summaryrefslogtreecommitdiff
path: root/meta-evb
AgeCommit message (Collapse)AuthorFilesLines
2026-09-11meta-evb: mctp: add systemd inheritPatrick Williams1-0/+2
Platforms use SYSTEMD_SERVICE directives to install systemd services without actually inheriting the systemd bbclass. This breaks install with later OpenEmbedded updates. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Idbe60ec12b7dcbb35a68c09bcbac9b813c3f982f
2026-08-04meta-evb-fvp-base: u-boot: fw_print/setenv supportMohammed Javith Akthar M4-1/+13
Enable u-boot environment variables access from linux userspace Testing: 1. In BMC console, execute the following and check a. `fw_printenv` to print u-boot env variables b. `fw_setenv var value` to add/update u-boot env variable Change-Id: I6b938226fab99e25bbb752dfe2e3e1844c5de79a Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2026-06-19meta-evb-fvp-base: add ipv6 supportMohammed Javith Akthar M3-0/+68
Enable ipv6 support for BMC out-of-band access Testing: 1. Configure TAP interface with ipv6 support 2. Boot the fvp 3. Check BMC out-of-band access via ipv6 address > curl -k -u root:0penBmc -X GET https://[fd00:abcd::13e]/redfish/v1 Change-Id: Iacfaca39e3f6d0e08c9719dd2a7d0033f6aaec79 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2026-06-18meta-evb-fvp-base: u-boot: enable saveenvMohammed Javith Akthar M2-0/+10
Enable persistent u-boot environment storage on mmc Testing: Stop at u-boot prompt and verify env persistence ```sh setenv test 1 saveenv reset printenv ``` Change-Id: Ia2b0efde28527fabec9617f262ebaf037546d7f3 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2026-06-18meta-evb-fvp-base: update kernel defconfigMohammed Javith Akthar M1-1/+1
CONFIG_LIBCRC32C is removed in kernel[1]. Update the defconfig to fix the warning message when building kernel. [1]: https://github.com/torvalds/linux/commit/b261d2222063a9a8b9ec284244c285f2998ee01e ```bash WARNING: linux-yocto-6.18.35+git-r0 do_kernel_configcheck: [kernel config]: This BSP contains fragments with warnings: [INFO]: the following symbols were not found in the active configuration: - CONFIG_LIBCRC32C ``` Testing: Able to build and boot kernel in FVP. Change-Id: I1dd300ed04a48f098d41eee8fb377212176bee68 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2026-06-17meta-evb-fvp-base: Fix boot issue due to subtree updateJohn Chung4-7/+6
Update the secure flashloader and flashloader paths to align with the meta-arm recipe changes. Also migrate to the new U-Boot environment variable configuration (CONFIG_ENV_SOURCE_FILE) introduced in the newer U-Boot version. Change-Id: Idb80b526511f71ddd2445aeeb70da06500fdd40b Signed-off-by: John Chung <john.chung@arm.com>
2026-06-17meta-evb-fvp-base: move wic files to fix build errorMohammed Javith Akthar M1-0/+0
OpenEmbedded-Core (OE-Core) now requires wic files to be placed under the files/wic path[1]. [1]: https://docs.yoctoproject.org/dev/migration-guides/migration-6.0.html#wic-files-to-be-moved-under-files-wic Testing: (Before Fix) ```bash ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: wic/wks files at /home/javith/openbmc/meta-evb/meta-evb-arm/meta-evb-fvp-base/wic need to be moved to files/wic within the layer to be found/used wic/wks files at /home/javith/openbmc/meta-evb/meta-evb-arm/meta-evb-fvp-base/wic need to be moved to files/wic within the layer to be found/used ``` Change-Id: I8978b3c9d25280a224b846da0bc26303fb9b8f57 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2026-03-28treewide: update release compatibilityPatrick Williams8-8/+8
Latest yocto release will be wrynose; update layer compatibilities accordingly. Squash numerous commits from each upstream-layers subtree: (cherry picked from commit cd1179544d74026c99a4938824146cec4f5acfca) (cherry picked from commit 930a65579d2c159ce0b05cf81916d20a04f5835f) (cherry picked from commit 8028c573db6923525c2918724f2bd36d4a420e0b) (cherry picked from commit 1e4a9929a90a6f9608e8df7ec073d3467b6ee217) (cherry picked from commit a75c2f0b6f9d10c116b3da7106234bce6c8c1a4f) Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ia5b19ed374bbc3f7a5aced7ef8bb4ec1f0da9444
2026-03-06meta-evb: meta-evb-arm: Switch to linux-yocto-fitimage recipeJohn Chung1-2/+11
Change-Id: I94ce2c4d84c4b3eac13000b79725aa91cab65062 Signed-off-by: John Chung <john.chung@arm.com>
2025-12-18meta-evb: meta-evb-arm: Add OWNERS fileJohn Chung1-0/+2
Add myself to the owners list for meta-evb-arm Change-Id: I6aca6412cfee4432c2dcb531eecff9413362c3e6 Signed-off-by: John Chung <john.chung@arm.com>
2025-12-05meta-evb-fvp-base: enable SOL access over IPMI & SSHMohammed Javith Akthar M3-19/+54
Enabled SOL access over IPMI & SSH for ARM FVP. This commit[1] configures BMC eth0 interface using TAP interface. So updated readme[2] file for BMC out-of-band access accordingly. Testing: Verified SOL access over SSH & IPMI using BMC eth0 interface. Refer readme[2] file for configuration and testing steps. References: 1. https://github.com/openbmc/openbmc/commit/1eb0b064bcd64bd443a06777f3ad0c490ca1209c 2. https://github.com/openbmc/openbmc/blob/master/meta-evb/meta-evb-arm/meta-evb-fvp-base/README.md Change-Id: Ia4d6c456b442fbf52c1a96f7b785804d7dd71701 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-11-24meta-evb-fvp-base: enable rate-limit for arm fvpMohammed Javith Akthar M1-0/+2
Rate limit ARM FVP simulation to prevent running faster than wall clock time. More information on this can be found in ARM documentation[1]. Testing: Observe the CLCD window when launching FVP. rate-limit toggle[2] should be enabled by default. References: 1. https://developer.arm.com/documentation/100966/1128/Getting-Started-with-Fixed-Virtual-Platforms/Timing-considerations-for-FVPs 2. https://developer.arm.com/documentation/100961/1129/Programming-Reference/CLCD-window?lang=en Change-Id: I313622d3557748bd100d3c73829c8ae3af7e543e Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-11-11meta-evb-fvp-base: update readme for better readabilityMohammed Javith Akthar M1-32/+37
Added context for ARM FVP. Reorg some sections for improved readability. Change-Id: Ic0fcc1a9ba32d669e2daadb8588cefec7671b9bd Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-11-11meta-evb-fvp-base: add oeqa fvp_boot test suitMohammed Javith Akthar M1-0/+5
This commit enables fvp_boot oeqa test suit configuration for fvp. Refer oeqa-fvp.md[1] in meta-arm layer for additional information. By default, this configuration will be disabled in build. Requires fvp-base-a-aem.bb (version 11.28.x or later) in meta-arm layer. Testing: 1. source setup fvp 2. Define TESTIMAGE_AUTO ?= "1" in local.conf file 3. bitbake obmc-phosphor-image Result: ... Creating terminal default on terminal_0 Transitioned to OEFVPTargetState.ON Transitioned to linux Transitioned to OEFVPTargetState.OFF RESULTS: RESULTS - fvp_boot.FVPBootTest.test_fvp_boot: PASSED (138.26s) SUMMARY: obmc-phosphor-image () - Ran 1 test in 138.264s obmc-phosphor-image - OK - All required tests passed (successes=1, skipped=0, failures=0, errors=0) Change default timeout value to simulate failure case 1. Define TEST_FVP_LINUX_BOOT_TIMEOUT ?= "60" in fvp.conf 2. bitbake obmc-phosphor-image -c cleanall 3. bitbake obmc-phosphor-image -c testimage Result: ... Creating terminal default on terminal_0 Transitioned to OEFVPTargetState.ON .... Transitioned to OEFVPTargetState.LINUX Transitioned to OEFVPTargetState.OFF RESULTS: RESULTS - fvp_boot.FVPBootTest.test_fvp_boot: ERROR (60.16s) SUMMARY: obmc-phosphor-image () - Ran 1 test in 60.163s obmc-phosphor-image - FAIL - Required tests failed (successes=0, skipped=0, failures=0, errors=1) References 1. https://github.com/openbmc/openbmc/blob/master/meta-arm/documentation/oeqa-fvp.md Change-Id: Ie45985bc3fee64e2f42fcbe60d944e8c9a250bff Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-11-07meta-evb-fvp-base: remove redundant rsyslogBrad Bishop1-7/+0
This snippet is included by default now with the imjournal PACKAGECONFIG enabled. Note that this does increase RateLimit.Burst from 2000 to 4000, which helps with unnecessary rate limiting according to b1177476c. Change-Id: I29bc42a874a8f6e53b6b3e37760869c355451461 Signed-off-by: Brad Bishop <bradbish@qti.qualcomm.com>
2025-10-30meta-nuvoton: Use openbmc-tpm package groupManojkiran Eda1-0/+1
Switch to use the new conf/machine/include style for adding the respective tpm support. Change-Id: Ie6b053122a30e48a44c287444ee89df57e105cc8 Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
2025-09-13meta-evb: meta-evb-arm: Enable smbios-mdr & phosphor-ipmi-blobsJohn Chung2-0/+7
Enable smbios-mdr and phosphor-ipmi-blobs to construct related inventory from smbios table, such as CPU and DIMM. Signed-off-by: John Chung <john.chung@arm.com> Change-Id: I15f32fb0aaa19a8eb19fd3f353d70052c019812a
2025-09-13meta-evb: meta-evb-arm: Add rsyslog configurationsJohn Chung6-0/+146
Add rsyslog configurations to enable system event log for Redfish. Sync the events from systemd to /var/log/redfish and /var/log/ipmi_sel The files will be used by Redfish service. Signed-off-by: John Chung <john.chung@arm.com> Change-Id: I6c8e2b976f044bdbce9d8120ba97af8baf20c497
2025-08-21meta-evb-fvp-base: fix bitbake warningsMohammed Javith Akthar M2-6/+5
Addressed the following warning messages when building the FVP machine configuration 1. WARNING: fvp-config.inc has a lack of whitespace around the assignment 2. WARNING: Duplicate inclusion for mctp.inc in pldm.inc Testing: Before fix: Warning messages were displayed when executing the "bitbake obmc-phosphor-image" command. After fix: Warning messages are no longer displayed. Change-Id: Ib63e4357a3abe0f383d6aa8c580286824f01bed8 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-07-24meta-evb-fvpbase: enable virtio-net for FVPMohammed Javith Akthar M3-1/+5
Enable virtio-net as an alternative NIC in FVP. FVP uses smsc_91c111 for NIC and its support is deprecated in uboot[1]. So, an alternative NIC configuration is required for network access in uboot. Testing: Configured a TAP interface named 'tap1' for out-of-band access. Sample setup on Ubuntu (requires sudo): sudo apt update sudo apt install qemu-kvm libvirt-daemon-system iproute2 bridge-utils sudo ip tuntap add dev tap1 mode tap user $(whoami) sudo ifconfig tap1 0.0.0.0 promisc up sudo brctl addif virbr0 tap1 Execute 'ip a' command in BMC shell and observe the NIC configuration. Before: eth0 -> smsc_91c111 After: eth0 -> virtio-net eth1 -> smsc_91c111 References: 1. https://patchwork.ozlabs.org/project/uboot/patch/20220802113424.2988464-10-trini@konsulko.com Change-Id: I445aecb6aefdb422a14fe131a64fc3de3b6865f9 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-07-23treewide: add whinlatter LAYERSERIES_COMPATPatrick Williams8-8/+8
Change-Id: I1d53510329749ff122c8a65157a72c8ff88bd306 Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2025-07-22meta-phosphor: bmcweb options to PACKAGECONFIGEd Tanous1-2/+2
For some of the most commonly set bmcweb options, change them into packageconfig entries. Systems that used these config options have been moved to the PACKAGECONFIG. Some systems that had CMAKE build options still had those directly removed. Change-Id: I741f60a725905d67f7a8ef698f95b25895088db4 Signed-off-by: Ed Tanous <etanous@nvidia.com>
2025-07-07meta-evb: add whitespace around variable definitionsPatrick Williams1-1/+1
Latest bitbake gives a QA warning for "lack of whitespace around the assignment". Clean these up. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I7ec3f2a0471a99611071db0aefc2ec6b1323e3ca
2025-07-02meta-evb: move meta-aspeed EVB machine into meta-evbVince Chang2-2/+37
Move evb-ast2500.conf and evb-ast2600.conf into meta-evb. Change-Id: I64bd938eb63dfe77ffe74e1de25f177291fe65c2 Signed-off-by: Vince Chang <vince_chang@aspeedtech.com>
2025-06-02meta-evb: meta-evb-arm: Support Arm SBMR Boot Progress CodeJohn Chung4-1/+6
Enable IPMI SBMR commands to capture the boot progress code and update on Redfish BootProgress property and Redfish PostCodes log service. Change-Id: I8e3b5eb777f69c8932fb088db09d3088635a4a9e Signed-off-by: John Chung <john.chung@arm.com>
2025-05-24treewide: add walnascar LAYERSERIES_COMPATPatrick Williams8-8/+8
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I6291eeaf0ca7d4bd674bf0717f1234bfd757f6fe
2025-05-16meta-evb: Add Andrew Jeffery to OWNERSAndrew Jeffery1-0/+1
Currently I'm more active in the project than Joel, so make sure we have someone looking at patches. Change-Id: I86cd7eba2a95c7ecd4052a2da48ce4551a8e8c97 Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-05-15meta-evb-fvp-base: SOL supportMohammed Javith Akthar M5-9/+45
This commit enables host serial console access in base fvp (BMC). In BMC, UART3(ttyAMA3) is mapped for SOL access. Testing: 1. Verified using RD-V3-R1 FVP + Base FVP (running OpenBMC firmware) 2. Connect host console with BMC via socat command > socat -x tcp:localhost:5005 tcp:localhost:5067 3. Update the host state as running in BMC in debug console > busctl set-property xyz.openbmc_project.State.Host /xyz/openbmc_project/state/host0 xyz.openbmc_project.State.Host CurrentHostState s xyz.openbmc_project.State.Host.HostState.Running 4. Log-in to BMC webui via https://127.0.0.1:4223 5. Accesss SOL console from Overview page Change-Id: I5d797b2b6f57a16d5b53f32c8aa422d102b55c56 Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
2025-04-08meta-evb: meta-evb-arm: Update README.mdJohn Chung1-18/+55
* Add IPMI Serial interface and usage * Update Neoverse FVP reference documents Signed-off-by: John Chung <john.chung@arm.com> Change-Id: I4abc56bb0ee1eb8f9cdb97743e04494230b911ce
2025-04-08meta-evb: meta-evb-arm: Enable IPMI HW Serial InterfaceJohn Chung5-1/+193
Enable IPMI Serial interface support in meta-evb-arm that allows to communicate with Arm Host FVP. Signed-off-by: John Chung <john.chung@arm.com> Change-Id: If991767caf57e7f2e7b13e21c66cd940908acf0f
2025-01-24meta-evb-arm: Configure mctp message timeoutJohn Chung2-0/+9
FVPs are running independently, there can be an issue with timeout. Increase mctp message timeout to avoid issue. Change-Id: I5ec074381c1d5c43c9e36f95852032a3c924fbe3 Signed-off-by: John Chung <john.chung@arm.com>
2025-01-24meta-evb-arm: enable dump log in BMCWebJohn Chung1-0/+3
Enable redfish-dump-log feature in BMCWeb to enable FaultLog. Change-Id: I9037f7fb371d7b6e65a8ef03ed8be6a1dc69c164 Signed-off-by: John Chung <john.chung@arm.com>
2025-01-09meta-evb-arm: Update to use mctp D-Bus v2.0 APIsThu Nguyen1-1/+1
The openEmbedded is updated to use the MCTP D-Bus APIs V2.0 from Code Construct. Update the MCTP API caller. Change-Id: Ia990d2a1d3b772668d5ebfa38415785945da752b Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com>
2025-01-08meta-evb: meta-evb-arm: add styhead to LAYERSERIES_COMPATJohn Chung4-2/+11
Update the meta-evb-arm recipe to support styhead and fix the build break caused by poky upgrade. Change-Id: I7457a9fb1083126270a93fe0553291f0c435c7db Signed-off-by: John Chung <john.chung@arm.com>
2024-12-20treewide: switch debug-tweaks to allow-root-loginPatrick Williams6-6/+6
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I2665e9e7e37242d546eafdb4d1c65dd0369ca635
2024-12-20treewide: add styhead to LAYERSERIES_COMPATPatrick Williams7-7/+7
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I8f74fcbb7bf66bb24fde1571ef09fac1095c7e59
2024-12-06styhead: update WORKDIR usageAndrew Geissler2-2/+2
The latest yocto release(styhead,5.1) has made a significant change[1] to the use of the WORKDIR parameter. This is not the complete change required but gets us going in the right direction. [1]: https://docs.yoctoproject.org/next/migration-guides/migration-5.1.html#workdir-changes Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I4f184b361be69e7704a0657a4a00cdad981aff8a
2024-08-29meta-evb: meta-evb-arm: Update README.mdAlexander Hansen1-16/+17
- update the diagram to visually align with ARM SBMR - update the SCP fw reference Change-Id: I6f1fe2472085721f9f5a97f81b9e358e726fc22a Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
2024-05-16meta-evb: meta-evb-arm: use kernel mctp stackAlexander Hansen5-3/+38
create mctp-local.service to - configure serial parameters for /dev/ttyAMA1 - create the link with 'mctp' command - configure local and remote EID for the link - setup the endpoint with mctpd Tested: pldm commands work and response is received from the MCP Change-Id: If924376c4775229c1701924e154894e4eaefa362 Signed-off-by: Alexander Hansen <alexander.hansen@9elements.com>
2024-05-06meta-evb: meta-evb-arm: Add new board FVP Base BoardLean Sheng Tan17-0/+557
This layer contains a reference implementation of OpenBMC for Armv-A Base RevC AEM FVP. Tested: - Build success - booted to bmc kernel shell Change-Id: Ie1b100a78232fb986377e3b58d637b97bbf64f42 Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-22treewide: remove meta-poky usagePatrick Williams4-4/+0
Upstream poky made a commit that adds an `/etc/motd` with a strong warning that meta-poky is not intended to be used for production purposes. There isn't anything we use directly from meta-poky anymore, so clean up all references to it. See poky commit a226865c8683398b5f58628ba2ec5aee1ee6c19d for additional context. We could potentially switch from using the `poky` subtree to picking up OECore directly, but right now it also provides us a qualified set of OECore + bitbake. Tested: Built yosemite4 and confirmed `motd` output is absent when SSHing in. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I9c08650d2278b3ba26794c009adad3e593767f58
2024-02-07meta-nuvoton: trusted-firmware-a: fix the version at v2.9.0Tim Lee1-0/+1
Currently, openbmc upstream already update tfa to version v2.10.0 For compatibling with latest openbmc, we need to fix the version at v2.9.0. Otherwise, we will meet this kind of build error from upstream. ERROR: No recipes in default available for: openbmc/meta-nuvoton/dynamic-layers/arm-layer/recipes-bsp/ trusted-firmware-a/trusted-firmware-a_2.9.%.bbappend Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: If652ee5478cc9c42e833dd4d2a203d7d5ebddca1
2024-02-06meta-evb: meta-evb-npcm845: fix build warning for this layerTim Lee1-0/+2
There is build warning as below: WARNING: No bb files in default matched BBFILE_PATTERN_evb-npcm845 Due to there is no any bb files in meta-evb-npcm845 layer now. Add this BBFILE_PATTERN_IGNORE_EMPTY to allow those layers has no bb files then clear this kind of WARNING messages. Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: Ic266ce77e9dff1e068f0c3813f0a0717b2a99c1e
2024-01-22meta-nuvoton: move all the other recipes from meta-evbTim Lee3-127/+0
Make clean meta-evb layer back to description of OpenBMC EVB layer. Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: Ia56fc7abfb46615c2150dd4e5acdff801e64a590
2023-12-12meta-nuvoton: adopt meta-evb-npcm845 from meta-evbTim Lee5-40/+1
Adopt meta-evb-npcm845 from meta-evb layer that make more clearer about the scope of evb layer's description. Tested: /openbmc$ . setup evb-npcm845 Common targets are: obmc-phosphor-image Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: Ib922057b5bce54b864f1c0ced1b132ea1e71fd91
2023-11-25treewide: add scarthgap to LAYERSERIES_COMPAT2.16.0-devPatrick Williams7-7/+7
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
2023-11-24treewide: add nanbield to LAYERSERIES_COMPATPatrick Williams7-7/+7
Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
2023-10-11treewide: clean up webui selectionPatrick Williams1-1/+0
The webui-vue package is now enabled by default. Clean up all the meta layers to clean up the explicit enablement. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I4895be56c70d2c8666dd96cec18d2c097f0c05a3
2023-07-05meta-evb-npcm845: enable sensors in dbus sensorsBrian Ma1-0/+5
There are temperature, adc, and fan sensors on EVB board, enable them. Change-Id: I533d4128e44ba8225356e80dcb74faa2fdaf07fb Signed-off-by: Brian Ma <chma0@nuvoton.com>
2023-06-28meta-evb-npcm845: host-postd: add postd daemon configurationTim Lee1-0/+1
Enable BIOS POST CODE functionality for Nuvoton BMC in postd. Need to add this configuration and fix daemon load failed. Due to default SNOOP_DEVICE is using Aspeed BMC. Failed log: lpcsnoop.service: Main process exited, code=exited ExecStart=/usr/bin/snoopd -b 1 -d /dev/aspeed-lpc-snoop0 (code=exited) Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: I3ec1c98787260e7a98f4a5135db0b9c5e23fc4af
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-01 12:41:05 +0300