diff options
Diffstat (limited to 'poky/documentation/dev-manual/changes.rst')
-rw-r--r-- | poky/documentation/dev-manual/changes.rst | 525 |
1 files changed, 0 insertions, 525 deletions
diff --git a/poky/documentation/dev-manual/changes.rst b/poky/documentation/dev-manual/changes.rst deleted file mode 100644 index 9db6ce010c..0000000000 --- a/poky/documentation/dev-manual/changes.rst +++ /dev/null @@ -1,525 +0,0 @@ -.. SPDX-License-Identifier: CC-BY-SA-2.0-UK - -Making Changes to the Yocto Project -*********************************** - -Because the Yocto Project is an open-source, community-based project, -you can effect changes to the project. This section presents procedures -that show you how to submit a defect against the project and how to -submit a change. - -Submitting a Defect Against the Yocto Project -============================================= - -Use the Yocto Project implementation of -`Bugzilla <https://www.bugzilla.org/about/>`__ to submit a defect (bug) -against the Yocto Project. For additional information on this -implementation of Bugzilla see the ":ref:`Yocto Project -Bugzilla <resources-bugtracker>`" section in the -Yocto Project Reference Manual. For more detail on any of the following -steps, see the Yocto Project -:yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>`. - -Use the following general steps to submit a bug: - -#. Open the Yocto Project implementation of :yocto_bugs:`Bugzilla <>`. - -#. Click "File a Bug" to enter a new bug. - -#. Choose the appropriate "Classification", "Product", and "Component" - for which the bug was found. Bugs for the Yocto Project fall into - one of several classifications, which in turn break down into - several products and components. For example, for a bug against the - ``meta-intel`` layer, you would choose "Build System, Metadata & - Runtime", "BSPs", and "bsps-meta-intel", respectively. - -#. Choose the "Version" of the Yocto Project for which you found the - bug (e.g. &DISTRO;). - -#. Determine and select the "Severity" of the bug. The severity - indicates how the bug impacted your work. - -#. Choose the "Hardware" that the bug impacts. - -#. Choose the "Architecture" that the bug impacts. - -#. Choose a "Documentation change" item for the bug. Fixing a bug might - or might not affect the Yocto Project documentation. If you are - unsure of the impact to the documentation, select "Don't Know". - -#. Provide a brief "Summary" of the bug. Try to limit your summary to - just a line or two and be sure to capture the essence of the bug. - -#. Provide a detailed "Description" of the bug. You should provide as - much detail as you can about the context, behavior, output, and so - forth that surrounds the bug. You can even attach supporting files - for output from logs by using the "Add an attachment" button. - -#. Click the "Submit Bug" button submit the bug. A new Bugzilla number - is assigned to the bug and the defect is logged in the bug tracking - system. - -Once you file a bug, the bug is processed by the Yocto Project Bug -Triage Team and further details concerning the bug are assigned (e.g. -priority and owner). You are the "Submitter" of the bug and any further -categorization, progress, or comments on the bug result in Bugzilla -sending you an automated email concerning the particular change or -progress to the bug. - -Submitting a Change to the Yocto Project -======================================== - -Contributions to the Yocto Project and OpenEmbedded are very welcome. -Because the system is extremely configurable and flexible, we recognize -that developers will want to extend, configure or optimize it for their -specific uses. - -The Yocto Project uses a mailing list and a patch-based workflow that is -similar to the Linux kernel but contains important differences. In -general, there is a mailing list through which you can submit patches. You -should send patches to the appropriate mailing list so that they can be -reviewed and merged by the appropriate maintainer. The specific mailing -list you need to use depends on the location of the code you are -changing. Each component (e.g. layer) should have a ``README`` file that -indicates where to send the changes and which process to follow. - -You can send the patch to the mailing list using whichever approach you -feel comfortable with to generate the patch. Once sent, the patch is -usually reviewed by the community at large. If somebody has concerns -with the patch, they will usually voice their concern over the mailing -list. If a patch does not receive any negative reviews, the maintainer -of the affected layer typically takes the patch, tests it, and then -based on successful testing, merges the patch. - -The "poky" repository, which is the Yocto Project's reference build -environment, is a hybrid repository that contains several individual -pieces (e.g. BitBake, Metadata, documentation, and so forth) built using -the combo-layer tool. The upstream location used for submitting changes -varies by component: - -- *Core Metadata:* Send your patch to the - :oe_lists:`openembedded-core </g/openembedded-core>` - mailing list. For example, a change to anything under the ``meta`` or - ``scripts`` directories should be sent to this mailing list. - -- *BitBake:* For changes to BitBake (i.e. anything under the - ``bitbake`` directory), send your patch to the - :oe_lists:`bitbake-devel </g/bitbake-devel>` - mailing list. - -- *"meta-\*" trees:* These trees contain Metadata. Use the - :yocto_lists:`poky </g/poky>` mailing list. - -- *Documentation*: For changes to the Yocto Project documentation, use the - :yocto_lists:`docs </g/docs>` mailing list. - -For changes to other layers hosted in the Yocto Project source -repositories (i.e. ``yoctoproject.org``) and tools use the -:yocto_lists:`Yocto Project </g/yocto/>` general mailing list. - -.. note:: - - Sometimes a layer's documentation specifies to use a particular - mailing list. If so, use that list. - -For additional recipes that do not fit into the core Metadata, you -should determine which layer the recipe should go into and submit the -change in the manner recommended by the documentation (e.g. the -``README`` file) supplied with the layer. If in doubt, please ask on the -Yocto general mailing list or on the openembedded-devel mailing list. - -You can also push a change upstream and request a maintainer to pull the -change into the component's upstream repository. You do this by pushing -to a contribution repository that is upstream. See the -":ref:`overview-manual/development-environment:git workflows and the yocto project`" -section in the Yocto Project Overview and Concepts Manual for additional -concepts on working in the Yocto Project development environment. - -Maintainers commonly use ``-next`` branches to test submissions prior to -merging patches. Thus, you can get an idea of the status of a patch based on -whether the patch has been merged into one of these branches. The commonly -used testing branches for OpenEmbedded-Core are as follows: - -- *openembedded-core "master-next" branch:* This branch is part of the - :oe_git:`openembedded-core </openembedded-core/>` repository and contains - proposed changes to the core metadata. - -- *poky "master-next" branch:* This branch is part of the - :yocto_git:`poky </poky/>` repository and combines proposed - changes to BitBake, the core metadata and the poky distro. - -Similarly, stable branches maintained by the project may have corresponding -``-next`` branches which collect proposed changes. For example, -``&DISTRO_NAME_NO_CAP;-next`` and ``&DISTRO_NAME_NO_CAP_MINUS_ONE;-next`` -branches in both the "openembdedded-core" and "poky" repositories. - -Other layers may have similar testing branches but there is no formal -requirement or standard for these so please check the documentation for the -layers you are contributing to. - -The following sections provide procedures for submitting a change. - -Preparing Changes for Submission --------------------------------- - -#. *Make Your Changes Locally:* Make your changes in your local Git - repository. You should make small, controlled, isolated changes. - Keeping changes small and isolated aids review, makes - merging/rebasing easier and keeps the change history clean should - anyone need to refer to it in future. - -#. *Stage Your Changes:* Stage your changes by using the ``git add`` - command on each file you changed. - -#. *Commit Your Changes:* Commit the change by using the ``git commit`` - command. Make sure your commit information follows standards by - following these accepted conventions: - - - Be sure to include a "Signed-off-by:" line in the same style as - required by the Linux kernel. This can be done by using the - ``git commit -s`` command. Adding this line signifies that you, - the submitter, have agreed to the Developer's Certificate of - Origin 1.1 as follows: - - .. code-block:: none - - Developer's Certificate of Origin 1.1 - - By making a contribution to this project, I certify that: - - (a) The contribution was created in whole or in part by me and I - have the right to submit it under the open source license - indicated in the file; or - - (b) The contribution is based upon previous work that, to the best - of my knowledge, is covered under an appropriate open source - license and I have the right under that license to submit that - work with modifications, whether created in whole or in part - by me, under the same open source license (unless I am - permitted to submit under a different license), as indicated - in the file; or - - (c) The contribution was provided directly to me by some other - person who certified (a), (b) or (c) and I have not modified - it. - - (d) I understand and agree that this project and the contribution - are public and that a record of the contribution (including all - personal information I submit with it, including my sign-off) is - maintained indefinitely and may be redistributed consistent with - this project or the open source license(s) involved. - - - Provide a single-line summary of the change and, if more - explanation is needed, provide more detail in the body of the - commit. This summary is typically viewable in the "shortlist" of - changes. Thus, providing something short and descriptive that - gives the reader a summary of the change is useful when viewing a - list of many commits. You should prefix this short description - with the recipe name (if changing a recipe), or else with the - short form path to the file being changed. - - - For the body of the commit message, provide detailed information - that describes what you changed, why you made the change, and the - approach you used. It might also be helpful if you mention how you - tested the change. Provide as much detail as you can in the body - of the commit message. - - .. note:: - - You do not need to provide a more detailed explanation of a - change if the change is minor to the point of the single line - summary providing all the information. - - - If the change addresses a specific bug or issue that is associated - with a bug-tracking ID, include a reference to that ID in your - detailed description. For example, the Yocto Project uses a - specific convention for bug references --- any commit that addresses - a specific bug should use the following form for the detailed - description. Be sure to use the actual bug-tracking ID from - Bugzilla for bug-id:: - - Fixes [YOCTO #bug-id] - - detailed description of change - -Using Email to Submit a Patch ------------------------------ - -Depending on the components changed, you need to submit the email to a -specific mailing list. For some guidance on which mailing list to use, -see the -:ref:`list <dev-manual/changes:submitting a change to the yocto project>` -at the beginning of this section. For a description of all the available -mailing lists, see the ":ref:`Mailing Lists <resources-mailinglist>`" section in the -Yocto Project Reference Manual. - -Here is the general procedure on how to submit a patch through email -without using the scripts once the steps in -:ref:`dev-manual/changes:preparing changes for submission` have been followed: - -#. *Format the Commit:* Format the commit into an email message. To - format commits, use the ``git format-patch`` command. When you - provide the command, you must include a revision list or a number of - patches as part of the command. For example, either of these two - commands takes your most recent single commit and formats it as an - email message in the current directory:: - - $ git format-patch -1 - - or :: - - $ git format-patch HEAD~ - - After the command is run, the current directory contains a numbered - ``.patch`` file for the commit. - - If you provide several commits as part of the command, the - ``git format-patch`` command produces a series of numbered files in - the current directory – one for each commit. If you have more than - one patch, you should also use the ``--cover`` option with the - command, which generates a cover letter as the first "patch" in the - series. You can then edit the cover letter to provide a description - for the series of patches. For information on the - ``git format-patch`` command, see ``GIT_FORMAT_PATCH(1)`` displayed - using the ``man git-format-patch`` command. - - .. note:: - - If you are or will be a frequent contributor to the Yocto Project - or to OpenEmbedded, you might consider requesting a contrib area - and the necessary associated rights. - -#. *Send the patches via email:* Send the patches to the recipients and - relevant mailing lists by using the ``git send-email`` command. - - .. note:: - - In order to use ``git send-email``, you must have the proper Git packages - installed on your host. - For Ubuntu, Debian, and Fedora the package is ``git-email``. - - The ``git send-email`` command sends email by using a local or remote - Mail Transport Agent (MTA) such as ``msmtp``, ``sendmail``, or - through a direct ``smtp`` configuration in your Git ``~/.gitconfig`` - file. If you are submitting patches through email only, it is very - important that you submit them without any whitespace or HTML - formatting that either you or your mailer introduces. The maintainer - that receives your patches needs to be able to save and apply them - directly from your emails. A good way to verify that what you are - sending will be applicable by the maintainer is to do a dry run and - send them to yourself and then save and apply them as the maintainer - would. - - The ``git send-email`` command is the preferred method for sending - your patches using email since there is no risk of compromising - whitespace in the body of the message, which can occur when you use - your own mail client. The command also has several options that let - you specify recipients and perform further editing of the email - message. For information on how to use the ``git send-email`` - command, see ``GIT-SEND-EMAIL(1)`` displayed using the - ``man git-send-email`` command. - -The Yocto Project uses a `Patchwork instance <https://patchwork.yoctoproject.org/>`__ -to track the status of patches submitted to the various mailing lists and to -support automated patch testing. Each submitted patch is checked for common -mistakes and deviations from the expected patch format and submitters are -notified by patchtest if such mistakes are found. This process helps to -reduce the burden of patch review on maintainers. - -.. note:: - - This system is imperfect and changes can sometimes get lost in the flow. - Asking about the status of a patch or change is reasonable if the change - has been idle for a while with no feedback. - -Using Scripts to Push a Change Upstream and Request a Pull ----------------------------------------------------------- - -For larger patch series it is preferable to send a pull request which not -only includes the patch but also a pointer to a branch that can be pulled -from. This involves making a local branch for your changes, pushing this -branch to an accessible repository and then using the ``create-pull-request`` -and ``send-pull-request`` scripts from openembedded-core to create and send a -patch series with a link to the branch for review. - -Follow this procedure to push a change to an upstream "contrib" Git -repository once the steps in :ref:`dev-manual/changes:preparing changes for submission` have -been followed: - -.. note:: - - You can find general Git information on how to push a change upstream - in the - `Git Community Book <https://git-scm.com/book/en/v2/Distributed-Git-Distributed-Workflows>`__. - -#. *Push Your Commits to a "Contrib" Upstream:* If you have arranged for - permissions to push to an upstream contrib repository, push the - change to that repository:: - - $ git push upstream_remote_repo local_branch_name - - For example, suppose you have permissions to push - into the upstream ``meta-intel-contrib`` repository and you are - working in a local branch named `your_name`\ ``/README``. The following - command pushes your local commits to the ``meta-intel-contrib`` - upstream repository and puts the commit in a branch named - `your_name`\ ``/README``:: - - $ git push meta-intel-contrib your_name/README - -#. *Determine Who to Notify:* Determine the maintainer or the mailing - list that you need to notify for the change. - - Before submitting any change, you need to be sure who the maintainer - is or what mailing list that you need to notify. Use either these - methods to find out: - - - *Maintenance File:* Examine the ``maintainers.inc`` file, which is - located in the :term:`Source Directory` at - ``meta/conf/distro/include``, to see who is responsible for code. - - - *Search by File:* Using :ref:`overview-manual/development-environment:git`, you can - enter the following command to bring up a short list of all - commits against a specific file:: - - git shortlog -- filename - - Just provide the name of the file for which you are interested. The - information returned is not ordered by history but does include a - list of everyone who has committed grouped by name. From the list, - you can see who is responsible for the bulk of the changes against - the file. - - - *Examine the List of Mailing Lists:* For a list of the Yocto - Project and related mailing lists, see the ":ref:`Mailing - lists <resources-mailinglist>`" section in - the Yocto Project Reference Manual. - -#. *Make a Pull Request:* Notify the maintainer or the mailing list that - you have pushed a change by making a pull request. - - The Yocto Project provides two scripts that conveniently let you - generate and send pull requests to the Yocto Project. These scripts - are ``create-pull-request`` and ``send-pull-request``. You can find - these scripts in the ``scripts`` directory within the - :term:`Source Directory` (e.g. - ``poky/scripts``). - - Using these scripts correctly formats the requests without - introducing any whitespace or HTML formatting. The maintainer that - receives your patches either directly or through the mailing list - needs to be able to save and apply them directly from your emails. - Using these scripts is the preferred method for sending patches. - - First, create the pull request. For example, the following command - runs the script, specifies the upstream repository in the contrib - directory into which you pushed the change, and provides a subject - line in the created patch files:: - - $ poky/scripts/create-pull-request -u meta-intel-contrib -s "Updated Manual Section Reference in README" - - Running this script forms ``*.patch`` files in a folder named - ``pull-``\ `PID` in the current directory. One of the patch files is a - cover letter. - - Before running the ``send-pull-request`` script, you must edit the - cover letter patch to insert information about your change. After - editing the cover letter, send the pull request. For example, the - following command runs the script and specifies the patch directory - and email address. In this example, the email address is a mailing - list:: - - $ poky/scripts/send-pull-request -p ~/meta-intel/pull-10565 -t meta-intel@lists.yoctoproject.org - - You need to follow the prompts as the script is interactive. - - .. note:: - - For help on using these scripts, simply provide the ``-h`` - argument as follows:: - - $ poky/scripts/create-pull-request -h - $ poky/scripts/send-pull-request -h - -Responding to Patch Review --------------------------- - -You may get feedback on your submitted patches from other community members -or from the automated patchtest service. If issues are identified in your -patch then it is usually necessary to address these before the patch will be -accepted into the project. In this case you should amend the patch according -to the feedback and submit an updated version to the relevant mailing list, -copying in the reviewers who provided feedback to the previous version of the -patch. - -The patch should be amended using ``git commit --amend`` or perhaps ``git -rebase`` for more expert git users. You should also modify the ``[PATCH]`` -tag in the email subject line when sending the revised patch to mark the new -iteration as ``[PATCH v2]``, ``[PATCH v3]``, etc as appropriate. This can be -done by passing the ``-v`` argument to ``git format-patch`` with a version -number. - -Lastly please ensure that you also test your revised changes. In particular -please don't just edit the patch file written out by ``git format-patch`` and -resend it. - -Submitting Changes to Stable Release Branches ---------------------------------------------- - -The process for proposing changes to a Yocto Project stable branch differs -from the steps described above. Changes to a stable branch must address -identified bugs or CVEs and should be made carefully in order to avoid the -risk of introducing new bugs or breaking backwards compatibility. Typically -bug fixes must already be accepted into the master branch before they can be -backported to a stable branch unless the bug in question does not affect the -master branch or the fix on the master branch is unsuitable for backporting. - -The list of stable branches along with the status and maintainer for each -branch can be obtained from the -:yocto_wiki:`Releases wiki page </Releases>`. - -.. note:: - - Changes will not typically be accepted for branches which are marked as - End-Of-Life (EOL). - -With this in mind, the steps to submit a change for a stable branch are as -follows: - -#. *Identify the bug or CVE to be fixed:* This information should be - collected so that it can be included in your submission. - - See :ref:`dev-manual/vulnerabilities:checking for vulnerabilities` - for details about CVE tracking. - -#. *Check if the fix is already present in the master branch:* This will - result in the most straightforward path into the stable branch for the - fix. - - #. *If the fix is present in the master branch --- submit a backport request - by email:* You should send an email to the relevant stable branch - maintainer and the mailing list with details of the bug or CVE to be - fixed, the commit hash on the master branch that fixes the issue and - the stable branches which you would like this fix to be backported to. - - #. *If the fix is not present in the master branch --- submit the fix to the - master branch first:* This will ensure that the fix passes through the - project's usual patch review and test processes before being accepted. - It will also ensure that bugs are not left unresolved in the master - branch itself. Once the fix is accepted in the master branch a backport - request can be submitted as above. - - #. *If the fix is unsuitable for the master branch --- submit a patch - directly for the stable branch:* This method should be considered as a - last resort. It is typically necessary when the master branch is using - a newer version of the software which includes an upstream fix for the - issue or when the issue has been fixed on the master branch in a way - that introduces backwards incompatible changes. In this case follow the - steps in :ref:`dev-manual/changes:preparing changes for submission` and - :ref:`dev-manual/changes:using email to submit a patch` but modify the subject header of your patch - email to include the name of the stable branch which you are - targetting. This can be done using the ``--subject-prefix`` argument to - ``git format-patch``, for example to submit a patch to the dunfell - branch use - ``git format-patch --subject-prefix='&DISTRO_NAME_NO_CAP_MINUS_ONE;][PATCH' ...``. - |