_PATH *Ufs;
+ SD_DEVICE_PATH *Sd;
+ EMMC_DEVICE_PATH *Emmc;
+ HARDDRIVE_DEVICE_PATH *HardDrive;
+ CDROM_DEVICE_PATH *CD;
+
+ FILEPATH_DEVICE_PATH *FilePath;
+ MEDIA_PROTOCOL_DEVICE_PATH *MediaProtocol;
+
+ MEDIA_FW_VOL_DEVICE_PATH *FirmwareVolume;
+ MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FirmwareFile;
+ MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH *Offset;
+ MEDIA_RAM_DISK_DEVICE_PATH *RamDisk;
+ BBS_BBS_DEVICE_PATH *Bbs;
+ UINT8 *Raw;
+} EFI_DEV_PATH_PTR;
+
+#define EFI_DEBUGPORT_PROTOCOL_GUID \
+ { \
+ 0xEBA4E8D2, 0x3858, 0x41EC, {0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 } \
+ }
+//
+// DEBUGPORT variable definitions...
+//
+#define EFI_DEBUGPORT_VARIABLE_NAME L"DEBUGPORT"
+#define EFI_DEBUGPORT_VARIABLE_GUID EFI_DEBUGPORT_PROTOCOL_GUID
+extern EFI_GUID gEfiDebugPortVariableGuid;
+
+//
+// DebugPort device path definitions...
+//
+#define DEVICE_PATH_MESSAGING_DEBUGPORT EFI_DEBUGPORT_PROTOCOL_GUID
+extern EFI_GUID gEfiDebugPortProtocolGuid;
+
+typedef struct {
+ EFI_DEVICE_PATH_PROTOCOL Header;
+ EFI_GUID Guid;
+} DEBUGPORT_DEVICE_PATH;
+
+#pragma pack()
+
+#define END_DEVICE_PATH_TYPE 0x7f
+#define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF
+#define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01
+
+extern EFI_GUID gEfiDevicePathProtocolGuid;
+
+#endif
diff --git a/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h b/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h
index b2fd6b2837..bd6920c61c 100644
--- a/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h
+++ b/BaseTools/Source/C/Include/Protocol/DevicePathUtilities.h
@@ -1,288 +1,288 @@
-/** @file
- EFI_DEVICE_PATH_UTILITIES_PROTOCOL as defined in UEFI 2.0.
- Use to create and manipulate device paths and device nodes.
-
- Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __DEVICE_PATH_UTILITIES_H__
-#define __DEVICE_PATH_UTILITIES_H__
-
-///
-/// Device Path Utilities protocol
-///
-#define EFI_DEVICE_PATH_UTILITIES_GUID \
- { \
- 0x379be4e, 0xd706, 0x437d, {0xb0, 0x37, 0xed, 0xb8, 0x2f, 0xb7, 0x72, 0xa4 } \
- }
-
-/**
- Returns the size of the device path, in bytes.
-
- @param DevicePath Points to the start of the EFI device path.
-
- @return Size Size of the specified device path, in bytes, including the end-of-path tag.
- @retval 0 DevicePath is NULL
-
-**/
-typedef
-UINTN
-( *EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE)(
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-
-/**
- Create a duplicate of the specified path.
-
- @param DevicePath Points to the source EFI device path.
-
- @retval Pointer A pointer to the duplicate device path.
- @retval NULL insufficient memory or DevicePath is NULL
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH)(
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Create a new path by appending the second device path to the first.
- If Src1 is NULL and Src2 is non-NULL, then a duplicate of Src2 is returned.
- If Src1 is non-NULL and Src2 is NULL, then a duplicate of Src1 is returned.
- If Src1 and Src2 are both NULL, then a copy of an end-of-device-path is returned.
-
- @param Src1 Points to the first device path.
- @param Src2 Points to the second device path.
-
- @retval Pointer A pointer to the newly created device path.
- @retval NULL Memory could not be allocated
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_APPEND_PATH)(
- CONST EFI_DEVICE_PATH_PROTOCOL *Src1,
- CONST EFI_DEVICE_PATH_PROTOCOL *Src2
- );
-
-/**
- Creates a new path by appending the device node to the device path.
- If DeviceNode is NULL then a copy of DevicePath is returned.
- If DevicePath is NULL then a copy of DeviceNode, followed by an end-of-device path device node is returned.
- If both DeviceNode and DevicePath are NULL then a copy of an end-of-device-path device node is returned.
-
- @param DevicePath Points to the device path.
- @param DeviceNode Points to the device node.
-
- @retval Pointer A pointer to the allocated device node.
- @retval NULL There was insufficient memory.
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_APPEND_NODE)(
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- CONST EFI_DEVICE_PATH_PROTOCOL *DeviceNode
- );
-
-/**
- Creates a new path by appending the specified device path instance to the specified device path.
-
- @param DevicePath Points to the device path. If NULL, then ignored.
- @param DevicePathInstance Points to the device path instance.
-
- @retval Pointer A pointer to the newly created device path
- @retval NULL Memory could not be allocated or DevicePathInstance is NULL.
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE)(
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance
- );
-
-/**
- Creates a copy of the current device path instance and returns a pointer to the next device path
- instance.
-
- @param DevicePathInstance On input, this holds the pointer to the current device path
- instance. On output, this holds the pointer to the next
- device path instance or NULL if there are no more device
- path instances in the device path.
- @param DevicePathInstanceSize On output, this holds the size of the device path instance,
- in bytes or zero, if DevicePathInstance is NULL.
- If NULL, then the instance size is not output.
-
- @retval Pointer A pointer to the copy of the current device path instance.
- @retval NULL DevicePathInstance was NULL on entry or there was insufficient memory.
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE)(
- EFI_DEVICE_PATH_PROTOCOL **DevicePathInstance,
- UINTN *DevicePathInstanceSize
- );
-
-/**
- Creates a device node
-
- @param NodeType NodeType is the device node type (EFI_DEVICE_PATH.Type) for
- the new device node.
- @param NodeSubType NodeSubType is the device node sub-type
- EFI_DEVICE_PATH.SubType) for the new device node.
- @param NodeLength NodeLength is the length of the device node
- (EFI_DEVICE_PATH.Length) for the new device node.
-
- @retval Pointer A pointer to the newly created device node.
- @retval NULL NodeLength is less than
- the size of the header or there was insufficient memory.
-
-**/
-typedef
-EFI_DEVICE_PATH_PROTOCOL*
-( *EFI_DEVICE_PATH_UTILS_CREATE_NODE)(
- UINT8 NodeType,
- UINT8 NodeSubType,
- UINT16 NodeLength
-);
-
-/**
- Returns whether a device path is multi-instance.
-
- @param DevicePath Points to the device path. If NULL, then ignored.
-
- @retval TRUE The device path has more than one instance
- @retval FALSE The device path is empty or contains only a single instance.
-
-**/
-typedef
-BOOLEAN
-( *EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE)(
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-///
-/// This protocol is used to creates and manipulates device paths and device nodes.
-///
-typedef struct {
- EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE GetDevicePathSize;
- EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH DuplicateDevicePath;
- EFI_DEVICE_PATH_UTILS_APPEND_PATH AppendDevicePath;
- EFI_DEVICE_PATH_UTILS_APPEND_NODE AppendDeviceNode;
- EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE AppendDevicePathInstance;
- EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE GetNextDevicePathInstance;
- EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE IsDevicePathMultiInstance;
- EFI_DEVICE_PATH_UTILS_CREATE_NODE CreateDeviceNode;
-} EFI_DEVICE_PATH_UTILITIES_PROTOCOL;
-
-extern EFI_GUID gEfiDevicePathUtilitiesProtocolGuid;
-
-VOID
-SetDevicePathEndNode (
- VOID *Node
- );
-
-BOOLEAN
-IsDevicePathValid (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- UINTN MaxSize
- );
-
-UINT8
-DevicePathType (
- CONST VOID *Node
- );
-
-UINT8
-DevicePathSubType (
- CONST VOID *Node
- );
-
-UINTN
-DevicePathNodeLength (
- CONST VOID *Node
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-NextDevicePathNode (
- CONST VOID *Node
- );
-
-BOOLEAN
-IsDevicePathEndType (
- CONST VOID *Node
- );
-
-BOOLEAN
-IsDevicePathEnd (
- CONST VOID *Node
- );
-BOOLEAN
-IsDevicePathEndInstance (
- CONST VOID *Node
- );
-
-UINT16
-SetDevicePathNodeLength (
- VOID *Node,
- UINTN Length
- );
-
-VOID
-SetDevicePathEndNode (
- VOID *Node
- );
-
-UINTN
-UefiDevicePathLibGetDevicePathSize (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibDuplicateDevicePath (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibAppendDevicePath (
- CONST EFI_DEVICE_PATH_PROTOCOL *FirstDevicePath,
- CONST EFI_DEVICE_PATH_PROTOCOL *SecondDevicePath
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibAppendDevicePathNode (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathNode
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibAppendDevicePathInstance (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibGetNextDevicePathInstance (
- EFI_DEVICE_PATH_PROTOCOL **DevicePath,
- UINTN *Size
- );
-
-EFI_DEVICE_PATH_PROTOCOL *
-UefiDevicePathLibCreateDeviceNode (
- UINT8 NodeType,
- UINT8 NodeSubType,
- UINT16 NodeLength
- );
-
-BOOLEAN
-UefiDevicePathLibIsDevicePathMultiInstance (
- CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-#endif
+/** @file
+ EFI_DEVICE_PATH_UTILITIES_PROTOCOL as defined in UEFI 2.0.
+ Use to create and manipulate device paths and device nodes.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __DEVICE_PATH_UTILITIES_H__
+#define __DEVICE_PATH_UTILITIES_H__
+
+///
+/// Device Path Utilities protocol
+///
+#define EFI_DEVICE_PATH_UTILITIES_GUID \
+ { \
+ 0x379be4e, 0xd706, 0x437d, {0xb0, 0x37, 0xed, 0xb8, 0x2f, 0xb7, 0x72, 0xa4 } \
+ }
+
+/**
+ Returns the size of the device path, in bytes.
+
+ @param DevicePath Points to the start of the EFI device path.
+
+ @return Size Size of the specified device path, in bytes, including the end-of-path tag.
+ @retval 0 DevicePath is NULL
+
+**/
+typedef
+UINTN
+( *EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+
+/**
+ Create a duplicate of the specified path.
+
+ @param DevicePath Points to the source EFI device path.
+
+ @retval Pointer A pointer to the duplicate device path.
+ @retval NULL insufficient memory or DevicePath is NULL
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+/**
+ Create a new path by appending the second device path to the first.
+ If Src1 is NULL and Src2 is non-NULL, then a duplicate of Src2 is returned.
+ If Src1 is non-NULL and Src2 is NULL, then a duplicate of Src1 is returned.
+ If Src1 and Src2 are both NULL, then a copy of an end-of-device-path is returned.
+
+ @param Src1 Points to the first device path.
+ @param Src2 Points to the second device path.
+
+ @retval Pointer A pointer to the newly created device path.
+ @retval NULL Memory could not be allocated
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_APPEND_PATH)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *Src1,
+ CONST EFI_DEVICE_PATH_PROTOCOL *Src2
+ );
+
+/**
+ Creates a new path by appending the device node to the device path.
+ If DeviceNode is NULL then a copy of DevicePath is returned.
+ If DevicePath is NULL then a copy of DeviceNode, followed by an end-of-device path device node is returned.
+ If both DeviceNode and DevicePath are NULL then a copy of an end-of-device-path device node is returned.
+
+ @param DevicePath Points to the device path.
+ @param DeviceNode Points to the device node.
+
+ @retval Pointer A pointer to the allocated device node.
+ @retval NULL There was insufficient memory.
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_APPEND_NODE)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ CONST EFI_DEVICE_PATH_PROTOCOL *DeviceNode
+ );
+
+/**
+ Creates a new path by appending the specified device path instance to the specified device path.
+
+ @param DevicePath Points to the device path. If NULL, then ignored.
+ @param DevicePathInstance Points to the device path instance.
+
+ @retval Pointer A pointer to the newly created device path
+ @retval NULL Memory could not be allocated or DevicePathInstance is NULL.
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance
+ );
+
+/**
+ Creates a copy of the current device path instance and returns a pointer to the next device path
+ instance.
+
+ @param DevicePathInstance On input, this holds the pointer to the current device path
+ instance. On output, this holds the pointer to the next
+ device path instance or NULL if there are no more device
+ path instances in the device path.
+ @param DevicePathInstanceSize On output, this holds the size of the device path instance,
+ in bytes or zero, if DevicePathInstance is NULL.
+ If NULL, then the instance size is not output.
+
+ @retval Pointer A pointer to the copy of the current device path instance.
+ @retval NULL DevicePathInstance was NULL on entry or there was insufficient memory.
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE)(
+ EFI_DEVICE_PATH_PROTOCOL **DevicePathInstance,
+ UINTN *DevicePathInstanceSize
+ );
+
+/**
+ Creates a device node
+
+ @param NodeType NodeType is the device node type (EFI_DEVICE_PATH.Type) for
+ the new device node.
+ @param NodeSubType NodeSubType is the device node sub-type
+ EFI_DEVICE_PATH.SubType) for the new device node.
+ @param NodeLength NodeLength is the length of the device node
+ (EFI_DEVICE_PATH.Length) for the new device node.
+
+ @retval Pointer A pointer to the newly created device node.
+ @retval NULL NodeLength is less than
+ the size of the header or there was insufficient memory.
+
+**/
+typedef
+EFI_DEVICE_PATH_PROTOCOL*
+( *EFI_DEVICE_PATH_UTILS_CREATE_NODE)(
+ UINT8 NodeType,
+ UINT8 NodeSubType,
+ UINT16 NodeLength
+);
+
+/**
+ Returns whether a device path is multi-instance.
+
+ @param DevicePath Points to the device path. If NULL, then ignored.
+
+ @retval TRUE The device path has more than one instance
+ @retval FALSE The device path is empty or contains only a single instance.
+
+**/
+typedef
+BOOLEAN
+( *EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE)(
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+///
+/// This protocol is used to creates and manipulates device paths and device nodes.
+///
+typedef struct {
+ EFI_DEVICE_PATH_UTILS_GET_DEVICE_PATH_SIZE GetDevicePathSize;
+ EFI_DEVICE_PATH_UTILS_DUP_DEVICE_PATH DuplicateDevicePath;
+ EFI_DEVICE_PATH_UTILS_APPEND_PATH AppendDevicePath;
+ EFI_DEVICE_PATH_UTILS_APPEND_NODE AppendDeviceNode;
+ EFI_DEVICE_PATH_UTILS_APPEND_INSTANCE AppendDevicePathInstance;
+ EFI_DEVICE_PATH_UTILS_GET_NEXT_INSTANCE GetNextDevicePathInstance;
+ EFI_DEVICE_PATH_UTILS_IS_MULTI_INSTANCE IsDevicePathMultiInstance;
+ EFI_DEVICE_PATH_UTILS_CREATE_NODE CreateDeviceNode;
+} EFI_DEVICE_PATH_UTILITIES_PROTOCOL;
+
+extern EFI_GUID gEfiDevicePathUtilitiesProtocolGuid;
+
+VOID
+SetDevicePathEndNode (
+ VOID *Node
+ );
+
+BOOLEAN
+IsDevicePathValid (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ UINTN MaxSize
+ );
+
+UINT8
+DevicePathType (
+ CONST VOID *Node
+ );
+
+UINT8
+DevicePathSubType (
+ CONST VOID *Node
+ );
+
+UINTN
+DevicePathNodeLength (
+ CONST VOID *Node
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+NextDevicePathNode (
+ CONST VOID *Node
+ );
+
+BOOLEAN
+IsDevicePathEndType (
+ CONST VOID *Node
+ );
+
+BOOLEAN
+IsDevicePathEnd (
+ CONST VOID *Node
+ );
+BOOLEAN
+IsDevicePathEndInstance (
+ CONST VOID *Node
+ );
+
+UINT16
+SetDevicePathNodeLength (
+ VOID *Node,
+ UINTN Length
+ );
+
+VOID
+SetDevicePathEndNode (
+ VOID *Node
+ );
+
+UINTN
+UefiDevicePathLibGetDevicePathSize (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibDuplicateDevicePath (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibAppendDevicePath (
+ CONST EFI_DEVICE_PATH_PROTOCOL *FirstDevicePath,
+ CONST EFI_DEVICE_PATH_PROTOCOL *SecondDevicePath
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibAppendDevicePathNode (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathNode
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibAppendDevicePathInstance (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePathInstance
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibGetNextDevicePathInstance (
+ EFI_DEVICE_PATH_PROTOCOL **DevicePath,
+ UINTN *Size
+ );
+
+EFI_DEVICE_PATH_PROTOCOL *
+UefiDevicePathLibCreateDeviceNode (
+ UINT8 NodeType,
+ UINT8 NodeSubType,
+ UINT16 NodeLength
+ );
+
+BOOLEAN
+UefiDevicePathLibIsDevicePathMultiInstance (
+ CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath
+ );
+
+#endif
diff --git a/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h b/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h
index 5a10ac72a4..d075365c38 100644
--- a/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h
+++ b/BaseTools/Source/C/Include/Protocol/GraphicsOutput.h
@@ -1,187 +1,187 @@
-/** @file
- Graphics Output Protocol from the UEFI 2.0 specification.
-
- Abstraction of a very simple graphics device.
-
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __GRAPHICS_OUTPUT_H__
-#define __GRAPHICS_OUTPUT_H__
-
-#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \
- { \
- 0x9042a9de, 0x23dc, 0x4a38, {0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a } \
- }
-
-typedef struct _EFI_GRAPHICS_OUTPUT_PROTOCOL EFI_GRAPHICS_OUTPUT_PROTOCOL;
-
-typedef struct {
- UINT32 RedMask;
- UINT32 GreenMask;
- UINT32 BlueMask;
- UINT32 ReservedMask;
-} EFI_PIXEL_BITMASK;
-
-typedef enum {
- PixelRedGreenBlueReserved8BitPerColor,
- PixelBlueGreenRedReserved8BitPerColor,
- PixelBitMask,
- PixelBltOnly,
- PixelFormatMax
-} EFI_GRAPHICS_PIXEL_FORMAT;
-
-typedef struct {
- UINT32 Version;
- UINT32 HorizontalResolution;
- UINT32 VerticalResolution;
- EFI_GRAPHICS_PIXEL_FORMAT PixelFormat;
- EFI_PIXEL_BITMASK PixelInformation;
- UINT32 PixelsPerScanLine;
-} EFI_GRAPHICS_OUTPUT_MODE_INFORMATION;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param ModeNumber The mode number to return information on.
- @param SizeOfInfo A pointer to the size, in bytes, of the Info buffer.
- @param Info A pointer to callee allocated buffer that returns information about ModeNumber.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_BUFFER_TOO_SMALL The Info buffer was too small.
- @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the video mode.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
- @retval EFI_INVALID_PARAMETER One of the input args was NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE) (
- IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
- IN UINT32 ModeNumber,
- OUT UINTN *SizeOfInfo,
- OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
- )
-;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param ModeNumber The mode number to be set.
-
- @retval EFI_SUCCESS Graphics mode was changed.
- @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
- @retval EFI_UNSUPPORTED ModeNumber is not supported by this device.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE) (
- IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
- IN UINT32 ModeNumber
- )
-;
-
-typedef struct {
- UINT8 Blue;
- UINT8 Green;
- UINT8 Red;
- UINT8 Reserved;
-} EFI_GRAPHICS_OUTPUT_BLT_PIXEL;
-
-typedef union {
- EFI_GRAPHICS_OUTPUT_BLT_PIXEL Pixel;
- UINT32 Raw;
-} EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION;
-
-typedef enum {
- EfiBltVideoFill,
- EfiBltVideoToBltBuffer,
- EfiBltBufferToVideo,
- EfiBltVideoToVideo,
- EfiGraphicsOutputBltOperationMax
-} EFI_GRAPHICS_OUTPUT_BLT_OPERATION;
-
-/**
- The following table defines actions for BltOperations:
-
- <B>EfiBltVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
- directly to every pixel of the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- Only one pixel will be used from the BltBuffer. Delta is NOT used.
-
- <B>EfiBltVideoToBltBuffer</B> - Read data from the video display rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
- the BltBuffer rectangle (DestinationX, DestinationY )
- (DestinationX + Width, DestinationY + Height). If DestinationX or
- DestinationY is not zero then Delta must be set to the length in bytes
- of a row in the BltBuffer.
-
- <B>EfiBltBufferToVideo</B> - Write data from the BltBuffer rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
- video display rectangle (DestinationX, DestinationY)
- (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
- not zero then Delta must be set to the length in bytes of a row in the
- BltBuffer.
-
- <B>EfiBltVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
- (SourceX + Width, SourceY + Height) .to the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- The BltBuffer and Delta are not used in this mode.
-
- @param This Protocol instance pointer.
- @param BltBuffer Buffer containing data to blit into video buffer. This
- buffer has a size of Width*Height*sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
- @param BltOperation Operation to perform on BlitBuffer and video memory
- @param SourceX X coordinate of source for the BltBuffer.
- @param SourceY Y coordinate of source for the BltBuffer.
- @param DestinationX X coordinate of destination for the BltBuffer.
- @param DestinationY Y coordinate of destination for the BltBuffer.
- @param Width Width of rectangle in BltBuffer in pixels.
- @param Height Height of rectangle in BltBuffer in pixels.
- @param Delta OPTIONAL
-
- @retval EFI_SUCCESS The Blt operation completed.
- @retval EFI_INVALID_PARAMETER BltOperation is not valid.
- @retval EFI_DEVICE_ERROR A hardware error occurred writing to the video buffer.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT) (
- IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
- IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
- IN UINTN SourceX,
- IN UINTN SourceY,
- IN UINTN DestinationX,
- IN UINTN DestinationY,
- IN UINTN Width,
- IN UINTN Height,
- IN UINTN Delta OPTIONAL
- );
-
-typedef struct {
- UINT32 MaxMode;
- UINT32 Mode;
- EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
- UINTN SizeOfInfo;
- EFI_PHYSICAL_ADDRESS FrameBufferBase;
- UINTN FrameBufferSize;
-} EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE;
-
-struct _EFI_GRAPHICS_OUTPUT_PROTOCOL {
- EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE QueryMode;
- EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE SetMode;
- EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT Blt;
- EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode;
-};
-
-extern EFI_GUID gEfiGraphicsOutputProtocolGuid;
-
-#endif
+/** @file
+ Graphics Output Protocol from the UEFI 2.0 specification.
+
+ Abstraction of a very simple graphics device.
+
+ Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __GRAPHICS_OUTPUT_H__
+#define __GRAPHICS_OUTPUT_H__
+
+#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \
+ { \
+ 0x9042a9de, 0x23dc, 0x4a38, {0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a } \
+ }
+
+typedef struct _EFI_GRAPHICS_OUTPUT_PROTOCOL EFI_GRAPHICS_OUTPUT_PROTOCOL;
+
+typedef struct {
+ UINT32 RedMask;
+ UINT32 GreenMask;
+ UINT32 BlueMask;
+ UINT32 ReservedMask;
+} EFI_PIXEL_BITMASK;
+
+typedef enum {
+ PixelRedGreenBlueReserved8BitPerColor,
+ PixelBlueGreenRedReserved8BitPerColor,
+ PixelBitMask,
+ PixelBltOnly,
+ PixelFormatMax
+} EFI_GRAPHICS_PIXEL_FORMAT;
+
+typedef struct {
+ UINT32 Version;
+ UINT32 HorizontalResolution;
+ UINT32 VerticalResolution;
+ EFI_GRAPHICS_PIXEL_FORMAT PixelFormat;
+ EFI_PIXEL_BITMASK PixelInformation;
+ UINT32 PixelsPerScanLine;
+} EFI_GRAPHICS_OUTPUT_MODE_INFORMATION;
+
+/**
+ Return the current video mode information.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The mode number to return information on.
+ @param SizeOfInfo A pointer to the size, in bytes, of the Info buffer.
+ @param Info A pointer to callee allocated buffer that returns information about ModeNumber.
+
+ @retval EFI_SUCCESS Mode information returned.
+ @retval EFI_BUFFER_TOO_SMALL The Info buffer was too small.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the video mode.
+ @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
+ @retval EFI_INVALID_PARAMETER One of the input args was NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE) (
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber,
+ OUT UINTN *SizeOfInfo,
+ OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION **Info
+ )
+;
+
+/**
+ Return the current video mode information.
+
+ @param This Protocol instance pointer.
+ @param ModeNumber The mode number to be set.
+
+ @retval EFI_SUCCESS Graphics mode was changed.
+ @retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
+ @retval EFI_UNSUPPORTED ModeNumber is not supported by this device.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE) (
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN UINT32 ModeNumber
+ )
+;
+
+typedef struct {
+ UINT8 Blue;
+ UINT8 Green;
+ UINT8 Red;
+ UINT8 Reserved;
+} EFI_GRAPHICS_OUTPUT_BLT_PIXEL;
+
+typedef union {
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL Pixel;
+ UINT32 Raw;
+} EFI_GRAPHICS_OUTPUT_BLT_PIXEL_UNION;
+
+typedef enum {
+ EfiBltVideoFill,
+ EfiBltVideoToBltBuffer,
+ EfiBltBufferToVideo,
+ EfiBltVideoToVideo,
+ EfiGraphicsOutputBltOperationMax
+} EFI_GRAPHICS_OUTPUT_BLT_OPERATION;
+
+/**
+ The following table defines actions for BltOperations:
+
+ <B>EfiBltVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
+ directly to every pixel of the video display rectangle
+ (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ Only one pixel will be used from the BltBuffer. Delta is NOT used.
+
+ <B>EfiBltVideoToBltBuffer</B> - Read data from the video display rectangle
+ (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
+ the BltBuffer rectangle (DestinationX, DestinationY )
+ (DestinationX + Width, DestinationY + Height). If DestinationX or
+ DestinationY is not zero then Delta must be set to the length in bytes
+ of a row in the BltBuffer.
+
+ <B>EfiBltBufferToVideo</B> - Write data from the BltBuffer rectangle
+ (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
+ video display rectangle (DestinationX, DestinationY)
+ (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
+ not zero then Delta must be set to the length in bytes of a row in the
+ BltBuffer.
+
+ <B>EfiBltVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
+ (SourceX + Width, SourceY + Height) .to the video display rectangle
+ (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ The BltBuffer and Delta are not used in this mode.
+
+ @param This Protocol instance pointer.
+ @param BltBuffer Buffer containing data to blit into video buffer. This
+ buffer has a size of Width*Height*sizeof(EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+ @param BltOperation Operation to perform on BlitBuffer and video memory
+ @param SourceX X coordinate of source for the BltBuffer.
+ @param SourceY Y coordinate of source for the BltBuffer.
+ @param DestinationX X coordinate of destination for the BltBuffer.
+ @param DestinationY Y coordinate of destination for the BltBuffer.
+ @param Width Width of rectangle in BltBuffer in pixels.
+ @param Height Height of rectangle in BltBuffer in pixels.
+ @param Delta OPTIONAL
+
+ @retval EFI_SUCCESS The Blt operation completed.
+ @retval EFI_INVALID_PARAMETER BltOperation is not valid.
+ @retval EFI_DEVICE_ERROR A hardware error occurred writing to the video buffer.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT) (
+ IN EFI_GRAPHICS_OUTPUT_PROTOCOL *This,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL
+ IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation,
+ IN UINTN SourceX,
+ IN UINTN SourceY,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN UINTN Delta OPTIONAL
+ );
+
+typedef struct {
+ UINT32 MaxMode;
+ UINT32 Mode;
+ EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *Info;
+ UINTN SizeOfInfo;
+ EFI_PHYSICAL_ADDRESS FrameBufferBase;
+ UINTN FrameBufferSize;
+} EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE;
+
+struct _EFI_GRAPHICS_OUTPUT_PROTOCOL {
+ EFI_GRAPHICS_OUTPUT_PROTOCOL_QUERY_MODE QueryMode;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL_SET_MODE SetMode;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL_BLT Blt;
+ EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *Mode;
+};
+
+extern EFI_GUID gEfiGraphicsOutputProtocolGuid;
+
+#endif
diff --git a/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h b/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h
index f629546252..6dfe1db3f9 100644
--- a/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h
+++ b/BaseTools/Source/C/Include/Protocol/GuidedSectionExtraction.h
@@ -1,145 +1,145 @@
-/** @file
- This file declares GUIDed section extraction protocol.
-
- This interface provides a means of decoding a GUID defined encapsulation
- section. There may be multiple different GUIDs associated with the GUIDed
- section extraction protocol. That is, all instances of the GUIDed section
- extraction protocol must have the same interface structure.
-
- @par Revision Reference: PI
- Version 1.00.
-
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
-#define __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
-
-//
-// Forward reference for pure ANSI compatibility
-
-typedef struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL;
-
-
-/**
- The ExtractSection() function processes the input section and
- allocates a buffer from the pool in which it returns the section
- contents. If the section being extracted contains
- authentication information (the section's
- GuidedSectionHeader.Attributes field has the
- EFI_GUIDED_SECTION_AUTH_STATUS_VALID bit set), the values
- returned in AuthenticationStatus must reflect the results of
- the authentication operation. Depending on the algorithm and
- size of the encapsulated data, the time that is required to do
- a full authentication may be prohibitively long for some
- classes of systems. To indicate this, use
- EFI_SECURITY_POLICY_PROTOCOL_GUID, which may be published by
- the security policy driver (see the Platform Initialization
- Driver Execution Environment Core Interface Specification for
- more details and the GUID definition). If the
- EFI_SECURITY_POLICY_PROTOCOL_GUID exists in the handle
- database, then, if possible, full authentication should be
- skipped and the section contents simply returned in the
- OutputBuffer. In this case, the
- EFI_AUTH_STATUS_PLATFORM_OVERRIDE bit AuthenticationStatus
- must be set on return. ExtractSection() is callable only from
- TPL_NOTIFY and below. Behavior of ExtractSection() at any
- EFI_TPL above TPL_NOTIFY is undefined. Type EFI_TPL is
- defined in RaiseTPL() in the UEFI 2.0 specification.
-
-
- @param This Indicates the
- EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance.
-
- @param InputSection Buffer containing the input GUIDed section
- to be processed. OutputBuffer OutputBuffer
- is allocated from boot services pool
- memory and contains the new section
- stream. The caller is responsible for
- freeing this buffer.
-
- @param OutputSize A pointer to a caller-allocated UINTN in
- which the size of OutputBuffer allocation
- is stored. If the function returns
- anything other than EFI_SUCCESS, the value
- of OutputSize is undefined.
-
- @param AuthenticationStatus A pointer to a caller-allocated
- UINT32 that indicates the
- authentication status of the
- output buffer. If the input
- section's
- GuidedSectionHeader.Attributes
- field has the
- EFI_GUIDED_SECTION_AUTH_STATUS_VAL
- bit as clear, AuthenticationStatus
- must return zero. Both local bits
- (19:16) and aggregate bits (3:0)
- in AuthenticationStatus are
- returned by ExtractSection().
- These bits reflect the status of
- the extraction operation. The bit
- pattern in both regions must be
- the same, as the local and
- aggregate authentication statuses
- have equivalent meaning at this
- level. If the function returns
- anything other than EFI_SUCCESS,
- the value of AuthenticationStatus
- is undefined.
-
-
- @retval EFI_SUCCESS The InputSection was successfully
- processed and the section contents were
- returned.
-
- @retval EFI_OUT_OF_RESOURCES The system has insufficient
- resources to process the
- request.
-
- @retval EFI_INVALID_PARAMETER The GUID in InputSection does
- not match this instance of the
- GUIDed Section Extraction
- Protocol.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_EXTRACT_GUIDED_SECTION)(
- IN CONST EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL *This,
- IN CONST VOID *InputSection,
- OUT VOID **OutputBuffer,
- OUT UINTN *OutputSize,
- OUT UINT32 *AuthenticationStatus
-);
-
-
-/**
-
- Takes the GUIDed section as input and produces the section
- stream data. See the ExtractSection() function description.
-
-**/
-struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL {
- EFI_EXTRACT_GUIDED_SECTION ExtractSection;
-};
-
-//
-// Protocol GUID definition. Each GUIDed section extraction protocol has the
-// same interface but with different GUID. All the GUIDs is defined here.
-// May add multiple GUIDs here.
-//
-#define EFI_CRC32_GUIDED_SECTION_EXTRACTION_PROTOCOL_GUID \
- { \
- 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } \
- }
-
-//
-// may add other GUID here
-//
-extern EFI_GUID gEfiCrc32GuidedSectionExtractionProtocolGuid;
-
-#endif
+/** @file
+ This file declares GUIDed section extraction protocol.
+
+ This interface provides a means of decoding a GUID defined encapsulation
+ section. There may be multiple different GUIDs associated with the GUIDed
+ section extraction protocol. That is, all instances of the GUIDed section
+ extraction protocol must have the same interface structure.
+
+ @par Revision Reference: PI
+ Version 1.00.
+
+ Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
+#define __EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL_H__
+
+//
+// Forward reference for pure ANSI compatibility
+
+typedef struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL;
+
+
+/**
+ The ExtractSection() function processes the input section and
+ allocates a buffer from the pool in which it returns the section
+ contents. If the section being extracted contains
+ authentication information (the section's
+ GuidedSectionHeader.Attributes field has the
+ EFI_GUIDED_SECTION_AUTH_STATUS_VALID bit set), the values
+ returned in AuthenticationStatus must reflect the results of
+ the authentication operation. Depending on the algorithm and
+ size of the encapsulated data, the time that is required to do
+ a full authentication may be prohibitively long for some
+ classes of systems. To indicate this, use
+ EFI_SECURITY_POLICY_PROTOCOL_GUID, which may be published by
+ the security policy driver (see the Platform Initialization
+ Driver Execution Environment Core Interface Specification for
+ more details and the GUID definition). If the
+ EFI_SECURITY_POLICY_PROTOCOL_GUID exists in the handle
+ database, then, if possible, full authentication should be
+ skipped and the section contents simply returned in the
+ OutputBuffer. In this case, the
+ EFI_AUTH_STATUS_PLATFORM_OVERRIDE bit AuthenticationStatus
+ must be set on return. ExtractSection() is callable only from
+ TPL_NOTIFY and below. Behavior of ExtractSection() at any
+ EFI_TPL above TPL_NOTIFY is undefined. Type EFI_TPL is
+ defined in RaiseTPL() in the UEFI 2.0 specification.
+
+
+ @param This Indicates the
+ EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL instance.
+
+ @param InputSection Buffer containing the input GUIDed section
+ to be processed. OutputBuffer OutputBuffer
+ is allocated from boot services pool
+ memory and contains the new section
+ stream. The caller is responsible for
+ freeing this buffer.
+
+ @param OutputSize A pointer to a caller-allocated UINTN in
+ which the size of OutputBuffer allocation
+ is stored. If the function returns
+ anything other than EFI_SUCCESS, the value
+ of OutputSize is undefined.
+
+ @param AuthenticationStatus A pointer to a caller-allocated
+ UINT32 that indicates the
+ authentication status of the
+ output buffer. If the input
+ section's
+ GuidedSectionHeader.Attributes
+ field has the
+ EFI_GUIDED_SECTION_AUTH_STATUS_VAL
+ bit as clear, AuthenticationStatus
+ must return zero. Both local bits
+ (19:16) and aggregate bits (3:0)
+ in AuthenticationStatus are
+ returned by ExtractSection().
+ These bits reflect the status of
+ the extraction operation. The bit
+ pattern in both regions must be
+ the same, as the local and
+ aggregate authentication statuses
+ have equivalent meaning at this
+ level. If the function returns
+ anything other than EFI_SUCCESS,
+ the value of AuthenticationStatus
+ is undefined.
+
+
+ @retval EFI_SUCCESS The InputSection was successfully
+ processed and the section contents were
+ returned.
+
+ @retval EFI_OUT_OF_RESOURCES The system has insufficient
+ resources to process the
+ request.
+
+ @retval EFI_INVALID_PARAMETER The GUID in InputSection does
+ not match this instance of the
+ GUIDed Section Extraction
+ Protocol.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_EXTRACT_GUIDED_SECTION)(
+ IN CONST EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL *This,
+ IN CONST VOID *InputSection,
+ OUT VOID **OutputBuffer,
+ OUT UINTN *OutputSize,
+ OUT UINT32 *AuthenticationStatus
+);
+
+
+/**
+
+ Takes the GUIDed section as input and produces the section
+ stream data. See the ExtractSection() function description.
+
+**/
+struct _EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL {
+ EFI_EXTRACT_GUIDED_SECTION ExtractSection;
+};
+
+//
+// Protocol GUID definition. Each GUIDed section extraction protocol has the
+// same interface but with different GUID. All the GUIDs is defined here.
+// May add multiple GUIDs here.
+//
+#define EFI_CRC32_GUIDED_SECTION_EXTRACTION_PROTOCOL_GUID \
+ { \
+ 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } \
+ }
+
+//
+// may add other GUID here
+//
+extern EFI_GUID gEfiCrc32GuidedSectionExtractionProtocolGuid;
+
+#endif
diff --git a/BaseTools/Source/C/Include/Protocol/HiiFramework.h b/BaseTools/Source/C/Include/Protocol/HiiFramework.h
index 448350967b..5cf78739c6 100644
--- a/BaseTools/Source/C/Include/Protocol/HiiFramework.h
+++ b/BaseTools/Source/C/Include/Protocol/HiiFramework.h
@@ -1,944 +1,944 @@
-/** @file
- This file defines the Human Interface Infrastructure protocol which will
- be used by resources which want to publish IFR/Font/String data and have it
- collected by the Configuration engine.
-
- @par Revision Reference:
- This protocol is defined in HII spec 0.92.
-
- Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef _FRAMEWORK_HII_H_
-#define _FRAMEWORK_HII_H_
-
-//#include <PiDxe.h>
-
-//
-// To get EFI_GRAPHICS_OUTPUT_BLT_PIXEL,
-// is defined in MdePkg/Protocol/GraphicsOutput.h
-//
-#include <Protocol/GraphicsOutput.h>
-
-#define EFI_HII_PROTOCOL_GUID \
- { \
- 0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \
- }
-
-// BugBug:
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-// If UGA goes away we need to put this some place. I'm not sure where?
-//
-//typedef struct {
-// UINT8 Blue;
-// UINT8 Green;
-// UINT8 Red;
-// UINT8 Reserved;
-//} EFI_UGA_PIXEL;
-
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-//
-
-typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;
-
-//
-// Global definition
-//
-#define NARROW_CHAR 0xFFF0
-#define WIDE_CHAR 0xFFF1
-#define NON_BREAKING_CHAR 0xFFF2
-#define GLYPH_WIDTH 8
-#define GLYPH_HEIGHT 19
-
-#define EFI_HII_FONT 1
-#define EFI_HII_STRING 2
-#define EFI_HII_IFR 3
-#define EFI_HII_KEYBOARD 4
-#define EFI_HII_HANDLES 5
-#define EFI_HII_VARIABLE 6
-#define EFI_HII_DEVICE_PATH 7
-
-
-// References to string tokens must use this macro to enable scanning for
-// token usages.
-//
-#define STRING_TOKEN(t) t
-
-//
-// The following types are currently defined:
-// EFI_FROM_ID has been defined in UEFI spec.
-//
-typedef UINT16 EFI_FORM_LABEL;
-
-#pragma pack(1)
-
-typedef struct {
- UINT32 Length;
- UINT16 Type;
-} EFI_HII_PACK_HEADER;
-
-//
-// A form list consists of a large variety of structure
-// possibilities so to represent the binary blob of data
-// associated with a package of forms, we will assume a
-// pointer to a self-describing data buffer.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
-} EFI_HII_IFR_PACK;
-
-typedef struct {
- EFI_HII_PACK_HEADER Header; // Must be filled in
- EFI_HANDLE ImageHandle; // Must be filled in
- EFI_HANDLE DeviceHandle; // Optional
- EFI_HANDLE ControllerHandle; // Optional
- EFI_HANDLE CallbackHandle; // Optional
- EFI_HANDLE COBExportHandle; // Optional
-} EFI_HII_HANDLE_PACK;
-
-//
-// ********************************************************
-// EFI_VARIABLE_CONTENTS
-// ********************************************************
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- EFI_GUID VariableGuid;
- UINT32 VariableNameLength;
- UINT16 VariableId;
- //
- // CHAR16 VariableName[]; //Null-terminated
- //
-} EFI_HII_VARIABLE_PACK;
-
-//
-// ********************************************************
-// EFI_DEVICE_PATH_PACK
-// ********************************************************
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- //
- // EFI_DEVICE_PATH DevicePath[];
- //
-} EFI_HII_DEVICE_PATH_PACK;
-
-//
-// ********************************************************
-// EFI_HII_DATA_TABLE
-// ********************************************************
-//
-typedef struct {
- EFI_HII_HANDLE HiiHandle;
- EFI_GUID PackageGuid;
- UINT32 DataTableSize;
- UINT32 IfrDataOffset;
- UINT32 StringDataOffset;
- UINT32 VariableDataOffset;
- UINT32 DevicePathOffset;
- UINT32 NumberOfVariableData;
- UINT32 NumberOfLanguages;
- //
- // EFI_HII_DEVICE_PATH_PACK DevicePath[];
- // EFI_HII_VARIABLE_PACK VariableData[];
- // EFI_HII_IFR_PACK IfrData;
- // EFI_HII_STRING_PACK StringData[];
- //
-} EFI_HII_DATA_TABLE;
-
-//
-// ********************************************************
-// EFI_HII_EXPORT_TABLE
-// ********************************************************
-//
-typedef struct {
- UINT32 NumberOfHiiDataTables;
- EFI_GUID Revision;
- //
- // EFI_HII_DATA_TABLE HiiDataTable[];
- //
-} EFI_HII_EXPORT_TABLE;
-
-typedef struct {
- BOOLEAN FormSetUpdate; // If TRUE, next variable is significant
- EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info
- BOOLEAN FormUpdate; // If TRUE, next variable is significant
- UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE.
- STRING_REF FormTitle; // If not 0, will update Form with this info
- UINT16 DataCount; // The number of Data entries in this structure
- UINT8 *Data; // An array of 1+ op-codes, specified by DataCount
-} EFI_HII_UPDATE_DATA;
-
-//
-// String attributes
-//
-#define LANG_RIGHT_TO_LEFT 0x00000001
-
-//
-// A string package is used to localize strings to a particular
-// language. The package is associated with a particular driver
-// or set of drivers. Tools are used to associate tokens with
-// string references in forms and in programs. These tokens are
-// language agnostic. When paired with a language pack (directly
-// or indirectly), the string token resolves into an actual
-// UNICODE string. The NumStringPointers determines how many
-// StringPointers (offset values) there are as well as the total
-// number of Strings that are defined.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- RELOFST LanguageNameString;
- RELOFST PrintableLanguageName;
- UINT32 NumStringPointers;
- UINT32 Attributes;
- //
- // RELOFST StringPointers[];
- // EFI_STRING Strings[];
- //
-} EFI_HII_STRING_PACK;
-
-//
-// Glyph Attributes
-//
-#define EFI_GLYPH_NON_SPACING 1
-#define EFI_GLYPH_WIDE 2
-
-typedef struct {
- CHAR16 UnicodeWeight;
- UINT8 Attributes;
- UINT8 GlyphCol1[GLYPH_HEIGHT];
-} EFI_NARROW_GLYPH;
-
-typedef struct {
- CHAR16 UnicodeWeight;
- UINT8 Attributes;
- UINT8 GlyphCol1[GLYPH_HEIGHT];
- UINT8 GlyphCol2[GLYPH_HEIGHT];
- UINT8 Pad[3];
-} EFI_WIDE_GLYPH;
-
-//
-// A font list consists of a font header followed by a series
-// of glyph structures. Note that fonts are not language specific.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- UINT16 NumberOfNarrowGlyphs;
- UINT16 NumberOfWideGlyphs;
-} EFI_HII_FONT_PACK;
-
-//
-// The IfrData in the EFI_HII_IFR_PACK structure definition
-// is variable length, and not really part of the header. To
-// simplify from code the size of the header, define an
-// identical structure that does not include the IfrData field.
-// Then use sizeof() this new structure to determine the
-// actual size of the header.
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
-} EFI_HII_IFR_PACK_HEADER;
-
-//
-// pedef EFI_HII_PACK_HEADER EFI_HII_IFR_PACK_HEADER;
-//
-typedef enum {
- EfiKeyLCtrl,
- EfiKeyA0,
- EfiKeyLAlt,
- EfiKeySpaceBar,
- EfiKeyA2,
- EfiKeyA3,
- EfiKeyA4,
- EfiKeyRCtrl,
- EfiKeyLeftArrow,
- EfiKeyDownArrow,
- EfiKeyRightArrow,
- EfiKeyZero,
- EfiKeyPeriod,
- EfiKeyEnter,
- EfiKeyLShift,
- EfiKeyB0,
- EfiKeyB1,
- EfiKeyB2,
- EfiKeyB3,
- EfiKeyB4,
- EfiKeyB5,
- EfiKeyB6,
- EfiKeyB7,
- EfiKeyB8,
- EfiKeyB9,
- EfiKeyB10,
- EfiKeyRshift,
- EfiKeyUpArrow,
- EfiKeyOne,
- EfiKeyTwo,
- EfiKeyThree,
- EfiKeyCapsLock,
- EfiKeyC1,
- EfiKeyC2,
- EfiKeyC3,
- EfiKeyC4,
- EfiKeyC5,
- EfiKeyC6,
- EfiKeyC7,
- EfiKeyC8,
- EfiKeyC9,
- EfiKeyC10,
- EfiKeyC11,
- EfiKeyC12,
- EfiKeyFour,
- EfiKeyFive,
- EfiKeySix,
- EfiKeyPlus,
- EfiKeyTab,
- EfiKeyD1,
- EfiKeyD2,
- EfiKeyD3,
- EfiKeyD4,
- EfiKeyD5,
- EfiKeyD6,
- EfiKeyD7,
- EfiKeyD8,
- EfiKeyD9,
- EfiKeyD10,
- EfiKeyD11,
- EfiKeyD12,
- EfiKeyD13,
- EfiKeyDel,
- EfiKeyEnd,
- EfiKeyPgDn,
- EfiKeySeven,
- EfiKeyEight,
- EfiKeyNine,
- EfiKeyE0,
- EfiKeyE1,
- EfiKeyE2,
- EfiKeyE3,
- EfiKeyE4,
- EfiKeyE5,
- EfiKeyE6,
- EfiKeyE7,
- EfiKeyE8,
- EfiKeyE9,
- EfiKeyE10,
- EfiKeyE11,
- EfiKeyE12,
- EfiKeyBackSpace,
- EfiKeyIns,
- EfiKeyHome,
- EfiKeyPgUp,
- EfiKeyNLck,
- EfiKeySlash,
- EfiKeyAsterisk,
- EfiKeyMinus,
- EfiKeyEsc,
- EfiKeyF1,
- EfiKeyF2,
- EfiKeyF3,
- EfiKeyF4,
- EfiKeyF5,
- EfiKeyF6,
- EfiKeyF7,
- EfiKeyF8,
- EfiKeyF9,
- EfiKeyF10,
- EfiKeyF11,
- EfiKeyF12,
- EfiKeyPrint,
- EfiKeySLck,
- EfiKeyPause
-} EFI_KEY;
-
-typedef struct {
- EFI_KEY Key;
- CHAR16 Unicode;
- CHAR16 ShiftedUnicode;
- CHAR16 AltGrUnicode;
- CHAR16 ShiftedAltGrUnicode;
- UINT16 Modifier;
-} EFI_KEY_DESCRIPTOR;
-
-//
-// This structure allows a sparse set of keys to be redefined
-// or a complete redefinition of the keyboard layout. Most
-// keyboards have a lot of commonality in their layouts, therefore
-// only defining those keys that need to change from the default
-// minimizes the passed in information.
-//
-// Additionally, when an update occurs, the active keyboard layout
-// will be switched to the newly updated keyboard layout. This
-// allows for situations that when a keyboard layout driver is
-// loaded as part of system initialization, the system will default
-// the keyboard behavior to the new layout.
-//
-// Each call to update the keyboard mapping should contain the
-// complete set of key descriptors to be updated, since every
-// call to the HII which contains an EFI_HII_KEYBOARD_PACK will
-// wipe the previous set of overrides. A call to
-//
-typedef struct {
- EFI_HII_PACK_HEADER Header;
- EFI_KEY_DESCRIPTOR *Descriptor;
- UINT8 DescriptorCount;
-} EFI_HII_KEYBOARD_PACK;
-
-//
-// The EFI_HII_PACKAGES can contain different types of packages just
-// after the structure as inline data.
-//
-typedef struct {
- UINTN NumberOfPackages;
- EFI_GUID *GuidId;
- //
- // EFI_HII_HANDLE_PACK *HandlePack; // Only one pack.
- // EFI_HII_IFR_PACK *IfrPack; // Only one pack.
- // EFI_HII_FONT_PACK *FontPack[]; // Multiple packs ok
- // EFI_HII_STRING_PACK *StringPack[]; // Multiple packs ok
- // EFI_HII_KEYBOARD_PACK *KeyboardPack[]; // Multiple packs ok
- //
-} EFI_HII_PACKAGES;
-
-typedef struct _EFI_HII_VARIABLE_PACK_LIST {
- struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack;
- EFI_HII_VARIABLE_PACK *VariablePack;
-} EFI_HII_VARIABLE_PACK_LIST;
-
-
-#pragma pack()
-
-/**
- Registers the various packs that are passed in via the Packages parameter.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Packages A pointer to an EFI_HII_PACKAGES package instance.
- @param Handle A pointer to the EFI_HII_HANDLE instance.
-
- @retval EFI_SUCCESS Data was extracted from Packages, the database
- was updated with the data, and Handle returned successfully.
- @retval EFI_INVALID_PARAMETER The content of Packages was invalid.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_NEW_PACK) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_PACKAGES *Packages,
- OUT EFI_HII_HANDLE *Handle
- );
-
-/**
- Removes a package from the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle that was registered to the data that is requested
- for removal.
-
- @retval EFI_SUCCESS The data associated with the Handle was removed
- from the HII database.
- @retval EFI_INVALID_PARAMETER The Handle was not valid.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_REMOVE_PACK) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle
- );
-
-/**
- Determines the handles that are currently active in the database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param HandleBufferLength On input, a pointer to the length of the handle
- buffer. On output, the length of the handle buffer that is required
- for the handles found.
- @param Handle An array of EFI_HII_HANDLE instances returned.
-
- @retval EFI_SUCCESS Handle was updated successfully.
- @retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter indicates
- that Handle is too small to support the number of handles.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_FIND_HANDLES) (
- IN EFI_HII_PROTOCOL *This,
- IN OUT UINT16 *HandleBufferLength,
- OUT EFI_HII_HANDLE *Handle
- );
-
-/**
- Exports the contents of the database into a buffer.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle An EFI_HII_HANDLE that corresponds to the desired
- handle to export. If the value is 0, the entire database will be exported.
- In either case, the data will be exported in a format described by the
- structure definition of EFI_HII_EXPORT_TABLE.
- @param BufferSize
- On input, a pointer to the length of the buffer. On output, the length
- of the buffer that is required for the export data.
- @param Buffer A pointer to a buffer that will contain the results of the export function.
-
- @retval EFI_SUCCESS The buffer was successfully filled with BufferSize amount of data.
- @retval EFI_BUFFER_TOO_SMALL The value in BufferSize was too small to contain the export data.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_EXPORT) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN OUT UINTN *BufferSize,
- OUT VOID *Buffer
- );
-
-/**
- Remove any new strings that were added after the initial string export
- for this handle.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle on which the string resides.
-
- @retval EFI_SUCCESS Remove strings from the handle successfully.
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_RESET_STRINGS) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle
- );
-
-/**
- Tests if all of the characters in a string have corresponding font characters.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param StringToTest A pointer to a Unicode string.
- @param FirstMissing A pointer to an index into the string. On input,
- the index of the first character in the StringToTest to examine. On exit,
- the index of the first character encountered for which a glyph is unavailable.
- If all glyphs in the string are available, the index is the index of the
- terminator of the string.
- @param GlyphBufferSize A pointer to a value. On output, if the function
- returns EFI_SUCCESS, it contains the amount of memory that is required to
- store the string's glyph equivalent.
-
- @retval EFI_SUCCESS All glyphs are available. Note that an empty string
- always returns this value.
- @retval EFI_NOT_FOUND A glyph was not found for a character.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_TEST_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *StringToTest,
- IN OUT UINT32 *FirstMissing,
- OUT UINT32 *GlyphBufferSize
- );
-
-/**
- Translates a Unicode character into the corresponding font glyph.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Source A pointer to a Unicode string.
- @param Index On input, the offset into the string from which to fetch
- the character.On successful completion, the index is updated to the first
- character past the character(s) making up the just extracted glyph.
- @param GlyphBuffer Pointer to an array where the glyphs corresponding
- to the characters in the source may be stored. GlyphBuffer is assumed
- to be wide enough to accept a wide glyph character.
- @param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by
- this value is filled with the length of the glyph in pixels. It is unchanged
- if the call was unsuccessful.
- @param InternalStatus The cell pointed to by this parameter must be
- initialized to zero prior to invoking the call the first time for any string.
-
- @retval EFI_SUCCESS It worked.
- @retval EFI_NOT_FOUND A glyph for a character was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_GLYPH) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *Source,
- IN OUT UINT16 *Index,
- OUT UINT8 **GlyphBuffer,
- OUT UINT16 *BitWidth,
- IN OUT UINT32 *InternalStatus
- );
-
-/**
- Translates a glyph into the format required for input to the Universal
- Graphics Adapter (UGA) Block Transfer (BLT) routines.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param GlyphBuffer A pointer to the buffer that contains glyph data.
- @param Foreground The foreground setting requested to be used for the
- generated BltBuffer data.
- @param Background The background setting requested to be used for the
- generated BltBuffer data.
- @param Count The entry in the BltBuffer upon which to act.
- @param Width The width in bits of the glyph being converted.
- @param Height The height in bits of the glyph being converted
- @param BltBuffer A pointer to the buffer that contains the data that is
- ready to be used by the UGA BLT routines.
-
- @retval EFI_SUCCESS It worked.
- @retval EFI_NOT_FOUND A glyph for a character was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GLYPH_TO_BLT) (
- IN EFI_HII_PROTOCOL *This,
- IN UINT8 *GlyphBuffer,
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground,
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background,
- IN UINTN Count,
- IN UINTN Width,
- IN UINTN Height,
- IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer
- );
-
-/**
- Allows a new string to be added to an already existing string package.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Pointer to a NULL-terminated string containing a single ISO 639-2
- language identifier, indicating the language in which the string is translated.
- @param Handle The handle of the language pack to which the string is to be added.
- @param Reference The identifier of the string to be added. If the reference
- value is zero, then the string will be assigned a new identifier on that
- handle for the language specified. Otherwise, the string will be updated
- with the NewString Value.
- @param NewString The string to be added.
-
- @retval EFI_SUCCESS The string was effectively registered.
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_NEW_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN CHAR16 *Language,
- IN EFI_HII_HANDLE Handle,
- IN OUT STRING_REF *Reference,
- IN CHAR16 *NewString
- );
-
-/**
- Allows a program to determine the primary languages that are supported
- on a given handle.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle on which the strings reside.
- @param LanguageString A string allocated by GetPrimaryLanguages() that
- contains a list of all primary languages registered on the handle.
-
- @retval EFI_SUCCESS LanguageString was correctly returned.
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_PRI_LANGUAGES) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- OUT EFI_STRING *LanguageString
- );
-
-/**
- Allows a program to determine which secondary languages are supported
- on a given handle for a given primary language.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle on which the strings reside.
- @param PrimaryLanguage Pointer to a NULL-terminated string containing a single
- ISO 639-2 language identifier, indicating the primary language.
- @param LanguageString A string allocated by GetSecondaryLanguages()
- containing a list of all secondary languages registered on the handle.
-
- @retval EFI_SUCCESS LanguageString was correctly returned.
- @retval EFI_INVALID_PARAMETER The Handle was unknown.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_SEC_LANGUAGES) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN CHAR16 *PrimaryLanguage,
- OUT EFI_STRING *LanguageString
- );
-
-/**
- Extracts a string from a package already registered with the EFI HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle on which the string resides.
- @param Token The string token assigned to the string.
- @param Raw If TRUE, the string is returned unedited in the internal
- storage format described above. If false, the string returned is edited
- by replacing <cr> with <space> and by removing special characters such
- as the <wide> prefix.
- @param LanguageString Pointer to a NULL-terminated string containing a
- single ISO 639-2 language identifier, indicating the language to print.
- If the LanguageString is empty (starts with a NULL), the default system
- language will be used to determine the language.
- @param BufferLength Length of the StringBuffer.
- @param StringBuffer The buffer designed to receive the characters in the string.
-
- @retval EFI_SUCCESS StringBuffer is filled with a NULL-terminated string.
- @retval EFI_INVALID_PARAMETER The handle or string token is unknown.
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough to
- allow the entire string to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_STRING) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN STRING_REF Token,
- IN BOOLEAN Raw,
- IN CHAR16 *LanguageString,
- IN OUT UINTN *BufferLength,
- OUT EFI_STRING StringBuffer
- );
-
-/**
- Allows a program to extract a part of a string of not more than a given width.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The handle on which the string resides.
- @param Token The string token assigned to the string.
- @param Index On input, the offset into the string where the line is to start.
- On output, the index is updated to point to beyond the last character returned
- in the call.
- @param LineWidth The maximum width of the line in units of narrow glyphs.
- @param LanguageString Pointer to a NULL-terminated string containing a
- single ISO 639-2 language identifier, indicating the language to print.
- @param BufferLength Pointer to the length of the StringBuffer.
- @param StringBuffer The buffer designed to receive the characters in the string.
-
- @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line.
- @retval EFI_NOT_FOUND The font glyph for at least one of the characters in
- the string is not in the font database.
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
- to allow the entire string to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_LINE) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN STRING_REF Token,
- IN OUT UINT16 *Index,
- IN UINT16 LineWidth,
- IN CHAR16 *LanguageString,
- IN OUT UINT16 *BufferLength,
- OUT EFI_STRING StringBuffer
- );
-
-/**
- Allows a program to extract a form or form package that has previously
- been registered with the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle Handle on which the form resides.
- @param FormId The ID of the form to return. If the ID is zero,
- the entire form package is returned.
- @param BufferLength On input, the length of the Buffer. On output,
- the length of the returned buffer,
- @param Buffer The buffer designed to receive the form(s).
-
- @retval EFI_SUCCESS Buffer filled with the requested forms. BufferLength
- was updated.
- @retval EFI_INVALID_PARAMETER The handle is unknown.
- @retval EFI_NOT_FOUND A form on the requested handle cannot be found with
- the requested FormId.
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
- to allow the form to be stored.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_FORMS) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN EFI_FORM_ID FormId,
- IN OUT UINTN *BufferLength,
- OUT UINT8 *Buffer
- );
-
-/**
- Extracts the defaults that are associated with a given handle in the HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle The HII handle from which will have default data retrieved.
- @param DefaultMask The mask used to specify some type of default override when extracting
- the default image data.
- @param VariablePackList A indirect pointer to the first entry of a link list with
- type EFI_HII_VARIABLE_PACK_LIST.
-
- @retval EFI_SUCCESS The VariablePackList was populated with the appropriate
- default setting data.
- @retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s).
- @retval EFI_INVALID_PARAMETER The HII database entry associated with Handle
- contain invalid data.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN UINTN DefaultMask,
- OUT EFI_HII_VARIABLE_PACK_LIST **VariablePackList
- );
-
-/**
- Allows the caller to update a form or form package that has previously been
- registered with the EFI HII database.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param Handle Handle of the package where the form to be updated resides.
- @param Label The label inside the form package where the update is to take place.
- @param AddData If TRUE, adding data at a given Label; otherwise,
- if FALSE, removing data at a given Label.
- @param Data The buffer containing the new tags to insert after the Label
-
- @retval EFI_SUCCESS The form was updated with the new tags.
- @retval EFI_INVALID_PARAMETER The buffer for the buffer length does not
- contain an integral number of tags.
- @retval EFI_NOT_FOUND The Handle, Label, or FormId was not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_UPDATE_FORM) (
- IN EFI_HII_PROTOCOL *This,
- IN EFI_HII_HANDLE Handle,
- IN EFI_FORM_LABEL Label,
- IN BOOLEAN AddData,
- IN EFI_HII_UPDATE_DATA *Data
- );
-
-/**
- Retrieves the current keyboard layout.
-
- @param This A pointer to the EFI_HII_PROTOCOL instance.
- @param DescriptorCount A pointer to the number of Descriptor entries being
- described in the keyboard layout being retrieved.
- @param Descriptor A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR
- entries. Each entry will reflect the definition of a specific physical key.
-
- @retval EFI_SUCCESS The keyboard layout was retrieved successfully.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) (
- IN EFI_HII_PROTOCOL *This,
- OUT UINT16 *DescriptorCount,
- OUT EFI_KEY_DESCRIPTOR *Descriptor
- );
-
-/**
- @par Protocol Description:
- The HII Protocol manages the HII database, which is a repository for data
- having to do with fonts, strings, forms, keyboards, and other future human
- interface items.
-
- @param NewPack
- Extracts the various packs from a package list.
-
- @param RemovePack
- Removes a package from the HII database.
-
- @param FindHandles
- Determines the handles that are currently active in the database.
-
- @param ExportDatabase
- Export the entire contents of the database to a buffer.
-
- @param TestString
- Tests if all of the characters in a string have corresponding font characters.
-
- @param GetGlyph
- Translates a Unicode character into the corresponding font glyph.
-
- @param GlyphToBlt
- Converts a glyph value into a format that is ready for a UGA BLT command.
-
- @param NewString
- Allows a new string to be added to an already existing string package.
-
- @param GetPrimaryLanguages
- Allows a program to determine the primary languages that are supported
- on a given handle.
-
- @param GetSecondaryLanguages
- Allows a program to determine which secondary languages are supported
- on a given handle for a given primary language.
-
- @param GetString
- Extracts a string from a package that is already registered with the
- EFI HII database.
-
- @param ResetString
- Remove any new strings that were added after the initial string export
- for this handle.
-
- @param GetLine
- Allows a program to extract a part of a string of not more than a given width.
-
- @param GetForms
- Allows a program to extract a form or form package that has been previously registered.
-
- @param GetDefaultImage
- Allows a program to extract the nonvolatile image that represents the default storage image.
-
- @param UpdateForm
- Allows a program to update a previously registered form.
-
- @param GetKeyboardLayout
- Allows a program to extract the current keyboard layout.
-
-**/
-struct _EFI_HII_PROTOCOL {
- EFI_HII_NEW_PACK NewPack;
- EFI_HII_REMOVE_PACK RemovePack;
- EFI_HII_FIND_HANDLES FindHandles;
- EFI_HII_EXPORT ExportDatabase;
-
- EFI_HII_TEST_STRING TestString;
- EFI_HII_GET_GLYPH GetGlyph;
- EFI_HII_GLYPH_TO_BLT GlyphToBlt;
-
- EFI_HII_NEW_STRING NewString;
- EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;
- EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;
- EFI_HII_GET_STRING GetString;
- EFI_HII_RESET_STRINGS ResetStrings;
- EFI_HII_GET_LINE GetLine;
- EFI_HII_GET_FORMS GetForms;
- EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;
- EFI_HII_UPDATE_FORM UpdateForm;
-
- EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;
-};
-
-extern EFI_GUID gEfiHiiProtocolGuid;
-
-#endif
+/** @file
+ This file defines the Human Interface Infrastructure protocol which will
+ be used by resources which want to publish IFR/Font/String data and have it
+ collected by the Configuration engine.
+
+ @par Revision Reference:
+ This protocol is defined in HII spec 0.92.
+
+ Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _FRAMEWORK_HII_H_
+#define _FRAMEWORK_HII_H_
+
+//#include <PiDxe.h>
+
+//
+// To get EFI_GRAPHICS_OUTPUT_BLT_PIXEL,
+// is defined in MdePkg/Protocol/GraphicsOutput.h
+//
+#include <Protocol/GraphicsOutput.h>
+
+#define EFI_HII_PROTOCOL_GUID \
+ { \
+ 0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \
+ }
+
+// BugBug:
+//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+// If UGA goes away we need to put this some place. I'm not sure where?
+//
+//typedef struct {
+// UINT8 Blue;
+// UINT8 Green;
+// UINT8 Red;
+// UINT8 Reserved;
+//} EFI_UGA_PIXEL;
+
+//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+//
+
+typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;
+
+//
+// Global definition
+//
+#define NARROW_CHAR 0xFFF0
+#define WIDE_CHAR 0xFFF1
+#define NON_BREAKING_CHAR 0xFFF2
+#define GLYPH_WIDTH 8
+#define GLYPH_HEIGHT 19
+
+#define EFI_HII_FONT 1
+#define EFI_HII_STRING 2
+#define EFI_HII_IFR 3
+#define EFI_HII_KEYBOARD 4
+#define EFI_HII_HANDLES 5
+#define EFI_HII_VARIABLE 6
+#define EFI_HII_DEVICE_PATH 7
+
+
+// References to string tokens must use this macro to enable scanning for
+// token usages.
+//
+#define STRING_TOKEN(t) t
+
+//
+// The following types are currently defined:
+// EFI_FROM_ID has been defined in UEFI spec.
+//
+typedef UINT16 EFI_FORM_LABEL;
+
+#pragma pack(1)
+
+typedef struct {
+ UINT32 Length;
+ UINT16 Type;
+} EFI_HII_PACK_HEADER;
+
+//
+// A form list consists of a large variety of structure
+// possibilities so to represent the binary blob of data
+// associated with a package of forms, we will assume a
+// pointer to a self-describing data buffer.
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+} EFI_HII_IFR_PACK;
+
+typedef struct {
+ EFI_HII_PACK_HEADER Header; // Must be filled in
+ EFI_HANDLE ImageHandle; // Must be filled in
+ EFI_HANDLE DeviceHandle; // Optional
+ EFI_HANDLE ControllerHandle; // Optional
+ EFI_HANDLE CallbackHandle; // Optional
+ EFI_HANDLE COBExportHandle; // Optional
+} EFI_HII_HANDLE_PACK;
+
+//
+// ********************************************************
+// EFI_VARIABLE_CONTENTS
+// ********************************************************
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+ EFI_GUID VariableGuid;
+ UINT32 VariableNameLength;
+ UINT16 VariableId;
+ //
+ // CHAR16 VariableName[]; //Null-terminated
+ //
+} EFI_HII_VARIABLE_PACK;
+
+//
+// ********************************************************
+// EFI_DEVICE_PATH_PACK
+// ********************************************************
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+ //
+ // EFI_DEVICE_PATH DevicePath[];
+ //
+} EFI_HII_DEVICE_PATH_PACK;
+
+//
+// ********************************************************
+// EFI_HII_DATA_TABLE
+// ********************************************************
+//
+typedef struct {
+ EFI_HII_HANDLE HiiHandle;
+ EFI_GUID PackageGuid;
+ UINT32 DataTableSize;
+ UINT32 IfrDataOffset;
+ UINT32 StringDataOffset;
+ UINT32 VariableDataOffset;
+ UINT32 DevicePathOffset;
+ UINT32 NumberOfVariableData;
+ UINT32 NumberOfLanguages;
+ //
+ // EFI_HII_DEVICE_PATH_PACK DevicePath[];
+ // EFI_HII_VARIABLE_PACK VariableData[];
+ // EFI_HII_IFR_PACK IfrData;
+ // EFI_HII_STRING_PACK StringData[];
+ //
+} EFI_HII_DATA_TABLE;
+
+//
+// ********************************************************
+// EFI_HII_EXPORT_TABLE
+// ********************************************************
+//
+typedef struct {
+ UINT32 NumberOfHiiDataTables;
+ EFI_GUID Revision;
+ //
+ // EFI_HII_DATA_TABLE HiiDataTable[];
+ //
+} EFI_HII_EXPORT_TABLE;
+
+typedef struct {
+ BOOLEAN FormSetUpdate; // If TRUE, next variable is significant
+ EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info
+ BOOLEAN FormUpdate; // If TRUE, next variable is significant
+ UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE.
+ STRING_REF FormTitle; // If not 0, will update Form with this info
+ UINT16 DataCount; // The number of Data entries in this structure
+ UINT8 *Data; // An array of 1+ op-codes, specified by DataCount
+} EFI_HII_UPDATE_DATA;
+
+//
+// String attributes
+//
+#define LANG_RIGHT_TO_LEFT 0x00000001
+
+//
+// A string package is used to localize strings to a particular
+// language. The package is associated with a particular driver
+// or set of drivers. Tools are used to associate tokens with
+// string references in forms and in programs. These tokens are
+// language agnostic. When paired with a language pack (directly
+// or indirectly), the string token resolves into an actual
+// UNICODE string. The NumStringPointers determines how many
+// StringPointers (offset values) there are as well as the total
+// number of Strings that are defined.
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+ RELOFST LanguageNameString;
+ RELOFST PrintableLanguageName;
+ UINT32 NumStringPointers;
+ UINT32 Attributes;
+ //
+ // RELOFST StringPointers[];
+ // EFI_STRING Strings[];
+ //
+} EFI_HII_STRING_PACK;
+
+//
+// Glyph Attributes
+//
+#define EFI_GLYPH_NON_SPACING 1
+#define EFI_GLYPH_WIDE 2
+
+typedef struct {
+ CHAR16 UnicodeWeight;
+ UINT8 Attributes;
+ UINT8 GlyphCol1[GLYPH_HEIGHT];
+} EFI_NARROW_GLYPH;
+
+typedef struct {
+ CHAR16 UnicodeWeight;
+ UINT8 Attributes;
+ UINT8 GlyphCol1[GLYPH_HEIGHT];
+ UINT8 GlyphCol2[GLYPH_HEIGHT];
+ UINT8 Pad[3];
+} EFI_WIDE_GLYPH;
+
+//
+// A font list consists of a font header followed by a series
+// of glyph structures. Note that fonts are not language specific.
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+ UINT16 NumberOfNarrowGlyphs;
+ UINT16 NumberOfWideGlyphs;
+} EFI_HII_FONT_PACK;
+
+//
+// The IfrData in the EFI_HII_IFR_PACK structure definition
+// is variable length, and not really part of the header. To
+// simplify from code the size of the header, define an
+// identical structure that does not include the IfrData field.
+// Then use sizeof() this new structure to determine the
+// actual size of the header.
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+} EFI_HII_IFR_PACK_HEADER;
+
+//
+// pedef EFI_HII_PACK_HEADER EFI_HII_IFR_PACK_HEADER;
+//
+typedef enum {
+ EfiKeyLCtrl,
+ EfiKeyA0,
+ EfiKeyLAlt,
+ EfiKeySpaceBar,
+ EfiKeyA2,
+ EfiKeyA3,
+ EfiKeyA4,
+ EfiKeyRCtrl,
+ EfiKeyLeftArrow,
+ EfiKeyDownArrow,
+ EfiKeyRightArrow,
+ EfiKeyZero,
+ EfiKeyPeriod,
+ EfiKeyEnter,
+ EfiKeyLShift,
+ EfiKeyB0,
+ EfiKeyB1,
+ EfiKeyB2,
+ EfiKeyB3,
+ EfiKeyB4,
+ EfiKeyB5,
+ EfiKeyB6,
+ EfiKeyB7,
+ EfiKeyB8,
+ EfiKeyB9,
+ EfiKeyB10,
+ EfiKeyRshift,
+ EfiKeyUpArrow,
+ EfiKeyOne,
+ EfiKeyTwo,
+ EfiKeyThree,
+ EfiKeyCapsLock,
+ EfiKeyC1,
+ EfiKeyC2,
+ EfiKeyC3,
+ EfiKeyC4,
+ EfiKeyC5,
+ EfiKeyC6,
+ EfiKeyC7,
+ EfiKeyC8,
+ EfiKeyC9,
+ EfiKeyC10,
+ EfiKeyC11,
+ EfiKeyC12,
+ EfiKeyFour,
+ EfiKeyFive,
+ EfiKeySix,
+ EfiKeyPlus,
+ EfiKeyTab,
+ EfiKeyD1,
+ EfiKeyD2,
+ EfiKeyD3,
+ EfiKeyD4,
+ EfiKeyD5,
+ EfiKeyD6,
+ EfiKeyD7,
+ EfiKeyD8,
+ EfiKeyD9,
+ EfiKeyD10,
+ EfiKeyD11,
+ EfiKeyD12,
+ EfiKeyD13,
+ EfiKeyDel,
+ EfiKeyEnd,
+ EfiKeyPgDn,
+ EfiKeySeven,
+ EfiKeyEight,
+ EfiKeyNine,
+ EfiKeyE0,
+ EfiKeyE1,
+ EfiKeyE2,
+ EfiKeyE3,
+ EfiKeyE4,
+ EfiKeyE5,
+ EfiKeyE6,
+ EfiKeyE7,
+ EfiKeyE8,
+ EfiKeyE9,
+ EfiKeyE10,
+ EfiKeyE11,
+ EfiKeyE12,
+ EfiKeyBackSpace,
+ EfiKeyIns,
+ EfiKeyHome,
+ EfiKeyPgUp,
+ EfiKeyNLck,
+ EfiKeySlash,
+ EfiKeyAsterisk,
+ EfiKeyMinus,
+ EfiKeyEsc,
+ EfiKeyF1,
+ EfiKeyF2,
+ EfiKeyF3,
+ EfiKeyF4,
+ EfiKeyF5,
+ EfiKeyF6,
+ EfiKeyF7,
+ EfiKeyF8,
+ EfiKeyF9,
+ EfiKeyF10,
+ EfiKeyF11,
+ EfiKeyF12,
+ EfiKeyPrint,
+ EfiKeySLck,
+ EfiKeyPause
+} EFI_KEY;
+
+typedef struct {
+ EFI_KEY Key;
+ CHAR16 Unicode;
+ CHAR16 ShiftedUnicode;
+ CHAR16 AltGrUnicode;
+ CHAR16 ShiftedAltGrUnicode;
+ UINT16 Modifier;
+} EFI_KEY_DESCRIPTOR;
+
+//
+// This structure allows a sparse set of keys to be redefined
+// or a complete redefinition of the keyboard layout. Most
+// keyboards have a lot of commonality in their layouts, therefore
+// only defining those keys that need to change from the default
+// minimizes the passed in information.
+//
+// Additionally, when an update occurs, the active keyboard layout
+// will be switched to the newly updated keyboard layout. This
+// allows for situations that when a keyboard layout driver is
+// loaded as part of system initialization, the system will default
+// the keyboard behavior to the new layout.
+//
+// Each call to update the keyboard mapping should contain the
+// complete set of key descriptors to be updated, since every
+// call to the HII which contains an EFI_HII_KEYBOARD_PACK will
+// wipe the previous set of overrides. A call to
+//
+typedef struct {
+ EFI_HII_PACK_HEADER Header;
+ EFI_KEY_DESCRIPTOR *Descriptor;
+ UINT8 DescriptorCount;
+} EFI_HII_KEYBOARD_PACK;
+
+//
+// The EFI_HII_PACKAGES can contain different types of packages just
+// after the structure as inline data.
+//
+typedef struct {
+ UINTN NumberOfPackages;
+ EFI_GUID *GuidId;
+ //
+ // EFI_HII_HANDLE_PACK *HandlePack; // Only one pack.
+ // EFI_HII_IFR_PACK *IfrPack; // Only one pack.
+ // EFI_HII_FONT_PACK *FontPack[]; // Multiple packs ok
+ // EFI_HII_STRING_PACK *StringPack[]; // Multiple packs ok
+ // EFI_HII_KEYBOARD_PACK *KeyboardPack[]; // Multiple packs ok
+ //
+} EFI_HII_PACKAGES;
+
+typedef struct _EFI_HII_VARIABLE_PACK_LIST {
+ struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack;
+ EFI_HII_VARIABLE_PACK *VariablePack;
+} EFI_HII_VARIABLE_PACK_LIST;
+
+
+#pragma pack()
+
+/**
+ Registers the various packs that are passed in via the Packages parameter.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Packages A pointer to an EFI_HII_PACKAGES package instance.
+ @param Handle A pointer to the EFI_HII_HANDLE instance.
+
+ @retval EFI_SUCCESS Data was extracted from Packages, the database
+ was updated with the data, and Handle returned successfully.
+ @retval EFI_INVALID_PARAMETER The content of Packages was invalid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_NEW_PACK) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_PACKAGES *Packages,
+ OUT EFI_HII_HANDLE *Handle
+ );
+
+/**
+ Removes a package from the HII database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle that was registered to the data that is requested
+ for removal.
+
+ @retval EFI_SUCCESS The data associated with the Handle was removed
+ from the HII database.
+ @retval EFI_INVALID_PARAMETER The Handle was not valid.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_REMOVE_PACK) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle
+ );
+
+/**
+ Determines the handles that are currently active in the database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param HandleBufferLength On input, a pointer to the length of the handle
+ buffer. On output, the length of the handle buffer that is required
+ for the handles found.
+ @param Handle An array of EFI_HII_HANDLE instances returned.
+
+ @retval EFI_SUCCESS Handle was updated successfully.
+ @retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter indicates
+ that Handle is too small to support the number of handles.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_FIND_HANDLES) (
+ IN EFI_HII_PROTOCOL *This,
+ IN OUT UINT16 *HandleBufferLength,
+ OUT EFI_HII_HANDLE *Handle
+ );
+
+/**
+ Exports the contents of the database into a buffer.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle An EFI_HII_HANDLE that corresponds to the desired
+ handle to export. If the value is 0, the entire database will be exported.
+ In either case, the data will be exported in a format described by the
+ structure definition of EFI_HII_EXPORT_TABLE.
+ @param BufferSize
+ On input, a pointer to the length of the buffer. On output, the length
+ of the buffer that is required for the export data.
+ @param Buffer A pointer to a buffer that will contain the results of the export function.
+
+ @retval EFI_SUCCESS The buffer was successfully filled with BufferSize amount of data.
+ @retval EFI_BUFFER_TOO_SMALL The value in BufferSize was too small to contain the export data.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_EXPORT) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ );
+
+/**
+ Remove any new strings that were added after the initial string export
+ for this handle.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle on which the string resides.
+
+ @retval EFI_SUCCESS Remove strings from the handle successfully.
+ @retval EFI_INVALID_PARAMETER The Handle was unknown.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_RESET_STRINGS) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle
+ );
+
+/**
+ Tests if all of the characters in a string have corresponding font characters.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param StringToTest A pointer to a Unicode string.
+ @param FirstMissing A pointer to an index into the string. On input,
+ the index of the first character in the StringToTest to examine. On exit,
+ the index of the first character encountered for which a glyph is unavailable.
+ If all glyphs in the string are available, the index is the index of the
+ terminator of the string.
+ @param GlyphBufferSize A pointer to a value. On output, if the function
+ returns EFI_SUCCESS, it contains the amount of memory that is required to
+ store the string's glyph equivalent.
+
+ @retval EFI_SUCCESS All glyphs are available. Note that an empty string
+ always returns this value.
+ @retval EFI_NOT_FOUND A glyph was not found for a character.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_TEST_STRING) (
+ IN EFI_HII_PROTOCOL *This,
+ IN CHAR16 *StringToTest,
+ IN OUT UINT32 *FirstMissing,
+ OUT UINT32 *GlyphBufferSize
+ );
+
+/**
+ Translates a Unicode character into the corresponding font glyph.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Source A pointer to a Unicode string.
+ @param Index On input, the offset into the string from which to fetch
+ the character.On successful completion, the index is updated to the first
+ character past the character(s) making up the just extracted glyph.
+ @param GlyphBuffer Pointer to an array where the glyphs corresponding
+ to the characters in the source may be stored. GlyphBuffer is assumed
+ to be wide enough to accept a wide glyph character.
+ @param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by
+ this value is filled with the length of the glyph in pixels. It is unchanged
+ if the call was unsuccessful.
+ @param InternalStatus The cell pointed to by this parameter must be
+ initialized to zero prior to invoking the call the first time for any string.
+
+ @retval EFI_SUCCESS It worked.
+ @retval EFI_NOT_FOUND A glyph for a character was not found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_GLYPH) (
+ IN EFI_HII_PROTOCOL *This,
+ IN CHAR16 *Source,
+ IN OUT UINT16 *Index,
+ OUT UINT8 **GlyphBuffer,
+ OUT UINT16 *BitWidth,
+ IN OUT UINT32 *InternalStatus
+ );
+
+/**
+ Translates a glyph into the format required for input to the Universal
+ Graphics Adapter (UGA) Block Transfer (BLT) routines.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param GlyphBuffer A pointer to the buffer that contains glyph data.
+ @param Foreground The foreground setting requested to be used for the
+ generated BltBuffer data.
+ @param Background The background setting requested to be used for the
+ generated BltBuffer data.
+ @param Count The entry in the BltBuffer upon which to act.
+ @param Width The width in bits of the glyph being converted.
+ @param Height The height in bits of the glyph being converted
+ @param BltBuffer A pointer to the buffer that contains the data that is
+ ready to be used by the UGA BLT routines.
+
+ @retval EFI_SUCCESS It worked.
+ @retval EFI_NOT_FOUND A glyph for a character was not found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GLYPH_TO_BLT) (
+ IN EFI_HII_PROTOCOL *This,
+ IN UINT8 *GlyphBuffer,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background,
+ IN UINTN Count,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer
+ );
+
+/**
+ Allows a new string to be added to an already existing string package.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Pointer to a NULL-terminated string containing a single ISO 639-2
+ language identifier, indicating the language in which the string is translated.
+ @param Handle The handle of the language pack to which the string is to be added.
+ @param Reference The identifier of the string to be added. If the reference
+ value is zero, then the string will be assigned a new identifier on that
+ handle for the language specified. Otherwise, the string will be updated
+ with the NewString Value.
+ @param NewString The string to be added.
+
+ @retval EFI_SUCCESS The string was effectively registered.
+ @retval EFI_INVALID_PARAMETER The Handle was unknown.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_NEW_STRING) (
+ IN EFI_HII_PROTOCOL *This,
+ IN CHAR16 *Language,
+ IN EFI_HII_HANDLE Handle,
+ IN OUT STRING_REF *Reference,
+ IN CHAR16 *NewString
+ );
+
+/**
+ Allows a program to determine the primary languages that are supported
+ on a given handle.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle on which the strings reside.
+ @param LanguageString A string allocated by GetPrimaryLanguages() that
+ contains a list of all primary languages registered on the handle.
+
+ @retval EFI_SUCCESS LanguageString was correctly returned.
+ @retval EFI_INVALID_PARAMETER The Handle was unknown.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_PRI_LANGUAGES) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ OUT EFI_STRING *LanguageString
+ );
+
+/**
+ Allows a program to determine which secondary languages are supported
+ on a given handle for a given primary language.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle on which the strings reside.
+ @param PrimaryLanguage Pointer to a NULL-terminated string containing a single
+ ISO 639-2 language identifier, indicating the primary language.
+ @param LanguageString A string allocated by GetSecondaryLanguages()
+ containing a list of all secondary languages registered on the handle.
+
+ @retval EFI_SUCCESS LanguageString was correctly returned.
+ @retval EFI_INVALID_PARAMETER The Handle was unknown.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_SEC_LANGUAGES) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN CHAR16 *PrimaryLanguage,
+ OUT EFI_STRING *LanguageString
+ );
+
+/**
+ Extracts a string from a package already registered with the EFI HII database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle on which the string resides.
+ @param Token The string token assigned to the string.
+ @param Raw If TRUE, the string is returned unedited in the internal
+ storage format described above. If false, the string returned is edited
+ by replacing <cr> with <space> and by removing special characters such
+ as the <wide> prefix.
+ @param LanguageString Pointer to a NULL-terminated string containing a
+ single ISO 639-2 language identifier, indicating the language to print.
+ If the LanguageString is empty (starts with a NULL), the default system
+ language will be used to determine the language.
+ @param BufferLength Length of the StringBuffer.
+ @param StringBuffer The buffer designed to receive the characters in the string.
+
+ @retval EFI_SUCCESS StringBuffer is filled with a NULL-terminated string.
+ @retval EFI_INVALID_PARAMETER The handle or string token is unknown.
+ @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough to
+ allow the entire string to be stored.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_STRING) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN STRING_REF Token,
+ IN BOOLEAN Raw,
+ IN CHAR16 *LanguageString,
+ IN OUT UINTN *BufferLength,
+ OUT EFI_STRING StringBuffer
+ );
+
+/**
+ Allows a program to extract a part of a string of not more than a given width.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The handle on which the string resides.
+ @param Token The string token assigned to the string.
+ @param Index On input, the offset into the string where the line is to start.
+ On output, the index is updated to point to beyond the last character returned
+ in the call.
+ @param LineWidth The maximum width of the line in units of narrow glyphs.
+ @param LanguageString Pointer to a NULL-terminated string containing a
+ single ISO 639-2 language identifier, indicating the language to print.
+ @param BufferLength Pointer to the length of the StringBuffer.
+ @param StringBuffer The buffer designed to receive the characters in the string.
+
+ @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line.
+ @retval EFI_NOT_FOUND The font glyph for at least one of the characters in
+ the string is not in the font database.
+ @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
+ to allow the entire string to be stored.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_LINE) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN STRING_REF Token,
+ IN OUT UINT16 *Index,
+ IN UINT16 LineWidth,
+ IN CHAR16 *LanguageString,
+ IN OUT UINT16 *BufferLength,
+ OUT EFI_STRING StringBuffer
+ );
+
+/**
+ Allows a program to extract a form or form package that has previously
+ been registered with the HII database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle Handle on which the form resides.
+ @param FormId The ID of the form to return. If the ID is zero,
+ the entire form package is returned.
+ @param BufferLength On input, the length of the Buffer. On output,
+ the length of the returned buffer,
+ @param Buffer The buffer designed to receive the form(s).
+
+ @retval EFI_SUCCESS Buffer filled with the requested forms. BufferLength
+ was updated.
+ @retval EFI_INVALID_PARAMETER The handle is unknown.
+ @retval EFI_NOT_FOUND A form on the requested handle cannot be found with
+ the requested FormId.
+ @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough
+ to allow the form to be stored.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_FORMS) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN EFI_FORM_ID FormId,
+ IN OUT UINTN *BufferLength,
+ OUT UINT8 *Buffer
+ );
+
+/**
+ Extracts the defaults that are associated with a given handle in the HII database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle The HII handle from which will have default data retrieved.
+ @param DefaultMask The mask used to specify some type of default override when extracting
+ the default image data.
+ @param VariablePackList A indirect pointer to the first entry of a link list with
+ type EFI_HII_VARIABLE_PACK_LIST.
+
+ @retval EFI_SUCCESS The VariablePackList was populated with the appropriate
+ default setting data.
+ @retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s).
+ @retval EFI_INVALID_PARAMETER The HII database entry associated with Handle
+ contain invalid data.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN UINTN DefaultMask,
+ OUT EFI_HII_VARIABLE_PACK_LIST **VariablePackList
+ );
+
+/**
+ Allows the caller to update a form or form package that has previously been
+ registered with the EFI HII database.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param Handle Handle of the package where the form to be updated resides.
+ @param Label The label inside the form package where the update is to take place.
+ @param AddData If TRUE, adding data at a given Label; otherwise,
+ if FALSE, removing data at a given Label.
+ @param Data The buffer containing the new tags to insert after the Label
+
+ @retval EFI_SUCCESS The form was updated with the new tags.
+ @retval EFI_INVALID_PARAMETER The buffer for the buffer length does not
+ contain an integral number of tags.
+ @retval EFI_NOT_FOUND The Handle, Label, or FormId was not found.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_UPDATE_FORM) (
+ IN EFI_HII_PROTOCOL *This,
+ IN EFI_HII_HANDLE Handle,
+ IN EFI_FORM_LABEL Label,
+ IN BOOLEAN AddData,
+ IN EFI_HII_UPDATE_DATA *Data
+ );
+
+/**
+ Retrieves the current keyboard layout.
+
+ @param This A pointer to the EFI_HII_PROTOCOL instance.
+ @param DescriptorCount A pointer to the number of Descriptor entries being
+ described in the keyboard layout being retrieved.
+ @param Descriptor A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR
+ entries. Each entry will reflect the definition of a specific physical key.
+
+ @retval EFI_SUCCESS The keyboard layout was retrieved successfully.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) (
+ IN EFI_HII_PROTOCOL *This,
+ OUT UINT16 *DescriptorCount,
+ OUT EFI_KEY_DESCRIPTOR *Descriptor
+ );
+
+/**
+ @par Protocol Description:
+ The HII Protocol manages the HII database, which is a repository for data
+ having to do with fonts, strings, forms, keyboards, and other future human
+ interface items.
+
+ @param NewPack
+ Extracts the various packs from a package list.
+
+ @param RemovePack
+ Removes a package from the HII database.
+
+ @param FindHandles
+ Determines the handles that are currently active in the database.
+
+ @param ExportDatabase
+ Export the entire contents of the database to a buffer.
+
+ @param TestString
+ Tests if all of the characters in a string have corresponding font characters.
+
+ @param GetGlyph
+ Translates a Unicode character into the corresponding font glyph.
+
+ @param GlyphToBlt
+ Converts a glyph value into a format that is ready for a UGA BLT command.
+
+ @param NewString
+ Allows a new string to be added to an already existing string package.
+
+ @param GetPrimaryLanguages
+ Allows a program to determine the primary languages that are supported
+ on a given handle.
+
+ @param GetSecondaryLanguages
+ Allows a program to determine which secondary languages are supported
+ on a given handle for a given primary language.
+
+ @param GetString
+ Extracts a string from a package that is already registered with the
+ EFI HII database.
+
+ @param ResetString
+ Remove any new strings that were added after the initial string export
+ for this handle.
+
+ @param GetLine
+ Allows a program to extract a part of a string of not more than a given width.
+
+ @param GetForms
+ Allows a program to extract a form or form package that has been previously registered.
+
+ @param GetDefaultImage
+ Allows a program to extract the nonvolatile image that represents the default storage image.
+
+ @param UpdateForm
+ Allows a program to update a previously registered form.
+
+ @param GetKeyboardLayout
+ Allows a program to extract the current keyboard layout.
+
+**/
+struct _EFI_HII_PROTOCOL {
+ EFI_HII_NEW_PACK NewPack;
+ EFI_HII_REMOVE_PACK RemovePack;
+ EFI_HII_FIND_HANDLES FindHandles;
+ EFI_HII_EXPORT ExportDatabase;
+
+ EFI_HII_TEST_STRING TestString;
+ EFI_HII_GET_GLYPH GetGlyph;
+ EFI_HII_GLYPH_TO_BLT GlyphToBlt;
+
+ EFI_HII_NEW_STRING NewString;
+ EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;
+ EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;
+ EFI_HII_GET_STRING GetString;
+ EFI_HII_RESET_STRINGS ResetStrings;
+ EFI_HII_GET_LINE GetLine;
+ EFI_HII_GET_FORMS GetForms;
+ EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;
+ EFI_HII_UPDATE_FORM UpdateForm;
+
+ EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;
+};
+
+extern EFI_GUID gEfiHiiProtocolGuid;
+
+#endif
diff --git a/BaseTools/Source/C/Include/Protocol/UgaDraw.h b/BaseTools/Source/C/Include/Protocol/UgaDraw.h
index 412b000aeb..6c58660e14 100644
--- a/BaseTools/Source/C/Include/Protocol/UgaDraw.h
+++ b/BaseTools/Source/C/Include/Protocol/UgaDraw.h
@@ -1,161 +1,161 @@
-/** @file
- UGA Draw protocol from the EFI 1.1 specification.
-
- Abstraction of a very simple graphics device.
-
- Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __UGA_DRAW_H__
-#define __UGA_DRAW_H__
-
-#define EFI_UGA_DRAW_PROTOCOL_GUID \
- { \
- 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
- }
-
-typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
- @retval EFI_INVALID_PARAMETER One of the input args was NULL.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- OUT UINT32 *HorizontalResolution,
- OUT UINT32 *VerticalResolution,
- OUT UINT32 *ColorDepth,
- OUT UINT32 *RefreshRate
- )
-;
-
-/**
- Return the current video mode information.
-
- @param This Protocol instance pointer.
- @param HorizontalResolution Current video horizontal resolution in pixels
- @param VerticalResolution Current video vertical resolution in pixels
- @param ColorDepth Current video color depth in bits per pixel
- @param RefreshRate Current video refresh rate in Hz.
-
- @retval EFI_SUCCESS Mode information returned.
- @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE) (
- IN EFI_UGA_DRAW_PROTOCOL *This,
- IN UINT32 HorizontalResolution,
- IN UINT32 VerticalResolution,
- IN UINT32 ColorDepth,
- IN UINT32 RefreshRate
- )
-;
-
-typedef struct {
- UINT8 Blue;
- UINT8 Green;
- UINT8 Red;
- UINT8 Reserved;
-} EFI_UGA_PIXEL;
-
-typedef union {
- EFI_UGA_PIXEL Pixel;
- UINT32 Raw;
-} EFI_UGA_PIXEL_UNION;
-
-typedef enum {
- EfiUgaVideoFill,
- EfiUgaVideoToBltBuffer,
- EfiUgaBltBufferToVideo,
- EfiUgaVideoToVideo,
- EfiUgaBltMax
-} EFI_UGA_BLT_OPERATION;
-
-/**
- Type specifying a pointer to a function to perform an UGA Blt operation.
-
- The following table defines actions for BltOperations:
-
- <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
- directly to every pixel of the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- Only one pixel will be used from the BltBuffer. Delta is NOT used.
-
- <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
- the BltBuffer rectangle (DestinationX, DestinationY )
- (DestinationX + Width, DestinationY + Height). If DestinationX or
- DestinationY is not zero then Delta must be set to the length in bytes
- of a row in the BltBuffer.
-
- <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle
- (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
- video display rectangle (DestinationX, DestinationY)
- (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
- not zero then Delta must be set to the length in bytes of a row in the
- BltBuffer.
-
- <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
- (SourceX + Width, SourceY + Height) .to the video display rectangle
- (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
- The BltBuffer and Delta are not used in this mode.
-
-
- @param[in] This - Protocol instance pointer.
- @param[in] BltBuffer - Buffer containing data to blit into video buffer. This
- buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
- @param[in] BltOperation - Operation to perform on BlitBuffer and video memory
- @param[in] SourceX - X coordinate of source for the BltBuffer.
- @param[in] SourceY - Y coordinate of source for the BltBuffer.
- @param[in] DestinationX - X coordinate of destination for the BltBuffer.
- @param[in] DestinationY - Y coordinate of destination for the BltBuffer.
- @param[in] Width - Width of rectangle in BltBuffer in pixels.
- @param[in] Height - Height of rectangle in BltBuffer in pixels.
- @param[in] Delta - OPTIONAL
-
- @retval EFI_SUCCESS - The Blt operation completed.
- @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
- @retval EFI_DEVICE_ERROR - A hardware error occurred writing to the video buffer.
-
---*/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT) (
- IN EFI_UGA_DRAW_PROTOCOL * This,
- IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
- IN EFI_UGA_BLT_OPERATION BltOperation,
- IN UINTN SourceX,
- IN UINTN SourceY,
- IN UINTN DestinationX,
- IN UINTN DestinationY,
- IN UINTN Width,
- IN UINTN Height,
- IN UINTN Delta OPTIONAL
- );
-
-struct _EFI_UGA_DRAW_PROTOCOL {
- EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
- EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
- EFI_UGA_DRAW_PROTOCOL_BLT Blt;
-};
-
-extern EFI_GUID gEfiUgaDrawProtocolGuid;
-
-#endif
+/** @file
+ UGA Draw protocol from the EFI 1.1 specification.
+
+ Abstraction of a very simple graphics device.
+
+ Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __UGA_DRAW_H__
+#define __UGA_DRAW_H__
+
+#define EFI_UGA_DRAW_PROTOCOL_GUID \
+ { \
+ 0x982c298b, 0xf4fa, 0x41cb, {0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 } \
+ }
+
+typedef struct _EFI_UGA_DRAW_PROTOCOL EFI_UGA_DRAW_PROTOCOL;
+
+/**
+ Return the current video mode information.
+
+ @param This Protocol instance pointer.
+ @param HorizontalResolution Current video horizontal resolution in pixels
+ @param VerticalResolution Current video vertical resolution in pixels
+ @param ColorDepth Current video color depth in bits per pixel
+ @param RefreshRate Current video refresh rate in Hz.
+
+ @retval EFI_SUCCESS Mode information returned.
+ @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
+ @retval EFI_INVALID_PARAMETER One of the input args was NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_GET_MODE) (
+ IN EFI_UGA_DRAW_PROTOCOL *This,
+ OUT UINT32 *HorizontalResolution,
+ OUT UINT32 *VerticalResolution,
+ OUT UINT32 *ColorDepth,
+ OUT UINT32 *RefreshRate
+ )
+;
+
+/**
+ Return the current video mode information.
+
+ @param This Protocol instance pointer.
+ @param HorizontalResolution Current video horizontal resolution in pixels
+ @param VerticalResolution Current video vertical resolution in pixels
+ @param ColorDepth Current video color depth in bits per pixel
+ @param RefreshRate Current video refresh rate in Hz.
+
+ @retval EFI_SUCCESS Mode information returned.
+ @retval EFI_NOT_STARTED Video display is not initialized. Call SetMode ()
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_SET_MODE) (
+ IN EFI_UGA_DRAW_PROTOCOL *This,
+ IN UINT32 HorizontalResolution,
+ IN UINT32 VerticalResolution,
+ IN UINT32 ColorDepth,
+ IN UINT32 RefreshRate
+ )
+;
+
+typedef struct {
+ UINT8 Blue;
+ UINT8 Green;
+ UINT8 Red;
+ UINT8 Reserved;
+} EFI_UGA_PIXEL;
+
+typedef union {
+ EFI_UGA_PIXEL Pixel;
+ UINT32 Raw;
+} EFI_UGA_PIXEL_UNION;
+
+typedef enum {
+ EfiUgaVideoFill,
+ EfiUgaVideoToBltBuffer,
+ EfiUgaBltBufferToVideo,
+ EfiUgaVideoToVideo,
+ EfiUgaBltMax
+} EFI_UGA_BLT_OPERATION;
+
+/**
+ Type specifying a pointer to a function to perform an UGA Blt operation.
+
+ The following table defines actions for BltOperations:
+
+ <B>EfiUgaVideoFill</B> - Write data from the BltBuffer pixel (SourceX, SourceY)
+ directly to every pixel of the video display rectangle
+ (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ Only one pixel will be used from the BltBuffer. Delta is NOT used.
+
+ <B>EfiUgaVideoToBltBuffer</B> - Read data from the video display rectangle
+ (SourceX, SourceY) (SourceX + Width, SourceY + Height) and place it in
+ the BltBuffer rectangle (DestinationX, DestinationY )
+ (DestinationX + Width, DestinationY + Height). If DestinationX or
+ DestinationY is not zero then Delta must be set to the length in bytes
+ of a row in the BltBuffer.
+
+ <B>EfiUgaBltBufferToVideo</B> - Write data from the BltBuffer rectangle
+ (SourceX, SourceY) (SourceX + Width, SourceY + Height) directly to the
+ video display rectangle (DestinationX, DestinationY)
+ (DestinationX + Width, DestinationY + Height). If SourceX or SourceY is
+ not zero then Delta must be set to the length in bytes of a row in the
+ BltBuffer.
+
+ <B>EfiUgaVideoToVideo</B> - Copy from the video display rectangle (SourceX, SourceY)
+ (SourceX + Width, SourceY + Height) .to the video display rectangle
+ (DestinationX, DestinationY) (DestinationX + Width, DestinationY + Height).
+ The BltBuffer and Delta are not used in this mode.
+
+
+ @param[in] This - Protocol instance pointer.
+ @param[in] BltBuffer - Buffer containing data to blit into video buffer. This
+ buffer has a size of Width*Height*sizeof(EFI_UGA_PIXEL)
+ @param[in] BltOperation - Operation to perform on BlitBuffer and video memory
+ @param[in] SourceX - X coordinate of source for the BltBuffer.
+ @param[in] SourceY - Y coordinate of source for the BltBuffer.
+ @param[in] DestinationX - X coordinate of destination for the BltBuffer.
+ @param[in] DestinationY - Y coordinate of destination for the BltBuffer.
+ @param[in] Width - Width of rectangle in BltBuffer in pixels.
+ @param[in] Height - Height of rectangle in BltBuffer in pixels.
+ @param[in] Delta - OPTIONAL
+
+ @retval EFI_SUCCESS - The Blt operation completed.
+ @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
+ @retval EFI_DEVICE_ERROR - A hardware error occurred writing to the video buffer.
+
+--*/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_UGA_DRAW_PROTOCOL_BLT) (
+ IN EFI_UGA_DRAW_PROTOCOL * This,
+ IN EFI_UGA_PIXEL * BltBuffer, OPTIONAL
+ IN EFI_UGA_BLT_OPERATION BltOperation,
+ IN UINTN SourceX,
+ IN UINTN SourceY,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height,
+ IN UINTN Delta OPTIONAL
+ );
+
+struct _EFI_UGA_DRAW_PROTOCOL {
+ EFI_UGA_DRAW_PROTOCOL_GET_MODE GetMode;
+ EFI_UGA_DRAW_PROTOCOL_SET_MODE SetMode;
+ EFI_UGA_DRAW_PROTOCOL_BLT Blt;
+};
+
+extern EFI_GUID gEfiUgaDrawProtocolGuid;
+
+#endif
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-09 13:27:17 +0300