meta-raspberrypi: sumo refresh 05f21adb99..ade31d6d01

Update meta-raspberrypi to sumo HEAD.

Andrei Gherzan (4):
      raspberrypi3-64.conf: Include cm3 dtb
      linux-raspberrypi: Update to v4.14.58
      rpi-base.inc: Split overlays and dtbs from KERNEL_DEVICETREE
      raspberrypi3-64.conf: Define only the dtb files that are available for arch64

Anton Gerasimov (3):
      rpi-base.inc: install at86rf233 overlay
      rpi-config: load at86rf233 overlay
      docs: document support for 802.15.4 hat

Eduardo Abinader (1):
      config_git.bb: Remove extra space

Hugo Hromic (5):
      formfactor: use `rpi` instead of `raspberrypi` to apply to all rpi machines
      meta-raspberrypi: use `_%` suffix instead of specific versions for bbappends
      pi-bluetooth: use `_git` suffix in recipe filename
      meta-raspberrypi: use generic licenses in ${COMMON_LICENSE_DIR} from Poky
      wiringpi: use lower-case in recipe directory name

Khem Raj (2):
      firmware: Update to 20180619 release
      linux-raspberrypi: Update to 4.14.52+

Martin Jansa (3):
      sdcard_image-rpi.bbclass: copy the DTB files with canonical name
      sdcard_image-rpi: add dependency on rpi-u-boot-scr
      sdcard_image-rpi.bbclass: use 4 spaces for indentation instead of mix of tabs and spaces

Steve Pavao (1):
      rpi-hwup-image.bb: Modified the warning message in do_image_prepend()

Change-Id: If6ee02907ad0f08816eb4d5dad9c92f0d93e252c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

19 files changed, 152 insertions, 155 deletions

diff --git a/meta-raspberrypi/classes/sdcard_image-rpi.bbclass b/meta-raspberrypi/classes/sdcard_image-rpi.bbclass
index f03595c2c..e7c34c63f 100644
--- a/meta-raspberrypi/classes/sdcard_image-rpi.bbclass
+++ b/meta-raspberrypi/classes/sdcard_image-rpi.bbclass
@@ -50,13 +50,14 @@ SDIMG_ROOTFS_TYPE ?= "ext3"
 SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${SDIMG_ROOTFS_TYPE}"
 
 do_image_rpi_sdimg[depends] = " \
-			parted-native:do_populate_sysroot \
-			mtools-native:do_populate_sysroot \
-			dosfstools-native:do_populate_sysroot \
-			virtual/kernel:do_deploy \
-			${IMAGE_BOOTLOADER}:do_deploy \
-			${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
-			"
+    parted-native:do_populate_sysroot \
+    mtools-native:do_populate_sysroot \
+    dosfstools-native:do_populate_sysroot \
+    virtual/kernel:do_deploy \
+    ${IMAGE_BOOTLOADER}:do_deploy \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'rpi-u-boot-scr:do_deploy', '',d)} \
+"
 
 do_image_rpi_sdimg[recrdeps] = "do_build"
 
@@ -79,6 +80,7 @@ SDIMG_LINK_VFAT = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vfat"
 
 def split_overlays(d, out, ver=None):
     dts = d.getVar("KERNEL_DEVICETREE")
+    # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' (4.1.x) or by '.dtbo' (4.4.9+) string and will be put in a dedicated folder
     if out:
         overlays = oe.utils.str_filter_out('\S+\-overlay\.dtb$', dts, d)
         overlays = oe.utils.str_filter_out('\S+\.dtbo$', overlays, d)
@@ -90,114 +92,107 @@ def split_overlays(d, out, ver=None):
 
 IMAGE_CMD_rpi-sdimg () {
 
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE)
-
-	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
-
-	# Check if we are building with device tree support
-	DTS="${KERNEL_DEVICETREE}"
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG} set 1 boot on
-	# Create rootfs partition to the end of disk
-	parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
-	parted ${SDIMG} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
-	if test -n "${DTS}"; then
-		# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' (4.1.x) or by '.dtbo' (4.4.9+) string and will be put in a dedicated folder
-		DT_OVERLAYS="${@split_overlays(d, 0)}"
-		DT_ROOT="${@split_overlays(d, 1)}"
-
-		# Copy board device trees to root folder
-		for DTB in $DT_ROOT; do
-			DTB_BASE_NAME=`basename ${DTB} .dtb`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
-		done
-
-		# Copy device tree overlays to dedicated folder
-		mmd -i ${WORKDIR}/boot.img overlays
-		for DTB in $DT_OVERLAYS; do
-				DTB_EXT=${DTB##*.}
-				DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
-		done
-	fi
-        if [ "${RPI_USE_U_BOOT}" = "1" ]; then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE}
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-	else
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
-	fi
-
-	if [ -n ${FATPAYLOAD} ] ; then
-		echo "Copying payload into VFAT"
-		for entry in ${FATPAYLOAD} ; do
-				# add the || true to stop aborting on vfat issues like not supporting .~lock files
-				mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
-		done
-	fi
-
-	# Add stamp file
-	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
-
-        # Deploy vfat partition (for u-boot case only)
-        if [ "${RPI_USE_U_BOOT}" = "1" ]; then
-                cp ${WORKDIR}/boot.img ${IMGDEPLOYDIR}/${SDIMG_VFAT}
-                ln -sf ${SDIMG_VFAT} ${SDIMG_LINK_VFAT}
-        fi
-
-	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
-	fi
-
-	# Optionally apply compression
-	case "${SDIMG_COMPRESSION}" in
-	"gzip")
-		gzip -k9 "${SDIMG}"
-		;;
-	"bzip2")
-		bzip2 -k9 "${SDIMG}"
-		;;
-	"xz")
-		xz -k "${SDIMG}"
-		;;
-	esac
+    # Align partitions
+    BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+    BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+    SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE)
+
+    echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
+
+    # Check if we are building with device tree support
+    DTS="${KERNEL_DEVICETREE}"
+
+    # Initialize sdcard image file
+    dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
+
+    # Create partition table
+    parted -s ${SDIMG} mklabel msdos
+    # Create boot partition and mark it as bootable
+    parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+    parted -s ${SDIMG} set 1 boot on
+    # Create rootfs partition to the end of disk
+    parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
+    parted ${SDIMG} print
+
+    # Create a vfat image with boot files
+    BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+    rm -f ${WORKDIR}/boot.img
+    mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+    mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
+    if test -n "${DTS}"; then
+        # Copy board device trees to root folder
+        for dtbf in ${@split_overlays(d, True)}; do
+            dtb=`basename $dtbf`
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::$dtb
+        done
+
+        # Copy device tree overlays to dedicated folder
+        mmd -i ${WORKDIR}/boot.img overlays
+        for dtbf in ${@split_overlays(d, False)}; do
+            dtb=`basename $dtbf`
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::overlays/$dtb
+        done
+    fi
+    if [ "${RPI_USE_U_BOOT}" = "1" ]; then
+        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE}
+        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
+        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+    else
+        mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
+    fi
+
+    if [ -n ${FATPAYLOAD} ] ; then
+        echo "Copying payload into VFAT"
+        for entry in ${FATPAYLOAD} ; do
+            # add the || true to stop aborting on vfat issues like not supporting .~lock files
+            mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
+        done
+    fi
+
+    # Add stamp file
+    echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
+    mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
+
+    # Deploy vfat partition (for u-boot case only)
+    if [ "${RPI_USE_U_BOOT}" = "1" ]; then
+        cp ${WORKDIR}/boot.img ${IMGDEPLOYDIR}/${SDIMG_VFAT}
+        ln -sf ${SDIMG_VFAT} ${SDIMG_LINK_VFAT}
+    fi
+
+    # Burn Partitions
+    dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
+    # If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+    if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
+    then
+        xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
+    else
+        dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
+    fi
+
+    # Optionally apply compression
+    case "${SDIMG_COMPRESSION}" in
+    "gzip")
+        gzip -k9 "${SDIMG}"
+        ;;
+    "bzip2")
+        bzip2 -k9 "${SDIMG}"
+        ;;
+    "xz")
+        xz -k "${SDIMG}"
+        ;;
+    esac
 }
 
 ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; "
 
 rpi_generate_sysctl_config() {
-	# systemd sysctl config
-	test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \
-		echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf
-
-	# sysv sysctl config
-	IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf"
-	test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \
-		sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF}
-	echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF}
+    # systemd sysctl config
+    test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \
+        echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf
+
+    # sysv sysctl config
+    IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf"
+    test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \
+        sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF}
+    echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF}
 }
diff --git a/meta-raspberrypi/conf/machine/include/rpi-base.inc b/meta-raspberrypi/conf/machine/include/rpi-base.inc
index d76495a68..2af15886b 100644
--- a/meta-raspberrypi/conf/machine/include/rpi-base.inc
+++ b/meta-raspberrypi/conf/machine/include/rpi-base.inc
@@ -14,16 +14,7 @@ XSERVER = " \
     ${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "xf86-video-modesetting", "xf86-video-fbdev", d)} \
     "
 
-KERNEL_DEVICETREE ?= " \
-    bcm2708-rpi-0-w.dtb \
-    bcm2708-rpi-b.dtb \
-    bcm2708-rpi-b-plus.dtb \
-    bcm2709-rpi-2-b.dtb \
-    bcm2710-rpi-3-b.dtb \
-    bcm2710-rpi-3-b-plus.dtb \
-    bcm2708-rpi-cm.dtb \
-    bcm2710-rpi-cm3.dtb \
-    \
+RPI_KERNEL_DEVICETREE_OVERLAYS ?= " \
     overlays/dwc2.dtbo \
     overlays/hifiberry-amp.dtbo \
     overlays/hifiberry-dac.dtbo \
@@ -43,6 +34,23 @@ KERNEL_DEVICETREE ?= " \
     overlays/pi3-disable-bt.dtbo \
     overlays/pi3-miniuart-bt.dtbo \
     overlays/vc4-kms-v3d.dtbo \
+    overlays/at86rf233.dtbo \
+    "
+
+RPI_KERNEL_DEVICETREE ?= " \
+    bcm2708-rpi-0-w.dtb \
+    bcm2708-rpi-b.dtb \
+    bcm2708-rpi-b-plus.dtb \
+    bcm2709-rpi-2-b.dtb \
+    bcm2710-rpi-3-b.dtb \
+    bcm2710-rpi-3-b-plus.dtb \
+    bcm2708-rpi-cm.dtb \
+    bcm2710-rpi-cm3.dtb \
+    "
+
+KERNEL_DEVICETREE ?= " \
+    ${RPI_KERNEL_DEVICETREE} \
+    ${RPI_KERNEL_DEVICETREE_OVERLAYS} \
     "
 
 # By default:
diff --git a/meta-raspberrypi/conf/machine/raspberrypi3-64.conf b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf
index 5163320da..fb21b122c 100644
--- a/meta-raspberrypi/conf/machine/raspberrypi3-64.conf
+++ b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf
@@ -14,30 +14,10 @@ MACHINE_EXTRA_RRECOMMENDS += "\
 require conf/machine/include/arm/arch-armv8.inc
 include conf/machine/include/rpi-base.inc
 
-KERNEL_DEVICETREE = " \
+RPI_KERNEL_DEVICETREE = " \
     broadcom/bcm2710-rpi-3-b.dtb \
     broadcom/bcm2710-rpi-3-b-plus.dtb \
     broadcom/bcm2837-rpi-3-b.dtb \
-    \
-    overlays/hifiberry-amp.dtbo \
-    overlays/hifiberry-dac.dtbo \
-    overlays/hifiberry-dacplus.dtbo \
-    overlays/hifiberry-digi.dtbo \
-    overlays/i2c-rtc.dtbo \
-    overlays/iqaudio-dac.dtbo \
-    overlays/iqaudio-dacplus.dtbo \
-    overlays/lirc-rpi.dtbo \
-    overlays/pitft22.dtbo \
-    overlays/pitft28-resistive.dtbo \
-    overlays/pitft35-resistive.dtbo \
-    overlays/pps-gpio.dtbo \
-    overlays/rpi-ft5406.dtbo \
-    overlays/w1-gpio.dtbo \
-    overlays/w1-gpio-pullup.dtbo \
-    overlays/pi3-disable-bt.dtbo \
-    overlays/pi3-miniuart-bt.dtbo \
-    overlays/vc4-kms-v3d.dtbo \
-    overlays/vc4-fkms-v3d.dtbo \
     "
 
 SERIAL_CONSOLE ?= "115200 ttyS0"
diff --git a/meta-raspberrypi/docs/extra-build-config.md b/meta-raspberrypi/docs/extra-build-config.md
index 806c23803..04314aa3d 100644
--- a/meta-raspberrypi/docs/extra-build-config.md
+++ b/meta-raspberrypi/docs/extra-build-config.md
@@ -237,6 +237,14 @@ local.conf:
 
     ENABLE_DWC2_PERIPHERAL = "1"
 
+## Enable Openlabs 802.15.4 radio module
+
+When using device tree kernels, set this variable to enable the 802.15.4 hat:
+
+    ENABLE_AT86RF = "1"
+
+See: <https://openlabs.co/OSHW/Raspberry-Pi-802.15.4-radio>
+
 ## Manual additions to config.txt
 
 The `RPI_EXTRA_CONFIG` variable can be used to manually add additional lines to
diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
index e0b2b58bc..a85c91630 100644
--- a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -3,7 +3,7 @@ DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
                the ARM core is initialised. It can be used to set various \
                system configuration parameters."
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
 COMPATIBLE_MACHINE = "^rpi$"
 
@@ -177,7 +177,13 @@ do_deploy() {
         echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-    
+
+    # AT86RF23X support
+    if [ "${ENABLE_AT86RF}" = "1" ]; then
+        echo "# Enable AT86RF23X" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
     # Append extra config if the user has provided any
     echo "${RPI_EXTRA_CONFIG}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
diff --git a/meta-raspberrypi/recipes-bsp/common/firmware.inc b/meta-raspberrypi/recipes-bsp/common/firmware.inc
index d564a49ab..26cafb746 100644
--- a/meta-raspberrypi/recipes-bsp/common/firmware.inc
+++ b/meta-raspberrypi/recipes-bsp/common/firmware.inc
@@ -1,10 +1,10 @@
-RPIFW_DATE ?= "20180417"
-SRCREV ?= "5db8e4e1c63178e200d6fbea23ed4a9bf4656658"
+RPIFW_DATE ?= "20180619"
+SRCREV ?= "748fb17992426bb29d99224b93cb962fefbdc833"
 RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/${SRCREV}.tar.gz"
 RPIFW_S ?= "${WORKDIR}/firmware-${SRCREV}"
 
 SRC_URI = "${RPIFW_SRC_URI}"
-SRC_URI[md5sum] = "6bce52f22a7a005a9bcdb9912b132590"
-SRC_URI[sha256sum] = "84568c4e7f5b0deee4cd76e7c0b48315885f983d6131d8148ef8af8438328a36"
+SRC_URI[md5sum] = "02edb854e9b72499225f3f93d322fe12"
+SRC_URI[sha256sum] = "07b2dc9d0779e15666e3ab596387e18cefc265d863c4bf6f8a0572b58a4fb793"
 
 PV = "${RPIFW_DATE}"
diff --git a/meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi/machconfig b/meta-raspberrypi/recipes-bsp/formfactor/formfactor/rpi/machconfig
index bef4ce3c9..bef4ce3c9 100644
--- a/meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi/machconfig
+++ b/meta-raspberrypi/recipes-bsp/formfactor/formfactor/rpi/machconfig
diff --git a/meta-raspberrypi/recipes-bsp/formfactor/formfactor_0.0.bbappend b/meta-raspberrypi/recipes-bsp/formfactor/formfactor_%.bbappend
index 72d991c7e..72d991c7e 100644
--- a/meta-raspberrypi/recipes-bsp/formfactor/formfactor_0.0.bbappend
+++ b/meta-raspberrypi/recipes-bsp/formfactor/formfactor_%.bbappend
diff --git a/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb b/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
index 0106ac3ff..593fc903e 100644
--- a/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
+++ b/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
@@ -1,6 +1,6 @@
 SUMMARY = "U-boot boot scripts for Raspberry Pi"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 COMPATIBLE_MACHINE = "^rpi$"
 
 DEPENDS = "u-boot-mkimage-native"
diff --git a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth.bb b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_git.bb
index e185f25e2..e185f25e2 100644
--- a/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth.bb
+++ b/meta-raspberrypi/recipes-connectivity/pi-bluetooth/pi-bluetooth_git.bb
diff --git a/meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb b/meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb
index d2371ad25..86e9b6daf 100644
--- a/meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb
+++ b/meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb
@@ -7,5 +7,5 @@ IMAGE_INSTALL += " \
 	"
 
 do_image_prepend() {
-    bb.warn("The image 'rpi-hwup-image' is deprecated, please use 'core-image-minimal' instead")
+    bb.warn("The image 'rpi-hwup-image' is deprecated, please use 'core-image-base' instead")
 }
diff --git a/meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb b/meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb
index 029c18cb7..d91ce0b31 100644
--- a/meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb
+++ b/meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb
@@ -1,6 +1,6 @@
 DESCRIPTION = "RaspberryPi Test Packagegroup"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
 inherit packagegroup
 
diff --git a/meta-raspberrypi/recipes-core/psplash/psplash_git.bbappend b/meta-raspberrypi/recipes-core/psplash/psplash_%.bbappend
index 698564b94..698564b94 100644
--- a/meta-raspberrypi/recipes-core/psplash/psplash_git.bbappend
+++ b/meta-raspberrypi/recipes-core/psplash/psplash_%.bbappend
diff --git a/meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb b/meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb
index b249d9726..edef0db9e 100644
--- a/meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb
+++ b/meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb
@@ -1,6 +1,6 @@
 DESCRIPTION = "udev rules for Raspberry Pi Boards"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
 SRC_URI = " file://99-com.rules"
 
diff --git a/meta-raspberrypi/recipes-devtools/wiringPi/files/0001-Add-initial-cross-compile-support.patch b/meta-raspberrypi/recipes-devtools/wiringpi/files/0001-Add-initial-cross-compile-support.patch
index 01e054634..01e054634 100644
--- a/meta-raspberrypi/recipes-devtools/wiringPi/files/0001-Add-initial-cross-compile-support.patch
+++ b/meta-raspberrypi/recipes-devtools/wiringpi/files/0001-Add-initial-cross-compile-support.patch
diff --git a/meta-raspberrypi/recipes-devtools/wiringPi/wiringpi_git.bb b/meta-raspberrypi/recipes-devtools/wiringpi/wiringpi_git.bb
index f1b01dbe5..f1b01dbe5 100644
--- a/meta-raspberrypi/recipes-devtools/wiringPi/wiringpi_git.bb
+++ b/meta-raspberrypi/recipes-devtools/wiringpi/wiringpi_git.bb
diff --git a/meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
index 919e95e0d..919e95e0d 100644
--- a/meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ b/meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
index 0478576de..acbd2250c 100644
--- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
+++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
@@ -1,6 +1,6 @@
-LINUX_VERSION ?= "4.14.39"
+LINUX_VERSION ?= "4.14.58"
 
-SRCREV = "865ddc1393f558198e7e7ce70928ff2e49c4f7f6"
+SRCREV = "a06f9e522301dfacc1f382d72e6a9792d8350328"
 SRC_URI = " \
     git://github.com/raspberrypi/linux.git;branch=rpi-4.14.y \
     file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
diff --git a/meta-raspberrypi/recipes-multimedia/x264/x264_git.bbappend b/meta-raspberrypi/recipes-multimedia/x264/x264_%.bbappend
index 505719efb..505719efb 100644
--- a/meta-raspberrypi/recipes-multimedia/x264/x264_git.bbappend
+++ b/meta-raspberrypi/recipes-multimedia/x264/x264_%.bbappend