diff options
| author | kx <kx@radix.pro> | 2024-06-04 06:43:08 +0300 |
|---|---|---|
| committer | kx <kx@radix.pro> | 2024-06-04 06:43:08 +0300 |
| commit | 7e2ccccace24636f29ddc210b94606abd4c7e42b (patch) | |
| tree | 545d43ea12671048956cafeb12303e84d601e571 /MdeModulePkg/Bus/Ata/AtaAtapiPassThru | |
| parent | 27b044605cd5f6b33a3d231576003850b3fe305b (diff) | |
| download | edk2-trunk.tar.xz | |
Renormalized end-of-lines from master@27b044605cd5f6b33a3d231576003850b3fe305btrunk
Diffstat (limited to 'MdeModulePkg/Bus/Ata/AtaAtapiPassThru')
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c | 6424 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h | 794 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c | 5370 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h | 2594 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf | 150 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni | 34 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni | 28 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c | 488 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c | 5352 | ||||
| -rw-r--r-- | MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h | 396 |
10 files changed, 10815 insertions, 10815 deletions
diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c index c0c8ffbd9e..fe0a3b0233 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c @@ -1,3212 +1,3212 @@ -/** @file
- The file for AHCI mode of ATA host controller.
-
- Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
- (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "AtaAtapiPassThru.h"
-
-/**
- Read AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
-
- @return The register content read.
-
-**/
-UINT32
-EFIAPI
-AhciReadReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset
- )
-{
- UINT32 Data;
-
- ASSERT (PciIo != NULL);
-
- Data = 0;
-
- PciIo->Mem.Read (
- PciIo,
- EfiPciIoWidthUint32,
- EFI_AHCI_BAR_INDEX,
- (UINT64)Offset,
- 1,
- &Data
- );
-
- return Data;
-}
-
-/**
- Write AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
- @param Data The data used to write down.
-
-**/
-VOID
-EFIAPI
-AhciWriteReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset,
- IN UINT32 Data
- )
-{
- ASSERT (PciIo != NULL);
-
- PciIo->Mem.Write (
- PciIo,
- EfiPciIoWidthUint32,
- EFI_AHCI_BAR_INDEX,
- (UINT64)Offset,
- 1,
- &Data
- );
-
- return;
-}
-
-/**
- Do AND operation with the value of AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
- @param AndData The data used to do AND operation.
-
-**/
-VOID
-EFIAPI
-AhciAndReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset,
- IN UINT32 AndData
- )
-{
- UINT32 Data;
-
- ASSERT (PciIo != NULL);
-
- Data = AhciReadReg (PciIo, Offset);
-
- Data &= AndData;
-
- AhciWriteReg (PciIo, Offset, Data);
-}
-
-/**
- Do OR operation with the value of AHCI Operation register.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The operation register offset.
- @param OrData The data used to do OR operation.
-
-**/
-VOID
-EFIAPI
-AhciOrReg (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT32 Offset,
- IN UINT32 OrData
- )
-{
- UINT32 Data;
-
- ASSERT (PciIo != NULL);
-
- Data = AhciReadReg (PciIo, Offset);
-
- Data |= OrData;
-
- AhciWriteReg (PciIo, Offset, Data);
-}
-
-/**
- Wait for the value of the specified MMIO register set to the test value.
-
- @param PciIo The PCI IO protocol instance.
- @param Offset The MMIO address to test.
- @param MaskValue The mask value of memory.
- @param TestValue The test value of memory.
- @param Timeout The time out value for wait memory set, uses 100ns as a unit.
-
- @retval EFI_TIMEOUT The MMIO setting is time out.
- @retval EFI_SUCCESS The MMIO is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMmioSet (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINTN Offset,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT64 Delay;
- BOOLEAN InfiniteWait;
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
-
- do {
- //
- // Access PCI MMIO space to see if the value is the tested one.
- //
- Value = AhciReadReg (PciIo, (UINT32)Offset) & MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- Wait for the value of the specified system memory set to the test value.
-
- @param Address The system memory address to test.
- @param MaskValue The mask value of memory.
- @param TestValue The test value of memory.
- @param Timeout The time out value for wait memory set, uses 100ns as a unit.
-
- @retval EFI_TIMEOUT The system memory setting is time out.
- @retval EFI_SUCCESS The system memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMemSet (
- IN EFI_PHYSICAL_ADDRESS Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT64 Delay;
- BOOLEAN InfiniteWait;
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
-
- do {
- //
- // Access system memory to see if the value is the tested one.
- //
- // The system memory pointed by Address will be updated by the
- // SATA Host Controller, "volatile" is introduced to prevent
- // compiler from optimizing the access to the memory address
- // to only read once.
- //
- Value = *(volatile UINT32 *)(UINTN)Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- Check the memory status to the test value.
-
- @param[in] Address The memory address to test.
- @param[in] MaskValue The mask value of memory.
- @param[in] TestValue The test value of memory.
-
- @retval EFI_NOT_READY The memory is not set.
- @retval EFI_SUCCESS The memory is correct set.
-**/
-EFI_STATUS
-EFIAPI
-AhciCheckMemSet (
- IN UINTN Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue
- )
-{
- UINT32 Value;
-
- Value = *(volatile UINT32 *)Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- return EFI_NOT_READY;
-}
-
-/**
-
- Clear the port interrupt and error status. It will also clear
- HBA interrupt status.
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
-
-**/
-VOID
-EFIAPI
-AhciClearPortStatus (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port
- )
-{
- UINT32 Offset;
-
- //
- // Clear any error status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset));
-
- //
- // Clear any port interrupt status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset));
-
- //
- // Clear any HBA interrupt status
- //
- AhciWriteReg (PciIo, EFI_AHCI_IS_OFFSET, AhciReadReg (PciIo, EFI_AHCI_IS_OFFSET));
-}
-
-/**
- This function is used to dump the Status Registers and if there is ERR bit set
- in the Status Register, the Error Register's value is also be dumped.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
-**/
-VOID
-EFIAPI
-AhciDumpPortStatus (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- UINTN Offset;
- UINT32 Data;
- UINTN FisBaseAddr;
- EFI_STATUS Status;
-
- ASSERT (PciIo != NULL);
-
- if (AtaStatusBlock != NULL) {
- ZeroMem (AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
-
- FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
-
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H);
- if (!EFI_ERROR (Status)) {
- //
- // If D2H FIS is received, update StatusBlock with its content.
- //
- CopyMem (AtaStatusBlock, (UINT8 *)Offset, sizeof (EFI_ATA_STATUS_BLOCK));
- } else {
- //
- // If D2H FIS is not received, only update Status & Error field through PxTFD
- // as there is no other way to get the content of the Shadow Register Block.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- Data = AhciReadReg (PciIo, (UINT32)Offset);
-
- AtaStatusBlock->AtaStatus = (UINT8)Data;
- if ((AtaStatusBlock->AtaStatus & BIT0) != 0) {
- AtaStatusBlock->AtaError = (UINT8)(Data >> 8);
- }
- }
- }
-}
-
-/**
- Enable the FIS running for giving port.
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param Timeout The timeout value of enabling FIS, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The FIS enable setting fails.
- @retval EFI_TIMEOUT The FIS enable setting is time out.
- @retval EFI_SUCCESS The FIS enable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciEnableFisReceive (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE);
-
- return EFI_SUCCESS;
-}
-
-/**
- Disable the FIS running for giving port.
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param Timeout The timeout value of disabling FIS, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The FIS disable setting fails.
- @retval EFI_TIMEOUT The FIS disable setting is time out.
- @retval EFI_UNSUPPORTED The port is in running state.
- @retval EFI_SUCCESS The FIS disable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDisableFisReceive (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (PciIo, Offset);
-
- //
- // Before disabling Fis receive, the DMA engine of the port should NOT be in running status.
- //
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Check if the Fis receive DMA engine for the port is running.
- //
- if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
- return EFI_SUCCESS;
- }
-
- AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_FRE));
-
- return AhciWaitMmioSet (
- PciIo,
- Offset,
- EFI_AHCI_PORT_CMD_FR,
- 0,
- Timeout
- );
-}
-
-/**
- Build the command list, command table and prepare the fis receiver.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The timeout value of stop.
- @param CommandFis The control fis will be used for the transfer.
- @param CommandList The command list will be used for the transfer.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The length of the atapi command.
- @param CommandSlotNumber The command slot will be used for the transfer.
- @param DataPhysicalAddr The pointer to the data buffer pci bus master address.
- @param DataLength The data count to be transferred.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_COMMAND_FIS *CommandFis,
- IN EFI_AHCI_COMMAND_LIST *CommandList,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN UINT8 CommandSlotNumber,
- IN OUT VOID *DataPhysicalAddr,
- IN UINT32 DataLength
- )
-{
- UINT64 BaseAddr;
- UINT32 PrdtNumber;
- UINT32 PrdtIndex;
- UINTN RemainedData;
- UINTN MemAddr;
- DATA_64 Data64;
- UINT32 Offset;
-
- //
- // Filling the PRDT
- //
- PrdtNumber = (UINT32)DivU64x32 (((UINT64)DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1), EFI_AHCI_MAX_DATA_PER_PRDT);
-
- //
- // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB data block.
- // It also limits that the maximum amount of the PRDT entry in the command table
- // is 65535.
- //
- ASSERT (PrdtNumber <= 65535);
-
- Data64.Uint64 = (UINTN)(AhciRegisters->AhciRFis) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port;
-
- BaseAddr = Data64.Uint64;
-
- ZeroMem ((VOID *)((UINTN)BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
-
- ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE));
-
- CommandFis->AhciCFisPmNum = PortMultiplier;
-
- CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- if (AtapiCommand != NULL) {
- CopyMem (
- &AhciRegisters->AhciCommandTable->AtapiCmd,
- AtapiCommand,
- AtapiCommandLength
- );
-
- CommandList->AhciCmdA = 1;
- CommandList->AhciCmdP = 1;
-
- AhciOrReg (PciIo, Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- } else {
- AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- }
-
- RemainedData = (UINTN)DataLength;
- MemAddr = (UINTN)DataPhysicalAddr;
- CommandList->AhciCmdPrdtl = PrdtNumber;
-
- for (PrdtIndex = 0; PrdtIndex < PrdtNumber; PrdtIndex++) {
- if (RemainedData < EFI_AHCI_MAX_DATA_PER_PRDT) {
- AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = (UINT32)RemainedData - 1;
- } else {
- AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = EFI_AHCI_MAX_DATA_PER_PRDT - 1;
- }
-
- Data64.Uint64 = (UINT64)MemAddr;
- AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbau = Data64.Uint32.Upper32;
- RemainedData -= EFI_AHCI_MAX_DATA_PER_PRDT;
- MemAddr += EFI_AHCI_MAX_DATA_PER_PRDT;
- }
-
- //
- // Set the last PRDT to Interrupt On Complete
- //
- if (PrdtNumber > 0) {
- AhciRegisters->AhciCommandTable->PrdtTable[PrdtNumber - 1].AhciPrdtIoc = 1;
- }
-
- CopyMem (
- (VOID *)((UINTN)AhciRegisters->AhciCmdList + (UINTN)CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
- CommandList,
- sizeof (EFI_AHCI_COMMAND_LIST)
- );
-
- Data64.Uint64 = (UINT64)(UINTN)AhciRegisters->AhciCommandTablePciAddr;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier;
-}
-
-/**
- Build a command FIS.
-
- @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS data structure.
- @param AtaCommandBlock A pointer to the AhciBuildCommandFis data structure.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommandFis (
- IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
- )
-{
- ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
- //
- // Indicator it's a command
- //
- CmdFis->AhciCFisCmdInd = 0x1;
- CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
-
- CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
- CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
-
- CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
- CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp;
-
- CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
- CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
-
- CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
- CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
-
- CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
- CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
-
- CmdFis->AhciCFisDevHead = (UINT8)(AtaCommandBlock->AtaDeviceHead | 0xE0);
-}
-
-/**
- Wait until SATA device reports it is ready for operation.
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to reset.
-
- @retval EFI_SUCCESS Device ready for operation.
- @retval EFI_TIMEOUT Device failed to get ready within required period.
-**/
-EFI_STATUS
-AhciWaitDeviceReady (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port
- )
-{
- UINT32 PhyDetectDelay;
- UINT32 Data;
- UINT32 Offset;
-
- //
- // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ
- // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec.
- //
- PhyDetectDelay = 16 * 1000;
- do {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- if (AhciReadReg (PciIo, Offset) != 0) {
- AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset));
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
-
- Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_TFD_MASK;
- if (Data == 0) {
- break;
- }
-
- MicroSecondDelay (1000);
- PhyDetectDelay--;
- } while (PhyDetectDelay > 0);
-
- if (PhyDetectDelay == 0) {
- DEBUG ((DEBUG_ERROR, "Port %d Device not ready (TFD=0x%X)\n", Port, Data));
- return EFI_TIMEOUT;
- } else {
- return EFI_SUCCESS;
- }
-}
-
-/**
- Reset the SATA port. Algorithm follows AHCI spec 1.3.1 section 10.4.2
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to reset.
-
- @retval EFI_SUCCESS Port reset.
- @retval Others Failed to reset the port.
-**/
-EFI_STATUS
-AhciResetPort (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port
- )
-{
- UINT32 Offset;
- EFI_STATUS Status;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_DET_INIT);
- //
- // SW is required to keep DET set to 0x1 at least for 1 milisecond to ensure that
- // at least one COMRESET signal is sent.
- //
- MicroSecondDelay (1000);
- AhciAndReg (PciIo, Offset, ~(UINT32)EFI_AHCI_PORT_SSTS_DET_MASK);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS;
- Status = AhciWaitMmioSet (PciIo, Offset, EFI_AHCI_PORT_SSTS_DET_MASK, EFI_AHCI_PORT_SSTS_DET_PCE, ATA_ATAPI_TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return AhciWaitDeviceReady (PciIo, Port);
-}
-
-/**
- Recovers the SATA port from error condition.
- This function implements algorithm described in
- AHCI spec 1.3.1 section 6.2.2
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to check.
-
- @retval EFI_SUCCESS Port recovered.
- @retval Others Failed to recover port.
-**/
-EFI_STATUS
-AhciRecoverPortError (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port
- )
-{
- UINT32 Offset;
- UINT32 PortInterrupt;
- UINT32 PortTfd;
- EFI_STATUS Status;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- PortInterrupt = AhciReadReg (PciIo, Offset);
- if ((PortInterrupt & EFI_AHCI_PORT_IS_FATAL_ERROR_MASK) == 0) {
- //
- // No fatal error detected. Exit with success as port should still be operational.
- // No need to clear IS as it will be cleared when the next command starts.
- //
- return EFI_SUCCESS;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciAndReg (PciIo, Offset, ~(UINT32)EFI_AHCI_PORT_CMD_ST);
-
- Status = AhciWaitMmioSet (PciIo, Offset, EFI_AHCI_PORT_CMD_CR, 0, ATA_ATAPI_TIMEOUT);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Ahci port %d is in hung state, aborting recovery\n", Port));
- return Status;
- }
-
- //
- // If TFD.BSY or TFD.DRQ is still set it means that drive is hung and software has
- // to reset it before sending any additional commands.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (PciIo, Offset);
- if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
- Status = AhciResetPort (PciIo, Port);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Failed to reset the port %d\n", Port));
- return EFI_DEVICE_ERROR;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function will check if the failed command should be retired. Only error
- conditions which are a result of transient conditions on a link(either to system or to device).
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to check.
-
- @retval TRUE Command failure was caused by transient condition and should be retried
- @retval FALSE Command should not be retried
-**/
-BOOLEAN
-AhciShouldCmdBeRetried (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port
- )
-{
- UINT32 Offset;
- UINT32 PortInterrupt;
- UINT32 Serr;
- UINT32 Tfd;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- PortInterrupt = AhciReadReg (PciIo, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- Serr = AhciReadReg (PciIo, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- Tfd = AhciReadReg (PciIo, Offset);
-
- //
- // This can occur if there was a CRC error on a path from system memory to
- // host controller.
- //
- if (PortInterrupt & EFI_AHCI_PORT_IS_HBDS) {
- return TRUE;
- //
- // This can occur if there was a CRC error detected by host during communication
- // with the device
- //
- } else if ((PortInterrupt & (EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_INFS)) &&
- (Serr & EFI_AHCI_PORT_SERR_CRCE))
- {
- return TRUE;
- //
- // This can occur if there was a CRC error detected by device during communication
- // with the host. Device returns error status to host with D2H FIS.
- //
- } else if ((PortInterrupt & EFI_AHCI_PORT_IS_TFES) &&
- (Tfd & EFI_AHCI_PORT_TFD_ERR_INT_CRC))
- {
- return TRUE;
- }
-
- return FALSE;
-}
-
-/**
- Checks if specified FIS has been received.
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to check.
- @param[in] FisType FIS type for which to check.
-
- @retval EFI_SUCCESS FIS received.
- @retval EFI_NOT_READY FIS not received yet.
- @retval EFI_DEVICE_ERROR AHCI controller reported an error on port.
-**/
-EFI_STATUS
-AhciCheckFisReceived (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN SATA_FIS_TYPE FisType
- )
-{
- UINT32 Offset;
- UINT32 PortInterrupt;
- UINT32 PortTfd;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- PortInterrupt = AhciReadReg (PciIo, Offset);
- if ((PortInterrupt & EFI_AHCI_PORT_IS_ERROR_MASK) != 0) {
- DEBUG ((DEBUG_ERROR, "AHCI: Error interrupt reported PxIS: %X\n", PortInterrupt));
- return EFI_DEVICE_ERROR;
- }
-
- //
- // For PIO setup FIS - According to SATA 2.6 spec section 11.7, D2h FIS means an error encountered.
- // But Qemu and Marvel 9230 sata controller may just receive a D2h FIS from device
- // after the transaction is finished successfully.
- // To get better device compatibilities, we further check if the PxTFD's ERR bit is set.
- // By this way, we can know if there is a real error happened.
- //
- if (((FisType == SataFisD2H) && ((PortInterrupt & EFI_AHCI_PORT_IS_DHRS) != 0)) ||
- ((FisType == SataFisPioSetup) && ((PortInterrupt & (EFI_AHCI_PORT_IS_PSS | EFI_AHCI_PORT_IS_DHRS)) != 0)) ||
- ((FisType == SataFisDmaSetup) && ((PortInterrupt & (EFI_AHCI_PORT_IS_DSS | EFI_AHCI_PORT_IS_DHRS)) != 0)))
- {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (PciIo, (UINT32)Offset);
- if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- return EFI_NOT_READY;
-}
-
-/**
- Waits until specified FIS has been received.
-
- @param[in] PciIo Pointer to AHCI controller PciIo.
- @param[in] Port SATA port index on which to check.
- @param[in] Timeout Time after which function should stop polling.
- @param[in] FisType FIS type for which to check.
-
- @retval EFI_SUCCESS FIS received.
- @retval EFI_TIMEOUT FIS failed to arrive within a specified time period.
- @retval EFI_DEVICE_ERROR AHCI controller reported an error on port.
-**/
-EFI_STATUS
-AhciWaitUntilFisReceived (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT64 Timeout,
- IN SATA_FIS_TYPE FisType
- )
-{
- EFI_STATUS Status;
- BOOLEAN InfiniteWait;
- UINT64 Delay;
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- do {
- Status = AhciCheckFisReceived (PciIo, Port, FisType);
- if (Status != EFI_NOT_READY) {
- return Status;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- Prints contents of the ATA command block into the debug port.
-
- @param[in] AtaCommandBlock AtaCommandBlock to print.
- @param[in] DebugLevel Debug level on which to print.
-**/
-VOID
-AhciPrintCommandBlock (
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN UINT32 DebugLevel
- )
-{
- DEBUG ((DebugLevel, "ATA COMMAND BLOCK:\n"));
- DEBUG ((DebugLevel, "AtaCommand: %d\n", AtaCommandBlock->AtaCommand));
- DEBUG ((DebugLevel, "AtaFeatures: %X\n", AtaCommandBlock->AtaFeatures));
- DEBUG ((DebugLevel, "AtaSectorNumber: %d\n", AtaCommandBlock->AtaSectorNumber));
- DEBUG ((DebugLevel, "AtaCylinderLow: %X\n", AtaCommandBlock->AtaCylinderHigh));
- DEBUG ((DebugLevel, "AtaCylinderHigh: %X\n", AtaCommandBlock->AtaCylinderHigh));
- DEBUG ((DebugLevel, "AtaDeviceHead: %d\n", AtaCommandBlock->AtaDeviceHead));
- DEBUG ((DebugLevel, "AtaSectorNumberExp: %d\n", AtaCommandBlock->AtaSectorNumberExp));
- DEBUG ((DebugLevel, "AtaCylinderLowExp: %X\n", AtaCommandBlock->AtaCylinderLowExp));
- DEBUG ((DebugLevel, "AtaCylinderHighExp: %X\n", AtaCommandBlock->AtaCylinderHighExp));
- DEBUG ((DebugLevel, "AtaFeaturesExp: %X\n", AtaCommandBlock->AtaFeaturesExp));
- DEBUG ((DebugLevel, "AtaSectorCount: %d\n", AtaCommandBlock->AtaSectorCount));
- DEBUG ((DebugLevel, "AtaSectorCountExp: %d\n", AtaCommandBlock->AtaSectorCountExp));
-}
-
-/**
- Prints contents of the ATA status block into the debug port.
-
- @param[in] AtaStatusBlock AtaStatusBlock to print.
- @param[in] DebugLevel Debug level on which to print.
-**/
-VOID
-AhciPrintStatusBlock (
- IN EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT32 DebugLevel
- )
-{
- //
- // Skip NULL pointer
- //
- if (AtaStatusBlock == NULL) {
- return;
- }
-
- //
- // Only print status and error since we have all of the rest printed as
- // a part of command block print.
- //
- DEBUG ((DebugLevel, "ATA STATUS BLOCK:\n"));
- DEBUG ((DebugLevel, "AtaStatus: %d\n", AtaStatusBlock->AtaStatus));
- DEBUG ((DebugLevel, "AtaError: %d\n", AtaStatusBlock->AtaError));
-}
-
-/**
- Start a PIO data transfer on specific port.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] Read The transfer direction.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in, out] MemoryAddr The pointer to the data buffer.
- @param[in] DataCount The data count to be transferred.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS PhyAddr;
- VOID *Map;
- UINTN MapLength;
- EFI_PCI_IO_PROTOCOL_OPERATION Flag;
- EFI_AHCI_COMMAND_FIS CFis;
- EFI_AHCI_COMMAND_LIST CmdList;
- UINT32 PrdCount;
- UINT32 Retry;
- EFI_STATUS RecoveryStatus;
- BOOLEAN DoRetry;
-
- if (Read) {
- Flag = EfiPciIoOperationBusMasterWrite;
- } else {
- Flag = EfiPciIoOperationBusMasterRead;
- }
-
- //
- // construct command list and command table with pci bus address
- //
- MapLength = DataCount;
- Status = PciIo->Map (
- PciIo,
- Flag,
- MemoryAddr,
- &MapLength,
- &PhyAddr,
- &Map
- );
-
- if (EFI_ERROR (Status) || (DataCount != MapLength)) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- //
- // Package read needed
- //
- AhciBuildCommandFis (&CFis, AtaCommandBlock);
-
- ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
-
- CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
- CmdList.AhciCmdW = Read ? 0 : 1;
-
- for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) {
- AhciBuildCommand (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- (VOID *)(UINTN)PhyAddr,
- DataCount
- );
-
- DEBUG ((DEBUG_VERBOSE, "Starting command for PIO transfer:\n"));
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE);
- Status = AhciStartCommand (
- PciIo,
- Port,
- 0,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- break;
- }
-
- if (Read && (AtapiCommand == 0)) {
- Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisPioSetup);
- if (Status == EFI_SUCCESS) {
- PrdCount = *(volatile UINT32 *)(&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
- if (PrdCount == DataCount) {
- Status = EFI_SUCCESS;
- } else {
- Status = EFI_DEVICE_ERROR;
- }
- }
- } else {
- Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H);
- }
-
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "PIO command failed at retry %d\n", Retry));
- DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // needs to be called before error recovery
- RecoveryStatus = AhciRecoverPortError (PciIo, Port);
- if (!DoRetry || EFI_ERROR (RecoveryStatus)) {
- break;
- }
- } else {
- break;
- }
- }
-
- AhciStopCommand (
- PciIo,
- Port,
- Timeout
- );
-
- AhciDisableFisReceive (
- PciIo,
- Port,
- Timeout
- );
-
- PciIo->Unmap (
- PciIo,
- Map
- );
-
- AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock);
-
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "Failed to execute command for PIO transfer:\n"));
- //
- // Repeat command block here to make sure it is printed on
- // device error debug level.
- //
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR);
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR);
- } else {
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE);
- }
-
- return Status;
-}
-
-/**
- Start a DMA data transfer on specific port
-
- @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] Read The transfer direction.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in, out] MemoryAddr The pointer to the data buffer.
- @param[in] DataCount The data count to be transferred.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The DMA data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDmaTransfer (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS PhyAddr;
- VOID *Map;
- UINTN MapLength;
- EFI_PCI_IO_PROTOCOL_OPERATION Flag;
- EFI_AHCI_COMMAND_FIS CFis;
- EFI_AHCI_COMMAND_LIST CmdList;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_TPL OldTpl;
- UINT32 Retry;
- EFI_STATUS RecoveryStatus;
- BOOLEAN DoRetry;
-
- Map = NULL;
- PciIo = Instance->PciIo;
-
- if (PciIo == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Set Status to suppress incorrect compiler/analyzer warnings
- //
- Status = EFI_SUCCESS;
-
- //
- // DMA buffer allocation. Needs to be done only once for both sync and async
- // DMA transfers irrespective of number of retries.
- //
- if ((Task == NULL) || ((Task != NULL) && (Task->Map == NULL))) {
- if (Read) {
- Flag = EfiPciIoOperationBusMasterWrite;
- } else {
- Flag = EfiPciIoOperationBusMasterRead;
- }
-
- MapLength = DataCount;
- Status = PciIo->Map (
- PciIo,
- Flag,
- MemoryAddr,
- &MapLength,
- &PhyAddr,
- &Map
- );
-
- if (EFI_ERROR (Status) || (DataCount != MapLength)) {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- if (Task != NULL) {
- Task->Map = Map;
- }
- }
-
- if ((Task == NULL) || ((Task != NULL) && !Task->IsStart)) {
- AhciBuildCommandFis (&CFis, AtaCommandBlock);
-
- ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
-
- CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
- CmdList.AhciCmdW = Read ? 0 : 1;
- }
-
- if (Task == NULL) {
- //
- // Before starting the Blocking BlockIO operation, push to finish all non-blocking
- // BlockIO tasks.
- // Delay 100us to simulate the blocking time out checking.
- //
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- while (!IsListEmpty (&Instance->NonBlockingTaskList)) {
- AsyncNonBlockingTransferRoutine (NULL, Instance);
- //
- // Stall for 100us.
- //
- MicroSecondDelay (100);
- }
-
- gBS->RestoreTPL (OldTpl);
- for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) {
- AhciBuildCommand (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- (VOID *)(UINTN)PhyAddr,
- DataCount
- );
-
- DEBUG ((DEBUG_VERBOSE, "Starting command for sync DMA transfer:\n"));
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE);
- Status = AhciStartCommand (
- PciIo,
- Port,
- 0,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H);
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "DMA command failed at retry: %d\n", Retry));
- DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // needs to be called before error recovery
- RecoveryStatus = AhciRecoverPortError (PciIo, Port);
- if (!DoRetry || EFI_ERROR (RecoveryStatus)) {
- break;
- }
- } else {
- break;
- }
- }
- } else {
- if (!Task->IsStart) {
- AhciBuildCommand (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- (VOID *)(UINTN)PhyAddr,
- DataCount
- );
-
- DEBUG ((DEBUG_VERBOSE, "Starting command for async DMA transfer:\n"));
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE);
- Status = AhciStartCommand (
- PciIo,
- Port,
- 0,
- Timeout
- );
- if (!EFI_ERROR (Status)) {
- Task->IsStart = TRUE;
- }
- }
-
- if (Task->IsStart) {
- Status = AhciCheckFisReceived (PciIo, Port, SataFisD2H);
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "DMA command failed at retry: %d\n", Task->RetryTimes));
- DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // call this before error recovery
- RecoveryStatus = AhciRecoverPortError (PciIo, Port);
- //
- // If recovery passed mark the Task as not started and change the status
- // to EFI_NOT_READY. This will make the higher level call this function again
- // and on next call the command will be re-issued due to IsStart being FALSE.
- // This also makes the next condition decrement the RetryTimes.
- //
- if (DoRetry && (RecoveryStatus == EFI_SUCCESS)) {
- Task->IsStart = FALSE;
- Status = EFI_NOT_READY;
- }
- }
-
- if (Status == EFI_NOT_READY) {
- if (!Task->InfiniteWait && (Task->RetryTimes == 0)) {
- Status = EFI_TIMEOUT;
- } else {
- Task->RetryTimes--;
- }
- }
- }
- }
-
- //
- // For Blocking mode, the command should be stopped, the Fis should be disabled
- // and the PciIo should be unmapped.
- // For non-blocking mode, only when a error is happened (if the return status is
- // EFI_NOT_READY that means the command doesn't finished, try again.), first do the
- // context cleanup, then set the packet's Asb status.
- //
- if ((Task == NULL) ||
- ((Task != NULL) && (Status != EFI_NOT_READY))
- )
- {
- AhciStopCommand (
- PciIo,
- Port,
- Timeout
- );
-
- AhciDisableFisReceive (
- PciIo,
- Port,
- Timeout
- );
-
- PciIo->Unmap (
- PciIo,
- (Task != NULL) ? Task->Map : Map
- );
-
- if (Task != NULL) {
- Task->Packet->Asb->AtaStatus = 0x01;
- }
- }
-
- AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock);
-
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "Failed to execute command for DMA transfer:\n"));
- //
- // Repeat command block here to make sure it is printed on
- // device error debug level.
- //
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR);
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR);
- } else {
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE);
- }
-
- return Status;
-}
-
-/**
- Start a non data transfer on specific port.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The non data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciNonDataTransfer (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- EFI_STATUS Status;
- EFI_AHCI_COMMAND_FIS CFis;
- EFI_AHCI_COMMAND_LIST CmdList;
- UINT32 Retry;
- EFI_STATUS RecoveryStatus;
- BOOLEAN DoRetry;
-
- //
- // Package read needed
- //
- AhciBuildCommandFis (&CFis, AtaCommandBlock);
-
- ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
-
- CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
-
- for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) {
- AhciBuildCommand (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- NULL,
- 0
- );
-
- DEBUG ((DEBUG_VERBOSE, "Starting command for non data transfer:\n"));
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE);
- Status = AhciStartCommand (
- PciIo,
- Port,
- 0,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- break;
- }
-
- Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H);
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "Non data transfer failed at retry %d\n", Retry));
- DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // call this before error recovery
- RecoveryStatus = AhciRecoverPortError (PciIo, Port);
- if (!DoRetry || EFI_ERROR (RecoveryStatus)) {
- break;
- }
- } else {
- break;
- }
- }
-
- AhciStopCommand (
- PciIo,
- Port,
- Timeout
- );
-
- AhciDisableFisReceive (
- PciIo,
- Port,
- Timeout
- );
-
- AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock);
-
- if (Status == EFI_DEVICE_ERROR) {
- DEBUG ((DEBUG_ERROR, "Failed to execute command for non data transfer:\n"));
- //
- // Repeat command block here to make sure it is printed on
- // device error debug level.
- //
- AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR);
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR);
- } else {
- AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE);
- }
-
- return Status;
-}
-
-/**
- Stop command running for giving port
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param Timeout The timeout value of stop, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (PciIo, Offset);
-
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
- return EFI_SUCCESS;
- }
-
- if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
- AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_ST));
- }
-
- return AhciWaitMmioSet (
- PciIo,
- Offset,
- EFI_AHCI_PORT_CMD_CR,
- 0,
- Timeout
- );
-}
-
-/**
- Start command for give slot on specific port.
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param CommandSlot The number of Command Slot.
- @param Timeout The timeout value of start, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- )
-{
- UINT32 CmdSlotBit;
- EFI_STATUS Status;
- UINT32 PortStatus;
- UINT32 StartCmd;
- UINT32 PortTfd;
- UINT32 Offset;
- UINT32 Capability;
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET);
-
- CmdSlotBit = (UINT32)(1 << CommandSlot);
-
- AhciClearPortStatus (
- PciIo,
- Port
- );
-
- Status = AhciEnableFisReceive (
- PciIo,
- Port,
- Timeout
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- PortStatus = AhciReadReg (PciIo, Offset);
-
- StartCmd = 0;
- if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
- StartCmd = AhciReadReg (PciIo, Offset);
- StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
- StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (PciIo, Offset);
-
- if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
- if ((Capability & BIT24) != 0) {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_CLO);
-
- AhciWaitMmioSet (
- PciIo,
- Offset,
- EFI_AHCI_PORT_CMD_CLO,
- 0,
- Timeout
- );
- }
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
-
- //
- // Setting the command
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI;
- AhciAndReg (PciIo, Offset, 0);
- AhciOrReg (PciIo, Offset, CmdSlotBit);
-
- return EFI_SUCCESS;
-}
-
-/**
- Do AHCI HBA reset.
-
- @param PciIo The PCI IO protocol instance.
- @param Timeout The timeout value of reset, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset.
- @retval EFI_TIMEOUT The reset operation is time out.
- @retval EFI_SUCCESS AHCI controller is reset successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciReset (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT32 Value;
-
- //
- // Make sure that GHC.AE bit is set before accessing any AHCI registers.
- //
- Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET);
-
- if ((Value & EFI_AHCI_GHC_ENABLE) == 0) {
- AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
-
- do {
- Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET);
-
- if ((Value & EFI_AHCI_GHC_RESET) == 0) {
- break;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (Delay > 0);
-
- if (Delay == 0) {
- return EFI_TIMEOUT;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Send SMART Return Status command to check if the execution of SMART cmd is successful or not.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The port multiplier port number.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution.
- @retval Others Fail to get return status data.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciAtaSmartReturnStatusCheck (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- UINT8 LBAMid;
- UINT8 LBAHigh;
- UINTN FisBaseAddr;
- UINT32 Value;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
-
- //
- // Send S.M.A.R.T Read Return Status command to device
- //
- Status = AhciNonDataTransfer (
- PciIo,
- AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplier,
- NULL,
- 0,
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- REPORT_STATUS_CODE (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)
- );
- return EFI_DEVICE_ERROR;
- }
-
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)
- );
-
- FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);
-
- Value = *(UINT32 *)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET);
-
- if ((Value & EFI_AHCI_FIS_TYPE_MASK) == EFI_AHCI_FIS_REGISTER_D2H) {
- LBAMid = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[5];
- LBAHigh = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[6];
-
- if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {
- //
- // The threshold exceeded condition is not detected by the device
- //
- DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)
- );
- } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {
- //
- // The threshold exceeded condition is detected by the device
- //
- DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
- );
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Enable SMART command of the disk if supported.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The port multiplier port number.
- @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
-**/
-VOID
-EFIAPI
-AhciAtaSmartSupport (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_IDENTIFY_DATA *IdentifyData,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- //
- // Detect if the device supports S.M.A.R.T.
- //
- if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {
- //
- // S.M.A.R.T is not supported by the device
- //
- DEBUG ((
- DEBUG_INFO,
- "S.M.A.R.T feature is not supported at port [%d] PortMultiplier [%d]!\n",
- Port,
- PortMultiplier
- ));
- REPORT_STATUS_CODE (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)
- );
- } else {
- //
- // Check if the feature is enabled. If not, then enable S.M.A.R.T.
- //
- if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)
- );
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
-
- //
- // Send S.M.A.R.T Enable command to device
- //
- Status = AhciNonDataTransfer (
- PciIo,
- AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplier,
- NULL,
- 0,
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (!EFI_ERROR (Status)) {
- //
- // Send S.M.A.R.T AutoSave command to device
- //
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = 0xD2;
- AtaCommandBlock.AtaSectorCount = 0xF1;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
-
- Status = AhciNonDataTransfer (
- PciIo,
- AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplier,
- NULL,
- 0,
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
- }
- }
-
- AhciAtaSmartReturnStatusCheck (
- PciIo,
- AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplier,
- AtaStatusBlock
- );
-
- DEBUG ((
- DEBUG_INFO,
- "Enabled S.M.A.R.T feature at port [%d] PortMultiplier [%d]!\n",
- Port,
- PortMultiplier
- ));
- }
-
- return;
-}
-
-/**
- Send Buffer cmd to specific device.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The port multiplier port number.
- @param Buffer The data buffer to store IDENTIFY PACKET data.
-
- @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for executing.
- @retval EFI_SUCCESS The cmd executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciIdentify (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT EFI_IDENTIFY_DATA *Buffer
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
-
- if ((PciIo == NULL) || (AhciRegisters == NULL) || (Buffer == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
- AtaCommandBlock.AtaSectorCount = 1;
-
- Status = AhciPioTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- NULL,
- 0,
- TRUE,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Buffer,
- sizeof (EFI_IDENTIFY_DATA),
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- return Status;
-}
-
-/**
- Send Buffer cmd to specific device.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The port multiplier port number.
- @param Buffer The data buffer to store IDENTIFY PACKET data.
-
- @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for executing.
- @retval EFI_SUCCESS The cmd executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciIdentifyPacket (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT EFI_IDENTIFY_DATA *Buffer
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
-
- if ((PciIo == NULL) || (AhciRegisters == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE;
- AtaCommandBlock.AtaSectorCount = 1;
-
- Status = AhciPioTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- NULL,
- 0,
- TRUE,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Buffer,
- sizeof (EFI_IDENTIFY_DATA),
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- return Status;
-}
-
-/**
- Send SET FEATURE cmd on specific device.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The port multiplier port number.
- @param Feature The data to send Feature register.
- @param FeatureSpecificData The specific data for SET FEATURE cmd.
- @param Timeout The timeout value of SET FEATURE cmd, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for executing.
- @retval EFI_SUCCESS The cmd executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDeviceSetFeature (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN UINT16 Feature,
- IN UINT32 FeatureSpecificData,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES;
- AtaCommandBlock.AtaFeatures = (UINT8)Feature;
- AtaCommandBlock.AtaFeaturesExp = (UINT8)(Feature >> 8);
- AtaCommandBlock.AtaSectorCount = (UINT8)FeatureSpecificData;
- AtaCommandBlock.AtaSectorNumber = (UINT8)(FeatureSpecificData >> 8);
- AtaCommandBlock.AtaCylinderLow = (UINT8)(FeatureSpecificData >> 16);
- AtaCommandBlock.AtaCylinderHigh = (UINT8)(FeatureSpecificData >> 24);
-
- Status = AhciNonDataTransfer (
- PciIo,
- AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplier,
- NULL,
- 0,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Timeout,
- NULL
- );
-
- return Status;
-}
-
-/**
- This function is used to send out ATAPI commands conforms to the Packet Command
- with PIO Protocol.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The number of port multiplier.
- @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
-
- @retval EFI_SUCCESS send out the ATAPI packet command successfully
- and device sends data successfully.
- @retval EFI_DEVICE_ERROR the device failed to send data.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPacketCommandExecute (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
- )
-{
- EFI_STATUS Status;
- VOID *Buffer;
- UINT32 Length;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
- BOOLEAN Read;
-
- if ((Packet == NULL) || (Packet->Cdb == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
- AtaCommandBlock.AtaCommand = ATA_CMD_PACKET;
- //
- // No OVL; No DMA
- //
- AtaCommandBlock.AtaFeatures = 0x00;
- //
- // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device
- // determine how many data should be transferred.
- //
- AtaCommandBlock.AtaCylinderLow = (UINT8)(ATAPI_MAX_BYTE_COUNT & 0x00ff);
- AtaCommandBlock.AtaCylinderHigh = (UINT8)(ATAPI_MAX_BYTE_COUNT >> 8);
-
- if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
- Buffer = Packet->InDataBuffer;
- Length = Packet->InTransferLength;
- Read = TRUE;
- } else {
- Buffer = Packet->OutDataBuffer;
- Length = Packet->OutTransferLength;
- Read = FALSE;
- }
-
- if (Length == 0) {
- Status = AhciNonDataTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- Packet->Cdb,
- Packet->CdbLength,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Packet->Timeout,
- NULL
- );
- } else {
- Status = AhciPioTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- Packet->Cdb,
- Packet->CdbLength,
- Read,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Buffer,
- Length,
- Packet->Timeout,
- NULL
- );
- }
-
- return Status;
-}
-
-/**
- Allocate transfer-related data struct which is used at AHCI mode.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciCreateTransferDescriptor (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN OUT EFI_AHCI_REGISTERS *AhciRegisters
- )
-{
- EFI_STATUS Status;
- UINTN Bytes;
- VOID *Buffer;
-
- UINT32 Capability;
- UINT32 PortImplementBitMap;
- UINT8 MaxPortNumber;
- UINT8 MaxCommandSlotNumber;
- BOOLEAN Support64Bit;
- UINT64 MaxReceiveFisSize;
- UINT64 MaxCommandListSize;
- UINT64 MaxCommandTableSize;
- EFI_PHYSICAL_ADDRESS AhciRFisPciAddr;
- EFI_PHYSICAL_ADDRESS AhciCmdListPciAddr;
- EFI_PHYSICAL_ADDRESS AhciCommandTablePciAddr;
-
- Buffer = NULL;
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET);
- //
- // Get the number of command slots per port supported by this HBA.
- //
- MaxCommandSlotNumber = (UINT8)(((Capability & 0x1F00) >> 8) + 1);
- Support64Bit = (BOOLEAN)(((Capability & BIT31) != 0) ? TRUE : FALSE);
-
- PortImplementBitMap = AhciReadReg (PciIo, EFI_AHCI_PI_OFFSET);
- //
- // Get the highest bit of implemented ports which decides how many bytes are allocated for received FIS.
- //
- MaxPortNumber = (UINT8)(UINTN)(HighBitSet32 (PortImplementBitMap) + 1);
- if (MaxPortNumber == 0) {
- return EFI_DEVICE_ERROR;
- }
-
- MaxReceiveFisSize = MaxPortNumber * sizeof (EFI_AHCI_RECEIVED_FIS);
- Status = PciIo->AllocateBuffer (
- PciIo,
- AllocateAnyPages,
- EfiBootServicesData,
- EFI_SIZE_TO_PAGES ((UINTN)MaxReceiveFisSize),
- &Buffer,
- 0
- );
-
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- ZeroMem (Buffer, (UINTN)MaxReceiveFisSize);
-
- AhciRegisters->AhciRFis = Buffer;
- AhciRegisters->MaxReceiveFisSize = MaxReceiveFisSize;
- Bytes = (UINTN)MaxReceiveFisSize;
-
- Status = PciIo->Map (
- PciIo,
- EfiPciIoOperationBusMasterCommonBuffer,
- Buffer,
- &Bytes,
- &AhciRFisPciAddr,
- &AhciRegisters->MapRFis
- );
-
- if (EFI_ERROR (Status) || (Bytes != MaxReceiveFisSize)) {
- //
- // Map error or unable to map the whole RFis buffer into a contiguous region.
- //
- Status = EFI_OUT_OF_RESOURCES;
- goto Error6;
- }
-
- if ((!Support64Bit) && (AhciRFisPciAddr > 0x100000000ULL)) {
- //
- // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
- //
- Status = EFI_DEVICE_ERROR;
- goto Error5;
- }
-
- AhciRegisters->AhciRFisPciAddr = (EFI_AHCI_RECEIVED_FIS *)(UINTN)AhciRFisPciAddr;
-
- //
- // Allocate memory for command list
- // Note that the implementation is a single task model which only use a command list for all ports.
- //
- Buffer = NULL;
- MaxCommandListSize = MaxCommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST);
- Status = PciIo->AllocateBuffer (
- PciIo,
- AllocateAnyPages,
- EfiBootServicesData,
- EFI_SIZE_TO_PAGES ((UINTN)MaxCommandListSize),
- &Buffer,
- 0
- );
-
- if (EFI_ERROR (Status)) {
- //
- // Free mapped resource.
- //
- Status = EFI_OUT_OF_RESOURCES;
- goto Error5;
- }
-
- ZeroMem (Buffer, (UINTN)MaxCommandListSize);
-
- AhciRegisters->AhciCmdList = Buffer;
- AhciRegisters->MaxCommandListSize = MaxCommandListSize;
- Bytes = (UINTN)MaxCommandListSize;
-
- Status = PciIo->Map (
- PciIo,
- EfiPciIoOperationBusMasterCommonBuffer,
- Buffer,
- &Bytes,
- &AhciCmdListPciAddr,
- &AhciRegisters->MapCmdList
- );
-
- if (EFI_ERROR (Status) || (Bytes != MaxCommandListSize)) {
- //
- // Map error or unable to map the whole cmd list buffer into a contiguous region.
- //
- Status = EFI_OUT_OF_RESOURCES;
- goto Error4;
- }
-
- if ((!Support64Bit) && (AhciCmdListPciAddr > 0x100000000ULL)) {
- //
- // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
- //
- Status = EFI_DEVICE_ERROR;
- goto Error3;
- }
-
- AhciRegisters->AhciCmdListPciAddr = (EFI_AHCI_COMMAND_LIST *)(UINTN)AhciCmdListPciAddr;
-
- //
- // Allocate memory for command table
- // According to AHCI 1.3 spec, a PRD table can contain maximum 65535 entries.
- //
- Buffer = NULL;
- MaxCommandTableSize = sizeof (EFI_AHCI_COMMAND_TABLE);
-
- Status = PciIo->AllocateBuffer (
- PciIo,
- AllocateAnyPages,
- EfiBootServicesData,
- EFI_SIZE_TO_PAGES ((UINTN)MaxCommandTableSize),
- &Buffer,
- 0
- );
-
- if (EFI_ERROR (Status)) {
- //
- // Free mapped resource.
- //
- Status = EFI_OUT_OF_RESOURCES;
- goto Error3;
- }
-
- ZeroMem (Buffer, (UINTN)MaxCommandTableSize);
-
- AhciRegisters->AhciCommandTable = Buffer;
- AhciRegisters->MaxCommandTableSize = MaxCommandTableSize;
- Bytes = (UINTN)MaxCommandTableSize;
-
- Status = PciIo->Map (
- PciIo,
- EfiPciIoOperationBusMasterCommonBuffer,
- Buffer,
- &Bytes,
- &AhciCommandTablePciAddr,
- &AhciRegisters->MapCommandTable
- );
-
- if (EFI_ERROR (Status) || (Bytes != MaxCommandTableSize)) {
- //
- // Map error or unable to map the whole cmd list buffer into a contiguous region.
- //
- Status = EFI_OUT_OF_RESOURCES;
- goto Error2;
- }
-
- if ((!Support64Bit) && (AhciCommandTablePciAddr > 0x100000000ULL)) {
- //
- // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address.
- //
- Status = EFI_DEVICE_ERROR;
- goto Error1;
- }
-
- AhciRegisters->AhciCommandTablePciAddr = (EFI_AHCI_COMMAND_TABLE *)(UINTN)AhciCommandTablePciAddr;
-
- return EFI_SUCCESS;
- //
- // Map error or unable to map the whole CmdList buffer into a contiguous region.
- //
-Error1:
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapCommandTable
- );
-Error2:
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)MaxCommandTableSize),
- AhciRegisters->AhciCommandTable
- );
-Error3:
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapCmdList
- );
-Error4:
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)MaxCommandListSize),
- AhciRegisters->AhciCmdList
- );
-Error5:
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapRFis
- );
-Error6:
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)MaxReceiveFisSize),
- AhciRegisters->AhciRFis
- );
-
- return Status;
-}
-
-/**
- Read logs from SATA device.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The multiplier of port.
- @param Buffer The data buffer to store SATA logs.
- @param LogNumber The address of the log.
- @param PageNumber The page number of the log.
-
- @retval EFI_INVALID_PARAMETER PciIo, AhciRegisters or Buffer is NULL.
- @retval others Return status of AhciPioTransfer().
-**/
-EFI_STATUS
-AhciReadLogExt (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT UINT8 *Buffer,
- IN UINT8 LogNumber,
- IN UINT8 PageNumber
- )
-{
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
-
- if ((PciIo == NULL) || (AhciRegisters == NULL) || (Buffer == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- ///
- /// Read log from device
- ///
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
- ZeroMem (Buffer, 512);
-
- AtaCommandBlock.AtaCommand = ATA_CMD_READ_LOG_EXT;
- AtaCommandBlock.AtaSectorCount = 1;
- AtaCommandBlock.AtaSectorNumber = LogNumber;
- AtaCommandBlock.AtaCylinderLow = PageNumber;
-
- return AhciPioTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- NULL,
- 0,
- TRUE,
- &AtaCommandBlock,
- &AtaStatusBlock,
- Buffer,
- 512,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-}
-
-/**
- Enable DEVSLP of the disk if supported.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The multiplier of port.
- @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
-
- @retval EFI_SUCCESS The DEVSLP is enabled per policy successfully.
- @retval EFI_UNSUPPORTED The DEVSLP isn't supported by the controller/device and policy requires to enable it.
-**/
-EFI_STATUS
-AhciEnableDevSlp (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_IDENTIFY_DATA *IdentifyData
- )
-{
- EFI_STATUS Status;
- UINT32 Offset;
- UINT32 Capability2;
- UINT8 LogData[512];
- DEVSLP_TIMING_VARIABLES DevSlpTiming;
- UINT32 PortCmd;
- UINT32 PortDevSlp;
-
- if (mAtaAtapiPolicy->DeviceSleepEnable != 1) {
- return EFI_SUCCESS;
- }
-
- //
- // Do not enable DevSlp if DevSlp is not supported.
- //
- Capability2 = AhciReadReg (PciIo, AHCI_CAPABILITY2_OFFSET);
- DEBUG ((DEBUG_INFO, "AHCI CAPABILITY2 = %08x\n", Capability2));
- if ((Capability2 & AHCI_CAP2_SDS) == 0) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Do not enable DevSlp if DevSlp is not present
- // Do not enable DevSlp if Hot Plug or Mechanical Presence Switch is supported
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH;
- PortCmd = AhciReadReg (PciIo, Offset + EFI_AHCI_PORT_CMD);
- PortDevSlp = AhciReadReg (PciIo, Offset + AHCI_PORT_DEVSLP);
- DEBUG ((DEBUG_INFO, "Port CMD/DEVSLP = %08x / %08x\n", PortCmd, PortDevSlp));
- if (((PortDevSlp & AHCI_PORT_DEVSLP_DSP) == 0) ||
- ((PortCmd & (EFI_AHCI_PORT_CMD_HPCP | EFI_AHCI_PORT_CMD_MPSP)) != 0)
- )
- {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Do not enable DevSlp if the device doesn't support DevSlp
- //
- DEBUG ((
- DEBUG_INFO,
- "IDENTIFY DEVICE: [77] = %04x, [78] = %04x, [79] = %04x\n",
- IdentifyData->AtaData.reserved_77,
- IdentifyData->AtaData.serial_ata_features_supported,
- IdentifyData->AtaData.serial_ata_features_enabled
- ));
- if ((IdentifyData->AtaData.serial_ata_features_supported & BIT8) == 0) {
- DEBUG ((
- DEBUG_INFO,
- "DevSlp feature is not supported for device at port [%d] PortMultiplier [%d]!\n",
- Port,
- PortMultiplier
- ));
- return EFI_UNSUPPORTED;
- }
-
- //
- // Enable DevSlp when it is not enabled.
- //
- if ((IdentifyData->AtaData.serial_ata_features_enabled & BIT8) != 0) {
- Status = AhciDeviceSetFeature (
- PciIo,
- AhciRegisters,
- Port,
- 0,
- ATA_SUB_CMD_ENABLE_SATA_FEATURE,
- 0x09,
- ATA_ATAPI_TIMEOUT
- );
- DEBUG ((
- DEBUG_INFO,
- "DevSlp set feature for device at port [%d] PortMultiplier [%d] - %r\n",
- Port,
- PortMultiplier,
- Status
- ));
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- Status = AhciReadLogExt (PciIo, AhciRegisters, Port, PortMultiplier, LogData, 0x30, 0x08);
-
- //
- // Clear PxCMD.ST and PxDEVSLP.ADSE before updating PxDEVSLP.DITO and PxDEVSLP.MDAT.
- //
- AhciWriteReg (PciIo, Offset + EFI_AHCI_PORT_CMD, PortCmd & ~EFI_AHCI_PORT_CMD_ST);
- PortDevSlp &= ~AHCI_PORT_DEVSLP_ADSE;
- AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp);
-
- //
- // Set PxDEVSLP.DETO and PxDEVSLP.MDAT to 0.
- //
- PortDevSlp &= ~AHCI_PORT_DEVSLP_DETO_MASK;
- PortDevSlp &= ~AHCI_PORT_DEVSLP_MDAT_MASK;
- AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp);
- DEBUG ((DEBUG_INFO, "Read Log Ext at port [%d] PortMultiplier [%d] - %r\n", Port, PortMultiplier, Status));
- if (EFI_ERROR (Status)) {
- //
- // Assume DEVSLP TIMING VARIABLES is not supported if the Identify Device Data log (30h, 8) fails
- //
- ZeroMem (&DevSlpTiming, sizeof (DevSlpTiming));
- } else {
- CopyMem (&DevSlpTiming, &LogData[48], sizeof (DevSlpTiming));
- DEBUG ((
- DEBUG_INFO,
- "DevSlpTiming: Supported(%d), Deto(%d), Madt(%d)\n",
- DevSlpTiming.Supported,
- DevSlpTiming.Deto,
- DevSlpTiming.Madt
- ));
- }
-
- //
- // Use 20ms as default DETO when DEVSLP TIMING VARIABLES is not supported or the DETO is 0.
- //
- if ((DevSlpTiming.Supported == 0) || (DevSlpTiming.Deto == 0)) {
- DevSlpTiming.Deto = 20;
- }
-
- //
- // Use 10ms as default MADT when DEVSLP TIMING VARIABLES is not supported or the MADT is 0.
- //
- if ((DevSlpTiming.Supported == 0) || (DevSlpTiming.Madt == 0)) {
- DevSlpTiming.Madt = 10;
- }
-
- PortDevSlp |= DevSlpTiming.Deto << 2;
- PortDevSlp |= DevSlpTiming.Madt << 10;
- AhciOrReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp);
-
- if (mAtaAtapiPolicy->AggressiveDeviceSleepEnable == 1) {
- if ((Capability2 & AHCI_CAP2_SADM) != 0) {
- PortDevSlp &= ~AHCI_PORT_DEVSLP_DITO_MASK;
- PortDevSlp |= (625 << 15);
- AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp);
-
- PortDevSlp |= AHCI_PORT_DEVSLP_ADSE;
- AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp);
- }
- }
-
- AhciWriteReg (PciIo, Offset + EFI_AHCI_PORT_CMD, PortCmd);
-
- DEBUG ((
- DEBUG_INFO,
- "Enabled DevSlp feature at port [%d] PortMultiplier [%d], Port CMD/DEVSLP = %08x / %08x\n",
- Port,
- PortMultiplier,
- PortCmd,
- PortDevSlp
- ));
-
- return EFI_SUCCESS;
-}
-
-/**
- Spin-up disk if IDD was incomplete or PUIS feature is enabled
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The multiplier of port.
- @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
-
-**/
-EFI_STATUS
-AhciSpinUpDisk (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT EFI_IDENTIFY_DATA *IdentifyData
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_ATA_STATUS_BLOCK AtaStatusBlock;
- UINT8 Buffer[512];
-
- if (IdentifyData->AtaData.specific_config == ATA_SPINUP_CFG_REQUIRED_IDD_INCOMPLETE) {
- //
- // Use SET_FEATURE subcommand to spin up the device.
- //
- Status = AhciDeviceSetFeature (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- ATA_SUB_CMD_PUIS_SET_DEVICE_SPINUP,
- 0x00,
- ATA_SPINUP_TIMEOUT
- );
- DEBUG ((
- DEBUG_INFO,
- "CMD_PUIS_SET_DEVICE_SPINUP for device at port [%d] PortMultiplier [%d] - %r!\n",
- Port,
- PortMultiplier,
- Status
- ));
- if (EFI_ERROR (Status)) {
- return Status;
- }
- } else {
- ASSERT (IdentifyData->AtaData.specific_config == ATA_SPINUP_CFG_NOT_REQUIRED_IDD_INCOMPLETE);
-
- //
- // Use READ_SECTORS to spin up the device if SpinUp SET FEATURE subcommand is not supported
- //
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
- ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
- //
- // Perform READ SECTORS PIO Data-In command to Read LBA 0
- //
- AtaCommandBlock.AtaCommand = ATA_CMD_READ_SECTORS;
- AtaCommandBlock.AtaSectorCount = 0x1;
-
- Status = AhciPioTransfer (
- PciIo,
- AhciRegisters,
- Port,
- PortMultiplier,
- NULL,
- 0,
- TRUE,
- &AtaCommandBlock,
- &AtaStatusBlock,
- &Buffer,
- sizeof (Buffer),
- ATA_SPINUP_TIMEOUT,
- NULL
- );
- DEBUG ((
- DEBUG_INFO,
- "Read LBA 0 for device at port [%d] PortMultiplier [%d] - %r!\n",
- Port,
- PortMultiplier,
- Status
- ));
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- //
- // Read the complete IDENTIFY DEVICE data.
- //
- ZeroMem (IdentifyData, sizeof (*IdentifyData));
- Status = AhciIdentify (PciIo, AhciRegisters, Port, PortMultiplier, IdentifyData);
- if (EFI_ERROR (Status)) {
- DEBUG ((
- DEBUG_ERROR,
- "Read IDD failed for device at port [%d] PortMultiplier [%d] - %r!\n",
- Port,
- PortMultiplier,
- Status
- ));
- return Status;
- }
-
- DEBUG ((
- DEBUG_INFO,
- "IDENTIFY DEVICE: [0] = %016x, [2] = %016x, [83] = %016x, [86] = %016x\n",
- IdentifyData->AtaData.config,
- IdentifyData->AtaData.specific_config,
- IdentifyData->AtaData.command_set_supported_83,
- IdentifyData->AtaData.command_set_feature_enb_86
- ));
- //
- // Check if IDD is incomplete
- //
- if ((IdentifyData->AtaData.config & BIT2) != 0) {
- return EFI_DEVICE_ERROR;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Enable/disable/skip PUIS of the disk according to policy.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The multiplier of port.
-
-**/
-EFI_STATUS
-AhciPuisEnable (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier
- )
-{
- EFI_STATUS Status;
-
- Status = EFI_SUCCESS;
- if (mAtaAtapiPolicy->PuisEnable == 0) {
- Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, PortMultiplier, ATA_SUB_CMD_DISABLE_PUIS, 0x00, ATA_ATAPI_TIMEOUT);
- } else if (mAtaAtapiPolicy->PuisEnable == 1) {
- Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, PortMultiplier, ATA_SUB_CMD_ENABLE_PUIS, 0x00, ATA_ATAPI_TIMEOUT);
- }
-
- DEBUG ((
- DEBUG_INFO,
- "%a PUIS feature at port [%d] PortMultiplier [%d] - %r!\n",
- (mAtaAtapiPolicy->PuisEnable == 0) ? "Disable" : (
- (mAtaAtapiPolicy->PuisEnable == 1) ? "Enable" : "Skip"
- ),
- Port,
- PortMultiplier,
- Status
- ));
- return Status;
-}
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialization (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
- UINT32 Capability;
- UINT8 MaxPortNumber;
- UINT32 PortImplementBitMap;
-
- EFI_AHCI_REGISTERS *AhciRegisters;
-
- UINT8 Port;
- DATA_64 Data64;
- UINT32 Offset;
- UINT32 Data;
- EFI_IDENTIFY_DATA Buffer;
- EFI_ATA_DEVICE_TYPE DeviceType;
- EFI_ATA_COLLECTIVE_MODE *SupportedModes;
- EFI_ATA_TRANSFER_MODE TransferMode;
- UINT32 PhyDetectDelay;
- UINT32 Value;
-
- if (Instance == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- PciIo = Instance->PciIo;
- IdeInit = Instance->IdeControllerInit;
-
- Status = AhciReset (PciIo, EFI_AHCI_BUS_RESET_TIMEOUT);
-
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET);
-
- //
- // Make sure that GHC.AE bit is set before accessing any AHCI registers.
- //
- Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET);
-
- if ((Value & EFI_AHCI_GHC_ENABLE) == 0) {
- AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- //
- // Enable 64-bit DMA support in the PCI layer if this controller
- // supports it.
- //
- if ((Capability & EFI_AHCI_CAP_S64A) != 0) {
- Status = PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationEnable,
- EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
- NULL
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((
- DEBUG_WARN,
- "AhciModeInitialization: failed to enable 64-bit DMA on 64-bit capable controller (%r)\n",
- Status
- ));
- }
- }
-
- //
- // Get the number of command slots per port supported by this HBA.
- //
- MaxPortNumber = (UINT8)((Capability & 0x1F) + 1);
-
- //
- // Get the bit map of those ports exposed by this HBA.
- // It indicates which ports that the HBA supports are available for software to use.
- //
- PortImplementBitMap = AhciReadReg (PciIo, EFI_AHCI_PI_OFFSET);
-
- AhciRegisters = &Instance->AhciRegisters;
- Status = AhciCreateTransferDescriptor (PciIo, AhciRegisters);
-
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- for (Port = 0; Port < EFI_AHCI_MAX_PORTS; Port++) {
- if ((PortImplementBitMap & (((UINT32)BIT0) << Port)) != 0) {
- //
- // According to AHCI spec, MaxPortNumber should be equal or greater than the number of implemented ports.
- //
- if ((MaxPortNumber--) == 0) {
- //
- // Should never be here.
- //
- ASSERT (FALSE);
- return EFI_SUCCESS;
- }
-
- IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, Port);
-
- //
- // Initialize FIS Base Address Register and Command List Base Address Register for use.
- //
- Data64.Uint64 = (UINTN)(AhciRegisters->AhciRFisPciAddr) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port;
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32);
-
- Data64.Uint64 = (UINTN)(AhciRegisters->AhciCmdListPciAddr);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (PciIo, Offset);
- if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_POD);
- }
-
- if ((Capability & EFI_AHCI_CAP_SSS) != 0) {
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_SUD);
- }
-
- //
- // Disable aggressive power management.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
- //
- // Disable the reporting of the corresponding interrupt to system software.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE;
- AhciAndReg (PciIo, Offset, 0);
-
- //
- // Now inform the IDE Controller Init Module.
- //
- IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, Port);
-
- //
- // Enable FIS Receive DMA engine for the first D2H FIS.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE);
-
- //
- // Wait for the Phy to detect the presence of a device.
- //
- PhyDetectDelay = EFI_AHCI_BUS_PHY_DETECT_TIMEOUT;
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS;
- do {
- Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_SSTS_DET_MASK;
- if ((Data == EFI_AHCI_PORT_SSTS_DET_PCE) || (Data == EFI_AHCI_PORT_SSTS_DET)) {
- break;
- }
-
- MicroSecondDelay (1000);
- PhyDetectDelay--;
- } while (PhyDetectDelay > 0);
-
- if (PhyDetectDelay == 0) {
- //
- // No device detected at this port.
- // Clear PxCMD.SUD for those ports at which there are no device present.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_SUD));
- continue;
- }
-
- Status = AhciWaitDeviceReady (PciIo, Port);
- if (EFI_ERROR (Status)) {
- continue;
- }
-
- //
- // When the first D2H register FIS is received, the content of PxSIG register is updated.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG;
- Status = AhciWaitMmioSet (
- PciIo,
- Offset,
- 0x0000FFFF,
- 0x00000101,
- EFI_TIMER_PERIOD_SECONDS (16)
- );
- if (EFI_ERROR (Status)) {
- continue;
- }
-
- Data = AhciReadReg (PciIo, Offset);
- if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATAPI_DEVICE_SIG) {
- Status = AhciIdentifyPacket (PciIo, AhciRegisters, Port, 0, &Buffer);
-
- if (EFI_ERROR (Status)) {
- continue;
- }
-
- DeviceType = EfiIdeCdrom;
- } else if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATA_DEVICE_SIG) {
- Status = AhciIdentify (PciIo, AhciRegisters, Port, 0, &Buffer);
-
- if (EFI_ERROR (Status)) {
- REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED));
- continue;
- }
-
- DEBUG ((
- DEBUG_INFO,
- "IDENTIFY DEVICE: [0] = %016x, [2] = %016x, [83] = %016x, [86] = %016x\n",
- Buffer.AtaData.config,
- Buffer.AtaData.specific_config,
- Buffer.AtaData.command_set_supported_83,
- Buffer.AtaData.command_set_feature_enb_86
- ));
- if ((Buffer.AtaData.config & BIT2) != 0) {
- //
- // SpinUp disk if device reported incomplete IDENTIFY DEVICE.
- //
- Status = AhciSpinUpDisk (
- PciIo,
- AhciRegisters,
- Port,
- 0,
- &Buffer
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Spin up standby device failed - %r\n", Status));
- continue;
- }
- }
-
- DeviceType = EfiIdeHarddisk;
- } else {
- continue;
- }
-
- DEBUG ((
- DEBUG_INFO,
- "port [%d] port multitplier [%d] has a [%a]\n",
- Port,
- 0,
- DeviceType == EfiIdeCdrom ? "cdrom" : "harddisk"
- ));
-
- //
- // If the device is a hard disk, then try to enable S.M.A.R.T feature
- //
- if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) {
- AhciAtaSmartSupport (
- PciIo,
- AhciRegisters,
- Port,
- 0,
- &Buffer,
- NULL
- );
- }
-
- //
- // Submit identify data to IDE controller init driver
- //
- IdeInit->SubmitData (IdeInit, Port, 0, &Buffer);
-
- //
- // Now start to config ide device parameter and transfer mode.
- //
- Status = IdeInit->CalculateMode (
- IdeInit,
- Port,
- 0,
- &SupportedModes
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Calculate Mode Fail, Status = %r\n", Status));
- continue;
- }
-
- //
- // Set best supported PIO mode on this IDE device
- //
- if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) {
- TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO;
- } else {
- TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO;
- }
-
- TransferMode.ModeNumber = (UINT8)(SupportedModes->PioMode.Mode);
-
- //
- // Set supported DMA mode on this IDE device. Note that UDMA & MDMA can't
- // be set together. Only one DMA mode can be set to a device. If setting
- // DMA mode operation fails, we can continue moving on because we only use
- // PIO mode at boot time. DMA modes are used by certain kind of OS booting
- //
- if (SupportedModes->UdmaMode.Valid) {
- TransferMode.ModeCategory = EFI_ATA_MODE_UDMA;
- TransferMode.ModeNumber = (UINT8)(SupportedModes->UdmaMode.Mode);
- } else if (SupportedModes->MultiWordDmaMode.Valid) {
- TransferMode.ModeCategory = EFI_ATA_MODE_MDMA;
- TransferMode.ModeNumber = (UINT8)SupportedModes->MultiWordDmaMode.Mode;
- }
-
- Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, 0, 0x03, (UINT32)(*(UINT8 *)&TransferMode), ATA_ATAPI_TIMEOUT);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
- continue;
- }
-
- //
- // Found a ATA or ATAPI device, add it into the device list.
- //
- CreateNewDeviceInfo (Instance, Port, 0xFFFF, DeviceType, &Buffer);
- if (DeviceType == EfiIdeHarddisk) {
- REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE));
- AhciEnableDevSlp (
- PciIo,
- AhciRegisters,
- Port,
- 0,
- &Buffer
- );
- }
-
- //
- // Enable/disable PUIS according to policy setting if PUIS is capable (Word[83].BIT5 is set).
- //
- if ((Buffer.AtaData.command_set_supported_83 & BIT5) != 0) {
- Status = AhciPuisEnable (
- PciIo,
- AhciRegisters,
- Port,
- 0
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "PUIS enable/disable failed, Status = %r\n", Status));
- continue;
- }
- }
- }
- }
-
- return EFI_SUCCESS;
-}
+/** @file + The file for AHCI mode of ATA host controller. + + Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR> + (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include "AtaAtapiPassThru.h" + +/** + Read AHCI Operation register. + + @param PciIo The PCI IO protocol instance. + @param Offset The operation register offset. + + @return The register content read. + +**/ +UINT32 +EFIAPI +AhciReadReg ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT32 Offset + ) +{ + UINT32 Data; + + ASSERT (PciIo != NULL); + + Data = 0; + + PciIo->Mem.Read ( + PciIo, + EfiPciIoWidthUint32, + EFI_AHCI_BAR_INDEX, + (UINT64)Offset, + 1, + &Data + ); + + return Data; +} + +/** + Write AHCI Operation register. + + @param PciIo The PCI IO protocol instance. + @param Offset The operation register offset. + @param Data The data used to write down. + +**/ +VOID +EFIAPI +AhciWriteReg ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT32 Offset, + IN UINT32 Data + ) +{ + ASSERT (PciIo != NULL); + + PciIo->Mem.Write ( + PciIo, + EfiPciIoWidthUint32, + EFI_AHCI_BAR_INDEX, + (UINT64)Offset, + 1, + &Data + ); + + return; +} + +/** + Do AND operation with the value of AHCI Operation register. + + @param PciIo The PCI IO protocol instance. + @param Offset The operation register offset. + @param AndData The data used to do AND operation. + +**/ +VOID +EFIAPI +AhciAndReg ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT32 Offset, + IN UINT32 AndData + ) +{ + UINT32 Data; + + ASSERT (PciIo != NULL); + + Data = AhciReadReg (PciIo, Offset); + + Data &= AndData; + + AhciWriteReg (PciIo, Offset, Data); +} + +/** + Do OR operation with the value of AHCI Operation register. + + @param PciIo The PCI IO protocol instance. + @param Offset The operation register offset. + @param OrData The data used to do OR operation. + +**/ +VOID +EFIAPI +AhciOrReg ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT32 Offset, + IN UINT32 OrData + ) +{ + UINT32 Data; + + ASSERT (PciIo != NULL); + + Data = AhciReadReg (PciIo, Offset); + + Data |= OrData; + + AhciWriteReg (PciIo, Offset, Data); +} + +/** + Wait for the value of the specified MMIO register set to the test value. + + @param PciIo The PCI IO protocol instance. + @param Offset The MMIO address to test. + @param MaskValue The mask value of memory. + @param TestValue The test value of memory. + @param Timeout The time out value for wait memory set, uses 100ns as a unit. + + @retval EFI_TIMEOUT The MMIO setting is time out. + @retval EFI_SUCCESS The MMIO is correct set. + +**/ +EFI_STATUS +EFIAPI +AhciWaitMmioSet ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINTN Offset, + IN UINT32 MaskValue, + IN UINT32 TestValue, + IN UINT64 Timeout + ) +{ + UINT32 Value; + UINT64 Delay; + BOOLEAN InfiniteWait; + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + + do { + // + // Access PCI MMIO space to see if the value is the tested one. + // + Value = AhciReadReg (PciIo, (UINT32)Offset) & MaskValue; + + if (Value == TestValue) { + return EFI_SUCCESS; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + Wait for the value of the specified system memory set to the test value. + + @param Address The system memory address to test. + @param MaskValue The mask value of memory. + @param TestValue The test value of memory. + @param Timeout The time out value for wait memory set, uses 100ns as a unit. + + @retval EFI_TIMEOUT The system memory setting is time out. + @retval EFI_SUCCESS The system memory is correct set. + +**/ +EFI_STATUS +EFIAPI +AhciWaitMemSet ( + IN EFI_PHYSICAL_ADDRESS Address, + IN UINT32 MaskValue, + IN UINT32 TestValue, + IN UINT64 Timeout + ) +{ + UINT32 Value; + UINT64 Delay; + BOOLEAN InfiniteWait; + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + + do { + // + // Access system memory to see if the value is the tested one. + // + // The system memory pointed by Address will be updated by the + // SATA Host Controller, "volatile" is introduced to prevent + // compiler from optimizing the access to the memory address + // to only read once. + // + Value = *(volatile UINT32 *)(UINTN)Address; + Value &= MaskValue; + + if (Value == TestValue) { + return EFI_SUCCESS; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + Check the memory status to the test value. + + @param[in] Address The memory address to test. + @param[in] MaskValue The mask value of memory. + @param[in] TestValue The test value of memory. + + @retval EFI_NOT_READY The memory is not set. + @retval EFI_SUCCESS The memory is correct set. +**/ +EFI_STATUS +EFIAPI +AhciCheckMemSet ( + IN UINTN Address, + IN UINT32 MaskValue, + IN UINT32 TestValue + ) +{ + UINT32 Value; + + Value = *(volatile UINT32 *)Address; + Value &= MaskValue; + + if (Value == TestValue) { + return EFI_SUCCESS; + } + + return EFI_NOT_READY; +} + +/** + + Clear the port interrupt and error status. It will also clear + HBA interrupt status. + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + +**/ +VOID +EFIAPI +AhciClearPortStatus ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port + ) +{ + UINT32 Offset; + + // + // Clear any error status + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR; + AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset)); + + // + // Clear any port interrupt status + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS; + AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset)); + + // + // Clear any HBA interrupt status + // + AhciWriteReg (PciIo, EFI_AHCI_IS_OFFSET, AhciReadReg (PciIo, EFI_AHCI_IS_OFFSET)); +} + +/** + This function is used to dump the Status Registers and if there is ERR bit set + in the Status Register, the Error Register's value is also be dumped. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + +**/ +VOID +EFIAPI +AhciDumpPortStatus ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + UINTN Offset; + UINT32 Data; + UINTN FisBaseAddr; + EFI_STATUS Status; + + ASSERT (PciIo != NULL); + + if (AtaStatusBlock != NULL) { + ZeroMem (AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + + FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS); + Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET; + + Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H); + if (!EFI_ERROR (Status)) { + // + // If D2H FIS is received, update StatusBlock with its content. + // + CopyMem (AtaStatusBlock, (UINT8 *)Offset, sizeof (EFI_ATA_STATUS_BLOCK)); + } else { + // + // If D2H FIS is not received, only update Status & Error field through PxTFD + // as there is no other way to get the content of the Shadow Register Block. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + Data = AhciReadReg (PciIo, (UINT32)Offset); + + AtaStatusBlock->AtaStatus = (UINT8)Data; + if ((AtaStatusBlock->AtaStatus & BIT0) != 0) { + AtaStatusBlock->AtaError = (UINT8)(Data >> 8); + } + } + } +} + +/** + Enable the FIS running for giving port. + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param Timeout The timeout value of enabling FIS, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The FIS enable setting fails. + @retval EFI_TIMEOUT The FIS enable setting is time out. + @retval EFI_SUCCESS The FIS enable successfully. + +**/ +EFI_STATUS +EFIAPI +AhciEnableFisReceive ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT64 Timeout + ) +{ + UINT32 Offset; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE); + + return EFI_SUCCESS; +} + +/** + Disable the FIS running for giving port. + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param Timeout The timeout value of disabling FIS, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The FIS disable setting fails. + @retval EFI_TIMEOUT The FIS disable setting is time out. + @retval EFI_UNSUPPORTED The port is in running state. + @retval EFI_SUCCESS The FIS disable successfully. + +**/ +EFI_STATUS +EFIAPI +AhciDisableFisReceive ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT64 Timeout + ) +{ + UINT32 Offset; + UINT32 Data; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + Data = AhciReadReg (PciIo, Offset); + + // + // Before disabling Fis receive, the DMA engine of the port should NOT be in running status. + // + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) { + return EFI_UNSUPPORTED; + } + + // + // Check if the Fis receive DMA engine for the port is running. + // + if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) { + return EFI_SUCCESS; + } + + AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_FRE)); + + return AhciWaitMmioSet ( + PciIo, + Offset, + EFI_AHCI_PORT_CMD_FR, + 0, + Timeout + ); +} + +/** + Build the command list, command table and prepare the fis receiver. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The timeout value of stop. + @param CommandFis The control fis will be used for the transfer. + @param CommandList The command list will be used for the transfer. + @param AtapiCommand The atapi command will be used for the transfer. + @param AtapiCommandLength The length of the atapi command. + @param CommandSlotNumber The command slot will be used for the transfer. + @param DataPhysicalAddr The pointer to the data buffer pci bus master address. + @param DataLength The data count to be transferred. + +**/ +VOID +EFIAPI +AhciBuildCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_COMMAND_FIS *CommandFis, + IN EFI_AHCI_COMMAND_LIST *CommandList, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN UINT8 CommandSlotNumber, + IN OUT VOID *DataPhysicalAddr, + IN UINT32 DataLength + ) +{ + UINT64 BaseAddr; + UINT32 PrdtNumber; + UINT32 PrdtIndex; + UINTN RemainedData; + UINTN MemAddr; + DATA_64 Data64; + UINT32 Offset; + + // + // Filling the PRDT + // + PrdtNumber = (UINT32)DivU64x32 (((UINT64)DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1), EFI_AHCI_MAX_DATA_PER_PRDT); + + // + // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB data block. + // It also limits that the maximum amount of the PRDT entry in the command table + // is 65535. + // + ASSERT (PrdtNumber <= 65535); + + Data64.Uint64 = (UINTN)(AhciRegisters->AhciRFis) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port; + + BaseAddr = Data64.Uint64; + + ZeroMem ((VOID *)((UINTN)BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS)); + + ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE)); + + CommandFis->AhciCFisPmNum = PortMultiplier; + + CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS)); + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + if (AtapiCommand != NULL) { + CopyMem ( + &AhciRegisters->AhciCommandTable->AtapiCmd, + AtapiCommand, + AtapiCommandLength + ); + + CommandList->AhciCmdA = 1; + CommandList->AhciCmdP = 1; + + AhciOrReg (PciIo, Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI)); + } else { + AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI)); + } + + RemainedData = (UINTN)DataLength; + MemAddr = (UINTN)DataPhysicalAddr; + CommandList->AhciCmdPrdtl = PrdtNumber; + + for (PrdtIndex = 0; PrdtIndex < PrdtNumber; PrdtIndex++) { + if (RemainedData < EFI_AHCI_MAX_DATA_PER_PRDT) { + AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = (UINT32)RemainedData - 1; + } else { + AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbc = EFI_AHCI_MAX_DATA_PER_PRDT - 1; + } + + Data64.Uint64 = (UINT64)MemAddr; + AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDba = Data64.Uint32.Lower32; + AhciRegisters->AhciCommandTable->PrdtTable[PrdtIndex].AhciPrdtDbau = Data64.Uint32.Upper32; + RemainedData -= EFI_AHCI_MAX_DATA_PER_PRDT; + MemAddr += EFI_AHCI_MAX_DATA_PER_PRDT; + } + + // + // Set the last PRDT to Interrupt On Complete + // + if (PrdtNumber > 0) { + AhciRegisters->AhciCommandTable->PrdtTable[PrdtNumber - 1].AhciPrdtIoc = 1; + } + + CopyMem ( + (VOID *)((UINTN)AhciRegisters->AhciCmdList + (UINTN)CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)), + CommandList, + sizeof (EFI_AHCI_COMMAND_LIST) + ); + + Data64.Uint64 = (UINT64)(UINTN)AhciRegisters->AhciCommandTablePciAddr; + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32; + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32; + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier; +} + +/** + Build a command FIS. + + @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS data structure. + @param AtaCommandBlock A pointer to the AhciBuildCommandFis data structure. + +**/ +VOID +EFIAPI +AhciBuildCommandFis ( + IN OUT EFI_AHCI_COMMAND_FIS *CmdFis, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock + ) +{ + ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS)); + + CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D; + // + // Indicator it's a command + // + CmdFis->AhciCFisCmdInd = 0x1; + CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand; + + CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures; + CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp; + + CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber; + CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp; + + CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow; + CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp; + + CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh; + CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp; + + CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount; + CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp; + + CmdFis->AhciCFisDevHead = (UINT8)(AtaCommandBlock->AtaDeviceHead | 0xE0); +} + +/** + Wait until SATA device reports it is ready for operation. + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to reset. + + @retval EFI_SUCCESS Device ready for operation. + @retval EFI_TIMEOUT Device failed to get ready within required period. +**/ +EFI_STATUS +AhciWaitDeviceReady ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port + ) +{ + UINT32 PhyDetectDelay; + UINT32 Data; + UINT32 Offset; + + // + // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ + // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec. + // + PhyDetectDelay = 16 * 1000; + do { + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR; + if (AhciReadReg (PciIo, Offset) != 0) { + AhciWriteReg (PciIo, Offset, AhciReadReg (PciIo, Offset)); + } + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + + Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_TFD_MASK; + if (Data == 0) { + break; + } + + MicroSecondDelay (1000); + PhyDetectDelay--; + } while (PhyDetectDelay > 0); + + if (PhyDetectDelay == 0) { + DEBUG ((DEBUG_ERROR, "Port %d Device not ready (TFD=0x%X)\n", Port, Data)); + return EFI_TIMEOUT; + } else { + return EFI_SUCCESS; + } +} + +/** + Reset the SATA port. Algorithm follows AHCI spec 1.3.1 section 10.4.2 + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to reset. + + @retval EFI_SUCCESS Port reset. + @retval Others Failed to reset the port. +**/ +EFI_STATUS +AhciResetPort ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port + ) +{ + UINT32 Offset; + EFI_STATUS Status; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_DET_INIT); + // + // SW is required to keep DET set to 0x1 at least for 1 milisecond to ensure that + // at least one COMRESET signal is sent. + // + MicroSecondDelay (1000); + AhciAndReg (PciIo, Offset, ~(UINT32)EFI_AHCI_PORT_SSTS_DET_MASK); + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS; + Status = AhciWaitMmioSet (PciIo, Offset, EFI_AHCI_PORT_SSTS_DET_MASK, EFI_AHCI_PORT_SSTS_DET_PCE, ATA_ATAPI_TIMEOUT); + if (EFI_ERROR (Status)) { + return Status; + } + + return AhciWaitDeviceReady (PciIo, Port); +} + +/** + Recovers the SATA port from error condition. + This function implements algorithm described in + AHCI spec 1.3.1 section 6.2.2 + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to check. + + @retval EFI_SUCCESS Port recovered. + @retval Others Failed to recover port. +**/ +EFI_STATUS +AhciRecoverPortError ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port + ) +{ + UINT32 Offset; + UINT32 PortInterrupt; + UINT32 PortTfd; + EFI_STATUS Status; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS; + PortInterrupt = AhciReadReg (PciIo, Offset); + if ((PortInterrupt & EFI_AHCI_PORT_IS_FATAL_ERROR_MASK) == 0) { + // + // No fatal error detected. Exit with success as port should still be operational. + // No need to clear IS as it will be cleared when the next command starts. + // + return EFI_SUCCESS; + } + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciAndReg (PciIo, Offset, ~(UINT32)EFI_AHCI_PORT_CMD_ST); + + Status = AhciWaitMmioSet (PciIo, Offset, EFI_AHCI_PORT_CMD_CR, 0, ATA_ATAPI_TIMEOUT); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Ahci port %d is in hung state, aborting recovery\n", Port)); + return Status; + } + + // + // If TFD.BSY or TFD.DRQ is still set it means that drive is hung and software has + // to reset it before sending any additional commands. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + PortTfd = AhciReadReg (PciIo, Offset); + if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) { + Status = AhciResetPort (PciIo, Port); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Failed to reset the port %d\n", Port)); + return EFI_DEVICE_ERROR; + } + } + + return EFI_SUCCESS; +} + +/** + This function will check if the failed command should be retired. Only error + conditions which are a result of transient conditions on a link(either to system or to device). + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to check. + + @retval TRUE Command failure was caused by transient condition and should be retried + @retval FALSE Command should not be retried +**/ +BOOLEAN +AhciShouldCmdBeRetried ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port + ) +{ + UINT32 Offset; + UINT32 PortInterrupt; + UINT32 Serr; + UINT32 Tfd; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS; + PortInterrupt = AhciReadReg (PciIo, Offset); + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR; + Serr = AhciReadReg (PciIo, Offset); + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + Tfd = AhciReadReg (PciIo, Offset); + + // + // This can occur if there was a CRC error on a path from system memory to + // host controller. + // + if (PortInterrupt & EFI_AHCI_PORT_IS_HBDS) { + return TRUE; + // + // This can occur if there was a CRC error detected by host during communication + // with the device + // + } else if ((PortInterrupt & (EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_INFS)) && + (Serr & EFI_AHCI_PORT_SERR_CRCE)) + { + return TRUE; + // + // This can occur if there was a CRC error detected by device during communication + // with the host. Device returns error status to host with D2H FIS. + // + } else if ((PortInterrupt & EFI_AHCI_PORT_IS_TFES) && + (Tfd & EFI_AHCI_PORT_TFD_ERR_INT_CRC)) + { + return TRUE; + } + + return FALSE; +} + +/** + Checks if specified FIS has been received. + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to check. + @param[in] FisType FIS type for which to check. + + @retval EFI_SUCCESS FIS received. + @retval EFI_NOT_READY FIS not received yet. + @retval EFI_DEVICE_ERROR AHCI controller reported an error on port. +**/ +EFI_STATUS +AhciCheckFisReceived ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN SATA_FIS_TYPE FisType + ) +{ + UINT32 Offset; + UINT32 PortInterrupt; + UINT32 PortTfd; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS; + PortInterrupt = AhciReadReg (PciIo, Offset); + if ((PortInterrupt & EFI_AHCI_PORT_IS_ERROR_MASK) != 0) { + DEBUG ((DEBUG_ERROR, "AHCI: Error interrupt reported PxIS: %X\n", PortInterrupt)); + return EFI_DEVICE_ERROR; + } + + // + // For PIO setup FIS - According to SATA 2.6 spec section 11.7, D2h FIS means an error encountered. + // But Qemu and Marvel 9230 sata controller may just receive a D2h FIS from device + // after the transaction is finished successfully. + // To get better device compatibilities, we further check if the PxTFD's ERR bit is set. + // By this way, we can know if there is a real error happened. + // + if (((FisType == SataFisD2H) && ((PortInterrupt & EFI_AHCI_PORT_IS_DHRS) != 0)) || + ((FisType == SataFisPioSetup) && ((PortInterrupt & (EFI_AHCI_PORT_IS_PSS | EFI_AHCI_PORT_IS_DHRS)) != 0)) || + ((FisType == SataFisDmaSetup) && ((PortInterrupt & (EFI_AHCI_PORT_IS_DSS | EFI_AHCI_PORT_IS_DHRS)) != 0))) + { + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + PortTfd = AhciReadReg (PciIo, (UINT32)Offset); + if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) { + return EFI_DEVICE_ERROR; + } else { + return EFI_SUCCESS; + } + } + + return EFI_NOT_READY; +} + +/** + Waits until specified FIS has been received. + + @param[in] PciIo Pointer to AHCI controller PciIo. + @param[in] Port SATA port index on which to check. + @param[in] Timeout Time after which function should stop polling. + @param[in] FisType FIS type for which to check. + + @retval EFI_SUCCESS FIS received. + @retval EFI_TIMEOUT FIS failed to arrive within a specified time period. + @retval EFI_DEVICE_ERROR AHCI controller reported an error on port. +**/ +EFI_STATUS +AhciWaitUntilFisReceived ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT64 Timeout, + IN SATA_FIS_TYPE FisType + ) +{ + EFI_STATUS Status; + BOOLEAN InfiniteWait; + UINT64 Delay; + + Delay = DivU64x32 (Timeout, 1000) + 1; + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + do { + Status = AhciCheckFisReceived (PciIo, Port, FisType); + if (Status != EFI_NOT_READY) { + return Status; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + Prints contents of the ATA command block into the debug port. + + @param[in] AtaCommandBlock AtaCommandBlock to print. + @param[in] DebugLevel Debug level on which to print. +**/ +VOID +AhciPrintCommandBlock ( + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN UINT32 DebugLevel + ) +{ + DEBUG ((DebugLevel, "ATA COMMAND BLOCK:\n")); + DEBUG ((DebugLevel, "AtaCommand: %d\n", AtaCommandBlock->AtaCommand)); + DEBUG ((DebugLevel, "AtaFeatures: %X\n", AtaCommandBlock->AtaFeatures)); + DEBUG ((DebugLevel, "AtaSectorNumber: %d\n", AtaCommandBlock->AtaSectorNumber)); + DEBUG ((DebugLevel, "AtaCylinderLow: %X\n", AtaCommandBlock->AtaCylinderHigh)); + DEBUG ((DebugLevel, "AtaCylinderHigh: %X\n", AtaCommandBlock->AtaCylinderHigh)); + DEBUG ((DebugLevel, "AtaDeviceHead: %d\n", AtaCommandBlock->AtaDeviceHead)); + DEBUG ((DebugLevel, "AtaSectorNumberExp: %d\n", AtaCommandBlock->AtaSectorNumberExp)); + DEBUG ((DebugLevel, "AtaCylinderLowExp: %X\n", AtaCommandBlock->AtaCylinderLowExp)); + DEBUG ((DebugLevel, "AtaCylinderHighExp: %X\n", AtaCommandBlock->AtaCylinderHighExp)); + DEBUG ((DebugLevel, "AtaFeaturesExp: %X\n", AtaCommandBlock->AtaFeaturesExp)); + DEBUG ((DebugLevel, "AtaSectorCount: %d\n", AtaCommandBlock->AtaSectorCount)); + DEBUG ((DebugLevel, "AtaSectorCountExp: %d\n", AtaCommandBlock->AtaSectorCountExp)); +} + +/** + Prints contents of the ATA status block into the debug port. + + @param[in] AtaStatusBlock AtaStatusBlock to print. + @param[in] DebugLevel Debug level on which to print. +**/ +VOID +AhciPrintStatusBlock ( + IN EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT32 DebugLevel + ) +{ + // + // Skip NULL pointer + // + if (AtaStatusBlock == NULL) { + return; + } + + // + // Only print status and error since we have all of the rest printed as + // a part of command block print. + // + DEBUG ((DebugLevel, "ATA STATUS BLOCK:\n")); + DEBUG ((DebugLevel, "AtaStatus: %d\n", AtaStatusBlock->AtaStatus)); + DEBUG ((DebugLevel, "AtaError: %d\n", AtaStatusBlock->AtaError)); +} + +/** + Start a PIO data transfer on specific port. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] Read The transfer direction. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in, out] MemoryAddr The pointer to the data buffer. + @param[in] DataCount The data count to be transferred. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The PIO data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciPioTransfer ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN OUT VOID *MemoryAddr, + IN UINT32 DataCount, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + EFI_STATUS Status; + EFI_PHYSICAL_ADDRESS PhyAddr; + VOID *Map; + UINTN MapLength; + EFI_PCI_IO_PROTOCOL_OPERATION Flag; + EFI_AHCI_COMMAND_FIS CFis; + EFI_AHCI_COMMAND_LIST CmdList; + UINT32 PrdCount; + UINT32 Retry; + EFI_STATUS RecoveryStatus; + BOOLEAN DoRetry; + + if (Read) { + Flag = EfiPciIoOperationBusMasterWrite; + } else { + Flag = EfiPciIoOperationBusMasterRead; + } + + // + // construct command list and command table with pci bus address + // + MapLength = DataCount; + Status = PciIo->Map ( + PciIo, + Flag, + MemoryAddr, + &MapLength, + &PhyAddr, + &Map + ); + + if (EFI_ERROR (Status) || (DataCount != MapLength)) { + return EFI_BAD_BUFFER_SIZE; + } + + // + // Package read needed + // + AhciBuildCommandFis (&CFis, AtaCommandBlock); + + ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST)); + + CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4; + CmdList.AhciCmdW = Read ? 0 : 1; + + for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) { + AhciBuildCommand ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + &CFis, + &CmdList, + AtapiCommand, + AtapiCommandLength, + 0, + (VOID *)(UINTN)PhyAddr, + DataCount + ); + + DEBUG ((DEBUG_VERBOSE, "Starting command for PIO transfer:\n")); + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE); + Status = AhciStartCommand ( + PciIo, + Port, + 0, + Timeout + ); + if (EFI_ERROR (Status)) { + break; + } + + if (Read && (AtapiCommand == 0)) { + Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisPioSetup); + if (Status == EFI_SUCCESS) { + PrdCount = *(volatile UINT32 *)(&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc)); + if (PrdCount == DataCount) { + Status = EFI_SUCCESS; + } else { + Status = EFI_DEVICE_ERROR; + } + } + } else { + Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H); + } + + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "PIO command failed at retry %d\n", Retry)); + DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // needs to be called before error recovery + RecoveryStatus = AhciRecoverPortError (PciIo, Port); + if (!DoRetry || EFI_ERROR (RecoveryStatus)) { + break; + } + } else { + break; + } + } + + AhciStopCommand ( + PciIo, + Port, + Timeout + ); + + AhciDisableFisReceive ( + PciIo, + Port, + Timeout + ); + + PciIo->Unmap ( + PciIo, + Map + ); + + AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock); + + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "Failed to execute command for PIO transfer:\n")); + // + // Repeat command block here to make sure it is printed on + // device error debug level. + // + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR); + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR); + } else { + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE); + } + + return Status; +} + +/** + Start a DMA data transfer on specific port + + @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] Read The transfer direction. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in, out] MemoryAddr The pointer to the data buffer. + @param[in] DataCount The data count to be transferred. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The DMA data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciDmaTransfer ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN OUT VOID *MemoryAddr, + IN UINT32 DataCount, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + EFI_STATUS Status; + EFI_PHYSICAL_ADDRESS PhyAddr; + VOID *Map; + UINTN MapLength; + EFI_PCI_IO_PROTOCOL_OPERATION Flag; + EFI_AHCI_COMMAND_FIS CFis; + EFI_AHCI_COMMAND_LIST CmdList; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_TPL OldTpl; + UINT32 Retry; + EFI_STATUS RecoveryStatus; + BOOLEAN DoRetry; + + Map = NULL; + PciIo = Instance->PciIo; + + if (PciIo == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Set Status to suppress incorrect compiler/analyzer warnings + // + Status = EFI_SUCCESS; + + // + // DMA buffer allocation. Needs to be done only once for both sync and async + // DMA transfers irrespective of number of retries. + // + if ((Task == NULL) || ((Task != NULL) && (Task->Map == NULL))) { + if (Read) { + Flag = EfiPciIoOperationBusMasterWrite; + } else { + Flag = EfiPciIoOperationBusMasterRead; + } + + MapLength = DataCount; + Status = PciIo->Map ( + PciIo, + Flag, + MemoryAddr, + &MapLength, + &PhyAddr, + &Map + ); + + if (EFI_ERROR (Status) || (DataCount != MapLength)) { + return EFI_BAD_BUFFER_SIZE; + } + + if (Task != NULL) { + Task->Map = Map; + } + } + + if ((Task == NULL) || ((Task != NULL) && !Task->IsStart)) { + AhciBuildCommandFis (&CFis, AtaCommandBlock); + + ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST)); + + CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4; + CmdList.AhciCmdW = Read ? 0 : 1; + } + + if (Task == NULL) { + // + // Before starting the Blocking BlockIO operation, push to finish all non-blocking + // BlockIO tasks. + // Delay 100us to simulate the blocking time out checking. + // + OldTpl = gBS->RaiseTPL (TPL_NOTIFY); + while (!IsListEmpty (&Instance->NonBlockingTaskList)) { + AsyncNonBlockingTransferRoutine (NULL, Instance); + // + // Stall for 100us. + // + MicroSecondDelay (100); + } + + gBS->RestoreTPL (OldTpl); + for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) { + AhciBuildCommand ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + &CFis, + &CmdList, + AtapiCommand, + AtapiCommandLength, + 0, + (VOID *)(UINTN)PhyAddr, + DataCount + ); + + DEBUG ((DEBUG_VERBOSE, "Starting command for sync DMA transfer:\n")); + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE); + Status = AhciStartCommand ( + PciIo, + Port, + 0, + Timeout + ); + if (EFI_ERROR (Status)) { + break; + } + + Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H); + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "DMA command failed at retry: %d\n", Retry)); + DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // needs to be called before error recovery + RecoveryStatus = AhciRecoverPortError (PciIo, Port); + if (!DoRetry || EFI_ERROR (RecoveryStatus)) { + break; + } + } else { + break; + } + } + } else { + if (!Task->IsStart) { + AhciBuildCommand ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + &CFis, + &CmdList, + AtapiCommand, + AtapiCommandLength, + 0, + (VOID *)(UINTN)PhyAddr, + DataCount + ); + + DEBUG ((DEBUG_VERBOSE, "Starting command for async DMA transfer:\n")); + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE); + Status = AhciStartCommand ( + PciIo, + Port, + 0, + Timeout + ); + if (!EFI_ERROR (Status)) { + Task->IsStart = TRUE; + } + } + + if (Task->IsStart) { + Status = AhciCheckFisReceived (PciIo, Port, SataFisD2H); + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "DMA command failed at retry: %d\n", Task->RetryTimes)); + DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // call this before error recovery + RecoveryStatus = AhciRecoverPortError (PciIo, Port); + // + // If recovery passed mark the Task as not started and change the status + // to EFI_NOT_READY. This will make the higher level call this function again + // and on next call the command will be re-issued due to IsStart being FALSE. + // This also makes the next condition decrement the RetryTimes. + // + if (DoRetry && (RecoveryStatus == EFI_SUCCESS)) { + Task->IsStart = FALSE; + Status = EFI_NOT_READY; + } + } + + if (Status == EFI_NOT_READY) { + if (!Task->InfiniteWait && (Task->RetryTimes == 0)) { + Status = EFI_TIMEOUT; + } else { + Task->RetryTimes--; + } + } + } + } + + // + // For Blocking mode, the command should be stopped, the Fis should be disabled + // and the PciIo should be unmapped. + // For non-blocking mode, only when a error is happened (if the return status is + // EFI_NOT_READY that means the command doesn't finished, try again.), first do the + // context cleanup, then set the packet's Asb status. + // + if ((Task == NULL) || + ((Task != NULL) && (Status != EFI_NOT_READY)) + ) + { + AhciStopCommand ( + PciIo, + Port, + Timeout + ); + + AhciDisableFisReceive ( + PciIo, + Port, + Timeout + ); + + PciIo->Unmap ( + PciIo, + (Task != NULL) ? Task->Map : Map + ); + + if (Task != NULL) { + Task->Packet->Asb->AtaStatus = 0x01; + } + } + + AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock); + + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "Failed to execute command for DMA transfer:\n")); + // + // Repeat command block here to make sure it is printed on + // device error debug level. + // + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR); + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR); + } else { + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE); + } + + return Status; +} + +/** + Start a non data transfer on specific port. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The non data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciNonDataTransfer ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + EFI_STATUS Status; + EFI_AHCI_COMMAND_FIS CFis; + EFI_AHCI_COMMAND_LIST CmdList; + UINT32 Retry; + EFI_STATUS RecoveryStatus; + BOOLEAN DoRetry; + + // + // Package read needed + // + AhciBuildCommandFis (&CFis, AtaCommandBlock); + + ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST)); + + CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4; + + for (Retry = 0; Retry < AHCI_COMMAND_RETRIES; Retry++) { + AhciBuildCommand ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + &CFis, + &CmdList, + AtapiCommand, + AtapiCommandLength, + 0, + NULL, + 0 + ); + + DEBUG ((DEBUG_VERBOSE, "Starting command for non data transfer:\n")); + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_VERBOSE); + Status = AhciStartCommand ( + PciIo, + Port, + 0, + Timeout + ); + if (EFI_ERROR (Status)) { + break; + } + + Status = AhciWaitUntilFisReceived (PciIo, Port, Timeout, SataFisD2H); + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "Non data transfer failed at retry %d\n", Retry)); + DoRetry = AhciShouldCmdBeRetried (PciIo, Port); // call this before error recovery + RecoveryStatus = AhciRecoverPortError (PciIo, Port); + if (!DoRetry || EFI_ERROR (RecoveryStatus)) { + break; + } + } else { + break; + } + } + + AhciStopCommand ( + PciIo, + Port, + Timeout + ); + + AhciDisableFisReceive ( + PciIo, + Port, + Timeout + ); + + AhciDumpPortStatus (PciIo, AhciRegisters, Port, AtaStatusBlock); + + if (Status == EFI_DEVICE_ERROR) { + DEBUG ((DEBUG_ERROR, "Failed to execute command for non data transfer:\n")); + // + // Repeat command block here to make sure it is printed on + // device error debug level. + // + AhciPrintCommandBlock (AtaCommandBlock, DEBUG_ERROR); + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_ERROR); + } else { + AhciPrintStatusBlock (AtaStatusBlock, DEBUG_VERBOSE); + } + + return Status; +} + +/** + Stop command running for giving port + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param Timeout The timeout value of stop, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The command stop unsuccessfully. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_SUCCESS The command stop successfully. + +**/ +EFI_STATUS +EFIAPI +AhciStopCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT64 Timeout + ) +{ + UINT32 Offset; + UINT32 Data; + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + Data = AhciReadReg (PciIo, Offset); + + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) { + return EFI_SUCCESS; + } + + if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) { + AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_ST)); + } + + return AhciWaitMmioSet ( + PciIo, + Offset, + EFI_AHCI_PORT_CMD_CR, + 0, + Timeout + ); +} + +/** + Start command for give slot on specific port. + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param CommandSlot The number of Command Slot. + @param Timeout The timeout value of start, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The command start unsuccessfully. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_SUCCESS The command start successfully. + +**/ +EFI_STATUS +EFIAPI +AhciStartCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT8 CommandSlot, + IN UINT64 Timeout + ) +{ + UINT32 CmdSlotBit; + EFI_STATUS Status; + UINT32 PortStatus; + UINT32 StartCmd; + UINT32 PortTfd; + UINT32 Offset; + UINT32 Capability; + + // + // Collect AHCI controller information + // + Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET); + + CmdSlotBit = (UINT32)(1 << CommandSlot); + + AhciClearPortStatus ( + PciIo, + Port + ); + + Status = AhciEnableFisReceive ( + PciIo, + Port, + Timeout + ); + + if (EFI_ERROR (Status)) { + return Status; + } + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + PortStatus = AhciReadReg (PciIo, Offset); + + StartCmd = 0; + if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) { + StartCmd = AhciReadReg (PciIo, Offset); + StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK; + StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE; + } + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD; + PortTfd = AhciReadReg (PciIo, Offset); + + if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) { + if ((Capability & BIT24) != 0) { + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_CLO); + + AhciWaitMmioSet ( + PciIo, + Offset, + EFI_AHCI_PORT_CMD_CLO, + 0, + Timeout + ); + } + } + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd); + + // + // Setting the command + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI; + AhciAndReg (PciIo, Offset, 0); + AhciOrReg (PciIo, Offset, CmdSlotBit); + + return EFI_SUCCESS; +} + +/** + Do AHCI HBA reset. + + @param PciIo The PCI IO protocol instance. + @param Timeout The timeout value of reset, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset. + @retval EFI_TIMEOUT The reset operation is time out. + @retval EFI_SUCCESS AHCI controller is reset successfully. + +**/ +EFI_STATUS +EFIAPI +AhciReset ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT32 Value; + + // + // Make sure that GHC.AE bit is set before accessing any AHCI registers. + // + Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET); + + if ((Value & EFI_AHCI_GHC_ENABLE) == 0) { + AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE); + } + + AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET); + + Delay = DivU64x32 (Timeout, 1000) + 1; + + do { + Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET); + + if ((Value & EFI_AHCI_GHC_RESET) == 0) { + break; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (Delay > 0); + + if (Delay == 0) { + return EFI_TIMEOUT; + } + + return EFI_SUCCESS; +} + +/** + Send SMART Return Status command to check if the execution of SMART cmd is successful or not. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The port multiplier port number. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution. + @retval Others Fail to get return status data. + +**/ +EFI_STATUS +EFIAPI +AhciAtaSmartReturnStatusCheck ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + UINT8 LBAMid; + UINT8 LBAHigh; + UINTN FisBaseAddr; + UINT32 Value; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + + // + // Send S.M.A.R.T Read Return Status command to device + // + Status = AhciNonDataTransfer ( + PciIo, + AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplier, + NULL, + 0, + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (EFI_ERROR (Status)) { + REPORT_STATUS_CODE ( + EFI_ERROR_CODE | EFI_ERROR_MINOR, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED) + ); + return EFI_DEVICE_ERROR; + } + + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE) + ); + + FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS); + + Value = *(UINT32 *)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET); + + if ((Value & EFI_AHCI_FIS_TYPE_MASK) == EFI_AHCI_FIS_REGISTER_D2H) { + LBAMid = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[5]; + LBAHigh = ((UINT8 *)(UINTN)(FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET))[6]; + + if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) { + // + // The threshold exceeded condition is not detected by the device + // + DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n")); + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD) + ); + } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) { + // + // The threshold exceeded condition is detected by the device + // + DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n")); + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD) + ); + } + } + + return EFI_SUCCESS; +} + +/** + Enable SMART command of the disk if supported. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The port multiplier port number. + @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + +**/ +VOID +EFIAPI +AhciAtaSmartSupport ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_IDENTIFY_DATA *IdentifyData, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + // + // Detect if the device supports S.M.A.R.T. + // + if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) { + // + // S.M.A.R.T is not supported by the device + // + DEBUG (( + DEBUG_INFO, + "S.M.A.R.T feature is not supported at port [%d] PortMultiplier [%d]!\n", + Port, + PortMultiplier + )); + REPORT_STATUS_CODE ( + EFI_ERROR_CODE | EFI_ERROR_MINOR, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED) + ); + } else { + // + // Check if the feature is enabled. If not, then enable S.M.A.R.T. + // + if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) { + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE) + ); + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + + // + // Send S.M.A.R.T Enable command to device + // + Status = AhciNonDataTransfer ( + PciIo, + AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplier, + NULL, + 0, + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (!EFI_ERROR (Status)) { + // + // Send S.M.A.R.T AutoSave command to device + // + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = 0xD2; + AtaCommandBlock.AtaSectorCount = 0xF1; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + + Status = AhciNonDataTransfer ( + PciIo, + AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplier, + NULL, + 0, + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + } + } + + AhciAtaSmartReturnStatusCheck ( + PciIo, + AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplier, + AtaStatusBlock + ); + + DEBUG (( + DEBUG_INFO, + "Enabled S.M.A.R.T feature at port [%d] PortMultiplier [%d]!\n", + Port, + PortMultiplier + )); + } + + return; +} + +/** + Send Buffer cmd to specific device. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The port multiplier port number. + @param Buffer The data buffer to store IDENTIFY PACKET data. + + @retval EFI_DEVICE_ERROR The cmd abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for executing. + @retval EFI_SUCCESS The cmd executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciIdentify ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN OUT EFI_IDENTIFY_DATA *Buffer + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + + if ((PciIo == NULL) || (AhciRegisters == NULL) || (Buffer == NULL)) { + return EFI_INVALID_PARAMETER; + } + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE; + AtaCommandBlock.AtaSectorCount = 1; + + Status = AhciPioTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + NULL, + 0, + TRUE, + &AtaCommandBlock, + &AtaStatusBlock, + Buffer, + sizeof (EFI_IDENTIFY_DATA), + ATA_ATAPI_TIMEOUT, + NULL + ); + + return Status; +} + +/** + Send Buffer cmd to specific device. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The port multiplier port number. + @param Buffer The data buffer to store IDENTIFY PACKET data. + + @retval EFI_DEVICE_ERROR The cmd abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for executing. + @retval EFI_SUCCESS The cmd executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciIdentifyPacket ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN OUT EFI_IDENTIFY_DATA *Buffer + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + + if ((PciIo == NULL) || (AhciRegisters == NULL)) { + return EFI_INVALID_PARAMETER; + } + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE; + AtaCommandBlock.AtaSectorCount = 1; + + Status = AhciPioTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + NULL, + 0, + TRUE, + &AtaCommandBlock, + &AtaStatusBlock, + Buffer, + sizeof (EFI_IDENTIFY_DATA), + ATA_ATAPI_TIMEOUT, + NULL + ); + + return Status; +} + +/** + Send SET FEATURE cmd on specific device. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The port multiplier port number. + @param Feature The data to send Feature register. + @param FeatureSpecificData The specific data for SET FEATURE cmd. + @param Timeout The timeout value of SET FEATURE cmd, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The cmd abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for executing. + @retval EFI_SUCCESS The cmd executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciDeviceSetFeature ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN UINT16 Feature, + IN UINT32 FeatureSpecificData, + IN UINT64 Timeout + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES; + AtaCommandBlock.AtaFeatures = (UINT8)Feature; + AtaCommandBlock.AtaFeaturesExp = (UINT8)(Feature >> 8); + AtaCommandBlock.AtaSectorCount = (UINT8)FeatureSpecificData; + AtaCommandBlock.AtaSectorNumber = (UINT8)(FeatureSpecificData >> 8); + AtaCommandBlock.AtaCylinderLow = (UINT8)(FeatureSpecificData >> 16); + AtaCommandBlock.AtaCylinderHigh = (UINT8)(FeatureSpecificData >> 24); + + Status = AhciNonDataTransfer ( + PciIo, + AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplier, + NULL, + 0, + &AtaCommandBlock, + &AtaStatusBlock, + Timeout, + NULL + ); + + return Status; +} + +/** + This function is used to send out ATAPI commands conforms to the Packet Command + with PIO Protocol. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The number of port multiplier. + @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure. + + @retval EFI_SUCCESS send out the ATAPI packet command successfully + and device sends data successfully. + @retval EFI_DEVICE_ERROR the device failed to send data. + +**/ +EFI_STATUS +EFIAPI +AhciPacketCommandExecute ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet + ) +{ + EFI_STATUS Status; + VOID *Buffer; + UINT32 Length; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + BOOLEAN Read; + + if ((Packet == NULL) || (Packet->Cdb == NULL)) { + return EFI_INVALID_PARAMETER; + } + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + AtaCommandBlock.AtaCommand = ATA_CMD_PACKET; + // + // No OVL; No DMA + // + AtaCommandBlock.AtaFeatures = 0x00; + // + // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device + // determine how many data should be transferred. + // + AtaCommandBlock.AtaCylinderLow = (UINT8)(ATAPI_MAX_BYTE_COUNT & 0x00ff); + AtaCommandBlock.AtaCylinderHigh = (UINT8)(ATAPI_MAX_BYTE_COUNT >> 8); + + if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) { + Buffer = Packet->InDataBuffer; + Length = Packet->InTransferLength; + Read = TRUE; + } else { + Buffer = Packet->OutDataBuffer; + Length = Packet->OutTransferLength; + Read = FALSE; + } + + if (Length == 0) { + Status = AhciNonDataTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + Packet->Cdb, + Packet->CdbLength, + &AtaCommandBlock, + &AtaStatusBlock, + Packet->Timeout, + NULL + ); + } else { + Status = AhciPioTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + Packet->Cdb, + Packet->CdbLength, + Read, + &AtaCommandBlock, + &AtaStatusBlock, + Buffer, + Length, + Packet->Timeout, + NULL + ); + } + + return Status; +} + +/** + Allocate transfer-related data struct which is used at AHCI mode. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + +**/ +EFI_STATUS +EFIAPI +AhciCreateTransferDescriptor ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN OUT EFI_AHCI_REGISTERS *AhciRegisters + ) +{ + EFI_STATUS Status; + UINTN Bytes; + VOID *Buffer; + + UINT32 Capability; + UINT32 PortImplementBitMap; + UINT8 MaxPortNumber; + UINT8 MaxCommandSlotNumber; + BOOLEAN Support64Bit; + UINT64 MaxReceiveFisSize; + UINT64 MaxCommandListSize; + UINT64 MaxCommandTableSize; + EFI_PHYSICAL_ADDRESS AhciRFisPciAddr; + EFI_PHYSICAL_ADDRESS AhciCmdListPciAddr; + EFI_PHYSICAL_ADDRESS AhciCommandTablePciAddr; + + Buffer = NULL; + // + // Collect AHCI controller information + // + Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET); + // + // Get the number of command slots per port supported by this HBA. + // + MaxCommandSlotNumber = (UINT8)(((Capability & 0x1F00) >> 8) + 1); + Support64Bit = (BOOLEAN)(((Capability & BIT31) != 0) ? TRUE : FALSE); + + PortImplementBitMap = AhciReadReg (PciIo, EFI_AHCI_PI_OFFSET); + // + // Get the highest bit of implemented ports which decides how many bytes are allocated for received FIS. + // + MaxPortNumber = (UINT8)(UINTN)(HighBitSet32 (PortImplementBitMap) + 1); + if (MaxPortNumber == 0) { + return EFI_DEVICE_ERROR; + } + + MaxReceiveFisSize = MaxPortNumber * sizeof (EFI_AHCI_RECEIVED_FIS); + Status = PciIo->AllocateBuffer ( + PciIo, + AllocateAnyPages, + EfiBootServicesData, + EFI_SIZE_TO_PAGES ((UINTN)MaxReceiveFisSize), + &Buffer, + 0 + ); + + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + + ZeroMem (Buffer, (UINTN)MaxReceiveFisSize); + + AhciRegisters->AhciRFis = Buffer; + AhciRegisters->MaxReceiveFisSize = MaxReceiveFisSize; + Bytes = (UINTN)MaxReceiveFisSize; + + Status = PciIo->Map ( + PciIo, + EfiPciIoOperationBusMasterCommonBuffer, + Buffer, + &Bytes, + &AhciRFisPciAddr, + &AhciRegisters->MapRFis + ); + + if (EFI_ERROR (Status) || (Bytes != MaxReceiveFisSize)) { + // + // Map error or unable to map the whole RFis buffer into a contiguous region. + // + Status = EFI_OUT_OF_RESOURCES; + goto Error6; + } + + if ((!Support64Bit) && (AhciRFisPciAddr > 0x100000000ULL)) { + // + // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address. + // + Status = EFI_DEVICE_ERROR; + goto Error5; + } + + AhciRegisters->AhciRFisPciAddr = (EFI_AHCI_RECEIVED_FIS *)(UINTN)AhciRFisPciAddr; + + // + // Allocate memory for command list + // Note that the implementation is a single task model which only use a command list for all ports. + // + Buffer = NULL; + MaxCommandListSize = MaxCommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST); + Status = PciIo->AllocateBuffer ( + PciIo, + AllocateAnyPages, + EfiBootServicesData, + EFI_SIZE_TO_PAGES ((UINTN)MaxCommandListSize), + &Buffer, + 0 + ); + + if (EFI_ERROR (Status)) { + // + // Free mapped resource. + // + Status = EFI_OUT_OF_RESOURCES; + goto Error5; + } + + ZeroMem (Buffer, (UINTN)MaxCommandListSize); + + AhciRegisters->AhciCmdList = Buffer; + AhciRegisters->MaxCommandListSize = MaxCommandListSize; + Bytes = (UINTN)MaxCommandListSize; + + Status = PciIo->Map ( + PciIo, + EfiPciIoOperationBusMasterCommonBuffer, + Buffer, + &Bytes, + &AhciCmdListPciAddr, + &AhciRegisters->MapCmdList + ); + + if (EFI_ERROR (Status) || (Bytes != MaxCommandListSize)) { + // + // Map error or unable to map the whole cmd list buffer into a contiguous region. + // + Status = EFI_OUT_OF_RESOURCES; + goto Error4; + } + + if ((!Support64Bit) && (AhciCmdListPciAddr > 0x100000000ULL)) { + // + // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address. + // + Status = EFI_DEVICE_ERROR; + goto Error3; + } + + AhciRegisters->AhciCmdListPciAddr = (EFI_AHCI_COMMAND_LIST *)(UINTN)AhciCmdListPciAddr; + + // + // Allocate memory for command table + // According to AHCI 1.3 spec, a PRD table can contain maximum 65535 entries. + // + Buffer = NULL; + MaxCommandTableSize = sizeof (EFI_AHCI_COMMAND_TABLE); + + Status = PciIo->AllocateBuffer ( + PciIo, + AllocateAnyPages, + EfiBootServicesData, + EFI_SIZE_TO_PAGES ((UINTN)MaxCommandTableSize), + &Buffer, + 0 + ); + + if (EFI_ERROR (Status)) { + // + // Free mapped resource. + // + Status = EFI_OUT_OF_RESOURCES; + goto Error3; + } + + ZeroMem (Buffer, (UINTN)MaxCommandTableSize); + + AhciRegisters->AhciCommandTable = Buffer; + AhciRegisters->MaxCommandTableSize = MaxCommandTableSize; + Bytes = (UINTN)MaxCommandTableSize; + + Status = PciIo->Map ( + PciIo, + EfiPciIoOperationBusMasterCommonBuffer, + Buffer, + &Bytes, + &AhciCommandTablePciAddr, + &AhciRegisters->MapCommandTable + ); + + if (EFI_ERROR (Status) || (Bytes != MaxCommandTableSize)) { + // + // Map error or unable to map the whole cmd list buffer into a contiguous region. + // + Status = EFI_OUT_OF_RESOURCES; + goto Error2; + } + + if ((!Support64Bit) && (AhciCommandTablePciAddr > 0x100000000ULL)) { + // + // The AHCI HBA doesn't support 64bit addressing, so should not get a >4G pci bus master address. + // + Status = EFI_DEVICE_ERROR; + goto Error1; + } + + AhciRegisters->AhciCommandTablePciAddr = (EFI_AHCI_COMMAND_TABLE *)(UINTN)AhciCommandTablePciAddr; + + return EFI_SUCCESS; + // + // Map error or unable to map the whole CmdList buffer into a contiguous region. + // +Error1: + PciIo->Unmap ( + PciIo, + AhciRegisters->MapCommandTable + ); +Error2: + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)MaxCommandTableSize), + AhciRegisters->AhciCommandTable + ); +Error3: + PciIo->Unmap ( + PciIo, + AhciRegisters->MapCmdList + ); +Error4: + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)MaxCommandListSize), + AhciRegisters->AhciCmdList + ); +Error5: + PciIo->Unmap ( + PciIo, + AhciRegisters->MapRFis + ); +Error6: + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)MaxReceiveFisSize), + AhciRegisters->AhciRFis + ); + + return Status; +} + +/** + Read logs from SATA device. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The multiplier of port. + @param Buffer The data buffer to store SATA logs. + @param LogNumber The address of the log. + @param PageNumber The page number of the log. + + @retval EFI_INVALID_PARAMETER PciIo, AhciRegisters or Buffer is NULL. + @retval others Return status of AhciPioTransfer(). +**/ +EFI_STATUS +AhciReadLogExt ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN OUT UINT8 *Buffer, + IN UINT8 LogNumber, + IN UINT8 PageNumber + ) +{ + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + + if ((PciIo == NULL) || (AhciRegisters == NULL) || (Buffer == NULL)) { + return EFI_INVALID_PARAMETER; + } + + /// + /// Read log from device + /// + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + ZeroMem (Buffer, 512); + + AtaCommandBlock.AtaCommand = ATA_CMD_READ_LOG_EXT; + AtaCommandBlock.AtaSectorCount = 1; + AtaCommandBlock.AtaSectorNumber = LogNumber; + AtaCommandBlock.AtaCylinderLow = PageNumber; + + return AhciPioTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + NULL, + 0, + TRUE, + &AtaCommandBlock, + &AtaStatusBlock, + Buffer, + 512, + ATA_ATAPI_TIMEOUT, + NULL + ); +} + +/** + Enable DEVSLP of the disk if supported. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The multiplier of port. + @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data. + + @retval EFI_SUCCESS The DEVSLP is enabled per policy successfully. + @retval EFI_UNSUPPORTED The DEVSLP isn't supported by the controller/device and policy requires to enable it. +**/ +EFI_STATUS +AhciEnableDevSlp ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_IDENTIFY_DATA *IdentifyData + ) +{ + EFI_STATUS Status; + UINT32 Offset; + UINT32 Capability2; + UINT8 LogData[512]; + DEVSLP_TIMING_VARIABLES DevSlpTiming; + UINT32 PortCmd; + UINT32 PortDevSlp; + + if (mAtaAtapiPolicy->DeviceSleepEnable != 1) { + return EFI_SUCCESS; + } + + // + // Do not enable DevSlp if DevSlp is not supported. + // + Capability2 = AhciReadReg (PciIo, AHCI_CAPABILITY2_OFFSET); + DEBUG ((DEBUG_INFO, "AHCI CAPABILITY2 = %08x\n", Capability2)); + if ((Capability2 & AHCI_CAP2_SDS) == 0) { + return EFI_UNSUPPORTED; + } + + // + // Do not enable DevSlp if DevSlp is not present + // Do not enable DevSlp if Hot Plug or Mechanical Presence Switch is supported + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH; + PortCmd = AhciReadReg (PciIo, Offset + EFI_AHCI_PORT_CMD); + PortDevSlp = AhciReadReg (PciIo, Offset + AHCI_PORT_DEVSLP); + DEBUG ((DEBUG_INFO, "Port CMD/DEVSLP = %08x / %08x\n", PortCmd, PortDevSlp)); + if (((PortDevSlp & AHCI_PORT_DEVSLP_DSP) == 0) || + ((PortCmd & (EFI_AHCI_PORT_CMD_HPCP | EFI_AHCI_PORT_CMD_MPSP)) != 0) + ) + { + return EFI_UNSUPPORTED; + } + + // + // Do not enable DevSlp if the device doesn't support DevSlp + // + DEBUG (( + DEBUG_INFO, + "IDENTIFY DEVICE: [77] = %04x, [78] = %04x, [79] = %04x\n", + IdentifyData->AtaData.reserved_77, + IdentifyData->AtaData.serial_ata_features_supported, + IdentifyData->AtaData.serial_ata_features_enabled + )); + if ((IdentifyData->AtaData.serial_ata_features_supported & BIT8) == 0) { + DEBUG (( + DEBUG_INFO, + "DevSlp feature is not supported for device at port [%d] PortMultiplier [%d]!\n", + Port, + PortMultiplier + )); + return EFI_UNSUPPORTED; + } + + // + // Enable DevSlp when it is not enabled. + // + if ((IdentifyData->AtaData.serial_ata_features_enabled & BIT8) != 0) { + Status = AhciDeviceSetFeature ( + PciIo, + AhciRegisters, + Port, + 0, + ATA_SUB_CMD_ENABLE_SATA_FEATURE, + 0x09, + ATA_ATAPI_TIMEOUT + ); + DEBUG (( + DEBUG_INFO, + "DevSlp set feature for device at port [%d] PortMultiplier [%d] - %r\n", + Port, + PortMultiplier, + Status + )); + if (EFI_ERROR (Status)) { + return Status; + } + } + + Status = AhciReadLogExt (PciIo, AhciRegisters, Port, PortMultiplier, LogData, 0x30, 0x08); + + // + // Clear PxCMD.ST and PxDEVSLP.ADSE before updating PxDEVSLP.DITO and PxDEVSLP.MDAT. + // + AhciWriteReg (PciIo, Offset + EFI_AHCI_PORT_CMD, PortCmd & ~EFI_AHCI_PORT_CMD_ST); + PortDevSlp &= ~AHCI_PORT_DEVSLP_ADSE; + AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp); + + // + // Set PxDEVSLP.DETO and PxDEVSLP.MDAT to 0. + // + PortDevSlp &= ~AHCI_PORT_DEVSLP_DETO_MASK; + PortDevSlp &= ~AHCI_PORT_DEVSLP_MDAT_MASK; + AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp); + DEBUG ((DEBUG_INFO, "Read Log Ext at port [%d] PortMultiplier [%d] - %r\n", Port, PortMultiplier, Status)); + if (EFI_ERROR (Status)) { + // + // Assume DEVSLP TIMING VARIABLES is not supported if the Identify Device Data log (30h, 8) fails + // + ZeroMem (&DevSlpTiming, sizeof (DevSlpTiming)); + } else { + CopyMem (&DevSlpTiming, &LogData[48], sizeof (DevSlpTiming)); + DEBUG (( + DEBUG_INFO, + "DevSlpTiming: Supported(%d), Deto(%d), Madt(%d)\n", + DevSlpTiming.Supported, + DevSlpTiming.Deto, + DevSlpTiming.Madt + )); + } + + // + // Use 20ms as default DETO when DEVSLP TIMING VARIABLES is not supported or the DETO is 0. + // + if ((DevSlpTiming.Supported == 0) || (DevSlpTiming.Deto == 0)) { + DevSlpTiming.Deto = 20; + } + + // + // Use 10ms as default MADT when DEVSLP TIMING VARIABLES is not supported or the MADT is 0. + // + if ((DevSlpTiming.Supported == 0) || (DevSlpTiming.Madt == 0)) { + DevSlpTiming.Madt = 10; + } + + PortDevSlp |= DevSlpTiming.Deto << 2; + PortDevSlp |= DevSlpTiming.Madt << 10; + AhciOrReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp); + + if (mAtaAtapiPolicy->AggressiveDeviceSleepEnable == 1) { + if ((Capability2 & AHCI_CAP2_SADM) != 0) { + PortDevSlp &= ~AHCI_PORT_DEVSLP_DITO_MASK; + PortDevSlp |= (625 << 15); + AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp); + + PortDevSlp |= AHCI_PORT_DEVSLP_ADSE; + AhciWriteReg (PciIo, Offset + AHCI_PORT_DEVSLP, PortDevSlp); + } + } + + AhciWriteReg (PciIo, Offset + EFI_AHCI_PORT_CMD, PortCmd); + + DEBUG (( + DEBUG_INFO, + "Enabled DevSlp feature at port [%d] PortMultiplier [%d], Port CMD/DEVSLP = %08x / %08x\n", + Port, + PortMultiplier, + PortCmd, + PortDevSlp + )); + + return EFI_SUCCESS; +} + +/** + Spin-up disk if IDD was incomplete or PUIS feature is enabled + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The multiplier of port. + @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data. + +**/ +EFI_STATUS +AhciSpinUpDisk ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN OUT EFI_IDENTIFY_DATA *IdentifyData + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_ATA_STATUS_BLOCK AtaStatusBlock; + UINT8 Buffer[512]; + + if (IdentifyData->AtaData.specific_config == ATA_SPINUP_CFG_REQUIRED_IDD_INCOMPLETE) { + // + // Use SET_FEATURE subcommand to spin up the device. + // + Status = AhciDeviceSetFeature ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + ATA_SUB_CMD_PUIS_SET_DEVICE_SPINUP, + 0x00, + ATA_SPINUP_TIMEOUT + ); + DEBUG (( + DEBUG_INFO, + "CMD_PUIS_SET_DEVICE_SPINUP for device at port [%d] PortMultiplier [%d] - %r!\n", + Port, + PortMultiplier, + Status + )); + if (EFI_ERROR (Status)) { + return Status; + } + } else { + ASSERT (IdentifyData->AtaData.specific_config == ATA_SPINUP_CFG_NOT_REQUIRED_IDD_INCOMPLETE); + + // + // Use READ_SECTORS to spin up the device if SpinUp SET FEATURE subcommand is not supported + // + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + ZeroMem (&AtaStatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + // + // Perform READ SECTORS PIO Data-In command to Read LBA 0 + // + AtaCommandBlock.AtaCommand = ATA_CMD_READ_SECTORS; + AtaCommandBlock.AtaSectorCount = 0x1; + + Status = AhciPioTransfer ( + PciIo, + AhciRegisters, + Port, + PortMultiplier, + NULL, + 0, + TRUE, + &AtaCommandBlock, + &AtaStatusBlock, + &Buffer, + sizeof (Buffer), + ATA_SPINUP_TIMEOUT, + NULL + ); + DEBUG (( + DEBUG_INFO, + "Read LBA 0 for device at port [%d] PortMultiplier [%d] - %r!\n", + Port, + PortMultiplier, + Status + )); + if (EFI_ERROR (Status)) { + return Status; + } + } + + // + // Read the complete IDENTIFY DEVICE data. + // + ZeroMem (IdentifyData, sizeof (*IdentifyData)); + Status = AhciIdentify (PciIo, AhciRegisters, Port, PortMultiplier, IdentifyData); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "Read IDD failed for device at port [%d] PortMultiplier [%d] - %r!\n", + Port, + PortMultiplier, + Status + )); + return Status; + } + + DEBUG (( + DEBUG_INFO, + "IDENTIFY DEVICE: [0] = %016x, [2] = %016x, [83] = %016x, [86] = %016x\n", + IdentifyData->AtaData.config, + IdentifyData->AtaData.specific_config, + IdentifyData->AtaData.command_set_supported_83, + IdentifyData->AtaData.command_set_feature_enb_86 + )); + // + // Check if IDD is incomplete + // + if ((IdentifyData->AtaData.config & BIT2) != 0) { + return EFI_DEVICE_ERROR; + } + + return EFI_SUCCESS; +} + +/** + Enable/disable/skip PUIS of the disk according to policy. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The multiplier of port. + +**/ +EFI_STATUS +AhciPuisEnable ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier + ) +{ + EFI_STATUS Status; + + Status = EFI_SUCCESS; + if (mAtaAtapiPolicy->PuisEnable == 0) { + Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, PortMultiplier, ATA_SUB_CMD_DISABLE_PUIS, 0x00, ATA_ATAPI_TIMEOUT); + } else if (mAtaAtapiPolicy->PuisEnable == 1) { + Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, PortMultiplier, ATA_SUB_CMD_ENABLE_PUIS, 0x00, ATA_ATAPI_TIMEOUT); + } + + DEBUG (( + DEBUG_INFO, + "%a PUIS feature at port [%d] PortMultiplier [%d] - %r!\n", + (mAtaAtapiPolicy->PuisEnable == 0) ? "Disable" : ( + (mAtaAtapiPolicy->PuisEnable == 1) ? "Enable" : "Skip" + ), + Port, + PortMultiplier, + Status + )); + return Status; +} + +/** + Initialize ATA host controller at AHCI mode. + + The function is designed to initialize ATA host controller. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +EFI_STATUS +EFIAPI +AhciModeInitialization ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ) +{ + EFI_STATUS Status; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; + UINT32 Capability; + UINT8 MaxPortNumber; + UINT32 PortImplementBitMap; + + EFI_AHCI_REGISTERS *AhciRegisters; + + UINT8 Port; + DATA_64 Data64; + UINT32 Offset; + UINT32 Data; + EFI_IDENTIFY_DATA Buffer; + EFI_ATA_DEVICE_TYPE DeviceType; + EFI_ATA_COLLECTIVE_MODE *SupportedModes; + EFI_ATA_TRANSFER_MODE TransferMode; + UINT32 PhyDetectDelay; + UINT32 Value; + + if (Instance == NULL) { + return EFI_INVALID_PARAMETER; + } + + PciIo = Instance->PciIo; + IdeInit = Instance->IdeControllerInit; + + Status = AhciReset (PciIo, EFI_AHCI_BUS_RESET_TIMEOUT); + + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + // + // Collect AHCI controller information + // + Capability = AhciReadReg (PciIo, EFI_AHCI_CAPABILITY_OFFSET); + + // + // Make sure that GHC.AE bit is set before accessing any AHCI registers. + // + Value = AhciReadReg (PciIo, EFI_AHCI_GHC_OFFSET); + + if ((Value & EFI_AHCI_GHC_ENABLE) == 0) { + AhciOrReg (PciIo, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE); + } + + // + // Enable 64-bit DMA support in the PCI layer if this controller + // supports it. + // + if ((Capability & EFI_AHCI_CAP_S64A) != 0) { + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationEnable, + EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE, + NULL + ); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_WARN, + "AhciModeInitialization: failed to enable 64-bit DMA on 64-bit capable controller (%r)\n", + Status + )); + } + } + + // + // Get the number of command slots per port supported by this HBA. + // + MaxPortNumber = (UINT8)((Capability & 0x1F) + 1); + + // + // Get the bit map of those ports exposed by this HBA. + // It indicates which ports that the HBA supports are available for software to use. + // + PortImplementBitMap = AhciReadReg (PciIo, EFI_AHCI_PI_OFFSET); + + AhciRegisters = &Instance->AhciRegisters; + Status = AhciCreateTransferDescriptor (PciIo, AhciRegisters); + + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + + for (Port = 0; Port < EFI_AHCI_MAX_PORTS; Port++) { + if ((PortImplementBitMap & (((UINT32)BIT0) << Port)) != 0) { + // + // According to AHCI spec, MaxPortNumber should be equal or greater than the number of implemented ports. + // + if ((MaxPortNumber--) == 0) { + // + // Should never be here. + // + ASSERT (FALSE); + return EFI_SUCCESS; + } + + IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, Port); + + // + // Initialize FIS Base Address Register and Command List Base Address Register for use. + // + Data64.Uint64 = (UINTN)(AhciRegisters->AhciRFisPciAddr) + sizeof (EFI_AHCI_RECEIVED_FIS) * Port; + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB; + AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32); + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU; + AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32); + + Data64.Uint64 = (UINTN)(AhciRegisters->AhciCmdListPciAddr); + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB; + AhciWriteReg (PciIo, Offset, Data64.Uint32.Lower32); + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU; + AhciWriteReg (PciIo, Offset, Data64.Uint32.Upper32); + + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + Data = AhciReadReg (PciIo, Offset); + if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) { + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_POD); + } + + if ((Capability & EFI_AHCI_CAP_SSS) != 0) { + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_SUD); + } + + // + // Disable aggressive power management. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT); + // + // Disable the reporting of the corresponding interrupt to system software. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE; + AhciAndReg (PciIo, Offset, 0); + + // + // Now inform the IDE Controller Init Module. + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, Port); + + // + // Enable FIS Receive DMA engine for the first D2H FIS. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciOrReg (PciIo, Offset, EFI_AHCI_PORT_CMD_FRE); + + // + // Wait for the Phy to detect the presence of a device. + // + PhyDetectDelay = EFI_AHCI_BUS_PHY_DETECT_TIMEOUT; + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SSTS; + do { + Data = AhciReadReg (PciIo, Offset) & EFI_AHCI_PORT_SSTS_DET_MASK; + if ((Data == EFI_AHCI_PORT_SSTS_DET_PCE) || (Data == EFI_AHCI_PORT_SSTS_DET)) { + break; + } + + MicroSecondDelay (1000); + PhyDetectDelay--; + } while (PhyDetectDelay > 0); + + if (PhyDetectDelay == 0) { + // + // No device detected at this port. + // Clear PxCMD.SUD for those ports at which there are no device present. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD; + AhciAndReg (PciIo, Offset, (UINT32) ~(EFI_AHCI_PORT_CMD_SUD)); + continue; + } + + Status = AhciWaitDeviceReady (PciIo, Port); + if (EFI_ERROR (Status)) { + continue; + } + + // + // When the first D2H register FIS is received, the content of PxSIG register is updated. + // + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG; + Status = AhciWaitMmioSet ( + PciIo, + Offset, + 0x0000FFFF, + 0x00000101, + EFI_TIMER_PERIOD_SECONDS (16) + ); + if (EFI_ERROR (Status)) { + continue; + } + + Data = AhciReadReg (PciIo, Offset); + if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATAPI_DEVICE_SIG) { + Status = AhciIdentifyPacket (PciIo, AhciRegisters, Port, 0, &Buffer); + + if (EFI_ERROR (Status)) { + continue; + } + + DeviceType = EfiIdeCdrom; + } else if ((Data & EFI_AHCI_ATAPI_SIG_MASK) == EFI_AHCI_ATA_DEVICE_SIG) { + Status = AhciIdentify (PciIo, AhciRegisters, Port, 0, &Buffer); + + if (EFI_ERROR (Status)) { + REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED)); + continue; + } + + DEBUG (( + DEBUG_INFO, + "IDENTIFY DEVICE: [0] = %016x, [2] = %016x, [83] = %016x, [86] = %016x\n", + Buffer.AtaData.config, + Buffer.AtaData.specific_config, + Buffer.AtaData.command_set_supported_83, + Buffer.AtaData.command_set_feature_enb_86 + )); + if ((Buffer.AtaData.config & BIT2) != 0) { + // + // SpinUp disk if device reported incomplete IDENTIFY DEVICE. + // + Status = AhciSpinUpDisk ( + PciIo, + AhciRegisters, + Port, + 0, + &Buffer + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Spin up standby device failed - %r\n", Status)); + continue; + } + } + + DeviceType = EfiIdeHarddisk; + } else { + continue; + } + + DEBUG (( + DEBUG_INFO, + "port [%d] port multitplier [%d] has a [%a]\n", + Port, + 0, + DeviceType == EfiIdeCdrom ? "cdrom" : "harddisk" + )); + + // + // If the device is a hard disk, then try to enable S.M.A.R.T feature + // + if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) { + AhciAtaSmartSupport ( + PciIo, + AhciRegisters, + Port, + 0, + &Buffer, + NULL + ); + } + + // + // Submit identify data to IDE controller init driver + // + IdeInit->SubmitData (IdeInit, Port, 0, &Buffer); + + // + // Now start to config ide device parameter and transfer mode. + // + Status = IdeInit->CalculateMode ( + IdeInit, + Port, + 0, + &SupportedModes + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Calculate Mode Fail, Status = %r\n", Status)); + continue; + } + + // + // Set best supported PIO mode on this IDE device + // + if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) { + TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO; + } else { + TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO; + } + + TransferMode.ModeNumber = (UINT8)(SupportedModes->PioMode.Mode); + + // + // Set supported DMA mode on this IDE device. Note that UDMA & MDMA can't + // be set together. Only one DMA mode can be set to a device. If setting + // DMA mode operation fails, we can continue moving on because we only use + // PIO mode at boot time. DMA modes are used by certain kind of OS booting + // + if (SupportedModes->UdmaMode.Valid) { + TransferMode.ModeCategory = EFI_ATA_MODE_UDMA; + TransferMode.ModeNumber = (UINT8)(SupportedModes->UdmaMode.Mode); + } else if (SupportedModes->MultiWordDmaMode.Valid) { + TransferMode.ModeCategory = EFI_ATA_MODE_MDMA; + TransferMode.ModeNumber = (UINT8)SupportedModes->MultiWordDmaMode.Mode; + } + + Status = AhciDeviceSetFeature (PciIo, AhciRegisters, Port, 0, 0x03, (UINT32)(*(UINT8 *)&TransferMode), ATA_ATAPI_TIMEOUT); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status)); + continue; + } + + // + // Found a ATA or ATAPI device, add it into the device list. + // + CreateNewDeviceInfo (Instance, Port, 0xFFFF, DeviceType, &Buffer); + if (DeviceType == EfiIdeHarddisk) { + REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE)); + AhciEnableDevSlp ( + PciIo, + AhciRegisters, + Port, + 0, + &Buffer + ); + } + + // + // Enable/disable PUIS according to policy setting if PUIS is capable (Word[83].BIT5 is set). + // + if ((Buffer.AtaData.command_set_supported_83 & BIT5) != 0) { + Status = AhciPuisEnable ( + PciIo, + AhciRegisters, + Port, + 0 + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "PUIS enable/disable failed, Status = %r\n", Status)); + continue; + } + } + } + } + + return EFI_SUCCESS; +} diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h index 5bb31057ec..d10ca99f74 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.h @@ -1,397 +1,397 @@ -/** @file
- Header file for AHCI mode of ATA host controller.
-
- Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __ATA_HC_AHCI_MODE_H__
-#define __ATA_HC_AHCI_MODE_H__
-
-#define EFI_AHCI_BAR_INDEX 0x05
-
-#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
-#define EFI_AHCI_CAP_SAM BIT18
-#define EFI_AHCI_CAP_SSS BIT27
-#define EFI_AHCI_CAP_S64A BIT31
-#define EFI_AHCI_GHC_OFFSET 0x0004
-#define EFI_AHCI_GHC_RESET BIT0
-#define EFI_AHCI_GHC_IE BIT1
-#define EFI_AHCI_GHC_ENABLE BIT31
-#define EFI_AHCI_IS_OFFSET 0x0008
-#define EFI_AHCI_PI_OFFSET 0x000C
-
-#define EFI_AHCI_MAX_PORTS 32
-
-#define AHCI_CAPABILITY2_OFFSET 0x0024
-#define AHCI_CAP2_SDS BIT3
-#define AHCI_CAP2_SADM BIT4
-
-typedef struct {
- UINT32 Lower32;
- UINT32 Upper32;
-} DATA_32;
-
-typedef union {
- DATA_32 Uint32;
- UINT64 Uint64;
-} DATA_64;
-
-//
-// Refer SATA1.0a spec section 5.2, the Phy detection time should be less than 10ms.
-// Add a bit of margin for robustness.
-//
-#define EFI_AHCI_BUS_PHY_DETECT_TIMEOUT 15
-//
-// Refer SATA1.0a spec, the FIS enable time should be less than 500ms.
-//
-#define EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT EFI_TIMER_PERIOD_MILLISECONDS(500)
-//
-// Refer SATA1.0a spec, the bus reset time should be less than 1s.
-//
-#define EFI_AHCI_BUS_RESET_TIMEOUT EFI_TIMER_PERIOD_SECONDS(1)
-
-#define EFI_AHCI_ATAPI_DEVICE_SIG 0xEB140000
-#define EFI_AHCI_ATA_DEVICE_SIG 0x00000000
-#define EFI_AHCI_PORT_MULTIPLIER_SIG 0x96690000
-#define EFI_AHCI_ATAPI_SIG_MASK 0xFFFF0000
-
-//
-// Each PRDT entry can point to a memory block up to 4M byte
-//
-#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
-
-#define EFI_AHCI_FIS_REGISTER_H2D 0x27 // Register FIS - Host to Device
-#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
-#define EFI_AHCI_FIS_REGISTER_D2H 0x34 // Register FIS - Device to Host
-#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
-#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 // DMA Activate FIS - Device to Host
-#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
-#define EFI_AHCI_FIS_DMA_SETUP 0x41 // DMA Setup FIS - Bi-directional
-#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
-#define EFI_AHCI_FIS_DATA 0x46 // Data FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST 0x58 // BIST Activate FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST_LENGTH 12
-#define EFI_AHCI_FIS_PIO_SETUP 0x5F // PIO Setup FIS - Device to Host
-#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
-#define EFI_AHCI_FIS_SET_DEVICE 0xA1 // Set Device Bits FIS - Device to Host
-#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
-
-#define EFI_AHCI_D2H_FIS_OFFSET 0x40
-#define EFI_AHCI_DMA_FIS_OFFSET 0x00
-#define EFI_AHCI_PIO_FIS_OFFSET 0x20
-#define EFI_AHCI_SDB_FIS_OFFSET 0x58
-#define EFI_AHCI_FIS_TYPE_MASK 0xFF
-#define EFI_AHCI_U_FIS_OFFSET 0x60
-
-//
-// Port register
-//
-#define EFI_AHCI_PORT_START 0x0100
-#define EFI_AHCI_PORT_REG_WIDTH 0x0080
-#define EFI_AHCI_PORT_CLB 0x0000
-#define EFI_AHCI_PORT_CLBU 0x0004
-#define EFI_AHCI_PORT_FB 0x0008
-#define EFI_AHCI_PORT_FBU 0x000C
-#define EFI_AHCI_PORT_IS 0x0010
-#define EFI_AHCI_PORT_IS_DHRS BIT0
-#define EFI_AHCI_PORT_IS_PSS BIT1
-#define EFI_AHCI_PORT_IS_DSS BIT2
-#define EFI_AHCI_PORT_IS_SDBS BIT3
-#define EFI_AHCI_PORT_IS_UFS BIT4
-#define EFI_AHCI_PORT_IS_DPS BIT5
-#define EFI_AHCI_PORT_IS_PCS BIT6
-#define EFI_AHCI_PORT_IS_DIS BIT7
-#define EFI_AHCI_PORT_IS_PRCS BIT22
-#define EFI_AHCI_PORT_IS_IPMS BIT23
-#define EFI_AHCI_PORT_IS_OFS BIT24
-#define EFI_AHCI_PORT_IS_INFS BIT26
-#define EFI_AHCI_PORT_IS_IFS BIT27
-#define EFI_AHCI_PORT_IS_HBDS BIT28
-#define EFI_AHCI_PORT_IS_HBFS BIT29
-#define EFI_AHCI_PORT_IS_TFES BIT30
-#define EFI_AHCI_PORT_IS_CPDS BIT31
-#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
-#define EFI_AHCI_PORT_IS_ERROR_MASK (EFI_AHCI_PORT_IS_INFS | EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_HBDS | EFI_AHCI_PORT_IS_HBFS | EFI_AHCI_PORT_IS_TFES)
-#define EFI_AHCI_PORT_IS_FATAL_ERROR_MASK (EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_HBDS | EFI_AHCI_PORT_IS_HBFS | EFI_AHCI_PORT_IS_TFES)
-
-#define EFI_AHCI_PORT_IE 0x0014
-#define EFI_AHCI_PORT_CMD 0x0018
-#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
-#define EFI_AHCI_PORT_CMD_ST BIT0
-#define EFI_AHCI_PORT_CMD_SUD BIT1
-#define EFI_AHCI_PORT_CMD_POD BIT2
-#define EFI_AHCI_PORT_CMD_CLO BIT3
-#define EFI_AHCI_PORT_CMD_FRE BIT4
-#define EFI_AHCI_PORT_CMD_CCS_MASK (BIT8 | BIT9 | BIT10 | BIT11 | BIT12)
-#define EFI_AHCI_PORT_CMD_CCS_SHIFT 8
-#define EFI_AHCI_PORT_CMD_FR BIT14
-#define EFI_AHCI_PORT_CMD_CR BIT15
-#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
-#define EFI_AHCI_PORT_CMD_PMA BIT17
-#define EFI_AHCI_PORT_CMD_HPCP BIT18
-#define EFI_AHCI_PORT_CMD_MPSP BIT19
-#define EFI_AHCI_PORT_CMD_CPD BIT20
-#define EFI_AHCI_PORT_CMD_ESP BIT21
-#define EFI_AHCI_PORT_CMD_ATAPI BIT24
-#define EFI_AHCI_PORT_CMD_DLAE BIT25
-#define EFI_AHCI_PORT_CMD_ALPE BIT26
-#define EFI_AHCI_PORT_CMD_ASP BIT27
-#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
-#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
-#define EFI_AHCI_PORT_TFD 0x0020
-#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
-#define EFI_AHCI_PORT_TFD_BSY BIT7
-#define EFI_AHCI_PORT_TFD_DRQ BIT3
-#define EFI_AHCI_PORT_TFD_ERR BIT0
-#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00 // ERROR field is specified by ATA/ATAPI Command Set specification
-#define EFI_AHCI_PORT_TFD_ERR_INT_CRC BIT15
-#define EFI_AHCI_PORT_SIG 0x0024
-#define EFI_AHCI_PORT_SSTS 0x0028
-#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SSTS_DET 0x0001
-#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
-#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL 0x002C
-#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
-#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
-#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
-#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
-#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
-#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
-#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
-#define EFI_AHCI_PORT_SERR 0x0030
-#define EFI_AHCI_PORT_SERR_RDIE BIT0
-#define EFI_AHCI_PORT_SERR_RCE BIT1
-#define EFI_AHCI_PORT_SERR_TDIE BIT8
-#define EFI_AHCI_PORT_SERR_PCDIE BIT9
-#define EFI_AHCI_PORT_SERR_PE BIT10
-#define EFI_AHCI_PORT_SERR_IE BIT11
-#define EFI_AHCI_PORT_SERR_PRC BIT16
-#define EFI_AHCI_PORT_SERR_PIE BIT17
-#define EFI_AHCI_PORT_SERR_CW BIT18
-#define EFI_AHCI_PORT_SERR_BDE BIT19
-#define EFI_AHCI_PORT_SERR_DE BIT20
-#define EFI_AHCI_PORT_SERR_CRCE BIT21
-#define EFI_AHCI_PORT_SERR_HE BIT22
-#define EFI_AHCI_PORT_SERR_LSE BIT23
-#define EFI_AHCI_PORT_SERR_TSTE BIT24
-#define EFI_AHCI_PORT_SERR_UFT BIT25
-#define EFI_AHCI_PORT_SERR_EX BIT26
-#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_SACT 0x0034
-#define EFI_AHCI_PORT_CI 0x0038
-#define EFI_AHCI_PORT_SNTF 0x003C
-#define AHCI_PORT_DEVSLP 0x0044
-#define AHCI_PORT_DEVSLP_ADSE BIT0
-#define AHCI_PORT_DEVSLP_DSP BIT1
-#define AHCI_PORT_DEVSLP_DETO_MASK 0x000003FC
-#define AHCI_PORT_DEVSLP_MDAT_MASK 0x00007C00
-#define AHCI_PORT_DEVSLP_DITO_MASK 0x01FF8000
-#define AHCI_PORT_DEVSLP_DM_MASK 0x1E000000
-
-#define AHCI_COMMAND_RETRIES (PcdGet32 (PcdAhciCommandRetryCount))
-
-#pragma pack(1)
-//
-// Command List structure includes total 32 entries.
-// The entry data structure is listed at the following.
-//
-typedef struct {
- UINT32 AhciCmdCfl : 5; // Command FIS Length
- UINT32 AhciCmdA : 1; // ATAPI
- UINT32 AhciCmdW : 1; // Write
- UINT32 AhciCmdP : 1; // Prefetchable
- UINT32 AhciCmdR : 1; // Reset
- UINT32 AhciCmdB : 1; // BIST
- UINT32 AhciCmdC : 1; // Clear Busy upon R_OK
- UINT32 AhciCmdRsvd : 1;
- UINT32 AhciCmdPmp : 4; // Port Multiplier Port
- UINT32 AhciCmdPrdtl : 16; // Physical Region Descriptor Table Length
- UINT32 AhciCmdPrdbc; // Physical Region Descriptor Byte Count
- UINT32 AhciCmdCtba; // Command Table Descriptor Base Address
- UINT32 AhciCmdCtbau; // Command Table Descriptor Base Address Upper 32-BITs
- UINT32 AhciCmdRsvd1[4];
-} EFI_AHCI_COMMAND_LIST;
-
-//
-// This is a software constructed FIS.
-// For data transfer operations, this is the H2D Register FIS format as
-// specified in the Serial ATA Revision 2.6 specification.
-//
-typedef struct {
- UINT8 AhciCFisType;
- UINT8 AhciCFisPmNum : 4;
- UINT8 AhciCFisRsvd : 1;
- UINT8 AhciCFisRsvd1 : 1;
- UINT8 AhciCFisRsvd2 : 1;
- UINT8 AhciCFisCmdInd : 1;
- UINT8 AhciCFisCmd;
- UINT8 AhciCFisFeature;
- UINT8 AhciCFisSecNum;
- UINT8 AhciCFisClyLow;
- UINT8 AhciCFisClyHigh;
- UINT8 AhciCFisDevHead;
- UINT8 AhciCFisSecNumExp;
- UINT8 AhciCFisClyLowExp;
- UINT8 AhciCFisClyHighExp;
- UINT8 AhciCFisFeatureExp;
- UINT8 AhciCFisSecCount;
- UINT8 AhciCFisSecCountExp;
- UINT8 AhciCFisRsvd3;
- UINT8 AhciCFisControl;
- UINT8 AhciCFisRsvd4[4];
- UINT8 AhciCFisRsvd5[44];
-} EFI_AHCI_COMMAND_FIS;
-
-typedef enum {
- SataFisD2H = 0,
- SataFisPioSetup,
- SataFisDmaSetup
-} SATA_FIS_TYPE;
-
-//
-// ACMD: ATAPI command (12 or 16 bytes)
-//
-typedef struct {
- UINT8 AtapiCmd[0x10];
-} EFI_AHCI_ATAPI_COMMAND;
-
-//
-// Physical Region Descriptor Table includes up to 65535 entries
-// The entry data structure is listed at the following.
-// the actual entry number comes from the PRDTL field in the command
-// list entry for this command slot.
-//
-typedef struct {
- UINT32 AhciPrdtDba; // Data Base Address
- UINT32 AhciPrdtDbau; // Data Base Address Upper 32-BITs
- UINT32 AhciPrdtRsvd;
- UINT32 AhciPrdtDbc : 22; // Data Byte Count
- UINT32 AhciPrdtRsvd1 : 9;
- UINT32 AhciPrdtIoc : 1; // Interrupt on Completion
-} EFI_AHCI_COMMAND_PRDT;
-
-//
-// Command table data structure which is pointed to by the entry in the command list
-//
-typedef struct {
- EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
- EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
- UINT8 Reserved[0x30];
- EFI_AHCI_COMMAND_PRDT PrdtTable[65535]; // The scatter/gather list for data transfer
-} EFI_AHCI_COMMAND_TABLE;
-
-//
-// Received FIS structure
-//
-typedef struct {
- UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
- UINT8 AhciDmaSetupFisRsvd[0x04];
- UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
- UINT8 AhciPioSetupFisRsvd[0x0C];
- UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
- UINT8 AhciD2HRegisterFisRsvd[0x04];
- UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
- UINT8 AhciUnknownFis[0x40]; // Unknown Fis: offset 0x60
- UINT8 AhciUnknownFisRsvd[0x60];
-} EFI_AHCI_RECEIVED_FIS;
-
-typedef struct {
- UINT8 Madt : 5;
- UINT8 Reserved_5 : 3;
- UINT8 Deto;
- UINT16 Reserved_16;
- UINT32 Reserved_32 : 31;
- UINT32 Supported : 1;
-} DEVSLP_TIMING_VARIABLES;
-
-#pragma pack()
-
-typedef struct {
- EFI_AHCI_RECEIVED_FIS *AhciRFis;
- EFI_AHCI_COMMAND_LIST *AhciCmdList;
- EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
- EFI_AHCI_RECEIVED_FIS *AhciRFisPciAddr;
- EFI_AHCI_COMMAND_LIST *AhciCmdListPciAddr;
- EFI_AHCI_COMMAND_TABLE *AhciCommandTablePciAddr;
- UINT64 MaxCommandListSize;
- UINT64 MaxCommandTableSize;
- UINT64 MaxReceiveFisSize;
- VOID *MapRFis;
- VOID *MapCmdList;
- VOID *MapCommandTable;
-} EFI_AHCI_REGISTERS;
-
-/**
- This function is used to send out ATAPI commands conforms to the Packet Command
- with PIO Protocol.
-
- @param PciIo The PCI IO protocol instance.
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The number of port multiplier.
- @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure.
-
- @retval EFI_SUCCESS send out the ATAPI packet command successfully
- and device sends data successfully.
- @retval EFI_DEVICE_ERROR the device failed to send data.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPacketCommandExecute (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
- );
-
-/**
- Start command for give slot on specific port.
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param CommandSlot The number of CommandSlot.
- @param Timeout The timeout value of start, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- );
-
-/**
- Stop command running for giving port
-
- @param PciIo The PCI IO protocol instance.
- @param Port The number of port.
- @param Timeout The timeout value of stop, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT8 Port,
- IN UINT64 Timeout
- );
-
-#endif
+/** @file + Header file for AHCI mode of ATA host controller. + + Copyright (c) 2010 - 2020, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __ATA_HC_AHCI_MODE_H__ +#define __ATA_HC_AHCI_MODE_H__ + +#define EFI_AHCI_BAR_INDEX 0x05 + +#define EFI_AHCI_CAPABILITY_OFFSET 0x0000 +#define EFI_AHCI_CAP_SAM BIT18 +#define EFI_AHCI_CAP_SSS BIT27 +#define EFI_AHCI_CAP_S64A BIT31 +#define EFI_AHCI_GHC_OFFSET 0x0004 +#define EFI_AHCI_GHC_RESET BIT0 +#define EFI_AHCI_GHC_IE BIT1 +#define EFI_AHCI_GHC_ENABLE BIT31 +#define EFI_AHCI_IS_OFFSET 0x0008 +#define EFI_AHCI_PI_OFFSET 0x000C + +#define EFI_AHCI_MAX_PORTS 32 + +#define AHCI_CAPABILITY2_OFFSET 0x0024 +#define AHCI_CAP2_SDS BIT3 +#define AHCI_CAP2_SADM BIT4 + +typedef struct { + UINT32 Lower32; + UINT32 Upper32; +} DATA_32; + +typedef union { + DATA_32 Uint32; + UINT64 Uint64; +} DATA_64; + +// +// Refer SATA1.0a spec section 5.2, the Phy detection time should be less than 10ms. +// Add a bit of margin for robustness. +// +#define EFI_AHCI_BUS_PHY_DETECT_TIMEOUT 15 +// +// Refer SATA1.0a spec, the FIS enable time should be less than 500ms. +// +#define EFI_AHCI_PORT_CMD_FR_CLEAR_TIMEOUT EFI_TIMER_PERIOD_MILLISECONDS(500) +// +// Refer SATA1.0a spec, the bus reset time should be less than 1s. +// +#define EFI_AHCI_BUS_RESET_TIMEOUT EFI_TIMER_PERIOD_SECONDS(1) + +#define EFI_AHCI_ATAPI_DEVICE_SIG 0xEB140000 +#define EFI_AHCI_ATA_DEVICE_SIG 0x00000000 +#define EFI_AHCI_PORT_MULTIPLIER_SIG 0x96690000 +#define EFI_AHCI_ATAPI_SIG_MASK 0xFFFF0000 + +// +// Each PRDT entry can point to a memory block up to 4M byte +// +#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000 + +#define EFI_AHCI_FIS_REGISTER_H2D 0x27 // Register FIS - Host to Device +#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20 +#define EFI_AHCI_FIS_REGISTER_D2H 0x34 // Register FIS - Device to Host +#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20 +#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 // DMA Activate FIS - Device to Host +#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4 +#define EFI_AHCI_FIS_DMA_SETUP 0x41 // DMA Setup FIS - Bi-directional +#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28 +#define EFI_AHCI_FIS_DATA 0x46 // Data FIS - Bi-directional +#define EFI_AHCI_FIS_BIST 0x58 // BIST Activate FIS - Bi-directional +#define EFI_AHCI_FIS_BIST_LENGTH 12 +#define EFI_AHCI_FIS_PIO_SETUP 0x5F // PIO Setup FIS - Device to Host +#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20 +#define EFI_AHCI_FIS_SET_DEVICE 0xA1 // Set Device Bits FIS - Device to Host +#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8 + +#define EFI_AHCI_D2H_FIS_OFFSET 0x40 +#define EFI_AHCI_DMA_FIS_OFFSET 0x00 +#define EFI_AHCI_PIO_FIS_OFFSET 0x20 +#define EFI_AHCI_SDB_FIS_OFFSET 0x58 +#define EFI_AHCI_FIS_TYPE_MASK 0xFF +#define EFI_AHCI_U_FIS_OFFSET 0x60 + +// +// Port register +// +#define EFI_AHCI_PORT_START 0x0100 +#define EFI_AHCI_PORT_REG_WIDTH 0x0080 +#define EFI_AHCI_PORT_CLB 0x0000 +#define EFI_AHCI_PORT_CLBU 0x0004 +#define EFI_AHCI_PORT_FB 0x0008 +#define EFI_AHCI_PORT_FBU 0x000C +#define EFI_AHCI_PORT_IS 0x0010 +#define EFI_AHCI_PORT_IS_DHRS BIT0 +#define EFI_AHCI_PORT_IS_PSS BIT1 +#define EFI_AHCI_PORT_IS_DSS BIT2 +#define EFI_AHCI_PORT_IS_SDBS BIT3 +#define EFI_AHCI_PORT_IS_UFS BIT4 +#define EFI_AHCI_PORT_IS_DPS BIT5 +#define EFI_AHCI_PORT_IS_PCS BIT6 +#define EFI_AHCI_PORT_IS_DIS BIT7 +#define EFI_AHCI_PORT_IS_PRCS BIT22 +#define EFI_AHCI_PORT_IS_IPMS BIT23 +#define EFI_AHCI_PORT_IS_OFS BIT24 +#define EFI_AHCI_PORT_IS_INFS BIT26 +#define EFI_AHCI_PORT_IS_IFS BIT27 +#define EFI_AHCI_PORT_IS_HBDS BIT28 +#define EFI_AHCI_PORT_IS_HBFS BIT29 +#define EFI_AHCI_PORT_IS_TFES BIT30 +#define EFI_AHCI_PORT_IS_CPDS BIT31 +#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF +#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F +#define EFI_AHCI_PORT_IS_ERROR_MASK (EFI_AHCI_PORT_IS_INFS | EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_HBDS | EFI_AHCI_PORT_IS_HBFS | EFI_AHCI_PORT_IS_TFES) +#define EFI_AHCI_PORT_IS_FATAL_ERROR_MASK (EFI_AHCI_PORT_IS_IFS | EFI_AHCI_PORT_IS_HBDS | EFI_AHCI_PORT_IS_HBFS | EFI_AHCI_PORT_IS_TFES) + +#define EFI_AHCI_PORT_IE 0x0014 +#define EFI_AHCI_PORT_CMD 0x0018 +#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE +#define EFI_AHCI_PORT_CMD_ST BIT0 +#define EFI_AHCI_PORT_CMD_SUD BIT1 +#define EFI_AHCI_PORT_CMD_POD BIT2 +#define EFI_AHCI_PORT_CMD_CLO BIT3 +#define EFI_AHCI_PORT_CMD_FRE BIT4 +#define EFI_AHCI_PORT_CMD_CCS_MASK (BIT8 | BIT9 | BIT10 | BIT11 | BIT12) +#define EFI_AHCI_PORT_CMD_CCS_SHIFT 8 +#define EFI_AHCI_PORT_CMD_FR BIT14 +#define EFI_AHCI_PORT_CMD_CR BIT15 +#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL) +#define EFI_AHCI_PORT_CMD_PMA BIT17 +#define EFI_AHCI_PORT_CMD_HPCP BIT18 +#define EFI_AHCI_PORT_CMD_MPSP BIT19 +#define EFI_AHCI_PORT_CMD_CPD BIT20 +#define EFI_AHCI_PORT_CMD_ESP BIT21 +#define EFI_AHCI_PORT_CMD_ATAPI BIT24 +#define EFI_AHCI_PORT_CMD_DLAE BIT25 +#define EFI_AHCI_PORT_CMD_ALPE BIT26 +#define EFI_AHCI_PORT_CMD_ASP BIT27 +#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31) +#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 ) +#define EFI_AHCI_PORT_TFD 0x0020 +#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0) +#define EFI_AHCI_PORT_TFD_BSY BIT7 +#define EFI_AHCI_PORT_TFD_DRQ BIT3 +#define EFI_AHCI_PORT_TFD_ERR BIT0 +#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00 // ERROR field is specified by ATA/ATAPI Command Set specification +#define EFI_AHCI_PORT_TFD_ERR_INT_CRC BIT15 +#define EFI_AHCI_PORT_SIG 0x0024 +#define EFI_AHCI_PORT_SSTS 0x0028 +#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F +#define EFI_AHCI_PORT_SSTS_DET 0x0001 +#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003 +#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0 +#define EFI_AHCI_PORT_SCTL 0x002C +#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F +#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK) +#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001 +#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003 +#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0 +#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00 +#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300 +#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100 +#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200 +#define EFI_AHCI_PORT_SERR 0x0030 +#define EFI_AHCI_PORT_SERR_RDIE BIT0 +#define EFI_AHCI_PORT_SERR_RCE BIT1 +#define EFI_AHCI_PORT_SERR_TDIE BIT8 +#define EFI_AHCI_PORT_SERR_PCDIE BIT9 +#define EFI_AHCI_PORT_SERR_PE BIT10 +#define EFI_AHCI_PORT_SERR_IE BIT11 +#define EFI_AHCI_PORT_SERR_PRC BIT16 +#define EFI_AHCI_PORT_SERR_PIE BIT17 +#define EFI_AHCI_PORT_SERR_CW BIT18 +#define EFI_AHCI_PORT_SERR_BDE BIT19 +#define EFI_AHCI_PORT_SERR_DE BIT20 +#define EFI_AHCI_PORT_SERR_CRCE BIT21 +#define EFI_AHCI_PORT_SERR_HE BIT22 +#define EFI_AHCI_PORT_SERR_LSE BIT23 +#define EFI_AHCI_PORT_SERR_TSTE BIT24 +#define EFI_AHCI_PORT_SERR_UFT BIT25 +#define EFI_AHCI_PORT_SERR_EX BIT26 +#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF +#define EFI_AHCI_PORT_SACT 0x0034 +#define EFI_AHCI_PORT_CI 0x0038 +#define EFI_AHCI_PORT_SNTF 0x003C +#define AHCI_PORT_DEVSLP 0x0044 +#define AHCI_PORT_DEVSLP_ADSE BIT0 +#define AHCI_PORT_DEVSLP_DSP BIT1 +#define AHCI_PORT_DEVSLP_DETO_MASK 0x000003FC +#define AHCI_PORT_DEVSLP_MDAT_MASK 0x00007C00 +#define AHCI_PORT_DEVSLP_DITO_MASK 0x01FF8000 +#define AHCI_PORT_DEVSLP_DM_MASK 0x1E000000 + +#define AHCI_COMMAND_RETRIES (PcdGet32 (PcdAhciCommandRetryCount)) + +#pragma pack(1) +// +// Command List structure includes total 32 entries. +// The entry data structure is listed at the following. +// +typedef struct { + UINT32 AhciCmdCfl : 5; // Command FIS Length + UINT32 AhciCmdA : 1; // ATAPI + UINT32 AhciCmdW : 1; // Write + UINT32 AhciCmdP : 1; // Prefetchable + UINT32 AhciCmdR : 1; // Reset + UINT32 AhciCmdB : 1; // BIST + UINT32 AhciCmdC : 1; // Clear Busy upon R_OK + UINT32 AhciCmdRsvd : 1; + UINT32 AhciCmdPmp : 4; // Port Multiplier Port + UINT32 AhciCmdPrdtl : 16; // Physical Region Descriptor Table Length + UINT32 AhciCmdPrdbc; // Physical Region Descriptor Byte Count + UINT32 AhciCmdCtba; // Command Table Descriptor Base Address + UINT32 AhciCmdCtbau; // Command Table Descriptor Base Address Upper 32-BITs + UINT32 AhciCmdRsvd1[4]; +} EFI_AHCI_COMMAND_LIST; + +// +// This is a software constructed FIS. +// For data transfer operations, this is the H2D Register FIS format as +// specified in the Serial ATA Revision 2.6 specification. +// +typedef struct { + UINT8 AhciCFisType; + UINT8 AhciCFisPmNum : 4; + UINT8 AhciCFisRsvd : 1; + UINT8 AhciCFisRsvd1 : 1; + UINT8 AhciCFisRsvd2 : 1; + UINT8 AhciCFisCmdInd : 1; + UINT8 AhciCFisCmd; + UINT8 AhciCFisFeature; + UINT8 AhciCFisSecNum; + UINT8 AhciCFisClyLow; + UINT8 AhciCFisClyHigh; + UINT8 AhciCFisDevHead; + UINT8 AhciCFisSecNumExp; + UINT8 AhciCFisClyLowExp; + UINT8 AhciCFisClyHighExp; + UINT8 AhciCFisFeatureExp; + UINT8 AhciCFisSecCount; + UINT8 AhciCFisSecCountExp; + UINT8 AhciCFisRsvd3; + UINT8 AhciCFisControl; + UINT8 AhciCFisRsvd4[4]; + UINT8 AhciCFisRsvd5[44]; +} EFI_AHCI_COMMAND_FIS; + +typedef enum { + SataFisD2H = 0, + SataFisPioSetup, + SataFisDmaSetup +} SATA_FIS_TYPE; + +// +// ACMD: ATAPI command (12 or 16 bytes) +// +typedef struct { + UINT8 AtapiCmd[0x10]; +} EFI_AHCI_ATAPI_COMMAND; + +// +// Physical Region Descriptor Table includes up to 65535 entries +// The entry data structure is listed at the following. +// the actual entry number comes from the PRDTL field in the command +// list entry for this command slot. +// +typedef struct { + UINT32 AhciPrdtDba; // Data Base Address + UINT32 AhciPrdtDbau; // Data Base Address Upper 32-BITs + UINT32 AhciPrdtRsvd; + UINT32 AhciPrdtDbc : 22; // Data Byte Count + UINT32 AhciPrdtRsvd1 : 9; + UINT32 AhciPrdtIoc : 1; // Interrupt on Completion +} EFI_AHCI_COMMAND_PRDT; + +// +// Command table data structure which is pointed to by the entry in the command list +// +typedef struct { + EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS. + EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd. + UINT8 Reserved[0x30]; + EFI_AHCI_COMMAND_PRDT PrdtTable[65535]; // The scatter/gather list for data transfer +} EFI_AHCI_COMMAND_TABLE; + +// +// Received FIS structure +// +typedef struct { + UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00 + UINT8 AhciDmaSetupFisRsvd[0x04]; + UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20 + UINT8 AhciPioSetupFisRsvd[0x0C]; + UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40 + UINT8 AhciD2HRegisterFisRsvd[0x04]; + UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58 + UINT8 AhciUnknownFis[0x40]; // Unknown Fis: offset 0x60 + UINT8 AhciUnknownFisRsvd[0x60]; +} EFI_AHCI_RECEIVED_FIS; + +typedef struct { + UINT8 Madt : 5; + UINT8 Reserved_5 : 3; + UINT8 Deto; + UINT16 Reserved_16; + UINT32 Reserved_32 : 31; + UINT32 Supported : 1; +} DEVSLP_TIMING_VARIABLES; + +#pragma pack() + +typedef struct { + EFI_AHCI_RECEIVED_FIS *AhciRFis; + EFI_AHCI_COMMAND_LIST *AhciCmdList; + EFI_AHCI_COMMAND_TABLE *AhciCommandTable; + EFI_AHCI_RECEIVED_FIS *AhciRFisPciAddr; + EFI_AHCI_COMMAND_LIST *AhciCmdListPciAddr; + EFI_AHCI_COMMAND_TABLE *AhciCommandTablePciAddr; + UINT64 MaxCommandListSize; + UINT64 MaxCommandTableSize; + UINT64 MaxReceiveFisSize; + VOID *MapRFis; + VOID *MapCmdList; + VOID *MapCommandTable; +} EFI_AHCI_REGISTERS; + +/** + This function is used to send out ATAPI commands conforms to the Packet Command + with PIO Protocol. + + @param PciIo The PCI IO protocol instance. + @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param Port The number of port. + @param PortMultiplier The number of port multiplier. + @param Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET structure. + + @retval EFI_SUCCESS send out the ATAPI packet command successfully + and device sends data successfully. + @retval EFI_DEVICE_ERROR the device failed to send data. + +**/ +EFI_STATUS +EFIAPI +AhciPacketCommandExecute ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet + ); + +/** + Start command for give slot on specific port. + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param CommandSlot The number of CommandSlot. + @param Timeout The timeout value of start, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The command start unsuccessfully. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_SUCCESS The command start successfully. + +**/ +EFI_STATUS +EFIAPI +AhciStartCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT8 CommandSlot, + IN UINT64 Timeout + ); + +/** + Stop command running for giving port + + @param PciIo The PCI IO protocol instance. + @param Port The number of port. + @param Timeout The timeout value of stop, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The command stop unsuccessfully. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_SUCCESS The command stop successfully. + +**/ +EFI_STATUS +EFIAPI +AhciStopCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT8 Port, + IN UINT64 Timeout + ); + +#endif diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c index f39c909d06..9e33b3372b 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.c @@ -1,2685 +1,2685 @@ -/** @file
- This file implements ATA_PASSTHRU_PROTOCOL and EXT_SCSI_PASSTHRU_PROTOCOL interfaces
- for managed ATA controllers.
-
- Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "AtaAtapiPassThru.h"
-
-//
-// EFI_DRIVER_BINDING_PROTOCOL instance
-//
-EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding = {
- AtaAtapiPassThruSupported,
- AtaAtapiPassThruStart,
- AtaAtapiPassThruStop,
- 0x10,
- NULL,
- NULL
-};
-
-ATA_ATAPI_PASS_THRU_INSTANCE gAtaAtapiPassThruInstanceTemplate = {
- ATA_ATAPI_PASS_THRU_SIGNATURE,
- 0, // Controller Handle
- NULL, // PciIo Protocol
- NULL, // IdeControllerInit Protocol
- { // AtaPassThruMode
- //
- // According to UEFI2.3 spec Section 12.10, Drivers for non-RAID ATA controllers should set
- // both EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL
- // bits.
- // Note that the driver doesn't support AtaPassThru non blocking I/O.
- //
- EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_NONBLOCKIO,
- //
- // IoAlign
- //
- sizeof (UINTN)
- },
- { // AtaPassThru
- NULL,
- AtaPassThruPassThru,
- AtaPassThruGetNextPort,
- AtaPassThruGetNextDevice,
- AtaPassThruBuildDevicePath,
- AtaPassThruGetDevice,
- AtaPassThruResetPort,
- AtaPassThruResetDevice
- },
- { // ExtScsiPassThruMode
- //
- // AdapterId
- //
- 0,
- //
- // According to UEFI2.3 spec Section 14.7, Drivers for non-RAID SCSI controllers should set
- // both EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL
- // bits.
- // Note that the driver doesn't support ExtScsiPassThru non blocking I/O.
- //
- EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL,
- //
- // IoAlign
- //
- sizeof (UINTN)
- },
- { // ExtScsiPassThru
- NULL,
- ExtScsiPassThruPassThru,
- ExtScsiPassThruGetNextTargetLun,
- ExtScsiPassThruBuildDevicePath,
- ExtScsiPassThruGetTargetLun,
- ExtScsiPassThruResetChannel,
- ExtScsiPassThruResetTargetLun,
- ExtScsiPassThruGetNextTarget
- },
- EfiAtaUnknownMode, // Work Mode
- { // IdeRegisters
- { 0 },
- { 0 }
- },
- { // AhciRegisters
- 0
- },
- { // DeviceList
- NULL,
- NULL
- },
- 0, // EnabledPciAttributes
- 0, // OriginalAttributes
- 0, // PreviousPort
- 0, // PreviousPortMultiplier
- 0, // PreviousTargetId
- 0, // PreviousLun
- NULL, // Timer event
- { // NonBlocking TaskList
- NULL,
- NULL
- }
-};
-
-ATAPI_DEVICE_PATH mAtapiDevicePathTemplate = {
- {
- MESSAGING_DEVICE_PATH,
- MSG_ATAPI_DP,
- {
- (UINT8)(sizeof (ATAPI_DEVICE_PATH)),
- (UINT8)((sizeof (ATAPI_DEVICE_PATH)) >> 8)
- }
- },
- 0,
- 0,
- 0
-};
-
-SATA_DEVICE_PATH mSataDevicePathTemplate = {
- {
- MESSAGING_DEVICE_PATH,
- MSG_SATA_DP,
- {
- (UINT8)(sizeof (SATA_DEVICE_PATH)),
- (UINT8)((sizeof (SATA_DEVICE_PATH)) >> 8)
- }
- },
- 0,
- 0,
- 0
-};
-
-UINT8 mScsiId[TARGET_MAX_BYTES] = {
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF
-};
-
-EDKII_ATA_ATAPI_POLICY_PROTOCOL *mAtaAtapiPolicy;
-EDKII_ATA_ATAPI_POLICY_PROTOCOL mDefaultAtaAtapiPolicy = {
- EDKII_ATA_ATAPI_POLICY_VERSION,
- 2, // PuisEnable
- 0, // DeviceSleepEnable
- 0, // AggressiveDeviceSleepEnable
- 0 // Reserved
-};
-
-/**
- Sends an ATA command to an ATA device that is attached to the ATA controller. This function
- supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
- and the non-blocking I/O functionality is optional.
-
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
- and PortMultiplierPort.
- @param[in] Instance Pointer to the ATA_ATAPI_PASS_THRU_INSTANCE.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS The ATA command was sent by the host. For
- bi-directional commands, InTransferLength bytes
- were transferred from InDataBuffer. For
- write and bi-directional commands, OutTransferLength
- bytes were transferred by OutDataBuffer.
- @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number
- of bytes that could be transferred is returned
- in InTransferLength. For write and bi-directional
- commands, OutTransferLength bytes were transferred
- by OutDataBuffer.
- @retval EFI_NOT_READY The ATA command could not be sent because
- there are too many ATA commands already
- queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting
- to send the ATA command.
- @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents
- of Acb are invalid. The ATA command was
- not sent, so no additional status information
- is available.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruPassThruExecute (
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort,
- IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN ATA_NONBLOCK_TASK *Task OPTIONAL
- )
-{
- EFI_ATA_PASS_THRU_CMD_PROTOCOL Protocol;
- EFI_ATA_HC_WORK_MODE Mode;
- EFI_STATUS Status;
-
- Protocol = Packet->Protocol;
-
- Mode = Instance->Mode;
- switch (Mode) {
- case EfiAtaIdeMode:
- //
- // Reassign IDE mode io port registers' base addresses
- //
- Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- switch (Protocol) {
- case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Port],
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
- Status = AtaPioDataInOut (
- Instance->PciIo,
- &Instance->IdeRegisters[Port],
- Packet->InDataBuffer,
- Packet->InTransferLength,
- TRUE,
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
- Status = AtaPioDataInOut (
- Instance->PciIo,
- &Instance->IdeRegisters[Port],
- Packet->OutDataBuffer,
- Packet->OutTransferLength,
- FALSE,
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
- Status = AtaUdmaInOut (
- Instance,
- &Instance->IdeRegisters[Port],
- TRUE,
- Packet->InDataBuffer,
- Packet->InTransferLength,
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
- Status = AtaUdmaInOut (
- Instance,
- &Instance->IdeRegisters[Port],
- FALSE,
- Packet->OutDataBuffer,
- Packet->OutTransferLength,
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- default:
- return EFI_UNSUPPORTED;
- }
-
- break;
- case EfiAtaAhciMode:
- if (PortMultiplierPort == 0xFFFF) {
- //
- // If there is no port multiplier, PortMultiplierPort will be 0xFFFF
- // according to UEFI spec. Here, we convert its value to 0 to follow
- // AHCI spec.
- //
- PortMultiplierPort = 0;
- }
-
- switch (Protocol) {
- case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
- Status = AhciNonDataTransfer (
- Instance->PciIo,
- &Instance->AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplierPort,
- NULL,
- 0,
- Packet->Acb,
- Packet->Asb,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
- Status = AhciPioTransfer (
- Instance->PciIo,
- &Instance->AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplierPort,
- NULL,
- 0,
- TRUE,
- Packet->Acb,
- Packet->Asb,
- Packet->InDataBuffer,
- Packet->InTransferLength,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
- Status = AhciPioTransfer (
- Instance->PciIo,
- &Instance->AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplierPort,
- NULL,
- 0,
- FALSE,
- Packet->Acb,
- Packet->Asb,
- Packet->OutDataBuffer,
- Packet->OutTransferLength,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
- Status = AhciDmaTransfer (
- Instance,
- &Instance->AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplierPort,
- NULL,
- 0,
- TRUE,
- Packet->Acb,
- Packet->Asb,
- Packet->InDataBuffer,
- Packet->InTransferLength,
- Packet->Timeout,
- Task
- );
- break;
- case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
- Status = AhciDmaTransfer (
- Instance,
- &Instance->AhciRegisters,
- (UINT8)Port,
- (UINT8)PortMultiplierPort,
- NULL,
- 0,
- FALSE,
- Packet->Acb,
- Packet->Asb,
- Packet->OutDataBuffer,
- Packet->OutTransferLength,
- Packet->Timeout,
- Task
- );
- break;
- default:
- return EFI_UNSUPPORTED;
- }
-
- break;
-
- default:
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- return Status;
-}
-
-/**
- Call back function when the timer event is signaled.
-
- @param[in] Event The Event this notify function registered to.
- @param[in] Context Pointer to the context data registered to the
- Event.
-
-**/
-VOID
-EFIAPI
-AsyncNonBlockingTransferRoutine (
- EFI_EVENT Event,
- VOID *Context
- )
-{
- LIST_ENTRY *Entry;
- LIST_ENTRY *EntryHeader;
- ATA_NONBLOCK_TASK *Task;
- EFI_STATUS Status;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
-
- Instance = (ATA_ATAPI_PASS_THRU_INSTANCE *)Context;
- EntryHeader = &Instance->NonBlockingTaskList;
- //
- // Get the Tasks from the Tasks List and execute it, until there is
- // no task in the list or the device is busy with task (EFI_NOT_READY).
- //
- while (TRUE) {
- if (!IsListEmpty (EntryHeader)) {
- Entry = GetFirstNode (EntryHeader);
- Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (Entry);
- } else {
- return;
- }
-
- Status = AtaPassThruPassThruExecute (
- Task->Port,
- Task->PortMultiplier,
- Task->Packet,
- Instance,
- Task
- );
-
- //
- // If the data transfer meet a error, remove all tasks in the list since these tasks are
- // associated with one task from Ata Bus and signal the event with error status.
- //
- if ((Status != EFI_NOT_READY) && (Status != EFI_SUCCESS)) {
- DestroyAsynTaskList (Instance, TRUE);
- break;
- }
-
- //
- // For Non blocking mode, the Status of EFI_NOT_READY means the operation
- // is not finished yet. Otherwise the operation is successful.
- //
- if (Status == EFI_NOT_READY) {
- break;
- } else {
- RemoveEntryList (&Task->Link);
- gBS->SignalEvent (Task->Event);
- FreePool (Task);
- }
- }
-}
-
-/**
- The Entry Point of module.
-
- @param[in] ImageHandle The firmware allocated handle for the EFI image.
- @param[in] SystemTable A pointer to the EFI System Table.
-
- @retval EFI_SUCCESS The entry point is executed successfully.
- @retval other Some error occurs when executing this entry point.
-
-**/
-EFI_STATUS
-EFIAPI
-InitializeAtaAtapiPassThru (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
-
- //
- // Install driver model protocol(s).
- //
- Status = EfiLibInstallDriverBindingComponentName2 (
- ImageHandle,
- SystemTable,
- &gAtaAtapiPassThruDriverBinding,
- ImageHandle,
- &gAtaAtapiPassThruComponentName,
- &gAtaAtapiPassThruComponentName2
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
-
-/**
- Tests to see if this driver supports a given controller. If a child device is provided,
- it further tests to see if this driver supports creating a handle for the specified child device.
-
- This function checks to see if the driver specified by This supports the device specified by
- ControllerHandle. Drivers will typically use the device path attached to
- ControllerHandle and/or the services from the bus I/O abstraction attached to
- ControllerHandle to determine if the driver supports ControllerHandle. This function
- may be called many times during platform initialization. In order to reduce boot times, the tests
- performed by this function must be very small, and take as little time as possible to execute. This
- function must not change the state of any hardware devices, and this function must be aware that the
- device specified by ControllerHandle may already be managed by the same driver or a
- different driver. This function must match its calls to AllocatePages() with FreePages(),
- AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
- Because ControllerHandle may have been previously started by the same driver, if a protocol is
- already in the opened state, then it must not be closed with CloseProtocol(). This is required
- to guarantee the state of ControllerHandle is not modified by this function.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to test. This handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For bus drivers, if this parameter is not NULL, then
- the bus driver must determine if the bus controller specified
- by ControllerHandle and the child controller specified
- by RemainingDevicePath are both supported by this
- bus driver.
-
- @retval EFI_SUCCESS The device specified by ControllerHandle and
- RemainingDevicePath is supported by the driver specified by This.
- @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by the driver
- specified by This.
- @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by a different
- driver or an application that requires exclusive access.
- Currently not implemented.
- @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
- RemainingDevicePath is not supported by the driver specified by This.
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
- EFI_PCI_IO_PROTOCOL *PciIo;
- PCI_TYPE00 PciData;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
-
- //
- // SATA Controller is a device driver, and should ignore the
- // "RemainingDevicePath" according to UEFI spec
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- (VOID *)&ParentDevicePath,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR (Status)) {
- //
- // EFI_ALREADY_STARTED is also an error
- //
- return Status;
- }
-
- //
- // Close the protocol because we don't use it here
- //
- gBS->CloseProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- (VOID **)&IdeControllerInit,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
-
- if (EFI_ERROR (Status)) {
- //
- // EFI_ALREADY_STARTED is also an error
- //
- return Status;
- }
-
- //
- // Close the I/O Abstraction(s) used to perform the supported test
- //
- gBS->CloseProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- //
- // Now test the EfiPciIoProtocol
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- (VOID **)&PciIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Now further check the PCI header: Base class (offset 0x0B) and
- // Sub Class (offset 0x0A). This controller should be an ATA controller
- //
- Status = PciIo->Pci.Read (
- PciIo,
- EfiPciIoWidthUint8,
- PCI_CLASSCODE_OFFSET,
- sizeof (PciData.Hdr.ClassCode),
- PciData.Hdr.ClassCode
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
- return EFI_SUCCESS;
- }
-
- return EFI_UNSUPPORTED;
-}
-
-/**
- Starts a device controller or a bus controller.
-
- The Start() function is designed to be invoked from the EFI boot service ConnectController().
- As a result, much of the error checking on the parameters to Start() has been moved into this
- common boot service. It is legal to call Start() from other locations,
- but the following calling restrictions must be followed, or the system behavior will not be deterministic.
- 1. ControllerHandle must be a valid EFI_HANDLE.
- 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
- EFI_DEVICE_PATH_PROTOCOL.
- 3. Prior to calling Start(), the Supported() function for the driver specified by This must
- have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to start. This handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For a bus driver, if this parameter is NULL, then handles
- for all the children of Controller are created by this driver.
- If this parameter is not NULL and the first Device Path Node is
- not the End of Device Path Node, then only the handle for the
- child device specified by the first Device Path Node of
- RemainingDevicePath is created by this driver.
- If the first Device Path Node of RemainingDevicePath is
- the End of Device Path Node, no child handle is created by this
- driver.
-
- @retval EFI_SUCCESS The device was started.
- @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failed to start the device.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT64 EnabledPciAttributes;
- UINT64 OriginalPciAttributes;
-
- Status = EFI_SUCCESS;
- IdeControllerInit = NULL;
- Instance = NULL;
- OriginalPciAttributes = 0;
-
- DEBUG ((DEBUG_INFO, "==AtaAtapiPassThru Start== Controller = %x\n", Controller));
-
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- (VOID **)&IdeControllerInit,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Open Ide_Controller_Init Error, Status=%r", Status));
- goto ErrorExit;
- }
-
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- (VOID **)&PciIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Get Pci_Io Protocol Error, Status=%r", Status));
- goto ErrorExit;
- }
-
- Status = PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationGet,
- 0,
- &OriginalPciAttributes
- );
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- Status = PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationSupported,
- 0,
- &EnabledPciAttributes
- );
- if (!EFI_ERROR (Status)) {
- EnabledPciAttributes &= (UINT64)EFI_PCI_DEVICE_ENABLE;
- Status = PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationEnable,
- EnabledPciAttributes,
- NULL
- );
- }
-
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- Status = gBS->LocateProtocol (&gEdkiiAtaAtapiPolicyProtocolGuid, NULL, (VOID **)&mAtaAtapiPolicy);
- if (EFI_ERROR (Status)) {
- //
- // If there is no AtaAtapiPolicy exposed, use the default policy.
- //
- mAtaAtapiPolicy = &mDefaultAtaAtapiPolicy;
- }
-
- //
- // Allocate a buffer to store the ATA_ATAPI_PASS_THRU_INSTANCE data structure
- //
- Instance = AllocateCopyPool (sizeof (ATA_ATAPI_PASS_THRU_INSTANCE), &gAtaAtapiPassThruInstanceTemplate);
- if (Instance == NULL) {
- goto ErrorExit;
- }
-
- Instance->ControllerHandle = Controller;
- Instance->IdeControllerInit = IdeControllerInit;
- Instance->PciIo = PciIo;
- Instance->EnabledPciAttributes = EnabledPciAttributes;
- Instance->OriginalPciAttributes = OriginalPciAttributes;
- Instance->AtaPassThru.Mode = &Instance->AtaPassThruMode;
- Instance->ExtScsiPassThru.Mode = &Instance->ExtScsiPassThruMode;
- InitializeListHead (&Instance->DeviceList);
- InitializeListHead (&Instance->NonBlockingTaskList);
-
- Instance->TimerEvent = NULL;
-
- Status = gBS->CreateEvent (
- EVT_TIMER | EVT_NOTIFY_SIGNAL,
- TPL_NOTIFY,
- AsyncNonBlockingTransferRoutine,
- Instance,
- &Instance->TimerEvent
- );
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- //
- // Set 1ms timer.
- //
- Status = gBS->SetTimer (Instance->TimerEvent, TimerPeriodic, 10000);
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- //
- // Enumerate all inserted ATA devices.
- //
- Status = EnumerateAttachedDevice (Instance);
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &Controller,
- &gEfiAtaPassThruProtocolGuid,
- &(Instance->AtaPassThru),
- &gEfiExtScsiPassThruProtocolGuid,
- &(Instance->ExtScsiPassThru),
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-
-ErrorExit:
- if (IdeControllerInit != NULL) {
- gBS->CloseProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
- }
-
- if ((Instance != NULL) && (Instance->TimerEvent != NULL)) {
- gBS->CloseEvent (Instance->TimerEvent);
- }
-
- if (Instance != NULL) {
- //
- // Remove all inserted ATA devices.
- //
- DestroyDeviceInfoList (Instance);
- FreePool (Instance);
- }
-
- return EFI_UNSUPPORTED;
-}
-
-/**
- Stops a device controller or a bus controller.
-
- The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
- As a result, much of the error checking on the parameters to Stop() has been moved
- into this common boot service. It is legal to call Stop() from other locations,
- but the following calling restrictions must be followed, or the system behavior will not be deterministic.
- 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
- same driver's Start() function.
- 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
- EFI_HANDLE. In addition, all of these handles must have been created in this driver's
- Start() function, and the Start() function must have called OpenProtocol() on
- ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle A handle to the device being stopped. The handle must
- support a bus specific I/O protocol for the driver
- to use to stop the device.
- @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
- @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
- if NumberOfChildren is 0.
-
- @retval EFI_SUCCESS The device was stopped.
- @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-{
- EFI_STATUS Status;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_AHCI_REGISTERS *AhciRegisters;
-
- DEBUG ((DEBUG_INFO, "==AtaAtapiPassThru Stop== Controller = %x\n", Controller));
-
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiAtaPassThruProtocolGuid,
- (VOID **)&AtaPassThru,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
-
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (AtaPassThru);
-
- Status = gBS->UninstallMultipleProtocolInterfaces (
- Controller,
- &gEfiAtaPassThruProtocolGuid,
- &(Instance->AtaPassThru),
- &gEfiExtScsiPassThruProtocolGuid,
- &(Instance->ExtScsiPassThru),
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Close protocols opened by AtaAtapiPassThru controller driver
- //
- gBS->CloseProtocol (
- Controller,
- &gEfiIdeControllerInitProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- //
- // Close Non-Blocking timer and free Task list.
- //
- if (Instance->TimerEvent != NULL) {
- gBS->CloseEvent (Instance->TimerEvent);
- Instance->TimerEvent = NULL;
- }
-
- DestroyAsynTaskList (Instance, FALSE);
- //
- // Free allocated resource
- //
- DestroyDeviceInfoList (Instance);
-
- PciIo = Instance->PciIo;
-
- //
- // Disable this ATA host controller.
- //
- PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationDisable,
- Instance->EnabledPciAttributes,
- NULL
- );
-
- //
- // If the current working mode is AHCI mode, then pre-allocated resource
- // for AHCI initialization should be released.
- //
- if (Instance->Mode == EfiAtaAhciMode) {
- AhciRegisters = &Instance->AhciRegisters;
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapCommandTable
- );
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxCommandTableSize),
- AhciRegisters->AhciCommandTable
- );
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapCmdList
- );
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxCommandListSize),
- AhciRegisters->AhciCmdList
- );
- PciIo->Unmap (
- PciIo,
- AhciRegisters->MapRFis
- );
- PciIo->FreeBuffer (
- PciIo,
- EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxReceiveFisSize),
- AhciRegisters->AhciRFis
- );
- }
-
- //
- // Restore original PCI attributes
- //
- Status = PciIo->Attributes (
- PciIo,
- EfiPciIoAttributeOperationSet,
- Instance->OriginalPciAttributes,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- FreePool (Instance);
-
- return Status;
-}
-
-/**
- Traverse the attached ATA devices list to find out the device to access.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in] DeviceType The device type of the ATA device.
-
- @retval The pointer to the data structure of the device info to access.
-
-**/
-LIST_ENTRY *
-EFIAPI
-SearchDeviceInfoList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT16 Port,
- IN UINT16 PortMultiplier,
- IN EFI_ATA_DEVICE_TYPE DeviceType
- )
-{
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- LIST_ENTRY *Node;
-
- Node = GetFirstNode (&Instance->DeviceList);
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- //
- // For CD-ROM working in the AHCI mode, only 8 bits are used to record
- // the PortMultiplier information. If the CD-ROM is directly attached
- // on a SATA port, the PortMultiplier should be translated from 0xFF
- // to 0xFFFF according to the UEFI spec.
- //
- if ((Instance->Mode == EfiAtaAhciMode) &&
- (DeviceInfo->Type == EfiIdeCdrom) &&
- (PortMultiplier == 0xFF))
- {
- PortMultiplier = 0xFFFF;
- }
-
- if ((DeviceInfo->Type == DeviceType) &&
- (Port == DeviceInfo->Port) &&
- (PortMultiplier == DeviceInfo->PortMultiplier))
- {
- return Node;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return NULL;
-}
-
-/**
- Allocate device info data structure to contain device info.
- And insert the data structure to the tail of device list for tracing.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in] DeviceType The device type of the ATA device.
- @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
-
- @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
- @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateNewDeviceInfo (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT16 Port,
- IN UINT16 PortMultiplier,
- IN EFI_ATA_DEVICE_TYPE DeviceType,
- IN EFI_IDENTIFY_DATA *IdentifyData
- )
-{
- EFI_ATA_DEVICE_INFO *DeviceInfo;
-
- DeviceInfo = AllocateZeroPool (sizeof (EFI_ATA_DEVICE_INFO));
-
- if (DeviceInfo == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- DeviceInfo->Signature = ATA_ATAPI_DEVICE_SIGNATURE;
- DeviceInfo->Port = Port;
- DeviceInfo->PortMultiplier = PortMultiplier;
- DeviceInfo->Type = DeviceType;
-
- if (IdentifyData != NULL) {
- DeviceInfo->IdentifyData = AllocateCopyPool (sizeof (EFI_IDENTIFY_DATA), IdentifyData);
- if (DeviceInfo->IdentifyData == NULL) {
- FreePool (DeviceInfo);
- return EFI_OUT_OF_RESOURCES;
- }
- }
-
- InsertTailList (&Instance->DeviceList, &DeviceInfo->Link);
-
- return EFI_SUCCESS;
-}
-
-/**
- Destroy all attached ATA devices info.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-VOID
-EFIAPI
-DestroyDeviceInfoList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- )
-{
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- LIST_ENTRY *Node;
-
- Node = GetFirstNode (&Instance->DeviceList);
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- Node = GetNextNode (&Instance->DeviceList, Node);
-
- RemoveEntryList (&DeviceInfo->Link);
- if (DeviceInfo->IdentifyData != NULL) {
- FreePool (DeviceInfo->IdentifyData);
- }
-
- FreePool (DeviceInfo);
- }
-}
-
-/**
- Destroy all pending non blocking tasks.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] IsSigEvent Indicate whether signal the task event when remove the
- task.
-
-**/
-VOID
-EFIAPI
-DestroyAsynTaskList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN BOOLEAN IsSigEvent
- )
-{
- LIST_ENTRY *Entry;
- LIST_ENTRY *DelEntry;
- ATA_NONBLOCK_TASK *Task;
- EFI_TPL OldTpl;
-
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- if (!IsListEmpty (&Instance->NonBlockingTaskList)) {
- //
- // Free the Subtask list.
- //
- for (Entry = (&Instance->NonBlockingTaskList)->ForwardLink;
- Entry != (&Instance->NonBlockingTaskList);
- )
- {
- DelEntry = Entry;
- Entry = Entry->ForwardLink;
- Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (DelEntry);
-
- RemoveEntryList (DelEntry);
- if (IsSigEvent) {
- Task->Packet->Asb->AtaStatus = 0x01;
- gBS->SignalEvent (Task->Event);
- }
-
- FreePool (Task);
- }
- }
-
- gBS->RestoreTPL (OldTpl);
-}
-
-/**
- Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
-
- The function is designed to enumerate all attached ATA devices.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
- @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
- @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-EnumerateAttachedDevice (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- PCI_TYPE00 PciData;
- UINT8 ClassCode;
-
- Status = EFI_SUCCESS;
-
- Status = Instance->PciIo->Pci.Read (
- Instance->PciIo,
- EfiPciIoWidthUint8,
- PCI_CLASSCODE_OFFSET,
- sizeof (PciData.Hdr.ClassCode),
- PciData.Hdr.ClassCode
- );
- ASSERT_EFI_ERROR (Status);
-
- ClassCode = PciData.Hdr.ClassCode[1];
-
- switch (ClassCode) {
- case PCI_CLASS_MASS_STORAGE_IDE:
- //
- // The ATA controller is working at IDE mode
- //
- Instance->Mode = EfiAtaIdeMode;
-
- Status = IdeModeInitialization (Instance);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Done;
- }
-
- break;
- case PCI_CLASS_MASS_STORAGE_SATADPA:
- //
- // The ATA controller is working at AHCI mode
- //
- Instance->Mode = EfiAtaAhciMode;
-
- Status = AhciModeInitialization (Instance);
-
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Done;
- }
-
- break;
- default:
- Status = EFI_UNSUPPORTED;
- }
-
-Done:
- return Status;
-}
-
-/**
- Sends an ATA command to an ATA device that is attached to the ATA controller. This function
- supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
- and the non-blocking I/O functionality is optional.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
- and PortMultiplierPort.
- @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
- I/O is performed. If Event is NULL, then blocking I/O is performed. If
- Event is not NULL and non blocking I/O is supported, then non-blocking
- I/O is performed, and Event will be signaled when the ATA command completes.
-
- @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
- InTransferLength bytes were transferred from InDataBuffer. For write and
- bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
- @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
- is returned in InTransferLength. For write and bi-directional commands,
- OutTransferLength bytes were transferred by OutDataBuffer.
- @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
- already queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
- @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
- command was not sent, so no additional status information is available.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruPassThru (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort,
- IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
- IN EFI_EVENT Event OPTIONAL
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- EFI_IDENTIFY_DATA *IdentifyData;
- UINT64 Capacity;
- UINT32 MaxSectorCount;
- ATA_NONBLOCK_TASK *Task;
- EFI_TPL OldTpl;
- UINT32 BlockSize;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->InDataBuffer, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->OutDataBuffer, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->Asb, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
-
- if (Node == NULL) {
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeCdrom);
- if (Node == NULL) {
- return EFI_INVALID_PARAMETER;
- }
- }
-
- //
- // Check whether this device needs 48-bit addressing (ATAPI-6 ata device).
- // Per ATA-6 spec, word83: bit15 is zero and bit14 is one.
- // If bit10 is one, it means the ata device support 48-bit addressing.
- //
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
- IdentifyData = DeviceInfo->IdentifyData;
- MaxSectorCount = 0x100;
- if ((IdentifyData->AtaData.command_set_supported_83 & (BIT10 | BIT15 | BIT14)) == 0x4400) {
- Capacity = *((UINT64 *)IdentifyData->AtaData.maximum_lba_for_48bit_addressing);
- if (Capacity > 0xFFFFFFF) {
- //
- // Capacity exceeds 120GB. 48-bit addressing is really needed
- // In this case, the max sector count is 0x10000
- //
- MaxSectorCount = 0x10000;
- }
- }
-
- BlockSize = 0x200;
- if ((IdentifyData->AtaData.phy_logic_sector_support & (BIT14 | BIT15)) == BIT14) {
- //
- // Check logical block size
- //
- if ((IdentifyData->AtaData.phy_logic_sector_support & BIT12) != 0) {
- BlockSize = (UINT32)(((UINT32)(IdentifyData->AtaData.logic_sector_size_hi << 16) | IdentifyData->AtaData.logic_sector_size_lo) * sizeof (UINT16));
- }
- }
-
- //
- // convert the transfer length from sector count to byte.
- //
- if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
- (Packet->InTransferLength != 0))
- {
- Packet->InTransferLength = Packet->InTransferLength * BlockSize;
- }
-
- //
- // convert the transfer length from sector count to byte.
- //
- if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) &&
- (Packet->OutTransferLength != 0))
- {
- Packet->OutTransferLength = Packet->OutTransferLength * BlockSize;
- }
-
- //
- // If the data buffer described by InDataBuffer/OutDataBuffer and InTransferLength/OutTransferLength
- // is too big to be transferred in a single command, then no data is transferred and EFI_BAD_BUFFER_SIZE
- // is returned.
- //
- if (((Packet->InTransferLength != 0) && (Packet->InTransferLength > MaxSectorCount * BlockSize)) ||
- ((Packet->OutTransferLength != 0) && (Packet->OutTransferLength > MaxSectorCount * BlockSize)))
- {
- return EFI_BAD_BUFFER_SIZE;
- }
-
- //
- // For non-blocking mode, queue the Task into the list.
- //
- if (Event != NULL) {
- Task = AllocateZeroPool (sizeof (ATA_NONBLOCK_TASK));
- if (Task == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Task->Signature = ATA_NONBLOCKING_TASK_SIGNATURE;
- Task->Port = Port;
- Task->PortMultiplier = PortMultiplierPort;
- Task->Packet = Packet;
- Task->Event = Event;
- Task->IsStart = FALSE;
- Task->RetryTimes = DivU64x32 (Packet->Timeout, 1000) + 1;
- if (Packet->Timeout == 0) {
- Task->InfiniteWait = TRUE;
- } else {
- Task->InfiniteWait = FALSE;
- }
-
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- InsertTailList (&Instance->NonBlockingTaskList, &Task->Link);
- gBS->RestoreTPL (OldTpl);
-
- return EFI_SUCCESS;
- } else {
- return AtaPassThruPassThruExecute (
- Port,
- PortMultiplierPort,
- Packet,
- Instance,
- NULL
- );
- }
-}
-
-/**
- Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
- These can either be the list of ports where ATA devices are actually present or the
- list of legal port numbers for the ATA controller. Regardless, the caller of this
- function must probe the port number returned to see if an ATA device is actually
- present at that location on the ATA controller.
-
- The GetNextPort() function retrieves the port number on an ATA controller. If on input
- Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
- in Port and EFI_SUCCESS is returned.
-
- If Port is a port number that was returned on a previous call to GetNextPort(), then the
- port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
- is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
- GetNextPort(), then EFI_INVALID_PARAMETER is returned.
-
- If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
- returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in, out] Port On input, a pointer to the port number on the ATA controller.
- On output, a pointer to the next port number on the ATA
- controller. An input value of 0xFFFF retrieves the first port
- number on the ATA controller.
-
- @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
- @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
- @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
- to GetNextPort().
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetNextPort (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN OUT UINT16 *Port
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if (Port == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (*Port == 0xFFFF) {
- //
- // If the Port is all 0xFF's, start to traverse the device list from the beginning
- //
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if (DeviceInfo->Type == EfiIdeHarddisk) {
- *Port = DeviceInfo->Port;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else if (*Port == Instance->PreviousPort) {
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if ((DeviceInfo->Type == EfiIdeHarddisk) &&
- (DeviceInfo->Port > *Port))
- {
- *Port = DeviceInfo->Port;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else {
- //
- // Port is not equal to 0xFFFF and also not equal to previous return value
- //
- return EFI_INVALID_PARAMETER;
- }
-
-Exit:
- //
- // Update the PreviousPort and PreviousPortMultiplier.
- //
- Instance->PreviousPort = *Port;
-
- return EFI_SUCCESS;
-}
-
-/**
- Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
- controller. These can either be the list of port multiplier ports where ATA devices are actually
- present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
- function must probe the port number and port multiplier port number returned to see if an ATA
- device is actually present.
-
- The GetNextDevice() function retrieves the port multiplier port number of an ATA device
- present on a port of an ATA controller.
-
- If PortMultiplierPort points to a port multiplier port number value that was returned on a
- previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
- on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
- returned.
-
- If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
- ATA device on port of the ATA controller is returned in PortMultiplierPort and
- EFI_SUCCESS is returned.
-
- If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
- was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
- is returned.
-
- If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
- the ATA controller, then EFI_NOT_FOUND is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number present on the ATA controller.
- @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
- ATA device present on the ATA controller.
- If on input a PortMultiplierPort of 0xFFFF is specified,
- then the port multiplier port number of the first ATA device
- is returned. On output, a pointer to the port multiplier port
- number of the next ATA device present on an ATA controller.
-
- @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
- of the ATA controller was returned in PortMultiplierPort.
- @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
- @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
- returned on a previous call to GetNextDevice().
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetNextDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN OUT UINT16 *PortMultiplierPort
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if (PortMultiplierPort == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Instance->PreviousPortMultiplier == 0xFFFF) {
- //
- // If a device is directly attached on a port, previous call to this
- // function will return the value 0xFFFF for PortMultiplierPort. In
- // this case, there should be no more device on the port multiplier.
- //
- Instance->PreviousPortMultiplier = 0;
- return EFI_NOT_FOUND;
- }
-
- if (*PortMultiplierPort == Instance->PreviousPortMultiplier) {
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if ((DeviceInfo->Type == EfiIdeHarddisk) &&
- (DeviceInfo->Port == Port) &&
- (DeviceInfo->PortMultiplier > *PortMultiplierPort))
- {
- *PortMultiplierPort = DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else if (*PortMultiplierPort == 0xFFFF) {
- //
- // If the PortMultiplierPort is all 0xFF's, start to traverse the device list from the beginning
- //
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if ((DeviceInfo->Type == EfiIdeHarddisk) &&
- (DeviceInfo->Port == Port))
- {
- *PortMultiplierPort = DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else {
- //
- // PortMultiplierPort is not equal to 0xFFFF and also not equal to previous return value
- //
- return EFI_INVALID_PARAMETER;
- }
-
-Exit:
- //
- // Update the PreviousPort and PreviousPortMultiplier.
- //
- Instance->PreviousPortMultiplier = *PortMultiplierPort;
-
- return EFI_SUCCESS;
-}
-
-/**
- Used to allocate and build a device path node for an ATA device on an ATA controller.
-
- The BuildDevicePath() function allocates and builds a single device node for the ATA
- device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
- PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
- If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
- resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
-
- Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
- DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
- and EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port Port specifies the port number of the ATA device for which a
- device path node is to be allocated and built.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
- device path node is to be allocated and built. If there is no
- port multiplier, then specify 0xFFFF.
- @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
- device specified by Port and PortMultiplierPort. This function
- is responsible for allocating the buffer DevicePath with the
- boot service AllocatePool(). It is the caller's responsibility
- to free DevicePath when the caller is finished with DevicePath.
- @retval EFI_SUCCESS The device path node that describes the ATA device specified by
- Port and PortMultiplierPort was allocated and returned in DevicePath.
- @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
- exist on the ATA controller.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruBuildDevicePath (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
- )
-{
- EFI_DEV_PATH *DevicePathNode;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- //
- // Validate parameters passed in.
- //
- if (DevicePath == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
- if (Node == NULL) {
- return EFI_NOT_FOUND;
- }
-
- if (Instance->Mode == EfiAtaIdeMode) {
- DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
- if (DevicePathNode == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- DevicePathNode->Atapi.PrimarySecondary = (UINT8)Port;
- DevicePathNode->Atapi.SlaveMaster = (UINT8)PortMultiplierPort;
- DevicePathNode->Atapi.Lun = 0;
- } else {
- DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
- if (DevicePathNode == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- DevicePathNode->Sata.HBAPortNumber = Port;
- DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplierPort;
- DevicePathNode->Sata.Lun = 0;
- }
-
- *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePathNode;
-
- return EFI_SUCCESS;
-}
-
-/**
- Used to translate a device path node to a port number and port multiplier port number.
-
- The GetDevice() function determines the port and port multiplier port number associated with
- the ATA device described by DevicePath. If DevicePath is a device path node type that the
- ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
- DevicePath into a port number and port multiplier port number.
-
- If this translation is successful, then that port number and port multiplier port number are returned
- in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
-
- If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
-
- If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
- EFI_UNSUPPORTED is returned.
-
- If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
- a valid translation from DevicePath to a port number and port multiplier port number, then
- EFI_NOT_FOUND is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
- ATA controller.
- @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
- @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
- on the ATA controller.
-
- @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
- port number, and they were returned in Port and PortMultiplierPort.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_INVALID_PARAMETER Port is NULL.
- @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
- @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
- @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
- port number does not exist.
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT16 *Port,
- OUT UINT16 *PortMultiplierPort
- )
-{
- EFI_DEV_PATH *DevicePathNode;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- //
- // Validate parameters passed in.
- //
- if ((DevicePath == NULL) || (Port == NULL) || (PortMultiplierPort == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check whether the DevicePath belongs to SCSI_DEVICE_PATH or ATAPI_DEVICE_PATH
- //
- if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
- ((DevicePath->SubType != MSG_SATA_DP) &&
- (DevicePath->SubType != MSG_ATAPI_DP)) ||
- ((DevicePathNodeLength (DevicePath) != sizeof (ATAPI_DEVICE_PATH)) &&
- (DevicePathNodeLength (DevicePath) != sizeof (SATA_DEVICE_PATH))))
- {
- return EFI_UNSUPPORTED;
- }
-
- DevicePathNode = (EFI_DEV_PATH *)DevicePath;
-
- if (Instance->Mode == EfiAtaIdeMode) {
- *Port = DevicePathNode->Atapi.PrimarySecondary;
- *PortMultiplierPort = DevicePathNode->Atapi.SlaveMaster;
- } else {
- *Port = DevicePathNode->Sata.HBAPortNumber;
- *PortMultiplierPort = DevicePathNode->Sata.PortMultiplierPortNumber;
- }
-
- Node = SearchDeviceInfoList (Instance, *Port, *PortMultiplierPort, EfiIdeHarddisk);
-
- if (Node == NULL) {
- return EFI_NOT_FOUND;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Resets a specific port on the ATA controller. This operation also resets all the ATA devices
- connected to the port.
-
- The ResetChannel() function resets an a specific port on an ATA controller. This operation
- resets all the ATA devices connected to that port. If this ATA controller does not support
- a reset port operation, then EFI_UNSUPPORTED is returned.
-
- If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
- returned.
-
- If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
-
- If the port reset operation is completed, then EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number on the ATA controller.
-
- @retval EFI_SUCCESS The ATA controller port was reset.
- @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruResetPort (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port
- )
-{
- //
- // Return success directly then upper layer driver could think reset port operation is done.
- //
- return EFI_SUCCESS;
-}
-
-/**
- Resets an ATA device that is connected to an ATA controller.
-
- The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
- If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
- returned.
-
- If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
- EFI_INVALID_PARAMETER is returned.
-
- If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
- is returned.
-
- If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
- returned.
-
- If the device reset operation is completed, then EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port Port represents the port number of the ATA device to be reset.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
- If there is no port multiplier, then specify 0xFFFF.
- @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
- @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
- @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
- specified by Port and PortMultiplierPort.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
- specified by Port and PortMultiplierPort.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruResetDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk);
-
- if (Node == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Return success directly then upper layer driver could think reset device operation is done.
- //
- return EFI_SUCCESS;
-}
-
-/**
- Submit ATAPI request sense command.
-
- @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param[in] Target The Target is an array of size TARGET_MAX_BYTES and it represents
- the id of the SCSI device to send the SCSI Request Packet. Each
- transport driver may choose to utilize a subset of this size to suit the needs
- of transport target representation. For example, a Fibre Channel driver
- may use only 8 bytes (WWN) to represent an FC target.
- @param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet.
- @param[in] SenseData A pointer to store sense data.
- @param[in] SenseDataLength The sense data length.
- @param[in] Timeout The timeout value to execute this cmd, uses 100ns as a unit.
-
- @retval EFI_SUCCESS Send out the ATAPI packet command successfully.
- @retval EFI_DEVICE_ERROR The device failed to send data.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPacketRequestSense (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun,
- IN VOID *SenseData,
- IN UINT8 SenseDataLength,
- IN UINT64 Timeout
- )
-{
- EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET Packet;
- UINT8 Cdb[12];
- EFI_STATUS Status;
-
- ZeroMem (&Packet, sizeof (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));
- ZeroMem (Cdb, 12);
-
- Cdb[0] = ATA_CMD_REQUEST_SENSE;
- Cdb[4] = SenseDataLength;
-
- Packet.Timeout = Timeout;
- Packet.Cdb = Cdb;
- Packet.CdbLength = 12;
- Packet.DataDirection = EFI_EXT_SCSI_DATA_DIRECTION_READ;
- Packet.InDataBuffer = SenseData;
- Packet.InTransferLength = SenseDataLength;
-
- Status = ExtScsiPassThruPassThru (This, Target, Lun, &Packet, NULL);
-
- return Status;
-}
-
-/**
- Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
- supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
- nonblocking I/O functionality is optional.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
- the id of the SCSI device to send the SCSI Request Packet. Each
- transport driver may choose to utilize a subset of this size to suit the needs
- of transport target representation. For example, a Fibre Channel driver
- may use only 8 bytes (WWN) to represent an FC target.
- @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
- @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
- specified by Target and Lun.
- @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
- I/O is performed. If Event is NULL, then blocking I/O is performed. If
- Event is not NULL and non blocking I/O is supported, then
- nonblocking I/O is performed, and Event will be signaled when the
- SCSI Request Packet completes.
-
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
- commands, InTransferLength bytes were transferred from
- InDataBuffer. For write and bi-directional commands,
- OutTransferLength bytes were transferred by
- OutDataBuffer.
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
- could be transferred is returned in InTransferLength. For write
- and bi-directional commands, OutTransferLength bytes were
- transferred by OutDataBuffer.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
- SCSI Request Packets already queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
- Packet.
- @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
- by the host adapter. This includes the case of Bi-directional SCSI
- commands not supported by the implementation. The SCSI Request
- Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruPassThru (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun,
- IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
- IN EFI_EVENT Event OPTIONAL
- )
-{
- EFI_STATUS Status;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- UINT8 Port;
- UINT8 PortMultiplier;
- EFI_ATA_HC_WORK_MODE Mode;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- BOOLEAN SenseReq;
- EFI_SCSI_SENSE_DATA *PtrSenseData;
- UINTN SenseDataLen;
- EFI_STATUS SenseStatus;
-
- SenseDataLen = 0;
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if ((Packet == NULL) || (Packet->Cdb == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Don't support variable length CDB
- //
- if ((Packet->CdbLength != 6) && (Packet->CdbLength != 10) &&
- (Packet->CdbLength != 12) && (Packet->CdbLength != 16))
- {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Packet->SenseDataLength != 0) && (Packet->SenseData == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->InDataBuffer, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->OutDataBuffer, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->SenseData, This->Mode->IoAlign)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // For ATAPI device, doesn't support multiple LUN device.
- //
- if (Lun != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // The layout of Target array:
- // ________________________________________________________________________
- // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
- // |_____________________|_____________________|_____|______________________|
- // | | The port multiplier | | |
- // | The port number | port number | N/A | N/A |
- // |_____________________|_____________________|_____|______________________|
- //
- // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
- //
- Port = Target[0];
- PortMultiplier = Target[1];
-
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom);
- if (Node == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- //
- // ATA_CMD_IDENTIFY_DEVICE cmd is a ATA cmd but not a SCSI cmd.
- // Normally it should NOT be passed down through ExtScsiPassThru protocol interface.
- // But to response EFI_DISK_INFO.Identify() request from ScsiDisk, we should handle this command.
- //
- if (*((UINT8 *)Packet->Cdb) == ATA_CMD_IDENTIFY_DEVICE) {
- CopyMem (Packet->InDataBuffer, DeviceInfo->IdentifyData, sizeof (EFI_IDENTIFY_DATA));
- //
- // For IDENTIFY DEVICE cmd, we don't need to get sense data.
- //
- Packet->SenseDataLength = 0;
- return EFI_SUCCESS;
- }
-
- Mode = Instance->Mode;
- switch (Mode) {
- case EfiAtaIdeMode:
- //
- // Reassign IDE mode io port registers' base addresses
- //
- Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters);
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = AtaPacketCommandExecute (Instance->PciIo, &Instance->IdeRegisters[Port], Port, PortMultiplier, Packet);
- break;
- case EfiAtaAhciMode:
- if (PortMultiplier == 0xFF) {
- //
- // If there is no port multiplier, the PortMultiplier will be 0xFF
- // Here, we convert its value to 0 to follow the AHCI spec.
- //
- PortMultiplier = 0;
- }
-
- Status = AhciPacketCommandExecute (Instance->PciIo, &Instance->AhciRegisters, Port, PortMultiplier, Packet);
- break;
- default:
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- //
- // If the cmd doesn't get executed correctly, then check sense data.
- //
- if (EFI_ERROR (Status) && (Packet->SenseDataLength != 0) && (*((UINT8 *)Packet->Cdb) != ATA_CMD_REQUEST_SENSE)) {
- PtrSenseData = AllocateAlignedPages (EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)), This->Mode->IoAlign);
- if (PtrSenseData == NULL) {
- return EFI_DEVICE_ERROR;
- }
-
- for (SenseReq = TRUE; SenseReq;) {
- SenseStatus = AtaPacketRequestSense (
- This,
- Target,
- Lun,
- PtrSenseData,
- sizeof (EFI_SCSI_SENSE_DATA),
- Packet->Timeout
- );
- if (EFI_ERROR (SenseStatus)) {
- break;
- }
-
- CopyMem ((UINT8 *)Packet->SenseData + SenseDataLen, PtrSenseData, sizeof (EFI_SCSI_SENSE_DATA));
- SenseDataLen += sizeof (EFI_SCSI_SENSE_DATA);
-
- //
- // no more sense key or number of sense keys exceeds predefined,
- // skip the loop.
- //
- if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) ||
- (SenseDataLen + sizeof (EFI_SCSI_SENSE_DATA) > Packet->SenseDataLength))
- {
- SenseReq = FALSE;
- }
- }
-
- FreeAlignedPages (PtrSenseData, EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)));
- }
-
- //
- // Update the SenseDataLength field to the data length received.
- //
- Packet->SenseDataLength = (UINT8)SenseDataLen;
- return Status;
-}
-
-/**
- Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
- can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
- Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
- Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
- channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target On input, a pointer to the Target ID (an array of size
- TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
- On output, a pointer to the Target ID (an array of
- TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
- channel. An input value of 0xF(all bytes in the array are 0xF) in the
- Target array retrieves the Target ID of the first SCSI device present on a
- SCSI channel.
- @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
- channel. On output, a pointer to the LUN of the next SCSI device present
- on a SCSI channel.
-
- @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
- channel was returned in Target and Lun.
- @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
- not returned on a previous call to GetNextTargetLun().
- @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetNextTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN OUT UINT8 **Target,
- IN OUT UINT64 *Lun
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- UINT8 *Target8;
- UINT16 *Target16;
-
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if ((Target == NULL) || (Lun == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (*Target == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Target8 = *Target;
- Target16 = (UINT16 *)*Target;
-
- if (CompareMem (Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
- //
- // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
- // So the higher bytes in Target array should be 0xFF.
- //
- if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // When Target is not all 0xFF's, compare 2 least significant bytes with
- // previous target id to see if it is returned by previous call.
- //
- if ((*Target16 != Instance->PreviousTargetId) ||
- (*Lun != Instance->PreviousLun))
- {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Traverse the whole device list to find the next cdrom closed to
- // the device signified by Target[0] and Target[1].
- //
- // Note that we here use a tricky way to find the next cdrom :
- // All ata devices are detected and inserted into the device list
- // sequentially.
- //
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if ((DeviceInfo->Type == EfiIdeCdrom) &&
- ((Target8[0] < DeviceInfo->Port) ||
- ((Target8[0] == DeviceInfo->Port) &&
- (Target8[1] < (UINT8)DeviceInfo->PortMultiplier))))
- {
- Target8[0] = (UINT8)DeviceInfo->Port;
- Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else {
- //
- // If the array is all 0xFF's, start to traverse the device list from the beginning
- //
- Node = GetFirstNode (&Instance->DeviceList);
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if (DeviceInfo->Type == EfiIdeCdrom) {
- Target8[0] = (UINT8)DeviceInfo->Port;
- Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- }
-
-Exit:
- *Lun = 0;
-
- //
- // Update the PreviousTargetId.
- //
- Instance->PreviousTargetId = *Target16;
- Instance->PreviousLun = *Lun;
-
- return EFI_SUCCESS;
-}
-
-/**
- Used to allocate and build a device path node for a SCSI device on a SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
- Target ID of the SCSI device for which a device path node is to be
- allocated and built. Transport drivers may chose to utilize a subset of
- this size to suit the representation of targets. For example, a Fibre
- Channel driver may use only 8 bytes (WWN) in the array to represent a
- FC target.
- @param Lun The LUN of the SCSI device for which a device path node is to be
- allocated and built.
- @param DevicePath A pointer to a single device path node that describes the SCSI device
- specified by Target and Lun. This function is responsible for
- allocating the buffer DevicePath with the boot service
- AllocatePool(). It is the caller's responsibility to free
- DevicePath when the caller is finished with DevicePath.
-
- @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
- Target and Lun was allocated and returned in
- DevicePath.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
- on the SCSI channel.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruBuildDevicePath (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
- )
-{
- EFI_DEV_PATH *DevicePathNode;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- UINT8 Port;
- UINT8 PortMultiplier;
-
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- Port = Target[0];
- PortMultiplier = Target[1];
-
- //
- // Validate parameters passed in.
- //
- if (DevicePath == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // can not build device path for the SCSI Host Controller.
- //
- if (Lun != 0) {
- return EFI_NOT_FOUND;
- }
-
- if (SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom) == NULL) {
- return EFI_NOT_FOUND;
- }
-
- if (Instance->Mode == EfiAtaIdeMode) {
- DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate);
- if (DevicePathNode == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- DevicePathNode->Atapi.PrimarySecondary = Port;
- DevicePathNode->Atapi.SlaveMaster = PortMultiplier;
- DevicePathNode->Atapi.Lun = (UINT16)Lun;
- } else {
- DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate);
- if (DevicePathNode == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- DevicePathNode->Sata.HBAPortNumber = Port;
- //
- // For CD-ROM working in the AHCI mode, only 8 bits are used to record
- // the PortMultiplier information. If the CD-ROM is directly attached
- // on a SATA port, the PortMultiplier should be translated from 0xFF
- // to 0xFFFF according to the UEFI spec.
- //
- DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplier == 0xFF ? 0xFFFF : PortMultiplier;
- DevicePathNode->Sata.Lun = (UINT16)Lun;
- }
-
- *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePathNode;
-
- return EFI_SUCCESS;
-}
-
-/**
- Used to translate a device path node to a Target ID and LUN.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param DevicePath A pointer to a single device path node that describes the SCSI device
- on the SCSI channel.
- @param Target A pointer to the Target Array which represents the ID of a SCSI device
- on the SCSI channel.
- @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
-
- @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
- LUN, and they were returned in Target and Lun.
- @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
- @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
- does not exist.
- @retval EFI_UNSUPPORTED This driver does not support the device path node type in
- DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT8 **Target,
- OUT UINT64 *Lun
- )
-{
- EFI_DEV_PATH *DevicePathNode;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
-
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- //
- // Validate parameters passed in.
- //
- if ((DevicePath == NULL) || (Target == NULL) || (Lun == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (*Target == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check whether the DevicePath belongs to SCSI_DEVICE_PATH
- //
- if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
- ((DevicePath->SubType != MSG_ATAPI_DP) &&
- (DevicePath->SubType != MSG_SATA_DP)) ||
- ((DevicePathNodeLength (DevicePath) != sizeof (ATAPI_DEVICE_PATH)) &&
- (DevicePathNodeLength (DevicePath) != sizeof (SATA_DEVICE_PATH))))
- {
- return EFI_UNSUPPORTED;
- }
-
- SetMem (*Target, TARGET_MAX_BYTES, 0xFF);
-
- DevicePathNode = (EFI_DEV_PATH *)DevicePath;
-
- if (Instance->Mode == EfiAtaIdeMode) {
- (*Target)[0] = (UINT8)DevicePathNode->Atapi.PrimarySecondary;
- (*Target)[1] = (UINT8)DevicePathNode->Atapi.SlaveMaster;
- *Lun = (UINT8)DevicePathNode->Atapi.Lun;
- } else {
- (*Target)[0] = (UINT8)DevicePathNode->Sata.HBAPortNumber;
- (*Target)[1] = (UINT8)DevicePathNode->Sata.PortMultiplierPortNumber;
- *Lun = (UINT8)DevicePathNode->Sata.Lun;
- }
-
- Node = SearchDeviceInfoList (Instance, (*Target)[0], (*Target)[1], EfiIdeCdrom);
-
- if (Node == NULL) {
- return EFI_NOT_FOUND;
- }
-
- if (*Lun != 0) {
- return EFI_NOT_FOUND;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
-
- @retval EFI_SUCCESS The SCSI channel was reset.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
- @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruResetChannel (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
- )
-{
- //
- // Return success directly then upper layer driver could think reset channel operation is done.
- //
- return EFI_SUCCESS;
-}
-
-/**
- Resets a SCSI logical unit that is connected to a SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
- target port ID of the SCSI device containing the SCSI logical unit to
- reset. Transport drivers may chose to utilize a subset of this array to suit
- the representation of their targets.
- @param Lun The LUN of the SCSI device to reset.
-
- @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
- @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
- specified by Target and Lun.
- @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
- specified by Target and Lun.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruResetTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- UINT8 Port;
- UINT8 PortMultiplier;
-
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
- //
- // For ATAPI device, doesn't support multiple LUN device.
- //
- if (Lun != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // The layout of Target array:
- // ________________________________________________________________________
- // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 |
- // |_____________________|_____________________|_____|______________________|
- // | | The port multiplier | | |
- // | The port number | port number | N/A | N/A |
- // |_____________________|_____________________|_____|______________________|
- //
- // For ATAPI device, 2 bytes is enough to represent the location of SCSI device.
- //
- Port = Target[0];
- PortMultiplier = Target[1];
-
- Node = SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom);
- if (Node == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Return success directly then upper layer driver could think reset target LUN operation is done.
- //
- return EFI_SUCCESS;
-}
-
-/**
- Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
- be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
- for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
- see if a SCSI device is actually present at that location on the SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
- On output, a pointer to the Target ID (an array of
- TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
- channel. An input value of 0xF(all bytes in the array are 0xF) in the
- Target array retrieves the Target ID of the first SCSI device present on a
- SCSI channel.
-
- @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
- channel was returned in Target.
- @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
- @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
- returned on a previous call to GetNextTarget().
- @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetNextTarget (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN OUT UINT8 **Target
- )
-{
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
- LIST_ENTRY *Node;
- EFI_ATA_DEVICE_INFO *DeviceInfo;
- UINT8 *Target8;
- UINT16 *Target16;
-
- Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This);
-
- if ((Target == NULL) || (*Target == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- Target8 = *Target;
- Target16 = (UINT16 *)*Target;
-
- if (CompareMem (Target8, mScsiId, TARGET_MAX_BYTES) != 0) {
- //
- // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device.
- // So the higher bytes in Target array should be 0xFF.
- //
- if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // When Target is not all 0xFF's, compare 2 least significant bytes with
- // previous target id to see if it is returned by previous call.
- //
- if (*Target16 != Instance->PreviousTargetId) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Traverse the whole device list to find the next cdrom closed to
- // the device signified by Target[0] and Target[1].
- //
- // Note that we here use a tricky way to find the next cdrom :
- // All ata devices are detected and inserted into the device list
- // sequentially.
- //
- Node = GetFirstNode (&Instance->DeviceList);
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if ((DeviceInfo->Type == EfiIdeCdrom) &&
- ((Target8[0] < DeviceInfo->Port) ||
- ((Target8[0] == DeviceInfo->Port) &&
- (Target8[1] < (UINT8)DeviceInfo->PortMultiplier))))
- {
- Target8[0] = (UINT8)DeviceInfo->Port;
- Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- } else {
- //
- // If the array is all 0xFF's, start to traverse the device list from the beginning
- //
- Node = GetFirstNode (&Instance->DeviceList);
-
- while (!IsNull (&Instance->DeviceList, Node)) {
- DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node);
-
- if (DeviceInfo->Type == EfiIdeCdrom) {
- Target8[0] = (UINT8)DeviceInfo->Port;
- Target8[1] = (UINT8)DeviceInfo->PortMultiplier;
- goto Exit;
- }
-
- Node = GetNextNode (&Instance->DeviceList, Node);
- }
-
- return EFI_NOT_FOUND;
- }
-
-Exit:
- //
- // Update the PreviousTargetId.
- //
- Instance->PreviousTargetId = *Target16;
-
- return EFI_SUCCESS;
-}
+/** @file + This file implements ATA_PASSTHRU_PROTOCOL and EXT_SCSI_PASSTHRU_PROTOCOL interfaces + for managed ATA controllers. + + Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include "AtaAtapiPassThru.h" + +// +// EFI_DRIVER_BINDING_PROTOCOL instance +// +EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding = { + AtaAtapiPassThruSupported, + AtaAtapiPassThruStart, + AtaAtapiPassThruStop, + 0x10, + NULL, + NULL +}; + +ATA_ATAPI_PASS_THRU_INSTANCE gAtaAtapiPassThruInstanceTemplate = { + ATA_ATAPI_PASS_THRU_SIGNATURE, + 0, // Controller Handle + NULL, // PciIo Protocol + NULL, // IdeControllerInit Protocol + { // AtaPassThruMode + // + // According to UEFI2.3 spec Section 12.10, Drivers for non-RAID ATA controllers should set + // both EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL + // bits. + // Note that the driver doesn't support AtaPassThru non blocking I/O. + // + EFI_ATA_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_LOGICAL | EFI_ATA_PASS_THRU_ATTRIBUTES_NONBLOCKIO, + // + // IoAlign + // + sizeof (UINTN) + }, + { // AtaPassThru + NULL, + AtaPassThruPassThru, + AtaPassThruGetNextPort, + AtaPassThruGetNextDevice, + AtaPassThruBuildDevicePath, + AtaPassThruGetDevice, + AtaPassThruResetPort, + AtaPassThruResetDevice + }, + { // ExtScsiPassThruMode + // + // AdapterId + // + 0, + // + // According to UEFI2.3 spec Section 14.7, Drivers for non-RAID SCSI controllers should set + // both EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL and EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL + // bits. + // Note that the driver doesn't support ExtScsiPassThru non blocking I/O. + // + EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL, + // + // IoAlign + // + sizeof (UINTN) + }, + { // ExtScsiPassThru + NULL, + ExtScsiPassThruPassThru, + ExtScsiPassThruGetNextTargetLun, + ExtScsiPassThruBuildDevicePath, + ExtScsiPassThruGetTargetLun, + ExtScsiPassThruResetChannel, + ExtScsiPassThruResetTargetLun, + ExtScsiPassThruGetNextTarget + }, + EfiAtaUnknownMode, // Work Mode + { // IdeRegisters + { 0 }, + { 0 } + }, + { // AhciRegisters + 0 + }, + { // DeviceList + NULL, + NULL + }, + 0, // EnabledPciAttributes + 0, // OriginalAttributes + 0, // PreviousPort + 0, // PreviousPortMultiplier + 0, // PreviousTargetId + 0, // PreviousLun + NULL, // Timer event + { // NonBlocking TaskList + NULL, + NULL + } +}; + +ATAPI_DEVICE_PATH mAtapiDevicePathTemplate = { + { + MESSAGING_DEVICE_PATH, + MSG_ATAPI_DP, + { + (UINT8)(sizeof (ATAPI_DEVICE_PATH)), + (UINT8)((sizeof (ATAPI_DEVICE_PATH)) >> 8) + } + }, + 0, + 0, + 0 +}; + +SATA_DEVICE_PATH mSataDevicePathTemplate = { + { + MESSAGING_DEVICE_PATH, + MSG_SATA_DP, + { + (UINT8)(sizeof (SATA_DEVICE_PATH)), + (UINT8)((sizeof (SATA_DEVICE_PATH)) >> 8) + } + }, + 0, + 0, + 0 +}; + +UINT8 mScsiId[TARGET_MAX_BYTES] = { + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF +}; + +EDKII_ATA_ATAPI_POLICY_PROTOCOL *mAtaAtapiPolicy; +EDKII_ATA_ATAPI_POLICY_PROTOCOL mDefaultAtaAtapiPolicy = { + EDKII_ATA_ATAPI_POLICY_VERSION, + 2, // PuisEnable + 0, // DeviceSleepEnable + 0, // AggressiveDeviceSleepEnable + 0 // Reserved +}; + +/** + Sends an ATA command to an ATA device that is attached to the ATA controller. This function + supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, + and the non-blocking I/O functionality is optional. + + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port + and PortMultiplierPort. + @param[in] Instance Pointer to the ATA_ATAPI_PASS_THRU_INSTANCE. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS The ATA command was sent by the host. For + bi-directional commands, InTransferLength bytes + were transferred from InDataBuffer. For + write and bi-directional commands, OutTransferLength + bytes were transferred by OutDataBuffer. + @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number + of bytes that could be transferred is returned + in InTransferLength. For write and bi-directional + commands, OutTransferLength bytes were transferred + by OutDataBuffer. + @retval EFI_NOT_READY The ATA command could not be sent because + there are too many ATA commands already + queued. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send the ATA command. + @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents + of Acb are invalid. The ATA command was + not sent, so no additional status information + is available. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruPassThruExecute ( + IN UINT16 Port, + IN UINT16 PortMultiplierPort, + IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet, + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN ATA_NONBLOCK_TASK *Task OPTIONAL + ) +{ + EFI_ATA_PASS_THRU_CMD_PROTOCOL Protocol; + EFI_ATA_HC_WORK_MODE Mode; + EFI_STATUS Status; + + Protocol = Packet->Protocol; + + Mode = Instance->Mode; + switch (Mode) { + case EfiAtaIdeMode: + // + // Reassign IDE mode io port registers' base addresses + // + Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters); + + if (EFI_ERROR (Status)) { + return Status; + } + + switch (Protocol) { + case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA: + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Port], + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN: + Status = AtaPioDataInOut ( + Instance->PciIo, + &Instance->IdeRegisters[Port], + Packet->InDataBuffer, + Packet->InTransferLength, + TRUE, + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT: + Status = AtaPioDataInOut ( + Instance->PciIo, + &Instance->IdeRegisters[Port], + Packet->OutDataBuffer, + Packet->OutTransferLength, + FALSE, + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN: + Status = AtaUdmaInOut ( + Instance, + &Instance->IdeRegisters[Port], + TRUE, + Packet->InDataBuffer, + Packet->InTransferLength, + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT: + Status = AtaUdmaInOut ( + Instance, + &Instance->IdeRegisters[Port], + FALSE, + Packet->OutDataBuffer, + Packet->OutTransferLength, + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + default: + return EFI_UNSUPPORTED; + } + + break; + case EfiAtaAhciMode: + if (PortMultiplierPort == 0xFFFF) { + // + // If there is no port multiplier, PortMultiplierPort will be 0xFFFF + // according to UEFI spec. Here, we convert its value to 0 to follow + // AHCI spec. + // + PortMultiplierPort = 0; + } + + switch (Protocol) { + case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA: + Status = AhciNonDataTransfer ( + Instance->PciIo, + &Instance->AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplierPort, + NULL, + 0, + Packet->Acb, + Packet->Asb, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN: + Status = AhciPioTransfer ( + Instance->PciIo, + &Instance->AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplierPort, + NULL, + 0, + TRUE, + Packet->Acb, + Packet->Asb, + Packet->InDataBuffer, + Packet->InTransferLength, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT: + Status = AhciPioTransfer ( + Instance->PciIo, + &Instance->AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplierPort, + NULL, + 0, + FALSE, + Packet->Acb, + Packet->Asb, + Packet->OutDataBuffer, + Packet->OutTransferLength, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN: + Status = AhciDmaTransfer ( + Instance, + &Instance->AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplierPort, + NULL, + 0, + TRUE, + Packet->Acb, + Packet->Asb, + Packet->InDataBuffer, + Packet->InTransferLength, + Packet->Timeout, + Task + ); + break; + case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT: + Status = AhciDmaTransfer ( + Instance, + &Instance->AhciRegisters, + (UINT8)Port, + (UINT8)PortMultiplierPort, + NULL, + 0, + FALSE, + Packet->Acb, + Packet->Asb, + Packet->OutDataBuffer, + Packet->OutTransferLength, + Packet->Timeout, + Task + ); + break; + default: + return EFI_UNSUPPORTED; + } + + break; + + default: + Status = EFI_DEVICE_ERROR; + break; + } + + return Status; +} + +/** + Call back function when the timer event is signaled. + + @param[in] Event The Event this notify function registered to. + @param[in] Context Pointer to the context data registered to the + Event. + +**/ +VOID +EFIAPI +AsyncNonBlockingTransferRoutine ( + EFI_EVENT Event, + VOID *Context + ) +{ + LIST_ENTRY *Entry; + LIST_ENTRY *EntryHeader; + ATA_NONBLOCK_TASK *Task; + EFI_STATUS Status; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + + Instance = (ATA_ATAPI_PASS_THRU_INSTANCE *)Context; + EntryHeader = &Instance->NonBlockingTaskList; + // + // Get the Tasks from the Tasks List and execute it, until there is + // no task in the list or the device is busy with task (EFI_NOT_READY). + // + while (TRUE) { + if (!IsListEmpty (EntryHeader)) { + Entry = GetFirstNode (EntryHeader); + Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (Entry); + } else { + return; + } + + Status = AtaPassThruPassThruExecute ( + Task->Port, + Task->PortMultiplier, + Task->Packet, + Instance, + Task + ); + + // + // If the data transfer meet a error, remove all tasks in the list since these tasks are + // associated with one task from Ata Bus and signal the event with error status. + // + if ((Status != EFI_NOT_READY) && (Status != EFI_SUCCESS)) { + DestroyAsynTaskList (Instance, TRUE); + break; + } + + // + // For Non blocking mode, the Status of EFI_NOT_READY means the operation + // is not finished yet. Otherwise the operation is successful. + // + if (Status == EFI_NOT_READY) { + break; + } else { + RemoveEntryList (&Task->Link); + gBS->SignalEvent (Task->Event); + FreePool (Task); + } + } +} + +/** + The Entry Point of module. + + @param[in] ImageHandle The firmware allocated handle for the EFI image. + @param[in] SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The entry point is executed successfully. + @retval other Some error occurs when executing this entry point. + +**/ +EFI_STATUS +EFIAPI +InitializeAtaAtapiPassThru ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + // + // Install driver model protocol(s). + // + Status = EfiLibInstallDriverBindingComponentName2 ( + ImageHandle, + SystemTable, + &gAtaAtapiPassThruDriverBinding, + ImageHandle, + &gAtaAtapiPassThruComponentName, + &gAtaAtapiPassThruComponentName2 + ); + ASSERT_EFI_ERROR (Status); + + return Status; +} + +/** + Tests to see if this driver supports a given controller. If a child device is provided, + it further tests to see if this driver supports creating a handle for the specified child device. + + This function checks to see if the driver specified by This supports the device specified by + ControllerHandle. Drivers will typically use the device path attached to + ControllerHandle and/or the services from the bus I/O abstraction attached to + ControllerHandle to determine if the driver supports ControllerHandle. This function + may be called many times during platform initialization. In order to reduce boot times, the tests + performed by this function must be very small, and take as little time as possible to execute. This + function must not change the state of any hardware devices, and this function must be aware that the + device specified by ControllerHandle may already be managed by the same driver or a + different driver. This function must match its calls to AllocatePages() with FreePages(), + AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). + Because ControllerHandle may have been previously started by the same driver, if a protocol is + already in the opened state, then it must not be closed with CloseProtocol(). This is required + to guarantee the state of ControllerHandle is not modified by this function. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to test. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For bus drivers, if this parameter is not NULL, then + the bus driver must determine if the bus controller specified + by ControllerHandle and the child controller specified + by RemainingDevicePath are both supported by this + bus driver. + + @retval EFI_SUCCESS The device specified by ControllerHandle and + RemainingDevicePath is supported by the driver specified by This. + @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by the driver + specified by This. + @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by a different + driver or an application that requires exclusive access. + Currently not implemented. + @retval EFI_UNSUPPORTED The device specified by ControllerHandle and + RemainingDevicePath is not supported by the driver specified by This. +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +{ + EFI_STATUS Status; + EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; + EFI_PCI_IO_PROTOCOL *PciIo; + PCI_TYPE00 PciData; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit; + + // + // SATA Controller is a device driver, and should ignore the + // "RemainingDevicePath" according to UEFI spec + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + (VOID *)&ParentDevicePath, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + if (EFI_ERROR (Status)) { + // + // EFI_ALREADY_STARTED is also an error + // + return Status; + } + + // + // Close the protocol because we don't use it here + // + gBS->CloseProtocol ( + Controller, + &gEfiDevicePathProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + Status = gBS->OpenProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + (VOID **)&IdeControllerInit, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + + if (EFI_ERROR (Status)) { + // + // EFI_ALREADY_STARTED is also an error + // + return Status; + } + + // + // Close the I/O Abstraction(s) used to perform the supported test + // + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + // + // Now test the EfiPciIoProtocol + // + Status = gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **)&PciIo, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Now further check the PCI header: Base class (offset 0x0B) and + // Sub Class (offset 0x0A). This controller should be an ATA controller + // + Status = PciIo->Pci.Read ( + PciIo, + EfiPciIoWidthUint8, + PCI_CLASSCODE_OFFSET, + sizeof (PciData.Hdr.ClassCode), + PciData.Hdr.ClassCode + ); + if (EFI_ERROR (Status)) { + return EFI_UNSUPPORTED; + } + + if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) { + return EFI_SUCCESS; + } + + return EFI_UNSUPPORTED; +} + +/** + Starts a device controller or a bus controller. + + The Start() function is designed to be invoked from the EFI boot service ConnectController(). + As a result, much of the error checking on the parameters to Start() has been moved into this + common boot service. It is legal to call Start() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE. + 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned + EFI_DEVICE_PATH_PROTOCOL. + 3. Prior to calling Start(), the Supported() function for the driver specified by This must + have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to start. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For a bus driver, if this parameter is NULL, then handles + for all the children of Controller are created by this driver. + If this parameter is not NULL and the first Device Path Node is + not the End of Device Path Node, then only the handle for the + child device specified by the first Device Path Node of + RemainingDevicePath is created by this driver. + If the first Device Path Node of RemainingDevicePath is + the End of Device Path Node, no child handle is created by this + driver. + + @retval EFI_SUCCESS The device was started. + @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval Others The driver failed to start the device. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +{ + EFI_STATUS Status; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + EFI_PCI_IO_PROTOCOL *PciIo; + UINT64 EnabledPciAttributes; + UINT64 OriginalPciAttributes; + + Status = EFI_SUCCESS; + IdeControllerInit = NULL; + Instance = NULL; + OriginalPciAttributes = 0; + + DEBUG ((DEBUG_INFO, "==AtaAtapiPassThru Start== Controller = %x\n", Controller)); + + Status = gBS->OpenProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + (VOID **)&IdeControllerInit, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_BY_DRIVER + ); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Open Ide_Controller_Init Error, Status=%r", Status)); + goto ErrorExit; + } + + Status = gBS->OpenProtocol ( + Controller, + &gEfiPciIoProtocolGuid, + (VOID **)&PciIo, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Get Pci_Io Protocol Error, Status=%r", Status)); + goto ErrorExit; + } + + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationGet, + 0, + &OriginalPciAttributes + ); + + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationSupported, + 0, + &EnabledPciAttributes + ); + if (!EFI_ERROR (Status)) { + EnabledPciAttributes &= (UINT64)EFI_PCI_DEVICE_ENABLE; + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationEnable, + EnabledPciAttributes, + NULL + ); + } + + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + Status = gBS->LocateProtocol (&gEdkiiAtaAtapiPolicyProtocolGuid, NULL, (VOID **)&mAtaAtapiPolicy); + if (EFI_ERROR (Status)) { + // + // If there is no AtaAtapiPolicy exposed, use the default policy. + // + mAtaAtapiPolicy = &mDefaultAtaAtapiPolicy; + } + + // + // Allocate a buffer to store the ATA_ATAPI_PASS_THRU_INSTANCE data structure + // + Instance = AllocateCopyPool (sizeof (ATA_ATAPI_PASS_THRU_INSTANCE), &gAtaAtapiPassThruInstanceTemplate); + if (Instance == NULL) { + goto ErrorExit; + } + + Instance->ControllerHandle = Controller; + Instance->IdeControllerInit = IdeControllerInit; + Instance->PciIo = PciIo; + Instance->EnabledPciAttributes = EnabledPciAttributes; + Instance->OriginalPciAttributes = OriginalPciAttributes; + Instance->AtaPassThru.Mode = &Instance->AtaPassThruMode; + Instance->ExtScsiPassThru.Mode = &Instance->ExtScsiPassThruMode; + InitializeListHead (&Instance->DeviceList); + InitializeListHead (&Instance->NonBlockingTaskList); + + Instance->TimerEvent = NULL; + + Status = gBS->CreateEvent ( + EVT_TIMER | EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, + AsyncNonBlockingTransferRoutine, + Instance, + &Instance->TimerEvent + ); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + // + // Set 1ms timer. + // + Status = gBS->SetTimer (Instance->TimerEvent, TimerPeriodic, 10000); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + // + // Enumerate all inserted ATA devices. + // + Status = EnumerateAttachedDevice (Instance); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + Status = gBS->InstallMultipleProtocolInterfaces ( + &Controller, + &gEfiAtaPassThruProtocolGuid, + &(Instance->AtaPassThru), + &gEfiExtScsiPassThruProtocolGuid, + &(Instance->ExtScsiPassThru), + NULL + ); + ASSERT_EFI_ERROR (Status); + + return Status; + +ErrorExit: + if (IdeControllerInit != NULL) { + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + } + + if ((Instance != NULL) && (Instance->TimerEvent != NULL)) { + gBS->CloseEvent (Instance->TimerEvent); + } + + if (Instance != NULL) { + // + // Remove all inserted ATA devices. + // + DestroyDeviceInfoList (Instance); + FreePool (Instance); + } + + return EFI_UNSUPPORTED; +} + +/** + Stops a device controller or a bus controller. + + The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). + As a result, much of the error checking on the parameters to Stop() has been moved + into this common boot service. It is legal to call Stop() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this + same driver's Start() function. + 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid + EFI_HANDLE. In addition, all of these handles must have been created in this driver's + Start() function, and the Start() function must have called OpenProtocol() on + ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle A handle to the device being stopped. The handle must + support a bus specific I/O protocol for the driver + to use to stop the device. + @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. + @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL + if NumberOfChildren is 0. + + @retval EFI_SUCCESS The device was stopped. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ) +{ + EFI_STATUS Status; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + EFI_ATA_PASS_THRU_PROTOCOL *AtaPassThru; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_AHCI_REGISTERS *AhciRegisters; + + DEBUG ((DEBUG_INFO, "==AtaAtapiPassThru Stop== Controller = %x\n", Controller)); + + Status = gBS->OpenProtocol ( + Controller, + &gEfiAtaPassThruProtocolGuid, + (VOID **)&AtaPassThru, + This->DriverBindingHandle, + Controller, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (AtaPassThru); + + Status = gBS->UninstallMultipleProtocolInterfaces ( + Controller, + &gEfiAtaPassThruProtocolGuid, + &(Instance->AtaPassThru), + &gEfiExtScsiPassThruProtocolGuid, + &(Instance->ExtScsiPassThru), + NULL + ); + + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + // + // Close protocols opened by AtaAtapiPassThru controller driver + // + gBS->CloseProtocol ( + Controller, + &gEfiIdeControllerInitProtocolGuid, + This->DriverBindingHandle, + Controller + ); + + // + // Close Non-Blocking timer and free Task list. + // + if (Instance->TimerEvent != NULL) { + gBS->CloseEvent (Instance->TimerEvent); + Instance->TimerEvent = NULL; + } + + DestroyAsynTaskList (Instance, FALSE); + // + // Free allocated resource + // + DestroyDeviceInfoList (Instance); + + PciIo = Instance->PciIo; + + // + // Disable this ATA host controller. + // + PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationDisable, + Instance->EnabledPciAttributes, + NULL + ); + + // + // If the current working mode is AHCI mode, then pre-allocated resource + // for AHCI initialization should be released. + // + if (Instance->Mode == EfiAtaAhciMode) { + AhciRegisters = &Instance->AhciRegisters; + PciIo->Unmap ( + PciIo, + AhciRegisters->MapCommandTable + ); + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxCommandTableSize), + AhciRegisters->AhciCommandTable + ); + PciIo->Unmap ( + PciIo, + AhciRegisters->MapCmdList + ); + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxCommandListSize), + AhciRegisters->AhciCmdList + ); + PciIo->Unmap ( + PciIo, + AhciRegisters->MapRFis + ); + PciIo->FreeBuffer ( + PciIo, + EFI_SIZE_TO_PAGES ((UINTN)AhciRegisters->MaxReceiveFisSize), + AhciRegisters->AhciRFis + ); + } + + // + // Restore original PCI attributes + // + Status = PciIo->Attributes ( + PciIo, + EfiPciIoAttributeOperationSet, + Instance->OriginalPciAttributes, + NULL + ); + ASSERT_EFI_ERROR (Status); + + FreePool (Instance); + + return Status; +} + +/** + Traverse the attached ATA devices list to find out the device to access. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in] DeviceType The device type of the ATA device. + + @retval The pointer to the data structure of the device info to access. + +**/ +LIST_ENTRY * +EFIAPI +SearchDeviceInfoList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT16 Port, + IN UINT16 PortMultiplier, + IN EFI_ATA_DEVICE_TYPE DeviceType + ) +{ + EFI_ATA_DEVICE_INFO *DeviceInfo; + LIST_ENTRY *Node; + + Node = GetFirstNode (&Instance->DeviceList); + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + // + // For CD-ROM working in the AHCI mode, only 8 bits are used to record + // the PortMultiplier information. If the CD-ROM is directly attached + // on a SATA port, the PortMultiplier should be translated from 0xFF + // to 0xFFFF according to the UEFI spec. + // + if ((Instance->Mode == EfiAtaAhciMode) && + (DeviceInfo->Type == EfiIdeCdrom) && + (PortMultiplier == 0xFF)) + { + PortMultiplier = 0xFFFF; + } + + if ((DeviceInfo->Type == DeviceType) && + (Port == DeviceInfo->Port) && + (PortMultiplier == DeviceInfo->PortMultiplier)) + { + return Node; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return NULL; +} + +/** + Allocate device info data structure to contain device info. + And insert the data structure to the tail of device list for tracing. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in] DeviceType The device type of the ATA device. + @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd. + + @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list. + @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use. + +**/ +EFI_STATUS +EFIAPI +CreateNewDeviceInfo ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT16 Port, + IN UINT16 PortMultiplier, + IN EFI_ATA_DEVICE_TYPE DeviceType, + IN EFI_IDENTIFY_DATA *IdentifyData + ) +{ + EFI_ATA_DEVICE_INFO *DeviceInfo; + + DeviceInfo = AllocateZeroPool (sizeof (EFI_ATA_DEVICE_INFO)); + + if (DeviceInfo == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + DeviceInfo->Signature = ATA_ATAPI_DEVICE_SIGNATURE; + DeviceInfo->Port = Port; + DeviceInfo->PortMultiplier = PortMultiplier; + DeviceInfo->Type = DeviceType; + + if (IdentifyData != NULL) { + DeviceInfo->IdentifyData = AllocateCopyPool (sizeof (EFI_IDENTIFY_DATA), IdentifyData); + if (DeviceInfo->IdentifyData == NULL) { + FreePool (DeviceInfo); + return EFI_OUT_OF_RESOURCES; + } + } + + InsertTailList (&Instance->DeviceList, &DeviceInfo->Link); + + return EFI_SUCCESS; +} + +/** + Destroy all attached ATA devices info. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +VOID +EFIAPI +DestroyDeviceInfoList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ) +{ + EFI_ATA_DEVICE_INFO *DeviceInfo; + LIST_ENTRY *Node; + + Node = GetFirstNode (&Instance->DeviceList); + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + Node = GetNextNode (&Instance->DeviceList, Node); + + RemoveEntryList (&DeviceInfo->Link); + if (DeviceInfo->IdentifyData != NULL) { + FreePool (DeviceInfo->IdentifyData); + } + + FreePool (DeviceInfo); + } +} + +/** + Destroy all pending non blocking tasks. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] IsSigEvent Indicate whether signal the task event when remove the + task. + +**/ +VOID +EFIAPI +DestroyAsynTaskList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN BOOLEAN IsSigEvent + ) +{ + LIST_ENTRY *Entry; + LIST_ENTRY *DelEntry; + ATA_NONBLOCK_TASK *Task; + EFI_TPL OldTpl; + + OldTpl = gBS->RaiseTPL (TPL_NOTIFY); + if (!IsListEmpty (&Instance->NonBlockingTaskList)) { + // + // Free the Subtask list. + // + for (Entry = (&Instance->NonBlockingTaskList)->ForwardLink; + Entry != (&Instance->NonBlockingTaskList); + ) + { + DelEntry = Entry; + Entry = Entry->ForwardLink; + Task = ATA_NON_BLOCK_TASK_FROM_ENTRY (DelEntry); + + RemoveEntryList (DelEntry); + if (IsSigEvent) { + Task->Packet->Asb->AtaStatus = 0x01; + gBS->SignalEvent (Task->Event); + } + + FreePool (Task); + } + } + + gBS->RestoreTPL (OldTpl); +} + +/** + Enumerate all attached ATA devices at IDE mode or AHCI mode separately. + + The function is designed to enumerate all attached ATA devices. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + + @retval EFI_SUCCESS Successfully enumerate attached ATA devices. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. + +**/ +EFI_STATUS +EFIAPI +EnumerateAttachedDevice ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ) +{ + EFI_STATUS Status; + PCI_TYPE00 PciData; + UINT8 ClassCode; + + Status = EFI_SUCCESS; + + Status = Instance->PciIo->Pci.Read ( + Instance->PciIo, + EfiPciIoWidthUint8, + PCI_CLASSCODE_OFFSET, + sizeof (PciData.Hdr.ClassCode), + PciData.Hdr.ClassCode + ); + ASSERT_EFI_ERROR (Status); + + ClassCode = PciData.Hdr.ClassCode[1]; + + switch (ClassCode) { + case PCI_CLASS_MASS_STORAGE_IDE: + // + // The ATA controller is working at IDE mode + // + Instance->Mode = EfiAtaIdeMode; + + Status = IdeModeInitialization (Instance); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + break; + case PCI_CLASS_MASS_STORAGE_SATADPA: + // + // The ATA controller is working at AHCI mode + // + Instance->Mode = EfiAtaAhciMode; + + Status = AhciModeInitialization (Instance); + + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Done; + } + + break; + default: + Status = EFI_UNSUPPORTED; + } + +Done: + return Status; +} + +/** + Sends an ATA command to an ATA device that is attached to the ATA controller. This function + supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, + and the non-blocking I/O functionality is optional. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port + and PortMultiplierPort. + @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking + I/O is performed. If Event is NULL, then blocking I/O is performed. If + Event is not NULL and non blocking I/O is supported, then non-blocking + I/O is performed, and Event will be signaled when the ATA command completes. + + @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands, + InTransferLength bytes were transferred from InDataBuffer. For write and + bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer. + @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred + is returned in InTransferLength. For write and bi-directional commands, + OutTransferLength bytes were transferred by OutDataBuffer. + @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands + already queued. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command. + @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA + command was not sent, so no additional status information is available. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruPassThru ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort, + IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet, + IN EFI_EVENT Event OPTIONAL + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + EFI_IDENTIFY_DATA *IdentifyData; + UINT64 Capacity; + UINT32 MaxSectorCount; + ATA_NONBLOCK_TASK *Task; + EFI_TPL OldTpl; + UINT32 BlockSize; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->InDataBuffer, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->OutDataBuffer, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->Asb, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk); + + if (Node == NULL) { + Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeCdrom); + if (Node == NULL) { + return EFI_INVALID_PARAMETER; + } + } + + // + // Check whether this device needs 48-bit addressing (ATAPI-6 ata device). + // Per ATA-6 spec, word83: bit15 is zero and bit14 is one. + // If bit10 is one, it means the ata device support 48-bit addressing. + // + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + IdentifyData = DeviceInfo->IdentifyData; + MaxSectorCount = 0x100; + if ((IdentifyData->AtaData.command_set_supported_83 & (BIT10 | BIT15 | BIT14)) == 0x4400) { + Capacity = *((UINT64 *)IdentifyData->AtaData.maximum_lba_for_48bit_addressing); + if (Capacity > 0xFFFFFFF) { + // + // Capacity exceeds 120GB. 48-bit addressing is really needed + // In this case, the max sector count is 0x10000 + // + MaxSectorCount = 0x10000; + } + } + + BlockSize = 0x200; + if ((IdentifyData->AtaData.phy_logic_sector_support & (BIT14 | BIT15)) == BIT14) { + // + // Check logical block size + // + if ((IdentifyData->AtaData.phy_logic_sector_support & BIT12) != 0) { + BlockSize = (UINT32)(((UINT32)(IdentifyData->AtaData.logic_sector_size_hi << 16) | IdentifyData->AtaData.logic_sector_size_lo) * sizeof (UINT16)); + } + } + + // + // convert the transfer length from sector count to byte. + // + if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) && + (Packet->InTransferLength != 0)) + { + Packet->InTransferLength = Packet->InTransferLength * BlockSize; + } + + // + // convert the transfer length from sector count to byte. + // + if (((Packet->Length & EFI_ATA_PASS_THRU_LENGTH_BYTES) == 0) && + (Packet->OutTransferLength != 0)) + { + Packet->OutTransferLength = Packet->OutTransferLength * BlockSize; + } + + // + // If the data buffer described by InDataBuffer/OutDataBuffer and InTransferLength/OutTransferLength + // is too big to be transferred in a single command, then no data is transferred and EFI_BAD_BUFFER_SIZE + // is returned. + // + if (((Packet->InTransferLength != 0) && (Packet->InTransferLength > MaxSectorCount * BlockSize)) || + ((Packet->OutTransferLength != 0) && (Packet->OutTransferLength > MaxSectorCount * BlockSize))) + { + return EFI_BAD_BUFFER_SIZE; + } + + // + // For non-blocking mode, queue the Task into the list. + // + if (Event != NULL) { + Task = AllocateZeroPool (sizeof (ATA_NONBLOCK_TASK)); + if (Task == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Task->Signature = ATA_NONBLOCKING_TASK_SIGNATURE; + Task->Port = Port; + Task->PortMultiplier = PortMultiplierPort; + Task->Packet = Packet; + Task->Event = Event; + Task->IsStart = FALSE; + Task->RetryTimes = DivU64x32 (Packet->Timeout, 1000) + 1; + if (Packet->Timeout == 0) { + Task->InfiniteWait = TRUE; + } else { + Task->InfiniteWait = FALSE; + } + + OldTpl = gBS->RaiseTPL (TPL_NOTIFY); + InsertTailList (&Instance->NonBlockingTaskList, &Task->Link); + gBS->RestoreTPL (OldTpl); + + return EFI_SUCCESS; + } else { + return AtaPassThruPassThruExecute ( + Port, + PortMultiplierPort, + Packet, + Instance, + NULL + ); + } +} + +/** + Used to retrieve the list of legal port numbers for ATA devices on an ATA controller. + These can either be the list of ports where ATA devices are actually present or the + list of legal port numbers for the ATA controller. Regardless, the caller of this + function must probe the port number returned to see if an ATA device is actually + present at that location on the ATA controller. + + The GetNextPort() function retrieves the port number on an ATA controller. If on input + Port is 0xFFFF, then the port number of the first port on the ATA controller is returned + in Port and EFI_SUCCESS is returned. + + If Port is a port number that was returned on a previous call to GetNextPort(), then the + port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS + is returned. If Port is not 0xFFFF and Port was not returned on a previous call to + GetNextPort(), then EFI_INVALID_PARAMETER is returned. + + If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is + returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in, out] Port On input, a pointer to the port number on the ATA controller. + On output, a pointer to the next port number on the ATA + controller. An input value of 0xFFFF retrieves the first port + number on the ATA controller. + + @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port. + @retval EFI_NOT_FOUND There are no more ports on this ATA controller. + @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call + to GetNextPort(). + +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetNextPort ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN OUT UINT16 *Port + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if (Port == NULL) { + return EFI_INVALID_PARAMETER; + } + + if (*Port == 0xFFFF) { + // + // If the Port is all 0xFF's, start to traverse the device list from the beginning + // + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if (DeviceInfo->Type == EfiIdeHarddisk) { + *Port = DeviceInfo->Port; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else if (*Port == Instance->PreviousPort) { + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if ((DeviceInfo->Type == EfiIdeHarddisk) && + (DeviceInfo->Port > *Port)) + { + *Port = DeviceInfo->Port; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else { + // + // Port is not equal to 0xFFFF and also not equal to previous return value + // + return EFI_INVALID_PARAMETER; + } + +Exit: + // + // Update the PreviousPort and PreviousPortMultiplier. + // + Instance->PreviousPort = *Port; + + return EFI_SUCCESS; +} + +/** + Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA + controller. These can either be the list of port multiplier ports where ATA devices are actually + present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this + function must probe the port number and port multiplier port number returned to see if an ATA + device is actually present. + + The GetNextDevice() function retrieves the port multiplier port number of an ATA device + present on a port of an ATA controller. + + If PortMultiplierPort points to a port multiplier port number value that was returned on a + previous call to GetNextDevice(), then the port multiplier port number of the next ATA device + on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is + returned. + + If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first + ATA device on port of the ATA controller is returned in PortMultiplierPort and + EFI_SUCCESS is returned. + + If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort + was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER + is returned. + + If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of + the ATA controller, then EFI_NOT_FOUND is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number present on the ATA controller. + @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an + ATA device present on the ATA controller. + If on input a PortMultiplierPort of 0xFFFF is specified, + then the port multiplier port number of the first ATA device + is returned. On output, a pointer to the port multiplier port + number of the next ATA device present on an ATA controller. + + @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port + of the ATA controller was returned in PortMultiplierPort. + @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller. + @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not + returned on a previous call to GetNextDevice(). + +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetNextDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN OUT UINT16 *PortMultiplierPort + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if (PortMultiplierPort == NULL) { + return EFI_INVALID_PARAMETER; + } + + if (Instance->PreviousPortMultiplier == 0xFFFF) { + // + // If a device is directly attached on a port, previous call to this + // function will return the value 0xFFFF for PortMultiplierPort. In + // this case, there should be no more device on the port multiplier. + // + Instance->PreviousPortMultiplier = 0; + return EFI_NOT_FOUND; + } + + if (*PortMultiplierPort == Instance->PreviousPortMultiplier) { + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if ((DeviceInfo->Type == EfiIdeHarddisk) && + (DeviceInfo->Port == Port) && + (DeviceInfo->PortMultiplier > *PortMultiplierPort)) + { + *PortMultiplierPort = DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else if (*PortMultiplierPort == 0xFFFF) { + // + // If the PortMultiplierPort is all 0xFF's, start to traverse the device list from the beginning + // + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if ((DeviceInfo->Type == EfiIdeHarddisk) && + (DeviceInfo->Port == Port)) + { + *PortMultiplierPort = DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else { + // + // PortMultiplierPort is not equal to 0xFFFF and also not equal to previous return value + // + return EFI_INVALID_PARAMETER; + } + +Exit: + // + // Update the PreviousPort and PreviousPortMultiplier. + // + Instance->PreviousPortMultiplier = *PortMultiplierPort; + + return EFI_SUCCESS; +} + +/** + Used to allocate and build a device path node for an ATA device on an ATA controller. + + The BuildDevicePath() function allocates and builds a single device node for the ATA + device specified by Port and PortMultiplierPort. If the ATA device specified by Port and + PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned. + If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough + resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. + + Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of + DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort, + and EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port Port specifies the port number of the ATA device for which a + device path node is to be allocated and built. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a + device path node is to be allocated and built. If there is no + port multiplier, then specify 0xFFFF. + @param[in, out] DevicePath A pointer to a single device path node that describes the ATA + device specified by Port and PortMultiplierPort. This function + is responsible for allocating the buffer DevicePath with the + boot service AllocatePool(). It is the caller's responsibility + to free DevicePath when the caller is finished with DevicePath. + @retval EFI_SUCCESS The device path node that describes the ATA device specified by + Port and PortMultiplierPort was allocated and returned in DevicePath. + @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not + exist on the ATA controller. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruBuildDevicePath ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort, + IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath + ) +{ + EFI_DEV_PATH *DevicePathNode; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + // + // Validate parameters passed in. + // + if (DevicePath == NULL) { + return EFI_INVALID_PARAMETER; + } + + Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk); + if (Node == NULL) { + return EFI_NOT_FOUND; + } + + if (Instance->Mode == EfiAtaIdeMode) { + DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate); + if (DevicePathNode == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + DevicePathNode->Atapi.PrimarySecondary = (UINT8)Port; + DevicePathNode->Atapi.SlaveMaster = (UINT8)PortMultiplierPort; + DevicePathNode->Atapi.Lun = 0; + } else { + DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate); + if (DevicePathNode == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + DevicePathNode->Sata.HBAPortNumber = Port; + DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplierPort; + DevicePathNode->Sata.Lun = 0; + } + + *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePathNode; + + return EFI_SUCCESS; +} + +/** + Used to translate a device path node to a port number and port multiplier port number. + + The GetDevice() function determines the port and port multiplier port number associated with + the ATA device described by DevicePath. If DevicePath is a device path node type that the + ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents + DevicePath into a port number and port multiplier port number. + + If this translation is successful, then that port number and port multiplier port number are returned + in Port and PortMultiplierPort, and EFI_SUCCESS is returned. + + If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned. + + If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then + EFI_UNSUPPORTED is returned. + + If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not + a valid translation from DevicePath to a port number and port multiplier port number, then + EFI_NOT_FOUND is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] DevicePath A pointer to the device path node that describes an ATA device on the + ATA controller. + @param[out] Port On return, points to the port number of an ATA device on the ATA controller. + @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device + on the ATA controller. + + @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier + port number, and they were returned in Port and PortMultiplierPort. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_INVALID_PARAMETER Port is NULL. + @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL. + @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath. + @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier + port number does not exist. +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, + OUT UINT16 *Port, + OUT UINT16 *PortMultiplierPort + ) +{ + EFI_DEV_PATH *DevicePathNode; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + // + // Validate parameters passed in. + // + if ((DevicePath == NULL) || (Port == NULL) || (PortMultiplierPort == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // Check whether the DevicePath belongs to SCSI_DEVICE_PATH or ATAPI_DEVICE_PATH + // + if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || + ((DevicePath->SubType != MSG_SATA_DP) && + (DevicePath->SubType != MSG_ATAPI_DP)) || + ((DevicePathNodeLength (DevicePath) != sizeof (ATAPI_DEVICE_PATH)) && + (DevicePathNodeLength (DevicePath) != sizeof (SATA_DEVICE_PATH)))) + { + return EFI_UNSUPPORTED; + } + + DevicePathNode = (EFI_DEV_PATH *)DevicePath; + + if (Instance->Mode == EfiAtaIdeMode) { + *Port = DevicePathNode->Atapi.PrimarySecondary; + *PortMultiplierPort = DevicePathNode->Atapi.SlaveMaster; + } else { + *Port = DevicePathNode->Sata.HBAPortNumber; + *PortMultiplierPort = DevicePathNode->Sata.PortMultiplierPortNumber; + } + + Node = SearchDeviceInfoList (Instance, *Port, *PortMultiplierPort, EfiIdeHarddisk); + + if (Node == NULL) { + return EFI_NOT_FOUND; + } + + return EFI_SUCCESS; +} + +/** + Resets a specific port on the ATA controller. This operation also resets all the ATA devices + connected to the port. + + The ResetChannel() function resets an a specific port on an ATA controller. This operation + resets all the ATA devices connected to that port. If this ATA controller does not support + a reset port operation, then EFI_UNSUPPORTED is returned. + + If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is + returned. + + If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned. + + If the port reset operation is completed, then EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number on the ATA controller. + + @retval EFI_SUCCESS The ATA controller port was reset. + @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruResetPort ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port + ) +{ + // + // Return success directly then upper layer driver could think reset port operation is done. + // + return EFI_SUCCESS; +} + +/** + Resets an ATA device that is connected to an ATA controller. + + The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort. + If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is + returned. + + If Port or PortMultiplierPort are not in a valid range for this ATA controller, then + EFI_INVALID_PARAMETER is returned. + + If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR + is returned. + + If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is + returned. + + If the device reset operation is completed, then EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port Port represents the port number of the ATA device to be reset. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset. + If there is no port multiplier, then specify 0xFFFF. + @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset. + @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation. + @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device + specified by Port and PortMultiplierPort. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device + specified by Port and PortMultiplierPort. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruResetDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + Node = SearchDeviceInfoList (Instance, Port, PortMultiplierPort, EfiIdeHarddisk); + + if (Node == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Return success directly then upper layer driver could think reset device operation is done. + // + return EFI_SUCCESS; +} + +/** + Submit ATAPI request sense command. + + @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param[in] Target The Target is an array of size TARGET_MAX_BYTES and it represents + the id of the SCSI device to send the SCSI Request Packet. Each + transport driver may choose to utilize a subset of this size to suit the needs + of transport target representation. For example, a Fibre Channel driver + may use only 8 bytes (WWN) to represent an FC target. + @param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet. + @param[in] SenseData A pointer to store sense data. + @param[in] SenseDataLength The sense data length. + @param[in] Timeout The timeout value to execute this cmd, uses 100ns as a unit. + + @retval EFI_SUCCESS Send out the ATAPI packet command successfully. + @retval EFI_DEVICE_ERROR The device failed to send data. + +**/ +EFI_STATUS +EFIAPI +AtaPacketRequestSense ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun, + IN VOID *SenseData, + IN UINT8 SenseDataLength, + IN UINT64 Timeout + ) +{ + EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET Packet; + UINT8 Cdb[12]; + EFI_STATUS Status; + + ZeroMem (&Packet, sizeof (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET)); + ZeroMem (Cdb, 12); + + Cdb[0] = ATA_CMD_REQUEST_SENSE; + Cdb[4] = SenseDataLength; + + Packet.Timeout = Timeout; + Packet.Cdb = Cdb; + Packet.CdbLength = 12; + Packet.DataDirection = EFI_EXT_SCSI_DATA_DIRECTION_READ; + Packet.InDataBuffer = SenseData; + Packet.InTransferLength = SenseDataLength; + + Status = ExtScsiPassThruPassThru (This, Target, Lun, &Packet, NULL); + + return Status; +} + +/** + Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function + supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the + nonblocking I/O functionality is optional. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTES and it represents + the id of the SCSI device to send the SCSI Request Packet. Each + transport driver may choose to utilize a subset of this size to suit the needs + of transport target representation. For example, a Fibre Channel driver + may use only 8 bytes (WWN) to represent an FC target. + @param Lun The LUN of the SCSI device to send the SCSI Request Packet. + @param Packet A pointer to the SCSI Request Packet to send to the SCSI device + specified by Target and Lun. + @param Event If nonblocking I/O is not supported then Event is ignored, and blocking + I/O is performed. If Event is NULL, then blocking I/O is performed. If + Event is not NULL and non blocking I/O is supported, then + nonblocking I/O is performed, and Event will be signaled when the + SCSI Request Packet completes. + + @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional + commands, InTransferLength bytes were transferred from + InDataBuffer. For write and bi-directional commands, + OutTransferLength bytes were transferred by + OutDataBuffer. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that + could be transferred is returned in InTransferLength. For write + and bi-directional commands, OutTransferLength bytes were + transferred by OutDataBuffer. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Request Packets already queued. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request + Packet. + @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported + by the host adapter. This includes the case of Bi-directional SCSI + commands not supported by the implementation. The SCSI Request + Packet was not sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruPassThru ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun, + IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, + IN EFI_EVENT Event OPTIONAL + ) +{ + EFI_STATUS Status; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + UINT8 Port; + UINT8 PortMultiplier; + EFI_ATA_HC_WORK_MODE Mode; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + BOOLEAN SenseReq; + EFI_SCSI_SENSE_DATA *PtrSenseData; + UINTN SenseDataLen; + EFI_STATUS SenseStatus; + + SenseDataLen = 0; + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if ((Packet == NULL) || (Packet->Cdb == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // Don't support variable length CDB + // + if ((Packet->CdbLength != 6) && (Packet->CdbLength != 10) && + (Packet->CdbLength != 12) && (Packet->CdbLength != 16)) + { + return EFI_INVALID_PARAMETER; + } + + if ((Packet->SenseDataLength != 0) && (Packet->SenseData == NULL)) { + return EFI_INVALID_PARAMETER; + } + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->InDataBuffer, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->OutDataBuffer, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + if ((This->Mode->IoAlign > 1) && !ADDRESS_IS_ALIGNED (Packet->SenseData, This->Mode->IoAlign)) { + return EFI_INVALID_PARAMETER; + } + + // + // For ATAPI device, doesn't support multiple LUN device. + // + if (Lun != 0) { + return EFI_INVALID_PARAMETER; + } + + // + // The layout of Target array: + // ________________________________________________________________________ + // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 | + // |_____________________|_____________________|_____|______________________| + // | | The port multiplier | | | + // | The port number | port number | N/A | N/A | + // |_____________________|_____________________|_____|______________________| + // + // For ATAPI device, 2 bytes is enough to represent the location of SCSI device. + // + Port = Target[0]; + PortMultiplier = Target[1]; + + Node = SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom); + if (Node == NULL) { + return EFI_INVALID_PARAMETER; + } + + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + // + // ATA_CMD_IDENTIFY_DEVICE cmd is a ATA cmd but not a SCSI cmd. + // Normally it should NOT be passed down through ExtScsiPassThru protocol interface. + // But to response EFI_DISK_INFO.Identify() request from ScsiDisk, we should handle this command. + // + if (*((UINT8 *)Packet->Cdb) == ATA_CMD_IDENTIFY_DEVICE) { + CopyMem (Packet->InDataBuffer, DeviceInfo->IdentifyData, sizeof (EFI_IDENTIFY_DATA)); + // + // For IDENTIFY DEVICE cmd, we don't need to get sense data. + // + Packet->SenseDataLength = 0; + return EFI_SUCCESS; + } + + Mode = Instance->Mode; + switch (Mode) { + case EfiAtaIdeMode: + // + // Reassign IDE mode io port registers' base addresses + // + Status = GetIdeRegisterIoAddr (Instance->PciIo, Instance->IdeRegisters); + + if (EFI_ERROR (Status)) { + return Status; + } + + Status = AtaPacketCommandExecute (Instance->PciIo, &Instance->IdeRegisters[Port], Port, PortMultiplier, Packet); + break; + case EfiAtaAhciMode: + if (PortMultiplier == 0xFF) { + // + // If there is no port multiplier, the PortMultiplier will be 0xFF + // Here, we convert its value to 0 to follow the AHCI spec. + // + PortMultiplier = 0; + } + + Status = AhciPacketCommandExecute (Instance->PciIo, &Instance->AhciRegisters, Port, PortMultiplier, Packet); + break; + default: + Status = EFI_DEVICE_ERROR; + break; + } + + // + // If the cmd doesn't get executed correctly, then check sense data. + // + if (EFI_ERROR (Status) && (Packet->SenseDataLength != 0) && (*((UINT8 *)Packet->Cdb) != ATA_CMD_REQUEST_SENSE)) { + PtrSenseData = AllocateAlignedPages (EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA)), This->Mode->IoAlign); + if (PtrSenseData == NULL) { + return EFI_DEVICE_ERROR; + } + + for (SenseReq = TRUE; SenseReq;) { + SenseStatus = AtaPacketRequestSense ( + This, + Target, + Lun, + PtrSenseData, + sizeof (EFI_SCSI_SENSE_DATA), + Packet->Timeout + ); + if (EFI_ERROR (SenseStatus)) { + break; + } + + CopyMem ((UINT8 *)Packet->SenseData + SenseDataLen, PtrSenseData, sizeof (EFI_SCSI_SENSE_DATA)); + SenseDataLen += sizeof (EFI_SCSI_SENSE_DATA); + + // + // no more sense key or number of sense keys exceeds predefined, + // skip the loop. + // + if ((PtrSenseData->Sense_Key == EFI_SCSI_SK_NO_SENSE) || + (SenseDataLen + sizeof (EFI_SCSI_SENSE_DATA) > Packet->SenseDataLength)) + { + SenseReq = FALSE; + } + } + + FreeAlignedPages (PtrSenseData, EFI_SIZE_TO_PAGES (sizeof (EFI_SCSI_SENSE_DATA))); + } + + // + // Update the SenseDataLength field to the data length received. + // + Packet->SenseDataLength = (UINT8)SenseDataLen; + return Status; +} + +/** + Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These + can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal + Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the + Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI + channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target On input, a pointer to the Target ID (an array of size + TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. + On output, a pointer to the Target ID (an array of + TARGET_MAX_BYTES) of the next SCSI device present on a SCSI + channel. An input value of 0xF(all bytes in the array are 0xF) in the + Target array retrieves the Target ID of the first SCSI device present on a + SCSI channel. + @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI + channel. On output, a pointer to the LUN of the next SCSI device present + on a SCSI channel. + + @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI + channel was returned in Target and Lun. + @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were + not returned on a previous call to GetNextTargetLun(). + @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetNextTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN OUT UINT8 **Target, + IN OUT UINT64 *Lun + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + UINT8 *Target8; + UINT16 *Target16; + + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if ((Target == NULL) || (Lun == NULL)) { + return EFI_INVALID_PARAMETER; + } + + if (*Target == NULL) { + return EFI_INVALID_PARAMETER; + } + + Target8 = *Target; + Target16 = (UINT16 *)*Target; + + if (CompareMem (Target8, mScsiId, TARGET_MAX_BYTES) != 0) { + // + // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device. + // So the higher bytes in Target array should be 0xFF. + // + if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) { + return EFI_INVALID_PARAMETER; + } + + // + // When Target is not all 0xFF's, compare 2 least significant bytes with + // previous target id to see if it is returned by previous call. + // + if ((*Target16 != Instance->PreviousTargetId) || + (*Lun != Instance->PreviousLun)) + { + return EFI_INVALID_PARAMETER; + } + + // + // Traverse the whole device list to find the next cdrom closed to + // the device signified by Target[0] and Target[1]. + // + // Note that we here use a tricky way to find the next cdrom : + // All ata devices are detected and inserted into the device list + // sequentially. + // + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if ((DeviceInfo->Type == EfiIdeCdrom) && + ((Target8[0] < DeviceInfo->Port) || + ((Target8[0] == DeviceInfo->Port) && + (Target8[1] < (UINT8)DeviceInfo->PortMultiplier)))) + { + Target8[0] = (UINT8)DeviceInfo->Port; + Target8[1] = (UINT8)DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else { + // + // If the array is all 0xFF's, start to traverse the device list from the beginning + // + Node = GetFirstNode (&Instance->DeviceList); + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if (DeviceInfo->Type == EfiIdeCdrom) { + Target8[0] = (UINT8)DeviceInfo->Port; + Target8[1] = (UINT8)DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } + +Exit: + *Lun = 0; + + // + // Update the PreviousTargetId. + // + Instance->PreviousTargetId = *Target16; + Instance->PreviousLun = *Lun; + + return EFI_SUCCESS; +} + +/** + Used to allocate and build a device path node for a SCSI device on a SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the + Target ID of the SCSI device for which a device path node is to be + allocated and built. Transport drivers may chose to utilize a subset of + this size to suit the representation of targets. For example, a Fibre + Channel driver may use only 8 bytes (WWN) in the array to represent a + FC target. + @param Lun The LUN of the SCSI device for which a device path node is to be + allocated and built. + @param DevicePath A pointer to a single device path node that describes the SCSI device + specified by Target and Lun. This function is responsible for + allocating the buffer DevicePath with the boot service + AllocatePool(). It is the caller's responsibility to free + DevicePath when the caller is finished with DevicePath. + + @retval EFI_SUCCESS The device path node that describes the SCSI device specified by + Target and Lun was allocated and returned in + DevicePath. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist + on the SCSI channel. + @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruBuildDevicePath ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun, + IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath + ) +{ + EFI_DEV_PATH *DevicePathNode; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + UINT8 Port; + UINT8 PortMultiplier; + + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + Port = Target[0]; + PortMultiplier = Target[1]; + + // + // Validate parameters passed in. + // + if (DevicePath == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // can not build device path for the SCSI Host Controller. + // + if (Lun != 0) { + return EFI_NOT_FOUND; + } + + if (SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom) == NULL) { + return EFI_NOT_FOUND; + } + + if (Instance->Mode == EfiAtaIdeMode) { + DevicePathNode = AllocateCopyPool (sizeof (ATAPI_DEVICE_PATH), &mAtapiDevicePathTemplate); + if (DevicePathNode == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + DevicePathNode->Atapi.PrimarySecondary = Port; + DevicePathNode->Atapi.SlaveMaster = PortMultiplier; + DevicePathNode->Atapi.Lun = (UINT16)Lun; + } else { + DevicePathNode = AllocateCopyPool (sizeof (SATA_DEVICE_PATH), &mSataDevicePathTemplate); + if (DevicePathNode == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + DevicePathNode->Sata.HBAPortNumber = Port; + // + // For CD-ROM working in the AHCI mode, only 8 bits are used to record + // the PortMultiplier information. If the CD-ROM is directly attached + // on a SATA port, the PortMultiplier should be translated from 0xFF + // to 0xFFFF according to the UEFI spec. + // + DevicePathNode->Sata.PortMultiplierPortNumber = PortMultiplier == 0xFF ? 0xFFFF : PortMultiplier; + DevicePathNode->Sata.Lun = (UINT16)Lun; + } + + *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)DevicePathNode; + + return EFI_SUCCESS; +} + +/** + Used to translate a device path node to a Target ID and LUN. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param DevicePath A pointer to a single device path node that describes the SCSI device + on the SCSI channel. + @param Target A pointer to the Target Array which represents the ID of a SCSI device + on the SCSI channel. + @param Lun A pointer to the LUN of a SCSI device on the SCSI channel. + + @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and + LUN, and they were returned in Target and Lun. + @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL. + @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN + does not exist. + @retval EFI_UNSUPPORTED This driver does not support the device path node type in + DevicePath. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, + OUT UINT8 **Target, + OUT UINT64 *Lun + ) +{ + EFI_DEV_PATH *DevicePathNode; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + // + // Validate parameters passed in. + // + if ((DevicePath == NULL) || (Target == NULL) || (Lun == NULL)) { + return EFI_INVALID_PARAMETER; + } + + if (*Target == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Check whether the DevicePath belongs to SCSI_DEVICE_PATH + // + if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || + ((DevicePath->SubType != MSG_ATAPI_DP) && + (DevicePath->SubType != MSG_SATA_DP)) || + ((DevicePathNodeLength (DevicePath) != sizeof (ATAPI_DEVICE_PATH)) && + (DevicePathNodeLength (DevicePath) != sizeof (SATA_DEVICE_PATH)))) + { + return EFI_UNSUPPORTED; + } + + SetMem (*Target, TARGET_MAX_BYTES, 0xFF); + + DevicePathNode = (EFI_DEV_PATH *)DevicePath; + + if (Instance->Mode == EfiAtaIdeMode) { + (*Target)[0] = (UINT8)DevicePathNode->Atapi.PrimarySecondary; + (*Target)[1] = (UINT8)DevicePathNode->Atapi.SlaveMaster; + *Lun = (UINT8)DevicePathNode->Atapi.Lun; + } else { + (*Target)[0] = (UINT8)DevicePathNode->Sata.HBAPortNumber; + (*Target)[1] = (UINT8)DevicePathNode->Sata.PortMultiplierPortNumber; + *Lun = (UINT8)DevicePathNode->Sata.Lun; + } + + Node = SearchDeviceInfoList (Instance, (*Target)[0], (*Target)[1], EfiIdeCdrom); + + if (Node == NULL) { + return EFI_NOT_FOUND; + } + + if (*Lun != 0) { + return EFI_NOT_FOUND; + } + + return EFI_SUCCESS; +} + +/** + Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + + @retval EFI_SUCCESS The SCSI channel was reset. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel. + @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruResetChannel ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This + ) +{ + // + // Return success directly then upper layer driver could think reset channel operation is done. + // + return EFI_SUCCESS; +} + +/** + Resets a SCSI logical unit that is connected to a SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the + target port ID of the SCSI device containing the SCSI logical unit to + reset. Transport drivers may chose to utilize a subset of this array to suit + the representation of their targets. + @param Lun The LUN of the SCSI device to reset. + + @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset. + @retval EFI_INVALID_PARAMETER Target or Lun is NULL. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device + specified by Target and Lun. + @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device + specified by Target and Lun. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruResetTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + UINT8 Port; + UINT8 PortMultiplier; + + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + // + // For ATAPI device, doesn't support multiple LUN device. + // + if (Lun != 0) { + return EFI_INVALID_PARAMETER; + } + + // + // The layout of Target array: + // ________________________________________________________________________ + // | Byte 0 | Byte 1 | ... | TARGET_MAX_BYTES - 1 | + // |_____________________|_____________________|_____|______________________| + // | | The port multiplier | | | + // | The port number | port number | N/A | N/A | + // |_____________________|_____________________|_____|______________________| + // + // For ATAPI device, 2 bytes is enough to represent the location of SCSI device. + // + Port = Target[0]; + PortMultiplier = Target[1]; + + Node = SearchDeviceInfoList (Instance, Port, PortMultiplier, EfiIdeCdrom); + if (Node == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Return success directly then upper layer driver could think reset target LUN operation is done. + // + return EFI_SUCCESS; +} + +/** + Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either + be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs + for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to + see if a SCSI device is actually present at that location on the SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. + On output, a pointer to the Target ID (an array of + TARGET_MAX_BYTES) of the next SCSI device present on a SCSI + channel. An input value of 0xF(all bytes in the array are 0xF) in the + Target array retrieves the Target ID of the first SCSI device present on a + SCSI channel. + + @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI + channel was returned in Target. + @retval EFI_INVALID_PARAMETER Target or Lun is NULL. + @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not + returned on a previous call to GetNextTarget(). + @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetNextTarget ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN OUT UINT8 **Target + ) +{ + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + LIST_ENTRY *Node; + EFI_ATA_DEVICE_INFO *DeviceInfo; + UINT8 *Target8; + UINT16 *Target16; + + Instance = EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS (This); + + if ((Target == NULL) || (*Target == NULL)) { + return EFI_INVALID_PARAMETER; + } + + Target8 = *Target; + Target16 = (UINT16 *)*Target; + + if (CompareMem (Target8, mScsiId, TARGET_MAX_BYTES) != 0) { + // + // For ATAPI device, we use 2 least significant bytes to represent the location of SCSI device. + // So the higher bytes in Target array should be 0xFF. + // + if (CompareMem (&Target8[2], &mScsiId[2], TARGET_MAX_BYTES - 2) != 0) { + return EFI_INVALID_PARAMETER; + } + + // + // When Target is not all 0xFF's, compare 2 least significant bytes with + // previous target id to see if it is returned by previous call. + // + if (*Target16 != Instance->PreviousTargetId) { + return EFI_INVALID_PARAMETER; + } + + // + // Traverse the whole device list to find the next cdrom closed to + // the device signified by Target[0] and Target[1]. + // + // Note that we here use a tricky way to find the next cdrom : + // All ata devices are detected and inserted into the device list + // sequentially. + // + Node = GetFirstNode (&Instance->DeviceList); + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if ((DeviceInfo->Type == EfiIdeCdrom) && + ((Target8[0] < DeviceInfo->Port) || + ((Target8[0] == DeviceInfo->Port) && + (Target8[1] < (UINT8)DeviceInfo->PortMultiplier)))) + { + Target8[0] = (UINT8)DeviceInfo->Port; + Target8[1] = (UINT8)DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } else { + // + // If the array is all 0xFF's, start to traverse the device list from the beginning + // + Node = GetFirstNode (&Instance->DeviceList); + + while (!IsNull (&Instance->DeviceList, Node)) { + DeviceInfo = ATA_ATAPI_DEVICE_INFO_FROM_THIS (Node); + + if (DeviceInfo->Type == EfiIdeCdrom) { + Target8[0] = (UINT8)DeviceInfo->Port; + Target8[1] = (UINT8)DeviceInfo->PortMultiplier; + goto Exit; + } + + Node = GetNextNode (&Instance->DeviceList, Node); + } + + return EFI_NOT_FOUND; + } + +Exit: + // + // Update the PreviousTargetId. + // + Instance->PreviousTargetId = *Target16; + + return EFI_SUCCESS; +} diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h index 016fc6890a..36fd6603de 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.h @@ -1,1297 +1,1297 @@ -/** @file
- Header file for ATA/ATAPI PASS THRU driver.
-
- Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __ATA_ATAPI_PASS_THRU_H__
-#define __ATA_ATAPI_PASS_THRU_H__
-
-#include <Uefi.h>
-
-#include <IndustryStandard/Pci.h>
-#include <IndustryStandard/Atapi.h>
-#include <IndustryStandard/Scsi.h>
-
-#include <Protocol/PciIo.h>
-#include <Protocol/IdeControllerInit.h>
-#include <Protocol/AtaPassThru.h>
-#include <Protocol/ScsiPassThruExt.h>
-#include <Protocol/AtaAtapiPolicy.h>
-
-#include <Library/DebugLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/PciLib.h>
-#include <Library/PcdLib.h>
-#include <Library/TimerLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/ReportStatusCodeLib.h>
-#include <Library/DevicePathLib.h>
-
-#include "IdeMode.h"
-#include "AhciMode.h"
-
-extern EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2;
-
-extern EDKII_ATA_ATAPI_POLICY_PROTOCOL *mAtaAtapiPolicy;
-
-#define ATA_ATAPI_PASS_THRU_SIGNATURE SIGNATURE_32 ('a', 'a', 'p', 't')
-#define ATA_ATAPI_DEVICE_SIGNATURE SIGNATURE_32 ('a', 'd', 'e', 'v')
-#define ATA_NONBLOCKING_TASK_SIGNATURE SIGNATURE_32 ('a', 't', 's', 'k')
-
-typedef struct _ATA_NONBLOCK_TASK ATA_NONBLOCK_TASK;
-
-typedef enum {
- EfiAtaIdeMode,
- EfiAtaAhciMode,
- EfiAtaRaidMode,
- EfiAtaUnknownMode
-} EFI_ATA_HC_WORK_MODE;
-
-typedef enum {
- EfiIdeCdrom, /* ATAPI CDROM */
- EfiIdeHarddisk, /* Hard Disk */
- EfiPortMultiplier, /* Port Multiplier */
- EfiIdeUnknown
-} EFI_ATA_DEVICE_TYPE;
-
-//
-// Ahci mode device info
-//
-typedef struct {
- UINT32 Signature;
- LIST_ENTRY Link;
-
- UINT16 Port;
- UINT16 PortMultiplier;
- EFI_ATA_DEVICE_TYPE Type;
-
- EFI_IDENTIFY_DATA *IdentifyData;
-} EFI_ATA_DEVICE_INFO;
-
-typedef struct {
- UINT32 Signature;
-
- EFI_HANDLE ControllerHandle;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit;
-
- EFI_ATA_PASS_THRU_MODE AtaPassThruMode;
- EFI_ATA_PASS_THRU_PROTOCOL AtaPassThru;
- EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode;
- EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru;
-
- EFI_ATA_HC_WORK_MODE Mode;
-
- EFI_IDE_REGISTERS IdeRegisters[EfiIdeMaxChannel];
- EFI_AHCI_REGISTERS AhciRegisters;
-
- //
- // The attached device list
- //
- LIST_ENTRY DeviceList;
- UINT64 EnabledPciAttributes;
- UINT64 OriginalPciAttributes;
-
- //
- // For AtaPassThru protocol, using the following bytes to record the previous call in
- // GetNextPort()/GetNextDevice().
- //
- UINT16 PreviousPort;
- UINT16 PreviousPortMultiplier;
- //
- // For ExtScsiPassThru protocol, using the following bytes to record the previous call in
- // GetNextTarget()/GetNextTargetLun().
- //
- UINT16 PreviousTargetId;
- UINT64 PreviousLun;
-
- //
- // For Non-blocking.
- //
- EFI_EVENT TimerEvent;
- LIST_ENTRY NonBlockingTaskList;
-} ATA_ATAPI_PASS_THRU_INSTANCE;
-
-//
-// Task for Non-blocking mode.
-//
-struct _ATA_NONBLOCK_TASK {
- UINT32 Signature;
- LIST_ENTRY Link;
-
- UINT16 Port;
- UINT16 PortMultiplier;
- EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet;
- BOOLEAN IsStart;
- EFI_EVENT Event;
- UINT64 RetryTimes;
- BOOLEAN InfiniteWait;
- VOID *Map; // Pointer to map.
- VOID *TableMap; // Pointer to PRD table map.
- EFI_ATA_DMA_PRD *MapBaseAddress; // Pointer to range Base address for Map.
- UINTN PageCount; // The page numbers used by PCIO freebuffer.
-};
-
-//
-// Timeout value which uses 100ns as a unit.
-// It means 3 second span.
-//
-#define ATA_ATAPI_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3)
-#define ATA_SPINUP_TIMEOUT EFI_TIMER_PERIOD_SECONDS(10)
-
-#define ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
- CR (a, \
- ATA_ATAPI_PASS_THRU_INSTANCE, \
- AtaPassThru, \
- ATA_ATAPI_PASS_THRU_SIGNATURE \
- )
-
-#define EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \
- CR (a, \
- ATA_ATAPI_PASS_THRU_INSTANCE, \
- ExtScsiPassThru, \
- ATA_ATAPI_PASS_THRU_SIGNATURE \
- )
-
-#define ATA_ATAPI_DEVICE_INFO_FROM_THIS(a) \
- CR (a, \
- EFI_ATA_DEVICE_INFO, \
- Link, \
- ATA_ATAPI_DEVICE_SIGNATURE \
- );
-
-#define ATA_NON_BLOCK_TASK_FROM_ENTRY(a) \
- CR (a, \
- ATA_NONBLOCK_TASK, \
- Link, \
- ATA_NONBLOCKING_TASK_SIGNATURE \
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- );
-
-/**
- Tests to see if this driver supports a given controller. If a child device is provided,
- it further tests to see if this driver supports creating a handle for the specified child device.
-
- This function checks to see if the driver specified by This supports the device specified by
- ControllerHandle. Drivers will typically use the device path attached to
- ControllerHandle and/or the services from the bus I/O abstraction attached to
- ControllerHandle to determine if the driver supports ControllerHandle. This function
- may be called many times during platform initialization. In order to reduce boot times, the tests
- performed by this function must be very small, and take as little time as possible to execute. This
- function must not change the state of any hardware devices, and this function must be aware that the
- device specified by ControllerHandle may already be managed by the same driver or a
- different driver. This function must match its calls to AllocatePages() with FreePages(),
- AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
- Because ControllerHandle may have been previously started by the same driver, if a protocol is
- already in the opened state, then it must not be closed with CloseProtocol(). This is required
- to guarantee the state of ControllerHandle is not modified by this function.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to test. This handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For bus drivers, if this parameter is not NULL, then
- the bus driver must determine if the bus controller specified
- by ControllerHandle and the child controller specified
- by RemainingDevicePath are both supported by this
- bus driver.
-
- @retval EFI_SUCCESS The device specified by ControllerHandle and
- RemainingDevicePath is supported by the driver specified by This.
- @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by the driver
- specified by This.
- @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by a different
- driver or an application that requires exclusive access.
- Currently not implemented.
- @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
- RemainingDevicePath is not supported by the driver specified by This.
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Starts a device controller or a bus controller.
-
- The Start() function is designed to be invoked from the EFI boot service ConnectController().
- As a result, much of the error checking on the parameters to Start() has been moved into this
- common boot service. It is legal to call Start() from other locations,
- but the following calling restrictions must be followed, or the system behavior will not be deterministic.
- 1. ControllerHandle must be a valid EFI_HANDLE.
- 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
- EFI_DEVICE_PATH_PROTOCOL.
- 3. Prior to calling Start(), the Supported() function for the driver specified by This must
- have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to start. This handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For a bus driver, if this parameter is NULL, then handles
- for all the children of Controller are created by this driver.
- If this parameter is not NULL and the first Device Path Node is
- not the End of Device Path Node, then only the handle for the
- child device specified by the first Device Path Node of
- RemainingDevicePath is created by this driver.
- If the first Device Path Node of RemainingDevicePath is
- the End of Device Path Node, no child handle is created by this
- driver.
-
- @retval EFI_SUCCESS The device was started.
- @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failed to start the device.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Stops a device controller or a bus controller.
-
- The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
- As a result, much of the error checking on the parameters to Stop() has been moved
- into this common boot service. It is legal to call Stop() from other locations,
- but the following calling restrictions must be followed, or the system behavior will not be deterministic.
- 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
- same driver's Start() function.
- 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
- EFI_HANDLE. In addition, all of these handles must have been created in this driver's
- Start() function, and the Start() function must have called OpenProtocol() on
- ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle A handle to the device being stopped. The handle must
- support a bus specific I/O protocol for the driver
- to use to stop the device.
- @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
- @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
- if NumberOfChildren is 0.
-
- @retval EFI_SUCCESS The device was stopped.
- @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-/**
- Traverse the attached ATA devices list to find out the device to access.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in] DeviceType The device type of the ATA device.
-
- @retval The pointer to the data structure of the device info to access.
-
-**/
-LIST_ENTRY *
-EFIAPI
-SearchDeviceInfoList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT16 Port,
- IN UINT16 PortMultiplier,
- IN EFI_ATA_DEVICE_TYPE DeviceType
- );
-
-/**
- Allocate device info data structure to contain device info.
- And insert the data structure to the tail of device list for tracing.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in] DeviceType The device type of the ATA device.
- @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd.
-
- @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list.
- @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use.
-
-**/
-EFI_STATUS
-EFIAPI
-CreateNewDeviceInfo (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT16 Port,
- IN UINT16 PortMultiplier,
- IN EFI_ATA_DEVICE_TYPE DeviceType,
- IN EFI_IDENTIFY_DATA *IdentifyData
- );
-
-/**
- Destroy all attached ATA devices info.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-VOID
-EFIAPI
-DestroyDeviceInfoList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- );
-
-/**
- Destroy all pending non blocking tasks.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
- @param[in] IsSigEvent Indicate whether signal the task event when remove the
- task.
-
-**/
-VOID
-EFIAPI
-DestroyAsynTaskList (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN BOOLEAN IsSigEvent
- );
-
-/**
- Enumerate all attached ATA devices at IDE mode or AHCI mode separately.
-
- The function is designed to enumerate all attached ATA devices.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
- @retval EFI_SUCCESS Successfully enumerate attached ATA devices.
- @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
-
-**/
-EFI_STATUS
-EFIAPI
-EnumerateAttachedDevice (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- );
-
-/**
- Call back function when the timer event is signaled.
-
- @param[in] Event The Event this notify function registered to.
- @param[in] Context Pointer to the context data registered to the
- Event.
-
-**/
-VOID
-EFIAPI
-AsyncNonBlockingTransferRoutine (
- EFI_EVENT Event,
- VOID *Context
- );
-
-/**
- Sends an ATA command to an ATA device that is attached to the ATA controller. This function
- supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
- and the non-blocking I/O functionality is optional.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number of the ATA device to send the command.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
- If there is no port multiplier, then specify 0xFFFF.
- @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port
- and PortMultiplierPort.
- @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
- I/O is performed. If Event is NULL, then blocking I/O is performed. If
- Event is not NULL and non blocking I/O is supported, then non-blocking
- I/O is performed, and Event will be signaled when the ATA command completes.
-
- @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
- InTransferLength bytes were transferred from InDataBuffer. For write and
- bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
- @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
- is returned in InTransferLength. For write and bi-directional commands,
- OutTransferLength bytes were transferred by OutDataBuffer.
- @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
- already queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
- @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
- command was not sent, so no additional status information is available.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruPassThru (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort,
- IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
- IN EFI_EVENT Event OPTIONAL
- );
-
-/**
- Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
- These can either be the list of ports where ATA devices are actually present or the
- list of legal port numbers for the ATA controller. Regardless, the caller of this
- function must probe the port number returned to see if an ATA device is actually
- present at that location on the ATA controller.
-
- The GetNextPort() function retrieves the port number on an ATA controller. If on input
- Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
- in Port and EFI_SUCCESS is returned.
-
- If Port is a port number that was returned on a previous call to GetNextPort(), then the
- port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
- is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
- GetNextPort(), then EFI_INVALID_PARAMETER is returned.
-
- If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
- returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in, out] Port On input, a pointer to the port number on the ATA controller.
- On output, a pointer to the next port number on the ATA
- controller. An input value of 0xFFFF retrieves the first port
- number on the ATA controller.
-
- @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
- @retval EFI_NOT_FOUND There are no more ports on this ATA controller.
- @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
- to GetNextPort().
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetNextPort (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN OUT UINT16 *Port
- );
-
-/**
- Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
- controller. These can either be the list of port multiplier ports where ATA devices are actually
- present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
- function must probe the port number and port multiplier port number returned to see if an ATA
- device is actually present.
-
- The GetNextDevice() function retrieves the port multiplier port number of an ATA device
- present on a port of an ATA controller.
-
- If PortMultiplierPort points to a port multiplier port number value that was returned on a
- previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
- on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
- returned.
-
- If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
- ATA device on port of the ATA controller is returned in PortMultiplierPort and
- EFI_SUCCESS is returned.
-
- If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
- was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
- is returned.
-
- If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
- the ATA controller, then EFI_NOT_FOUND is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number present on the ATA controller.
- @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
- ATA device present on the ATA controller.
- If on input a PortMultiplierPort of 0xFFFF is specified,
- then the port multiplier port number of the first ATA device
- is returned. On output, a pointer to the port multiplier port
- number of the next ATA device present on an ATA controller.
-
- @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
- of the ATA controller was returned in PortMultiplierPort.
- @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
- @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
- returned on a previous call to GetNextDevice().
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetNextDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN OUT UINT16 *PortMultiplierPort
- );
-
-/**
- Used to allocate and build a device path node for an ATA device on an ATA controller.
-
- The BuildDevicePath() function allocates and builds a single device node for the ATA
- device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
- PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
- If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
- resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
-
- Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
- DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
- and EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port Port specifies the port number of the ATA device for which a
- device path node is to be allocated and built.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
- device path node is to be allocated and built. If there is no
- port multiplier, then specify 0xFFFF.
- @param[in, out] DevicePath A pointer to a single device path node that describes the ATA
- device specified by Port and PortMultiplierPort. This function
- is responsible for allocating the buffer DevicePath with the
- boot service AllocatePool(). It is the caller's responsibility
- to free DevicePath when the caller is finished with DevicePath.
- @retval EFI_SUCCESS The device path node that describes the ATA device specified by
- Port and PortMultiplierPort was allocated and returned in DevicePath.
- @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
- exist on the ATA controller.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruBuildDevicePath (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
- );
-
-/**
- Used to translate a device path node to a port number and port multiplier port number.
-
- The GetDevice() function determines the port and port multiplier port number associated with
- the ATA device described by DevicePath. If DevicePath is a device path node type that the
- ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
- DevicePath into a port number and port multiplier port number.
-
- If this translation is successful, then that port number and port multiplier port number are returned
- in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
-
- If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
-
- If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
- EFI_UNSUPPORTED is returned.
-
- If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
- a valid translation from DevicePath to a port number and port multiplier port number, then
- EFI_NOT_FOUND is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] DevicePath A pointer to the device path node that describes an ATA device on the
- ATA controller.
- @param[out] Port On return, points to the port number of an ATA device on the ATA controller.
- @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
- on the ATA controller.
-
- @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
- port number, and they were returned in Port and PortMultiplierPort.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_INVALID_PARAMETER Port is NULL.
- @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
- @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
- @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
- port number does not exist.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruGetDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT16 *Port,
- OUT UINT16 *PortMultiplierPort
- );
-
-/**
- Resets a specific port on the ATA controller. This operation also resets all the ATA devices
- connected to the port.
-
- The ResetChannel() function resets an a specific port on an ATA controller. This operation
- resets all the ATA devices connected to that port. If this ATA controller does not support
- a reset port operation, then EFI_UNSUPPORTED is returned.
-
- If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
- returned.
-
- If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
-
- If the port reset operation is completed, then EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port The port number on the ATA controller.
-
- @retval EFI_SUCCESS The ATA controller port was reset.
- @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruResetPort (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port
- );
-
-/**
- Resets an ATA device that is connected to an ATA controller.
-
- The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
- If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
- returned.
-
- If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
- EFI_INVALID_PARAMETER is returned.
-
- If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
- is returned.
-
- If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
- returned.
-
- If the device reset operation is completed, then EFI_SUCCESS is returned.
-
- @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
- @param[in] Port Port represents the port number of the ATA device to be reset.
- @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
- If there is no port multiplier, then specify 0xFFFF.
- @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
- @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
- @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
- specified by Port and PortMultiplierPort.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
- specified by Port and PortMultiplierPort.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPassThruResetDevice (
- IN EFI_ATA_PASS_THRU_PROTOCOL *This,
- IN UINT16 Port,
- IN UINT16 PortMultiplierPort
- );
-
-/**
- Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function
- supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the
- nonblocking I/O functionality is optional.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTES and it represents
- the id of the SCSI device to send the SCSI Request Packet. Each
- transport driver may choose to utilize a subset of this size to suit the needs
- of transport target representation. For example, a Fibre Channel driver
- may use only 8 bytes (WWN) to represent an FC target.
- @param Lun The LUN of the SCSI device to send the SCSI Request Packet.
- @param Packet A pointer to the SCSI Request Packet to send to the SCSI device
- specified by Target and Lun.
- @param Event If nonblocking I/O is not supported then Event is ignored, and blocking
- I/O is performed. If Event is NULL, then blocking I/O is performed. If
- Event is not NULL and non blocking I/O is supported, then
- nonblocking I/O is performed, and Event will be signaled when the
- SCSI Request Packet completes.
-
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
- commands, InTransferLength bytes were transferred from
- InDataBuffer. For write and bi-directional commands,
- OutTransferLength bytes were transferred by
- OutDataBuffer.
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that
- could be transferred is returned in InTransferLength. For write
- and bi-directional commands, OutTransferLength bytes were
- transferred by OutDataBuffer.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many
- SCSI Request Packets already queued. The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
- Packet.
- @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid.
- @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported
- by the host adapter. This includes the case of Bi-directional SCSI
- commands not supported by the implementation. The SCSI Request
- Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruPassThru (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun,
- IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
- IN EFI_EVENT Event OPTIONAL
- );
-
-/**
- Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These
- can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal
- Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the
- Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI
- channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target On input, a pointer to the Target ID (an array of size
- TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
- On output, a pointer to the Target ID (an array of
- TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
- channel. An input value of 0xF(all bytes in the array are 0xF) in the
- Target array retrieves the Target ID of the first SCSI device present on a
- SCSI channel.
- @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI
- channel. On output, a pointer to the LUN of the next SCSI device present
- on a SCSI channel.
-
- @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI
- channel was returned in Target and Lun.
- @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were
- not returned on a previous call to GetNextTargetLun().
- @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetNextTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN OUT UINT8 **Target,
- IN OUT UINT64 *Lun
- );
-
-/**
- Used to allocate and build a device path node for a SCSI device on a SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the
- Target ID of the SCSI device for which a device path node is to be
- allocated and built. Transport drivers may chose to utilize a subset of
- this size to suit the representation of targets. For example, a Fibre
- Channel driver may use only 8 bytes (WWN) in the array to represent a
- FC target.
- @param Lun The LUN of the SCSI device for which a device path node is to be
- allocated and built.
- @param DevicePath A pointer to a single device path node that describes the SCSI device
- specified by Target and Lun. This function is responsible for
- allocating the buffer DevicePath with the boot service
- AllocatePool(). It is the caller's responsibility to free
- DevicePath when the caller is finished with DevicePath.
-
- @retval EFI_SUCCESS The device path node that describes the SCSI device specified by
- Target and Lun was allocated and returned in
- DevicePath.
- @retval EFI_INVALID_PARAMETER DevicePath is NULL.
- @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist
- on the SCSI channel.
- @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruBuildDevicePath (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun,
- IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
- );
-
-/**
- Used to translate a device path node to a Target ID and LUN.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param DevicePath A pointer to a single device path node that describes the SCSI device
- on the SCSI channel.
- @param Target A pointer to the Target Array which represents the ID of a SCSI device
- on the SCSI channel.
- @param Lun A pointer to the LUN of a SCSI device on the SCSI channel.
-
- @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and
- LUN, and they were returned in Target and Lun.
- @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL.
- @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN
- does not exist.
- @retval EFI_UNSUPPORTED This driver does not support the device path node type in
- DevicePath.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT8 **Target,
- OUT UINT64 *Lun
- );
-
-/**
- Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
-
- @retval EFI_SUCCESS The SCSI channel was reset.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel.
- @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruResetChannel (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This
- );
-
-/**
- Resets a SCSI logical unit that is connected to a SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the
- target port ID of the SCSI device containing the SCSI logical unit to
- reset. Transport drivers may chose to utilize a subset of this array to suit
- the representation of their targets.
- @param Lun The LUN of the SCSI device to reset.
-
- @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset.
- @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device
- specified by Target and Lun.
- @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device
- specified by Target and Lun.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruResetTargetLun (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN UINT8 *Target,
- IN UINT64 Lun
- );
-
-/**
- Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either
- be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs
- for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to
- see if a SCSI device is actually present at that location on the SCSI channel.
-
- @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.
- @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel.
- On output, a pointer to the Target ID (an array of
- TARGET_MAX_BYTES) of the next SCSI device present on a SCSI
- channel. An input value of 0xF(all bytes in the array are 0xF) in the
- Target array retrieves the Target ID of the first SCSI device present on a
- SCSI channel.
-
- @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
- channel was returned in Target.
- @retval EFI_INVALID_PARAMETER Target or Lun is NULL.
- @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not
- returned on a previous call to GetNextTarget().
- @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtScsiPassThruGetNextTarget (
- IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This,
- IN OUT UINT8 **Target
- );
-
-/**
- Initialize ATA host controller at IDE mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeModeInitialization (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- );
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialization (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- );
-
-/**
- Start a non data transfer on specific port.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The non data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciNonDataTransfer (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-/**
- Start a DMA data transfer on specific port
-
- @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] Read The transfer direction.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in, out] MemoryAddr The pointer to the data buffer.
- @param[in] DataCount The data count to be transferred.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The DMA data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDmaTransfer (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-/**
- Start a PIO data transfer on specific port.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The number of port.
- @param[in] PortMultiplier The timeout value of stop.
- @param[in] AtapiCommand The atapi command will be used for the
- transfer.
- @param[in] AtapiCommandLength The length of the atapi command.
- @param[in] Read The transfer direction.
- @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data.
- @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data.
- @param[in, out] MemoryAddr The pointer to the data buffer.
- @param[in] DataCount The data count to be transferred.
- @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-/**
- Send ATA command into device with NON_DATA protocol
-
- @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE
- data structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data
- structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS Reading succeed
- @retval EFI_ABORTED Command failed
- @retval EFI_DEVICE_ERROR Device status error.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaNonDataCommandIn (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-/**
- Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).
-
- @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
- structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in] Read Flag used to determine the data transfer
- direction. Read equals 1, means data transferred
- from device to host;Read equals 0, means data
- transferred from host to device.
- @param[in] DataBuffer A pointer to the source buffer for the data.
- @param[in] DataLength The length of the data.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS the operation is successful.
- @retval EFI_OUT_OF_RESOURCES Build PRD table failed
- @retval EFI_UNSUPPORTED Unknown channel or operations command
- @retval EFI_DEVICE_ERROR Ata command execute failed
-
-**/
-EFI_STATUS
-EFIAPI
-AtaUdmaInOut (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN BOOLEAN Read,
- IN VOID *DataBuffer,
- IN UINT64 DataLength,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-/**
- This function is used to send out ATA commands conforms to the PIO Data In Protocol.
-
- @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
- structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in, out] Buffer A pointer to the source buffer for the data.
- @param[in] ByteCount The length of the data.
- @param[in] Read Flag used to determine the data transfer direction.
- Read equals 1, means data transferred from device
- to host;Read equals 0, means data transferred
- from host to device.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS send out the ATA command and device send required data successfully.
- @retval EFI_DEVICE_ERROR command sent failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPioDataInOut (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT VOID *Buffer,
- IN UINT64 ByteCount,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- );
-
-#endif
+/** @file + Header file for ATA/ATAPI PASS THRU driver. + + Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __ATA_ATAPI_PASS_THRU_H__ +#define __ATA_ATAPI_PASS_THRU_H__ + +#include <Uefi.h> + +#include <IndustryStandard/Pci.h> +#include <IndustryStandard/Atapi.h> +#include <IndustryStandard/Scsi.h> + +#include <Protocol/PciIo.h> +#include <Protocol/IdeControllerInit.h> +#include <Protocol/AtaPassThru.h> +#include <Protocol/ScsiPassThruExt.h> +#include <Protocol/AtaAtapiPolicy.h> + +#include <Library/DebugLib.h> +#include <Library/BaseLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/UefiDriverEntryPoint.h> +#include <Library/UefiBootServicesTableLib.h> +#include <Library/UefiLib.h> +#include <Library/PciLib.h> +#include <Library/PcdLib.h> +#include <Library/TimerLib.h> +#include <Library/MemoryAllocationLib.h> +#include <Library/ReportStatusCodeLib.h> +#include <Library/DevicePathLib.h> + +#include "IdeMode.h" +#include "AhciMode.h" + +extern EFI_DRIVER_BINDING_PROTOCOL gAtaAtapiPassThruDriverBinding; +extern EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName; +extern EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2; + +extern EDKII_ATA_ATAPI_POLICY_PROTOCOL *mAtaAtapiPolicy; + +#define ATA_ATAPI_PASS_THRU_SIGNATURE SIGNATURE_32 ('a', 'a', 'p', 't') +#define ATA_ATAPI_DEVICE_SIGNATURE SIGNATURE_32 ('a', 'd', 'e', 'v') +#define ATA_NONBLOCKING_TASK_SIGNATURE SIGNATURE_32 ('a', 't', 's', 'k') + +typedef struct _ATA_NONBLOCK_TASK ATA_NONBLOCK_TASK; + +typedef enum { + EfiAtaIdeMode, + EfiAtaAhciMode, + EfiAtaRaidMode, + EfiAtaUnknownMode +} EFI_ATA_HC_WORK_MODE; + +typedef enum { + EfiIdeCdrom, /* ATAPI CDROM */ + EfiIdeHarddisk, /* Hard Disk */ + EfiPortMultiplier, /* Port Multiplier */ + EfiIdeUnknown +} EFI_ATA_DEVICE_TYPE; + +// +// Ahci mode device info +// +typedef struct { + UINT32 Signature; + LIST_ENTRY Link; + + UINT16 Port; + UINT16 PortMultiplier; + EFI_ATA_DEVICE_TYPE Type; + + EFI_IDENTIFY_DATA *IdentifyData; +} EFI_ATA_DEVICE_INFO; + +typedef struct { + UINT32 Signature; + + EFI_HANDLE ControllerHandle; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeControllerInit; + + EFI_ATA_PASS_THRU_MODE AtaPassThruMode; + EFI_ATA_PASS_THRU_PROTOCOL AtaPassThru; + EFI_EXT_SCSI_PASS_THRU_MODE ExtScsiPassThruMode; + EFI_EXT_SCSI_PASS_THRU_PROTOCOL ExtScsiPassThru; + + EFI_ATA_HC_WORK_MODE Mode; + + EFI_IDE_REGISTERS IdeRegisters[EfiIdeMaxChannel]; + EFI_AHCI_REGISTERS AhciRegisters; + + // + // The attached device list + // + LIST_ENTRY DeviceList; + UINT64 EnabledPciAttributes; + UINT64 OriginalPciAttributes; + + // + // For AtaPassThru protocol, using the following bytes to record the previous call in + // GetNextPort()/GetNextDevice(). + // + UINT16 PreviousPort; + UINT16 PreviousPortMultiplier; + // + // For ExtScsiPassThru protocol, using the following bytes to record the previous call in + // GetNextTarget()/GetNextTargetLun(). + // + UINT16 PreviousTargetId; + UINT64 PreviousLun; + + // + // For Non-blocking. + // + EFI_EVENT TimerEvent; + LIST_ENTRY NonBlockingTaskList; +} ATA_ATAPI_PASS_THRU_INSTANCE; + +// +// Task for Non-blocking mode. +// +struct _ATA_NONBLOCK_TASK { + UINT32 Signature; + LIST_ENTRY Link; + + UINT16 Port; + UINT16 PortMultiplier; + EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet; + BOOLEAN IsStart; + EFI_EVENT Event; + UINT64 RetryTimes; + BOOLEAN InfiniteWait; + VOID *Map; // Pointer to map. + VOID *TableMap; // Pointer to PRD table map. + EFI_ATA_DMA_PRD *MapBaseAddress; // Pointer to range Base address for Map. + UINTN PageCount; // The page numbers used by PCIO freebuffer. +}; + +// +// Timeout value which uses 100ns as a unit. +// It means 3 second span. +// +#define ATA_ATAPI_TIMEOUT EFI_TIMER_PERIOD_SECONDS(3) +#define ATA_SPINUP_TIMEOUT EFI_TIMER_PERIOD_SECONDS(10) + +#define ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + ATA_ATAPI_PASS_THRU_INSTANCE, \ + AtaPassThru, \ + ATA_ATAPI_PASS_THRU_SIGNATURE \ + ) + +#define EXT_SCSI_PASS_THRU_PRIVATE_DATA_FROM_THIS(a) \ + CR (a, \ + ATA_ATAPI_PASS_THRU_INSTANCE, \ + ExtScsiPassThru, \ + ATA_ATAPI_PASS_THRU_SIGNATURE \ + ) + +#define ATA_ATAPI_DEVICE_INFO_FROM_THIS(a) \ + CR (a, \ + EFI_ATA_DEVICE_INFO, \ + Link, \ + ATA_ATAPI_DEVICE_SIGNATURE \ + ); + +#define ATA_NON_BLOCK_TASK_FROM_ENTRY(a) \ + CR (a, \ + ATA_NONBLOCK_TASK, \ + Link, \ + ATA_NONBLOCKING_TASK_SIGNATURE \ + ); + +/** + Retrieves a Unicode string that is the user readable name of the driver. + + This function retrieves the user readable name of a driver in the form of a + Unicode string. If the driver specified by This has a user readable name in + the language specified by Language, then a pointer to the driver name is + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified + by This does not support the language specified by Language, + then EFI_UNSUPPORTED is returned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the caller is + requesting, and it must match one of the + languages specified in SupportedLanguages. The + number of languages supported by a driver is up + to the driver writer. Language is specified + in RFC 4646 or ISO 639-2 language code format. + + @param DriverName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + driver specified by This in the language + specified by Language. + + @retval EFI_SUCCESS The Unicode string for the Driver specified by + This and the language specified by Language was + returned in DriverName. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER DriverName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This does not support + the language specified by Language. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruComponentNameGetDriverName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN CHAR8 *Language, + OUT CHAR16 **DriverName + ); + +/** + Retrieves a Unicode string that is the user readable name of the controller + that is being managed by a driver. + + This function retrieves the user readable name of the controller specified by + ControllerHandle and ChildHandle in the form of a Unicode string. If the + driver specified by This has a user readable name in the language specified by + Language, then a pointer to the controller name is returned in ControllerName, + and EFI_SUCCESS is returned. If the driver specified by This is not currently + managing the controller specified by ControllerHandle and ChildHandle, + then EFI_UNSUPPORTED is returned. If the driver specified by This does not + support the language specified by Language, then EFI_UNSUPPORTED is returned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param ControllerHandle[in] The handle of a controller that the driver + specified by This is managing. This handle + specifies the controller whose name is to be + returned. + + @param ChildHandle[in] The handle of the child controller to retrieve + the name of. This is an optional parameter that + may be NULL. It will be NULL for device + drivers. It will also be NULL for a bus drivers + that wish to retrieve the name of the bus + controller. It will not be NULL for a bus + driver that wishes to retrieve the name of a + child controller. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the caller is + requesting, and it must match one of the + languages specified in SupportedLanguages. The + number of languages supported by a driver is up + to the driver writer. Language is specified in + RFC 4646 or ISO 639-2 language code format. + + @param ControllerName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + controller specified by ControllerHandle and + ChildHandle in the language specified by + Language from the point of view of the driver + specified by This. + + @retval EFI_SUCCESS The Unicode string for the user readable name in + the language specified by Language for the + driver specified by This was returned in + DriverName. + + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL. + + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid + EFI_HANDLE. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER ControllerName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This is not currently + managing the controller specified by + ControllerHandle and ChildHandle. + + @retval EFI_UNSUPPORTED The driver specified by This does not support + the language specified by Language. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruComponentNameGetControllerName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_HANDLE ChildHandle OPTIONAL, + IN CHAR8 *Language, + OUT CHAR16 **ControllerName + ); + +/** + Tests to see if this driver supports a given controller. If a child device is provided, + it further tests to see if this driver supports creating a handle for the specified child device. + + This function checks to see if the driver specified by This supports the device specified by + ControllerHandle. Drivers will typically use the device path attached to + ControllerHandle and/or the services from the bus I/O abstraction attached to + ControllerHandle to determine if the driver supports ControllerHandle. This function + may be called many times during platform initialization. In order to reduce boot times, the tests + performed by this function must be very small, and take as little time as possible to execute. This + function must not change the state of any hardware devices, and this function must be aware that the + device specified by ControllerHandle may already be managed by the same driver or a + different driver. This function must match its calls to AllocatePages() with FreePages(), + AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). + Because ControllerHandle may have been previously started by the same driver, if a protocol is + already in the opened state, then it must not be closed with CloseProtocol(). This is required + to guarantee the state of ControllerHandle is not modified by this function. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to test. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For bus drivers, if this parameter is not NULL, then + the bus driver must determine if the bus controller specified + by ControllerHandle and the child controller specified + by RemainingDevicePath are both supported by this + bus driver. + + @retval EFI_SUCCESS The device specified by ControllerHandle and + RemainingDevicePath is supported by the driver specified by This. + @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by the driver + specified by This. + @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and + RemainingDevicePath is already being managed by a different + driver or an application that requires exclusive access. + Currently not implemented. + @retval EFI_UNSUPPORTED The device specified by ControllerHandle and + RemainingDevicePath is not supported by the driver specified by This. +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ); + +/** + Starts a device controller or a bus controller. + + The Start() function is designed to be invoked from the EFI boot service ConnectController(). + As a result, much of the error checking on the parameters to Start() has been moved into this + common boot service. It is legal to call Start() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE. + 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned + EFI_DEVICE_PATH_PROTOCOL. + 3. Prior to calling Start(), the Supported() function for the driver specified by This must + have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle The handle of the controller to start. This handle + must support a protocol interface that supplies + an I/O abstraction to the driver. + @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This + parameter is ignored by device drivers, and is optional for bus + drivers. For a bus driver, if this parameter is NULL, then handles + for all the children of Controller are created by this driver. + If this parameter is not NULL and the first Device Path Node is + not the End of Device Path Node, then only the handle for the + child device specified by the first Device Path Node of + RemainingDevicePath is created by this driver. + If the first Device Path Node of RemainingDevicePath is + the End of Device Path Node, no child handle is created by this + driver. + + @retval EFI_SUCCESS The device was started. + @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval Others The driver failed to start the device. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ); + +/** + Stops a device controller or a bus controller. + + The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). + As a result, much of the error checking on the parameters to Stop() has been moved + into this common boot service. It is legal to call Stop() from other locations, + but the following calling restrictions must be followed, or the system behavior will not be deterministic. + 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this + same driver's Start() function. + 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid + EFI_HANDLE. In addition, all of these handles must have been created in this driver's + Start() function, and the Start() function must have called OpenProtocol() on + ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. + @param[in] ControllerHandle A handle to the device being stopped. The handle must + support a bus specific I/O protocol for the driver + to use to stop the device. + @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. + @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL + if NumberOfChildren is 0. + + @retval EFI_SUCCESS The device was stopped. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE Controller, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer + ); + +/** + Traverse the attached ATA devices list to find out the device to access. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in] DeviceType The device type of the ATA device. + + @retval The pointer to the data structure of the device info to access. + +**/ +LIST_ENTRY * +EFIAPI +SearchDeviceInfoList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT16 Port, + IN UINT16 PortMultiplier, + IN EFI_ATA_DEVICE_TYPE DeviceType + ); + +/** + Allocate device info data structure to contain device info. + And insert the data structure to the tail of device list for tracing. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in] DeviceType The device type of the ATA device. + @param[in] IdentifyData The data buffer to store the output of the IDENTIFY cmd. + + @retval EFI_SUCCESS Successfully insert the ata device to the tail of device list. + @retval EFI_OUT_OF_RESOURCES Can not allocate enough resource for use. + +**/ +EFI_STATUS +EFIAPI +CreateNewDeviceInfo ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT16 Port, + IN UINT16 PortMultiplier, + IN EFI_ATA_DEVICE_TYPE DeviceType, + IN EFI_IDENTIFY_DATA *IdentifyData + ); + +/** + Destroy all attached ATA devices info. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +VOID +EFIAPI +DestroyDeviceInfoList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ); + +/** + Destroy all pending non blocking tasks. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + @param[in] IsSigEvent Indicate whether signal the task event when remove the + task. + +**/ +VOID +EFIAPI +DestroyAsynTaskList ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN BOOLEAN IsSigEvent + ); + +/** + Enumerate all attached ATA devices at IDE mode or AHCI mode separately. + + The function is designed to enumerate all attached ATA devices. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + + @retval EFI_SUCCESS Successfully enumerate attached ATA devices. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. + +**/ +EFI_STATUS +EFIAPI +EnumerateAttachedDevice ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ); + +/** + Call back function when the timer event is signaled. + + @param[in] Event The Event this notify function registered to. + @param[in] Context Pointer to the context data registered to the + Event. + +**/ +VOID +EFIAPI +AsyncNonBlockingTransferRoutine ( + EFI_EVENT Event, + VOID *Context + ); + +/** + Sends an ATA command to an ATA device that is attached to the ATA controller. This function + supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, + and the non-blocking I/O functionality is optional. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number of the ATA device to send the command. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command. + If there is no port multiplier, then specify 0xFFFF. + @param[in, out] Packet A pointer to the ATA command to send to the ATA device specified by Port + and PortMultiplierPort. + @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking + I/O is performed. If Event is NULL, then blocking I/O is performed. If + Event is not NULL and non blocking I/O is supported, then non-blocking + I/O is performed, and Event will be signaled when the ATA command completes. + + @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands, + InTransferLength bytes were transferred from InDataBuffer. For write and + bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer. + @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred + is returned in InTransferLength. For write and bi-directional commands, + OutTransferLength bytes were transferred by OutDataBuffer. + @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands + already queued. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command. + @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA + command was not sent, so no additional status information is available. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruPassThru ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort, + IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet, + IN EFI_EVENT Event OPTIONAL + ); + +/** + Used to retrieve the list of legal port numbers for ATA devices on an ATA controller. + These can either be the list of ports where ATA devices are actually present or the + list of legal port numbers for the ATA controller. Regardless, the caller of this + function must probe the port number returned to see if an ATA device is actually + present at that location on the ATA controller. + + The GetNextPort() function retrieves the port number on an ATA controller. If on input + Port is 0xFFFF, then the port number of the first port on the ATA controller is returned + in Port and EFI_SUCCESS is returned. + + If Port is a port number that was returned on a previous call to GetNextPort(), then the + port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS + is returned. If Port is not 0xFFFF and Port was not returned on a previous call to + GetNextPort(), then EFI_INVALID_PARAMETER is returned. + + If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is + returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in, out] Port On input, a pointer to the port number on the ATA controller. + On output, a pointer to the next port number on the ATA + controller. An input value of 0xFFFF retrieves the first port + number on the ATA controller. + + @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port. + @retval EFI_NOT_FOUND There are no more ports on this ATA controller. + @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call + to GetNextPort(). + +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetNextPort ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN OUT UINT16 *Port + ); + +/** + Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA + controller. These can either be the list of port multiplier ports where ATA devices are actually + present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this + function must probe the port number and port multiplier port number returned to see if an ATA + device is actually present. + + The GetNextDevice() function retrieves the port multiplier port number of an ATA device + present on a port of an ATA controller. + + If PortMultiplierPort points to a port multiplier port number value that was returned on a + previous call to GetNextDevice(), then the port multiplier port number of the next ATA device + on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is + returned. + + If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first + ATA device on port of the ATA controller is returned in PortMultiplierPort and + EFI_SUCCESS is returned. + + If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort + was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER + is returned. + + If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of + the ATA controller, then EFI_NOT_FOUND is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number present on the ATA controller. + @param[in, out] PortMultiplierPort On input, a pointer to the port multiplier port number of an + ATA device present on the ATA controller. + If on input a PortMultiplierPort of 0xFFFF is specified, + then the port multiplier port number of the first ATA device + is returned. On output, a pointer to the port multiplier port + number of the next ATA device present on an ATA controller. + + @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port + of the ATA controller was returned in PortMultiplierPort. + @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller. + @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not + returned on a previous call to GetNextDevice(). + +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetNextDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN OUT UINT16 *PortMultiplierPort + ); + +/** + Used to allocate and build a device path node for an ATA device on an ATA controller. + + The BuildDevicePath() function allocates and builds a single device node for the ATA + device specified by Port and PortMultiplierPort. If the ATA device specified by Port and + PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned. + If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough + resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. + + Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of + DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort, + and EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port Port specifies the port number of the ATA device for which a + device path node is to be allocated and built. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a + device path node is to be allocated and built. If there is no + port multiplier, then specify 0xFFFF. + @param[in, out] DevicePath A pointer to a single device path node that describes the ATA + device specified by Port and PortMultiplierPort. This function + is responsible for allocating the buffer DevicePath with the + boot service AllocatePool(). It is the caller's responsibility + to free DevicePath when the caller is finished with DevicePath. + @retval EFI_SUCCESS The device path node that describes the ATA device specified by + Port and PortMultiplierPort was allocated and returned in DevicePath. + @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not + exist on the ATA controller. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruBuildDevicePath ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort, + IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath + ); + +/** + Used to translate a device path node to a port number and port multiplier port number. + + The GetDevice() function determines the port and port multiplier port number associated with + the ATA device described by DevicePath. If DevicePath is a device path node type that the + ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents + DevicePath into a port number and port multiplier port number. + + If this translation is successful, then that port number and port multiplier port number are returned + in Port and PortMultiplierPort, and EFI_SUCCESS is returned. + + If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned. + + If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then + EFI_UNSUPPORTED is returned. + + If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not + a valid translation from DevicePath to a port number and port multiplier port number, then + EFI_NOT_FOUND is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] DevicePath A pointer to the device path node that describes an ATA device on the + ATA controller. + @param[out] Port On return, points to the port number of an ATA device on the ATA controller. + @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device + on the ATA controller. + + @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier + port number, and they were returned in Port and PortMultiplierPort. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_INVALID_PARAMETER Port is NULL. + @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL. + @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath. + @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier + port number does not exist. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruGetDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, + OUT UINT16 *Port, + OUT UINT16 *PortMultiplierPort + ); + +/** + Resets a specific port on the ATA controller. This operation also resets all the ATA devices + connected to the port. + + The ResetChannel() function resets an a specific port on an ATA controller. This operation + resets all the ATA devices connected to that port. If this ATA controller does not support + a reset port operation, then EFI_UNSUPPORTED is returned. + + If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is + returned. + + If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned. + + If the port reset operation is completed, then EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port The port number on the ATA controller. + + @retval EFI_SUCCESS The ATA controller port was reset. + @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruResetPort ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port + ); + +/** + Resets an ATA device that is connected to an ATA controller. + + The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort. + If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is + returned. + + If Port or PortMultiplierPort are not in a valid range for this ATA controller, then + EFI_INVALID_PARAMETER is returned. + + If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR + is returned. + + If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is + returned. + + If the device reset operation is completed, then EFI_SUCCESS is returned. + + @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance. + @param[in] Port Port represents the port number of the ATA device to be reset. + @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset. + If there is no port multiplier, then specify 0xFFFF. + @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset. + @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation. + @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device + specified by Port and PortMultiplierPort. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device + specified by Port and PortMultiplierPort. + +**/ +EFI_STATUS +EFIAPI +AtaPassThruResetDevice ( + IN EFI_ATA_PASS_THRU_PROTOCOL *This, + IN UINT16 Port, + IN UINT16 PortMultiplierPort + ); + +/** + Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. This function + supports both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the + nonblocking I/O functionality is optional. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTES and it represents + the id of the SCSI device to send the SCSI Request Packet. Each + transport driver may choose to utilize a subset of this size to suit the needs + of transport target representation. For example, a Fibre Channel driver + may use only 8 bytes (WWN) to represent an FC target. + @param Lun The LUN of the SCSI device to send the SCSI Request Packet. + @param Packet A pointer to the SCSI Request Packet to send to the SCSI device + specified by Target and Lun. + @param Event If nonblocking I/O is not supported then Event is ignored, and blocking + I/O is performed. If Event is NULL, then blocking I/O is performed. If + Event is not NULL and non blocking I/O is supported, then + nonblocking I/O is performed, and Event will be signaled when the + SCSI Request Packet completes. + + @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional + commands, InTransferLength bytes were transferred from + InDataBuffer. For write and bi-directional commands, + OutTransferLength bytes were transferred by + OutDataBuffer. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. The number of bytes that + could be transferred is returned in InTransferLength. For write + and bi-directional commands, OutTransferLength bytes were + transferred by OutDataBuffer. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Request Packets already queued. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request + Packet. + @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket are invalid. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported + by the host adapter. This includes the case of Bi-directional SCSI + commands not supported by the implementation. The SCSI Request + Packet was not sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruPassThru ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun, + IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, + IN EFI_EVENT Event OPTIONAL + ); + +/** + Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on a SCSI channel. These + can either be the list SCSI devices that are actually present on the SCSI channel, or the list of legal + Target Ids and LUNs for the SCSI channel. Regardless, the caller of this function must probe the + Target ID and LUN returned to see if a SCSI device is actually present at that location on the SCSI + channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target On input, a pointer to the Target ID (an array of size + TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. + On output, a pointer to the Target ID (an array of + TARGET_MAX_BYTES) of the next SCSI device present on a SCSI + channel. An input value of 0xF(all bytes in the array are 0xF) in the + Target array retrieves the Target ID of the first SCSI device present on a + SCSI channel. + @param Lun On input, a pointer to the LUN of a SCSI device present on the SCSI + channel. On output, a pointer to the LUN of the next SCSI device present + on a SCSI channel. + + @retval EFI_SUCCESS The Target ID and LUN of the next SCSI device on the SCSI + channel was returned in Target and Lun. + @retval EFI_INVALID_PARAMETER Target array is not all 0xF, and Target and Lun were + not returned on a previous call to GetNextTargetLun(). + @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetNextTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN OUT UINT8 **Target, + IN OUT UINT64 *Lun + ); + +/** + Used to allocate and build a device path node for a SCSI device on a SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTES and it specifies the + Target ID of the SCSI device for which a device path node is to be + allocated and built. Transport drivers may chose to utilize a subset of + this size to suit the representation of targets. For example, a Fibre + Channel driver may use only 8 bytes (WWN) in the array to represent a + FC target. + @param Lun The LUN of the SCSI device for which a device path node is to be + allocated and built. + @param DevicePath A pointer to a single device path node that describes the SCSI device + specified by Target and Lun. This function is responsible for + allocating the buffer DevicePath with the boot service + AllocatePool(). It is the caller's responsibility to free + DevicePath when the caller is finished with DevicePath. + + @retval EFI_SUCCESS The device path node that describes the SCSI device specified by + Target and Lun was allocated and returned in + DevicePath. + @retval EFI_INVALID_PARAMETER DevicePath is NULL. + @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does not exist + on the SCSI channel. + @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruBuildDevicePath ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun, + IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath + ); + +/** + Used to translate a device path node to a Target ID and LUN. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param DevicePath A pointer to a single device path node that describes the SCSI device + on the SCSI channel. + @param Target A pointer to the Target Array which represents the ID of a SCSI device + on the SCSI channel. + @param Lun A pointer to the LUN of a SCSI device on the SCSI channel. + + @retval EFI_SUCCESS DevicePath was successfully translated to a Target ID and + LUN, and they were returned in Target and Lun. + @retval EFI_INVALID_PARAMETER DevicePath or Target or Lun is NULL. + @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target ID and LUN + does not exist. + @retval EFI_UNSUPPORTED This driver does not support the device path node type in + DevicePath. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, + OUT UINT8 **Target, + OUT UINT64 *Lun + ); + +/** + Resets a SCSI channel. This operation resets all the SCSI devices connected to the SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + + @retval EFI_SUCCESS The SCSI channel was reset. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI channel. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI channel. + @retval EFI_UNSUPPORTED The SCSI channel does not support a channel reset operation. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruResetChannel ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This + ); + +/** + Resets a SCSI logical unit that is connected to a SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target The Target is an array of size TARGET_MAX_BYTE and it represents the + target port ID of the SCSI device containing the SCSI logical unit to + reset. Transport drivers may chose to utilize a subset of this array to suit + the representation of their targets. + @param Lun The LUN of the SCSI device to reset. + + @retval EFI_SUCCESS The SCSI device specified by Target and Lun was reset. + @retval EFI_INVALID_PARAMETER Target or Lun is NULL. + @retval EFI_TIMEOUT A timeout occurred while attempting to reset the SCSI device + specified by Target and Lun. + @retval EFI_UNSUPPORTED The SCSI channel does not support a target reset operation. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the SCSI device + specified by Target and Lun. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruResetTargetLun ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN UINT8 *Target, + IN UINT64 Lun + ); + +/** + Used to retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. These can either + be the list SCSI devices that are actually present on the SCSI channel, or the list of legal Target IDs + for the SCSI channel. Regardless, the caller of this function must probe the Target ID returned to + see if a SCSI device is actually present at that location on the SCSI channel. + + @param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. + @param Target (TARGET_MAX_BYTES) of a SCSI device present on the SCSI channel. + On output, a pointer to the Target ID (an array of + TARGET_MAX_BYTES) of the next SCSI device present on a SCSI + channel. An input value of 0xF(all bytes in the array are 0xF) in the + Target array retrieves the Target ID of the first SCSI device present on a + SCSI channel. + + @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI + channel was returned in Target. + @retval EFI_INVALID_PARAMETER Target or Lun is NULL. + @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not + returned on a previous call to GetNextTarget(). + @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. + +**/ +EFI_STATUS +EFIAPI +ExtScsiPassThruGetNextTarget ( + IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, + IN OUT UINT8 **Target + ); + +/** + Initialize ATA host controller at IDE mode. + + The function is designed to initialize ATA host controller. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +EFI_STATUS +EFIAPI +IdeModeInitialization ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ); + +/** + Initialize ATA host controller at AHCI mode. + + The function is designed to initialize ATA host controller. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +EFI_STATUS +EFIAPI +AhciModeInitialization ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ); + +/** + Start a non data transfer on specific port. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The non data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The non data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciNonDataTransfer ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +/** + Start a DMA data transfer on specific port + + @param[in] Instance The ATA_ATAPI_PASS_THRU_INSTANCE protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] Read The transfer direction. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in, out] MemoryAddr The pointer to the data buffer. + @param[in] DataCount The data count to be transferred. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The DMA data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The DMA data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciDmaTransfer ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN OUT VOID *MemoryAddr, + IN UINT32 DataCount, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +/** + Start a PIO data transfer on specific port. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS. + @param[in] Port The number of port. + @param[in] PortMultiplier The timeout value of stop. + @param[in] AtapiCommand The atapi command will be used for the + transfer. + @param[in] AtapiCommandLength The length of the atapi command. + @param[in] Read The transfer direction. + @param[in] AtaCommandBlock The EFI_ATA_COMMAND_BLOCK data. + @param[in, out] AtaStatusBlock The EFI_ATA_STATUS_BLOCK data. + @param[in, out] MemoryAddr The pointer to the data buffer. + @param[in] DataCount The data count to be transferred. + @param[in] Timeout The timeout value of non data transfer, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_DEVICE_ERROR The PIO data transfer abort with error occurs. + @retval EFI_TIMEOUT The operation is time out. + @retval EFI_UNSUPPORTED The device is not ready for transfer. + @retval EFI_SUCCESS The PIO data transfer executes successfully. + +**/ +EFI_STATUS +EFIAPI +AhciPioTransfer ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_AHCI_REGISTERS *AhciRegisters, + IN UINT8 Port, + IN UINT8 PortMultiplier, + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL, + IN UINT8 AtapiCommandLength, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN OUT VOID *MemoryAddr, + IN UINT32 DataCount, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +/** + Send ATA command into device with NON_DATA protocol + + @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE + data structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data + structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS Reading succeed + @retval EFI_ABORTED Command failed + @retval EFI_DEVICE_ERROR Device status error. + +**/ +EFI_STATUS +EFIAPI +AtaNonDataCommandIn ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +/** + Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt). + + @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data + structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in] Read Flag used to determine the data transfer + direction. Read equals 1, means data transferred + from device to host;Read equals 0, means data + transferred from host to device. + @param[in] DataBuffer A pointer to the source buffer for the data. + @param[in] DataLength The length of the data. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS the operation is successful. + @retval EFI_OUT_OF_RESOURCES Build PRD table failed + @retval EFI_UNSUPPORTED Unknown channel or operations command + @retval EFI_DEVICE_ERROR Ata command execute failed + +**/ +EFI_STATUS +EFIAPI +AtaUdmaInOut ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN BOOLEAN Read, + IN VOID *DataBuffer, + IN UINT64 DataLength, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +/** + This function is used to send out ATA commands conforms to the PIO Data In Protocol. + + @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data + structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in, out] Buffer A pointer to the source buffer for the data. + @param[in] ByteCount The length of the data. + @param[in] Read Flag used to determine the data transfer direction. + Read equals 1, means data transferred from device + to host;Read equals 0, means data transferred + from host to device. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS send out the ATA command and device send required data successfully. + @retval EFI_DEVICE_ERROR command sent failed. + +**/ +EFI_STATUS +EFIAPI +AtaPioDataInOut ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN OUT VOID *Buffer, + IN UINT64 ByteCount, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ); + +#endif diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf index 78caa3c458..e3c653f0fc 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf @@ -1,75 +1,75 @@ -## @file
-# AtaAtapiPassThru driver to provide native IDE/AHCI mode support.
-#
-# This driver installs AtaPassThru and ExtScsiPassThru protocol in each ide/sata controller
-# to access to all attached Ata/Atapi devices.
-#
-# Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
-#
-# SPDX-License-Identifier: BSD-2-Clause-Patent
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = AtaAtapiPassThruDxe
- MODULE_UNI_FILE = AtaAtapiPassThruDxe.uni
- FILE_GUID = 5E523CB4-D397-4986-87BD-A6DD8B22F455
- MODULE_TYPE = UEFI_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = InitializeAtaAtapiPassThru
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 EBC
-#
-# DRIVER_BINDING = gAtaAtapiPassThruDriverBinding
-# COMPONENT_NAME = gAtaAtapiPassThruComponentName
-# COMPONENT_NAME2 = gAtaAtapiPassThruComponentName2
-#
-#
-
-[Sources]
- AtaAtapiPassThru.c
- AtaAtapiPassThru.h
- AhciMode.c
- AhciMode.h
- IdeMode.c
- IdeMode.h
- ComponentName.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
-
-[LibraryClasses]
- DevicePathLib
- UefiBootServicesTableLib
- MemoryAllocationLib
- BaseMemoryLib
- UefiLib
- BaseLib
- UefiDriverEntryPoint
- DebugLib
- TimerLib
- ReportStatusCodeLib
- PcdLib
-
-[Protocols]
- gEfiAtaPassThruProtocolGuid ## BY_START
- gEfiExtScsiPassThruProtocolGuid ## BY_START
- gEfiIdeControllerInitProtocolGuid ## TO_START
- gEfiDevicePathProtocolGuid ## TO_START
- gEfiPciIoProtocolGuid ## TO_START
- gEdkiiAtaAtapiPolicyProtocolGuid ## CONSUMES
-
-[Pcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable ## SOMETIMES_CONSUMES
- gEfiMdeModulePkgTokenSpaceGuid.PcdAhciCommandRetryCount ## SOMETIMES_CONSUMES
-
-# [Event]
-# EVENT_TYPE_PERIODIC_TIMER ## SOMETIMES_CONSUMES
-
-[UserExtensions.TianoCore."ExtraFiles"]
- AtaAtapiPassThruDxeExtra.uni
+## @file +# AtaAtapiPassThru driver to provide native IDE/AHCI mode support. +# +# This driver installs AtaPassThru and ExtScsiPassThru protocol in each ide/sata controller +# to access to all attached Ata/Atapi devices. +# +# Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> +# +# SPDX-License-Identifier: BSD-2-Clause-Patent +# +## + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = AtaAtapiPassThruDxe + MODULE_UNI_FILE = AtaAtapiPassThruDxe.uni + FILE_GUID = 5E523CB4-D397-4986-87BD-A6DD8B22F455 + MODULE_TYPE = UEFI_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = InitializeAtaAtapiPassThru + +# +# The following information is for reference only and not required by the build tools. +# +# VALID_ARCHITECTURES = IA32 X64 EBC +# +# DRIVER_BINDING = gAtaAtapiPassThruDriverBinding +# COMPONENT_NAME = gAtaAtapiPassThruComponentName +# COMPONENT_NAME2 = gAtaAtapiPassThruComponentName2 +# +# + +[Sources] + AtaAtapiPassThru.c + AtaAtapiPassThru.h + AhciMode.c + AhciMode.h + IdeMode.c + IdeMode.h + ComponentName.c + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + +[LibraryClasses] + DevicePathLib + UefiBootServicesTableLib + MemoryAllocationLib + BaseMemoryLib + UefiLib + BaseLib + UefiDriverEntryPoint + DebugLib + TimerLib + ReportStatusCodeLib + PcdLib + +[Protocols] + gEfiAtaPassThruProtocolGuid ## BY_START + gEfiExtScsiPassThruProtocolGuid ## BY_START + gEfiIdeControllerInitProtocolGuid ## TO_START + gEfiDevicePathProtocolGuid ## TO_START + gEfiPciIoProtocolGuid ## TO_START + gEdkiiAtaAtapiPolicyProtocolGuid ## CONSUMES + +[Pcd] + gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable ## SOMETIMES_CONSUMES + gEfiMdeModulePkgTokenSpaceGuid.PcdAhciCommandRetryCount ## SOMETIMES_CONSUMES + +# [Event] +# EVENT_TYPE_PERIODIC_TIMER ## SOMETIMES_CONSUMES + +[UserExtensions.TianoCore."ExtraFiles"] + AtaAtapiPassThruDxeExtra.uni diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni index 2223779b92..69db1309f1 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxe.uni @@ -1,17 +1,17 @@ -// /** @file
-// AtaAtapiPassThru driver to provide native IDE/AHCI mode support.
-//
-// This driver installs AtaPassThru and ExtScsiPassThru protocol in each ide/sata controller
-// to access to all attached Ata/Atapi devices.
-//
-// Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
-//
-// SPDX-License-Identifier: BSD-2-Clause-Patent
-//
-// **/
-
-
-#string STR_MODULE_ABSTRACT #language en-US "AtaAtapiPassThru driver to provide native IDE/AHCI mode support."
-
-#string STR_MODULE_DESCRIPTION #language en-US "This driver installs AtaPassThru and ExtScsiPassThru protocols in each IDE/SATA controller to access to all attached ATA/ATAPI devices."
-
+// /** @file +// AtaAtapiPassThru driver to provide native IDE/AHCI mode support. +// +// This driver installs AtaPassThru and ExtScsiPassThru protocol in each ide/sata controller +// to access to all attached Ata/Atapi devices. +// +// Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR> +// +// SPDX-License-Identifier: BSD-2-Clause-Patent +// +// **/ + + +#string STR_MODULE_ABSTRACT #language en-US "AtaAtapiPassThru driver to provide native IDE/AHCI mode support." + +#string STR_MODULE_DESCRIPTION #language en-US "This driver installs AtaPassThru and ExtScsiPassThru protocols in each IDE/SATA controller to access to all attached ATA/ATAPI devices." + diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni index f64154c9fe..90673b1f85 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThruDxeExtra.uni @@ -1,14 +1,14 @@ -// /** @file
-// AtaAtapiPassThruDxe Localized Strings and Content
-//
-// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>
-//
-// SPDX-License-Identifier: BSD-2-Clause-Patent
-//
-// **/
-
-#string STR_PROPERTIES_MODULE_NAME
-#language en-US
-"ATA ATAPI Pass Thru DXE Driver"
-
-
+// /** @file +// AtaAtapiPassThruDxe Localized Strings and Content +// +// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR> +// +// SPDX-License-Identifier: BSD-2-Clause-Patent +// +// **/ + +#string STR_PROPERTIES_MODULE_NAME +#language en-US +"ATA ATAPI Pass Thru DXE Driver" + + diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c index cda5dbe8cd..f7db836adf 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/ComponentName.c @@ -1,244 +1,244 @@ -/** @file
- UEFI Component Name(2) protocol implementation for AtaAtapiPassThru driver.
-
- Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "AtaAtapiPassThru.h"
-
-//
-// Driver name table
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruDriverNameTable[] = {
- { "eng;en", L"AtaAtapiPassThru Driver" },
- { NULL, NULL }
-};
-
-//
-// Controller name table
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruIdeControllerNameTable[] = {
- { "eng;en", L"IDE Controller" },
- { NULL, NULL }
-};
-
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruAhciControllerNameTable[] = {
- { "eng;en", L"AHCI Controller" },
- { NULL, NULL }
-};
-
-//
-// EFI Component Name Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName = {
- AtaAtapiPassThruComponentNameGetDriverName,
- AtaAtapiPassThruComponentNameGetControllerName,
- "eng"
-};
-
-//
-// EFI Component Name 2 Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2 = {
- (EFI_COMPONENT_NAME2_GET_DRIVER_NAME)AtaAtapiPassThruComponentNameGetDriverName,
- (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME)AtaAtapiPassThruComponentNameGetControllerName,
- "en"
-};
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-{
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- mAtaAtapiPassThruDriverNameTable,
- DriverName,
- (BOOLEAN)(This == &gAtaAtapiPassThruComponentName)
- );
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaAtapiPassThruComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-{
- EFI_STATUS Status;
- EFI_UNICODE_STRING_TABLE *ControllerNameTable;
- VOID *Interface;
- ATA_ATAPI_PASS_THRU_INSTANCE *Instance;
-
- if ((Language == NULL) || (ControllerName == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // This is a device driver, so ChildHandle must be NULL.
- //
- if (ChildHandle != NULL) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Make sure this driver is currently managing Controller Handle
- //
- Status = EfiTestManagedDevice (
- ControllerHandle,
- gAtaAtapiPassThruDriverBinding.DriverBindingHandle,
- &gEfiIdeControllerInitProtocolGuid
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // AtaPassThru and ExtScsiPassThru should also be installed at the controller handle.
- //
- Status = gBS->OpenProtocol (
- ControllerHandle,
- &gEfiAtaPassThruProtocolGuid,
- &Interface,
- gAtaAtapiPassThruDriverBinding.DriverBindingHandle,
- ControllerHandle,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR (Status)) {
- return EFI_UNSUPPORTED;
- }
-
- Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (Interface);
-
- if (Instance->Mode == EfiAtaIdeMode) {
- ControllerNameTable = mAtaAtapiPassThruIdeControllerNameTable;
- } else if (Instance->Mode == EfiAtaAhciMode) {
- ControllerNameTable = mAtaAtapiPassThruAhciControllerNameTable;
- } else {
- return EFI_UNSUPPORTED;
- }
-
- return LookupUnicodeString2 (
- Language,
- This->SupportedLanguages,
- ControllerNameTable,
- ControllerName,
- (BOOLEAN)(This == &gAtaAtapiPassThruComponentName)
- );
-}
+/** @file + UEFI Component Name(2) protocol implementation for AtaAtapiPassThru driver. + + Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include "AtaAtapiPassThru.h" + +// +// Driver name table +// +GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruDriverNameTable[] = { + { "eng;en", L"AtaAtapiPassThru Driver" }, + { NULL, NULL } +}; + +// +// Controller name table +// +GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruIdeControllerNameTable[] = { + { "eng;en", L"IDE Controller" }, + { NULL, NULL } +}; + +GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mAtaAtapiPassThruAhciControllerNameTable[] = { + { "eng;en", L"AHCI Controller" }, + { NULL, NULL } +}; + +// +// EFI Component Name Protocol +// +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gAtaAtapiPassThruComponentName = { + AtaAtapiPassThruComponentNameGetDriverName, + AtaAtapiPassThruComponentNameGetControllerName, + "eng" +}; + +// +// EFI Component Name 2 Protocol +// +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gAtaAtapiPassThruComponentName2 = { + (EFI_COMPONENT_NAME2_GET_DRIVER_NAME)AtaAtapiPassThruComponentNameGetDriverName, + (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME)AtaAtapiPassThruComponentNameGetControllerName, + "en" +}; + +/** + Retrieves a Unicode string that is the user readable name of the driver. + + This function retrieves the user readable name of a driver in the form of a + Unicode string. If the driver specified by This has a user readable name in + the language specified by Language, then a pointer to the driver name is + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified + by This does not support the language specified by Language, + then EFI_UNSUPPORTED is returned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the caller is + requesting, and it must match one of the + languages specified in SupportedLanguages. The + number of languages supported by a driver is up + to the driver writer. Language is specified + in RFC 4646 or ISO 639-2 language code format. + + @param DriverName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + driver specified by This in the language + specified by Language. + + @retval EFI_SUCCESS The Unicode string for the Driver specified by + This and the language specified by Language was + returned in DriverName. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER DriverName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This does not support + the language specified by Language. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruComponentNameGetDriverName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN CHAR8 *Language, + OUT CHAR16 **DriverName + ) +{ + return LookupUnicodeString2 ( + Language, + This->SupportedLanguages, + mAtaAtapiPassThruDriverNameTable, + DriverName, + (BOOLEAN)(This == &gAtaAtapiPassThruComponentName) + ); +} + +/** + Retrieves a Unicode string that is the user readable name of the controller + that is being managed by a driver. + + This function retrieves the user readable name of the controller specified by + ControllerHandle and ChildHandle in the form of a Unicode string. If the + driver specified by This has a user readable name in the language specified by + Language, then a pointer to the controller name is returned in ControllerName, + and EFI_SUCCESS is returned. If the driver specified by This is not currently + managing the controller specified by ControllerHandle and ChildHandle, + then EFI_UNSUPPORTED is returned. If the driver specified by This does not + support the language specified by Language, then EFI_UNSUPPORTED is returned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param ControllerHandle[in] The handle of a controller that the driver + specified by This is managing. This handle + specifies the controller whose name is to be + returned. + + @param ChildHandle[in] The handle of the child controller to retrieve + the name of. This is an optional parameter that + may be NULL. It will be NULL for device + drivers. It will also be NULL for a bus drivers + that wish to retrieve the name of the bus + controller. It will not be NULL for a bus + driver that wishes to retrieve the name of a + child controller. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the caller is + requesting, and it must match one of the + languages specified in SupportedLanguages. The + number of languages supported by a driver is up + to the driver writer. Language is specified in + RFC 4646 or ISO 639-2 language code format. + + @param ControllerName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + controller specified by ControllerHandle and + ChildHandle in the language specified by + Language from the point of view of the driver + specified by This. + + @retval EFI_SUCCESS The Unicode string for the user readable name in + the language specified by Language for the + driver specified by This was returned in + DriverName. + + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL. + + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid + EFI_HANDLE. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER ControllerName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This is not currently + managing the controller specified by + ControllerHandle and ChildHandle. + + @retval EFI_UNSUPPORTED The driver specified by This does not support + the language specified by Language. + +**/ +EFI_STATUS +EFIAPI +AtaAtapiPassThruComponentNameGetControllerName ( + IN EFI_COMPONENT_NAME_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_HANDLE ChildHandle OPTIONAL, + IN CHAR8 *Language, + OUT CHAR16 **ControllerName + ) +{ + EFI_STATUS Status; + EFI_UNICODE_STRING_TABLE *ControllerNameTable; + VOID *Interface; + ATA_ATAPI_PASS_THRU_INSTANCE *Instance; + + if ((Language == NULL) || (ControllerName == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // This is a device driver, so ChildHandle must be NULL. + // + if (ChildHandle != NULL) { + return EFI_UNSUPPORTED; + } + + // + // Make sure this driver is currently managing Controller Handle + // + Status = EfiTestManagedDevice ( + ControllerHandle, + gAtaAtapiPassThruDriverBinding.DriverBindingHandle, + &gEfiIdeControllerInitProtocolGuid + ); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // AtaPassThru and ExtScsiPassThru should also be installed at the controller handle. + // + Status = gBS->OpenProtocol ( + ControllerHandle, + &gEfiAtaPassThruProtocolGuid, + &Interface, + gAtaAtapiPassThruDriverBinding.DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_GET_PROTOCOL + ); + if (EFI_ERROR (Status)) { + return EFI_UNSUPPORTED; + } + + Instance = ATA_PASS_THRU_PRIVATE_DATA_FROM_THIS (Interface); + + if (Instance->Mode == EfiAtaIdeMode) { + ControllerNameTable = mAtaAtapiPassThruIdeControllerNameTable; + } else if (Instance->Mode == EfiAtaAhciMode) { + ControllerNameTable = mAtaAtapiPassThruAhciControllerNameTable; + } else { + return EFI_UNSUPPORTED; + } + + return LookupUnicodeString2 ( + Language, + This->SupportedLanguages, + ControllerNameTable, + ControllerName, + (BOOLEAN)(This == &gAtaAtapiPassThruComponentName) + ); +} diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c index 19d7b4930c..0e964ac146 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.c @@ -1,2676 +1,2676 @@ -/** @file
- Header file for AHCI mode of ATA host controller.
-
- Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#include "AtaAtapiPassThru.h"
-
-/**
- read a one-byte data from a IDE port.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port The IDE Port number
-
- @return the one-byte data read from IDE port
-**/
-UINT8
-EFIAPI
-IdeReadPortB (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port
- )
-{
- UINT8 Data;
-
- ASSERT (PciIo != NULL);
-
- Data = 0;
- //
- // perform 1-byte data read from register
- //
- PciIo->Io.Read (
- PciIo,
- EfiPciIoWidthUint8,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- 1,
- &Data
- );
- return Data;
-}
-
-/**
- write a 1-byte data to a specific IDE port.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port The IDE port to be written
- @param Data The data to write to the port
-**/
-VOID
-EFIAPI
-IdeWritePortB (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port,
- IN UINT8 Data
- )
-{
- ASSERT (PciIo != NULL);
-
- //
- // perform 1-byte data write to register
- //
- PciIo->Io.Write (
- PciIo,
- EfiPciIoWidthUint8,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- 1,
- &Data
- );
-}
-
-/**
- write a 1-word data to a specific IDE port.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port The IDE port to be written
- @param Data The data to write to the port
-**/
-VOID
-EFIAPI
-IdeWritePortW (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port,
- IN UINT16 Data
- )
-{
- ASSERT (PciIo != NULL);
-
- //
- // perform 1-word data write to register
- //
- PciIo->Io.Write (
- PciIo,
- EfiPciIoWidthUint16,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- 1,
- &Data
- );
-}
-
-/**
- write a 2-word data to a specific IDE port.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port The IDE port to be written
- @param Data The data to write to the port
-**/
-VOID
-EFIAPI
-IdeWritePortDW (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port,
- IN UINT32 Data
- )
-{
- ASSERT (PciIo != NULL);
-
- //
- // perform 2-word data write to register
- //
- PciIo->Io.Write (
- PciIo,
- EfiPciIoWidthUint32,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- 1,
- &Data
- );
-}
-
-/**
- Write multiple words of data to the IDE data port.
- Call the IO abstraction once to do the complete read,
- not one word at a time
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port IO port to read
- @param Count No. of UINT16's to read
- @param Buffer Pointer to the data buffer for read
-
-**/
-VOID
-EFIAPI
-IdeWritePortWMultiple (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- ASSERT (PciIo != NULL);
- ASSERT (Buffer != NULL);
-
- //
- // perform UINT16 data write to the FIFO
- //
- PciIo->Io.Write (
- PciIo,
- EfiPciIoWidthFifoUint16,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- Count,
- (UINT16 *)Buffer
- );
-}
-
-/**
- Reads multiple words of data from the IDE data port.
- Call the IO abstraction once to do the complete read,
- not one word at a time
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure
- @param Port IO port to read
- @param Count Number of UINT16's to read
- @param Buffer Pointer to the data buffer for read
-
-**/
-VOID
-EFIAPI
-IdeReadPortWMultiple (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN UINT16 Port,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- ASSERT (PciIo != NULL);
- ASSERT (Buffer != NULL);
-
- //
- // Perform UINT16 data read from FIFO
- //
- PciIo->Io.Read (
- PciIo,
- EfiPciIoWidthFifoUint16,
- EFI_PCI_IO_PASS_THROUGH_BAR,
- (UINT64)Port,
- Count,
- (UINT16 *)Buffer
- );
-}
-
-/**
- This function is used to analyze the Status Register and print out
- some debug information and if there is ERR bit set in the Status
- Register, the Error Register's value is also be parsed and print out.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
-**/
-VOID
-EFIAPI
-DumpAllIdeRegisters (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_ATA_STATUS_BLOCK StatusBlock;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- ZeroMem (&StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
-
- StatusBlock.AtaStatus = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
- StatusBlock.AtaError = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
- StatusBlock.AtaSectorCount = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
- StatusBlock.AtaSectorCountExp = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
- StatusBlock.AtaSectorNumber = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
- StatusBlock.AtaSectorNumberExp = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
- StatusBlock.AtaCylinderLow = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
- StatusBlock.AtaCylinderLowExp = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
- StatusBlock.AtaCylinderHigh = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
- StatusBlock.AtaCylinderHighExp = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
- StatusBlock.AtaDeviceHead = IdeReadPortB (PciIo, IdeRegisters->Head);
-
- if (AtaStatusBlock != NULL) {
- //
- // Dump the content of all ATA registers.
- //
- CopyMem (AtaStatusBlock, &StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK));
- }
-
- DEBUG_CODE_BEGIN ();
- if ((StatusBlock.AtaStatus & ATA_STSREG_DWF) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Write Fault\n", StatusBlock.AtaStatus));
- }
-
- if ((StatusBlock.AtaStatus & ATA_STSREG_CORR) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Corrected Data\n", StatusBlock.AtaStatus));
- }
-
- if ((StatusBlock.AtaStatus & ATA_STSREG_ERR) != 0) {
- if ((StatusBlock.AtaError & ATA_ERRREG_BBK) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Bad Block Detected\n", StatusBlock.AtaError));
- }
-
- if ((StatusBlock.AtaError & ATA_ERRREG_UNC) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Uncorrectable Data\n", StatusBlock.AtaError));
- }
-
- if ((StatusBlock.AtaError & ATA_ERRREG_MC) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Media Change\n", StatusBlock.AtaError));
- }
-
- if ((StatusBlock.AtaError & ATA_ERRREG_ABRT) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Abort\n", StatusBlock.AtaError));
- }
-
- if ((StatusBlock.AtaError & ATA_ERRREG_TK0NF) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Track 0 Not Found\n", StatusBlock.AtaError));
- }
-
- if ((StatusBlock.AtaError & ATA_ERRREG_AMNF) != 0) {
- DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Address Mark Not Found\n", StatusBlock.AtaError));
- }
- }
-
- DEBUG_CODE_END ();
-}
-
-/**
- This function is used to analyze the Status Register at the condition that BSY is zero.
- if there is ERR bit set in the Status Register, then return error.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
-
- @retval EFI_SUCCESS No err information in the Status Register.
- @retval EFI_DEVICE_ERROR Any err information in the Status Register.
-
-**/
-EFI_STATUS
-EFIAPI
-CheckStatusRegister (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- UINT8 StatusRegister;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
-
- if ((StatusRegister & ATA_STSREG_BSY) == 0) {
- if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) {
- return EFI_SUCCESS;
- } else {
- return EFI_DEVICE_ERROR;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is used to poll for the DRQ bit clear in the Status
- Register. DRQ is cleared when the device is finished transferring data.
- So this function is called after data transfer is finished.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS DRQ bit clear within the time out.
-
- @retval EFI_TIMEOUT DRQ bit not clear within the time out.
-
- @note
- Read Status Register will clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQClear (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT8 StatusRegister;
- BOOLEAN InfiniteWait;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
- do {
- StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
-
- //
- // Wait for BSY == 0, then judge if DRQ is clear
- //
- if ((StatusRegister & ATA_STSREG_BSY) == 0) {
- if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- This function is used to poll for the DRQ bit clear in the Alternate
- Status Register. DRQ is cleared when the device is finished
- transferring data. So this function is called after data transfer
- is finished.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS DRQ bit clear within the time out.
-
- @retval EFI_TIMEOUT DRQ bit not clear within the time out.
- @note Read Alternate Status Register will not clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQClear2 (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT8 AltRegister;
- BOOLEAN InfiniteWait;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
- do {
- AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
-
- //
- // Wait for BSY == 0, then judge if DRQ is clear
- //
- if ((AltRegister & ATA_STSREG_BSY) == 0) {
- if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- This function is used to poll for the DRQ bit set in the
- Status Register.
- DRQ is set when the device is ready to transfer data. So this function
- is called after the command is sent to the device and before required
- data is transferred.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS BSY bit cleared and DRQ bit set within the
- timeout.
-
- @retval EFI_TIMEOUT BSY bit not cleared within the timeout.
-
- @retval EFI_ABORTED Polling abandoned due to command abort.
-
- @retval EFI_DEVICE_ERROR Polling abandoned due to a non-abort error.
-
- @retval EFI_NOT_READY BSY bit cleared within timeout, and device
- reported "command complete" by clearing DRQ
- bit.
-
- @note Read Status Register will clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQReady (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT8 StatusRegister;
- UINT8 ErrorRegister;
- BOOLEAN InfiniteWait;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
- do {
- //
- // Read Status Register will clear interrupt
- //
- StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
-
- //
- // Wait for BSY == 0, then judge if DRQ is clear or ERR is set
- //
- if ((StatusRegister & ATA_STSREG_BSY) == 0) {
- if ((StatusRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
- ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
-
- if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
- return EFI_ABORTED;
- }
-
- return EFI_DEVICE_ERROR;
- }
-
- if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_READY;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- This function is used to poll for the DRQ bit set in the Alternate Status Register.
- DRQ is set when the device is ready to transfer data. So this function is called after
- the command is sent to the device and before required data is transferred.
-
- @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS BSY bit cleared and DRQ bit set within the
- timeout.
-
- @retval EFI_TIMEOUT BSY bit not cleared within the timeout.
-
- @retval EFI_ABORTED Polling abandoned due to command abort.
-
- @retval EFI_DEVICE_ERROR Polling abandoned due to a non-abort error.
-
- @retval EFI_NOT_READY BSY bit cleared within timeout, and device
- reported "command complete" by clearing DRQ
- bit.
-
- @note Read Alternate Status Register will not clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQReady2 (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT8 AltRegister;
- UINT8 ErrorRegister;
- BOOLEAN InfiniteWait;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
-
- do {
- //
- // Read Alternate Status Register will not clear interrupt status
- //
- AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
- //
- // Wait for BSY == 0, then judge if DRQ is clear or ERR is set
- //
- if ((AltRegister & ATA_STSREG_BSY) == 0) {
- if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
- ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature);
-
- if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
- return EFI_ABORTED;
- }
-
- return EFI_DEVICE_ERROR;
- }
-
- if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_READY;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- This function is used to poll for the BSY bit clear in the Status Register. BSY
- is clear when the device is not busy. Every command must be sent after device is not busy.
-
- @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS BSY bit clear within the time out.
- @retval EFI_TIMEOUT BSY bit not clear within the time out.
-
- @note Read Status Register will clear interrupt status.
-**/
-EFI_STATUS
-EFIAPI
-WaitForBSYClear (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT64 Delay;
- UINT8 StatusRegister;
- BOOLEAN InfiniteWait;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
- do {
- StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
-
- if ((StatusRegister & ATA_STSREG_BSY) == 0x00) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return EFI_TIMEOUT;
-}
-
-/**
- Get IDE i/o port registers' base addresses by mode.
-
- In 'Compatibility' mode, use fixed addresses.
- In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
- Configuration Space.
-
- The steps to get IDE i/o port registers' base addresses for each channel
- as follows:
-
- 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
- controller's Configuration Space to determine the operating mode.
-
- 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
- ___________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|_______________|_______________|
- | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
- |___________|_______________|_______________|
- | Secondary | 170h - 177h | 376h - 377h |
- |___________|_______________|_______________|
-
- Table 1. Compatibility resource mappings
-
- b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
- in IDE controller's PCI Configuration Space, shown in the Table 2 below.
- ___________________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|___________________|___________________|
- | Primary | BAR at offset 0x10| BAR at offset 0x14|
- |___________|___________________|___________________|
- | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
- |___________|___________________|___________________|
-
- Table 2. BARs for Register Mapping
-
- @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
- @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
-
- @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configuration data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetIdeRegisterIoAddr (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN OUT EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- EFI_STATUS Status;
- PCI_TYPE00 PciData;
- UINT16 CommandBlockBaseAddr;
- UINT16 ControlBlockBaseAddr;
- UINT16 BusMasterBaseAddr;
-
- if ((PciIo == NULL) || (IdeRegisters == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- Status = PciIo->Pci.Read (
- PciIo,
- EfiPciIoWidthUint8,
- 0,
- sizeof (PciData),
- &PciData
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- BusMasterBaseAddr = (UINT16)((PciData.Device.Bar[4] & 0x0000fff0));
-
- if ((PciData.Hdr.ClassCode[0] & IDE_PRIMARY_OPERATING_MODE) == 0) {
- CommandBlockBaseAddr = 0x1f0;
- ControlBlockBaseAddr = 0x3f6;
- } else {
- //
- // The BARs should be of IO type
- //
- if (((PciData.Device.Bar[0] & BIT0) == 0) ||
- ((PciData.Device.Bar[1] & BIT0) == 0))
- {
- return EFI_UNSUPPORTED;
- }
-
- CommandBlockBaseAddr = (UINT16)(PciData.Device.Bar[0] & 0x0000fff8);
- ControlBlockBaseAddr = (UINT16)((PciData.Device.Bar[1] & 0x0000fffc) + 2);
- }
-
- //
- // Calculate IDE primary channel I/O register base address.
- //
- IdeRegisters[EfiIdePrimary].Data = CommandBlockBaseAddr;
- IdeRegisters[EfiIdePrimary].ErrOrFeature = (UINT16)(CommandBlockBaseAddr + 0x01);
- IdeRegisters[EfiIdePrimary].SectorCount = (UINT16)(CommandBlockBaseAddr + 0x02);
- IdeRegisters[EfiIdePrimary].SectorNumber = (UINT16)(CommandBlockBaseAddr + 0x03);
- IdeRegisters[EfiIdePrimary].CylinderLsb = (UINT16)(CommandBlockBaseAddr + 0x04);
- IdeRegisters[EfiIdePrimary].CylinderMsb = (UINT16)(CommandBlockBaseAddr + 0x05);
- IdeRegisters[EfiIdePrimary].Head = (UINT16)(CommandBlockBaseAddr + 0x06);
- IdeRegisters[EfiIdePrimary].CmdOrStatus = (UINT16)(CommandBlockBaseAddr + 0x07);
- IdeRegisters[EfiIdePrimary].AltOrDev = ControlBlockBaseAddr;
- IdeRegisters[EfiIdePrimary].BusMasterBaseAddr = BusMasterBaseAddr;
-
- if ((PciData.Hdr.ClassCode[0] & IDE_SECONDARY_OPERATING_MODE) == 0) {
- CommandBlockBaseAddr = 0x170;
- ControlBlockBaseAddr = 0x376;
- } else {
- //
- // The BARs should be of IO type
- //
- if (((PciData.Device.Bar[2] & BIT0) == 0) ||
- ((PciData.Device.Bar[3] & BIT0) == 0))
- {
- return EFI_UNSUPPORTED;
- }
-
- CommandBlockBaseAddr = (UINT16)(PciData.Device.Bar[2] & 0x0000fff8);
- ControlBlockBaseAddr = (UINT16)((PciData.Device.Bar[3] & 0x0000fffc) + 2);
- }
-
- //
- // Calculate IDE secondary channel I/O register base address.
- //
- IdeRegisters[EfiIdeSecondary].Data = CommandBlockBaseAddr;
- IdeRegisters[EfiIdeSecondary].ErrOrFeature = (UINT16)(CommandBlockBaseAddr + 0x01);
- IdeRegisters[EfiIdeSecondary].SectorCount = (UINT16)(CommandBlockBaseAddr + 0x02);
- IdeRegisters[EfiIdeSecondary].SectorNumber = (UINT16)(CommandBlockBaseAddr + 0x03);
- IdeRegisters[EfiIdeSecondary].CylinderLsb = (UINT16)(CommandBlockBaseAddr + 0x04);
- IdeRegisters[EfiIdeSecondary].CylinderMsb = (UINT16)(CommandBlockBaseAddr + 0x05);
- IdeRegisters[EfiIdeSecondary].Head = (UINT16)(CommandBlockBaseAddr + 0x06);
- IdeRegisters[EfiIdeSecondary].CmdOrStatus = (UINT16)(CommandBlockBaseAddr + 0x07);
- IdeRegisters[EfiIdeSecondary].AltOrDev = ControlBlockBaseAddr;
- IdeRegisters[EfiIdeSecondary].BusMasterBaseAddr = (UINT16)(BusMasterBaseAddr + 0x8);
-
- return EFI_SUCCESS;
-}
-
-/**
- Send ATA Ext command into device with NON_DATA protocol.
-
- @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
- @param Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_SUCCESS Reading succeed
- @retval EFI_DEVICE_ERROR Error executing commands on this device.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaIssueCommand (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- UINT8 DeviceHead;
- UINT8 AtaCommand;
-
- ASSERT (PciIo != NULL);
- ASSERT (IdeRegisters != NULL);
- ASSERT (AtaCommandBlock != NULL);
-
- DeviceHead = AtaCommandBlock->AtaDeviceHead;
- AtaCommand = AtaCommandBlock->AtaCommand;
-
- Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)
- //
- IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead));
-
- //
- // set all the command parameters
- // Before write to all the following registers, BSY and DRQ must be 0.
- //
- Status = DRQClear2 (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Fill the feature register, which is a two-byte FIFO. Need write twice.
- //
- IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeaturesExp);
- IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeatures);
-
- //
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.
- //
- IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCountExp);
- IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCount);
-
- //
- // Fill the start LBA registers, which are also two-byte FIFO
- //
- IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumberExp);
- IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumber);
-
- IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLowExp);
- IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLow);
-
- IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHighExp);
- IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHigh);
-
- //
- // Send command via Command Register
- //
- IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, AtaCommand);
-
- //
- // Stall at least 400 microseconds.
- //
- MicroSecondDelay (400);
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is used to send out ATA commands conforms to the PIO Data In Protocol.
-
- @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
- structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in, out] Buffer A pointer to the source buffer for the data.
- @param[in] ByteCount The length of the data.
- @param[in] Read Flag used to determine the data transfer direction.
- Read equals 1, means data transferred from device
- to host;Read equals 0, means data transferred
- from host to device.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS send out the ATA command and device send required data successfully.
- @retval EFI_DEVICE_ERROR command sent failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPioDataInOut (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT VOID *Buffer,
- IN UINT64 ByteCount,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- UINTN WordCount;
- UINTN Increment;
- UINT16 *Buffer16;
- EFI_STATUS Status;
-
- if ((PciIo == NULL) || (IdeRegisters == NULL) || (Buffer == NULL) || (AtaCommandBlock == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Issue ATA command
- //
- Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Buffer16 = (UINT16 *)Buffer;
-
- //
- // According to PIO data in protocol, host can perform a series of reads to
- // the data register after each time device set DRQ ready;
- // The data size of "a series of read" is command specific.
- // For most ATA command, data size received from device will not exceed
- // 1 sector, hence the data size for "a series of read" can be the whole data
- // size of one command request.
- // For ATA command such as Read Sector command, the data size of one ATA
- // command request is often larger than 1 sector, according to the
- // Read Sector command, the data size of "a series of read" is exactly 1
- // sector.
- // Here for simplification reason, we specify the data size for
- // "a series of read" to 1 sector (256 words) if data size of one ATA command
- // request is larger than 256 words.
- //
- Increment = 256;
-
- //
- // used to record bytes of currently transferred data
- //
- WordCount = 0;
-
- while (WordCount < RShiftU64 (ByteCount, 1)) {
- //
- // Poll DRQ bit set, data transfer can be performed only when DRQ is ready
- //
- Status = DRQReady2 (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- //
- // Get the byte count for one series of read
- //
- if ((WordCount + Increment) > RShiftU64 (ByteCount, 1)) {
- Increment = (UINTN)(RShiftU64 (ByteCount, 1) - WordCount);
- }
-
- if (Read) {
- IdeReadPortWMultiple (
- PciIo,
- IdeRegisters->Data,
- Increment,
- Buffer16
- );
- } else {
- IdeWritePortWMultiple (
- PciIo,
- IdeRegisters->Data,
- Increment,
- Buffer16
- );
- }
-
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- WordCount += Increment;
- Buffer16 += Increment;
- }
-
- Status = DRQClear (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
-Exit:
- //
- // Dump All Ide registers to ATA_STATUS_BLOCK
- //
- DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
-
- //
- // Not support the Non-blocking now,just do the blocking process.
- //
- return Status;
-}
-
-/**
- Send ATA command into device with NON_DATA protocol
-
- @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE
- data structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data
- structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS Reading succeed
- @retval EFI_ABORTED Command failed
- @retval EFI_DEVICE_ERROR Device status error.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaNonDataCommandIn (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- EFI_STATUS Status;
-
- if ((PciIo == NULL) || (IdeRegisters == NULL) || (AtaCommandBlock == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Issue ATA command
- //
- Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- //
- // Wait for command completion
- //
- Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
-Exit:
- //
- // Dump All Ide registers to ATA_STATUS_BLOCK
- //
- DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
-
- //
- // Not support the Non-blocking now,just do the blocking process.
- //
- return Status;
-}
-
-/**
- Wait for memory to be set.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
-
- @retval EFI_DEVICE_ERROR The memory is not set.
- @retval EFI_TIMEOUT The memory setting is time out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-AtaUdmStatusWait (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT8 RegisterValue;
- EFI_STATUS Status;
- UINT16 IoPortForBmis;
- UINT64 Delay;
- BOOLEAN InfiniteWait;
-
- if (Timeout == 0) {
- InfiniteWait = TRUE;
- } else {
- InfiniteWait = FALSE;
- }
-
- Delay = DivU64x32 (Timeout, 1000) + 1;
-
- do {
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
- if (((RegisterValue & BMIS_ERROR) != 0) || (Timeout == 0)) {
- DEBUG ((DEBUG_ERROR, "ATA UDMA operation fails\n"));
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- if ((RegisterValue & BMIS_INTERRUPT) != 0) {
- Status = EFI_SUCCESS;
- break;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
- Delay--;
- } while (InfiniteWait || (Delay > 0));
-
- return Status;
-}
-
-/**
- Check if the memory to be set.
-
- @param[in] PciIo The PCI IO protocol instance.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
-
- @retval EFI_DEVICE_ERROR The memory setting met a issue.
- @retval EFI_NOT_READY The memory is not set.
- @retval EFI_TIMEOUT The memory setting is time out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-AtaUdmStatusCheck (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN ATA_NONBLOCK_TASK *Task,
- IN EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- UINT8 RegisterValue;
- UINT16 IoPortForBmis;
- EFI_STATUS Status;
-
- Task->RetryTimes--;
-
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
-
- if ((RegisterValue & BMIS_ERROR) != 0) {
- DEBUG ((DEBUG_ERROR, "ATA UDMA operation fails\n"));
- return EFI_DEVICE_ERROR;
- }
-
- if ((RegisterValue & BMIS_INTERRUPT) != 0) {
- return EFI_SUCCESS;
- }
-
- if (!Task->InfiniteWait && (Task->RetryTimes == 0)) {
- return EFI_TIMEOUT;
- } else {
- //
- // The memory is not set.
- //
- return EFI_NOT_READY;
- }
-}
-
-/**
- Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).
-
- @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data
- structure.
- @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param[in] Read Flag used to determine the data transfer
- direction. Read equals 1, means data transferred
- from device to host;Read equals 0, means data
- transferred from host to device.
- @param[in] DataBuffer A pointer to the source buffer for the data.
- @param[in] DataLength The length of the data.
- @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure.
- @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
- @param[in] Timeout The time to complete the command, uses 100ns as a unit.
- @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK
- used by non-blocking mode.
-
- @retval EFI_SUCCESS the operation is successful.
- @retval EFI_OUT_OF_RESOURCES Build PRD table failed
- @retval EFI_UNSUPPORTED Unknown channel or operations command
- @retval EFI_DEVICE_ERROR Ata command execute failed
-
-**/
-EFI_STATUS
-EFIAPI
-AtaUdmaInOut (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN BOOLEAN Read,
- IN VOID *DataBuffer,
- IN UINT64 DataLength,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout,
- IN ATA_NONBLOCK_TASK *Task
- )
-{
- EFI_STATUS Status;
- UINT16 IoPortForBmic;
- UINT16 IoPortForBmis;
- UINT16 IoPortForBmid;
-
- UINTN PrdTableSize;
- EFI_PHYSICAL_ADDRESS PrdTableMapAddr;
- VOID *PrdTableMap;
- EFI_PHYSICAL_ADDRESS PrdTableBaseAddr;
- EFI_ATA_DMA_PRD *TempPrdBaseAddr;
- UINTN PrdTableNum;
-
- UINT8 RegisterValue;
- UINTN PageCount;
- UINTN ByteCount;
- UINTN ByteRemaining;
- UINT8 DeviceControl;
-
- VOID *BufferMap;
- EFI_PHYSICAL_ADDRESS BufferMapAddress;
- EFI_PCI_IO_PROTOCOL_OPERATION PciIoOperation;
-
- UINT8 DeviceHead;
- EFI_PCI_IO_PROTOCOL *PciIo;
- EFI_TPL OldTpl;
-
- UINTN AlignmentMask;
- UINTN RealPageCount;
- EFI_PHYSICAL_ADDRESS BaseAddr;
- EFI_PHYSICAL_ADDRESS BaseMapAddr;
-
- Status = EFI_SUCCESS;
- PrdTableMap = NULL;
- BufferMap = NULL;
- PageCount = 0;
- RealPageCount = 0;
- BaseAddr = 0;
- PciIo = Instance->PciIo;
-
- if ((PciIo == NULL) || (IdeRegisters == NULL) || (DataBuffer == NULL) || (AtaCommandBlock == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Before starting the Blocking BlockIO operation, push to finish all non-blocking
- // BlockIO tasks.
- // Delay 1ms to simulate the blocking time out checking.
- //
- OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- while ((Task == NULL) && (!IsListEmpty (&Instance->NonBlockingTaskList))) {
- AsyncNonBlockingTransferRoutine (NULL, Instance);
- //
- // Stall for 1 milliseconds.
- //
- MicroSecondDelay (1000);
- }
-
- gBS->RestoreTPL (OldTpl);
-
- //
- // The data buffer should be even alignment
- //
- if (((UINTN)DataBuffer & 0x1) != 0) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Set relevant IO Port address.
- //
- IoPortForBmic = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIC_OFFSET);
- IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET);
- IoPortForBmid = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMID_OFFSET);
-
- //
- // For Blocking mode, start the command.
- // For non-blocking mode, when the command is not started, start it, otherwise
- // go to check the status.
- //
- if (((Task != NULL) && (!Task->IsStart)) || (Task == NULL)) {
- //
- // Calculate the number of PRD entry.
- // Every entry in PRD table can specify a 64K memory region.
- //
- PrdTableNum = (UINTN)(RShiftU64 (DataLength, 16) + 1);
-
- //
- // Make sure that the memory region of PRD table is not cross 64K boundary
- //
- PrdTableSize = PrdTableNum * sizeof (EFI_ATA_DMA_PRD);
- if (PrdTableSize > 0x10000) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Allocate buffer for PRD table initialization.
- // Note Ide Bus Master spec said the descriptor table must be aligned on a 4 byte
- // boundary and the table cannot cross a 64K boundary in memory.
- //
- PageCount = EFI_SIZE_TO_PAGES (PrdTableSize);
- RealPageCount = PageCount + EFI_SIZE_TO_PAGES (SIZE_64KB);
-
- //
- // Make sure that PageCount plus EFI_SIZE_TO_PAGES (SIZE_64KB) does not overflow.
- //
- ASSERT (RealPageCount > PageCount);
-
- Status = PciIo->AllocateBuffer (
- PciIo,
- AllocateAnyPages,
- EfiBootServicesData,
- RealPageCount,
- (VOID **)&BaseAddr,
- 0
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- ByteCount = EFI_PAGES_TO_SIZE (RealPageCount);
- Status = PciIo->Map (
- PciIo,
- EfiPciIoOperationBusMasterCommonBuffer,
- (VOID *)(UINTN)BaseAddr,
- &ByteCount,
- &BaseMapAddr,
- &PrdTableMap
- );
- if (EFI_ERROR (Status) || (ByteCount != EFI_PAGES_TO_SIZE (RealPageCount))) {
- //
- // If the data length actually mapped is not equal to the requested amount,
- // it means the DMA operation may be broken into several discontinuous smaller chunks.
- // Can't handle this case.
- //
- PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr);
- return EFI_OUT_OF_RESOURCES;
- }
-
- ZeroMem ((VOID *)((UINTN)BaseAddr), ByteCount);
-
- //
- // Calculate the 64K align address as PRD Table base address.
- //
- AlignmentMask = SIZE_64KB - 1;
- PrdTableBaseAddr = ((UINTN)BaseAddr + AlignmentMask) & ~AlignmentMask;
- PrdTableMapAddr = ((UINTN)BaseMapAddr + AlignmentMask) & ~AlignmentMask;
-
- //
- // Map the host address of DataBuffer to DMA master address.
- //
- if (Read) {
- PciIoOperation = EfiPciIoOperationBusMasterWrite;
- } else {
- PciIoOperation = EfiPciIoOperationBusMasterRead;
- }
-
- ByteCount = (UINTN)DataLength;
- Status = PciIo->Map (
- PciIo,
- PciIoOperation,
- DataBuffer,
- &ByteCount,
- &BufferMapAddress,
- &BufferMap
- );
- if (EFI_ERROR (Status) || (ByteCount != DataLength)) {
- PciIo->Unmap (PciIo, PrdTableMap);
- PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr);
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // According to Ata spec, it requires the buffer address and size to be even.
- //
- ASSERT ((BufferMapAddress & 0x1) == 0);
- ASSERT ((ByteCount & 0x1) == 0);
-
- //
- // Fill the PRD table with appropriate bus master address of data buffer and data length.
- //
- ByteRemaining = ByteCount;
- TempPrdBaseAddr = (EFI_ATA_DMA_PRD *)(UINTN)PrdTableBaseAddr;
- while (ByteRemaining != 0) {
- if (ByteRemaining <= 0x10000) {
- TempPrdBaseAddr->RegionBaseAddr = (UINT32)((UINTN)BufferMapAddress);
- TempPrdBaseAddr->ByteCount = (UINT16)ByteRemaining;
- TempPrdBaseAddr->EndOfTable = 0x8000;
- break;
- }
-
- TempPrdBaseAddr->RegionBaseAddr = (UINT32)((UINTN)BufferMapAddress);
- TempPrdBaseAddr->ByteCount = (UINT16)0x0;
-
- ByteRemaining -= 0x10000;
- BufferMapAddress += 0x10000;
- TempPrdBaseAddr++;
- }
-
- //
- // Start to enable the DMA operation
- //
- DeviceHead = AtaCommandBlock->AtaDeviceHead;
-
- IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead));
-
- //
- // Enable interrupt to support UDMA
- //
- DeviceControl = 0;
- IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
-
- //
- // Read BMIS register and clear ERROR and INTR bit
- //
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
- RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);
- IdeWritePortB (PciIo, IoPortForBmis, RegisterValue);
-
- //
- // Set the base address to BMID register
- //
- IdeWritePortDW (PciIo, IoPortForBmid, (UINT32)PrdTableMapAddr);
-
- //
- // Set BMIC register to identify the operation direction
- //
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmic);
- if (Read) {
- RegisterValue |= BMIC_NREAD;
- } else {
- RegisterValue &= ~((UINT8)BMIC_NREAD);
- }
-
- IdeWritePortB (PciIo, IoPortForBmic, RegisterValue);
-
- if (Task != NULL) {
- Task->Map = BufferMap;
- Task->TableMap = PrdTableMap;
- Task->MapBaseAddress = (EFI_ATA_DMA_PRD *)(UINTN)BaseAddr;
- Task->PageCount = RealPageCount;
- Task->IsStart = TRUE;
- }
-
- //
- // Issue ATA command
- //
- Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout);
-
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- //
- // Set START bit of BMIC register
- //
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmic);
- RegisterValue |= BMIC_START;
- IdeWritePortB (PciIo, IoPortForBmic, RegisterValue);
- }
-
- //
- // Check the INTERRUPT and ERROR bit of BMIS
- //
- if (Task != NULL) {
- Status = AtaUdmStatusCheck (PciIo, Task, IdeRegisters);
- } else {
- Status = AtaUdmStatusWait (PciIo, IdeRegisters, Timeout);
- }
-
- //
- // For blocking mode, clear registers and free buffers.
- // For non blocking mode, when the related registers have been set or time
- // out, or a error has been happened, it needs to clear the register and free
- // buffer.
- //
- if ((Task == NULL) || (Status != EFI_NOT_READY)) {
- //
- // Read BMIS register and clear ERROR and INTR bit
- //
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmis);
- RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);
- IdeWritePortB (PciIo, IoPortForBmis, RegisterValue);
-
- //
- // Read Status Register of IDE device to clear interrupt
- //
- RegisterValue = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus);
-
- //
- // Clear START bit of BMIC register
- //
- RegisterValue = IdeReadPortB (PciIo, IoPortForBmic);
- RegisterValue &= ~((UINT8)BMIC_START);
- IdeWritePortB (PciIo, IoPortForBmic, RegisterValue);
-
- //
- // Disable interrupt of Select device
- //
- DeviceControl = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
- DeviceControl |= ATA_CTLREG_IEN_L;
- IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl);
- //
- // Stall for 10 milliseconds.
- //
- MicroSecondDelay (10000);
- }
-
-Exit:
- //
- // Free all allocated resource
- //
- if ((Task == NULL) || (Status != EFI_NOT_READY)) {
- if (Task != NULL) {
- PciIo->Unmap (PciIo, Task->TableMap);
- PciIo->FreeBuffer (PciIo, Task->PageCount, Task->MapBaseAddress);
- PciIo->Unmap (PciIo, Task->Map);
- } else {
- PciIo->Unmap (PciIo, PrdTableMap);
- PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr);
- PciIo->Unmap (PciIo, BufferMap);
- }
-
- //
- // Dump All Ide registers to ATA_STATUS_BLOCK
- //
- DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock);
- }
-
- return Status;
-}
-
-/**
- This function reads the pending data in the device.
-
- @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
-
- @retval EFI_SUCCESS Successfully read.
- @retval EFI_NOT_READY The BSY is set avoiding reading.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPacketReadPendingData (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- UINT8 AltRegister;
- UINT16 TempWordBuffer;
-
- AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
- if ((AltRegister & ATA_STSREG_BSY) == ATA_STSREG_BSY) {
- return EFI_NOT_READY;
- }
-
- if ((AltRegister & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) {
- TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
- while ((TempWordBuffer & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) {
- IdeReadPortWMultiple (
- PciIo,
- IdeRegisters->Data,
- 1,
- &TempWordBuffer
- );
- TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev);
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is called by AtaPacketCommandExecute().
- It is used to transfer data between host and device. The data direction is specified
- by the fourth parameter.
-
- @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure.
- @param Buffer Buffer contained data transferred between host and device.
- @param ByteCount Data size in byte unit of the buffer.
- @param Read Flag used to determine the data transfer direction.
- Read equals 1, means data transferred from device to host;
- Read equals 0, means data transferred from host to device.
- @param Timeout Timeout value for wait DRQ ready before each data stream's transfer
- , uses 100ns as a unit.
-
- @retval EFI_SUCCESS data is transferred successfully.
- @retval EFI_DEVICE_ERROR the device failed to transfer data.
-**/
-EFI_STATUS
-EFIAPI
-AtaPacketReadWrite (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT VOID *Buffer,
- IN OUT UINT32 *ByteCount,
- IN BOOLEAN Read,
- IN UINT64 Timeout
- )
-{
- UINT32 RequiredWordCount;
- UINT32 ActualWordCount;
- UINT32 WordCount;
- EFI_STATUS Status;
- UINT16 *PtrBuffer;
-
- PtrBuffer = Buffer;
- RequiredWordCount = *ByteCount >> 1;
-
- //
- // No data transfer is permitted.
- //
- if (RequiredWordCount == 0) {
- return EFI_SUCCESS;
- }
-
- //
- // ActualWordCount means the word count of data really transferred.
- //
- ActualWordCount = 0;
-
- while (ActualWordCount < RequiredWordCount) {
- //
- // before each data transfer stream, the host should poll DRQ bit ready,
- // to see whether indicates device is ready to transfer data.
- //
- Status = DRQReady2 (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- if (Status == EFI_NOT_READY) {
- //
- // Device provided less data than we intended to read, or wanted less
- // data than we intended to write, but it may still be successful.
- //
- break;
- } else {
- return Status;
- }
- }
-
- //
- // get current data transfer size from Cylinder Registers.
- //
- WordCount = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb) << 8;
- WordCount = WordCount | IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
- WordCount = WordCount & 0xffff;
- WordCount /= 2;
-
- WordCount = MIN (WordCount, (RequiredWordCount - ActualWordCount));
-
- if (Read) {
- IdeReadPortWMultiple (
- PciIo,
- IdeRegisters->Data,
- WordCount,
- PtrBuffer
- );
- } else {
- IdeWritePortWMultiple (
- PciIo,
- IdeRegisters->Data,
- WordCount,
- PtrBuffer
- );
- }
-
- //
- // read status register to check whether error happens.
- //
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- PtrBuffer += WordCount;
- ActualWordCount += WordCount;
- }
-
- if (Read) {
- //
- // In the case where the drive wants to send more data than we need to read,
- // the DRQ bit will be set and cause delays from DRQClear2().
- // We need to read data from the drive until it clears DRQ so we can move on.
- //
- AtaPacketReadPendingData (PciIo, IdeRegisters);
- }
-
- //
- // read status register to check whether error happens.
- //
- Status = CheckStatusRegister (PciIo, IdeRegisters);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // After data transfer is completed, normally, DRQ bit should clear.
- //
- Status = DRQClear (PciIo, IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- *ByteCount = ActualWordCount << 1;
- return Status;
-}
-
-/**
- This function is used to send out ATAPI commands conforms to the Packet Command
- with PIO Data In Protocol.
-
- @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
- @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
- @param[in] Channel The channel number of device.
- @param[in] Device The device number of device.
- @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure.
-
- @retval EFI_SUCCESS send out the ATAPI packet command successfully
- and device sends data successfully.
- @retval EFI_DEVICE_ERROR the device failed to send data.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPacketCommandExecute (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
- )
-{
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- EFI_STATUS Status;
- UINT8 Count;
- UINT8 PacketCommand[12];
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- //
- // Fill ATAPI Command Packet according to CDB.
- // For Atapi cmd, its length should be less than or equal to 12 bytes.
- //
- if (Packet->CdbLength > 12) {
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (PacketCommand, 12);
- CopyMem (PacketCommand, Packet->Cdb, Packet->CdbLength);
-
- //
- // No OVL; No DMA
- //
- AtaCommandBlock.AtaFeatures = 0x00;
- //
- // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device
- // determine how many data should be transferred.
- //
- AtaCommandBlock.AtaCylinderLow = (UINT8)(ATAPI_MAX_BYTE_COUNT & 0x00ff);
- AtaCommandBlock.AtaCylinderHigh = (UINT8)(ATAPI_MAX_BYTE_COUNT >> 8);
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
- AtaCommandBlock.AtaCommand = ATA_CMD_PACKET;
-
- IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | (Device << 0x4)));
- //
- // Disable interrupt
- //
- IdeWritePortB (PciIo, IdeRegisters->AltOrDev, ATA_DEFAULT_CTL);
-
- //
- // Issue ATA PACKET command firstly
- //
- Status = AtaIssueCommand (PciIo, IdeRegisters, &AtaCommandBlock, Packet->Timeout);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Status = DRQReady (PciIo, IdeRegisters, Packet->Timeout);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Send out ATAPI command packet
- //
- for (Count = 0; Count < 6; Count++) {
- IdeWritePortW (PciIo, IdeRegisters->Data, *((UINT16 *)PacketCommand + Count));
- //
- // Stall for 10 microseconds.
- //
- MicroSecondDelay (10);
- }
-
- //
- // Read/Write the data of ATAPI Command
- //
- if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
- Status = AtaPacketReadWrite (
- PciIo,
- IdeRegisters,
- Packet->InDataBuffer,
- &Packet->InTransferLength,
- TRUE,
- Packet->Timeout
- );
- } else {
- Status = AtaPacketReadWrite (
- PciIo,
- IdeRegisters,
- Packet->OutDataBuffer,
- &Packet->OutTransferLength,
- FALSE,
- Packet->Timeout
- );
- }
-
- return Status;
-}
-
-/**
- Set the calculated Best transfer mode to a detected device.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param TransferMode A pointer to EFI_ATA_TRANSFER_MODE data structure.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Set transfer mode successfully.
- @retval EFI_DEVICE_ERROR Set transfer mode failed.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetDeviceTransferMode (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_TRANSFER_MODE *TransferMode,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES;
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
- AtaCommandBlock.AtaFeatures = 0x03;
- AtaCommandBlock.AtaSectorCount = *((UINT8 *)TransferMode);
-
- //
- // Send SET FEATURE command (sub command 0x03) to set pio mode.
- //
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- return Status;
-}
-
-/**
- Set drive parameters for devices not support PACKETS command.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param DriveParameters A pointer to EFI_ATA_DRIVE_PARMS data structure.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Set drive parameter successfully.
- @retval EFI_DEVICE_ERROR Set drive parameter failed.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetDriveParameters (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_DRIVE_PARMS *DriveParameters,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_INIT_DRIVE_PARAM;
- AtaCommandBlock.AtaSectorCount = DriveParameters->Sector;
- AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) + DriveParameters->Heads);
-
- //
- // Send Init drive parameters
- //
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_WARN, "Init Drive Parameters Fail, Status = %r\n", Status));
- }
-
- //
- // Send Set Multiple parameters
- //
- AtaCommandBlock.AtaCommand = ATA_CMD_SET_MULTIPLE_MODE;
- AtaCommandBlock.AtaSectorCount = DriveParameters->MultipleSector;
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
-
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_WARN, "Set Multiple Mode Parameters Fail, Status = %r\n", Status));
- }
-
- return Status;
-}
-
-/**
- Send SMART Return Status command to check if the execution of SMART cmd is successful or not.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution.
- @retval Others Fail to get return status data.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeAtaSmartReturnStatusCheck (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- UINT8 LBAMid;
- UINT8 LBAHigh;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
- AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0);
-
- //
- // Send S.M.A.R.T Read Return Status command to device
- //
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (EFI_ERROR (Status)) {
- REPORT_STATUS_CODE (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)
- );
- return EFI_DEVICE_ERROR;
- }
-
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)
- );
-
- LBAMid = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderLsb);
- LBAHigh = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderMsb);
-
- if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {
- //
- // The threshold exceeded condition is not detected by the device
- //
- DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)
- );
- } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {
- //
- // The threshold exceeded condition is detected by the device
- //
- DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)
- );
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Enable SMART command of the disk if supported.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
-**/
-VOID
-EFIAPI
-IdeAtaSmartSupport (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_IDENTIFY_DATA *IdentifyData,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- //
- // Detect if the device supports S.M.A.R.T.
- //
- if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {
- //
- // S.M.A.R.T is not supported by the device
- //
- DEBUG ((
- DEBUG_INFO,
- "S.M.A.R.T feature is not supported at [%a] channel [%a] device!\n",
- (Channel == 1) ? "secondary" : "primary",
- (Device == 1) ? "slave" : "master"
- ));
- REPORT_STATUS_CODE (
- EFI_ERROR_CODE | EFI_ERROR_MINOR,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)
- );
- } else {
- //
- // Check if the feature is enabled. If not, then enable S.M.A.R.T.
- //
- if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {
- REPORT_STATUS_CODE (
- EFI_PROGRESS_CODE,
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)
- );
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
- AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0);
-
- //
- // Send S.M.A.R.T Enable command to device
- //
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- if (!EFI_ERROR (Status)) {
- //
- // Send S.M.A.R.T AutoSave command to device
- //
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_SMART;
- AtaCommandBlock.AtaFeatures = 0xD2;
- AtaCommandBlock.AtaSectorCount = 0xF1;
- AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F;
- AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2;
- AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0);
-
- Status = AtaNonDataCommandIn (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
- if (!EFI_ERROR (Status)) {
- Status = IdeAtaSmartReturnStatusCheck (
- Instance,
- Channel,
- Device,
- AtaStatusBlock
- );
- }
- }
- }
-
- DEBUG ((
- DEBUG_INFO,
- "Enabled S.M.A.R.T feature at [%a] channel [%a] device!\n",
- (Channel == 1) ? "secondary" : "primary",
- (Device == 1) ? "slave" : "master"
- ));
- }
-
- return;
-}
-
-/**
- Sends out an ATA Identify Command to the specified device.
-
- This function is called by DiscoverIdeDevice() during its device
- identification. It sends out the ATA Identify Command to the
- specified device. Only ATA device responses to this command. If
- the command succeeds, it returns the Identify data structure which
- contains information about the device. This function extracts the
- information it needs to fill the IDE_BLK_IO_DEV data structure,
- including device type, media block size, media capacity, and etc.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param Buffer A pointer to data buffer which is used to contain IDENTIFY data.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Identify ATA device successfully.
- @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaIdentify (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN OUT EFI_IDENTIFY_DATA *Buffer,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
-
- Status = AtaPioDataInOut (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- Buffer,
- sizeof (EFI_IDENTIFY_DATA),
- TRUE,
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- return Status;
-}
-
-/**
- This function is called by DiscoverIdeDevice() during its device
- identification.
- Its main purpose is to get enough information for the device media
- to fill in the Media data structure of the Block I/O Protocol interface.
-
- There are 5 steps to reach such objective:
- 1. Sends out the ATAPI Identify Command to the specified device.
- Only ATAPI device responses to this command. If the command succeeds,
- it returns the Identify data structure which filled with information
- about the device. Since the ATAPI device contains removable media,
- the only meaningful information is the device module name.
- 2. Sends out ATAPI Inquiry Packet Command to the specified device.
- This command will return inquiry data of the device, which contains
- the device type information.
- 3. Allocate sense data space for future use. We don't detect the media
- presence here to improvement boot performance, especially when CD
- media is present. The media detection will be performed just before
- each BLK_IO read/write
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param Buffer A pointer to data buffer which is used to contain IDENTIFY data.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure.
-
- @retval EFI_SUCCESS Identify ATAPI device successfully.
- @retval EFI_DEVICE_ERROR ATA Identify Packet Device Command failed or device type
- is not supported by this IDE driver.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaIdentifyPacket (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN OUT EFI_IDENTIFY_DATA *Buffer,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE;
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
-
- //
- // Send ATAPI Identify Command to get IDENTIFY data.
- //
- Status = AtaPioDataInOut (
- Instance->PciIo,
- &Instance->IdeRegisters[Channel],
- (VOID *)Buffer,
- sizeof (EFI_IDENTIFY_DATA),
- TRUE,
- &AtaCommandBlock,
- AtaStatusBlock,
- ATA_ATAPI_TIMEOUT,
- NULL
- );
-
- return Status;
-}
-
-/**
- This function is used for detect whether the IDE device exists in the
- specified Channel as the specified Device Number.
-
- There is two IDE channels: one is Primary Channel, the other is
- Secondary Channel.(Channel is the logical name for the physical "Cable".)
- Different channel has different register group.
-
- On each IDE channel, at most two IDE devices attach,
- one is called Device 0 (Master device), the other is called Device 1
- (Slave device). The devices on the same channel co-use the same register
- group, so before sending out a command for a specified device via command
- register, it is a must to select the current device to accept the command
- by set the device number in the Head/Device Register.
-
- @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure.
- @param IdeChannel The channel number of device.
-
- @retval EFI_SUCCESS successfully detects device.
- @retval other any failure during detection process will return this value.
-
-**/
-EFI_STATUS
-EFIAPI
-DetectAndConfigIdeDevice (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance,
- IN UINT8 IdeChannel
- )
-{
- EFI_STATUS Status;
- UINT8 SectorCountReg;
- UINT8 LBALowReg;
- UINT8 LBAMidReg;
- UINT8 LBAHighReg;
- EFI_ATA_DEVICE_TYPE DeviceType;
- UINT8 IdeDevice;
- EFI_IDE_REGISTERS *IdeRegisters;
- EFI_IDENTIFY_DATA Buffer;
-
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- EFI_ATA_COLLECTIVE_MODE *SupportedModes;
- EFI_ATA_TRANSFER_MODE TransferMode;
- EFI_ATA_DRIVE_PARMS DriveParameters;
-
- IdeRegisters = &Instance->IdeRegisters[IdeChannel];
- IdeInit = Instance->IdeControllerInit;
- PciIo = Instance->PciIo;
-
- for (IdeDevice = 0; IdeDevice < EfiIdeMaxDevice; IdeDevice++) {
- //
- // Select Master or Slave device to get the return signature for ATA DEVICE DIAGNOSTIC cmd.
- //
- IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)((IdeDevice << 4) | 0xe0));
-
- //
- // Send ATA Device Execut Diagnostic command.
- // This command should work no matter DRDY is ready or not
- //
- IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, ATA_CMD_EXEC_DRIVE_DIAG);
-
- Status = WaitForBSYClear (PciIo, IdeRegisters, 350000000);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "New detecting method: Send Execute Diagnostic Command: WaitForBSYClear: Status: %d\n", Status));
- continue;
- }
-
- //
- // Select Master or Slave device to get the return signature for ATA DEVICE DIAGNOSTIC cmd.
- //
- IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)((IdeDevice << 4) | 0xe0));
- //
- // Stall for 1 milliseconds.
- //
- MicroSecondDelay (1000);
-
- SectorCountReg = IdeReadPortB (PciIo, IdeRegisters->SectorCount);
- LBALowReg = IdeReadPortB (PciIo, IdeRegisters->SectorNumber);
- LBAMidReg = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb);
- LBAHighReg = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb);
-
- //
- // Refer to ATA/ATAPI 4 Spec, section 9.1
- //
- if ((SectorCountReg == 0x1) && (LBALowReg == 0x1) && (LBAMidReg == 0x0) && (LBAHighReg == 0x0)) {
- DeviceType = EfiIdeHarddisk;
- } else if ((LBAMidReg == 0x14) && (LBAHighReg == 0xeb)) {
- DeviceType = EfiIdeCdrom;
- } else {
- continue;
- }
-
- //
- // Send IDENTIFY cmd to the device to test if it is really attached.
- //
- if (DeviceType == EfiIdeHarddisk) {
- Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
- //
- // if identifying ata device is failure, then try to send identify packet cmd.
- //
- if (EFI_ERROR (Status)) {
- REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED));
-
- DeviceType = EfiIdeCdrom;
- Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
- }
- } else {
- Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
- //
- // if identifying atapi device is failure, then try to send identify cmd.
- //
- if (EFI_ERROR (Status)) {
- DeviceType = EfiIdeHarddisk;
- Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL);
- }
- }
-
- if (EFI_ERROR (Status)) {
- //
- // No device is found at this port
- //
- continue;
- }
-
- DEBUG ((
- DEBUG_INFO,
- "[%a] channel [%a] [%a] device\n",
- (IdeChannel == 1) ? "secondary" : "primary ",
- (IdeDevice == 1) ? "slave " : "master",
- DeviceType == EfiIdeCdrom ? "cdrom " : "harddisk"
- ));
- //
- // If the device is a hard disk, then try to enable S.M.A.R.T feature
- //
- if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) {
- IdeAtaSmartSupport (
- Instance,
- IdeChannel,
- IdeDevice,
- &Buffer,
- NULL
- );
- }
-
- //
- // Submit identify data to IDE controller init driver
- //
- IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &Buffer);
-
- //
- // Now start to config ide device parameter and transfer mode.
- //
- Status = IdeInit->CalculateMode (
- IdeInit,
- IdeChannel,
- IdeDevice,
- &SupportedModes
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Calculate Mode Fail, Status = %r\n", Status));
- continue;
- }
-
- //
- // Set best supported PIO mode on this IDE device
- //
- if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) {
- TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO;
- } else {
- TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO;
- }
-
- TransferMode.ModeNumber = (UINT8)(SupportedModes->PioMode.Mode);
-
- if (SupportedModes->ExtModeCount == 0) {
- Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
- continue;
- }
- }
-
- //
- // Set supported DMA mode on this IDE device. Note that UDMA & MDMA can't
- // be set together. Only one DMA mode can be set to a device. If setting
- // DMA mode operation fails, we can continue moving on because we only use
- // PIO mode at boot time. DMA modes are used by certain kind of OS booting
- //
- if (SupportedModes->UdmaMode.Valid) {
- TransferMode.ModeCategory = EFI_ATA_MODE_UDMA;
- TransferMode.ModeNumber = (UINT8)(SupportedModes->UdmaMode.Mode);
- Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
- continue;
- }
- } else if (SupportedModes->MultiWordDmaMode.Valid) {
- TransferMode.ModeCategory = EFI_ATA_MODE_MDMA;
- TransferMode.ModeNumber = (UINT8)SupportedModes->MultiWordDmaMode.Mode;
- Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL);
-
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status));
- continue;
- }
- }
-
- //
- // Set Parameters for the device:
- // 1) Init
- // 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command
- //
- if (DeviceType == EfiIdeHarddisk) {
- //
- // Init drive parameters
- //
- DriveParameters.Sector = (UINT8)((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->sectors_per_track;
- DriveParameters.Heads = (UINT8)(((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->heads - 1);
- DriveParameters.MultipleSector = (UINT8)((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->multi_sector_cmd_max_sct_cnt;
-
- SetDriveParameters (Instance, IdeChannel, IdeDevice, &DriveParameters, NULL);
- }
-
- //
- // Set IDE controller Timing Blocks in the PCI Configuration Space
- //
- IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes);
-
- //
- // IDE controller and IDE device timing is configured successfully.
- // Now insert the device into device list.
- //
- Status = CreateNewDeviceInfo (Instance, IdeChannel, IdeDevice, DeviceType, &Buffer);
- if (EFI_ERROR (Status)) {
- continue;
- }
-
- if (DeviceType == EfiIdeHarddisk) {
- REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE));
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Initialize ATA host controller at IDE mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeModeInitialization (
- IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance
- )
-{
- EFI_STATUS Status;
- EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT8 Channel;
- UINT8 IdeChannel;
- BOOLEAN ChannelEnabled;
- UINT8 MaxDevices;
-
- IdeInit = Instance->IdeControllerInit;
- PciIo = Instance->PciIo;
- Channel = IdeInit->ChannelCount;
-
- //
- // Obtain IDE IO port registers' base addresses
- //
- Status = GetIdeRegisterIoAddr (PciIo, Instance->IdeRegisters);
- if (EFI_ERROR (Status)) {
- goto ErrorExit;
- }
-
- for (IdeChannel = 0; IdeChannel < Channel; IdeChannel++) {
- IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel);
-
- //
- // now obtain channel information fron IdeControllerInit protocol.
- //
- Status = IdeInit->GetChannelInfo (
- IdeInit,
- IdeChannel,
- &ChannelEnabled,
- &MaxDevices
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "[GetChannel, Status=%x]", Status));
- continue;
- }
-
- if (!ChannelEnabled) {
- continue;
- }
-
- ASSERT (MaxDevices <= 2);
- //
- // Now inform the IDE Controller Init Module.
- //
- IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel);
-
- //
- // No reset channel function implemented.
- //
- IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel);
-
- //
- // Now inform the IDE Controller Init Module.
- //
- IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, IdeChannel);
-
- //
- // Detect all attached ATA devices and set the transfer mode for each device.
- //
- DetectAndConfigIdeDevice (Instance, IdeChannel);
- }
-
- //
- // All configurations done! Notify IdeController to do post initialization
- // work such as saving IDE controller PCI settings for S3 resume
- //
- IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0);
-
-ErrorExit:
- return Status;
-}
+/** @file + Header file for AHCI mode of ATA host controller. + + Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include "AtaAtapiPassThru.h" + +/** + read a one-byte data from a IDE port. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port The IDE Port number + + @return the one-byte data read from IDE port +**/ +UINT8 +EFIAPI +IdeReadPortB ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port + ) +{ + UINT8 Data; + + ASSERT (PciIo != NULL); + + Data = 0; + // + // perform 1-byte data read from register + // + PciIo->Io.Read ( + PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + 1, + &Data + ); + return Data; +} + +/** + write a 1-byte data to a specific IDE port. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port The IDE port to be written + @param Data The data to write to the port +**/ +VOID +EFIAPI +IdeWritePortB ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port, + IN UINT8 Data + ) +{ + ASSERT (PciIo != NULL); + + // + // perform 1-byte data write to register + // + PciIo->Io.Write ( + PciIo, + EfiPciIoWidthUint8, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + 1, + &Data + ); +} + +/** + write a 1-word data to a specific IDE port. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port The IDE port to be written + @param Data The data to write to the port +**/ +VOID +EFIAPI +IdeWritePortW ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port, + IN UINT16 Data + ) +{ + ASSERT (PciIo != NULL); + + // + // perform 1-word data write to register + // + PciIo->Io.Write ( + PciIo, + EfiPciIoWidthUint16, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + 1, + &Data + ); +} + +/** + write a 2-word data to a specific IDE port. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port The IDE port to be written + @param Data The data to write to the port +**/ +VOID +EFIAPI +IdeWritePortDW ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port, + IN UINT32 Data + ) +{ + ASSERT (PciIo != NULL); + + // + // perform 2-word data write to register + // + PciIo->Io.Write ( + PciIo, + EfiPciIoWidthUint32, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + 1, + &Data + ); +} + +/** + Write multiple words of data to the IDE data port. + Call the IO abstraction once to do the complete read, + not one word at a time + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port IO port to read + @param Count No. of UINT16's to read + @param Buffer Pointer to the data buffer for read + +**/ +VOID +EFIAPI +IdeWritePortWMultiple ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port, + IN UINTN Count, + IN VOID *Buffer + ) +{ + ASSERT (PciIo != NULL); + ASSERT (Buffer != NULL); + + // + // perform UINT16 data write to the FIFO + // + PciIo->Io.Write ( + PciIo, + EfiPciIoWidthFifoUint16, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + Count, + (UINT16 *)Buffer + ); +} + +/** + Reads multiple words of data from the IDE data port. + Call the IO abstraction once to do the complete read, + not one word at a time + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure + @param Port IO port to read + @param Count Number of UINT16's to read + @param Buffer Pointer to the data buffer for read + +**/ +VOID +EFIAPI +IdeReadPortWMultiple ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN UINT16 Port, + IN UINTN Count, + IN VOID *Buffer + ) +{ + ASSERT (PciIo != NULL); + ASSERT (Buffer != NULL); + + // + // Perform UINT16 data read from FIFO + // + PciIo->Io.Read ( + PciIo, + EfiPciIoWidthFifoUint16, + EFI_PCI_IO_PASS_THROUGH_BAR, + (UINT64)Port, + Count, + (UINT16 *)Buffer + ); +} + +/** + This function is used to analyze the Status Register and print out + some debug information and if there is ERR bit set in the Status + Register, the Error Register's value is also be parsed and print out. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + +**/ +VOID +EFIAPI +DumpAllIdeRegisters ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_ATA_STATUS_BLOCK StatusBlock; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + ZeroMem (&StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + + StatusBlock.AtaStatus = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + StatusBlock.AtaError = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature); + StatusBlock.AtaSectorCount = IdeReadPortB (PciIo, IdeRegisters->SectorCount); + StatusBlock.AtaSectorCountExp = IdeReadPortB (PciIo, IdeRegisters->SectorCount); + StatusBlock.AtaSectorNumber = IdeReadPortB (PciIo, IdeRegisters->SectorNumber); + StatusBlock.AtaSectorNumberExp = IdeReadPortB (PciIo, IdeRegisters->SectorNumber); + StatusBlock.AtaCylinderLow = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb); + StatusBlock.AtaCylinderLowExp = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb); + StatusBlock.AtaCylinderHigh = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb); + StatusBlock.AtaCylinderHighExp = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb); + StatusBlock.AtaDeviceHead = IdeReadPortB (PciIo, IdeRegisters->Head); + + if (AtaStatusBlock != NULL) { + // + // Dump the content of all ATA registers. + // + CopyMem (AtaStatusBlock, &StatusBlock, sizeof (EFI_ATA_STATUS_BLOCK)); + } + + DEBUG_CODE_BEGIN (); + if ((StatusBlock.AtaStatus & ATA_STSREG_DWF) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Write Fault\n", StatusBlock.AtaStatus)); + } + + if ((StatusBlock.AtaStatus & ATA_STSREG_CORR) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Corrected Data\n", StatusBlock.AtaStatus)); + } + + if ((StatusBlock.AtaStatus & ATA_STSREG_ERR) != 0) { + if ((StatusBlock.AtaError & ATA_ERRREG_BBK) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Bad Block Detected\n", StatusBlock.AtaError)); + } + + if ((StatusBlock.AtaError & ATA_ERRREG_UNC) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Uncorrectable Data\n", StatusBlock.AtaError)); + } + + if ((StatusBlock.AtaError & ATA_ERRREG_MC) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Media Change\n", StatusBlock.AtaError)); + } + + if ((StatusBlock.AtaError & ATA_ERRREG_ABRT) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Abort\n", StatusBlock.AtaError)); + } + + if ((StatusBlock.AtaError & ATA_ERRREG_TK0NF) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Track 0 Not Found\n", StatusBlock.AtaError)); + } + + if ((StatusBlock.AtaError & ATA_ERRREG_AMNF) != 0) { + DEBUG ((DEBUG_ERROR, "CheckRegisterStatus()-- %02x : Error : Address Mark Not Found\n", StatusBlock.AtaError)); + } + } + + DEBUG_CODE_END (); +} + +/** + This function is used to analyze the Status Register at the condition that BSY is zero. + if there is ERR bit set in the Status Register, then return error. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + + @retval EFI_SUCCESS No err information in the Status Register. + @retval EFI_DEVICE_ERROR Any err information in the Status Register. + +**/ +EFI_STATUS +EFIAPI +CheckStatusRegister ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters + ) +{ + UINT8 StatusRegister; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + + if ((StatusRegister & ATA_STSREG_BSY) == 0) { + if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) { + return EFI_SUCCESS; + } else { + return EFI_DEVICE_ERROR; + } + } + + return EFI_SUCCESS; +} + +/** + This function is used to poll for the DRQ bit clear in the Status + Register. DRQ is cleared when the device is finished transferring data. + So this function is called after data transfer is finished. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS DRQ bit clear within the time out. + + @retval EFI_TIMEOUT DRQ bit not clear within the time out. + + @note + Read Status Register will clear interrupt status. + +**/ +EFI_STATUS +EFIAPI +DRQClear ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT8 StatusRegister; + BOOLEAN InfiniteWait; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + do { + StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + + // + // Wait for BSY == 0, then judge if DRQ is clear + // + if ((StatusRegister & ATA_STSREG_BSY) == 0) { + if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) { + return EFI_DEVICE_ERROR; + } else { + return EFI_SUCCESS; + } + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + This function is used to poll for the DRQ bit clear in the Alternate + Status Register. DRQ is cleared when the device is finished + transferring data. So this function is called after data transfer + is finished. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS DRQ bit clear within the time out. + + @retval EFI_TIMEOUT DRQ bit not clear within the time out. + @note Read Alternate Status Register will not clear interrupt status. + +**/ +EFI_STATUS +EFIAPI +DRQClear2 ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT8 AltRegister; + BOOLEAN InfiniteWait; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + do { + AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + + // + // Wait for BSY == 0, then judge if DRQ is clear + // + if ((AltRegister & ATA_STSREG_BSY) == 0) { + if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) { + return EFI_DEVICE_ERROR; + } else { + return EFI_SUCCESS; + } + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + This function is used to poll for the DRQ bit set in the + Status Register. + DRQ is set when the device is ready to transfer data. So this function + is called after the command is sent to the device and before required + data is transferred. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS BSY bit cleared and DRQ bit set within the + timeout. + + @retval EFI_TIMEOUT BSY bit not cleared within the timeout. + + @retval EFI_ABORTED Polling abandoned due to command abort. + + @retval EFI_DEVICE_ERROR Polling abandoned due to a non-abort error. + + @retval EFI_NOT_READY BSY bit cleared within timeout, and device + reported "command complete" by clearing DRQ + bit. + + @note Read Status Register will clear interrupt status. + +**/ +EFI_STATUS +EFIAPI +DRQReady ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT8 StatusRegister; + UINT8 ErrorRegister; + BOOLEAN InfiniteWait; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + do { + // + // Read Status Register will clear interrupt + // + StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + + // + // Wait for BSY == 0, then judge if DRQ is clear or ERR is set + // + if ((StatusRegister & ATA_STSREG_BSY) == 0) { + if ((StatusRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) { + ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature); + + if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) { + return EFI_ABORTED; + } + + return EFI_DEVICE_ERROR; + } + + if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) { + return EFI_SUCCESS; + } else { + return EFI_NOT_READY; + } + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + This function is used to poll for the DRQ bit set in the Alternate Status Register. + DRQ is set when the device is ready to transfer data. So this function is called after + the command is sent to the device and before required data is transferred. + + @param PciIo A pointer to EFI_PCI_IO_PROTOCOL data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS BSY bit cleared and DRQ bit set within the + timeout. + + @retval EFI_TIMEOUT BSY bit not cleared within the timeout. + + @retval EFI_ABORTED Polling abandoned due to command abort. + + @retval EFI_DEVICE_ERROR Polling abandoned due to a non-abort error. + + @retval EFI_NOT_READY BSY bit cleared within timeout, and device + reported "command complete" by clearing DRQ + bit. + + @note Read Alternate Status Register will not clear interrupt status. + +**/ +EFI_STATUS +EFIAPI +DRQReady2 ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT8 AltRegister; + UINT8 ErrorRegister; + BOOLEAN InfiniteWait; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + + do { + // + // Read Alternate Status Register will not clear interrupt status + // + AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + // + // Wait for BSY == 0, then judge if DRQ is clear or ERR is set + // + if ((AltRegister & ATA_STSREG_BSY) == 0) { + if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) { + ErrorRegister = IdeReadPortB (PciIo, IdeRegisters->ErrOrFeature); + + if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) { + return EFI_ABORTED; + } + + return EFI_DEVICE_ERROR; + } + + if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) { + return EFI_SUCCESS; + } else { + return EFI_NOT_READY; + } + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + This function is used to poll for the BSY bit clear in the Status Register. BSY + is clear when the device is not busy. Every command must be sent after device is not busy. + + @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS BSY bit clear within the time out. + @retval EFI_TIMEOUT BSY bit not clear within the time out. + + @note Read Status Register will clear interrupt status. +**/ +EFI_STATUS +EFIAPI +WaitForBSYClear ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT64 Delay; + UINT8 StatusRegister; + BOOLEAN InfiniteWait; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + do { + StatusRegister = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + + if ((StatusRegister & ATA_STSREG_BSY) == 0x00) { + return EFI_SUCCESS; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return EFI_TIMEOUT; +} + +/** + Get IDE i/o port registers' base addresses by mode. + + In 'Compatibility' mode, use fixed addresses. + In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's + Configuration Space. + + The steps to get IDE i/o port registers' base addresses for each channel + as follows: + + 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE + controller's Configuration Space to determine the operating mode. + + 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below. + ___________________________________________ + | | Command Block | Control Block | + | Channel | Registers | Registers | + |___________|_______________|_______________| + | Primary | 1F0h - 1F7h | 3F6h - 3F7h | + |___________|_______________|_______________| + | Secondary | 170h - 177h | 376h - 377h | + |___________|_______________|_______________| + + Table 1. Compatibility resource mappings + + b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs + in IDE controller's PCI Configuration Space, shown in the Table 2 below. + ___________________________________________________ + | | Command Block | Control Block | + | Channel | Registers | Registers | + |___________|___________________|___________________| + | Primary | BAR at offset 0x10| BAR at offset 0x14| + |___________|___________________|___________________| + | Secondary | BAR at offset 0x18| BAR at offset 0x1C| + |___________|___________________|___________________| + + Table 2. BARs for Register Mapping + + @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance + @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to + store the IDE i/o port registers' base addresses + + @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type + @retval EFI_SUCCESS Get the Base address successfully + @retval Other Read the pci configuration data error + +**/ +EFI_STATUS +EFIAPI +GetIdeRegisterIoAddr ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN OUT EFI_IDE_REGISTERS *IdeRegisters + ) +{ + EFI_STATUS Status; + PCI_TYPE00 PciData; + UINT16 CommandBlockBaseAddr; + UINT16 ControlBlockBaseAddr; + UINT16 BusMasterBaseAddr; + + if ((PciIo == NULL) || (IdeRegisters == NULL)) { + return EFI_INVALID_PARAMETER; + } + + Status = PciIo->Pci.Read ( + PciIo, + EfiPciIoWidthUint8, + 0, + sizeof (PciData), + &PciData + ); + + if (EFI_ERROR (Status)) { + return Status; + } + + BusMasterBaseAddr = (UINT16)((PciData.Device.Bar[4] & 0x0000fff0)); + + if ((PciData.Hdr.ClassCode[0] & IDE_PRIMARY_OPERATING_MODE) == 0) { + CommandBlockBaseAddr = 0x1f0; + ControlBlockBaseAddr = 0x3f6; + } else { + // + // The BARs should be of IO type + // + if (((PciData.Device.Bar[0] & BIT0) == 0) || + ((PciData.Device.Bar[1] & BIT0) == 0)) + { + return EFI_UNSUPPORTED; + } + + CommandBlockBaseAddr = (UINT16)(PciData.Device.Bar[0] & 0x0000fff8); + ControlBlockBaseAddr = (UINT16)((PciData.Device.Bar[1] & 0x0000fffc) + 2); + } + + // + // Calculate IDE primary channel I/O register base address. + // + IdeRegisters[EfiIdePrimary].Data = CommandBlockBaseAddr; + IdeRegisters[EfiIdePrimary].ErrOrFeature = (UINT16)(CommandBlockBaseAddr + 0x01); + IdeRegisters[EfiIdePrimary].SectorCount = (UINT16)(CommandBlockBaseAddr + 0x02); + IdeRegisters[EfiIdePrimary].SectorNumber = (UINT16)(CommandBlockBaseAddr + 0x03); + IdeRegisters[EfiIdePrimary].CylinderLsb = (UINT16)(CommandBlockBaseAddr + 0x04); + IdeRegisters[EfiIdePrimary].CylinderMsb = (UINT16)(CommandBlockBaseAddr + 0x05); + IdeRegisters[EfiIdePrimary].Head = (UINT16)(CommandBlockBaseAddr + 0x06); + IdeRegisters[EfiIdePrimary].CmdOrStatus = (UINT16)(CommandBlockBaseAddr + 0x07); + IdeRegisters[EfiIdePrimary].AltOrDev = ControlBlockBaseAddr; + IdeRegisters[EfiIdePrimary].BusMasterBaseAddr = BusMasterBaseAddr; + + if ((PciData.Hdr.ClassCode[0] & IDE_SECONDARY_OPERATING_MODE) == 0) { + CommandBlockBaseAddr = 0x170; + ControlBlockBaseAddr = 0x376; + } else { + // + // The BARs should be of IO type + // + if (((PciData.Device.Bar[2] & BIT0) == 0) || + ((PciData.Device.Bar[3] & BIT0) == 0)) + { + return EFI_UNSUPPORTED; + } + + CommandBlockBaseAddr = (UINT16)(PciData.Device.Bar[2] & 0x0000fff8); + ControlBlockBaseAddr = (UINT16)((PciData.Device.Bar[3] & 0x0000fffc) + 2); + } + + // + // Calculate IDE secondary channel I/O register base address. + // + IdeRegisters[EfiIdeSecondary].Data = CommandBlockBaseAddr; + IdeRegisters[EfiIdeSecondary].ErrOrFeature = (UINT16)(CommandBlockBaseAddr + 0x01); + IdeRegisters[EfiIdeSecondary].SectorCount = (UINT16)(CommandBlockBaseAddr + 0x02); + IdeRegisters[EfiIdeSecondary].SectorNumber = (UINT16)(CommandBlockBaseAddr + 0x03); + IdeRegisters[EfiIdeSecondary].CylinderLsb = (UINT16)(CommandBlockBaseAddr + 0x04); + IdeRegisters[EfiIdeSecondary].CylinderMsb = (UINT16)(CommandBlockBaseAddr + 0x05); + IdeRegisters[EfiIdeSecondary].Head = (UINT16)(CommandBlockBaseAddr + 0x06); + IdeRegisters[EfiIdeSecondary].CmdOrStatus = (UINT16)(CommandBlockBaseAddr + 0x07); + IdeRegisters[EfiIdeSecondary].AltOrDev = ControlBlockBaseAddr; + IdeRegisters[EfiIdeSecondary].BusMasterBaseAddr = (UINT16)(BusMasterBaseAddr + 0x8); + + return EFI_SUCCESS; +} + +/** + Send ATA Ext command into device with NON_DATA protocol. + + @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. + @param Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_SUCCESS Reading succeed + @retval EFI_DEVICE_ERROR Error executing commands on this device. + +**/ +EFI_STATUS +EFIAPI +AtaIssueCommand ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN UINT64 Timeout + ) +{ + EFI_STATUS Status; + UINT8 DeviceHead; + UINT8 AtaCommand; + + ASSERT (PciIo != NULL); + ASSERT (IdeRegisters != NULL); + ASSERT (AtaCommandBlock != NULL); + + DeviceHead = AtaCommandBlock->AtaDeviceHead; + AtaCommand = AtaCommandBlock->AtaCommand; + + Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + // + // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility) + // + IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead)); + + // + // set all the command parameters + // Before write to all the following registers, BSY and DRQ must be 0. + // + Status = DRQClear2 (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + // + // Fill the feature register, which is a two-byte FIFO. Need write twice. + // + IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeaturesExp); + IdeWritePortB (PciIo, IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeatures); + + // + // Fill the sector count register, which is a two-byte FIFO. Need write twice. + // + IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCountExp); + IdeWritePortB (PciIo, IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCount); + + // + // Fill the start LBA registers, which are also two-byte FIFO + // + IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumberExp); + IdeWritePortB (PciIo, IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumber); + + IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLowExp); + IdeWritePortB (PciIo, IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLow); + + IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHighExp); + IdeWritePortB (PciIo, IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHigh); + + // + // Send command via Command Register + // + IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, AtaCommand); + + // + // Stall at least 400 microseconds. + // + MicroSecondDelay (400); + + return EFI_SUCCESS; +} + +/** + This function is used to send out ATA commands conforms to the PIO Data In Protocol. + + @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data + structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in, out] Buffer A pointer to the source buffer for the data. + @param[in] ByteCount The length of the data. + @param[in] Read Flag used to determine the data transfer direction. + Read equals 1, means data transferred from device + to host;Read equals 0, means data transferred + from host to device. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS send out the ATA command and device send required data successfully. + @retval EFI_DEVICE_ERROR command sent failed. + +**/ +EFI_STATUS +EFIAPI +AtaPioDataInOut ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN OUT VOID *Buffer, + IN UINT64 ByteCount, + IN BOOLEAN Read, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + UINTN WordCount; + UINTN Increment; + UINT16 *Buffer16; + EFI_STATUS Status; + + if ((PciIo == NULL) || (IdeRegisters == NULL) || (Buffer == NULL) || (AtaCommandBlock == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // Issue ATA command + // + Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + Buffer16 = (UINT16 *)Buffer; + + // + // According to PIO data in protocol, host can perform a series of reads to + // the data register after each time device set DRQ ready; + // The data size of "a series of read" is command specific. + // For most ATA command, data size received from device will not exceed + // 1 sector, hence the data size for "a series of read" can be the whole data + // size of one command request. + // For ATA command such as Read Sector command, the data size of one ATA + // command request is often larger than 1 sector, according to the + // Read Sector command, the data size of "a series of read" is exactly 1 + // sector. + // Here for simplification reason, we specify the data size for + // "a series of read" to 1 sector (256 words) if data size of one ATA command + // request is larger than 256 words. + // + Increment = 256; + + // + // used to record bytes of currently transferred data + // + WordCount = 0; + + while (WordCount < RShiftU64 (ByteCount, 1)) { + // + // Poll DRQ bit set, data transfer can be performed only when DRQ is ready + // + Status = DRQReady2 (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + // + // Get the byte count for one series of read + // + if ((WordCount + Increment) > RShiftU64 (ByteCount, 1)) { + Increment = (UINTN)(RShiftU64 (ByteCount, 1) - WordCount); + } + + if (Read) { + IdeReadPortWMultiple ( + PciIo, + IdeRegisters->Data, + Increment, + Buffer16 + ); + } else { + IdeWritePortWMultiple ( + PciIo, + IdeRegisters->Data, + Increment, + Buffer16 + ); + } + + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + WordCount += Increment; + Buffer16 += Increment; + } + + Status = DRQClear (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + +Exit: + // + // Dump All Ide registers to ATA_STATUS_BLOCK + // + DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock); + + // + // Not support the Non-blocking now,just do the blocking process. + // + return Status; +} + +/** + Send ATA command into device with NON_DATA protocol + + @param[in] PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE + data structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data + structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS Reading succeed + @retval EFI_ABORTED Command failed + @retval EFI_DEVICE_ERROR Device status error. + +**/ +EFI_STATUS +EFIAPI +AtaNonDataCommandIn ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + EFI_STATUS Status; + + if ((PciIo == NULL) || (IdeRegisters == NULL) || (AtaCommandBlock == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // Issue ATA command + // + Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + // + // Wait for command completion + // + Status = WaitForBSYClear (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + +Exit: + // + // Dump All Ide registers to ATA_STATUS_BLOCK + // + DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock); + + // + // Not support the Non-blocking now,just do the blocking process. + // + return Status; +} + +/** + Wait for memory to be set. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + + @retval EFI_DEVICE_ERROR The memory is not set. + @retval EFI_TIMEOUT The memory setting is time out. + @retval EFI_SUCCESS The memory is correct set. + +**/ +EFI_STATUS +AtaUdmStatusWait ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT64 Timeout + ) +{ + UINT8 RegisterValue; + EFI_STATUS Status; + UINT16 IoPortForBmis; + UINT64 Delay; + BOOLEAN InfiniteWait; + + if (Timeout == 0) { + InfiniteWait = TRUE; + } else { + InfiniteWait = FALSE; + } + + Delay = DivU64x32 (Timeout, 1000) + 1; + + do { + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + break; + } + + IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET); + RegisterValue = IdeReadPortB (PciIo, IoPortForBmis); + if (((RegisterValue & BMIS_ERROR) != 0) || (Timeout == 0)) { + DEBUG ((DEBUG_ERROR, "ATA UDMA operation fails\n")); + Status = EFI_DEVICE_ERROR; + break; + } + + if ((RegisterValue & BMIS_INTERRUPT) != 0) { + Status = EFI_SUCCESS; + break; + } + + // + // Stall for 100 microseconds. + // + MicroSecondDelay (100); + Delay--; + } while (InfiniteWait || (Delay > 0)); + + return Status; +} + +/** + Check if the memory to be set. + + @param[in] PciIo The PCI IO protocol instance. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + + @retval EFI_DEVICE_ERROR The memory setting met a issue. + @retval EFI_NOT_READY The memory is not set. + @retval EFI_TIMEOUT The memory setting is time out. + @retval EFI_SUCCESS The memory is correct set. + +**/ +EFI_STATUS +AtaUdmStatusCheck ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN ATA_NONBLOCK_TASK *Task, + IN EFI_IDE_REGISTERS *IdeRegisters + ) +{ + UINT8 RegisterValue; + UINT16 IoPortForBmis; + EFI_STATUS Status; + + Task->RetryTimes--; + + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET); + RegisterValue = IdeReadPortB (PciIo, IoPortForBmis); + + if ((RegisterValue & BMIS_ERROR) != 0) { + DEBUG ((DEBUG_ERROR, "ATA UDMA operation fails\n")); + return EFI_DEVICE_ERROR; + } + + if ((RegisterValue & BMIS_INTERRUPT) != 0) { + return EFI_SUCCESS; + } + + if (!Task->InfiniteWait && (Task->RetryTimes == 0)) { + return EFI_TIMEOUT; + } else { + // + // The memory is not set. + // + return EFI_NOT_READY; + } +} + +/** + Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt). + + @param[in] Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data + structure. + @param[in] IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param[in] Read Flag used to determine the data transfer + direction. Read equals 1, means data transferred + from device to host;Read equals 0, means data + transferred from host to device. + @param[in] DataBuffer A pointer to the source buffer for the data. + @param[in] DataLength The length of the data. + @param[in] AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK data structure. + @param[in, out] AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + @param[in] Timeout The time to complete the command, uses 100ns as a unit. + @param[in] Task Optional. Pointer to the ATA_NONBLOCK_TASK + used by non-blocking mode. + + @retval EFI_SUCCESS the operation is successful. + @retval EFI_OUT_OF_RESOURCES Build PRD table failed + @retval EFI_UNSUPPORTED Unknown channel or operations command + @retval EFI_DEVICE_ERROR Ata command execute failed + +**/ +EFI_STATUS +EFIAPI +AtaUdmaInOut ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN BOOLEAN Read, + IN VOID *DataBuffer, + IN UINT64 DataLength, + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock, + IN UINT64 Timeout, + IN ATA_NONBLOCK_TASK *Task + ) +{ + EFI_STATUS Status; + UINT16 IoPortForBmic; + UINT16 IoPortForBmis; + UINT16 IoPortForBmid; + + UINTN PrdTableSize; + EFI_PHYSICAL_ADDRESS PrdTableMapAddr; + VOID *PrdTableMap; + EFI_PHYSICAL_ADDRESS PrdTableBaseAddr; + EFI_ATA_DMA_PRD *TempPrdBaseAddr; + UINTN PrdTableNum; + + UINT8 RegisterValue; + UINTN PageCount; + UINTN ByteCount; + UINTN ByteRemaining; + UINT8 DeviceControl; + + VOID *BufferMap; + EFI_PHYSICAL_ADDRESS BufferMapAddress; + EFI_PCI_IO_PROTOCOL_OPERATION PciIoOperation; + + UINT8 DeviceHead; + EFI_PCI_IO_PROTOCOL *PciIo; + EFI_TPL OldTpl; + + UINTN AlignmentMask; + UINTN RealPageCount; + EFI_PHYSICAL_ADDRESS BaseAddr; + EFI_PHYSICAL_ADDRESS BaseMapAddr; + + Status = EFI_SUCCESS; + PrdTableMap = NULL; + BufferMap = NULL; + PageCount = 0; + RealPageCount = 0; + BaseAddr = 0; + PciIo = Instance->PciIo; + + if ((PciIo == NULL) || (IdeRegisters == NULL) || (DataBuffer == NULL) || (AtaCommandBlock == NULL)) { + return EFI_INVALID_PARAMETER; + } + + // + // Before starting the Blocking BlockIO operation, push to finish all non-blocking + // BlockIO tasks. + // Delay 1ms to simulate the blocking time out checking. + // + OldTpl = gBS->RaiseTPL (TPL_NOTIFY); + while ((Task == NULL) && (!IsListEmpty (&Instance->NonBlockingTaskList))) { + AsyncNonBlockingTransferRoutine (NULL, Instance); + // + // Stall for 1 milliseconds. + // + MicroSecondDelay (1000); + } + + gBS->RestoreTPL (OldTpl); + + // + // The data buffer should be even alignment + // + if (((UINTN)DataBuffer & 0x1) != 0) { + return EFI_INVALID_PARAMETER; + } + + // + // Set relevant IO Port address. + // + IoPortForBmic = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIC_OFFSET); + IoPortForBmis = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMIS_OFFSET); + IoPortForBmid = (UINT16)(IdeRegisters->BusMasterBaseAddr + BMID_OFFSET); + + // + // For Blocking mode, start the command. + // For non-blocking mode, when the command is not started, start it, otherwise + // go to check the status. + // + if (((Task != NULL) && (!Task->IsStart)) || (Task == NULL)) { + // + // Calculate the number of PRD entry. + // Every entry in PRD table can specify a 64K memory region. + // + PrdTableNum = (UINTN)(RShiftU64 (DataLength, 16) + 1); + + // + // Make sure that the memory region of PRD table is not cross 64K boundary + // + PrdTableSize = PrdTableNum * sizeof (EFI_ATA_DMA_PRD); + if (PrdTableSize > 0x10000) { + return EFI_INVALID_PARAMETER; + } + + // + // Allocate buffer for PRD table initialization. + // Note Ide Bus Master spec said the descriptor table must be aligned on a 4 byte + // boundary and the table cannot cross a 64K boundary in memory. + // + PageCount = EFI_SIZE_TO_PAGES (PrdTableSize); + RealPageCount = PageCount + EFI_SIZE_TO_PAGES (SIZE_64KB); + + // + // Make sure that PageCount plus EFI_SIZE_TO_PAGES (SIZE_64KB) does not overflow. + // + ASSERT (RealPageCount > PageCount); + + Status = PciIo->AllocateBuffer ( + PciIo, + AllocateAnyPages, + EfiBootServicesData, + RealPageCount, + (VOID **)&BaseAddr, + 0 + ); + if (EFI_ERROR (Status)) { + return EFI_OUT_OF_RESOURCES; + } + + ByteCount = EFI_PAGES_TO_SIZE (RealPageCount); + Status = PciIo->Map ( + PciIo, + EfiPciIoOperationBusMasterCommonBuffer, + (VOID *)(UINTN)BaseAddr, + &ByteCount, + &BaseMapAddr, + &PrdTableMap + ); + if (EFI_ERROR (Status) || (ByteCount != EFI_PAGES_TO_SIZE (RealPageCount))) { + // + // If the data length actually mapped is not equal to the requested amount, + // it means the DMA operation may be broken into several discontinuous smaller chunks. + // Can't handle this case. + // + PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr); + return EFI_OUT_OF_RESOURCES; + } + + ZeroMem ((VOID *)((UINTN)BaseAddr), ByteCount); + + // + // Calculate the 64K align address as PRD Table base address. + // + AlignmentMask = SIZE_64KB - 1; + PrdTableBaseAddr = ((UINTN)BaseAddr + AlignmentMask) & ~AlignmentMask; + PrdTableMapAddr = ((UINTN)BaseMapAddr + AlignmentMask) & ~AlignmentMask; + + // + // Map the host address of DataBuffer to DMA master address. + // + if (Read) { + PciIoOperation = EfiPciIoOperationBusMasterWrite; + } else { + PciIoOperation = EfiPciIoOperationBusMasterRead; + } + + ByteCount = (UINTN)DataLength; + Status = PciIo->Map ( + PciIo, + PciIoOperation, + DataBuffer, + &ByteCount, + &BufferMapAddress, + &BufferMap + ); + if (EFI_ERROR (Status) || (ByteCount != DataLength)) { + PciIo->Unmap (PciIo, PrdTableMap); + PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr); + return EFI_OUT_OF_RESOURCES; + } + + // + // According to Ata spec, it requires the buffer address and size to be even. + // + ASSERT ((BufferMapAddress & 0x1) == 0); + ASSERT ((ByteCount & 0x1) == 0); + + // + // Fill the PRD table with appropriate bus master address of data buffer and data length. + // + ByteRemaining = ByteCount; + TempPrdBaseAddr = (EFI_ATA_DMA_PRD *)(UINTN)PrdTableBaseAddr; + while (ByteRemaining != 0) { + if (ByteRemaining <= 0x10000) { + TempPrdBaseAddr->RegionBaseAddr = (UINT32)((UINTN)BufferMapAddress); + TempPrdBaseAddr->ByteCount = (UINT16)ByteRemaining; + TempPrdBaseAddr->EndOfTable = 0x8000; + break; + } + + TempPrdBaseAddr->RegionBaseAddr = (UINT32)((UINTN)BufferMapAddress); + TempPrdBaseAddr->ByteCount = (UINT16)0x0; + + ByteRemaining -= 0x10000; + BufferMapAddress += 0x10000; + TempPrdBaseAddr++; + } + + // + // Start to enable the DMA operation + // + DeviceHead = AtaCommandBlock->AtaDeviceHead; + + IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | DeviceHead)); + + // + // Enable interrupt to support UDMA + // + DeviceControl = 0; + IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl); + + // + // Read BMIS register and clear ERROR and INTR bit + // + RegisterValue = IdeReadPortB (PciIo, IoPortForBmis); + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + IdeWritePortB (PciIo, IoPortForBmis, RegisterValue); + + // + // Set the base address to BMID register + // + IdeWritePortDW (PciIo, IoPortForBmid, (UINT32)PrdTableMapAddr); + + // + // Set BMIC register to identify the operation direction + // + RegisterValue = IdeReadPortB (PciIo, IoPortForBmic); + if (Read) { + RegisterValue |= BMIC_NREAD; + } else { + RegisterValue &= ~((UINT8)BMIC_NREAD); + } + + IdeWritePortB (PciIo, IoPortForBmic, RegisterValue); + + if (Task != NULL) { + Task->Map = BufferMap; + Task->TableMap = PrdTableMap; + Task->MapBaseAddress = (EFI_ATA_DMA_PRD *)(UINTN)BaseAddr; + Task->PageCount = RealPageCount; + Task->IsStart = TRUE; + } + + // + // Issue ATA command + // + Status = AtaIssueCommand (PciIo, IdeRegisters, AtaCommandBlock, Timeout); + + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + Status = EFI_DEVICE_ERROR; + goto Exit; + } + + // + // Set START bit of BMIC register + // + RegisterValue = IdeReadPortB (PciIo, IoPortForBmic); + RegisterValue |= BMIC_START; + IdeWritePortB (PciIo, IoPortForBmic, RegisterValue); + } + + // + // Check the INTERRUPT and ERROR bit of BMIS + // + if (Task != NULL) { + Status = AtaUdmStatusCheck (PciIo, Task, IdeRegisters); + } else { + Status = AtaUdmStatusWait (PciIo, IdeRegisters, Timeout); + } + + // + // For blocking mode, clear registers and free buffers. + // For non blocking mode, when the related registers have been set or time + // out, or a error has been happened, it needs to clear the register and free + // buffer. + // + if ((Task == NULL) || (Status != EFI_NOT_READY)) { + // + // Read BMIS register and clear ERROR and INTR bit + // + RegisterValue = IdeReadPortB (PciIo, IoPortForBmis); + RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR); + IdeWritePortB (PciIo, IoPortForBmis, RegisterValue); + + // + // Read Status Register of IDE device to clear interrupt + // + RegisterValue = IdeReadPortB (PciIo, IdeRegisters->CmdOrStatus); + + // + // Clear START bit of BMIC register + // + RegisterValue = IdeReadPortB (PciIo, IoPortForBmic); + RegisterValue &= ~((UINT8)BMIC_START); + IdeWritePortB (PciIo, IoPortForBmic, RegisterValue); + + // + // Disable interrupt of Select device + // + DeviceControl = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + DeviceControl |= ATA_CTLREG_IEN_L; + IdeWritePortB (PciIo, IdeRegisters->AltOrDev, DeviceControl); + // + // Stall for 10 milliseconds. + // + MicroSecondDelay (10000); + } + +Exit: + // + // Free all allocated resource + // + if ((Task == NULL) || (Status != EFI_NOT_READY)) { + if (Task != NULL) { + PciIo->Unmap (PciIo, Task->TableMap); + PciIo->FreeBuffer (PciIo, Task->PageCount, Task->MapBaseAddress); + PciIo->Unmap (PciIo, Task->Map); + } else { + PciIo->Unmap (PciIo, PrdTableMap); + PciIo->FreeBuffer (PciIo, RealPageCount, (VOID *)(UINTN)BaseAddr); + PciIo->Unmap (PciIo, BufferMap); + } + + // + // Dump All Ide registers to ATA_STATUS_BLOCK + // + DumpAllIdeRegisters (PciIo, IdeRegisters, AtaStatusBlock); + } + + return Status; +} + +/** + This function reads the pending data in the device. + + @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + + @retval EFI_SUCCESS Successfully read. + @retval EFI_NOT_READY The BSY is set avoiding reading. + +**/ +EFI_STATUS +EFIAPI +AtaPacketReadPendingData ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters + ) +{ + UINT8 AltRegister; + UINT16 TempWordBuffer; + + AltRegister = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + if ((AltRegister & ATA_STSREG_BSY) == ATA_STSREG_BSY) { + return EFI_NOT_READY; + } + + if ((AltRegister & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) { + TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + while ((TempWordBuffer & (ATA_STSREG_BSY | ATA_STSREG_DRQ)) == ATA_STSREG_DRQ) { + IdeReadPortWMultiple ( + PciIo, + IdeRegisters->Data, + 1, + &TempWordBuffer + ); + TempWordBuffer = IdeReadPortB (PciIo, IdeRegisters->AltOrDev); + } + } + + return EFI_SUCCESS; +} + +/** + This function is called by AtaPacketCommandExecute(). + It is used to transfer data between host and device. The data direction is specified + by the fourth parameter. + + @param PciIo A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param IdeRegisters A pointer to EFI_IDE_REGISTERS data structure. + @param Buffer Buffer contained data transferred between host and device. + @param ByteCount Data size in byte unit of the buffer. + @param Read Flag used to determine the data transfer direction. + Read equals 1, means data transferred from device to host; + Read equals 0, means data transferred from host to device. + @param Timeout Timeout value for wait DRQ ready before each data stream's transfer + , uses 100ns as a unit. + + @retval EFI_SUCCESS data is transferred successfully. + @retval EFI_DEVICE_ERROR the device failed to transfer data. +**/ +EFI_STATUS +EFIAPI +AtaPacketReadWrite ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN OUT VOID *Buffer, + IN OUT UINT32 *ByteCount, + IN BOOLEAN Read, + IN UINT64 Timeout + ) +{ + UINT32 RequiredWordCount; + UINT32 ActualWordCount; + UINT32 WordCount; + EFI_STATUS Status; + UINT16 *PtrBuffer; + + PtrBuffer = Buffer; + RequiredWordCount = *ByteCount >> 1; + + // + // No data transfer is permitted. + // + if (RequiredWordCount == 0) { + return EFI_SUCCESS; + } + + // + // ActualWordCount means the word count of data really transferred. + // + ActualWordCount = 0; + + while (ActualWordCount < RequiredWordCount) { + // + // before each data transfer stream, the host should poll DRQ bit ready, + // to see whether indicates device is ready to transfer data. + // + Status = DRQReady2 (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + if (Status == EFI_NOT_READY) { + // + // Device provided less data than we intended to read, or wanted less + // data than we intended to write, but it may still be successful. + // + break; + } else { + return Status; + } + } + + // + // get current data transfer size from Cylinder Registers. + // + WordCount = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb) << 8; + WordCount = WordCount | IdeReadPortB (PciIo, IdeRegisters->CylinderLsb); + WordCount = WordCount & 0xffff; + WordCount /= 2; + + WordCount = MIN (WordCount, (RequiredWordCount - ActualWordCount)); + + if (Read) { + IdeReadPortWMultiple ( + PciIo, + IdeRegisters->Data, + WordCount, + PtrBuffer + ); + } else { + IdeWritePortWMultiple ( + PciIo, + IdeRegisters->Data, + WordCount, + PtrBuffer + ); + } + + // + // read status register to check whether error happens. + // + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + PtrBuffer += WordCount; + ActualWordCount += WordCount; + } + + if (Read) { + // + // In the case where the drive wants to send more data than we need to read, + // the DRQ bit will be set and cause delays from DRQClear2(). + // We need to read data from the drive until it clears DRQ so we can move on. + // + AtaPacketReadPendingData (PciIo, IdeRegisters); + } + + // + // read status register to check whether error happens. + // + Status = CheckStatusRegister (PciIo, IdeRegisters); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + // + // After data transfer is completed, normally, DRQ bit should clear. + // + Status = DRQClear (PciIo, IdeRegisters, Timeout); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + *ByteCount = ActualWordCount << 1; + return Status; +} + +/** + This function is used to send out ATAPI commands conforms to the Packet Command + with PIO Data In Protocol. + + @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance + @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to + store the IDE i/o port registers' base addresses + @param[in] Channel The channel number of device. + @param[in] Device The device number of device. + @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure. + + @retval EFI_SUCCESS send out the ATAPI packet command successfully + and device sends data successfully. + @retval EFI_DEVICE_ERROR the device failed to send data. + +**/ +EFI_STATUS +EFIAPI +AtaPacketCommandExecute ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT8 Channel, + IN UINT8 Device, + IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet + ) +{ + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + EFI_STATUS Status; + UINT8 Count; + UINT8 PacketCommand[12]; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + // + // Fill ATAPI Command Packet according to CDB. + // For Atapi cmd, its length should be less than or equal to 12 bytes. + // + if (Packet->CdbLength > 12) { + return EFI_INVALID_PARAMETER; + } + + ZeroMem (PacketCommand, 12); + CopyMem (PacketCommand, Packet->Cdb, Packet->CdbLength); + + // + // No OVL; No DMA + // + AtaCommandBlock.AtaFeatures = 0x00; + // + // set the transfersize to ATAPI_MAX_BYTE_COUNT to let the device + // determine how many data should be transferred. + // + AtaCommandBlock.AtaCylinderLow = (UINT8)(ATAPI_MAX_BYTE_COUNT & 0x00ff); + AtaCommandBlock.AtaCylinderHigh = (UINT8)(ATAPI_MAX_BYTE_COUNT >> 8); + AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4); + AtaCommandBlock.AtaCommand = ATA_CMD_PACKET; + + IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)(0xe0 | (Device << 0x4))); + // + // Disable interrupt + // + IdeWritePortB (PciIo, IdeRegisters->AltOrDev, ATA_DEFAULT_CTL); + + // + // Issue ATA PACKET command firstly + // + Status = AtaIssueCommand (PciIo, IdeRegisters, &AtaCommandBlock, Packet->Timeout); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = DRQReady (PciIo, IdeRegisters, Packet->Timeout); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Send out ATAPI command packet + // + for (Count = 0; Count < 6; Count++) { + IdeWritePortW (PciIo, IdeRegisters->Data, *((UINT16 *)PacketCommand + Count)); + // + // Stall for 10 microseconds. + // + MicroSecondDelay (10); + } + + // + // Read/Write the data of ATAPI Command + // + if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) { + Status = AtaPacketReadWrite ( + PciIo, + IdeRegisters, + Packet->InDataBuffer, + &Packet->InTransferLength, + TRUE, + Packet->Timeout + ); + } else { + Status = AtaPacketReadWrite ( + PciIo, + IdeRegisters, + Packet->OutDataBuffer, + &Packet->OutTransferLength, + FALSE, + Packet->Timeout + ); + } + + return Status; +} + +/** + Set the calculated Best transfer mode to a detected device. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param TransferMode A pointer to EFI_ATA_TRANSFER_MODE data structure. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Set transfer mode successfully. + @retval EFI_DEVICE_ERROR Set transfer mode failed. + @retval EFI_OUT_OF_RESOURCES Allocate memory failed. + +**/ +EFI_STATUS +EFIAPI +SetDeviceTransferMode ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN EFI_ATA_TRANSFER_MODE *TransferMode, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SET_FEATURES; + AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4); + AtaCommandBlock.AtaFeatures = 0x03; + AtaCommandBlock.AtaSectorCount = *((UINT8 *)TransferMode); + + // + // Send SET FEATURE command (sub command 0x03) to set pio mode. + // + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + return Status; +} + +/** + Set drive parameters for devices not support PACKETS command. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param DriveParameters A pointer to EFI_ATA_DRIVE_PARMS data structure. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Set drive parameter successfully. + @retval EFI_DEVICE_ERROR Set drive parameter failed. + @retval EFI_OUT_OF_RESOURCES Allocate memory failed. + +**/ +EFI_STATUS +EFIAPI +SetDriveParameters ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN EFI_ATA_DRIVE_PARMS *DriveParameters, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_INIT_DRIVE_PARAM; + AtaCommandBlock.AtaSectorCount = DriveParameters->Sector; + AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) + DriveParameters->Heads); + + // + // Send Init drive parameters + // + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_WARN, "Init Drive Parameters Fail, Status = %r\n", Status)); + } + + // + // Send Set Multiple parameters + // + AtaCommandBlock.AtaCommand = ATA_CMD_SET_MULTIPLE_MODE; + AtaCommandBlock.AtaSectorCount = DriveParameters->MultipleSector; + AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4); + + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_WARN, "Set Multiple Mode Parameters Fail, Status = %r\n", Status)); + } + + return Status; +} + +/** + Send SMART Return Status command to check if the execution of SMART cmd is successful or not. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Successfully get the return status of S.M.A.R.T command execution. + @retval Others Fail to get return status data. + +**/ +EFI_STATUS +EFIAPI +IdeAtaSmartReturnStatusCheck ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + UINT8 LBAMid; + UINT8 LBAHigh; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = ATA_SMART_RETURN_STATUS; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0); + + // + // Send S.M.A.R.T Read Return Status command to device + // + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (EFI_ERROR (Status)) { + REPORT_STATUS_CODE ( + EFI_ERROR_CODE | EFI_ERROR_MINOR, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED) + ); + return EFI_DEVICE_ERROR; + } + + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE) + ); + + LBAMid = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderLsb); + LBAHigh = IdeReadPortB (Instance->PciIo, Instance->IdeRegisters[Channel].CylinderMsb); + + if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) { + // + // The threshold exceeded condition is not detected by the device + // + DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n")); + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD) + ); + } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) { + // + // The threshold exceeded condition is detected by the device + // + DEBUG ((DEBUG_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n")); + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD) + ); + } + + return EFI_SUCCESS; +} + +/** + Enable SMART command of the disk if supported. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param IdentifyData A pointer to data buffer which is used to contain IDENTIFY data. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + +**/ +VOID +EFIAPI +IdeAtaSmartSupport ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN EFI_IDENTIFY_DATA *IdentifyData, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + // + // Detect if the device supports S.M.A.R.T. + // + if ((IdentifyData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) { + // + // S.M.A.R.T is not supported by the device + // + DEBUG (( + DEBUG_INFO, + "S.M.A.R.T feature is not supported at [%a] channel [%a] device!\n", + (Channel == 1) ? "secondary" : "primary", + (Device == 1) ? "slave" : "master" + )); + REPORT_STATUS_CODE ( + EFI_ERROR_CODE | EFI_ERROR_MINOR, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED) + ); + } else { + // + // Check if the feature is enabled. If not, then enable S.M.A.R.T. + // + if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) { + REPORT_STATUS_CODE ( + EFI_PROGRESS_CODE, + (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE) + ); + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = ATA_SMART_ENABLE_OPERATION; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0); + + // + // Send S.M.A.R.T Enable command to device + // + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + if (!EFI_ERROR (Status)) { + // + // Send S.M.A.R.T AutoSave command to device + // + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_SMART; + AtaCommandBlock.AtaFeatures = 0xD2; + AtaCommandBlock.AtaSectorCount = 0xF1; + AtaCommandBlock.AtaCylinderLow = ATA_CONSTANT_4F; + AtaCommandBlock.AtaCylinderHigh = ATA_CONSTANT_C2; + AtaCommandBlock.AtaDeviceHead = (UINT8)((Device << 0x4) | 0xe0); + + Status = AtaNonDataCommandIn ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + if (!EFI_ERROR (Status)) { + Status = IdeAtaSmartReturnStatusCheck ( + Instance, + Channel, + Device, + AtaStatusBlock + ); + } + } + } + + DEBUG (( + DEBUG_INFO, + "Enabled S.M.A.R.T feature at [%a] channel [%a] device!\n", + (Channel == 1) ? "secondary" : "primary", + (Device == 1) ? "slave" : "master" + )); + } + + return; +} + +/** + Sends out an ATA Identify Command to the specified device. + + This function is called by DiscoverIdeDevice() during its device + identification. It sends out the ATA Identify Command to the + specified device. Only ATA device responses to this command. If + the command succeeds, it returns the Identify data structure which + contains information about the device. This function extracts the + information it needs to fill the IDE_BLK_IO_DEV data structure, + including device type, media block size, media capacity, and etc. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param Buffer A pointer to data buffer which is used to contain IDENTIFY data. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Identify ATA device successfully. + @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device. + @retval EFI_OUT_OF_RESOURCES Allocate memory failed. + +**/ +EFI_STATUS +EFIAPI +AtaIdentify ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN OUT EFI_IDENTIFY_DATA *Buffer, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE; + AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4); + + Status = AtaPioDataInOut ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + Buffer, + sizeof (EFI_IDENTIFY_DATA), + TRUE, + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + return Status; +} + +/** + This function is called by DiscoverIdeDevice() during its device + identification. + Its main purpose is to get enough information for the device media + to fill in the Media data structure of the Block I/O Protocol interface. + + There are 5 steps to reach such objective: + 1. Sends out the ATAPI Identify Command to the specified device. + Only ATAPI device responses to this command. If the command succeeds, + it returns the Identify data structure which filled with information + about the device. Since the ATAPI device contains removable media, + the only meaningful information is the device module name. + 2. Sends out ATAPI Inquiry Packet Command to the specified device. + This command will return inquiry data of the device, which contains + the device type information. + 3. Allocate sense data space for future use. We don't detect the media + presence here to improvement boot performance, especially when CD + media is present. The media detection will be performed just before + each BLK_IO read/write + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param Channel The channel number of device. + @param Device The device number of device. + @param Buffer A pointer to data buffer which is used to contain IDENTIFY data. + @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK data structure. + + @retval EFI_SUCCESS Identify ATAPI device successfully. + @retval EFI_DEVICE_ERROR ATA Identify Packet Device Command failed or device type + is not supported by this IDE driver. + @retval EFI_OUT_OF_RESOURCES Allocate memory failed. + +**/ +EFI_STATUS +EFIAPI +AtaIdentifyPacket ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 Channel, + IN UINT8 Device, + IN OUT EFI_IDENTIFY_DATA *Buffer, + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock + ) +{ + EFI_STATUS Status; + EFI_ATA_COMMAND_BLOCK AtaCommandBlock; + + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK)); + + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DEVICE; + AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4); + + // + // Send ATAPI Identify Command to get IDENTIFY data. + // + Status = AtaPioDataInOut ( + Instance->PciIo, + &Instance->IdeRegisters[Channel], + (VOID *)Buffer, + sizeof (EFI_IDENTIFY_DATA), + TRUE, + &AtaCommandBlock, + AtaStatusBlock, + ATA_ATAPI_TIMEOUT, + NULL + ); + + return Status; +} + +/** + This function is used for detect whether the IDE device exists in the + specified Channel as the specified Device Number. + + There is two IDE channels: one is Primary Channel, the other is + Secondary Channel.(Channel is the logical name for the physical "Cable".) + Different channel has different register group. + + On each IDE channel, at most two IDE devices attach, + one is called Device 0 (Master device), the other is called Device 1 + (Slave device). The devices on the same channel co-use the same register + group, so before sending out a command for a specified device via command + register, it is a must to select the current device to accept the command + by set the device number in the Head/Device Register. + + @param Instance A pointer to ATA_ATAPI_PASS_THRU_INSTANCE data structure. + @param IdeChannel The channel number of device. + + @retval EFI_SUCCESS successfully detects device. + @retval other any failure during detection process will return this value. + +**/ +EFI_STATUS +EFIAPI +DetectAndConfigIdeDevice ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance, + IN UINT8 IdeChannel + ) +{ + EFI_STATUS Status; + UINT8 SectorCountReg; + UINT8 LBALowReg; + UINT8 LBAMidReg; + UINT8 LBAHighReg; + EFI_ATA_DEVICE_TYPE DeviceType; + UINT8 IdeDevice; + EFI_IDE_REGISTERS *IdeRegisters; + EFI_IDENTIFY_DATA Buffer; + + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; + EFI_PCI_IO_PROTOCOL *PciIo; + + EFI_ATA_COLLECTIVE_MODE *SupportedModes; + EFI_ATA_TRANSFER_MODE TransferMode; + EFI_ATA_DRIVE_PARMS DriveParameters; + + IdeRegisters = &Instance->IdeRegisters[IdeChannel]; + IdeInit = Instance->IdeControllerInit; + PciIo = Instance->PciIo; + + for (IdeDevice = 0; IdeDevice < EfiIdeMaxDevice; IdeDevice++) { + // + // Select Master or Slave device to get the return signature for ATA DEVICE DIAGNOSTIC cmd. + // + IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)((IdeDevice << 4) | 0xe0)); + + // + // Send ATA Device Execut Diagnostic command. + // This command should work no matter DRDY is ready or not + // + IdeWritePortB (PciIo, IdeRegisters->CmdOrStatus, ATA_CMD_EXEC_DRIVE_DIAG); + + Status = WaitForBSYClear (PciIo, IdeRegisters, 350000000); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "New detecting method: Send Execute Diagnostic Command: WaitForBSYClear: Status: %d\n", Status)); + continue; + } + + // + // Select Master or Slave device to get the return signature for ATA DEVICE DIAGNOSTIC cmd. + // + IdeWritePortB (PciIo, IdeRegisters->Head, (UINT8)((IdeDevice << 4) | 0xe0)); + // + // Stall for 1 milliseconds. + // + MicroSecondDelay (1000); + + SectorCountReg = IdeReadPortB (PciIo, IdeRegisters->SectorCount); + LBALowReg = IdeReadPortB (PciIo, IdeRegisters->SectorNumber); + LBAMidReg = IdeReadPortB (PciIo, IdeRegisters->CylinderLsb); + LBAHighReg = IdeReadPortB (PciIo, IdeRegisters->CylinderMsb); + + // + // Refer to ATA/ATAPI 4 Spec, section 9.1 + // + if ((SectorCountReg == 0x1) && (LBALowReg == 0x1) && (LBAMidReg == 0x0) && (LBAHighReg == 0x0)) { + DeviceType = EfiIdeHarddisk; + } else if ((LBAMidReg == 0x14) && (LBAHighReg == 0xeb)) { + DeviceType = EfiIdeCdrom; + } else { + continue; + } + + // + // Send IDENTIFY cmd to the device to test if it is really attached. + // + if (DeviceType == EfiIdeHarddisk) { + Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL); + // + // if identifying ata device is failure, then try to send identify packet cmd. + // + if (EFI_ERROR (Status)) { + REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_EC_NOT_DETECTED)); + + DeviceType = EfiIdeCdrom; + Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL); + } + } else { + Status = AtaIdentifyPacket (Instance, IdeChannel, IdeDevice, &Buffer, NULL); + // + // if identifying atapi device is failure, then try to send identify cmd. + // + if (EFI_ERROR (Status)) { + DeviceType = EfiIdeHarddisk; + Status = AtaIdentify (Instance, IdeChannel, IdeDevice, &Buffer, NULL); + } + } + + if (EFI_ERROR (Status)) { + // + // No device is found at this port + // + continue; + } + + DEBUG (( + DEBUG_INFO, + "[%a] channel [%a] [%a] device\n", + (IdeChannel == 1) ? "secondary" : "primary ", + (IdeDevice == 1) ? "slave " : "master", + DeviceType == EfiIdeCdrom ? "cdrom " : "harddisk" + )); + // + // If the device is a hard disk, then try to enable S.M.A.R.T feature + // + if ((DeviceType == EfiIdeHarddisk) && PcdGetBool (PcdAtaSmartEnable)) { + IdeAtaSmartSupport ( + Instance, + IdeChannel, + IdeDevice, + &Buffer, + NULL + ); + } + + // + // Submit identify data to IDE controller init driver + // + IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &Buffer); + + // + // Now start to config ide device parameter and transfer mode. + // + Status = IdeInit->CalculateMode ( + IdeInit, + IdeChannel, + IdeDevice, + &SupportedModes + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Calculate Mode Fail, Status = %r\n", Status)); + continue; + } + + // + // Set best supported PIO mode on this IDE device + // + if (SupportedModes->PioMode.Mode <= EfiAtaPioMode2) { + TransferMode.ModeCategory = EFI_ATA_MODE_DEFAULT_PIO; + } else { + TransferMode.ModeCategory = EFI_ATA_MODE_FLOW_PIO; + } + + TransferMode.ModeNumber = (UINT8)(SupportedModes->PioMode.Mode); + + if (SupportedModes->ExtModeCount == 0) { + Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status)); + continue; + } + } + + // + // Set supported DMA mode on this IDE device. Note that UDMA & MDMA can't + // be set together. Only one DMA mode can be set to a device. If setting + // DMA mode operation fails, we can continue moving on because we only use + // PIO mode at boot time. DMA modes are used by certain kind of OS booting + // + if (SupportedModes->UdmaMode.Valid) { + TransferMode.ModeCategory = EFI_ATA_MODE_UDMA; + TransferMode.ModeNumber = (UINT8)(SupportedModes->UdmaMode.Mode); + Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status)); + continue; + } + } else if (SupportedModes->MultiWordDmaMode.Valid) { + TransferMode.ModeCategory = EFI_ATA_MODE_MDMA; + TransferMode.ModeNumber = (UINT8)SupportedModes->MultiWordDmaMode.Mode; + Status = SetDeviceTransferMode (Instance, IdeChannel, IdeDevice, &TransferMode, NULL); + + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "Set transfer Mode Fail, Status = %r\n", Status)); + continue; + } + } + + // + // Set Parameters for the device: + // 1) Init + // 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command + // + if (DeviceType == EfiIdeHarddisk) { + // + // Init drive parameters + // + DriveParameters.Sector = (UINT8)((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->sectors_per_track; + DriveParameters.Heads = (UINT8)(((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->heads - 1); + DriveParameters.MultipleSector = (UINT8)((ATA5_IDENTIFY_DATA *)(&Buffer.AtaData))->multi_sector_cmd_max_sct_cnt; + + SetDriveParameters (Instance, IdeChannel, IdeDevice, &DriveParameters, NULL); + } + + // + // Set IDE controller Timing Blocks in the PCI Configuration Space + // + IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes); + + // + // IDE controller and IDE device timing is configured successfully. + // Now insert the device into device list. + // + Status = CreateNewDeviceInfo (Instance, IdeChannel, IdeDevice, DeviceType, &Buffer); + if (EFI_ERROR (Status)) { + continue; + } + + if (DeviceType == EfiIdeHarddisk) { + REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_PERIPHERAL_FIXED_MEDIA | EFI_P_PC_ENABLE)); + } + } + + return EFI_SUCCESS; +} + +/** + Initialize ATA host controller at IDE mode. + + The function is designed to initialize ATA host controller. + + @param[in] Instance A pointer to the ATA_ATAPI_PASS_THRU_INSTANCE instance. + +**/ +EFI_STATUS +EFIAPI +IdeModeInitialization ( + IN ATA_ATAPI_PASS_THRU_INSTANCE *Instance + ) +{ + EFI_STATUS Status; + EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit; + EFI_PCI_IO_PROTOCOL *PciIo; + UINT8 Channel; + UINT8 IdeChannel; + BOOLEAN ChannelEnabled; + UINT8 MaxDevices; + + IdeInit = Instance->IdeControllerInit; + PciIo = Instance->PciIo; + Channel = IdeInit->ChannelCount; + + // + // Obtain IDE IO port registers' base addresses + // + Status = GetIdeRegisterIoAddr (PciIo, Instance->IdeRegisters); + if (EFI_ERROR (Status)) { + goto ErrorExit; + } + + for (IdeChannel = 0; IdeChannel < Channel; IdeChannel++) { + IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel); + + // + // now obtain channel information fron IdeControllerInit protocol. + // + Status = IdeInit->GetChannelInfo ( + IdeInit, + IdeChannel, + &ChannelEnabled, + &MaxDevices + ); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "[GetChannel, Status=%x]", Status)); + continue; + } + + if (!ChannelEnabled) { + continue; + } + + ASSERT (MaxDevices <= 2); + // + // Now inform the IDE Controller Init Module. + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel); + + // + // No reset channel function implemented. + // + IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel); + + // + // Now inform the IDE Controller Init Module. + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBusBeforeDevicePresenceDetection, IdeChannel); + + // + // Detect all attached ATA devices and set the transfer mode for each device. + // + DetectAndConfigIdeDevice (Instance, IdeChannel); + } + + // + // All configurations done! Notify IdeController to do post initialization + // work such as saving IDE controller PCI settings for S3 resume + // + IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0); + +ErrorExit: + return Status; +} diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h index ce6c9151cd..8020cd2689 100644 --- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h +++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/IdeMode.h @@ -1,198 +1,198 @@ -/** @file
- Header file for IDE mode of ATA host controller.
-
- Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef __ATA_HC_IDE_MODE_H__
-#define __ATA_HC_IDE_MODE_H__
-
-typedef enum {
- EfiIdePrimary = 0,
- EfiIdeSecondary = 1,
- EfiIdeMaxChannel = 2
-} EFI_IDE_CHANNEL;
-
-typedef enum {
- EfiIdeMaster = 0,
- EfiIdeSlave = 1,
- EfiIdeMaxDevice = 2
-} EFI_IDE_DEVICE;
-
-///
-/// PIO mode definition
-///
-typedef enum {
- EfiAtaPioModeBelow2,
- EfiAtaPioMode2,
- EfiAtaPioMode3,
- EfiAtaPioMode4
-} EFI_ATA_PIO_MODE;
-
-//
-// Multi word DMA definition
-//
-typedef enum {
- EfiAtaMdmaMode0,
- EfiAtaMdmaMode1,
- EfiAtaMdmaMode2
-} EFI_ATA_MDMA_MODE;
-
-//
-// UDMA mode definition
-//
-typedef enum {
- EfiAtaUdmaMode0,
- EfiAtaUdmaMode1,
- EfiAtaUdmaMode2,
- EfiAtaUdmaMode3,
- EfiAtaUdmaMode4,
- EfiAtaUdmaMode5
-} EFI_ATA_UDMA_MODE;
-
-//
-// Bus Master Reg
-//
-#define BMIC_NREAD BIT3
-#define BMIC_START BIT0
-#define BMIS_INTERRUPT BIT2
-#define BMIS_ERROR BIT1
-
-#define BMIC_OFFSET 0x00
-#define BMIS_OFFSET 0x02
-#define BMID_OFFSET 0x04
-
-//
-// IDE transfer mode
-//
-#define EFI_ATA_MODE_DEFAULT_PIO 0x00
-#define EFI_ATA_MODE_FLOW_PIO 0x01
-#define EFI_ATA_MODE_MDMA 0x04
-#define EFI_ATA_MODE_UDMA 0x08
-
-typedef struct {
- UINT32 RegionBaseAddr;
- UINT16 ByteCount;
- UINT16 EndOfTable;
-} EFI_ATA_DMA_PRD;
-
-typedef struct {
- UINT8 ModeNumber : 3;
- UINT8 ModeCategory : 5;
-} EFI_ATA_TRANSFER_MODE;
-
-typedef struct {
- UINT8 Sector;
- UINT8 Heads;
- UINT8 MultipleSector;
-} EFI_ATA_DRIVE_PARMS;
-
-//
-// IDE registers set
-//
-typedef struct {
- UINT16 Data;
- UINT16 ErrOrFeature;
- UINT16 SectorCount;
- UINT16 SectorNumber;
- UINT16 CylinderLsb;
- UINT16 CylinderMsb;
- UINT16 Head;
- UINT16 CmdOrStatus;
- UINT16 AltOrDev;
-
- UINT16 BusMasterBaseAddr;
-} EFI_IDE_REGISTERS;
-
-//
-// Bit definitions in Programming Interface byte of the Class Code field
-// in PCI IDE controller's Configuration Space
-//
-#define IDE_PRIMARY_OPERATING_MODE BIT0
-#define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1
-#define IDE_SECONDARY_OPERATING_MODE BIT2
-#define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3
-
-/**
- Get IDE i/o port registers' base addresses by mode.
-
- In 'Compatibility' mode, use fixed addresses.
- In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
- Configuration Space.
-
- The steps to get IDE i/o port registers' base addresses for each channel
- as follows:
-
- 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
- controller's Configuration Space to determine the operating mode.
-
- 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
- ___________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|_______________|_______________|
- | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
- |___________|_______________|_______________|
- | Secondary | 170h - 177h | 376h - 377h |
- |___________|_______________|_______________|
-
- Table 1. Compatibility resource mappings
-
- b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
- in IDE controller's PCI Configuration Space, shown in the Table 2 below.
- ___________________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|___________________|___________________|
- | Primary | BAR at offset 0x10| BAR at offset 0x14|
- |___________|___________________|___________________|
- | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
- |___________|___________________|___________________|
-
- Table 2. BARs for Register Mapping
-
- @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
- @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
-
- @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configuration data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetIdeRegisterIoAddr (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN OUT EFI_IDE_REGISTERS *IdeRegisters
- );
-
-/**
- This function is used to send out ATAPI commands conforms to the Packet Command
- with PIO Data In Protocol.
-
- @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance
- @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
- @param[in] Channel The channel number of device.
- @param[in] Device The device number of device.
- @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure.
-
- @retval EFI_SUCCESS send out the ATAPI packet command successfully
- and device sends data successfully.
- @retval EFI_DEVICE_ERROR the device failed to send data.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPacketCommandExecute (
- IN EFI_PCI_IO_PROTOCOL *PciIo,
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
- );
-
-#endif
+/** @file + Header file for IDE mode of ATA host controller. + + Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef __ATA_HC_IDE_MODE_H__ +#define __ATA_HC_IDE_MODE_H__ + +typedef enum { + EfiIdePrimary = 0, + EfiIdeSecondary = 1, + EfiIdeMaxChannel = 2 +} EFI_IDE_CHANNEL; + +typedef enum { + EfiIdeMaster = 0, + EfiIdeSlave = 1, + EfiIdeMaxDevice = 2 +} EFI_IDE_DEVICE; + +/// +/// PIO mode definition +/// +typedef enum { + EfiAtaPioModeBelow2, + EfiAtaPioMode2, + EfiAtaPioMode3, + EfiAtaPioMode4 +} EFI_ATA_PIO_MODE; + +// +// Multi word DMA definition +// +typedef enum { + EfiAtaMdmaMode0, + EfiAtaMdmaMode1, + EfiAtaMdmaMode2 +} EFI_ATA_MDMA_MODE; + +// +// UDMA mode definition +// +typedef enum { + EfiAtaUdmaMode0, + EfiAtaUdmaMode1, + EfiAtaUdmaMode2, + EfiAtaUdmaMode3, + EfiAtaUdmaMode4, + EfiAtaUdmaMode5 +} EFI_ATA_UDMA_MODE; + +// +// Bus Master Reg +// +#define BMIC_NREAD BIT3 +#define BMIC_START BIT0 +#define BMIS_INTERRUPT BIT2 +#define BMIS_ERROR BIT1 + +#define BMIC_OFFSET 0x00 +#define BMIS_OFFSET 0x02 +#define BMID_OFFSET 0x04 + +// +// IDE transfer mode +// +#define EFI_ATA_MODE_DEFAULT_PIO 0x00 +#define EFI_ATA_MODE_FLOW_PIO 0x01 +#define EFI_ATA_MODE_MDMA 0x04 +#define EFI_ATA_MODE_UDMA 0x08 + +typedef struct { + UINT32 RegionBaseAddr; + UINT16 ByteCount; + UINT16 EndOfTable; +} EFI_ATA_DMA_PRD; + +typedef struct { + UINT8 ModeNumber : 3; + UINT8 ModeCategory : 5; +} EFI_ATA_TRANSFER_MODE; + +typedef struct { + UINT8 Sector; + UINT8 Heads; + UINT8 MultipleSector; +} EFI_ATA_DRIVE_PARMS; + +// +// IDE registers set +// +typedef struct { + UINT16 Data; + UINT16 ErrOrFeature; + UINT16 SectorCount; + UINT16 SectorNumber; + UINT16 CylinderLsb; + UINT16 CylinderMsb; + UINT16 Head; + UINT16 CmdOrStatus; + UINT16 AltOrDev; + + UINT16 BusMasterBaseAddr; +} EFI_IDE_REGISTERS; + +// +// Bit definitions in Programming Interface byte of the Class Code field +// in PCI IDE controller's Configuration Space +// +#define IDE_PRIMARY_OPERATING_MODE BIT0 +#define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1 +#define IDE_SECONDARY_OPERATING_MODE BIT2 +#define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3 + +/** + Get IDE i/o port registers' base addresses by mode. + + In 'Compatibility' mode, use fixed addresses. + In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's + Configuration Space. + + The steps to get IDE i/o port registers' base addresses for each channel + as follows: + + 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE + controller's Configuration Space to determine the operating mode. + + 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below. + ___________________________________________ + | | Command Block | Control Block | + | Channel | Registers | Registers | + |___________|_______________|_______________| + | Primary | 1F0h - 1F7h | 3F6h - 3F7h | + |___________|_______________|_______________| + | Secondary | 170h - 177h | 376h - 377h | + |___________|_______________|_______________| + + Table 1. Compatibility resource mappings + + b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs + in IDE controller's PCI Configuration Space, shown in the Table 2 below. + ___________________________________________________ + | | Command Block | Control Block | + | Channel | Registers | Registers | + |___________|___________________|___________________| + | Primary | BAR at offset 0x10| BAR at offset 0x14| + |___________|___________________|___________________| + | Secondary | BAR at offset 0x18| BAR at offset 0x1C| + |___________|___________________|___________________| + + Table 2. BARs for Register Mapping + + @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance + @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to + store the IDE i/o port registers' base addresses + + @retval EFI_UNSUPPORTED Return this value when the BARs is not IO type + @retval EFI_SUCCESS Get the Base address successfully + @retval Other Read the pci configuration data error + +**/ +EFI_STATUS +EFIAPI +GetIdeRegisterIoAddr ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN OUT EFI_IDE_REGISTERS *IdeRegisters + ); + +/** + This function is used to send out ATAPI commands conforms to the Packet Command + with PIO Data In Protocol. + + @param[in] PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance + @param[in] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to + store the IDE i/o port registers' base addresses + @param[in] Channel The channel number of device. + @param[in] Device The device number of device. + @param[in] Packet A pointer to EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure. + + @retval EFI_SUCCESS send out the ATAPI packet command successfully + and device sends data successfully. + @retval EFI_DEVICE_ERROR the device failed to send data. + +**/ +EFI_STATUS +EFIAPI +AtaPacketCommandExecute ( + IN EFI_PCI_IO_PROTOCOL *PciIo, + IN EFI_IDE_REGISTERS *IdeRegisters, + IN UINT8 Channel, + IN UINT8 Device, + IN EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet + ); + +#endif |