diff options
Diffstat (limited to 'poky/documentation/migration-guides/migration-1.4.rst')
-rw-r--r-- | poky/documentation/migration-guides/migration-1.4.rst | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/poky/documentation/migration-guides/migration-1.4.rst b/poky/documentation/migration-guides/migration-1.4.rst new file mode 100644 index 000000000..3f980915c --- /dev/null +++ b/poky/documentation/migration-guides/migration-1.4.rst @@ -0,0 +1,235 @@ +Release 1.4 (dylan) +=================== + +This section provides migration information for moving to the Yocto +Project 1.4 Release (codename "dylan") from the prior release. + +.. _migration-1.4-bitbake: + +BitBake +------- + +Differences include the following: + +- *Comment Continuation:* If a comment ends with a line continuation + (\\) character, then the next line must also be a comment. Any + instance where this is not the case, now triggers a warning. You must + either remove the continuation character, or be sure the next line is + a comment. + +- *Package Name Overrides:* The runtime package specific variables + :term:`RDEPENDS`, + :term:`RRECOMMENDS`, + :term:`RSUGGESTS`, + :term:`RPROVIDES`, + :term:`RCONFLICTS`, + :term:`RREPLACES`, :term:`FILES`, + :term:`ALLOW_EMPTY`, and the pre, post, install, + and uninstall script functions ``pkg_preinst``, ``pkg_postinst``, + ``pkg_prerm``, and ``pkg_postrm`` should always have a package name + override. For example, use ``RDEPENDS_${PN}`` for the main package + instead of :term:`RDEPENDS`. BitBake uses more strict checks when it + parses recipes. + +.. _migration-1.4-build-behavior: + +Build Behavior +-------------- + +Differences include the following: + +- *Shared State Code:* The shared state code has been optimized to + avoid running unnecessary tasks. For example, the following no longer + populates the target sysroot since that is not necessary:: + + $ bitbake -c rootfs some-image + + Instead, the system just needs to extract the + output package contents, re-create the packages, and construct the + root filesystem. This change is unlikely to cause any problems unless + you have missing declared dependencies. + +- *Scanning Directory Names:* When scanning for files in + :term:`SRC_URI`, the build system now uses + :term:`FILESOVERRIDES` instead of + :term:`OVERRIDES` for the directory names. In + general, the values previously in :term:`OVERRIDES` are now in + :term:`FILESOVERRIDES` as well. However, if you relied upon an additional + value you previously added to :term:`OVERRIDES`, you might now need to + add it to :term:`FILESOVERRIDES` unless you are already adding it through + the :term:`MACHINEOVERRIDES` or + :term:`DISTROOVERRIDES` variables, as + appropriate. For more related changes, see the + ":ref:`migration-guides/migration-1.4:variables`" section. + +.. _migration-1.4-proxies-and-fetching-source: + +Proxies and Fetching Source +--------------------------- + +A new ``oe-git-proxy`` script has been added to replace previous methods +of handling proxies and fetching source from Git. See the +``meta-yocto/conf/site.conf.sample`` file for information on how to use +this script. + +.. _migration-1.4-custom-interfaces-file-netbase-change: + +Custom Interfaces File (netbase change) +--------------------------------------- + +If you have created your own custom ``etc/network/interfaces`` file by +creating an append file for the ``netbase`` recipe, you now need to +create an append file for the ``init-ifupdown`` recipe instead, which +you can find in the :term:`Source Directory` at +``meta/recipes-core/init-ifupdown``. For information on how to use +append files, see the +":ref:`dev-manual/common-tasks:using .bbappend files in your layer`" +section in the Yocto Project Development Tasks Manual. + +.. _migration-1.4-remote-debugging: + +Remote Debugging +---------------- + +Support for remote debugging with the Eclipse IDE is now separated into +an image feature (``eclipse-debug``) that corresponds to the +``packagegroup-core-eclipse-debug`` package group. Previously, the +debugging feature was included through the ``tools-debug`` image +feature, which corresponds to the ``packagegroup-core-tools-debug`` +package group. + +.. _migration-1.4-variables: + +Variables +--------- + +The following variables have changed: + +- :term:`SANITY_TESTED_DISTROS`: This variable now uses a distribution + ID, which is composed of the host distributor ID followed by the + release. Previously, + :term:`SANITY_TESTED_DISTROS` was + composed of the description field. For example, "Ubuntu 12.10" + becomes "Ubuntu-12.10". You do not need to worry about this change if + you are not specifically setting this variable, or if you are + specifically setting it to "". + +- :term:`SRC_URI`: The ``${``\ :term:`PN`\ ``}``, + ``${``\ :term:`PF`\ ``}``, + ``${``\ :term:`P`\ ``}``, and ``FILE_DIRNAME`` directories + have been dropped from the default value of the + :term:`FILESPATH` variable, which is used as the + search path for finding files referred to in + :term:`SRC_URI`. If you have a recipe that relied upon + these directories, which would be unusual, then you will need to add + the appropriate paths within the recipe or, alternatively, rearrange + the files. The most common locations are still covered by ``${``\ :term:`BP`\ ``}``, + ``${``\ :term:`BPN`\ ``}``, and "files", which all remain in the default value of + :term:`FILESPATH`. + +.. _migration-target-package-management-with-rpm: + +Target Package Management with RPM +---------------------------------- + +If runtime package management is enabled and the RPM backend is +selected, Smart is now installed for package download, dependency +resolution, and upgrades instead of Zypper. For more information on how +to use Smart, run the following command on the target:: + + smart --help + +.. _migration-1.4-recipes-moved: + +Recipes Moved +------------- + +The following recipes were moved from their previous locations because +they are no longer used by anything in the OpenEmbedded-Core: + +- ``clutter-box2d``: Now resides in the ``meta-oe`` layer. + +- ``evolution-data-server``: Now resides in the ``meta-gnome`` layer. + +- ``gthumb``: Now resides in the ``meta-gnome`` layer. + +- ``gtkhtml2``: Now resides in the ``meta-oe`` layer. + +- ``gupnp``: Now resides in the ``meta-multimedia`` layer. + +- ``gypsy``: Now resides in the ``meta-oe`` layer. + +- ``libcanberra``: Now resides in the ``meta-gnome`` layer. + +- ``libgdata``: Now resides in the ``meta-gnome`` layer. + +- ``libmusicbrainz``: Now resides in the ``meta-multimedia`` layer. + +- ``metacity``: Now resides in the ``meta-gnome`` layer. + +- ``polkit``: Now resides in the ``meta-oe`` layer. + +- ``zeroconf``: Now resides in the ``meta-networking`` layer. + +.. _migration-1.4-removals-and-renames: + +Removals and Renames +-------------------- + +The following list shows what has been removed or renamed: + +- ``evieext``: Removed because it has been removed from ``xserver`` + since 2008. + +- *Gtk+ DirectFB:* Removed support because upstream Gtk+ no longer + supports it as of version 2.18. + +- ``libxfontcache / xfontcacheproto``: Removed because they were + removed from the Xorg server in 2008. + +- ``libxp / libxprintapputil / libxprintutil / printproto``: Removed + because the XPrint server was removed from Xorg in 2008. + +- ``libxtrap / xtrapproto``: Removed because their functionality was + broken upstream. + +- *linux-yocto 3.0 kernel:* Removed with linux-yocto 3.8 kernel being + added. The linux-yocto 3.2 and linux-yocto 3.4 kernels remain as part + of the release. + +- ``lsbsetup``: Removed with functionality now provided by + ``lsbtest``. + +- ``matchbox-stroke``: Removed because it was never more than a + proof-of-concept. + +- ``matchbox-wm-2 / matchbox-theme-sato-2``: Removed because they are + not maintained. However, ``matchbox-wm`` and ``matchbox-theme-sato`` + are still provided. + +- ``mesa-dri``: Renamed to ``mesa``. + +- ``mesa-xlib``: Removed because it was no longer useful. + +- ``mutter``: Removed because nothing ever uses it and the recipe is + very old. + +- ``orinoco-conf``: Removed because it has become obsolete. + +- ``update-modules``: Removed because it is no longer used. The + kernel module ``postinstall`` and ``postrm`` scripts can now do the + same task without the use of this script. + +- ``web``: Removed because it is not maintained. Superseded by + ``web-webkit``. + +- ``xf86bigfontproto``: Removed because upstream it has been disabled + by default since 2007. Nothing uses ``xf86bigfontproto``. + +- ``xf86rushproto``: Removed because its dependency in ``xserver`` + was spurious and it was removed in 2005. + +- ``zypper / libzypp / sat-solver``: Removed and been functionally + replaced with Smart (``python-smartpm``) when RPM packaging is used + and package management is enabled on the target. + |